dt-bindings: Add Innolux P097PFG panel bindings

The Innolux P097PFG panel is 9.7" panel with 1536X2048
resolution, it reuse P079ZCA panel driver, so improve
p079ZCA dt-binding to support P097PFG.

Changes in v2:
- None
Changes in v3:
- None
Changes in v4:
- None
Changes in v5:
- use separate file for binding
- keep power supplies as required

Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180702102721.3546-4-heiko@sntech.de

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
new file mode 100644 (file)
index 0000000..595d9df
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p097pfg.txt
@@ -0,0 +1,24 @@
+Innolux P097PFG 9.7" 1536x2048 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p097pfg"
+- reg: DSI virtual channel of the peripheral
+- avdd-supply: phandle of the regulator that provides positive voltage
+- avee-supply: phandle of the regulator that provides negative voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+       &mipi_dsi {
+               panel {
+                       compatible = "innolux,p079zca";
+                       reg = <0>;
+                       avdd-supply = <...>;
+                       avee-supply = <...>;
+                       backlight = <&backlight>;
+                       enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+               };
+       };