def_bool y
config ARCH_DISCONTIGMEM_ENABLE
- def_bool y
+ def_bool n
config ARCH_FLATMEM_ENABLE
def_bool y
config ARC_HAS_COH_CACHES
def_bool n
-config ARC_HAS_REENTRANT_IRQ_LV2
- def_bool n
-
config ARC_MCIP
bool "ARConnect Multicore IP (MCIP) Support "
depends on ISA_ARCV2
if ISA_ARCOMPACT
config ARC_COMPACT_IRQ_LEVELS
- bool "ARCompact IRQ Priorities: High(2)/Low(1)"
+ bool "Setup Timer IRQ as high Priority"
default n
- # Timer HAS to be high priority, for any other high priority config
- select ARC_IRQ3_LV2
# if SMP, LV2 enabled ONLY if ARC implementation has LV2 re-entrancy
- depends on !SMP || ARC_HAS_REENTRANT_IRQ_LV2
-
-if ARC_COMPACT_IRQ_LEVELS
-
-config ARC_IRQ3_LV2
- bool
-
-config ARC_IRQ5_LV2
- bool
-
-config ARC_IRQ6_LV2
- bool
-
-endif #ARC_COMPACT_IRQ_LEVELS
+ depends on !SMP
config ARC_FPU_SAVE_RESTORE
bool "Enable FPU state persistence across context switch"
default y
depends on !ARC_CANT_LLSC
-config ARC_STAR_9000923308
- bool "Workaround for llock/scond livelock"
- default n
- depends on ISA_ARCV2 && SMP && ARC_HAS_LLSC
-
config ARC_HAS_SWAPE
bool "Insn: SWAPE (endian-swap)"
default y
config HIGHMEM
bool "High Memory Support"
- select DISCONTIGMEM
+ select ARCH_DISCONTIGMEM_ENABLE
help
With ARC 2G:2G address split, only upper 2G is directly addressable by
kernel. Enable this to potentially allow access to rest of 2G and PAE
boot := arch/arc/boot
-#default target for make without any arguements.
+#default target for make without any arguments.
KBUILD_IMAGE := bootpImage
all: $(KBUILD_IMAGE)
/ {
- clock-frequency = <500000000>; /* 500 MHZ */
-
soc100 {
bus-frequency = <166666666>;
/ {
- clock-frequency = <500000000>; /* 500 MHZ */
-
soc100 {
bus-frequency = <166666666>;
/ {
compatible = "snps,arc";
- clock-frequency = <750000000>; /* 750 MHZ */
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <90000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "ezchip,arc-nps";
- clock-frequency = <83333333>; /* 83.333333 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&intc>;
/ {
compatible = "snps,nsim";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,nsimosci";
- clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,nsimosci_hs";
- clock-frequency = <20000000>; /* 20 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,nsimosci_hs";
- clock-frequency = <5000000>; /* 5 MHZ */
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&core_intc>;
/ {
compatible = "snps,arc";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
/ {
compatible = "snps,arc";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
/ {
compatible = "snps,arc";
- clock-frequency = <80000000>; /* 80 MHZ */
#address-cells = <1>;
#size-cells = <1>;
chosen { };
/ {
compatible = "snps,arc";
- clock-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
/ {
compatible = "snps,arc";
- clock-frequency = <50000000>;
#address-cells = <1>;
#size-cells = <1>;
#define atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-#ifdef CONFIG_ARC_STAR_9000923308
-
-#define SCOND_FAIL_RETRY_VAR_DEF \
- unsigned int delay = 1, tmp; \
-
-#define SCOND_FAIL_RETRY_ASM \
- " bz 4f \n" \
- " ; --- scond fail delay --- \n" \
- " mov %[tmp], %[delay] \n" /* tmp = delay */ \
- "2: brne.d %[tmp], 0, 2b \n" /* while (tmp != 0) */ \
- " sub %[tmp], %[tmp], 1 \n" /* tmp-- */ \
- " rol %[delay], %[delay] \n" /* delay *= 2 */ \
- " b 1b \n" /* start over */ \
- "4: ; --- success --- \n" \
-
-#define SCOND_FAIL_RETRY_VARS \
- ,[delay] "+&r" (delay),[tmp] "=&r" (tmp) \
-
-#else /* !CONFIG_ARC_STAR_9000923308 */
-
-#define SCOND_FAIL_RETRY_VAR_DEF
-
-#define SCOND_FAIL_RETRY_ASM \
- " bnz 1b \n" \
-
-#define SCOND_FAIL_RETRY_VARS
-
-#endif
-
#define ATOMIC_OP(op, c_op, asm_op) \
static inline void atomic_##op(int i, atomic_t *v) \
{ \
- unsigned int val; \
- SCOND_FAIL_RETRY_VAR_DEF \
+ unsigned int val; \
\
__asm__ __volatile__( \
"1: llock %[val], [%[ctr]] \n" \
" " #asm_op " %[val], %[val], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
- " \n" \
- SCOND_FAIL_RETRY_ASM \
- \
+ " bnz 1b \n" \
: [val] "=&r" (val) /* Early clobber to prevent reg reuse */ \
- SCOND_FAIL_RETRY_VARS \
: [ctr] "r" (&v->counter), /* Not "m": llock only supports reg direct addr mode */ \
[i] "ir" (i) \
: "cc"); \
#define ATOMIC_OP_RETURN(op, c_op, asm_op) \
static inline int atomic_##op##_return(int i, atomic_t *v) \
{ \
- unsigned int val; \
- SCOND_FAIL_RETRY_VAR_DEF \
+ unsigned int val; \
\
/* \
* Explicit full memory barrier needed before/after as \
"1: llock %[val], [%[ctr]] \n" \
" " #asm_op " %[val], %[val], %[i] \n" \
" scond %[val], [%[ctr]] \n" \
- " \n" \
- SCOND_FAIL_RETRY_ASM \
- \
+ " bnz 1b \n" \
: [val] "=&r" (val) \
- SCOND_FAIL_RETRY_VARS \
: [ctr] "r" (&v->counter), \
[i] "ir" (i) \
: "cc"); \
* We need to be a bit more cautious here. What if a kernel bug in
* L1 ISR, caused SP to go whaco (some small value which looks like
* USER stk) and then we take L2 ISR.
- * Above brlo alone would treat it as a valid L1-L2 sceanrio
- * instead of shouting alound
+ * Above brlo alone would treat it as a valid L1-L2 scenario
+ * instead of shouting around
* The only feasible way is to make sure this L2 happened in
* L1 prelogue ONLY i.e. ilink2 is less than a pre-set marker in
* L1 ISR before it switches stack
local_flush_tlb_all();
/*
- * Above checke for rollover of 8 bit ASID in 32 bit container.
+ * Above check for rollover of 8 bit ASID in 32 bit container.
* If the container itself wrapped around, set it to a non zero
* "generation" to distinguish from no context
*/
* Page Tables are purely for Linux VM's consumption and the bits below are
* suited to that (uniqueness). Hence some are not implemented in the TLB and
* some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible becoz they live in
+ * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
* seperate PD0 and PD1, which combined forms a translation entry)
* while for PTE perspective, they are 8 and 9 respectively
* with MMU v3: Most bits (except SHARED) represent the exact hardware pos
#define KSTK_ESP(tsk) (task_pt_regs(tsk)->sp)
/*
- * Where abouts of Task's sp, fp, blink when it was last seen in kernel mode.
+ * Where about of Task's sp, fp, blink when it was last seen in kernel mode.
* Look in process.c for details of kernel stack layout
*/
#define TSK_K_ESP(tsk) (tsk->thread.ksp)
* (1) These insn were introduced only in 4.10 release. So for older released
* support needed.
*
- * (2) In a SMP setup, the LLOCK/SCOND atomiticity across CPUs needs to be
+ * (2) In a SMP setup, the LLOCK/SCOND atomicity across CPUs needs to be
* gaurantted by the platform (not something which core handles).
* Assuming a platform won't, SMP Linux needs to use spinlocks + local IRQ
* disabling for atomicity.
#ifdef CONFIG_ARC_HAS_LLSC
-/*
- * A normal LLOCK/SCOND based system, w/o need for livelock workaround
- */
-#ifndef CONFIG_ARC_STAR_9000923308
-
static inline void arch_spin_lock(arch_spinlock_t *lock)
{
unsigned int val;
smp_mb();
}
-#else /* CONFIG_ARC_STAR_9000923308 */
-
-/*
- * HS38x4 could get into a LLOCK/SCOND livelock in case of multiple overlapping
- * coherency transactions in the SCU. The exclusive line state keeps rotating
- * among contenting cores leading to a never ending cycle. So break the cycle
- * by deferring the retry of failed exclusive access (SCOND). The actual delay
- * needed is function of number of contending cores as well as the unrelated
- * coherency traffic from other cores. To keep the code simple, start off with
- * small delay of 1 which would suffice most cases and in case of contention
- * double the delay. Eventually the delay is sufficient such that the coherency
- * pipeline is drained, thus a subsequent exclusive access would succeed.
- */
-
-#define SCOND_FAIL_RETRY_VAR_DEF \
- unsigned int delay, tmp; \
-
-#define SCOND_FAIL_RETRY_ASM \
- " ; --- scond fail delay --- \n" \
- " mov %[tmp], %[delay] \n" /* tmp = delay */ \
- "2: brne.d %[tmp], 0, 2b \n" /* while (tmp != 0) */ \
- " sub %[tmp], %[tmp], 1 \n" /* tmp-- */ \
- " rol %[delay], %[delay] \n" /* delay *= 2 */ \
- " b 1b \n" /* start over */ \
- " \n" \
- "4: ; --- done --- \n" \
-
-#define SCOND_FAIL_RETRY_VARS \
- ,[delay] "=&r" (delay), [tmp] "=&r" (tmp) \
-
-static inline void arch_spin_lock(arch_spinlock_t *lock)
-{
- unsigned int val;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[slock]] \n"
- " breq %[val], %[LOCKED], 0b \n" /* spin while LOCKED */
- " scond %[LOCKED], [%[slock]] \n" /* acquire */
- " bz 4f \n" /* done */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val)
- SCOND_FAIL_RETRY_VARS
- : [slock] "r" (&(lock->slock)),
- [LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
- : "memory", "cc");
-
- smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_spin_trylock(arch_spinlock_t *lock)
-{
- unsigned int val, got_it = 0;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[slock]] \n"
- " breq %[val], %[LOCKED], 4f \n" /* already LOCKED, just bail */
- " scond %[LOCKED], [%[slock]] \n" /* acquire */
- " bz.d 4f \n"
- " mov.z %[got_it], 1 \n" /* got it */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val),
- [got_it] "+&r" (got_it)
- SCOND_FAIL_RETRY_VARS
- : [slock] "r" (&(lock->slock)),
- [LOCKED] "r" (__ARCH_SPIN_LOCK_LOCKED__)
- : "memory", "cc");
-
- smp_mb();
-
- return got_it;
-}
-
-static inline void arch_spin_unlock(arch_spinlock_t *lock)
-{
- smp_mb();
-
- lock->slock = __ARCH_SPIN_LOCK_UNLOCKED__;
-
- smp_mb();
-}
-
-/*
- * Read-write spinlocks, allowing multiple readers but only one writer.
- * Unfair locking as Writers could be starved indefinitely by Reader(s)
- */
-
-static inline void arch_read_lock(arch_rwlock_t *rw)
-{
- unsigned int val;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- /*
- * zero means writer holds the lock exclusively, deny Reader.
- * Otherwise grant lock to first/subseq reader
- *
- * if (rw->counter > 0) {
- * rw->counter--;
- * ret = 1;
- * }
- */
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brls %[val], %[WR_LOCKED], 0b\n" /* <= 0: spin while write locked */
- " sub %[val], %[val], 1 \n" /* reader lock */
- " scond %[val], [%[rwlock]] \n"
- " bz 4f \n" /* done */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_read_trylock(arch_rwlock_t *rw)
-{
- unsigned int val, got_it = 0;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brls %[val], %[WR_LOCKED], 4f\n" /* <= 0: already write locked, bail */
- " sub %[val], %[val], 1 \n" /* counter-- */
- " scond %[val], [%[rwlock]] \n"
- " bz.d 4f \n"
- " mov.z %[got_it], 1 \n" /* got it */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val),
- [got_it] "+&r" (got_it)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-
- return got_it;
-}
-
-static inline void arch_write_lock(arch_rwlock_t *rw)
-{
- unsigned int val;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- /*
- * If reader(s) hold lock (lock < __ARCH_RW_LOCK_UNLOCKED__),
- * deny writer. Otherwise if unlocked grant to writer
- * Hence the claim that Linux rwlocks are unfair to writers.
- * (can be starved for an indefinite time by readers).
- *
- * if (rw->counter == __ARCH_RW_LOCK_UNLOCKED__) {
- * rw->counter = 0;
- * ret = 1;
- * }
- */
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brne %[val], %[UNLOCKED], 0b \n" /* while !UNLOCKED spin */
- " mov %[val], %[WR_LOCKED] \n"
- " scond %[val], [%[rwlock]] \n"
- " bz 4f \n"
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-}
-
-/* 1 - lock taken successfully */
-static inline int arch_write_trylock(arch_rwlock_t *rw)
-{
- unsigned int val, got_it = 0;
- SCOND_FAIL_RETRY_VAR_DEF;
-
- smp_mb();
-
- __asm__ __volatile__(
- "0: mov %[delay], 1 \n"
- "1: llock %[val], [%[rwlock]] \n"
- " brne %[val], %[UNLOCKED], 4f \n" /* !UNLOCKED, bail */
- " mov %[val], %[WR_LOCKED] \n"
- " scond %[val], [%[rwlock]] \n"
- " bz.d 4f \n"
- " mov.z %[got_it], 1 \n" /* got it */
- " \n"
- SCOND_FAIL_RETRY_ASM
-
- : [val] "=&r" (val),
- [got_it] "+&r" (got_it)
- SCOND_FAIL_RETRY_VARS
- : [rwlock] "r" (&(rw->counter)),
- [UNLOCKED] "ir" (__ARCH_RW_LOCK_UNLOCKED__),
- [WR_LOCKED] "ir" (0)
- : "memory", "cc");
-
- smp_mb();
-
- return got_it;
-}
-
-static inline void arch_read_unlock(arch_rwlock_t *rw)
-{
- unsigned int val;
-
- smp_mb();
-
- /*
- * rw->counter++;
- */
- __asm__ __volatile__(
- "1: llock %[val], [%[rwlock]] \n"
- " add %[val], %[val], 1 \n"
- " scond %[val], [%[rwlock]] \n"
- " bnz 1b \n"
- " \n"
- : [val] "=&r" (val)
- : [rwlock] "r" (&(rw->counter))
- : "memory", "cc");
-
- smp_mb();
-}
-
-static inline void arch_write_unlock(arch_rwlock_t *rw)
-{
- unsigned int val;
-
- smp_mb();
-
- /*
- * rw->counter = __ARCH_RW_LOCK_UNLOCKED__;
- */
- __asm__ __volatile__(
- "1: llock %[val], [%[rwlock]] \n"
- " scond %[UNLOCKED], [%[rwlock]]\n"
- " bnz 1b \n"
- " \n"
- : [val] "=&r" (val)
- : [rwlock] "r" (&(rw->counter)),
- [UNLOCKED] "r" (__ARCH_RW_LOCK_UNLOCKED__)
- : "memory", "cc");
-
- smp_mb();
-}
-
-#undef SCOND_FAIL_RETRY_VAR_DEF
-#undef SCOND_FAIL_RETRY_ASM
-#undef SCOND_FAIL_RETRY_VARS
-
-#endif /* CONFIG_ARC_STAR_9000923308 */
-
#else /* !CONFIG_ARC_HAS_LLSC */
static inline void arch_spin_lock(arch_spinlock_t *lock)
/*
* _TIF_ALLWORK_MASK includes SYSCALL_TRACE, but we don't need it.
- * SYSCALL_TRACE is anways seperately/unconditionally tested right after a
+ * SYSCALL_TRACE is anyway seperately/unconditionally tested right after a
* syscall, so all that reamins to be tested is _TIF_WORK_MASK
*/
#define __kernel_ok (segment_eq(get_fs(), KERNEL_DS))
/*
- * Algorthmically, for __user_ok() we want do:
+ * Algorithmically, for __user_ok() we want do:
* (start < TASK_SIZE) && (start+len < TASK_SIZE)
* where TASK_SIZE could either be retrieved from thread_info->addr_limit or
* emitted directly in code.
__tmp ^ __in; \
})
-#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bwap instruction */
+#elif (ARC_BSWAP_TYPE == 2) /* Custom single cycle bswap instruction */
#define __arch_swab32(x) \
({ \
VECTOR instr_service ; 0x10, Instrn Error (0x2)
; ******************** Device ISRs **********************
-#ifdef CONFIG_ARC_IRQ3_LV2
-VECTOR handle_interrupt_level2
-#else
-VECTOR handle_interrupt_level1
-#endif
-
-VECTOR handle_interrupt_level1
-
-#ifdef CONFIG_ARC_IRQ5_LV2
-VECTOR handle_interrupt_level2
-#else
-VECTOR handle_interrupt_level1
-#endif
-
-#ifdef CONFIG_ARC_IRQ6_LV2
+#ifdef CONFIG_ARC_COMPACT_IRQ_LEVELS
VECTOR handle_interrupt_level2
#else
VECTOR handle_interrupt_level1
#endif
-.rept 25
+.rept 28
VECTOR handle_interrupt_level1 ; Other devices
.endr
{
int level_mask = 0;
- /* setup any high priority Interrupts (Level2 in ARCompact jargon) */
- level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3;
- level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5;
- level_mask |= IS_ENABLED(CONFIG_ARC_IRQ6_LV2) << 6;
+ /* Is timer high priority Interrupt (Level2 in ARCompact jargon) */
+ level_mask |= IS_ENABLED(CONFIG_ARC_COMPACT_IRQ_LEVELS) << TIMER0_IRQ;
/*
* Write to register, even if no LV2 IRQs configured to reset it
int64_t delta = new_raw_count - prev_raw_count;
/*
- * We don't afaraid of hwc->prev_count changing beneath our feet
+ * We aren't afraid of hwc->prev_count changing beneath our feet
* because there's no way for us to re-enter this function anytime.
*/
local64_set(&hwc->prev_count, new_raw_count);
/*
* If we are here, it is established that @uboot_arg didn't
* point to DT blob. Instead if u-boot says it is cmdline,
- * Appent to embedded DT cmdline.
+ * append to embedded DT cmdline.
* setup_machine_fdt() would have populated @boot_command_line
*/
if (uboot_tag == 1) {
* -ViXS were still seeing crashes when using insmod to load drivers.
* It turned out that the code to change Execute permssions for TLB entries
* of user was not guarded for interrupts (mod_tlb_permission)
- * This was cauing TLB entries to be overwritten on unrelated indexes
+ * This was causing TLB entries to be overwritten on unrelated indexes
*
* Vineetg: July 15th 2008: Bug #94183
* -Exception happens in Delay slot of a JMP, and before user space resumes,
return 0;
}
-/* called on user read(): display the couters */
+/* called on user read(): display the counters */
static ssize_t tlb_stats_output(struct file *file, /* file descriptor */
char __user *user_buf, /* user buffer */
size_t len, /* length of buffer */
* ------------------
* This ver of MMU supports variable page sizes (1k-16k): although Linux will
* only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggrevate aliasing
+ * However from hardware perspective, smaller page sizes aggravate aliasing
* meaning more vaddr bits needed to disambiguate the cache-line-op ;
* the existing scheme of piggybacking won't work for certain configurations.
* Two new registers IC_PTAG and DC_PTAG inttoduced.
/*
* This is technically for MMU v4, using the MMU v3 programming model
- * Special work for HS38 aliasing I-cache configuratino with PAE40
+ * Special work for HS38 aliasing I-cache configuration with PAE40
* - upper 8 bits of paddr need to be written into PTAG_HI
* - (and needs to be written before the lower 32 bits)
* Note that PTAG_HI is hoisted outside the line loop
ic->ver, CONFIG_ARC_MMU_VER);
/*
- * In MMU v4 (HS38x) the alising icache config uses IVIL/PTAG
+ * In MMU v4 (HS38x) the aliasing icache config uses IVIL/PTAG
* pair to provide vaddr/paddr respectively, just as in MMU v3
*/
if (is_isa_arcv2() && ic->alias)
* DMA Coherent API Notes
*
* I/O is inherently non-coherent on ARC. So a coherent DMA buffer is
- * implemented by accessintg it using a kernel virtual address, with
+ * implemented by accessing it using a kernel virtual address, with
* Cache bit off in the TLB entry.
*
* The default DMA address == Phy address which is 0x8000_0000 based.
{
int ret = 0;
struct net_device *old_net_dev;
+ enum ib_gid_type old_gid_type;
/* in rdma_cap_roce_gid_table, this funciton should be protected by a
* sleep-able lock.
}
old_net_dev = table->data_vec[ix].attr.ndev;
+ old_gid_type = table->data_vec[ix].attr.gid_type;
if (old_net_dev && old_net_dev != attr->ndev)
dev_put(old_net_dev);
/* if modify_gid failed, just delete the old gid */
attr = &zattr;
table->data_vec[ix].context = NULL;
}
- if (default_gid)
- table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT;
+
memcpy(&table->data_vec[ix].gid, gid, sizeof(*gid));
memcpy(&table->data_vec[ix].attr, attr, sizeof(*attr));
+ if (default_gid) {
+ table->data_vec[ix].props |= GID_TABLE_ENTRY_DEFAULT;
+ if (action == GID_TABLE_WRITE_ACTION_DEL)
+ table->data_vec[ix].attr.gid_type = old_gid_type;
+ }
if (table->data_vec[ix].attr.ndev &&
table->data_vec[ix].attr.ndev != old_net_dev)
dev_hold(table->data_vec[ix].attr.ndev);
work->cm_event.event = IB_CM_USER_ESTABLISHED;
/* Check if the device started its remove_one */
- spin_lock_irq(&cm.lock);
+ spin_lock_irqsave(&cm.lock, flags);
if (!cm_dev->going_down) {
queue_delayed_work(cm.wq, &work->work, 0);
} else {
kfree(work);
ret = -ENODEV;
}
- spin_unlock_irq(&cm.lock);
+ spin_unlock_irqrestore(&cm.lock, flags);
out:
return ret;
if (err || port_attr->subnet_prefix)
return err;
+ if (rdma_port_get_link_layer(device, port_num) != IB_LINK_LAYER_INFINIBAND)
+ return 0;
+
err = ib_query_gid(device, port_num, 0, &gid, NULL);
if (err)
return err;
goto err_mad;
}
- if (ib_add_ibnl_clients()) {
+ ret = ib_add_ibnl_clients();
+ if (ret) {
pr_warn("Couldn't register ibnl clients\n");
goto err_sa;
}
if (!nlmsg_request) {
pr_info("%s: Could not find a matching request (seq = %u)\n",
__func__, msg_seq);
- return -EINVAL;
+ return -EINVAL;
}
pm_msg = nlmsg_request->req_buffer;
local_sockaddr = (struct sockaddr_storage *)
/* Now, check to see if there are any methods still in use */
if (!check_method_table(method)) {
/* If not, release management method table */
- kfree(method);
- class->method_table[mgmt_class] = NULL;
- /* Any management classes left ? */
+ kfree(method);
+ class->method_table[mgmt_class] = NULL;
+ /* Any management classes left ? */
if (!check_class_table(class)) {
/* If not, release management class table */
kfree(class);
static void setup_hw_stats(struct ib_device *device, struct ib_port *port,
u8 port_num)
{
- struct attribute_group *hsag = NULL;
+ struct attribute_group *hsag;
struct rdma_hw_stats *stats;
- int i = 0, ret;
+ int i, ret;
stats = device->alloc_hw_stats(device, port_num);
return;
if (!stats->names || stats->num_counters <= 0)
- goto err;
+ goto err_free_stats;
+ /*
+ * Two extra attribue elements here, one for the lifespan entry and
+ * one to NULL terminate the list for the sysfs core code
+ */
hsag = kzalloc(sizeof(*hsag) +
- // 1 extra for the lifespan config entry
- sizeof(void *) * (stats->num_counters + 1),
+ sizeof(void *) * (stats->num_counters + 2),
GFP_KERNEL);
if (!hsag)
- return;
+ goto err_free_stats;
ret = device->get_hw_stats(device, stats, port_num,
stats->num_counters);
if (ret != stats->num_counters)
- goto err;
+ goto err_free_hsag;
stats->timestamp = jiffies;
hsag->attrs[i] = alloc_hsa(i, port_num, stats->names[i]);
if (!hsag->attrs[i])
goto err;
+ sysfs_attr_init(hsag->attrs[i]);
}
/* treat an error here as non-fatal */
hsag->attrs[i] = alloc_hsa_lifespan("lifespan", port_num);
+ if (hsag->attrs[i])
+ sysfs_attr_init(hsag->attrs[i]);
if (port) {
struct kobject *kobj = &port->kobj;
return;
err:
- kfree(stats);
for (; i >= 0; i--)
kfree(hsag->attrs[i]);
+err_free_hsag:
kfree(hsag);
+err_free_stats:
+ kfree(stats);
return;
}
const struct cpumask *node_mask,
*proc_mask = tsk_cpus_allowed(current);
struct cpu_mask_set *set = &dd->affinity->proc;
- char buf[1024];
/*
* check whether process/context affinity has already
* been set
*/
if (cpumask_weight(proc_mask) == 1) {
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(proc_mask));
- hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %s",
- current->pid, current->comm, buf);
+ hfi1_cdbg(PROC, "PID %u %s affinity set to CPU %*pbl",
+ current->pid, current->comm,
+ cpumask_pr_args(proc_mask));
/*
* Mark the pre-set CPU as used. This is atomic so we don't
* need the lock
cpumask_set_cpu(cpu, &set->used);
goto done;
} else if (cpumask_weight(proc_mask) < cpumask_weight(&set->mask)) {
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(proc_mask));
- hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %s",
- current->pid, current->comm, buf);
+ hfi1_cdbg(PROC, "PID %u %s affinity set to CPU set(s) %*pbl",
+ current->pid, current->comm,
+ cpumask_pr_args(proc_mask));
goto done;
}
cpumask_or(intrs, intrs, (dd->affinity->rcv_intr.gen ?
&dd->affinity->rcv_intr.mask :
&dd->affinity->rcv_intr.used));
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(intrs));
- hfi1_cdbg(PROC, "CPUs used by interrupts: %s", buf);
+ hfi1_cdbg(PROC, "CPUs used by interrupts: %*pbl",
+ cpumask_pr_args(intrs));
/*
* If we don't have a NUMA node requested, preference is towards
if (node == -1)
node = dd->node;
node_mask = cpumask_of_node(node);
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(node_mask));
- hfi1_cdbg(PROC, "device on NUMA %u, CPUs %s", node, buf);
+ hfi1_cdbg(PROC, "device on NUMA %u, CPUs %*pbl", node,
+ cpumask_pr_args(node_mask));
/* diff will hold all unused cpus */
cpumask_andnot(diff, &set->mask, &set->used);
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(diff));
- hfi1_cdbg(PROC, "unused CPUs (all) %s", buf);
+ hfi1_cdbg(PROC, "unused CPUs (all) %*pbl", cpumask_pr_args(diff));
/* get cpumask of available CPUs on preferred NUMA */
cpumask_and(mask, diff, node_mask);
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(mask));
- hfi1_cdbg(PROC, "available cpus on NUMA %s", buf);
+ hfi1_cdbg(PROC, "available cpus on NUMA %*pbl", cpumask_pr_args(mask));
/*
* At first, we don't want to place processes on the same
cpumask_andnot(diff, &set->mask, &set->used);
cpumask_andnot(mask, diff, node_mask);
}
- scnprintf(buf, 1024, "%*pbl", cpumask_pr_args(mask));
- hfi1_cdbg(PROC, "possible CPUs for process %s", buf);
+ hfi1_cdbg(PROC, "possible CPUs for process %*pbl",
+ cpumask_pr_args(mask));
cpu = cpumask_first(mask);
if (cpu >= nr_cpu_ids) /* empty */
* save first 2 flits in the packet that caused
* the error
*/
- dd->err_info_rcvport.packet_flit1 = hdr0;
- dd->err_info_rcvport.packet_flit2 = hdr1;
+ dd->err_info_rcvport.packet_flit1 = hdr0;
+ dd->err_info_rcvport.packet_flit2 = hdr1;
}
switch (info) {
case 1:
hfi1_cdbg(CNTR, "[%d] No update necessary", dd->unit);
}
-mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
+ mod_timer(&dd->synth_stats_timer, jiffies + HZ * SYNTH_CNT_TIME);
}
#define C_MAX_NAME 13 /* 12 chars + one for /0 */
dma_free_coherent(&dd->pcidev->dev, sizeof(u64),
(void *)dd->rcvhdrtail_dummy_kvaddr,
dd->rcvhdrtail_dummy_physaddr);
- dd->rcvhdrtail_dummy_kvaddr = NULL;
+ dd->rcvhdrtail_dummy_kvaddr = NULL;
}
for (ctxt = 0; tmp && ctxt < dd->num_rcv_contexts; ctxt++) {
return ret;
}
-const char *print_u64_array(
- struct trace_seq *p,
- u64 *arr, int len)
-{
- int i;
- const char *ret = trace_seq_buffer_ptr(p);
-
- for (i = 0; i < len; i++)
- trace_seq_printf(p, "%s0x%016llx", i == 0 ? "" : " ", arr[i]);
- trace_seq_putc(p, 0);
- return ret;
-}
-
__hfi1_trace_fn(PKT);
__hfi1_trace_fn(PROC);
__hfi1_trace_fn(SDMA);
struct sdma_mmu_node *node;
};
-#define SDMA_CACHE_NODE_EVICT BIT(0)
+#define SDMA_CACHE_NODE_EVICT 0
struct sdma_mmu_node {
struct mmu_rb_node rb;
*/
SDMA_DBG(req, "TID offset %ubytes %uunits om%u",
req->tidoffset, req->tidoffset / req->omfactor,
- !!(req->omfactor - KDETH_OM_SMALL));
+ req->omfactor != KDETH_OM_SMALL);
KDETH_SET(hdr->kdeth.ver_tid_offset, OFFSET,
req->tidoffset / req->omfactor);
KDETH_SET(hdr->kdeth.ver_tid_offset, OM,
- !!(req->omfactor - KDETH_OM_SMALL));
+ req->omfactor != KDETH_OM_SMALL);
}
done:
trace_hfi1_sdma_user_header(pq->dd, pq->ctxt, pq->subctxt,
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2B;
else
props->device_cap_flags |= IB_DEVICE_MEM_WINDOW_TYPE_2A;
- if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
- props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
}
+ if (dev->steering_support == MLX4_STEERING_MODE_DEVICE_MANAGED)
+ props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
props->device_cap_flags |= IB_DEVICE_RAW_IP_CSUM;
int eqn;
int err;
- if (entries < 0)
+ if (entries < 0 ||
+ (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz))))
return ERR_PTR(-EINVAL);
if (check_cq_create_flags(attr->flags))
return -ENOSYS;
}
- if (entries < 1)
+ if (entries < 1 ||
+ entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz))) {
+ mlx5_ib_warn(dev, "wrong entries number %d, max %d\n",
+ entries,
+ 1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz));
return -EINVAL;
+ }
entries = roundup_pow_of_two(entries + 1);
- if (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)) + 1)
+ if (entries > (1 << MLX5_CAP_GEN(dev->mdev, log_max_cq_sz)) + 1)
return -EINVAL;
if (entries == ibcq->cqe + 1)
MLX5_CAP_ETH(dev->mdev, scatter_fcs))
props->device_cap_flags |= IB_DEVICE_RAW_SCATTER_FCS;
+ if (mlx5_get_flow_namespace(dev->mdev, MLX5_FLOW_NAMESPACE_BYPASS))
+ props->device_cap_flags |= IB_DEVICE_MANAGED_FLOW_STEERING;
+
props->vendor_part_id = mdev->pdev->device;
props->hw_ver = mdev->pdev->revision;
num_uars = req.total_num_uuars / MLX5_NON_FP_BF_REGS_PER_PAGE;
gross_uuars = num_uars * MLX5_BF_REGS_PER_PAGE;
resp.qp_tab_size = 1 << MLX5_CAP_GEN(dev->mdev, log_max_qp);
- resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size);
+ if (mlx5_core_is_pf(dev->mdev) && MLX5_CAP_GEN(dev->mdev, bf))
+ resp.bf_reg_size = 1 << MLX5_CAP_GEN(dev->mdev, log_bf_reg_size);
resp.cache_line_size = L1_CACHE_BYTES;
resp.max_sq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_sq);
resp.max_rq_desc_sz = MLX5_CAP_GEN(dev->mdev, max_wqe_sz_rq);
if (field_avail(typeof(resp), cqe_version, udata->outlen))
resp.response_length += sizeof(resp.cqe_version);
- if (field_avail(typeof(resp), hca_core_clock_offset, udata->outlen)) {
+ /*
+ * We don't want to expose information from the PCI bar that is located
+ * after 4096 bytes, so if the arch only supports larger pages, let's
+ * pretend we don't support reading the HCA's core clock. This is also
+ * forced by mmap function.
+ */
+ if (PAGE_SIZE <= 4096 &&
+ field_avail(typeof(resp), hca_core_clock_offset, udata->outlen)) {
resp.comp_mask |=
MLX5_IB_ALLOC_UCONTEXT_RESP_MASK_CORE_CLOCK_OFFSET;
resp.hca_core_clock_offset =
{
struct mlx5_ib_dev *dev =
container_of(device, struct mlx5_ib_dev, ib_dev.dev);
- return sprintf(buf, "%d.%d.%d\n", fw_rev_maj(dev->mdev),
+ return sprintf(buf, "%d.%d.%04d\n", fw_rev_maj(dev->mdev),
fw_rev_min(dev->mdev), fw_rev_sub(dev->mdev));
}
break;
case MLX5_DEV_EVENT_PORT_DOWN:
+ case MLX5_DEV_EVENT_PORT_INITIALIZED:
ibev.event = IB_EVENT_PORT_ERR;
port = (u8)param;
break;
- case MLX5_DEV_EVENT_PORT_INITIALIZED:
- /* not used by ULPs */
- return;
-
case MLX5_DEV_EVENT_LID_CHANGE:
ibev.event = IB_EVENT_LID_CHANGE;
port = (u8)param;
qp->rq.max_gs = 0;
qp->rq.wqe_cnt = 0;
qp->rq.wqe_shift = 0;
+ cap->max_recv_wr = 0;
+ cap->max_recv_sge = 0;
} else {
if (ucmd) {
qp->rq.wqe_cnt = ucmd->rq_wqe_count;
static int mlx5_set_path(struct mlx5_ib_dev *dev, struct mlx5_ib_qp *qp,
const struct ib_ah_attr *ah,
struct mlx5_qp_path *path, u8 port, int attr_mask,
- u32 path_flags, const struct ib_qp_attr *attr)
+ u32 path_flags, const struct ib_qp_attr *attr,
+ bool alt)
{
enum rdma_link_layer ll = rdma_port_get_link_layer(&dev->ib_dev, port);
int err;
if (attr_mask & IB_QP_PKEY_INDEX)
- path->pkey_index = attr->pkey_index;
+ path->pkey_index = cpu_to_be16(alt ? attr->alt_pkey_index :
+ attr->pkey_index);
if (ah->ah_flags & IB_AH_GRH) {
if (ah->grh.sgid_index >=
ah->grh.sgid_index);
path->dci_cfi_prio_sl = (ah->sl & 0x7) << 4;
} else {
- path->fl = (path_flags & MLX5_PATH_FLAG_FL) ? 0x80 : 0;
- path->free_ar = (path_flags & MLX5_PATH_FLAG_FREE_AR) ? 0x80 :
- 0;
+ path->fl_free_ar = (path_flags & MLX5_PATH_FLAG_FL) ? 0x80 : 0;
+ path->fl_free_ar |=
+ (path_flags & MLX5_PATH_FLAG_FREE_AR) ? 0x40 : 0;
path->rlid = cpu_to_be16(ah->dlid);
path->grh_mlid = ah->src_path_bits & 0x7f;
if (ah->ah_flags & IB_AH_GRH)
path->port = port;
if (attr_mask & IB_QP_TIMEOUT)
- path->ackto_lt = attr->timeout << 3;
+ path->ackto_lt = (alt ? attr->alt_timeout : attr->timeout) << 3;
if ((qp->ibqp.qp_type == IB_QPT_RAW_PACKET) && qp->sq.wqe_cnt)
return modify_raw_packet_eth_prio(dev->mdev,
context->log_pg_sz_remote_qpn = cpu_to_be32(attr->dest_qp_num);
if (attr_mask & IB_QP_PKEY_INDEX)
- context->pri_path.pkey_index = attr->pkey_index;
+ context->pri_path.pkey_index = cpu_to_be16(attr->pkey_index);
/* todo implement counter_index functionality */
if (attr_mask & IB_QP_AV) {
err = mlx5_set_path(dev, qp, &attr->ah_attr, &context->pri_path,
attr_mask & IB_QP_PORT ? attr->port_num : qp->port,
- attr_mask, 0, attr);
+ attr_mask, 0, attr, false);
if (err)
goto out;
}
if (attr_mask & IB_QP_ALT_PATH) {
err = mlx5_set_path(dev, qp, &attr->alt_ah_attr,
&context->alt_path,
- attr->alt_port_num, attr_mask, 0, attr);
+ attr->alt_port_num,
+ attr_mask | IB_QP_PKEY_INDEX | IB_QP_TIMEOUT,
+ 0, attr, true);
if (err)
goto out;
}
if (qp->ibqp.qp_type == IB_QPT_RC || qp->ibqp.qp_type == IB_QPT_UC) {
to_ib_ah_attr(dev, &qp_attr->ah_attr, &context->pri_path);
to_ib_ah_attr(dev, &qp_attr->alt_ah_attr, &context->alt_path);
- qp_attr->alt_pkey_index = context->alt_path.pkey_index & 0x7f;
+ qp_attr->alt_pkey_index =
+ be16_to_cpu(context->alt_path.pkey_index);
qp_attr->alt_port_num = qp_attr->alt_ah_attr.port_num;
}
- qp_attr->pkey_index = context->pri_path.pkey_index & 0x7f;
+ qp_attr->pkey_index = be16_to_cpu(context->pri_path.pkey_index);
qp_attr->port_num = context->pri_path.port;
/* qp_attr->en_sqd_async_notify is only applicable in modify qp */
qp_attr->cap.max_recv_sge = qp->rq.max_gs;
if (!ibqp->uobject) {
- qp_attr->cap.max_send_wr = qp->sq.wqe_cnt;
+ qp_attr->cap.max_send_wr = qp->sq.max_post;
qp_attr->cap.max_send_sge = qp->sq.max_gs;
+ qp_init_attr->qp_context = ibqp->qp_context;
} else {
qp_attr->cap.max_send_wr = 0;
qp_attr->cap.max_send_sge = 0;
}
- /* We don't support inline sends for kernel QPs (yet), and we
- * don't know what userspace's value should be.
- */
- qp_attr->cap.max_inline_data = 0;
+ qp_init_attr->qp_type = ibqp->qp_type;
+ qp_init_attr->recv_cq = ibqp->recv_cq;
+ qp_init_attr->send_cq = ibqp->send_cq;
+ qp_init_attr->srq = ibqp->srq;
+ qp_attr->cap.max_inline_data = qp->max_inline_data;
qp_init_attr->cap = qp_attr->cap;
#include <linux/dma-mapping.h>
#include <linux/sched.h>
#include <linux/hugetlb.h>
-#include <linux/dma-attrs.h>
#include <linux/iommu.h>
#include <linux/workqueue.h>
#include <linux/list.h>
int i;
int flags;
dma_addr_t pa;
- DEFINE_DMA_ATTRS(attrs);
-
- if (dmasync)
- dma_set_attr(DMA_ATTR_WRITE_BARRIER, &attrs);
if (!can_do_mlock())
return -EPERM;
*/
static void rvt_reset_qp(struct rvt_dev_info *rdi, struct rvt_qp *qp,
enum ib_qp_type type)
+ __releases(&qp->s_lock)
+ __releases(&qp->s_hlock)
+ __releases(&qp->r_lock)
+ __acquires(&qp->r_lock)
+ __acquires(&qp->s_hlock)
+ __acquires(&qp->s_lock)
{
if (qp->state != IB_QPS_RESET) {
qp->state = IB_QPS_RESET;
IPOIB_NEIGH_TBL_FLUSH = 12,
IPOIB_FLAG_DEV_ADDR_SET = 13,
IPOIB_FLAG_DEV_ADDR_CTRL = 14,
+ IPOIB_FLAG_GOING_DOWN = 15,
IPOIB_MAX_BACKOFF_SECONDS = 16,
{
struct net_device *dev = to_net_dev(d);
int ret;
+ struct ipoib_dev_priv *priv = netdev_priv(dev);
+
+ if (test_bit(IPOIB_FLAG_GOING_DOWN, &priv->flags))
+ return -EPERM;
if (!rtnl_trylock())
return restart_syscall();
if (ib_query_gid(priv->ca, priv->port, 0, &gid0, NULL))
return false;
- netif_addr_lock(priv->dev);
+ netif_addr_lock_bh(priv->dev);
/* The subnet prefix may have changed, update it now so we won't have
* to do it later
search_gid.global.interface_id = priv->local_gid.global.interface_id;
- netif_addr_unlock(priv->dev);
+ netif_addr_unlock_bh(priv->dev);
err = ib_find_gid(priv->ca, &search_gid, IB_GID_TYPE_IB,
priv->dev, &port, &index);
- netif_addr_lock(priv->dev);
+ netif_addr_lock_bh(priv->dev);
if (search_gid.global.interface_id !=
priv->local_gid.global.interface_id)
}
out:
- netif_addr_unlock(priv->dev);
+ netif_addr_unlock_bh(priv->dev);
return ret;
}
neigh = NULL;
goto out_unlock;
}
- neigh->alive = jiffies;
+
+ if (likely(skb_queue_len(&neigh->queue) < IPOIB_MAX_PATH_REC_QUEUE))
+ neigh->alive = jiffies;
goto out_unlock;
}
}
struct ipoib_dev_priv *child_priv;
struct net_device *netdev = priv->dev;
- netif_addr_lock(netdev);
+ netif_addr_lock_bh(netdev);
memcpy(&priv->local_gid.global.interface_id,
&gid->global.interface_id,
memcpy(netdev->dev_addr + 4, &priv->local_gid, sizeof(priv->local_gid));
clear_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags);
- netif_addr_unlock(netdev);
+ netif_addr_unlock_bh(netdev);
if (!test_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags)) {
down_read(&priv->vlan_rwsem);
union ib_gid *gid = (union ib_gid *)(ss->__data + 4);
int ret = 0;
- netif_addr_lock(dev);
+ netif_addr_lock_bh(dev);
/* Make sure the QPN, reserved and subnet prefix match the current
* lladdr, it also makes sure the lladdr is unicast.
gid->global.interface_id == 0)
ret = -EINVAL;
- netif_addr_unlock(dev);
+ netif_addr_unlock_bh(dev);
return ret;
}
ib_unregister_event_handler(&priv->event_handler);
flush_workqueue(ipoib_workqueue);
+ /* mark interface in the middle of destruction */
+ set_bit(IPOIB_FLAG_GOING_DOWN, &priv->flags);
+
rtnl_lock();
dev_change_flags(priv->dev, priv->dev->flags & ~IFF_UP);
rtnl_unlock();
return;
}
priv->local_lid = port_attr.lid;
- netif_addr_lock(dev);
+ netif_addr_lock_bh(dev);
if (!test_bit(IPOIB_FLAG_DEV_ADDR_SET, &priv->flags)) {
- netif_addr_unlock(dev);
+ netif_addr_unlock_bh(dev);
return;
}
- netif_addr_unlock(dev);
+ netif_addr_unlock_bh(dev);
spin_lock_irq(&priv->lock);
if (!test_bit(IPOIB_FLAG_OPER_UP, &priv->flags))
ppriv = netdev_priv(pdev);
+ if (test_bit(IPOIB_FLAG_GOING_DOWN, &ppriv->flags))
+ return -EPERM;
+
snprintf(intf_name, sizeof intf_name, "%s.%04x",
ppriv->dev->name, pkey);
priv = ipoib_intf_alloc(intf_name);
ppriv = netdev_priv(pdev);
+ if (test_bit(IPOIB_FLAG_GOING_DOWN, &ppriv->flags))
+ return -EPERM;
+
if (!rtnl_trylock())
return restart_syscall();
{
unsigned int sg_offset = 0;
- state->desc = req->indirect_desc;
state->fr.next = req->fr_list;
state->fr.end = req->fr_list + ch->target->mr_per_cmd;
state->sg = scat;
struct scatterlist *sg;
int i;
- state->desc = req->indirect_desc;
for_each_sg(scat, sg, count, i) {
srp_map_desc(state, ib_sg_dma_address(dev->dev, sg),
ib_sg_dma_len(dev->dev, sg),
target->indirect_size, DMA_TO_DEVICE);
memset(&state, 0, sizeof(state));
+ state.desc = req->indirect_desc;
if (dev->use_fast_reg)
ret = srp_map_sg_fr(&state, ch, req, scat, count);
else if (dev->use_fmr)
int mr_page_shift, p;
u64 max_pages_per_mr;
- srp_dev = kmalloc(sizeof *srp_dev, GFP_KERNEL);
+ srp_dev = kzalloc(sizeof(*srp_dev), GFP_KERNEL);
if (!srp_dev)
return;
IB_ACCESS_REMOTE_WRITE);
if (IS_ERR(srp_dev->global_mr))
goto err_pd;
- } else {
- srp_dev->global_mr = NULL;
}
for (p = rdma_start_port(device); p <= rdma_end_port(device); ++p) {
};
struct mlx5_qp_path {
- u8 fl;
+ u8 fl_free_ar;
u8 rsvd3;
- u8 free_ar;
- u8 pkey_index;
+ __be16 pkey_index;
u8 rsvd0;
u8 grh_mlid;
__be16 rlid;
IB_DEVICE_CROSS_CHANNEL = (1 << 27),
IB_DEVICE_MANAGED_FLOW_STEERING = (1 << 29),
IB_DEVICE_SIGNATURE_HANDOVER = (1 << 30),
- IB_DEVICE_ON_DEMAND_PAGING = (1 << 31),
+ IB_DEVICE_ON_DEMAND_PAGING = (1ULL << 31),
IB_DEVICE_SG_GAPS_REG = (1ULL << 32),
- IB_DEVICE_VIRTUAL_FUNCTION = ((u64)1 << 33),
- IB_DEVICE_RAW_SCATTER_FCS = ((u64)1 << 34),
+ IB_DEVICE_VIRTUAL_FUNCTION = (1ULL << 33),
+ IB_DEVICE_RAW_SCATTER_FCS = (1ULL << 34),
};
enum ib_signature_prot_cap {