ARM: dts: k2e-evm: add AEMIF/NAND device entry

Add AEMIF/NAND device entry.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

diff --git a/arch/arm/boot/dts/k2e-evm.dts b/arch/arm/boot/dts/k2e-evm.dts
index d60ce34c249511617f0277b5f6f94a1f9deb307a..fb7afab7eed54da4442a2ef552eae9eefcb01104 100644 (file)
--- a/arch/arm/boot/dts/k2e-evm.dts
+++ b/arch/arm/boot/dts/k2e-evm.dts
@@ -65,3 +65,55 @@ dtt@50 {
                reg = <0x50>;
        };
 };
+
+&aemif {
+       cs0 {
+               #address-cells = <2>;
+               #size-cells = <1>;
+               clock-ranges;
+               ranges;
+
+               ti,cs-chipselect = <0>;
+               /* all timings in nanoseconds */
+               ti,cs-min-turnaround-ns = <12>;
+               ti,cs-read-hold-ns = <6>;
+               ti,cs-read-strobe-ns = <23>;
+               ti,cs-read-setup-ns = <9>;
+               ti,cs-write-hold-ns = <8>;
+               ti,cs-write-strobe-ns = <23>;
+               ti,cs-write-setup-ns = <8>;
+
+               nand@0,0 {
+                       compatible = "ti,keystone-nand","ti,davinci-nand";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       reg = <0 0 0x4000000
+                              1 0 0x0000100>;
+
+                       ti,davinci-chipselect = <0>;
+                       ti,davinci-mask-ale = <0x2000>;
+                       ti,davinci-mask-cle = <0x4000>;
+                       ti,davinci-mask-chipsel = <0>;
+                       nand-ecc-mode = "hw";
+                       ti,davinci-ecc-bits = <4>;
+                       nand-on-flash-bbt;
+
+                       partition@0 {
+                               label = "u-boot";
+                               reg = <0x0 0x100000>;
+                               read-only;
+                       };
+
+                       partition@100000 {
+                               label = "params";
+                               reg = <0x100000 0x80000>;
+                               read-only;
+                       };
+
+                       partition@180000 {
+                               label = "ubifs";
+                               reg = <0x180000 0x1FE80000>;
+                       };
+               };
+       };
+};