]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
serial: uartps: Fix stuck ISR if RX disabled with non-empty FIFO
authorAnssi Hannula <anssi.hannula@bitwise.fi>
Fri, 15 Feb 2019 16:45:08 +0000 (18:45 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 19 Feb 2019 12:42:07 +0000 (13:42 +0100)
If RX is disabled while there are still unprocessed bytes in RX FIFO,
cdns_uart_handle_rx() called from interrupt handler will get stuck in
the receive loop as read bytes will not get removed from the RX FIFO
and CDNS_UART_SR_RXEMPTY bit will never get set.

Avoid the stuck handler by checking first if RX is disabled. port->lock
protects against race with RX-disabling functions.

This HW behavior was mentioned by Nathan Rossi in 43e98facc4a3 ("tty:
xuartps: Fix RX hang, and TX corruption in termios call") which fixed a
similar issue in cdns_uart_set_termios().
The behavior can also be easily verified by e.g. setting
CDNS_UART_CR_RX_DIS at the beginning of cdns_uart_handle_rx() - the
following loop will then get stuck.

Resetting the FIFO using RXRST would not set RXEMPTY either so simply
issuing a reset after RX-disable would not work.

I observe this frequently on a ZynqMP board during heavy RX load at 1M
baudrate when the reader process exits and thus RX gets disabled.

Fixes: 61ec9016988f ("tty/serial: add support for Xilinx PS UART")
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/xilinx_uartps.c

index 094f2958cb2bb8db3298fd40fa268eae55dc7f65..ee9f18c52d2941e92680146643a42da70edaf9c1 100644 (file)
@@ -364,7 +364,13 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
                cdns_uart_handle_tx(dev_id);
                isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
        }
-       if (isrstatus & CDNS_UART_IXR_RXMASK)
+
+       /*
+        * Skip RX processing if RX is disabled as RXEMPTY will never be set
+        * as read bytes will not be removed from the FIFO.
+        */
+       if (isrstatus & CDNS_UART_IXR_RXMASK &&
+           !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
                cdns_uart_handle_rx(dev_id, isrstatus);
 
        spin_unlock(&port->lock);