ARM: dts: imx6sx-sdb: Convert from fbdev to drm bindings

It is preferred to use the panel compatible string rather than passing
the LCD timing in the device tree.

So pass the "sii,43wvf1g" compatible string, which describes the parallel
LCD.

Also pass the 'backlight' property as described in
Documentation/devicetree/bindings/display/panel/simple-panel.txt

Signed-off-by: Marco Franchi <marcofrk@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index d57a41c9c4b399882642804eb2bfa901b315ff39..d35aa858f9dbd48b25abb3a7e73f6a91c2c38d80 100644 (file)
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -24,7 +24,7 @@ memory {
                reg = <0x80000000 0x40000000>;
        };
 
-       backlight {
+       backlight_display: backlight-display {
                compatible = "pwm-backlight";
                pwms = <&pwm3 0 5000000>;
                brightness-levels = <0 4 8 16 32 64 128 255>;
@@ -129,6 +129,13 @@ reg_pcie_gpio: regulator-pcie-gpio {
                enable-active-high;
        };
 
+       reg_lcd_5v: regulator-lcd-5v {
+               compatible = "regulator-fixed";
+               regulator-name = "lcd-5v0";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+       };
+
        sound {
                compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962";
                model = "wm8962-audio";
@@ -144,6 +151,19 @@ sound {
                mux-int-port = <2>;
                mux-ext-port = <6>;
        };
+
+       panel {
+               compatible = "sii,43wvf1g";
+               backlight = <&backlight_display>;
+               dvdd-supply = <&reg_lcd_3v3>;
+               avdd-supply = <&reg_lcd_5v>;
+
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&display_out>;
+                       };
+               };
+       };
 };
 
 &audmux {
@@ -221,31 +241,11 @@ &pcie {
 &lcdif1 {
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_lcd>;
-       lcd-supply = <&reg_lcd_3v3>;
-       display = <&display0>;
        status = "okay";
 
-       display0: display0 {
-               bits-per-pixel = <16>;
-               bus-width = <24>;
-
-               display-timings {
-                       native-mode = <&timing0>;
-                       timing0: timing0 {
-                               clock-frequency = <33500000>;
-                               hactive = <800>;
-                               vactive = <480>;
-                               hback-porch = <89>;
-                               hfront-porch = <164>;
-                               vback-porch = <23>;
-                               vfront-porch = <10>;
-                               hsync-len = <10>;
-                               vsync-len = <10>;
-                               hsync-active = <0>;
-                               vsync-active = <0>;
-                               de-active = <1>;
-                               pixelclk-active = <0>;
-                       };
+       port {
+               display_out: endpoint {
+                       remote-endpoint = <&panel_in>;
                };
        };
 };