]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
ARM: dts: koelsch: add HDMI input
authorHans Verkuil <hverkuil@xs4all.nl>
Tue, 18 Oct 2016 15:01:34 +0000 (17:01 +0200)
committerSimon Horman <horms+renesas@verge.net.au>
Fri, 4 Nov 2016 09:36:29 +0000 (10:36 +0100)
Add support in the dts for the HDMI input. Based on the Lager dts
patch from Ulrich Hecht.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
[uli: removed "renesas," prefixes from pfc nodes]
Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
arch/arm/boot/dts/r8a7791-koelsch.dts

index f17bfa000f7383207f037ac7343808a356c6d92b..c457b43deb7d8ebccb145faa5a06e0a5eb81fd69 100644 (file)
@@ -265,12 +265,23 @@ sndcodec: simple-audio-card,codec {
                };
        };
 
+       hdmi-in {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_con_in: endpoint {
+                               remote-endpoint = <&adv7612_in>;
+                       };
+               };
+       };
+
        hdmi-out {
                compatible = "hdmi-connector";
                type = "a";
 
                port {
-                       hdmi_con: endpoint {
+                       hdmi_con_out: endpoint {
                                remote-endpoint = <&adv7511_out>;
                        };
                };
@@ -414,6 +425,11 @@ usb1_pins: usb1 {
                function = "usb1";
        };
 
+       vin0_pins: vin0 {
+               groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
+               function = "vin0";
+       };
+
        vin1_pins: vin1 {
                groups = "vin1_data8", "vin1_clk";
                function = "vin1";
@@ -617,7 +633,34 @@ adv7511_in: endpoint {
                        port@1 {
                                reg = <1>;
                                adv7511_out: endpoint {
-                                       remote-endpoint = <&hdmi_con>;
+                                       remote-endpoint = <&hdmi_con_out>;
+                               };
+                       };
+               };
+       };
+
+       hdmi-in@4c {
+               compatible = "adi,adv7612";
+               reg = <0x4c>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+               default-input = <0>;
+
+               ports {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       port@0 {
+                               reg = <0>;
+                               adv7612_in: endpoint {
+                                       remote-endpoint = <&hdmi_con_in>;
+                               };
+                       };
+
+                       port@2 {
+                               reg = <2>;
+                               adv7612_out: endpoint {
+                                       remote-endpoint = <&vin0ep2>;
                                };
                        };
                };
@@ -699,6 +742,27 @@ &cpu0 {
        cpu0-supply = <&vdd_dvfs>;
 };
 
+/* HDMI video input */
+&vin0 {
+       status = "okay";
+       pinctrl-0 = <&vin0_pins>;
+       pinctrl-names = "default";
+
+       port {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               vin0ep2: endpoint {
+                       remote-endpoint = <&adv7612_out>;
+                       bus-width = <24>;
+                       hsync-active = <0>;
+                       vsync-active = <0>;
+                       pclk-sample = <1>;
+                       data-active = <1>;
+               };
+       };
+};
+
 /* composite video input */
 &vin1 {
        status = "okay";