]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
regulator: lp873x: Add support for lp873x PMIC regulators
authorKeerthy <j-keerthy@ti.com>
Tue, 10 May 2016 04:04:39 +0000 (09:34 +0530)
committerMark Brown <broonie@kernel.org>
Wed, 11 May 2016 16:53:08 +0000 (17:53 +0100)
The regulators set consists of 2 BUCKs and 2 LDOs. The output
voltages are configurable and are meant to supply power to the
main processor and other components. The ramp delay is configurable
for both BUCKs.

Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
drivers/regulator/Kconfig
drivers/regulator/Makefile
drivers/regulator/lp873x-regulator.c [new file with mode: 0644]

index c77dc08b1202c1077c72e082deadee3f2f9782d5..4d2d737f8c7ed7904d82864d0228ec020dd3ff30 100644 (file)
@@ -321,6 +321,15 @@ config REGULATOR_LP872X
        help
          This driver supports LP8720/LP8725 PMIC
 
+config REGULATOR_LP873X
+       tristate "TI LP873X Power regulators"
+       depends on MFD_LP873X && OF
+       help
+         This driver supports LP873X voltage regulator chips. LP873X
+         provides two step-down converters and two general-purpose LDO
+         voltage regulators. It supports software based voltage control
+         for different voltage domains
+
 config REGULATOR_LP8755
        tristate "TI LP8755 High Performance PMU driver"
        depends on I2C
index 61bfbb9d4a0c9fe8724fb0a0aad0cafd7d08176c..7182b5f7c3e7cffc08edf2dbb1e79d8cb93dfb96 100644 (file)
@@ -42,6 +42,7 @@ obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
+obj-$(CONFIG_REGULATOR_LP873X) += lp873x-regulator.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
 obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
 obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
new file mode 100644 (file)
index 0000000..b4ffd11
--- /dev/null
@@ -0,0 +1,241 @@
+/*
+ * Regulator driver for LP873X PMIC
+ *
+ * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether expressed or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License version 2 for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <linux/mfd/lp873x.h>
+
+#define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
+                        _delay, _lr, _nlr, _cr)                        \
+       [_id] = {                                                       \
+               .desc = {                                               \
+                       .name                   = _name,                \
+                       .id                     = _id,                  \
+                       .of_match               = of_match_ptr(_of),    \
+                       .regulators_node        = of_match_ptr("regulators"),\
+                       .ops                    = &_ops,                \
+                       .n_voltages             = _n,                   \
+                       .type                   = REGULATOR_VOLTAGE,    \
+                       .owner                  = THIS_MODULE,          \
+                       .vsel_reg               = _vr,                  \
+                       .vsel_mask              = _vm,                  \
+                       .enable_reg             = _er,                  \
+                       .enable_mask            = _em,                  \
+                       .ramp_delay             = _delay,               \
+                       .linear_ranges          = _lr,                  \
+                       .n_linear_ranges        = _nlr,                 \
+               },                                                      \
+               .ctrl2_reg = _cr,                                       \
+       }
+
+struct lp873x_regulator {
+       struct regulator_desc desc;
+       unsigned int ctrl2_reg;
+};
+
+static const struct lp873x_regulator regulators[];
+
+static const struct regulator_linear_range buck0_buck1_ranges[] = {
+       REGULATOR_LINEAR_RANGE(0, 0x0, 0x13, 0),
+       REGULATOR_LINEAR_RANGE(700000, 0x14, 0x17, 10000),
+       REGULATOR_LINEAR_RANGE(735000, 0x18, 0x9d, 5000),
+       REGULATOR_LINEAR_RANGE(1420000, 0x9e, 0xff, 20000),
+};
+
+static const struct regulator_linear_range ldo0_ldo1_ranges[] = {
+       REGULATOR_LINEAR_RANGE(800000, 0x0, 0x19, 100000),
+};
+
+static unsigned int lp873x_buck_ramp_delay[] = {
+       30000, 15000, 10000, 7500, 3800, 1900, 940, 470
+};
+
+/* LP873X BUCK current limit */
+static const unsigned int lp873x_buck_uA[] = {
+       1500000, 2000000, 2500000, 3000000, 3500000, 4000000,
+};
+
+static int lp873x_buck_set_ramp_delay(struct regulator_dev *rdev,
+                                     int ramp_delay)
+{
+       int id = rdev_get_id(rdev);
+       struct lp873x *lp873 = rdev_get_drvdata(rdev);
+       unsigned int reg;
+       int ret;
+
+       if (ramp_delay <= 470)
+               reg = 7;
+       else if (ramp_delay <= 940)
+               reg = 6;
+       else if (ramp_delay <= 1900)
+               reg = 5;
+       else if (ramp_delay <= 3800)
+               reg = 4;
+       else if (ramp_delay <= 7500)
+               reg = 3;
+       else if (ramp_delay <= 10000)
+               reg = 2;
+       else if (ramp_delay <= 15000)
+               reg = 1;
+       else
+               reg = 0;
+
+       ret = regmap_update_bits(lp873->regmap, regulators[id].ctrl2_reg,
+                                LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE,
+                                reg << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE));
+       if (ret) {
+               dev_err(lp873->dev, "SLEW RATE write failed: %d\n", ret);
+               return ret;
+       }
+
+       rdev->constraints->ramp_delay = lp873x_buck_ramp_delay[reg];
+
+       return 0;
+}
+
+static int lp873x_buck_set_current_limit(struct regulator_dev *rdev,
+                                        int min_uA, int max_uA)
+{
+       int id = rdev_get_id(rdev);
+       struct lp873x *lp873 = rdev_get_drvdata(rdev);
+       int i;
+
+       for (i = ARRAY_SIZE(lp873x_buck_uA) - 1; i >= 0; i--) {
+               if (lp873x_buck_uA[i] >= min_uA &&
+                   lp873x_buck_uA[i] <= max_uA)
+                       return regmap_update_bits(lp873->regmap,
+                                                 regulators[id].ctrl2_reg,
+                                                 LP873X_BUCK0_CTRL_2_BUCK0_ILIM,
+                                                 i << __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM));
+       }
+
+       return -EINVAL;
+}
+
+static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
+{
+       int id = rdev_get_id(rdev);
+       struct lp873x *lp873 = rdev_get_drvdata(rdev);
+       int ret;
+       unsigned int val;
+
+       ret = regmap_read(lp873->regmap, regulators[id].ctrl2_reg, &val);
+       if (ret)
+               return ret;
+
+       val = (val & LP873X_BUCK0_CTRL_2_BUCK0_ILIM) >>
+              __ffs(LP873X_BUCK0_CTRL_2_BUCK0_ILIM);
+
+       return (val < ARRAY_SIZE(lp873x_buck_uA)) ?
+                       lp873x_buck_uA[val] : -EINVAL;
+}
+
+/* Operations permitted on BUCK0, BUCK1 */
+static struct regulator_ops lp873x_buck01_ops = {
+       .is_enabled             = regulator_is_enabled_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .list_voltage           = regulator_list_voltage_linear_range,
+       .map_voltage            = regulator_map_voltage_linear_range,
+       .set_voltage_time_sel   = regulator_set_voltage_time_sel,
+       .set_ramp_delay         = lp873x_buck_set_ramp_delay,
+       .set_current_limit      = lp873x_buck_set_current_limit,
+       .get_current_limit      = lp873x_buck_get_current_limit,
+};
+
+/* Operations permitted on LDO0 and LDO1 */
+static struct regulator_ops lp873x_ldo01_ops = {
+       .is_enabled             = regulator_is_enabled_regmap,
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+       .list_voltage           = regulator_list_voltage_linear_range,
+       .map_voltage            = regulator_map_voltage_linear_range,
+};
+
+static const struct lp873x_regulator regulators[] = {
+       LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,
+                        256, LP873X_REG_BUCK0_VOUT,
+                        LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
+                        LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
+                        buck0_buck1_ranges, 4, LP873X_REG_BUCK0_CTRL_2),
+       LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
+                        256, LP873X_REG_BUCK1_VOUT,
+                        LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
+                        LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
+                        buck0_buck1_ranges, 4, LP873X_REG_BUCK1_CTRL_2),
+       LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
+                        LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
+                        LP873X_REG_LDO0_CTRL,
+                        LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 1,
+                        0xFF),
+       LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
+                        LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
+                        LP873X_REG_LDO1_CTRL,
+                        LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 1,
+                        0xFF),
+};
+
+static int lp873x_regulator_probe(struct platform_device *pdev)
+{
+       struct lp873x *lp873 = dev_get_drvdata(pdev->dev.parent);
+       struct regulator_config config = { };
+       struct regulator_dev *rdev;
+       int i;
+
+       platform_set_drvdata(pdev, lp873);
+
+       config.dev = &pdev->dev;
+       config.dev->of_node = lp873->dev->of_node;
+       config.driver_data = lp873;
+       config.regmap = lp873->regmap;
+
+       for (i = 0; i < ARRAY_SIZE(regulators); i++) {
+               rdev = devm_regulator_register(&pdev->dev, &regulators[i].desc,
+                                              &config);
+               if (IS_ERR(rdev)) {
+                       dev_err(lp873->dev, "failed to register %s regulator\n",
+                               pdev->name);
+                       return PTR_ERR(rdev);
+               }
+       }
+
+       return 0;
+}
+
+static const struct platform_device_id lp873x_regulator_id_table[] = {
+       { "lp873x-regulator", },
+       { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, lp873x_regulator_id_table);
+
+static struct platform_driver lp873x_regulator_driver = {
+       .driver = {
+               .name = "lp873x-pmic",
+       },
+       .probe = lp873x_regulator_probe,
+       .id_table = lp873x_regulator_id_table,
+};
+module_platform_driver(lp873x_regulator_driver);
+
+MODULE_AUTHOR("J Keerthy <j-keerthy@ti.com>");
+MODULE_DESCRIPTION("LP873X voltage regulator driver");
+MODULE_ALIAS("platform:lp873x-pmic");
+MODULE_LICENSE("GPL v2");