LPFC_ATTR_R(suppress_link_up, LPFC_INITIALIZE_LINK, LPFC_INITIALIZE_LINK,
LPFC_DELAY_INIT_LINK_INDEFINITELY,
"Suppress Link Up at initialization");
+
+static ssize_t
+lpfc_pls_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ phba->sli4_hba.pc_sli4_params.pls);
+}
+static DEVICE_ATTR(pls, 0444,
+ lpfc_pls_show, NULL);
+
+static ssize_t
+lpfc_pt_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ return scnprintf(buf, PAGE_SIZE, "%d\n",
+ (phba->hba_flag & HBA_PERSISTENT_TOPO) ? 1 : 0);
+}
+static DEVICE_ATTR(pt, 0444,
+ lpfc_pt_show, NULL);
+
/*
# lpfc_cnt: Number of IOCBs allocated for ELS, CT, and ABTS
# 1 - (1024)
val);
return -EINVAL;
}
- if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
+ /*
+ * The 'topology' is not a configurable parameter if :
+ * - persistent topology enabled
+ * - G7 adapters
+ * - G6 with no private loop support
+ */
+
+ if (((phba->hba_flag & HBA_PERSISTENT_TOPO) ||
+ (!phba->sli4_hba.pc_sli4_params.pls &&
+ phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC) ||
phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
val == 4) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
&dev_attr_lpfc_req_fw_upgrade,
&dev_attr_lpfc_suppress_link_up,
&dev_attr_iocb_hw,
+ &dev_attr_pls,
+ &dev_attr_pt,
&dev_attr_txq_hw,
&dev_attr_txcmplq_hw,
&dev_attr_lpfc_fips_level,
#define lpfc_mbx_rd_conf_trunk_SHIFT 12
#define lpfc_mbx_rd_conf_trunk_MASK 0x0000000F
#define lpfc_mbx_rd_conf_trunk_WORD word2
+#define lpfc_mbx_rd_conf_pt_SHIFT 20
+#define lpfc_mbx_rd_conf_pt_MASK 0x00000003
+#define lpfc_mbx_rd_conf_pt_WORD word2
+#define lpfc_mbx_rd_conf_tf_SHIFT 22
+#define lpfc_mbx_rd_conf_tf_MASK 0x00000001
+#define lpfc_mbx_rd_conf_tf_WORD word2
+#define lpfc_mbx_rd_conf_ptv_SHIFT 23
+#define lpfc_mbx_rd_conf_ptv_MASK 0x00000001
+#define lpfc_mbx_rd_conf_ptv_WORD word2
#define lpfc_mbx_rd_conf_topology_SHIFT 24
#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
#define lpfc_mbx_rd_conf_topology_WORD word2
#define cfg_bv1s_SHIFT 10
#define cfg_bv1s_MASK 0x00000001
#define cfg_bv1s_WORD word19
+#define cfg_pvl_SHIFT 13
+#define cfg_pvl_MASK 0x00000001
+#define cfg_pvl_WORD word19
#define cfg_nsler_SHIFT 12
#define cfg_nsler_MASK 0x00000001
memset(&phba->sli4_hba.bmbx, 0, sizeof(struct lpfc_bmbx));
}
+static const char * const lpfc_topo_to_str[] = {
+ "Loop then P2P",
+ "Loopback",
+ "P2P Only",
+ "Unsupported",
+ "Loop Only",
+ "Unsupported",
+ "P2P then Loop",
+};
+
+/**
+ * lpfc_map_topology - Map the topology read from READ_CONFIG
+ * @phba: pointer to lpfc hba data structure.
+ * @rdconf: pointer to read config data
+ *
+ * This routine is invoked to map the topology values as read
+ * from the read config mailbox command. If the persistent
+ * topology feature is supported, the firmware will provide the
+ * saved topology information to be used in INIT_LINK
+ *
+ **/
+#define LINK_FLAGS_DEF 0x0
+#define LINK_FLAGS_P2P 0x1
+#define LINK_FLAGS_LOOP 0x2
+static void
+lpfc_map_topology(struct lpfc_hba *phba, struct lpfc_mbx_read_config *rd_config)
+{
+ u8 ptv, tf, pt;
+
+ ptv = bf_get(lpfc_mbx_rd_conf_ptv, rd_config);
+ tf = bf_get(lpfc_mbx_rd_conf_tf, rd_config);
+ pt = bf_get(lpfc_mbx_rd_conf_pt, rd_config);
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2027 Read Config Data : ptv:0x%x, tf:0x%x pt:0x%x",
+ ptv, tf, pt);
+ if (!ptv) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2019 FW does not support persistent topology "
+ "Using driver parameter defined value [%s]",
+ lpfc_topo_to_str[phba->cfg_topology]);
+ return;
+ }
+ /* FW supports persistent topology - override module parameter value */
+ phba->hba_flag |= HBA_PERSISTENT_TOPO;
+ switch (phba->pcidev->device) {
+ case PCI_DEVICE_ID_LANCER_G7_FC:
+ if (tf || (pt == LINK_FLAGS_LOOP)) {
+ /* Invalid values from FW - use driver params */
+ phba->hba_flag &= ~HBA_PERSISTENT_TOPO;
+ } else {
+ /* Prism only supports PT2PT topology */
+ phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT;
+ }
+ break;
+ case PCI_DEVICE_ID_LANCER_G6_FC:
+ if (!tf) {
+ phba->cfg_topology = ((pt == LINK_FLAGS_LOOP)
+ ? FLAGS_TOPOLOGY_MODE_LOOP
+ : FLAGS_TOPOLOGY_MODE_PT_PT);
+ } else {
+ phba->hba_flag &= ~HBA_PERSISTENT_TOPO;
+ }
+ break;
+ default: /* G5 */
+ if (tf) {
+ /* If topology failover set - pt is '0' or '1' */
+ phba->cfg_topology = (pt ? FLAGS_TOPOLOGY_MODE_PT_LOOP :
+ FLAGS_TOPOLOGY_MODE_LOOP_PT);
+ } else {
+ phba->cfg_topology = ((pt == LINK_FLAGS_P2P)
+ ? FLAGS_TOPOLOGY_MODE_PT_PT
+ : FLAGS_TOPOLOGY_MODE_LOOP);
+ }
+ break;
+ }
+ if (phba->hba_flag & HBA_PERSISTENT_TOPO) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "2020 Using persistent topology value [%s]",
+ lpfc_topo_to_str[phba->cfg_topology]);
+ } else {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "2021 Invalid topology values from FW "
+ "Using driver parameter defined value [%s]",
+ lpfc_topo_to_str[phba->cfg_topology]);
+ }
+}
+
/**
* lpfc_sli4_read_config - Get the config parameters.
* @phba: pointer to lpfc hba data structure.
phba->max_vpi = (phba->sli4_hba.max_cfg_param.max_vpi > 0) ?
(phba->sli4_hba.max_cfg_param.max_vpi - 1) : 0;
phba->max_vports = phba->max_vpi;
+ lpfc_map_topology(phba, rd_config);
lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
"2003 cfg params Extents? %d "
"XRI(B:%d M:%d), "
sli4_params->cqav = bf_get(cfg_cqav, mbx_sli4_parameters);
sli4_params->wqsize = bf_get(cfg_wqsize, mbx_sli4_parameters);
sli4_params->bv1s = bf_get(cfg_bv1s, mbx_sli4_parameters);
+ sli4_params->pls = bf_get(cfg_pvl, mbx_sli4_parameters);
sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
mbx_sli4_parameters);
sli4_params->wqpcnt = bf_get(cfg_wqpcnt, mbx_sli4_parameters);
projects / linux.git / commitdiff