ARM: dts: dra7: Use sdhci-omap programming model

Use sdhci-omap programming model based on the generic sdhci
library for programming the eMMC/SD/SDIO controller.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 6204a266212a2516183d2d33b6898be81bd09f92..ad953113cefbda10f32bf03c6b11e0551dad8834 100644 (file)
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -444,8 +444,8 @@ &mmc2 {
        vmmc-supply = <&vdd_3v3>;
        vqmmc-supply = <&vdd_3v3>;
        bus-width = <8>;
-       ti,non-removable;
-       cap-mmc-dual-data-rate;
+       non-removable;
+       no-1-8-v;
 };
 
 &sata {

diff --git a/arch/arm/boot/dts/am57xx-beagle-x15.dts b/arch/arm/boot/dts/am57xx-beagle-x15.dts
index c76ea6579a8159091385ac0512010b9ca982922b..70a71c641066be2b9c0f01824e9a0e173ae55457 100644 (file)
--- a/arch/arm/boot/dts/am57xx-beagle-x15.dts
+++ b/arch/arm/boot/dts/am57xx-beagle-x15.dts
@@ -25,6 +25,7 @@ &mmc1 {
        pinctrl-1 = <&mmc1_pins_hs>;
 
        vmmc-supply = <&ldo1_reg>;
+       no-1-8-v;
 };
 
 &mmc2 {

diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index 43a6d0590f7c6facb9fb2490ce72ba33dba871fc..ad87f1ae904db15c313678c5b59c68bb78fdb733 100644 (file)
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -412,8 +412,9 @@ &mmc2 {
        vmmc-supply = <&v3_3d>;
        vqmmc-supply = <&v3_3d>;
        bus-width = <8>;
-       ti,non-removable;
+       non-removable;
        max-frequency = <96000000>;
+       no-1-8-v;
 };
 
 &dcan1 {

diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index 704947cbef48c43d893cdf832a3704a516db2efb..0894593860d6dd622b169c10c9f5a9c75354483a 100644 (file)
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -377,6 +377,7 @@ &mmc2 {
        vmmc-supply = <&evm_1v8_sw>;
        vqmmc-supply = <&evm_1v8_sw>;
        bus-width = <8>;
+       non-removable;
        pinctrl-names = "default", "hs", "ddr_1_8v-rev11", "ddr_1_8v", "hs200_1_8v-rev11", "hs200_1_8v";
        pinctrl-0 = <&mmc2_pins_default>;
        pinctrl-1 = <&mmc2_pins_hs>;

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index f4ddd86f2c774a452cb4d711c434fa0f283310d6..ae2f8dd46328e8afd5499f8c05279cd540d632cf 100644 (file)
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1079,14 +1079,10 @@ i2c5: i2c@4807c000 {
                };
 
                mmc1: mmc@4809c000 {
-                       compatible = "ti,omap4-hsmmc";
+                       compatible = "ti,dra7-sdhci";
                        reg = <0x4809c000 0x400>;
                        interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmc1";
-                       ti,dual-volt;
-                       ti,needs-special-reset;
-                       dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
-                       dma-names = "tx", "rx";
                        status = "disabled";
                        pbias-supply = <&pbias_mmc_reg>;
                        max-frequency = <192000000>;
@@ -1100,40 +1096,37 @@ hdqw1w: 1w@480b2000 {
                };
 
                mmc2: mmc@480b4000 {
-                       compatible = "ti,omap4-hsmmc";
+                       compatible = "ti,dra7-sdhci";
                        reg = <0x480b4000 0x400>;
                        interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmc2";
-                       ti,needs-special-reset;
-                       dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
-                       dma-names = "tx", "rx";
                        status = "disabled";
                        max-frequency = <192000000>;
+                       /* SDR104/DDR50/SDR50 bits in CAPA2 is not supported */
+                       sdhci-caps-mask = <0x7 0x0>;
                };
 
                mmc3: mmc@480ad000 {
-                       compatible = "ti,omap4-hsmmc";
+                       compatible = "ti,dra7-sdhci";
                        reg = <0x480ad000 0x400>;
                        interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmc3";
-                       ti,needs-special-reset;
-                       dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
-                       dma-names = "tx", "rx";
                        status = "disabled";
                        /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
                        max-frequency = <64000000>;
+                       /* SDMA is not supported */
+                       sdhci-caps-mask = <0x0 0x400000>;
                };
 
                mmc4: mmc@480d1000 {
-                       compatible = "ti,omap4-hsmmc";
+                       compatible = "ti,dra7-sdhci";
                        reg = <0x480d1000 0x400>;
                        interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "mmc4";
-                       ti,needs-special-reset;
-                       dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
-                       dma-names = "tx", "rx";
                        status = "disabled";
                        max-frequency = <192000000>;
+                       /* SDMA is not supported */
+                       sdhci-caps-mask = <0x0 0x400000>;
                };
 
                mmu0_dsp1: mmu@40d01000 {

diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index b81214051a892e814017fd97bb8374a3581655bd..df174f5c15d1d4161721ef9ec06b91806f56e548 100644 (file)
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -413,7 +413,7 @@ &mmc2 {
        pinctrl-names = "default";
        pinctrl-0 = <&mmc2_pins_default>;
        bus-width = <8>;
-       ti,non-removable;
+       non-removable;
        max-frequency = <192000000>;
 };
 

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index ad154c7b063273264389418e6c269281f0651abd..c07f0051844dcace1d6093371d89c037cc4a7b6b 100644 (file)
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -327,7 +327,7 @@ &cpu0 {
 &mmc1 {
        status = "okay";
        vmmc-supply = <&vio_3v3_sd>;
-       vmmc_aux-supply = <&ldo4_reg>;
+       vqmmc-supply = <&ldo4_reg>;
        bus-width = <4>;
        /*
         * SDCD signal is not being used here - using the fact that GPIO mode
@@ -344,6 +344,7 @@ &mmc2 {
        vmmc-supply = <&vio_1v8>;
        vqmmc-supply = <&vio_1v8>;
        bus-width = <8>;
+       non-removable;
        pinctrl-names = "default", "hs", "ddr_1_8v", "hs200_1_8v";
        pinctrl-0 = <&mmc2_pins_default>;
        pinctrl-1 = <&mmc2_pins_default>;