ARM: dts: imx6qdl: use DT macro for clock ID

Switch to use DT macro for clock ID, so that device tree source is more
readable.

Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi
index 0a9c49d69d418c4ea46320e33f055b94d4ec2c54..b453e0e28aeec5d537e4b4da0f664f36d946bb70 100644 (file)
--- a/arch/arm/boot/dts/imx6dl.dtsi
+++ b/arch/arm/boot/dts/imx6dl.dtsi
@@ -35,8 +35,11 @@ cpu@0 {
                                396000  1175000
                        >;
                        clock-latency = <61036>; /* two CLK32 periods */
-                       clocks = <&clks 104>, <&clks 6>, <&clks 16>,
-                                <&clks 17>, <&clks 170>;
+                       clocks = <&clks IMX6QDL_CLK_ARM>,
+                                <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+                                <&clks IMX6QDL_CLK_STEP>,
+                                <&clks IMX6QDL_CLK_PLL1_SW>,
+                                <&clks IMX6QDL_CLK_PLL1_SYS>;
                        clock-names = "arm", "pll2_pfd2_396m", "step",
                                      "pll1_sw", "pll1_sys";
                        arm-supply = <&reg_arm>;
@@ -56,7 +59,7 @@ soc {
                ocram: sram@00900000 {
                        compatible = "mmio-sram";
                        reg = <0x00900000 0x20000>;
-                       clocks = <&clks 142>;
+                       clocks = <&clks IMX6QDL_CLK_OCRAM>;
                };
 
                aips1: aips-bus@02000000 {
@@ -87,7 +90,7 @@ i2c4: i2c@021f8000 {
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021f8000 0x4000>;
                                interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 116>;
+                               clocks = <&clks IMX6DL_CLK_I2C4>;
                                status = "disabled";
                        };
                };
@@ -104,9 +107,9 @@ &hdmi {
 };
 
 &ldb {
-       clocks = <&clks 33>, <&clks 34>,
-                <&clks 39>, <&clks 40>,
-                <&clks 135>, <&clks 136>;
+       clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+                <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+                <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
        clock-names = "di0_pll", "di1_pll",
                      "di0_sel", "di1_sel",
                      "di0", "di1";

diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index fb6185fc9379b1a870ad02738c6e7b32456e4833..e9f3646d1760618cb04027329754c53194068a8c 100644 (file)
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -43,8 +43,11 @@ cpu@0 {
                                396000  1175000
                        >;
                        clock-latency = <61036>; /* two CLK32 periods */
-                       clocks = <&clks 104>, <&clks 6>, <&clks 16>,
-                                <&clks 17>, <&clks 170>;
+                       clocks = <&clks IMX6QDL_CLK_ARM>,
+                                <&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
+                                <&clks IMX6QDL_CLK_STEP>,
+                                <&clks IMX6QDL_CLK_PLL1_SW>,
+                                <&clks IMX6QDL_CLK_PLL1_SYS>;
                        clock-names = "arm", "pll2_pfd2_396m", "step",
                                      "pll1_sw", "pll1_sys";
                        arm-supply = <&reg_arm>;
@@ -78,7 +81,7 @@ soc {
                ocram: sram@00900000 {
                        compatible = "mmio-sram";
                        reg = <0x00900000 0x40000>;
-                       clocks = <&clks 142>;
+                       clocks = <&clks IMX6QDL_CLK_OCRAM>;
                };
 
                aips-bus@02000000 { /* AIPS1 */
@@ -89,7 +92,8 @@ ecspi5: ecspi@02018000 {
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02018000 0x4000>;
                                        interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 116>, <&clks 116>;
+                                       clocks = <&clks IMX6Q_CLK_ECSPI5>,
+                                                <&clks IMX6Q_CLK_ECSPI5>;
                                        clock-names = "ipg", "per";
                                        status = "disabled";
                                };
@@ -140,7 +144,9 @@ sata: sata@02200000 {
                        compatible = "fsl,imx6q-ahci";
                        reg = <0x02200000 0x4000>;
                        interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks =  <&clks 154>, <&clks 187>, <&clks 105>;
+                       clocks = <&clks IMX6QDL_CLK_SATA>,
+                                <&clks IMX6QDL_CLK_SATA_REF_100M>,
+                                <&clks IMX6QDL_CLK_AHB>;
                        clock-names = "sata", "sata_ref", "ahb";
                        status = "disabled";
                };
@@ -152,7 +158,9 @@ ipu2: ipu@02800000 {
                        reg = <0x02800000 0x400000>;
                        interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
                                     <0 7 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clks 133>, <&clks 134>, <&clks 137>;
+                       clocks = <&clks IMX6QDL_CLK_IPU2>,
+                                <&clks IMX6QDL_CLK_IPU2_DI0>,
+                                <&clks IMX6QDL_CLK_IPU2_DI1>;
                        clock-names = "bus", "di0", "di1";
                        resets = <&src 4>;
 
@@ -238,9 +246,10 @@ hdmi_mux_3: endpoint {
 };
 
 &ldb {
-       clocks = <&clks 33>, <&clks 34>,
-                <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>,
-                <&clks 135>, <&clks 136>;
+       clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
+                <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
+                <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
+                <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
        clock-names = "di0_pll", "di1_pll",
                      "di0_sel", "di1_sel", "di2_sel", "di3_sel",
                      "di0", "di1";

diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index b71be4b2b7f3ead3ab6428c5f4327a15cfb947ce..1fd272b52df15e9abe02a2ba249e81a1ff358505 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -10,6 +10,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
+#include <dt-bindings/clock/imx6qdl-clock.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 
 #include "skeleton.dtsi"
@@ -94,7 +95,7 @@ dma_apbh: dma-apbh@00110000 {
                        interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
                        #dma-cells = <1>;
                        dma-channels = <4>;
-                       clocks = <&clks 106>;
+                       clocks = <&clks IMX6QDL_CLK_APBH_DMA>;
                };
 
                gpmi: gpmi-nand@00112000 {
@@ -105,8 +106,11 @@ gpmi: gpmi-nand@00112000 {
                        reg-names = "gpmi-nand", "bch";
                        interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>;
                        interrupt-names = "bch";
-                       clocks = <&clks 152>, <&clks 153>, <&clks 151>,
-                                <&clks 150>, <&clks 149>;
+                       clocks = <&clks IMX6QDL_CLK_GPMI_IO>,
+                                <&clks IMX6QDL_CLK_GPMI_APB>,
+                                <&clks IMX6QDL_CLK_GPMI_BCH>,
+                                <&clks IMX6QDL_CLK_GPMI_BCH_APB>,
+                                <&clks IMX6QDL_CLK_PER1_BCH>;
                        clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch",
                                      "gpmi_bch_apb", "per1_bch";
                        dmas = <&dma_apbh 0>;
@@ -118,7 +122,7 @@ timer@00a00600 {
                        compatible = "arm,cortex-a9-twd-timer";
                        reg = <0x00a00600 0x20>;
                        interrupts = <1 13 0xf01>;
-                       clocks = <&clks 15>;
+                       clocks = <&clks IMX6QDL_CLK_TWD>;
                };
 
                L2: l2-cache@00a02000 {
@@ -149,7 +153,9 @@ pcie: pcie@0x01000000 {
                                        <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>,
                                        <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
                                        <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clks 144>, <&clks 206>, <&clks 189>;
+                       clocks = <&clks IMX6QDL_CLK_PCIE_AXI>,
+                                <&clks IMX6QDL_CLK_LVDS1_GATE>,
+                                <&clks IMX6QDL_CLK_PCIE_REF_125M>;
                        clock-names = "pcie", "pcie_bus", "pcie_phy";
                        status = "disabled";
                };
@@ -180,11 +186,11 @@ spdif: spdif@02004000 {
                                        dmas = <&sdma 14 18 0>,
                                               <&sdma 15 18 0>;
                                        dma-names = "rx", "tx";
-                                       clocks = <&clks 197>, <&clks 3>,
-                                                <&clks 197>, <&clks 0>,
-                                                <&clks 0>,   <&clks 0>,
-                                                <&clks 0>,  <&clks 0>,
-                                                <&clks 0>;
+                                       clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>,
+                                                <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>,
+                                                <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
+                                                <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>,
+                                                <&clks IMX6QDL_CLK_DUMMY>;
                                        clock-names = "core",  "rxtx0",
                                                      "rxtx1", "rxtx2",
                                                      "rxtx3", "rxtx4",
@@ -199,7 +205,8 @@ ecspi1: ecspi@02008000 {
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02008000 0x4000>;
                                        interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 112>, <&clks 112>;
+                                       clocks = <&clks IMX6QDL_CLK_ECSPI1>,
+                                                <&clks IMX6QDL_CLK_ECSPI1>;
                                        clock-names = "ipg", "per";
                                        dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
                                        dma-names = "rx", "tx";
@@ -212,7 +219,8 @@ ecspi2: ecspi@0200c000 {
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x0200c000 0x4000>;
                                        interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 113>, <&clks 113>;
+                                       clocks = <&clks IMX6QDL_CLK_ECSPI2>,
+                                                <&clks IMX6QDL_CLK_ECSPI2>;
                                        clock-names = "ipg", "per";
                                        dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
                                        dma-names = "rx", "tx";
@@ -225,7 +233,8 @@ ecspi3: ecspi@02010000 {
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02010000 0x4000>;
                                        interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 114>, <&clks 114>;
+                                       clocks = <&clks IMX6QDL_CLK_ECSPI3>,
+                                                <&clks IMX6QDL_CLK_ECSPI3>;
                                        clock-names = "ipg", "per";
                                        dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
                                        dma-names = "rx", "tx";
@@ -238,7 +247,8 @@ ecspi4: ecspi@02014000 {
                                        compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
                                        reg = <0x02014000 0x4000>;
                                        interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 115>, <&clks 115>;
+                                       clocks = <&clks IMX6QDL_CLK_ECSPI4>,
+                                                <&clks IMX6QDL_CLK_ECSPI4>;
                                        clock-names = "ipg", "per";
                                        dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
                                        dma-names = "rx", "tx";
@@ -249,7 +259,8 @@ uart1: serial@02020000 {
                                        compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                        reg = <0x02020000 0x4000>;
                                        interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 160>, <&clks 161>;
+                                       clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+                                                <&clks IMX6QDL_CLK_UART_SERIAL>;
                                        clock-names = "ipg", "per";
                                        dmas = <&sdma 25 4 0>, <&sdma 26 4 0>;
                                        dma-names = "rx", "tx";
@@ -267,7 +278,7 @@ ssi1: ssi@02028000 {
                                                        "fsl,imx21-ssi";
                                        reg = <0x02028000 0x4000>;
                                        interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 178>;
+                                       clocks = <&clks IMX6QDL_CLK_SSI1_IPG>;
                                        dmas = <&sdma 37 1 0>,
                                               <&sdma 38 1 0>;
                                        dma-names = "rx", "tx";
@@ -281,7 +292,7 @@ ssi2: ssi@0202c000 {
                                                        "fsl,imx21-ssi";
                                        reg = <0x0202c000 0x4000>;
                                        interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 179>;
+                                       clocks = <&clks IMX6QDL_CLK_SSI2_IPG>;
                                        dmas = <&sdma 41 1 0>,
                                               <&sdma 42 1 0>;
                                        dma-names = "rx", "tx";
@@ -295,7 +306,7 @@ ssi3: ssi@02030000 {
                                                        "fsl,imx21-ssi";
                                        reg = <0x02030000 0x4000>;
                                        interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>;
-                                       clocks = <&clks 180>;
+                                       clocks = <&clks IMX6QDL_CLK_SSI3_IPG>;
                                        dmas = <&sdma 45 1 0>,
                                               <&sdma 46 1 0>;
                                        dma-names = "rx", "tx";
@@ -328,7 +339,8 @@ pwm1: pwm@02080000 {
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x02080000 0x4000>;
                                interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 62>, <&clks 145>;
+                               clocks = <&clks IMX6QDL_CLK_IPG>,
+                                        <&clks IMX6QDL_CLK_PWM1>;
                                clock-names = "ipg", "per";
                        };
 
@@ -337,7 +349,8 @@ pwm2: pwm@02084000 {
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x02084000 0x4000>;
                                interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 62>, <&clks 146>;
+                               clocks = <&clks IMX6QDL_CLK_IPG>,
+                                        <&clks IMX6QDL_CLK_PWM2>;
                                clock-names = "ipg", "per";
                        };
 
@@ -346,7 +359,8 @@ pwm3: pwm@02088000 {
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x02088000 0x4000>;
                                interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 62>, <&clks 147>;
+                               clocks = <&clks IMX6QDL_CLK_IPG>,
+                                        <&clks IMX6QDL_CLK_PWM3>;
                                clock-names = "ipg", "per";
                        };
 
@@ -355,7 +369,8 @@ pwm4: pwm@0208c000 {
                                compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm";
                                reg = <0x0208c000 0x4000>;
                                interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 62>, <&clks 148>;
+                               clocks = <&clks IMX6QDL_CLK_IPG>,
+                                        <&clks IMX6QDL_CLK_PWM4>;
                                clock-names = "ipg", "per";
                        };
 
@@ -363,7 +378,8 @@ can1: flexcan@02090000 {
                                compatible = "fsl,imx6q-flexcan";
                                reg = <0x02090000 0x4000>;
                                interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 108>, <&clks 109>;
+                               clocks = <&clks IMX6QDL_CLK_CAN1_IPG>,
+                                        <&clks IMX6QDL_CLK_CAN1_SERIAL>;
                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -372,7 +388,8 @@ can2: flexcan@02094000 {
                                compatible = "fsl,imx6q-flexcan";
                                reg = <0x02094000 0x4000>;
                                interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 110>, <&clks 111>;
+                               clocks = <&clks IMX6QDL_CLK_CAN2_IPG>,
+                                        <&clks IMX6QDL_CLK_CAN2_SERIAL>;
                                clock-names = "ipg", "per";
                                status = "disabled";
                        };
@@ -381,7 +398,8 @@ gpt: gpt@02098000 {
                                compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt";
                                reg = <0x02098000 0x4000>;
                                interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 119>, <&clks 120>;
+                               clocks = <&clks IMX6QDL_CLK_GPT_IPG>,
+                                        <&clks IMX6QDL_CLK_GPT_IPG_PER>;
                                clock-names = "ipg", "per";
                        };
 
@@ -466,21 +484,21 @@ kpp: kpp@020b8000 {
                                compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp";
                                reg = <0x020b8000 0x4000>;
                                interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 62>;
+                               clocks = <&clks IMX6QDL_CLK_IPG>;
                        };
 
                        wdog1: wdog@020bc000 {
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020bc000 0x4000>;
                                interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 0>;
+                               clocks = <&clks IMX6QDL_CLK_DUMMY>;
                        };
 
                        wdog2: wdog@020c0000 {
                                compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt";
                                reg = <0x020c0000 0x4000>;
                                interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 0>;
+                               clocks = <&clks IMX6QDL_CLK_DUMMY>;
                                status = "disabled";
                        };
 
@@ -598,14 +616,14 @@ tempmon: tempmon {
                                interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
                                fsl,tempmon = <&anatop>;
                                fsl,tempmon-data = <&ocotp>;
-                               clocks = <&clks 172>;
+                               clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
                        };
 
                        usbphy1: usbphy@020c9000 {
                                compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
                                reg = <0x020c9000 0x1000>;
                                interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 182>;
+                               clocks = <&clks IMX6QDL_CLK_USBPHY1>;
                                fsl,anatop = <&anatop>;
                        };
 
@@ -613,7 +631,7 @@ usbphy2: usbphy@020ca000 {
                                compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
                                reg = <0x020ca000 0x1000>;
                                interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 183>;
+                               clocks = <&clks IMX6QDL_CLK_USBPHY2>;
                                fsl,anatop = <&anatop>;
                        };
 
@@ -726,7 +744,8 @@ hdmi: hdmi@0120000 {
                                reg = <0x00120000 0x9000>;
                                interrupts = <0 115 0x04>;
                                gpr = <&gpr>;
-                               clocks = <&clks 123>, <&clks 124>;
+                               clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>,
+                                        <&clks IMX6QDL_CLK_HDMI_ISFR>;
                                clock-names = "iahb", "isfr";
                                status = "disabled";
 
@@ -761,7 +780,8 @@ sdma: sdma@020ec000 {
                                compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma";
                                reg = <0x020ec000 0x4000>;
                                interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 155>, <&clks 155>;
+                               clocks = <&clks IMX6QDL_CLK_SDMA>,
+                                        <&clks IMX6QDL_CLK_SDMA>;
                                clock-names = "ipg", "ahb";
                                #dma-cells = <3>;
                                fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
@@ -789,7 +809,7 @@ usbotg: usb@02184000 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184000 0x200>;
                                interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 162>;
+                               clocks = <&clks IMX6QDL_CLK_USBOH3>;
                                fsl,usbphy = <&usbphy1>;
                                fsl,usbmisc = <&usbmisc 0>;
                                status = "disabled";
@@ -799,7 +819,7 @@ usbh1: usb@02184200 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184200 0x200>;
                                interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 162>;
+                               clocks = <&clks IMX6QDL_CLK_USBOH3>;
                                fsl,usbphy = <&usbphy2>;
                                fsl,usbmisc = <&usbmisc 1>;
                                status = "disabled";
@@ -809,7 +829,7 @@ usbh2: usb@02184400 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184400 0x200>;
                                interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 162>;
+                               clocks = <&clks IMX6QDL_CLK_USBOH3>;
                                fsl,usbmisc = <&usbmisc 2>;
                                status = "disabled";
                        };
@@ -818,7 +838,7 @@ usbh3: usb@02184600 {
                                compatible = "fsl,imx6q-usb", "fsl,imx27-usb";
                                reg = <0x02184600 0x200>;
                                interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 162>;
+                               clocks = <&clks IMX6QDL_CLK_USBOH3>;
                                fsl,usbmisc = <&usbmisc 3>;
                                status = "disabled";
                        };
@@ -827,7 +847,7 @@ usbmisc: usbmisc@02184800 {
                                #index-cells = <1>;
                                compatible = "fsl,imx6q-usbmisc";
                                reg = <0x02184800 0x200>;
-                               clocks = <&clks 162>;
+                               clocks = <&clks IMX6QDL_CLK_USBOH3>;
                        };
 
                        fec: ethernet@02188000 {
@@ -836,7 +856,9 @@ fec: ethernet@02188000 {
                                interrupts-extended =
                                        <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>,
                                        <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 117>, <&clks 117>, <&clks 190>;
+                               clocks = <&clks IMX6QDL_CLK_ENET>,
+                                        <&clks IMX6QDL_CLK_ENET>,
+                                        <&clks IMX6QDL_CLK_ENET_REF>;
                                clock-names = "ipg", "ahb", "ptp";
                                status = "disabled";
                        };
@@ -852,7 +874,9 @@ usdhc1: usdhc@02190000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02190000 0x4000>;
                                interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 163>, <&clks 163>, <&clks 163>;
+                               clocks = <&clks IMX6QDL_CLK_USDHC1>,
+                                        <&clks IMX6QDL_CLK_USDHC1>,
+                                        <&clks IMX6QDL_CLK_USDHC1>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
                                status = "disabled";
@@ -862,7 +886,9 @@ usdhc2: usdhc@02194000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02194000 0x4000>;
                                interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 164>, <&clks 164>, <&clks 164>;
+                               clocks = <&clks IMX6QDL_CLK_USDHC2>,
+                                        <&clks IMX6QDL_CLK_USDHC2>,
+                                        <&clks IMX6QDL_CLK_USDHC2>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
                                status = "disabled";
@@ -872,7 +898,9 @@ usdhc3: usdhc@02198000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x02198000 0x4000>;
                                interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 165>, <&clks 165>, <&clks 165>;
+                               clocks = <&clks IMX6QDL_CLK_USDHC3>,
+                                        <&clks IMX6QDL_CLK_USDHC3>,
+                                        <&clks IMX6QDL_CLK_USDHC3>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
                                status = "disabled";
@@ -882,7 +910,9 @@ usdhc4: usdhc@0219c000 {
                                compatible = "fsl,imx6q-usdhc";
                                reg = <0x0219c000 0x4000>;
                                interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 166>, <&clks 166>, <&clks 166>;
+                               clocks = <&clks IMX6QDL_CLK_USDHC4>,
+                                        <&clks IMX6QDL_CLK_USDHC4>,
+                                        <&clks IMX6QDL_CLK_USDHC4>;
                                clock-names = "ipg", "ahb", "per";
                                bus-width = <4>;
                                status = "disabled";
@@ -894,7 +924,7 @@ i2c1: i2c@021a0000 {
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021a0000 0x4000>;
                                interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 125>;
+                               clocks = <&clks IMX6QDL_CLK_I2C1>;
                                status = "disabled";
                        };
 
@@ -904,7 +934,7 @@ i2c2: i2c@021a4000 {
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021a4000 0x4000>;
                                interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 126>;
+                               clocks = <&clks IMX6QDL_CLK_I2C2>;
                                status = "disabled";
                        };
 
@@ -914,7 +944,7 @@ i2c3: i2c@021a8000 {
                                compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c";
                                reg = <0x021a8000 0x4000>;
                                interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 127>;
+                               clocks = <&clks IMX6QDL_CLK_I2C3>;
                                status = "disabled";
                        };
 
@@ -935,7 +965,7 @@ weim: weim@021b8000 {
                                compatible = "fsl,imx6q-weim";
                                reg = <0x021b8000 0x4000>;
                                interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 196>;
+                               clocks = <&clks IMX6QDL_CLK_EIM_SLOW>;
                        };
 
                        ocotp: ocotp@021bc000 {
@@ -995,7 +1025,8 @@ uart2: serial@021e8000 {
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021e8000 0x4000>;
                                interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 160>, <&clks 161>;
+                               clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+                                        <&clks IMX6QDL_CLK_UART_SERIAL>;
                                clock-names = "ipg", "per";
                                dmas = <&sdma 27 4 0>, <&sdma 28 4 0>;
                                dma-names = "rx", "tx";
@@ -1006,7 +1037,8 @@ uart3: serial@021ec000 {
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021ec000 0x4000>;
                                interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 160>, <&clks 161>;
+                               clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+                                        <&clks IMX6QDL_CLK_UART_SERIAL>;
                                clock-names = "ipg", "per";
                                dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
                                dma-names = "rx", "tx";
@@ -1017,7 +1049,8 @@ uart4: serial@021f0000 {
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021f0000 0x4000>;
                                interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 160>, <&clks 161>;
+                               clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+                                        <&clks IMX6QDL_CLK_UART_SERIAL>;
                                clock-names = "ipg", "per";
                                dmas = <&sdma 31 4 0>, <&sdma 32 4 0>;
                                dma-names = "rx", "tx";
@@ -1028,7 +1061,8 @@ uart5: serial@021f4000 {
                                compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
                                reg = <0x021f4000 0x4000>;
                                interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>;
-                               clocks = <&clks 160>, <&clks 161>;
+                               clocks = <&clks IMX6QDL_CLK_UART_IPG>,
+                                        <&clks IMX6QDL_CLK_UART_SERIAL>;
                                clock-names = "ipg", "per";
                                dmas = <&sdma 33 4 0>, <&sdma 34 4 0>;
                                dma-names = "rx", "tx";
@@ -1043,7 +1077,9 @@ ipu1: ipu@02400000 {
                        reg = <0x02400000 0x400000>;
                        interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>,
                                     <0 5 IRQ_TYPE_LEVEL_HIGH>;
-                       clocks = <&clks 130>, <&clks 131>, <&clks 132>;
+                       clocks = <&clks IMX6QDL_CLK_IPU1>,
+                                <&clks IMX6QDL_CLK_IPU1_DI0>,
+                                <&clks IMX6QDL_CLK_IPU1_DI1>;
                        clock-names = "bus", "di0", "di1";
                        resets = <&src 2>;