drivers/net: delete 486 Apricot support

The Apricot was a 486 PC with 4MB RAM, and an on-board ethernet
via an intel i82596 hard-wired to i/o 0x300.

Those who were using linux in the 1990's will recall that the
i82596 driver was not one of the more stable or widely used
drivers of its day.  Combine that with the extremely limited
resources of the platform, and it is truly time to expire the
support for this thing.

There are some old m68k targets who were also using this chip,
so rather than poll the m68k user base, we simply cut out the
x86/Apricot support here in this commit.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 5637c2671415f6838e04d05b6f3a23f40c16804c..c6e51943caafece0871f107c82a2c3a7d6a4e698 100644 (file)
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -165,7 +165,7 @@ static struct devprobe2 isa_probes[] __initdata = {
 #ifdef CONFIG_EWRK3             /* DEC EtherWORKS 3 */
        {ewrk3_probe, 0},
 #endif
-#if defined(CONFIG_APRICOT) || defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET)     /* Intel I82596 */
+#if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET)        /* Intel I82596 */
        {i82596_probe, 0},
 #endif
 #ifdef CONFIG_EL1              /* 3c501 */

diff --git a/drivers/net/ethernet/i825xx/82596.c b/drivers/net/ethernet/i825xx/82596.c
index 6aa927af382c7bff2a0b1b0d96bca0e2026f30ae..1c54e229e3cc94ed8ff0eb630bd9acc70cb20a8d 100644 (file)
--- a/drivers/net/ethernet/i825xx/82596.c
+++ b/drivers/net/ethernet/i825xx/82596.c
@@ -95,9 +95,6 @@ static char version[] __initdata =
 #if defined(CONFIG_BVME6000_NET) || defined(CONFIG_BVME6000_NET_MODULE)
 #define ENABLE_BVME6000_NET
 #endif
-#if defined(CONFIG_APRICOT) || defined(CONFIG_APRICOT_MODULE)
-#define ENABLE_APRICOT
-#endif
 
 #ifdef ENABLE_MVME16x_NET
 #include <asm/mvme16xhw.h>
@@ -120,8 +117,15 @@ static char version[] __initdata =
 #define WSWAPtbd(x)  ((struct i596_tbd *) (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 #define WSWAPchar(x) ((char *)            (((u32)(x)<<16) | ((((u32)(x)))>>16)))
 #define ISCP_BUSY      0x00010000
-#define MACH_IS_APRICOT        0
 #else
+#error 82596.c: unknown architecture
+#endif
+
+/*
+ * These were the intel versions, left here for reference. There
+ * are currently no x86 users of this legacy i82596 chip.
+ */
+#if 0
 #define WSWAPrfd(x)     ((struct i596_rfd *)((long)x))
 #define WSWAPrbd(x)     ((struct i596_rbd *)((long)x))
 #define WSWAPiscp(x)    ((struct i596_iscp *)((long)x))
@@ -130,7 +134,6 @@ static char version[] __initdata =
 #define WSWAPtbd(x)     ((struct i596_tbd *)((long)x))
 #define WSWAPchar(x)    ((char *)((long)x))
 #define ISCP_BUSY      0x0001
-#define MACH_IS_APRICOT        1
 #endif
 
 /*
@@ -383,11 +386,6 @@ static inline void CA(struct net_device *dev)
                i = *(volatile u32 *) (dev->base_addr);
        }
 #endif
-#ifdef ENABLE_APRICOT
-       if (MACH_IS_APRICOT) {
-               outw(0, (short) (dev->base_addr) + 4);
-       }
-#endif
 }
 
 
@@ -617,9 +615,6 @@ static void rebuild_rx_bufs(struct net_device *dev)
 static int init_i596_mem(struct net_device *dev)
 {
        struct i596_private *lp = dev->ml_priv;
-#if !defined(ENABLE_MVME16x_NET) && !defined(ENABLE_BVME6000_NET) || defined(ENABLE_APRICOT)
-       short ioaddr = dev->base_addr;
-#endif
        unsigned long flags;
 
        MPU_PORT(dev, PORT_RESET, NULL);
@@ -653,18 +648,6 @@ static int init_i596_mem(struct net_device *dev)
 
        MPU_PORT(dev, PORT_ALTSCP, (void *)virt_to_bus((void *)&lp->scp));
 
-#elif defined(ENABLE_APRICOT)
-
-       {
-               u32 scp = virt_to_bus(&lp->scp);
-
-               /* change the scp address */
-               outw(0, ioaddr);
-               outw(0, ioaddr);
-               outb(4, ioaddr + 0xf);
-               outw(scp | 2, ioaddr);
-               outw(scp >> 16, ioaddr);
-       }
 #endif
 
        lp->last_cmd = jiffies;
@@ -677,10 +660,6 @@ static int init_i596_mem(struct net_device *dev)
        if (MACH_IS_BVME6000)
                lp->scp.sysbus = 0x0000004c;
 #endif
-#ifdef ENABLE_APRICOT
-       if (MACH_IS_APRICOT)
-               lp->scp.sysbus = 0x00440000;
-#endif
 
        lp->scp.iscp = WSWAPiscp(virt_to_bus((void *)&lp->iscp));
        lp->iscp.scb = WSWAPscb(virt_to_bus((void *)&lp->scb));
@@ -698,10 +677,6 @@ static int init_i596_mem(struct net_device *dev)
 
        DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
 
-#if defined(ENABLE_APRICOT)
-       (void) inb(ioaddr + 0x10);
-       outb(4, ioaddr + 0xf);
-#endif
        CA(dev);
 
        if (wait_istat(dev,lp,1000,"initialization timed out"))
@@ -1202,43 +1177,6 @@ struct net_device * __init i82596_probe(int unit)
                dev->irq = (unsigned) BVME_IRQ_I596;
                goto found;
        }
-#endif
-#ifdef ENABLE_APRICOT
-       {
-               int checksum = 0;
-               int ioaddr = 0x300;
-
-               /* this is easy the ethernet interface can only be at 0x300 */
-               /* first check nothing is already registered here */
-
-               if (!request_region(ioaddr, I596_TOTAL_SIZE, DRV_NAME)) {
-                       printk(KERN_ERR "82596: IO address 0x%04x in use\n", ioaddr);
-                       err = -EBUSY;
-                       goto out;
-               }
-
-               dev->base_addr = ioaddr;
-
-               for (i = 0; i < 8; i++) {
-                       eth_addr[i] = inb(ioaddr + 8 + i);
-                       checksum += eth_addr[i];
-               }
-
-               /* checksum is a multiple of 0x100, got this wrong first time
-                  some machines have 0x100, some 0x200. The DOS driver doesn't
-                  even bother with the checksum.
-                  Some other boards trip the checksum.. but then appear as
-                  ether address 0. Trap these - AC */
-
-               if ((checksum % 0x100) ||
-                   (memcmp(eth_addr, "\x00\x00\x49", 3) != 0)) {
-                       err = -ENODEV;
-                       goto out1;
-               }
-
-               dev->irq = 10;
-               goto found;
-       }
 #endif
        err = -ENODEV;
        goto out;
@@ -1296,9 +1234,6 @@ struct net_device * __init i82596_probe(int unit)
 #endif
        free_page ((u32)(dev->mem_start));
 out1:
-#ifdef ENABLE_APRICOT
-       release_region(dev->base_addr, I596_TOTAL_SIZE);
-#endif
 out:
        free_netdev(dev);
        return ERR_PTR(err);
@@ -1454,10 +1389,6 @@ static irqreturn_t i596_interrupt(int irq, void *dev_id)
                *ethirq = 1;
                *ethirq = 3;
        }
-#endif
-#ifdef ENABLE_APRICOT
-       (void) inb(ioaddr + 0x10);
-       outb(4, ioaddr + 0xf);
 #endif
        CA(dev);
 
@@ -1589,11 +1520,6 @@ static void set_multicast_list(struct net_device *dev)
 #ifdef MODULE
 static struct net_device *dev_82596;
 
-#ifdef ENABLE_APRICOT
-module_param(irq, int, 0);
-MODULE_PARM_DESC(irq, "Apricot IRQ number");
-#endif
-
 static int debug = -1;
 module_param(debug, int, 0);
 MODULE_PARM_DESC(debug, "i82596 debug mask");
@@ -1620,10 +1546,6 @@ void __exit cleanup_module(void)
                        IOMAP_FULL_CACHING);
 #endif
        free_page ((u32)(dev_82596->mem_start));
-#ifdef ENABLE_APRICOT
-       /* If we don't do this, we can't re-insmod it later. */
-       release_region(dev_82596->base_addr, I596_TOTAL_SIZE);
-#endif
        free_netdev(dev_82596);
 }
 

diff --git a/drivers/net/ethernet/i825xx/Kconfig b/drivers/net/ethernet/i825xx/Kconfig
index 70f8c2d221b63b91854f31f84421f76c7f5ffc42..c39698ae9801688c0c6481357bdf5a893f7b3eb5 100644 (file)
--- a/drivers/net/ethernet/i825xx/Kconfig
+++ b/drivers/net/ethernet/i825xx/Kconfig
@@ -50,17 +50,6 @@ config ARM_ETHER1
          If you have an Acorn system with one of these (AKA25) network cards,
          you should say Y to this option if you wish to use it with Linux.
 
-config APRICOT
-       tristate "Apricot Xen-II on board Ethernet"
-       depends on ISA
-       ---help---
-         If you have a network (Ethernet) controller of this type, say Y and
-         read the Ethernet-HOWTO, available from
-         <http://www.tldp.org/docs.html#howto>.
-
-         To compile this driver as a module, choose M here. The module
-         will be called apricot.
-
 config BVME6000_NET
        tristate "BVME6000 Ethernet support"
        depends on BVME6000

diff --git a/drivers/net/ethernet/i825xx/Makefile b/drivers/net/ethernet/i825xx/Makefile
index 6adff85e8ecc3bcefe25c3f408e1e3d39c9f8b08..e5ab9d04a1802a231c78355adc1a3e1b089ccb3b 100644 (file)
--- a/drivers/net/ethernet/i825xx/Makefile
+++ b/drivers/net/ethernet/i825xx/Makefile
@@ -11,7 +11,6 @@ obj-$(CONFIG_LP486E) += lp486e.o
 obj-$(CONFIG_NI52) += ni52.o
 obj-$(CONFIG_SUN3_82586) += sun3_82586.o
 obj-$(CONFIG_ZNET) += znet.o
-obj-$(CONFIG_APRICOT) += 82596.o
 obj-$(CONFIG_LASI_82596) += lasi_82596.o
 obj-$(CONFIG_SNI_82596) += sni_82596.o
 obj-$(CONFIG_MVME16x_NET) += 82596.o