Add XFAIL and POSIX 1003.3 standard codes (UNRESOLVED/
UNTESTED/UNSUPPORTED) as result codes. These are used for the
results that test case is expected to fail or unsupported
feature (by config).
To return these result code, this introduces exit_unresolved,
exit_untested, exit_unsupported and exit_xfail functions,
which use real-time signals to notify the result code to
ftracetest.
This also set "errexit" option for the testcases, so that
the tests don't need to exit explicitly.
Note that if the test returns UNRESOLVED/UNSUPPORTED/FAIL,
its test log including executed commands is shown on console
and main logfile as below.
------
# ./ftracetest samples/
=== Ftrace unit tests ===
[1] failure-case example [FAIL]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/fail.tc
++ cat non-exist-file
cat: non-exist-file: No such file or directory
[2] pass-case example [PASS]
[3] unresolved-case example [UNRESOLVED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unresolved.tc
++ trap exit_unresolved INT
++ kill -INT 29324
+++ exit_unresolved
+++ kill -s 38 29265
+++ exit 0
[4] unsupported-case example [UNSUPPORTED]
execute: /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
+ . /home/fedora/ksrc/linux-3/tools/testing/selftests/ftrace/samples/unsupported.tc
++ exit_unsupported
++ kill -s 40 29265
++ exit 0
[5] untested-case example [UNTESTED]
[6] xfail-case example [XFAIL]
# of passed: 1
# of failed: 1
# of unresolved: 1
# of untested: 1
# of unsupported: 1
# of xfailed: 1
# of undefined(test bug): 0
------
Link: http://lkml.kernel.org/p/20140929120211.30203.99510.stgit@kbuild-f20.novalocal
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
* The test cases should run on dash (busybox shell) for testing on
minimal cross-build environments.
+ * Note that the tests are run with "set -e" (errexit) option. If any
+ command fails, the test will be terminated immediately.
+
+ * The tests can return some result codes instead of pass or fail by
+ using exit_unresolved, exit_untested, exit_unsupported and exit_xfail.
+
+Result code
+===========
+
+Ftracetest supports following result codes.
+
+ * PASS: The test succeeded as expected. The test which exits with 0 is
+ counted as passed test.
+
+ * FAIL: The test failed, but was expected to succeed. The test which exits
+ with !0 is counted as failed test.
+
+ * UNRESOLVED: The test produced unclear or intermidiate results.
+ for example, the test was interrupted
+ or the test depends on a previous test, which failed.
+ or the test was set up incorrectly
+ The test which is in above situation, must call exit_unresolved.
+
+ * UNTESTED: The test was not run, currently just a placeholder.
+ In this case, the test must call exit_untested.
+
+ * UNSUPPORTED: The test failed because of lack of feature.
+ In this case, the test must call exit_unsupported.
+
+ * XFAIL: The test failed, and was expected to fail.
+ To return XFAIL, call exit_xfail from the test.
+
+There are some sample test scripts for result code under samples/.
+You can also run samples as below:
+
+ # ./ftracetest samples/
+
TODO
====
# Testcase management
+# Test result codes - Dejagnu extended code
+PASS=0 # The test succeeded.
+FAIL=1 # The test failed, but was expected to succeed.
+UNRESOLVED=2 # The test produced indeterminate results. (e.g. interrupted)
+UNTESTED=3 # The test was not run, currently just a placeholder.
+UNSUPPORTED=4 # The test failed because of lack of feature.
+XFAIL=5 # The test failed, and was expected to fail.
+
+# Accumulations
PASSED_CASES=
FAILED_CASES=
+UNRESOLVED_CASES=
+UNTESTED_CASES=
+UNSUPPORTED_CASES=
+XFAILED_CASES=
+UNDEFINED_CASES=
+TOTAL_RESULT=0
+
CASENO=0
testcase() { # testfile
CASENO=$((CASENO+1))
prlog -n "[$CASENO]"`grep "^#[ \t]*description:" $1 | cut -f2 -d:`
}
-failed() {
- prlog " [FAIL]"
- FAILED_CASES="$FAILED_CASES $CASENO"
+
+eval_result() { # retval sigval
+ local retval=$2
+ if [ $2 -eq 0 ]; then
+ test $1 -ne 0 && retval=$FAIL
+ fi
+ case $retval in
+ $PASS)
+ prlog " [PASS]"
+ PASSED_CASES="$PASSED_CASES $CASENO"
+ return 0
+ ;;
+ $FAIL)
+ prlog " [FAIL]"
+ FAILED_CASES="$FAILED_CASES $CASENO"
+ return 1 # this is a bug.
+ ;;
+ $UNRESOLVED)
+ prlog " [UNRESOLVED]"
+ UNRESOLVED_CASES="$UNRESOLVED_CASES $CASENO"
+ return 1 # this is a kind of bug.. something happened.
+ ;;
+ $UNTESTED)
+ prlog " [UNTESTED]"
+ UNTESTED_CASES="$UNTESTED_CASES $CASENO"
+ return 0
+ ;;
+ $UNSUPPORTED)
+ prlog " [UNSUPPORTED]"
+ UNSUPPORTED_CASES="$UNSUPPORTED_CASES $CASENO"
+ return 1 # this is not a bug, but the result should be reported.
+ ;;
+ $XFAIL)
+ prlog " [XFAIL]"
+ XFAILED_CASES="$XFAILED_CASES $CASENO"
+ return 0
+ ;;
+ *)
+ prlog " [UNDEFINED]"
+ UNDEFINED_CASES="$UNDEFINED_CASES $CASENO"
+ return 1 # this must be a test bug
+ ;;
+ esac
+}
+
+# Signal handling for result codes
+SIG_RESULT=
+SIG_BASE=36 # Use realtime signals
+SIG_PID=$$
+
+SIG_UNRESOLVED=$((SIG_BASE + UNRESOLVED))
+exit_unresolved () {
+ kill -s $SIG_UNRESOLVED $SIG_PID
+ exit 0
+}
+trap 'SIG_RESULT=$UNRESOLVED' $SIG_UNRESOLVED
+
+SIG_UNTESTED=$((SIG_BASE + UNTESTED))
+exit_untested () {
+ kill -s $SIG_UNTESTED $SIG_PID
+ exit 0
}
-passed() {
- prlog " [PASS]"
- PASSED_CASES="$PASSED_CASES $CASENO"
+trap 'SIG_RESULT=$UNTESTED' $SIG_UNTESTED
+
+SIG_UNSUPPORTED=$((SIG_BASE + UNSUPPORTED))
+exit_unsupported () {
+ kill -s $SIG_UNSUPPORTED $SIG_PID
+ exit 0
}
+trap 'SIG_RESULT=$UNSUPPORTED' $SIG_UNSUPPORTED
+SIG_XFAIL=$((SIG_BASE + XFAIL))
+exit_xfail () {
+ kill -s $SIG_XFAIL $SIG_PID
+ exit 0
+}
+trap 'SIG_RESULT=$XFAIL' $SIG_XFAIL
# Run one test case
run_test() { # testfile
local testlog=`mktemp --tmpdir=$LOG_DIR ${testname}-XXXXXX.log`
testcase $1
echo "execute: "$1 > $testlog
- (cd $TRACING_DIR; set -x ; . $1) >> $testlog 2>&1
- ret=$?
- if [ $ret -ne 0 ]; then
- failed
- catlog $testlog
- else
- passed
+ SIG_RESULT=0
+ # setup PID and PPID, $$ is not updated.
+ (cd $TRACING_DIR; read PID _ < /proc/self/stat ;
+ set -e; set -x; . $1) >> $testlog 2>&1
+ eval_result $? $SIG_RESULT
+ if [ $? -eq 0 ]; then
+ # Remove test log if the test was done as it was expected.
[ $KEEP_LOG -eq 0 ] && rm $testlog
+ else
+ catlog $testlog
+ TOTAL_RESULT=1
fi
}
for t in $TEST_CASES; do
run_test $t
done
+
prlog ""
prlog "# of passed: " `echo $PASSED_CASES | wc -w`
prlog "# of failed: " `echo $FAILED_CASES | wc -w`
-
-test -z "$FAILED_CASES" # if no error, return 0
+prlog "# of unresolved: " `echo $UNRESOLVED_CASES | wc -w`
+prlog "# of untested: " `echo $UNTESTED_CASES | wc -w`
+prlog "# of unsupported: " `echo $UNSUPPORTED_CASES | wc -w`
+prlog "# of xfailed: " `echo $XFAILED_CASES | wc -w`
+prlog "# of undefined(test bug): " `echo $UNDEFINED_CASES | wc -w`
+
+# if no error, return 0
+exit $TOTAL_RESULT
--- /dev/null
+#!/bin/sh
+# description: failure-case example
+cat non-exist-file
+echo "this is not executed"
--- /dev/null
+#!/bin/sh
+# description: pass-case example
+return 0
--- /dev/null
+#!/bin/sh
+# description: unresolved-case example
+trap exit_unresolved INT
+kill -INT $PID
--- /dev/null
+#!/bin/sh
+# description: unsupported-case example
+exit_unsupported
--- /dev/null
+#!/bin/sh
+# description: untested-case example
+exit_untested
--- /dev/null
+#!/bin/sh
+# description: xfail-case example
+cat non-exist-file || exit_xfail
#!/bin/sh
# description: Basic test for tracers
+test -f available_tracers
for t in `cat available_tracers`; do
- echo $t > current_tracer || exit 1
+ echo $t > current_tracer
done
echo nop > current_tracer
#!/bin/sh
# description: Basic trace clock test
-[ -f trace_clock ] || exit 1
+test -f trace_clock
for c in `cat trace_clock | tr -d \[\]`; do
- echo $c > trace_clock || exit 1
- grep '\['$c'\]' trace_clock || exit 1
+ echo $c > trace_clock
+ grep '\['$c'\]' trace_clock
done
echo local > trace_clock
#!/bin/sh
# description: Kprobe dynamic event - adding and removing
-[ -f kprobe_events ] || exit 1
+[ -f kprobe_events ] || exit_unsupported # this is configurable
-echo 0 > events/enable || exit 1
-echo > kprobe_events || exit 1
-echo p:myevent do_fork > kprobe_events || exit 1
-grep myevent kprobe_events || exit 1
-[ -d events/kprobes/myevent ] || exit 1
+echo 0 > events/enable
+echo > kprobe_events
+echo p:myevent do_fork > kprobe_events
+grep myevent kprobe_events
+test -d events/kprobes/myevent
echo > kprobe_events
#!/bin/sh
# description: Kprobe dynamic event - busy event check
-[ -f kprobe_events ] || exit 1
+[ -f kprobe_events ] || exit_unsupported
-echo 0 > events/enable || exit 1
-echo > kprobe_events || exit 1
-echo p:myevent do_fork > kprobe_events || exit 1
-[ -d events/kprobes/myevent ] || exit 1
-echo 1 > events/kprobes/myevent/enable || exit 1
+echo 0 > events/enable
+echo > kprobe_events
+echo p:myevent do_fork > kprobe_events
+test -d events/kprobes/myevent
+echo 1 > events/kprobes/myevent/enable
echo > kprobe_events && exit 1 # this must fail
-echo 0 > events/kprobes/myevent/enable || exit 1
+echo 0 > events/kprobes/myevent/enable
echo > kprobe_events # this must succeed
-
#!/bin/sh
# description: %HERE DESCRIBE WHAT THIS DOES%
# you have to add ".tc" extention for your testcase file
+# Note that all tests are run with "errexit" option.
+
exit 0 # Return 0 if the test is passed, otherwise return !0
+# If the test could not run because of lack of feature, call exit_unsupported
+# If the test returned unclear results, call exit_unresolved
+# If the test is a dummy, or a placeholder, call exit_untested
projects / linux.git / commitdiff