ARM i.MX dts: Consistently add labels to devicenodes

Having labels before each node allows board bindings to reference
to nodes by using the &nodename {} notation. This way boards do not
have to resemble the whole devicetree layout. Due to less indention
needed the board files also get better readability. Since the label
make the documentation behind the nodes unnecessary it is removed.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 67d672792b0ddd1c8ea48bf5df4a309d48aa04ae..b8d3905915acaf7a296e880cbcfee0023e8b1da3 100644 (file)
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -58,7 +58,7 @@ aipi@10000000 { /* AIPI1 */
                        reg = <0x10000000 0x10000000>;
                        ranges;
 
-                       wdog@10002000 {
+                       wdog: wdog@10002000 {
                                compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
                                reg = <0x10002000 0x4000>;
                                interrupts = <27>;
@@ -218,7 +218,8 @@ fec: ethernet@1002b000 {
                                status = "disabled";
                        };
                };
-               nand@d8000000 {
+
+               nfc: nand@d8000000 {
                        #address-cells = <1>;
                        #size-cells = <1>;
 

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 0bc8ae70196710da523aaa6206757e19874842a9..1fdee31b4909d27d3362dfb441814935e58d73ae 100644 (file)
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -76,14 +76,14 @@ spba@70000000 {
                                reg = <0x70000000 0x40000>;
                                ranges;
 
-                               esdhc@70004000 { /* ESDHC1 */
+                               esdhc1: esdhc@70004000 {
                                        compatible = "fsl,imx51-esdhc";
                                        reg = <0x70004000 0x4000>;
                                        interrupts = <1>;
                                        status = "disabled";
                                };
 
-                               esdhc@70008000 { /* ESDHC2 */
+                               esdhc2: esdhc@70008000 {
                                        compatible = "fsl,imx51-esdhc";
                                        reg = <0x70008000 0x4000>;
                                        interrupts = <2>;
@@ -98,7 +98,7 @@ uart3: serial@7000c000 {
                                        status = "disabled";
                                };
 
-                               ecspi@70010000 { /* ECSPI1 */
+                               ecspi1: ecspi@70010000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx51-ecspi";
@@ -116,7 +116,7 @@ ssi2: ssi@70014000 {
                                        status = "disabled";
                                };
 
-                               esdhc@70020000 { /* ESDHC3 */
+                               esdhc3: esdhc@70020000 {
                                        compatible = "fsl,imx51-esdhc";
                                        reg = <0x70020000 0x4000>;
                                        interrupts = <3>;
@@ -124,7 +124,7 @@ esdhc@70020000 { /* ESDHC3 */
                                        status = "disabled";
                                };
 
-                               esdhc@70024000 { /* ESDHC4 */
+                               esdhc4: esdhc@70024000 {
                                        compatible = "fsl,imx51-esdhc";
                                        reg = <0x70024000 0x4000>;
                                        interrupts = <4>;
@@ -133,28 +133,28 @@ esdhc@70024000 { /* ESDHC4 */
                                };
                        };
 
-                       usb@73f80000 {
+                       usbotg: usb@73f80000 {
                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
                                reg = <0x73f80000 0x0200>;
                                interrupts = <18>;
                                status = "disabled";
                        };
 
-                       usb@73f80200 {
+                       usbh1: usb@73f80200 {
                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
                                reg = <0x73f80200 0x0200>;
                                interrupts = <14>;
                                status = "disabled";
                        };
 
-                       usb@73f80400 {
+                       usbh2: usb@73f80400 {
                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
                                reg = <0x73f80400 0x0200>;
                                interrupts = <16>;
                                status = "disabled";
                        };
 
-                       usb@73f80600 {
+                       usbh3: usb@73f80600 {
                                compatible = "fsl,imx51-usb", "fsl,imx27-usb";
                                reg = <0x73f80600 0x0200>;
                                interrupts = <17>;
@@ -201,20 +201,20 @@ gpio4: gpio@73f90000 {
                                #interrupt-cells = <2>;
                        };
 
-                       wdog@73f98000 { /* WDOG1 */
+                       wdog1: wdog@73f98000 {
                                compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
                                reg = <0x73f98000 0x4000>;
                                interrupts = <58>;
                        };
 
-                       wdog@73f9c000 { /* WDOG2 */
+                       wdog2: wdog@73f9c000 {
                                compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
                                reg = <0x73f9c000 0x4000>;
                                interrupts = <59>;
                                status = "disabled";
                        };
 
-                       iomuxc@73fa8000 {
+                       iomuxc: iomuxc@73fa8000 {
                                compatible = "fsl,imx51-iomuxc";
                                reg = <0x73fa8000 0x4000>;
 
@@ -352,7 +352,7 @@ aips@80000000 {     /* AIPS2 */
                        reg = <0x80000000 0x10000000>;
                        ranges;
 
-                       ecspi@83fac000 { /* ECSPI2 */
+                       ecspi2: ecspi@83fac000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx51-ecspi";
@@ -361,14 +361,14 @@ ecspi@83fac000 { /* ECSPI2 */
                                status = "disabled";
                        };
 
-                       sdma@83fb0000 {
+                       sdma: sdma@83fb0000 {
                                compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
                                reg = <0x83fb0000 0x4000>;
                                interrupts = <6>;
                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
                        };
 
-                       cspi@83fc0000 {
+                       cspi: cspi@83fc0000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -377,7 +377,7 @@ cspi@83fc0000 {
                                status = "disabled";
                        };
 
-                       i2c@83fc4000 { /* I2C2 */
+                       i2c2: i2c@83fc4000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -386,7 +386,7 @@ i2c@83fc4000 { /* I2C2 */
                                status = "disabled";
                        };
 
-                       i2c@83fc8000 { /* I2C1 */
+                       i2c1: i2c@83fc8000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -404,13 +404,13 @@ ssi1: ssi@83fcc000 {
                                status = "disabled";
                        };
 
-                       audmux@83fd0000 {
+                       audmux: audmux@83fd0000 {
                                compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
                                reg = <0x83fd0000 0x4000>;
                                status = "disabled";
                        };
 
-                       nand@83fdb000 {
+                       nfc: nand@83fdb000 {
                                compatible = "fsl,imx51-nand";
                                reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
                                interrupts = <8>;
@@ -426,7 +426,7 @@ ssi3: ssi@83fe8000 {
                                status = "disabled";
                        };
 
-                       ethernet@83fec000 {
+                       fec: ethernet@83fec000 {
                                compatible = "fsl,imx51-fec", "fsl,imx27-fec";
                                reg = <0x83fec000 0x4000>;
                                interrupts = <87>;

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 8b33195a5a3381968c2a415763a308ecbb46d405..f45d4b1e21b550d8c311a9b78c6acdbc29152f36 100644 (file)
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -81,7 +81,7 @@ spba@50000000 {
                                reg = <0x50000000 0x40000>;
                                ranges;
 
-                               esdhc@50004000 { /* ESDHC1 */
+                               esdhc1: esdhc@50004000 {
                                        compatible = "fsl,imx53-esdhc";
                                        reg = <0x50004000 0x4000>;
                                        interrupts = <1>;
@@ -89,7 +89,7 @@ esdhc@50004000 { /* ESDHC1 */
                                        status = "disabled";
                                };
 
-                               esdhc@50008000 { /* ESDHC2 */
+                               esdhc2: esdhc@50008000 {
                                        compatible = "fsl,imx53-esdhc";
                                        reg = <0x50008000 0x4000>;
                                        interrupts = <2>;
@@ -104,7 +104,7 @@ uart3: serial@5000c000 {
                                        status = "disabled";
                                };
 
-                               ecspi@50010000 { /* ECSPI1 */
+                               ecspi1: ecspi@50010000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -122,7 +122,7 @@ ssi2: ssi@50014000 {
                                        status = "disabled";
                                };
 
-                               esdhc@50020000 { /* ESDHC3 */
+                               esdhc3: esdhc@50020000 {
                                        compatible = "fsl,imx53-esdhc";
                                        reg = <0x50020000 0x4000>;
                                        interrupts = <3>;
@@ -130,7 +130,7 @@ esdhc@50020000 { /* ESDHC3 */
                                        status = "disabled";
                                };
 
-                               esdhc@50024000 { /* ESDHC4 */
+                               esdhc4: esdhc@50024000 {
                                        compatible = "fsl,imx53-esdhc";
                                        reg = <0x50024000 0x4000>;
                                        interrupts = <4>;
@@ -139,28 +139,28 @@ esdhc@50024000 { /* ESDHC4 */
                                };
                        };
 
-                       usb@53f80000 {
+                       usbotg: usb@53f80000 {
                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
                                reg = <0x53f80000 0x0200>;
                                interrupts = <18>;
                                status = "disabled";
                        };
 
-                       usb@53f80200 {
+                       usbh1: usb@53f80200 {
                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
                                reg = <0x53f80200 0x0200>;
                                interrupts = <14>;
                                status = "disabled";
                        };
 
-                       usb@53f80400 {
+                       usbh2: usb@53f80400 {
                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
                                reg = <0x53f80400 0x0200>;
                                interrupts = <16>;
                                status = "disabled";
                        };
 
-                       usb@53f80600 {
+                       usbh3: usb@53f80600 {
                                compatible = "fsl,imx53-usb", "fsl,imx27-usb";
                                reg = <0x53f80600 0x0200>;
                                interrupts = <17>;
@@ -207,20 +207,20 @@ gpio4: gpio@53f90000 {
                                #interrupt-cells = <2>;
                        };
 
-                       wdog@53f98000 { /* WDOG1 */
+                       wdog1: wdog@53f98000 {
                                compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
                                reg = <0x53f98000 0x4000>;
                                interrupts = <58>;
                        };
 
-                       wdog@53f9c000 { /* WDOG2 */
+                       wdog2: wdog@53f9c000 {
                                compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
                                reg = <0x53f9c000 0x4000>;
                                interrupts = <59>;
                                status = "disabled";
                        };
 
-                       iomuxc@53fa8000 {
+                       iomuxc: iomuxc@53fa8000 {
                                compatible = "fsl,imx53-iomuxc";
                                reg = <0x53fa8000 0x4000>;
 
@@ -479,7 +479,7 @@ gpio7: gpio@53fe4000 {
                                #interrupt-cells = <2>;
                        };
 
-                       i2c@53fec000 { /* I2C3 */
+                       i2c3: i2c@53fec000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -510,7 +510,7 @@ uart5: serial@63f90000 {
                                status = "disabled";
                        };
 
-                       ecspi@63fac000 { /* ECSPI2 */
+                       ecspi2: ecspi@63fac000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
@@ -519,14 +519,14 @@ ecspi@63fac000 { /* ECSPI2 */
                                status = "disabled";
                        };
 
-                       sdma@63fb0000 {
+                       sdma: sdma@63fb0000 {
                                compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
                                reg = <0x63fb0000 0x4000>;
                                interrupts = <6>;
                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
                        };
 
-                       cspi@63fc0000 {
+                       cspi: cspi@63fc0000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
@@ -535,7 +535,7 @@ cspi@63fc0000 {
                                status = "disabled";
                        };
 
-                       i2c@63fc4000 { /* I2C2 */
+                       i2c2: i2c@63fc4000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -544,7 +544,7 @@ i2c@63fc4000 { /* I2C2 */
                                status = "disabled";
                        };
 
-                       i2c@63fc8000 { /* I2C1 */
+                       i2c1: i2c@63fc8000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
@@ -562,13 +562,13 @@ ssi1: ssi@63fcc000 {
                                status = "disabled";
                        };
 
-                       audmux@63fd0000 {
+                       audmux: audmux@63fd0000 {
                                compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
                                reg = <0x63fd0000 0x4000>;
                                status = "disabled";
                        };
 
-                       nand@63fdb000 {
+                       nfc: nand@63fdb000 {
                                compatible = "fsl,imx53-nand";
                                reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
                                interrupts = <8>;
@@ -584,7 +584,7 @@ ssi3: ssi@63fe8000 {
                                status = "disabled";
                        };
 
-                       ethernet@63fec000 {
+                       fec: ethernet@63fec000 {
                                compatible = "fsl,imx53-fec", "fsl,imx25-fec";
                                reg = <0x63fec000 0x4000>;
                                interrupts = <87>;

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 1565aea59ebb93125458385f575d0e4508d931ce..6dfeaedef3077dd8732f659c764f67b7f0cb4a03 100644 (file)
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -108,7 +108,7 @@ dma-apbh@00110000 {
                        clocks = <&clks 106>;
                };
 
-               gpmi-nand@00112000 {
+               nfc: gpmi-nand@00112000 {
                        compatible = "fsl,imx6q-gpmi-nand";
                        #address-cells = <1>;
                        #size-cells = <1>;
@@ -152,12 +152,12 @@ spba-bus@02000000 {
                                reg = <0x02000000 0x40000>;
                                ranges;
 
-                               spdif@02004000 {
+                               spdif: spdif@02004000 {
                                        reg = <0x02004000 0x4000>;
                                        interrupts = <0 52 0x04>;
                                };
 
-                               ecspi@02008000 { /* eCSPI1 */
+                               ecspi1: ecspi@02008000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -168,7 +168,7 @@ ecspi@02008000 { /* eCSPI1 */
                                        status = "disabled";
                                };
 
-                               ecspi@0200c000 { /* eCSPI2 */
+                               ecspi2: ecspi@0200c000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -179,7 +179,7 @@ ecspi@0200c000 { /* eCSPI2 */
                                        status = "disabled";
                                };
 
-                               ecspi@02010000 { /* eCSPI3 */
+                               ecspi3: ecspi@02010000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -190,7 +190,7 @@ ecspi@02010000 { /* eCSPI3 */
                                        status = "disabled";
                                };
 
-                               ecspi@02014000 { /* eCSPI4 */
+                               ecspi4: ecspi@02014000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -201,7 +201,7 @@ ecspi@02014000 { /* eCSPI4 */
                                        status = "disabled";
                                };
 
-                               ecspi@02018000 { /* eCSPI5 */
+                               ecspi5: ecspi@02018000 {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
@@ -221,7 +221,7 @@ uart1: serial@02020000 {
                                        status = "disabled";
                                };
 
-                               esai@02024000 {
+                               esai: esai@02024000 {
                                        reg = <0x02024000 0x4000>;
                                        interrupts = <0 51 0x04>;
                                };
@@ -256,7 +256,7 @@ ssi3: ssi@02030000 {
                                        status = "disabled";
                                };
 
-                               asrc@02034000 {
+                               asrc: asrc@02034000 {
                                        reg = <0x02034000 0x4000>;
                                        interrupts = <0 50 0x04>;
                                };
@@ -266,7 +266,7 @@ spba@0203c000 {
                                };
                        };
 
-                       vpu@02040000 {
+                       vpu: vpu@02040000 {
                                reg = <0x02040000 0x3c000>;
                                interrupts = <0 3 0x04 0 12 0x04>;
                        };
@@ -275,37 +275,37 @@ aipstz@0207c000 { /* AIPSTZ1 */
                                reg = <0x0207c000 0x4000>;
                        };
 
-                       pwm@02080000 { /* PWM1 */
+                       pwm1: pwm@02080000 {
                                reg = <0x02080000 0x4000>;
                                interrupts = <0 83 0x04>;
                        };
 
-                       pwm@02084000 { /* PWM2 */
+                       pwm2: pwm@02084000 {
                                reg = <0x02084000 0x4000>;
                                interrupts = <0 84 0x04>;
                        };
 
-                       pwm@02088000 { /* PWM3 */
+                       pwm3: pwm@02088000 {
                                reg = <0x02088000 0x4000>;
                                interrupts = <0 85 0x04>;
                        };
 
-                       pwm@0208c000 { /* PWM4 */
+                       pwm4: pwm@0208c000 {
                                reg = <0x0208c000 0x4000>;
                                interrupts = <0 86 0x04>;
                        };
 
-                       flexcan@02090000 { /* CAN1 */
+                       can1: flexcan@02090000 {
                                reg = <0x02090000 0x4000>;
                                interrupts = <0 110 0x04>;
                        };
 
-                       flexcan@02094000 { /* CAN2 */
+                       can2: flexcan@02094000 {
                                reg = <0x02094000 0x4000>;
                                interrupts = <0 111 0x04>;
                        };
 
-                       gpt@02098000 {
+                       gpt: gpt@02098000 {
                                compatible = "fsl,imx6q-gpt";
                                reg = <0x02098000 0x4000>;
                                interrupts = <0 55 0x04>;
@@ -381,19 +381,19 @@ gpio7: gpio@020b4000 {
                                #interrupt-cells = <2>;
                        };
 
-                       kpp@020b8000 {
+                       kpp: kpp@020b8000 {
                                reg = <0x020b8000 0x4000>;
                                interrupts = <0 82 0x04>;
                        };
 
-                       wdog@020bc000 { /* WDOG1 */
+                       wdog1: wdog@020bc000 {
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020bc000 0x4000>;
                                interrupts = <0 80 0x04>;
                                clocks = <&clks 0>;
                        };
 
-                       wdog@020c0000 { /* WDOG2 */
+                       wdog2: wdog@020c0000 {
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020c0000 0x4000>;
                                interrupts = <0 81 0x04>;
@@ -525,23 +525,23 @@ snvs-rtc-lp@34 {
                                };
                        };
 
-                       epit@020d0000 { /* EPIT1 */
+                       epit1: epit@020d0000 { /* EPIT1 */
                                reg = <0x020d0000 0x4000>;
                                interrupts = <0 56 0x04>;
                        };
 
-                       epit@020d4000 { /* EPIT2 */
+                       epit2: epit@020d4000 { /* EPIT2 */
                                reg = <0x020d4000 0x4000>;
                                interrupts = <0 57 0x04>;
                        };
 
-                       src@020d8000 {
+                       src: src@020d8000 {
                                compatible = "fsl,imx6q-src";
                                reg = <0x020d8000 0x4000>;
                                interrupts = <0 91 0x04 0 96 0x04>;
                        };
 
-                       gpc@020dc000 {
+                       gpc: gpc@020dc000 {
                                compatible = "fsl,imx6q-gpc";
                                reg = <0x020dc000 0x4000>;
                                interrupts = <0 89 0x04 0 90 0x04>;
@@ -552,7 +552,7 @@ gpr: iomuxc-gpr@020e0000 {
                                reg = <0x020e0000 0x38>;
                        };
 
-                       iomuxc@020e0000 {
+                       iomuxc: iomuxc@020e0000 {
                                compatible = "fsl,imx6q-iomuxc";
                                reg = <0x020e0000 0x4000>;
 
@@ -764,17 +764,17 @@ pinctrl_usdhc4_2: usdhc4grp-2 {
                                };
                        };
 
-                       dcic@020e4000 { /* DCIC1 */
+                       dcic1: dcic@020e4000 {
                                reg = <0x020e4000 0x4000>;
                                interrupts = <0 124 0x04>;
                        };
 
-                       dcic@020e8000 { /* DCIC2 */
+                       dcic2: dcic@020e8000 {
                                reg = <0x020e8000 0x4000>;
                                interrupts = <0 125 0x04>;
                        };
 
-                       sdma@020ec000 {
+                       sdma: sdma@020ec000 {
                                compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
                                reg = <0x020ec000 0x4000>;
                                interrupts = <0 2 0x04>;
@@ -800,7 +800,7 @@ aipstz@0217c000 { /* AIPSTZ2 */
                                reg = <0x0217c000 0x4000>;
                        };
 
-                       usb@02184000 { /* USB OTG */
+                       usbotg: usb@02184000 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184000 0x200>;
                                interrupts = <0 43 0x04>;
@@ -810,7 +810,7 @@ usb@02184000 { /* USB OTG */
                                status = "disabled";
                        };
 
-                       usb@02184200 { /* USB1 */
+                       usbh1: usb@02184200 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184200 0x200>;
                                interrupts = <0 40 0x04>;
@@ -820,7 +820,7 @@ usb@02184200 { /* USB1 */
                                status = "disabled";
                        };
 
-                       usb@02184400 { /* USB2 */
+                       usbh2: usb@02184400 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184400 0x200>;
                                interrupts = <0 41 0x04>;
@@ -829,7 +829,7 @@ usb@02184400 { /* USB2 */
                                status = "disabled";
                        };
 
-                       usb@02184600 { /* USB3 */
+                       usbh3: usb@02184600 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184600 0x200>;
                                interrupts = <0 42 0x04>;
@@ -838,14 +838,14 @@ usb@02184600 { /* USB3 */
                                status = "disabled";
                        };
 
-                       usbmisc: usbmisc@02184800 {
+                       usbmisc: usbmisc: usbmisc@02184800 {
                                #index-cells = <1>;
                                compatible = "fsl,imx6q-usbmisc";
                                reg = <0x02184800 0x200>;
                                clocks = <&clks 162>;
                        };
 
-                       ethernet@02188000 {
+                       fec: ethernet@02188000 {
                                compatible = "fsl,imx6q-fec";
                                reg = <0x02188000 0x4000>;
                                interrupts = <0 118 0x04 0 119 0x04>;
@@ -859,7 +859,7 @@ mlb@0218c000 {
                                interrupts = <0 53 0x04 0 117 0x04 0 126 0x04>;
                        };
 
-                       usdhc@02190000 { /* uSDHC1 */
+                       usdhc1: usdhc@02190000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02190000 0x4000>;
                                interrupts = <0 22 0x04>;
@@ -869,7 +869,7 @@ usdhc@02190000 { /* uSDHC1 */
                                status = "disabled";
                        };
 
-                       usdhc@02194000 { /* uSDHC2 */
+                       usdhc2: usdhc@02194000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02194000 0x4000>;
                                interrupts = <0 23 0x04>;
@@ -879,7 +879,7 @@ usdhc@02194000 { /* uSDHC2 */
                                status = "disabled";
                        };
 
-                       usdhc@02198000 { /* uSDHC3 */
+                       usdhc3: usdhc@02198000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02198000 0x4000>;
                                interrupts = <0 24 0x04>;
@@ -889,7 +889,7 @@ usdhc@02198000 { /* uSDHC3 */
                                status = "disabled";
                        };
 
-                       usdhc@0219c000 { /* uSDHC4 */
+                       usdhc4: usdhc@0219c000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x0219c000 0x4000>;
                                interrupts = <0 25 0x04>;
@@ -899,7 +899,7 @@ usdhc@0219c000 { /* uSDHC4 */
                                status = "disabled";
                        };
 
-                       i2c@021a0000 { /* I2C1 */
+                       i2c1: i2c@021a0000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -909,7 +909,7 @@ i2c@021a0000 { /* I2C1 */
                                status = "disabled";
                        };
 
-                       i2c@021a4000 { /* I2C2 */
+                       i2c2: i2c@021a4000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -919,7 +919,7 @@ i2c@021a4000 { /* I2C2 */
                                status = "disabled";
                        };
 
-                       i2c@021a8000 { /* I2C3 */
+                       i2c3: i2c@021a8000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
@@ -933,12 +933,12 @@ romcp@021ac000 {
                                reg = <0x021ac000 0x4000>;
                        };
 
-                       mmdc@021b0000 { /* MMDC0 */
+                       mmdc0: mmdc@021b0000 { /* MMDC0 */
                                compatible = "fsl,imx6q-mmdc";
                                reg = <0x021b0000 0x4000>;
                        };
 
-                       mmdc@021b4000 { /* MMDC1 */
+                       mmdc1: mmdc@021b4000 { /* MMDC1 */
                                reg = <0x021b4000 0x4000>;
                        };
 
@@ -966,7 +966,7 @@ tzasc@021d4000 { /* TZASC2 */
                                interrupts = <0 109 0x04>;
                        };
 
-                       audmux@021d8000 {
+                       audmux: audmux@021d8000 {
                                compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
                                reg = <0x021d8000 0x4000>;
                                status = "disabled";