ARM: dts: r8a7790: Use R-Car Gen 2 fallback binding for i2c nodes

Use recently added R-Car Gen 2 fallback binding for i2c nodes in
DT for r8a7790 SoC.

This has no run-time effect for the current driver as the initialisation
sequence is the same for the SoC-specific binding for r8a7790 and the
fallback binding for R-Car Gen 2.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>

diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index b7ed7466308b1e5c7af6bcf297897696ea890908..823ab536175d51143067f6d9e15036f227afebb1 100644 (file)
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -480,7 +480,7 @@ usb_dmac1: dma-controller@e65b0000 {
        i2c0: i2c@e6508000 {
                #address-cells = <1>;
                #size-cells = <0>;
-               compatible = "renesas,i2c-r8a7790";
+               compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
                reg = <0 0xe6508000 0 0x40>;
                interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C0>;
@@ -492,7 +492,7 @@ i2c0: i2c@e6508000 {
        i2c1: i2c@e6518000 {
                #address-cells = <1>;
                #size-cells = <0>;
-               compatible = "renesas,i2c-r8a7790";
+               compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
                reg = <0 0xe6518000 0 0x40>;
                interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C1>;
@@ -504,7 +504,7 @@ i2c1: i2c@e6518000 {
        i2c2: i2c@e6530000 {
                #address-cells = <1>;
                #size-cells = <0>;
-               compatible = "renesas,i2c-r8a7790";
+               compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
                reg = <0 0xe6530000 0 0x40>;
                interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C2>;
@@ -516,7 +516,7 @@ i2c2: i2c@e6530000 {
        i2c3: i2c@e6540000 {
                #address-cells = <1>;
                #size-cells = <0>;
-               compatible = "renesas,i2c-r8a7790";
+               compatible = "renesas,i2c-r8a7790", "renesas,rcar-gen2-i2c";
                reg = <0 0xe6540000 0 0x40>;
                interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>;
                clocks = <&mstp9_clks R8A7790_CLK_I2C3>;