arm: spear6xx: add labels to various nodes in spear600.dtsi

Having labels allows to more easily reference nodes in .dts files
including spear600.dtsi.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>

diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi
index 9f60a7b6a42bf42e0b84584d94b48b7888ea58a0..8459286def2623197dff09e6725e72b8d246d458 100644 (file)
--- a/arch/arm/boot/dts/spear600.dtsi
+++ b/arch/arm/boot/dts/spear600.dtsi
@@ -49,7 +49,7 @@ vic1: interrupt-controller@f1000000 {
                        #interrupt-cells = <1>;
                };
 
-               clcd@fc200000 {
+               clcd: clcd@fc200000 {
                        compatible = "arm,pl110", "arm,primecell";
                        reg = <0xfc200000 0x1000>;
                        interrupt-parent = <&vic1>;
@@ -57,7 +57,7 @@ clcd@fc200000 {
                        status = "disabled";
                };
 
-               dma@fc400000 {
+               dmac: dma@fc400000 {
                        compatible = "arm,pl080", "arm,primecell";
                        reg = <0xfc400000 0x1000>;
                        interrupt-parent = <&vic1>;
@@ -97,7 +97,7 @@ smi: flash@fc000000 {
                        status = "disabled";
                };
 
-               ehci@e1800000 {
+               ehci_usb0: ehci@e1800000 {
                        compatible = "st,spear600-ehci", "usb-ehci";
                        reg = <0xe1800000 0x1000>;
                        interrupt-parent = <&vic1>;
@@ -105,7 +105,7 @@ ehci@e1800000 {
                        status = "disabled";
                };
 
-               ehci@e2000000 {
+               ehci_usb1: ehci@e2000000 {
                        compatible = "st,spear600-ehci", "usb-ehci";
                        reg = <0xe2000000 0x1000>;
                        interrupt-parent = <&vic1>;
@@ -113,7 +113,7 @@ ehci@e2000000 {
                        status = "disabled";
                };
 
-               ohci@e1900000 {
+               ohci_usb0: ohci@e1900000 {
                        compatible = "st,spear600-ohci", "usb-ohci";
                        reg = <0xe1900000 0x1000>;
                        interrupt-parent = <&vic1>;
@@ -121,7 +121,7 @@ ohci@e1900000 {
                        status = "disabled";
                };
 
-               ohci@e2100000 {
+               ohci_usb1: ohci@e2100000 {
                        compatible = "st,spear600-ohci", "usb-ohci";
                        reg = <0xe2100000 0x1000>;
                        interrupt-parent = <&vic1>;
@@ -135,7 +135,7 @@ apb {
                        compatible = "simple-bus";
                        ranges = <0xd0000000 0xd0000000 0x30000000>;
 
-                       serial@d0000000 {
+                       uart0: serial@d0000000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0xd0000000 0x1000>;
                                interrupt-parent = <&vic0>;
@@ -143,7 +143,7 @@ serial@d0000000 {
                                status = "disabled";
                        };
 
-                       serial@d0080000 {
+                       uart1: serial@d0080000 {
                                compatible = "arm,pl011", "arm,primecell";
                                reg = <0xd0080000 0x1000>;
                                interrupt-parent = <&vic0>;
@@ -181,7 +181,7 @@ gpio2: gpio@d8100000 {
                                interrupts = <4>;
                        };
 
-                       i2c@d0200000 {
+                       i2c: i2c@d0200000 {
                                #address-cells = <1>;
                                #size-cells = <0>;
                                compatible = "snps,designware-i2c";
@@ -191,7 +191,7 @@ i2c@d0200000 {
                                status = "disabled";
                        };
 
-                       rtc@fc900000 {
+                       rtc: rtc@fc900000 {
                                compatible = "st,spear600-rtc";
                                reg = <0xfc900000 0x1000>;
                                interrupts = <10>;