dt-bindings: iio: adc: sd-modulator: fix io-channel-cells

io-channel-cells should be <0> since sigma delta modulator exports only
one channel, as described in ../iio/iio-bindings.txt "IIO providers"
section. Only the phandle is necessary for IIO consumers in this case.

Fixes: af11143757b7 ("IIO: Add DT bindings for sigma delta adc modulator")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

diff --git a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
index e9ebb8a20e0d8c4ba0a386b6437bedc698459aa5..ba24ca7ba95edfd8a6b0c3a107c551662df6f1a0 100644 (file)
--- a/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
+++ b/Documentation/devicetree/bindings/iio/adc/sigma-delta-modulator.txt
@@ -3,11 +3,11 @@ Device-Tree bindings for sigma delta modulator
 Required properties:
 - compatible: should be "ads1201", "sd-modulator". "sd-modulator" can be use
        as a generic SD modulator if modulator not specified in compatible list.
-- #io-channel-cells = <1>: See the IIO bindings section "IIO consumers".
+- #io-channel-cells = <0>: See the IIO bindings section "IIO consumers".
 
 Example node:
 
        ads1202: adc@0 {
                compatible = "sd-modulator";
-               #io-channel-cells = <1>;
+               #io-channel-cells = <0>;
        };