--- /dev/null
+===================
+DPAA2 Documentation
+===================
+
+.. toctree::
+ :maxdepth: 1
+
+ overview
batman-adv
can
+ dpaa2/index
kapi
z8530book
msg_zerocopy
M: Laurentiu Tudor <laurentiu.tudor@nxp.com>
L: linux-kernel@vger.kernel.org
S: Maintained
-F: drivers/staging/fsl-mc/
+F: drivers/bus/fsl-mc/
F: Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
+F: Documentation/networking/dpaa2/overview.rst
QT1010 MEDIA DRIVER
M: Antti Palosaari <crope@iki.fi>
configuration. Allows to adjust the priorities of all master
peripherals.
+source "drivers/bus/fsl-mc/Kconfig"
+
endmenu
obj-$(CONFIG_ARM_CCN) += arm-ccn.o
obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmstb_gisb.o
+
+# DPAA2 fsl-mc bus
+obj-$(CONFIG_FSL_MC_BUS) += fsl-mc/
+
obj-$(CONFIG_IMX_WEIM) += imx-weim.o
obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# DPAA2 fsl-mc bus
+#
+# Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
+#
+
+config FSL_MC_BUS
+ bool "QorIQ DPAA2 fsl-mc bus driver"
+ depends on OF && (ARCH_LAYERSCAPE || (COMPILE_TEST && (ARM || ARM64 || X86 || PPC)))
+ select GENERIC_MSI_IRQ_DOMAIN
+ help
+ Driver to enable the bus infrastructure for the QorIQ DPAA2
+ architecture. The fsl-mc bus driver handles discovery of
+ DPAA2 objects (which are represented as Linux devices) and
+ binding objects to drivers.
--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+#
+# Freescale Management Complex (MC) bus drivers
+#
+# Copyright (C) 2014 Freescale Semiconductor, Inc.
+#
+obj-$(CONFIG_FSL_MC_BUS) += mc-bus-driver.o
+
+mc-bus-driver-objs := fsl-mc-bus.o \
+ mc-sys.o \
+ mc-io.o \
+ dprc.o \
+ dprc-driver.o \
+ fsl-mc-allocator.o \
+ fsl-mc-msi.o \
+ dpmcp.o
*
*/
#include <linux/kernel.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "fsl-mc-private.h"
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/msi.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "fsl-mc-private.h"
*
*/
#include <linux/kernel.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
+
#include "fsl-mc-private.h"
/**
#include <linux/module.h>
#include <linux/msi.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "fsl-mc-private.h"
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/msi.h>
+
#include "fsl-mc-private.h"
#ifdef GENERIC_MSI_DOMAIN_OPS
#ifndef _FSL_MC_PRIVATE_H_
#define _FSL_MC_PRIVATE_H_
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include <linux/mutex.h>
/*
*/
#include <linux/io.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "fsl-mc-private.h"
#include <linux/device.h>
#include <linux/io.h>
#include <linux/io-64-nonatomic-hi-lo.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "fsl-mc-private.h"
For a more detailed description of the DPAA2 architecture and its object
abstractions see:
- drivers/staging/fsl-mc/README.txt
+ Documentation/networking/dpaa2/overview.rst
Each Linux net device is built on top of a Datapath Network Interface (DPNI)
object and uses Buffer Pools (DPBPs), I/O Portals (DPIOs) and Concentrators
#include <linux/kthread.h>
#include <linux/iommu.h>
-#include "../../fsl-mc/include/mc.h"
+#include <linux/fsl/mc.h>
#include "dpaa2-eth.h"
/* CREATE_TRACE_POINTS only needs to be defined once. Other dpa files
*/
#include <linux/kernel.h>
#include <linux/errno.h>
-#include "../../fsl-mc/include/mc.h"
+#include <linux/fsl/mc.h>
#include "dpni.h"
#include "dpni-cmd.h"
+++ /dev/null
-* Add at least one device driver for a DPAA2 object (child device of the
- fsl-mc bus). Most likely candidate for this is adding DPAA2 Ethernet
- driver support, which depends on drivers for several objects: DPNI,
- DPIO, DPMAC. Other pre-requisites include:
-
- * MC firmware uprev. The MC firmware upon which the fsl-mc
- bus driver and DPAA2 object drivers are based is continuing
- to evolve, so minor updates are needed to keep in sync with binary
- interface changes to the MC.
-
-* Cleanup
-
-Please send any patches to Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
-german.rivera@freescale.com, devel@driverdev.osuosl.org,
-linux-kernel@vger.kernel.org
-
-[1] https://lkml.org/lkml/2015/7/9/93
-[2] https://lkml.org/lkml/2015/7/7/712
# Copyright (C) 2014-2016 Freescale Semiconductor, Inc.
#
-config FSL_MC_BUS
- bool "QorIQ DPAA2 fsl-mc bus driver"
- depends on OF && (ARCH_LAYERSCAPE || (COMPILE_TEST && (ARM || ARM64 || X86 || PPC)))
- select GENERIC_MSI_IRQ_DOMAIN
- help
- Driver to enable the bus infrastructure for the QorIQ DPAA2
- architecture. The fsl-mc bus driver handles discovery of
- DPAA2 objects (which are represented as Linux devices) and
- binding objects to drivers.
-
config FSL_MC_DPIO
tristate "QorIQ DPAA2 DPIO driver"
depends on FSL_MC_BUS && ARCH_LAYERSCAPE
#
# Copyright (C) 2014 Freescale Semiconductor, Inc.
#
-obj-$(CONFIG_FSL_MC_BUS) += mc-bus-driver.o
-
-mc-bus-driver-objs := fsl-mc-bus.o \
- mc-sys.o \
- mc-io.o \
- dprc.o \
- dprc-driver.o \
- fsl-mc-allocator.o \
- fsl-mc-msi.o \
- irq-gic-v3-its-fsl-mc-msi.o \
- dpmcp.o \
- dpbp.o \
- dpcon.o
+obj-$(CONFIG_FSL_MC_BUS) += irq-gic-v3-its-fsl-mc-msi.o \
+ dpbp.o \
+ dpcon.o
# MC DPIO driver
obj-$(CONFIG_FSL_MC_DPIO) += dpio/
*
*/
#include <linux/kernel.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "../include/dpbp.h"
#include "dpbp-cmd.h"
*
*/
#include <linux/kernel.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
#include "../include/dpcon.h"
#include "dpcon-cmd.h"
#include <linux/dma-mapping.h>
#include <linux/delay.h>
-#include "../../include/mc.h"
+#include <linux/fsl/mc.h>
#include "../../include/dpaa2-io.h"
#include "qbman-portal.h"
*
*/
#include <linux/types.h>
-#include "../../include/mc.h"
+#include <linux/fsl/mc.h>
#include "../../include/dpaa2-io.h"
#include <linux/init.h>
#include <linux/module.h>
*
*/
#include <linux/kernel.h>
-#include "../../include/mc.h"
+#include <linux/fsl/mc.h>
#include "dpio.h"
#include "dpio-cmd.h"
#include <linux/msi.h>
#include <linux/of.h>
#include <linux/of_irq.h>
-#include "../include/mc.h"
+#include <linux/fsl/mc.h>
static struct irq_chip its_msi_irq_chip = {
.name = "ITS-fMSI",
projects / linux.git / commitdiff