ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi

Add the common parts for the dk04 boards.

Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
new file mode 100644 (file)
index 0000000..7c1eb19
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -0,0 +1,111 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018, The Linux Foundation. All rights reserved.
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+       model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK04.1";
+
+       aliases {
+               serial0 = &blsp1_uart1;
+               serial1 = &blsp1_uart2;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       memory {
+               device_type = "memory";
+               reg = <0x80000000 0x10000000>; /* 256MB */
+       };
+
+       soc {
+               pinctrl@1000000 {
+                       serial_0_pins: serial0-pinmux {
+                               pins = "gpio16", "gpio17";
+                               function = "blsp_uart0";
+                               bias-disable;
+                       };
+
+                       serial_1_pins: serial1-pinmux {
+                               pins = "gpio8", "gpio9",
+                                       "gpio10", "gpio11";
+                               function = "blsp_uart1";
+                               bias-disable;
+                       };
+
+                       spi_0_pins: spi-0-pinmux {
+                               pinmux {
+                                       function = "blsp_spi0";
+                                       pins = "gpio13", "gpio14", "gpio15";
+                                       bias-disable;
+                               };
+                               pinmux_cs {
+                                       function = "gpio";
+                                       pins = "gpio12";
+                                       bias-disable;
+                                       output-high;
+                               };
+                       };
+
+                       i2c_0_pins: i2c-0-pinmux {
+                               pins = "gpio20", "gpio21";
+                               function = "blsp_i2c0";
+                               bias-disable;
+                       };
+
+                       nand_pins: nand-pins {
+                               pins = "gpio53", "gpio55", "gpio56",
+                                       "gpio57", "gpio58", "gpio59",
+                                       "gpio60", "gpio62", "gpio63",
+                                       "gpio64", "gpio65", "gpio66",
+                                       "gpio67", "gpio68", "gpio69";
+                               function = "qpic";
+                       };
+               };
+
+               serial@78af000 {
+                       pinctrl-0 = <&serial_0_pins>;
+                       pinctrl-names = "default";
+                       status = "ok";
+               };
+
+               serial@78b0000 {
+                       pinctrl-0 = <&serial_1_pins>;
+                       pinctrl-names = "default";
+                       status = "ok";
+               };
+
+               dma@7884000 {
+                       status = "ok";
+               };
+
+               spi@78b5000 { /* BLSP1 QUP1 */
+                       pinctrl-0 = <&spi_0_pins>;
+                       pinctrl-names = "default";
+                       status = "ok";
+                       cs-gpios = <&tlmm 12 0>;
+
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               reg = <0>;
+                               compatible = "n25q128a11";
+                               spi-max-frequency = <24000000>;
+                       };
+               };
+
+               pci@40000000 {
+                       status = "ok";
+                       perst-gpio = <&tlmm 38 0x1>;
+               };
+
+               qpic-nand@79b0000 {
+                       pinctrl-0 = <&nand_pins>;
+                       pinctrl-names = "default";
+               };
+       };
+};

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index ad61a55f8d90644f3ff09436f862f8ee49809a5e..7bcd7635e723825a418bef408ea79f1fa262573a 100644 (file)
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -323,7 +323,7 @@ blsp1_uart1: serial@78af000 {
                        dma-names = "rx", "tx";
                };
 
-               serial@78b0000 {
+               blsp1_uart2: serial@78b0000 {
                        compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
                        reg = <0x78b0000 0x200>;
                        interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;