ARM: dts: at91: at91sam9x5: switch to new clock bindings

Switch at91sam9x5 boards to the new PMC clock bindings.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index 27de7dc0f0e09fad0448ce8b8e7e5088c389c848..b34a6c65bd4427260fa598a5729aad74b9d4e9cb 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -24,6 +24,10 @@ pinctrl@fffff400 {
                                       0x003fffff 0x003f8000 0x00000000  /* pioD */
                                      >;
                        };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index 0898213f3bb22e41df4612a51b71ac77034fede6..d8bb56253e64bf97d18f171d438f91e354edfc36 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -26,6 +26,10 @@ pinctrl@fffff400 {
                                       0x003fffff 0x003f8000 0x00000000  /* pioD */
                                      >;
                        };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 31fecc2cdaf91d8e2fbca0364a27876232fd92ea..ac730812a81d054c7e62a11dc05d65847a573630 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -32,9 +32,9 @@ ov2640: camera@30 {
                                        pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
                                        resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
                                        pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
-                                       clocks = <&pck0>;
+                                       clocks = <&pmc PMC_TYPE_SYSTEM 8>;
                                        clock-names = "xvclk";
-                                       assigned-clocks = <&pck0>;
+                                       assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
                                        assigned-clock-rates = <25000000>;
                                        status = "okay";
 

diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index ff4115886f97818c84c8c8b5d013500e9b3b400c..333e158feb61c3b48e27997cde1176df2c4a19a2 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -25,6 +25,10 @@ pinctrl@fffff400 {
                                       0x003fffff 0x003f8000 0x00000000  /* pioD */
                                      >;
                        };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 3c5fa3388997078dd206dfb5cb05a35a1752e963..a99703a262c987d581126f94a0a1e87552142369 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -27,6 +27,10 @@ pinctrl@fffff400 {
                                       0x003fffff 0x003f8000 0x00000000  /* pioD */
                                      >;
                        };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index d9054e8167b7c14f99a8cf66f245a49db630bf28..bca274d33f68f14dd723bb13ad8e4811d3325407 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -26,6 +26,10 @@ pinctrl@fffff400 {
                                       0x003fffff 0x003f8000 0x00000000  /* pioD */
                                      >;
                        };
+
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 11c0ef102ab1a2ce5d10d0221ce54b080015faeb..07443a387a8f6033e868512a716d55f64bd13afd 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,7 +111,7 @@ pmecc: ecc-engine@ffffe000 {
                        ramc0: ramc@ffffe800 {
                                compatible = "atmel,at91sam9g45-ddramc";
                                reg = <0xffffe800 0x200>;
-                               clocks = <&ddrck>;
+                               clocks = <&pmc PMC_TYPE_SYSTEM 2>;
                                clock-names = "ddrck";
                        };
 
@@ -124,269 +124,9 @@ pmc: pmc@fffffc00 {
                                compatible = "atmel,at91sam9x5-pmc", "syscon";
                                reg = <0xfffffc00 0x200>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-                               interrupt-controller;
-                               #address-cells = <1>;
-                               #size-cells = <0>;
-                               #interrupt-cells = <1>;
-
-                               main_rc_osc: main_rc_osc {
-                                       compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-                                       #clock-cells = <0>;
-                                       interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
-                                       clock-frequency = <12000000>;
-                                       clock-accuracy = <50000000>;
-                               };
-
-                               main_osc: main_osc {
-                                       compatible = "atmel,at91rm9200-clk-main-osc";
-                                       #clock-cells = <0>;
-                                       interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-                                       clocks = <&main_xtal>;
-                               };
-
-                               main: mainck {
-                                       compatible = "atmel,at91sam9x5-clk-main";
-                                       #clock-cells = <0>;
-                                       interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
-                                       clocks = <&main_rc_osc>, <&main_osc>;
-                               };
-
-                               plla: pllack {
-                                       compatible = "atmel,at91rm9200-clk-pll";
-                                       #clock-cells = <0>;
-                                       interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-                                       clocks = <&main>;
-                                       reg = <0>;
-                                       atmel,clk-input-range = <2000000 32000000>;
-                                       #atmel,pll-clk-output-range-cells = <4>;
-                                       atmel,pll-clk-output-ranges = <745000000 800000000 0 0
-                                                                      695000000 750000000 1 0
-                                                                      645000000 700000000 2 0
-                                                                      595000000 650000000 3 0
-                                                                      545000000 600000000 0 1
-                                                                      495000000 555000000 1 1
-                                                                      445000000 500000000 2 1
-                                                                      400000000 450000000 3 1>;
-                               };
-
-                               plladiv: plladivck {
-                                       compatible = "atmel,at91sam9x5-clk-plldiv";
-                                       #clock-cells = <0>;
-                                       clocks = <&plla>;
-                               };
-
-                               utmi: utmick {
-                                       compatible = "atmel,at91sam9x5-clk-utmi";
-                                       #clock-cells = <0>;
-                                       interrupts-extended = <&pmc AT91_PMC_LOCKU>;
-                                       clocks = <&main>;
-                               };
-
-                               mck: masterck {
-                                       compatible = "atmel,at91sam9x5-clk-master";
-                                       #clock-cells = <0>;
-                                       interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-                                       clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-                                       atmel,clk-output-range = <0 133333333>;
-                                       atmel,clk-divisors = <1 2 4 3>;
-                                       atmel,master-clk-have-div3-pres;
-                               };
-
-                               usb: usbck {
-                                       compatible = "atmel,at91sam9x5-clk-usb";
-                                       #clock-cells = <0>;
-                                       clocks = <&plladiv>, <&utmi>;
-                               };
-
-                               prog: progck {
-                                       compatible = "atmel,at91sam9x5-clk-programmable";
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
-                                       interrupt-parent = <&pmc>;
-                                       clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-                                       prog0: prog0 {
-                                               #clock-cells = <0>;
-                                               reg = <0>;
-                                               interrupts = <AT91_PMC_PCKRDY(0)>;
-                                       };
-
-                                       prog1: prog1 {
-                                               #clock-cells = <0>;
-                                               reg = <1>;
-                                               interrupts = <AT91_PMC_PCKRDY(1)>;
-                                       };
-                               };
-
-                               smd: smdclk {
-                                       compatible = "atmel,at91sam9x5-clk-smd";
-                                       #clock-cells = <0>;
-                                       clocks = <&plladiv>, <&utmi>;
-                               };
-
-                               systemck {
-                                       compatible = "atmel,at91rm9200-clk-system";
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
-
-                                       ddrck: ddrck {
-                                               #clock-cells = <0>;
-                                               reg = <2>;
-                                               clocks = <&mck>;
-                                       };
-
-                                       smdck: smdck {
-                                               #clock-cells = <0>;
-                                               reg = <4>;
-                                               clocks = <&smd>;
-                                       };
-
-                                       uhpck: uhpck {
-                                               #clock-cells = <0>;
-                                               reg = <6>;
-                                               clocks = <&usb>;
-                                       };
-
-                                       udpck: udpck {
-                                               #clock-cells = <0>;
-                                               reg = <7>;
-                                               clocks = <&usb>;
-                                       };
-
-                                       pck0: pck0 {
-                                               #clock-cells = <0>;
-                                               reg = <8>;
-                                               clocks = <&prog0>;
-                                       };
-
-                                       pck1: pck1 {
-                                               #clock-cells = <0>;
-                                               reg = <9>;
-                                               clocks = <&prog1>;
-                                       };
-                               };
-
-                               periphck {
-                                       compatible = "atmel,at91sam9x5-clk-peripheral";
-                                       #address-cells = <1>;
-                                       #size-cells = <0>;
-                                       clocks = <&mck>;
-
-                                       pioAB_clk: pioAB_clk {
-                                               #clock-cells = <0>;
-                                               reg = <2>;
-                                       };
-
-                                       pioCD_clk: pioCD_clk {
-                                               #clock-cells = <0>;
-                                               reg = <3>;
-                                       };
-
-                                       smd_clk: smd_clk {
-                                               #clock-cells = <0>;
-                                               reg = <4>;
-                                       };
-
-                                       usart0_clk: usart0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <5>;
-                                       };
-
-                                       usart1_clk: usart1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <6>;
-                                       };
-
-                                       usart2_clk: usart2_clk {
-                                               #clock-cells = <0>;
-                                               reg = <7>;
-                                       };
-
-                                       twi0_clk: twi0_clk {
-                                               reg = <9>;
-                                               #clock-cells = <0>;
-                                       };
-
-                                       twi1_clk: twi1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <10>;
-                                       };
-
-                                       twi2_clk: twi2_clk {
-                                               #clock-cells = <0>;
-                                               reg = <11>;
-                                       };
-
-                                       mci0_clk: mci0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <12>;
-                                       };
-
-                                       spi0_clk: spi0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <13>;
-                                       };
-
-                                       spi1_clk: spi1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <14>;
-                                       };
-
-                                       uart0_clk: uart0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <15>;
-                                       };
-
-                                       uart1_clk: uart1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <16>;
-                                       };
-
-                                       tcb0_clk: tcb0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <17>;
-                                       };
-
-                                       pwm_clk: pwm_clk {
-                                               #clock-cells = <0>;
-                                               reg = <18>;
-                                       };
-
-                                       adc_clk: adc_clk {
-                                               #clock-cells = <0>;
-                                               reg = <19>;
-                                       };
-
-                                       dma0_clk: dma0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <20>;
-                                       };
-
-                                       dma1_clk: dma1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <21>;
-                                       };
-
-                                       uhphs_clk: uhphs_clk {
-                                               #clock-cells = <0>;
-                                               reg = <22>;
-                                       };
-
-                                       udphs_clk: udphs_clk {
-                                               #clock-cells = <0>;
-                                               reg = <23>;
-                                       };
-
-                                       mci1_clk: mci1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <26>;
-                                       };
-
-                                       ssc0_clk: ssc0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <28>;
-                                       };
-                               };
+                               #clock-cells = <2>;
+                               clocks = <&clk32k>, <&main_xtal>;
+                               clock-names = "slow_clk", "main_xtal";
                        };
 
                        reset_controller: rstc@fffffe00 {
@@ -405,7 +145,7 @@ pit: timer@fffffe30 {
                                compatible = "atmel,at91sam9260-pit";
                                reg = <0xfffffe30 0xf>;
                                interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-                               clocks = <&mck>;
+                               clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
                        };
 
                        sckc@fffffe50 {
@@ -438,7 +178,7 @@ tcb0: timer@f8008000 {
                                #size-cells = <0>;
                                reg = <0xf8008000 0x100>;
                                interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&tcb0_clk>, <&clk32k>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
                                clock-names = "t0_clk", "slow_clk";
                        };
 
@@ -448,7 +188,7 @@ tcb1: timer@f800c000 {
                                #size-cells = <0>;
                                reg = <0xf800c000 0x100>;
                                interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&tcb0_clk>, <&clk32k>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
                                clock-names = "t0_clk", "slow_clk";
                        };
 
@@ -457,7 +197,7 @@ dma0: dma-controller@ffffec00 {
                                reg = <0xffffec00 0x200>;
                                interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
                                #dma-cells = <2>;
-                               clocks = <&dma0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
                                clock-names = "dma_clk";
                        };
 
@@ -466,7 +206,7 @@ dma1: dma-controller@ffffee00 {
                                reg = <0xffffee00 0x200>;
                                interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
                                #dma-cells = <2>;
-                               clocks = <&dma1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
                                clock-names = "dma_clk";
                        };
 
@@ -864,7 +604,7 @@ pioA: gpio@fffff400 {
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
-                                       clocks = <&pioAB_clk>;
+                                       clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
                                };
 
                                pioB: gpio@fffff600 {
@@ -876,7 +616,7 @@ pioB: gpio@fffff600 {
                                        #gpio-lines = <19>;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
-                                       clocks = <&pioAB_clk>;
+                                       clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
                                };
 
                                pioC: gpio@fffff800 {
@@ -887,7 +627,7 @@ pioC: gpio@fffff800 {
                                        gpio-controller;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
-                                       clocks = <&pioCD_clk>;
+                                       clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
                                };
 
                                pioD: gpio@fffffa00 {
@@ -899,7 +639,7 @@ pioD: gpio@fffffa00 {
                                        #gpio-lines = <22>;
                                        interrupt-controller;
                                        #interrupt-cells = <2>;
-                                       clocks = <&pioCD_clk>;
+                                       clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
                                };
                        };
 
@@ -912,7 +652,7 @@ ssc0: ssc@f0010000 {
                                dma-names = "tx", "rx";
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-                               clocks = <&ssc0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
                                clock-names = "pclk";
                                status = "disabled";
                        };
@@ -924,7 +664,7 @@ mmc0: mmc@f0008000 {
                                dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
                                dma-names = "rxtx";
                                pinctrl-names = "default";
-                               clocks = <&mci0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
                                clock-names = "mci_clk";
                                #address-cells = <1>;
                                #size-cells = <0>;
@@ -938,7 +678,7 @@ mmc1: mmc@f000c000 {
                                dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
                                dma-names = "rxtx";
                                pinctrl-names = "default";
-                               clocks = <&mci1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
                                clock-names = "mci_clk";
                                #address-cells = <1>;
                                #size-cells = <0>;
@@ -954,7 +694,7 @@ dbgu: serial@fffff200 {
                                dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
                                       <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
                                dma-names = "tx", "rx";
-                               clocks = <&mck>;
+                               clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
                                clock-names = "usart";
                                status = "disabled";
                        };
@@ -968,7 +708,7 @@ usart0: serial@f801c000 {
                                dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
                                       <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
                                dma-names = "tx", "rx";
-                               clocks = <&usart0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
                                clock-names = "usart";
                                status = "disabled";
                        };
@@ -982,7 +722,7 @@ usart1: serial@f8020000 {
                                dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
                                       <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
                                dma-names = "tx", "rx";
-                               clocks = <&usart1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
                                clock-names = "usart";
                                status = "disabled";
                        };
@@ -996,7 +736,7 @@ usart2: serial@f8024000 {
                                dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
                                       <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
                                dma-names = "tx", "rx";
-                               clocks = <&usart2_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
                                clock-names = "usart";
                                status = "disabled";
                        };
@@ -1012,7 +752,7 @@ i2c0: i2c@f8010000 {
                                #size-cells = <0>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_i2c0>;
-                               clocks = <&twi0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
                                status = "disabled";
                        };
 
@@ -1027,7 +767,7 @@ i2c1: i2c@f8014000 {
                                #size-cells = <0>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_i2c1>;
-                               clocks = <&twi1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
                                status = "disabled";
                        };
 
@@ -1042,7 +782,7 @@ i2c2: i2c@f8018000 {
                                #size-cells = <0>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_i2c2>;
-                               clocks = <&twi2_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
                                status = "disabled";
                        };
 
@@ -1052,7 +792,7 @@ uart0: serial@f8040000 {
                                interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart0>;
-                               clocks = <&uart0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
                                clock-names = "usart";
                                status = "disabled";
                        };
@@ -1063,7 +803,7 @@ uart1: serial@f8044000 {
                                interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_uart1>;
-                               clocks = <&uart1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
                                clock-names = "usart";
                                status = "disabled";
                        };
@@ -1074,7 +814,7 @@ adc0: adc@f804c000 {
                                compatible = "atmel,at91sam9x5-adc";
                                reg = <0xf804c000 0x100>;
                                interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&adc_clk>,
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
                                         <&adc_op_clk>;
                                clock-names = "adc_clk", "adc_op_clk";
                                atmel,adc-use-external-triggers;
@@ -1121,7 +861,7 @@ spi0: spi@f0000000 {
                                dma-names = "tx", "rx";
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_spi0>;
-                               clocks = <&spi0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
                                clock-names = "spi_clk";
                                status = "disabled";
                        };
@@ -1137,7 +877,7 @@ spi1: spi@f0004000 {
                                dma-names = "tx", "rx";
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_spi1>;
-                               clocks = <&spi1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
                                clock-names = "spi_clk";
                                status = "disabled";
                        };
@@ -1149,7 +889,7 @@ usb2: gadget@f803c000 {
                                reg = <0x00500000 0x80000
                                       0xf803c000 0x400>;
                                interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&utmi>, <&udphs_clk>;
+                               clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
                                clock-names = "hclk", "pclk";
                                status = "disabled";
 
@@ -1229,7 +969,7 @@ pwm0: pwm@f8034000 {
                                compatible = "atmel,at91sam9rl-pwm";
                                reg = <0xf8034000 0x300>;
                                interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
-                               clocks = <&pwm_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
                                #pwm-cells = <3>;
                                status = "disabled";
                        };
@@ -1239,7 +979,7 @@ usb0: ohci@600000 {
                        compatible = "atmel,at91rm9200-ohci", "usb-ohci";
                        reg = <0x00600000 0x100000>;
                        interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-                       clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+                       clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
                        clock-names = "ohci_clk", "hclk", "uhpck";
                        status = "disabled";
                };
@@ -1248,7 +988,7 @@ usb1: ehci@700000 {
                        compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
                        reg = <0x00700000 0x100000>;
                        interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-                       clocks = <&utmi>, <&uhphs_clk>;
+                       clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
                        clock-names = "usb_clk", "ehci_clk";
                        status = "disabled";
                };
@@ -1266,7 +1006,7 @@ ebi: ebi@10000000 {
                                  0x3 0x0 0x40000000 0x10000000
                                  0x4 0x0 0x50000000 0x10000000
                                  0x5 0x0 0x60000000 0x10000000>;
-                       clocks = <&mck>;
+                       clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
                        status = "disabled";
 
                        nand_controller: nand-controller {

diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
index 8eb2f9c1b97847d94db2cf58b57f5c82b423832f..125f9e3b49adde6d2d64cca76f0cdaa8c34489ed 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -13,27 +13,13 @@
 / {
        ahb {
                apb {
-                       pmc: pmc@fffffc00 {
-                               periphck {
-                                       can0_clk: can0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <29>;
-                                       };
-
-                                       can1_clk: can1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <30>;
-                                       };
-                               };
-                       };
-
                        can0: can@f8000000 {
                                compatible = "atmel,at91sam9x5-can";
                                reg = <0xf8000000 0x300>;
                                interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_can0_rx_tx>;
-                               clocks = <&can0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
                                clock-names = "can_clk";
                                status = "disabled";
                        };
@@ -44,7 +30,7 @@ can1: can@f8004000 {
                                interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_can1_rx_tx>;
-                               clocks = <&can1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
                                clock-names = "can_clk";
                                status = "disabled";
                        };

diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
index 8fc45ca4dcb58a0d8d2e7a086e7437df330b6259..c3e45b57b6a2e84061440b3ae4b96d9b55988953 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -44,22 +44,13 @@ pinctrl_isi_data_10_11: isi-0-data-10-11 {
                                };
                        };
 
-                       pmc: pmc@fffffc00 {
-                               periphck {
-                                       isi_clk: isi_clk {
-                                               #clock-cells = <0>;
-                                               reg = <25>;
-                                       };
-                               };
-                       };
-
                        isi: isi@f8048000 {
                                compatible = "atmel,at91sam9g45-isi";
                                reg = <0xf8048000 0x4000>;
                                interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_isi_data_0_7>;
-                               clocks = <&isi_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
                                clock-names = "isi_clk";
                                status = "disabled";
                                port {

diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 1629db9dd56365c7b32ae96b91e55a12f271bdb8..12595fb116919f57049e0971c59d5585d529dda4 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -17,7 +17,7 @@ hlcdc: hlcdc@f8038000 {
                                compatible = "atmel,at91sam9x5-hlcdc";
                                reg = <0xf8038000 0x4000>;
                                interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-                               clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
                                clock-names = "periph_clk","sys_clk", "slow_clk";
                                status = "disabled";
 
@@ -143,23 +143,6 @@ AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE       /* LCDD22 pin */
                                        };
                                };
                        };
-
-                       pmc: pmc@fffffc00 {
-                               periphck {
-                                       lcdc_clk: lcdc_clk {
-                                               #clock-cells = <0>;
-                                               reg = <25>;
-                                       };
-                               };
-
-                               systemck {
-                                       lcdck: lcdck {
-                                               #clock-cells = <0>;
-                                               reg = <3>;
-                                               clocks = <&mck>;
-                                       };
-                               };
-                       };
                };
        };
 };

diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 73d7e30965badd14366540fe2cb9ce6780d67f2e..57c2e5a4fb53d195c27915fd61f2088896a67b4a 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,22 +43,13 @@ AT91_PIOB 16 AT91_PERIPH_A AT91_PINCTRL_NONE        /* PB16 periph A */
                                };
                        };
 
-                       pmc: pmc@fffffc00 {
-                               periphck {
-                                       macb0_clk: macb0_clk {
-                                               #clock-cells = <0>;
-                                               reg = <24>;
-                                       };
-                               };
-                       };
-
                        macb0: ethernet@f802c000 {
                                compatible = "cdns,at91sam9260-macb", "cdns,macb";
                                reg = <0xf802c000 0x100>;
                                interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_macb0_rmii>;
-                               clocks = <&macb0_clk>, <&macb0_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
                                clock-names = "hclk", "pclk";
                                status = "disabled";
                        };

diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index d81980c40c7d05a7525fcb1b9f1b09892325dc26..59b8da87d3c1efb0861232a8ce5169072deb94a8 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,22 +31,13 @@ AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE        /* PC30 periph B */
                                };
                        };
 
-                       pmc: pmc@fffffc00 {
-                               periphck {
-                                       macb1_clk: macb1_clk {
-                                               #clock-cells = <0>;
-                                               reg = <27>;
-                                       };
-                               };
-                       };
-
                        macb1: ethernet@f8030000 {
                                compatible = "cdns,at91sam9260-macb", "cdns,macb";
                                reg = <0xf8030000 0x100>;
                                interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_macb1_rmii>;
-                               clocks = <&macb1_clk>, <&macb1_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
                                clock-names = "hclk", "pclk";
                                status = "disabled";
                        };

diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index a32d12b406a301810a44d2d01c4162b5d2650715..9102dfbed5d861828f53c6998b1dca4a03df18a0 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,15 +42,6 @@ pinctrl_usart3_sck: usart3_sck-0 {
                                };
                        };
 
-                       pmc: pmc@fffffc00 {
-                               periphck {
-                                       usart3_clk: usart3_clk {
-                                               #clock-cells = <0>;
-                                               reg = <8>;
-                                       };
-                               };
-                       };
-
                        usart3: serial@f8028000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8028000 0x200>;
@@ -60,7 +51,7 @@ usart3: serial@f8028000 {
                                dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
                                       <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
                                dma-names = "tx", "rx";
-                               clocks = <&usart3_clk>;
+                               clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
                                clock-names = "usart";
                                status = "disabled";
                        };