]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
staging: kpc2000: kpc_i2c: newline fixups to meet linux style guide
authorGeordan Neukum <gneukum1@gmail.com>
Wed, 22 May 2019 12:13:59 +0000 (12:13 +0000)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 22 May 2019 12:47:16 +0000 (14:47 +0200)
The linux coding style document states:

  1) That braces should not be used where a single single statement
     will do. Therefore all instances of single block statements
     wrapped in braces that do not meet the qualifications of any
     of the exceptions to the rule should be fixed up.

  2) That the declaration of variables local to a given function
     should be immediately followed by a blank newline. Therefore,
     the single instance of this in kpc2000_i2c.c should be fixed
     up.

Signed-off-by: Geordan Neukum <gneukum1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/kpc2000/kpc2000_i2c.c

index 40a89998726e82ebfa21eda83b7dd05c7f4815c3..a1ebc2386d7003f4794b474c7ffe4851419d04a9 100644 (file)
@@ -178,9 +178,8 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
 
                /* Check if it worked */
                status = inb_p(SMBHSTSTS(priv));
-               if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED)) {
+               if ((status & SMBHSTSTS_HOST_BUSY) || !(status & SMBHSTSTS_FAILED))
                        dev_err(&priv->adapter.dev, "Failed terminating the transaction\n");
-               }
                outb_p(STATUS_FLAGS, SMBHSTSTS(priv));
                return -ETIMEDOUT;
        }
@@ -202,9 +201,8 @@ static int i801_check_post(struct i2c_device *priv, int status, int timeout)
                /* Clear error flags */
                outb_p(status & STATUS_FLAGS, SMBHSTSTS(priv));
                status = inb_p(SMBHSTSTS(priv)) & STATUS_FLAGS;
-               if (status) {
+               if (status)
                        dev_warn(&priv->adapter.dev, "Failed clearing status flags at end of transaction (%02x)\n", status);
-               }
        }
 
        return result;
@@ -219,9 +217,8 @@ static int i801_transaction(struct i2c_device *priv, int xact)
        dev_dbg(&priv->adapter.dev, "%s\n", __func__);
 
        result = i801_check_pre(priv);
-       if (result < 0) {
+       if (result < 0)
                return result;
-       }
        /* the current contents of SMBHSTCNT can be overwritten, since PEC,
         * INTREN, SMBSCMD are passed in xact
         */
@@ -234,9 +231,8 @@ static int i801_transaction(struct i2c_device *priv, int xact)
        } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES));
 
        result = i801_check_post(priv, status, timeout > MAX_RETRIES);
-       if (result < 0) {
+       if (result < 0)
                return result;
-       }
 
        outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
        return 0;
@@ -255,9 +251,8 @@ static void i801_wait_hwpec(struct i2c_device *priv)
                status = inb_p(SMBHSTSTS(priv));
        } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_RETRIES));
 
-       if (timeout > MAX_RETRIES) {
+       if (timeout > MAX_RETRIES)
                dev_dbg(&priv->adapter.dev, "PEC Timeout!\n");
-       }
 
        outb_p(status, SMBHSTSTS(priv));
 }
@@ -275,26 +270,22 @@ static int i801_block_transaction_by_block(struct i2c_device *priv, union i2c_sm
        if (read_write == I2C_SMBUS_WRITE) {
                len = data->block[0];
                outb_p(len, SMBHSTDAT0(priv));
-               for (i = 0; i < len; i++) {
+               for (i = 0; i < len; i++)
                        outb_p(data->block[i+1], SMBBLKDAT(priv));
-               }
        }
 
        status = i801_transaction(priv, I801_BLOCK_DATA | ENABLE_INT9 | I801_PEC_EN * hwpec);
-       if (status) {
+       if (status)
                return status;
-       }
 
        if (read_write == I2C_SMBUS_READ) {
                len = inb_p(SMBHSTDAT0(priv));
-               if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
+               if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
                        return -EPROTO;
-               }
 
                data->block[0] = len;
-               for (i = 0; i < len; i++) {
+               for (i = 0; i < len; i++)
                        data->block[i + 1] = inb_p(SMBBLKDAT(priv));
-               }
        }
        return 0;
 }
@@ -310,9 +301,8 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
        dev_dbg(&priv->adapter.dev, "%s\n", __func__);
 
        result = i801_check_pre(priv);
-       if (result < 0) {
+       if (result < 0)
                return result;
-       }
 
        len = data->block[0];
 
@@ -323,23 +313,20 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
 
        for (i = 1; i <= len; i++) {
                if (i == len && read_write == I2C_SMBUS_READ) {
-                       if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+                       if (command == I2C_SMBUS_I2C_BLOCK_DATA)
                                smbcmd = I801_I2C_BLOCK_LAST;
-                       } else {
+                       else
                                smbcmd = I801_BLOCK_LAST;
-                       }
                } else {
-                       if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ) {
+                       if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_READ)
                                smbcmd = I801_I2C_BLOCK_DATA;
-                       } else {
+                       else
                                smbcmd = I801_BLOCK_DATA;
-                       }
                }
                outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT(priv));
 
-               if (i == 1) {
+               if (i == 1)
                        outb_p(inb(SMBHSTCNT(priv)) | I801_START, SMBHSTCNT(priv));
-               }
                /* We will always wait for a fraction of a second! */
                timeout = 0;
                do {
@@ -348,17 +335,15 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
                } while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_RETRIES));
 
                result = i801_check_post(priv, status, timeout > MAX_RETRIES);
-               if (result < 0) {
+               if (result < 0)
                        return result;
-               }
                if (i == 1 && read_write == I2C_SMBUS_READ && command != I2C_SMBUS_I2C_BLOCK_DATA) {
                        len = inb_p(SMBHSTDAT0(priv));
                        if (len < 1 || len > I2C_SMBUS_BLOCK_MAX) {
                                dev_err(&priv->adapter.dev, "Illegal SMBus block read size %d\n", len);
                                /* Recover */
-                               while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY) {
+                               while (inb_p(SMBHSTSTS(priv)) & SMBHSTSTS_HOST_BUSY)
                                        outb_p(SMBHSTSTS_BYTE_DONE, SMBHSTSTS(priv));
-                               }
                                outb_p(SMBHSTSTS_INTR, SMBHSTSTS(priv));
                                return -EPROTO;
                        }
@@ -366,12 +351,10 @@ static int i801_block_transaction_byte_by_byte(struct i2c_device *priv, union i2
                }
 
                /* Retrieve/store value in SMBBLKDAT */
-               if (read_write == I2C_SMBUS_READ) {
+               if (read_write == I2C_SMBUS_READ)
                        data->block[i] = inb_p(SMBBLKDAT(priv));
-               }
-               if (read_write == I2C_SMBUS_WRITE && i+1 <= len) {
+               if (read_write == I2C_SMBUS_WRITE && i+1 <= len)
                        outb_p(data->block[i+1], SMBBLKDAT(priv));
-               }
                /* signals SMBBLKDAT ready */
                outb_p(SMBHSTSTS_BYTE_DONE | SMBHSTSTS_INTR, SMBHSTSTS(priv));
        }
@@ -384,9 +367,8 @@ static int i801_set_block_buffer_mode(struct i2c_device *priv)
        dev_dbg(&priv->adapter.dev, "%s\n", __func__);
 
        outb_p(inb_p(SMBAUXCTL(priv)) | SMBAUXCTL_E32B, SMBAUXCTL(priv));
-       if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0) {
+       if ((inb_p(SMBAUXCTL(priv)) & SMBAUXCTL_E32B) == 0)
                return -EIO;
-       }
        return 0;
 }
 
@@ -411,12 +393,10 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
        }
 
        if (read_write == I2C_SMBUS_WRITE || command == I2C_SMBUS_I2C_BLOCK_DATA) {
-               if (data->block[0] < 1) {
+               if (data->block[0] < 1)
                        data->block[0] = 1;
-               }
-               if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+               if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
                        data->block[0] = I2C_SMBUS_BLOCK_MAX;
-               }
        } else {
                data->block[0] = 32;    /* max for SMBus block reads */
        }
@@ -425,14 +405,12 @@ static int i801_block_transaction(struct i2c_device *priv, union i2c_smbus_data
         * SMBus (not I2C) block transactions, even though the datasheet
         * doesn't mention this limitation.
         */
-       if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0) {
+       if ((priv->features & FEATURE_BLOCK_BUFFER) && command != I2C_SMBUS_I2C_BLOCK_DATA && i801_set_block_buffer_mode(priv) == 0)
                result = i801_block_transaction_by_block(priv, data, read_write, hwpec);
-       } else {
+       else
                result = i801_block_transaction_byte_by_byte(priv, data, read_write, command, hwpec);
-       }
-       if (result == 0 && hwpec) {
+       if (result == 0 && hwpec)
                i801_wait_hwpec(priv);
-       }
        if (command == I2C_SMBUS_I2C_BLOCK_DATA && read_write == I2C_SMBUS_WRITE) {
                /* restore saved configuration register value */
                //TODO: Figure out the right thing to do here...
@@ -465,18 +443,16 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
                dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_BYTE\n");
 
                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
-               if (read_write == I2C_SMBUS_WRITE) {
+               if (read_write == I2C_SMBUS_WRITE)
                        outb_p(command, SMBHSTCMD(priv));
-               }
                xact = I801_BYTE;
                break;
        case I2C_SMBUS_BYTE_DATA:
                dev_dbg(&priv->adapter.dev, "  [acc] SMBUS_BYTE_DATA\n");
                outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), SMBHSTADD(priv));
                outb_p(command, SMBHSTCMD(priv));
-               if (read_write == I2C_SMBUS_WRITE) {
+               if (read_write == I2C_SMBUS_WRITE)
                        outb_p(data->byte, SMBHSTDAT0(priv));
-               }
                xact = I801_BYTE_DATA;
                break;
        case I2C_SMBUS_WORD_DATA:
@@ -633,9 +609,8 @@ int pi2c_probe(struct platform_device *pldev)
                pldev->name);
 
        priv = devm_kzalloc(&pldev->dev, sizeof(*priv), GFP_KERNEL);
-       if (!priv) {
+       if (!priv)
                return -ENOMEM;
-       }
 
        i2c_set_adapdata(&priv->adapter, priv);
        priv->adapter.owner = THIS_MODULE;
@@ -677,6 +652,7 @@ int pi2c_probe(struct platform_device *pldev)
 int pi2c_remove(struct platform_device *pldev)
 {
        struct i2c_device *lddev;
+
        dev_dbg(&pldev->dev, "%s(pldev = %p '%s')\n", __func__, pldev,
                pldev->name);