Internal configuration for default SDHCI setup for S3C6400 and
S3C6410 SoCs.
+config S3C64XX_DEV_ONENAND1
+ bool
+ help
+ Compile in platform device definition for OneNAND1 controller
+
# platform specific device setup
config S3C64XX_SETUP_I2C0
obj-y += dev-audio.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
obj-$(CONFIG_S3C64XX_DEV_TS) += dev-ts.o
+obj-$(CONFIG_S3C64XX_DEV_ONENAND1) += dev-onenand1.o
--- /dev/null
+/*
+ * linux/arch/arm/mach-s3c64xx/dev-onenand1.c
+ *
+ * Copyright (c) 2008-2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S3C64XX series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s3c64xx_onenand1_resources[] = {
+ [0] = {
+ .start = S3C64XX_PA_ONENAND1,
+ .end = S3C64XX_PA_ONENAND1 + 0x400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C64XX_PA_ONENAND1_BUF,
+ .end = S3C64XX_PA_ONENAND1_BUF + S3C64XX_SZ_ONENAND1_BUF - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_ONENAND1,
+ .end = IRQ_ONENAND1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c64xx_device_onenand1 = {
+ .name = "samsung-onenand",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(s3c64xx_onenand1_resources),
+ .resource = s3c64xx_onenand1_resources,
+};
+
+void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata)
+{
+ struct onenand_platform_data *pd;
+
+ pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+ if (!pd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ s3c64xx_device_onenand1.dev.platform_data = pd;
+}
#define NR_IRQS (IRQ_BOARD_END + 1)
+/* Compatibility */
+
+#define IRQ_ONENAND IRQ_ONENAND0
+
#endif /* __ASM_MACH_S3C64XX_IRQS_H */
#define S3C64XX_PA_SROM (0x70000000)
+#define S3C64XX_PA_ONENAND0 (0x70100000)
+#define S3C64XX_PA_ONENAND0_BUF (0x20000000)
+#define S3C64XX_SZ_ONENAND0_BUF (SZ_64M)
+
+/* NAND and OneNAND1 controllers occupy the same register region
+ (depending on SoC POP version) */
+#define S3C64XX_PA_ONENAND1 (0x70200000)
+#define S3C64XX_PA_ONENAND1_BUF (0x28000000)
+#define S3C64XX_SZ_ONENAND1_BUF (SZ_64M)
+
#define S3C64XX_PA_NAND (0x70200000)
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_USB_HSOTG (0x7C000000)
#define S3C_PA_IIC S3C64XX_PA_IIC0
#define S3C_PA_IIC1 S3C64XX_PA_IIC1
#define S3C_PA_NAND S3C64XX_PA_NAND
+#define S3C_PA_ONENAND S3C64XX_PA_ONENAND0
+#define S3C_PA_ONENAND_BUF S3C64XX_PA_ONENAND0_BUF
+#define S3C_SZ_ONENAND_BUF S3C64XX_SZ_ONENAND0_BUF
#define S3C_PA_FB S3C64XX_PA_FB
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
void __init s3c6400_map_io(void)
s3c_i2c0_setname("s3c2440-i2c");
s3c_device_nand.name = "s3c6400-nand";
+
+ s3c_onenand_setname("s3c6400-onenand");
+ s3c64xx_onenand1_setname("s3c6400-onenand");
}
void __init s3c6400_init_clocks(int xtal)
#include <plat/sdhci.h>
#include <plat/iic-core.h>
#include <plat/adc.h>
+#include <plat/onenand-core.h>
#include <mach/s3c6400.h>
#include <mach/s3c6410.h>
s3c_device_adc.name = "s3c64xx-adc";
s3c_device_nand.name = "s3c6400-nand";
+ s3c_onenand_setname("s3c6410-onenand");
+ s3c64xx_onenand1_setname("s3c6410-onenand");
}
void __init s3c6410_init_clocks(int xtal)
#include <plat/clock.h>
#include <plat/sdhci.h>
#include <plat/iic-core.h>
+#include <plat/onenand-core.h>
+
#include <plat/s5pc100.h>
/* Initial IO mappings */
/* the i2c devices are directly compatible with s3c2440 */
s3c_i2c0_setname("s3c2440-i2c");
s3c_i2c1_setname("s3c2440-i2c");
+
+ s3c_onenand_setname("s5pc100-onenand");
}
void __init s5pc100_init_clocks(int xtal)
*
*/
+#define S5PC100_PA_ONENAND_BUF (0xB0000000)
+#define S5PC100_SZ_ONENAND_BUF (SZ_256M - SZ_32M)
+
/* Chip ID */
#define S5PC100_PA_CHIPID (0xE0000000)
#define S5PC1XX_PA_CHIPID S5PC100_PA_CHIPID
#define S5PC1XX_PA_VIC(x) (S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
#define S5PC1XX_VA_VIC(x) (S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
+#define S5PC100_PA_ONENAND (0xE7100000)
+
/* DMA */
#define S5PC100_PA_MDMA (0xE8100000)
#define S5PC100_PA_PDMA0 (0xE9000000)
#define S3C_PA_HSMMC2 S5PC100_PA_HSMMC2
#define S3C_PA_KEYPAD S5PC100_PA_KEYPAD
#define S3C_PA_TSADC S5PC100_PA_TSADC
+#define S3C_PA_ONENAND S5PC100_PA_ONENAND
+#define S3C_PA_ONENAND_BUF S5PC100_PA_ONENAND_BUF
+#define S3C_SZ_ONENAND_BUF S5PC100_SZ_ONENAND_BUF
#endif /* __ASM_ARCH_C100_MAP_H */
depends on ARCH_S5PV210
default MACH_SMDKV210
+config S5PC110_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND1 controller
+
config MACH_SMDKV210
bool "SMDKV210"
select CPU_S5PV210
# device support
obj-y += dev-audio.o
+obj-$(CONFIG_S5PC110_DEV_ONENAND) += dev-onenand.o
\ No newline at end of file
--- /dev/null
+/*
+ * linux/arch/arm/mach-s5pv210/dev-onenand.c
+ *
+ * Copyright (c) 2008-2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC110 series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s5pc110_onenand_resources[] = {
+ [0] = {
+ .start = S5PC110_PA_ONENAND,
+ .end = S5PC110_PA_ONENAND + SZ_128K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S5PC110_PA_ONENAND_DMA,
+ .end = S5PC110_PA_ONENAND_DMA + SZ_2K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+struct platform_device s5pc110_device_onenand = {
+ .name = "s5pc110-onenand",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(s5pc110_onenand_resources),
+ .resource = s5pc110_onenand_resources,
+};
+
+void s5pc110_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+ struct onenand_platform_data *pd;
+
+ pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+ if (!pd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ s5pc110_device_onenand.dev.platform_data = pd;
+}
#include <plat/map-base.h>
#include <plat/map-s5p.h>
+#define S5PC110_PA_ONENAND (0xB0000000)
+#define S5PC110_PA_ONENAND_DMA (0xB0600000)
+
#define S5PV210_PA_CHIPID (0xE0000000)
#define S5P_PA_CHIPID S5PV210_PA_CHIPID
help
Compile in platform device definition for NAND controller
+config S3C_DEV_ONENAND
+ bool
+ help
+ Compile in platform device definition for OneNAND controller
+
config S3C_DEV_RTC
bool
help
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
+obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o
obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
--- /dev/null
+/*
+ * linux/arch/arm/plat-samsung/dev-onenand.c
+ *
+ * Copyright (c) 2008-2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S3C64XX/S5PC100 series device definition for OneNAND devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/onenand.h>
+
+#include <mach/irqs.h>
+#include <mach/map.h>
+
+static struct resource s3c_onenand_resources[] = {
+ [0] = {
+ .start = S3C_PA_ONENAND,
+ .end = S3C_PA_ONENAND + 0x400 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = S3C_PA_ONENAND_BUF,
+ .end = S3C_PA_ONENAND_BUF + S3C_SZ_ONENAND_BUF - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = IRQ_ONENAND,
+ .end = IRQ_ONENAND,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device s3c_device_onenand = {
+ .name = "samsung-onenand",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(s3c_onenand_resources),
+ .resource = s3c_onenand_resources,
+};
+
+void s3c_onenand_set_platdata(struct onenand_platform_data *pdata)
+{
+ struct onenand_platform_data *pd;
+
+ pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL);
+ if (!pd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+ s3c_device_onenand.dev.platform_data = pd;
+}
extern struct platform_device s3c_device_hwmon;
extern struct platform_device s3c_device_nand;
+extern struct platform_device s3c_device_onenand;
+extern struct platform_device s3c64xx_device_onenand1;
+extern struct platform_device s5pc110_device_onenand;
extern struct platform_device s3c_device_usbgadget;
extern struct platform_device s3c_device_usb_hsotg;
--- /dev/null
+/*
+ * linux/arch/arm/plat-samsung/onenand-core.h
+ *
+ * Copyright (c) 2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ * Marek Szyprowski <m.szyprowski@samsung.com>
+ *
+ * Samsung OneNAD Controller core functions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_ONENAND_CORE_H
+#define __ASM_ARCH_ONENAND_CORE_H __FILE__
+
+/* These functions are only for use with the core support code, such as
+ * the cpu specific initialisation code
+ */
+
+/* re-define device name depending on support. */
+static inline void s3c_onenand_setname(char *name)
+{
+#ifdef CONFIG_S3C_DEV_ONENAND
+ s3c_device_onenand.name = name;
+#endif
+}
+
+static inline void s3c64xx_onenand1_setname(char *name)
+{
+#ifdef CONFIG_S3C64XX_DEV_ONENAND1
+ s3c64xx_device_onenand1.name = name;
+#endif
+}
+
+#endif /* __ASM_ARCH_ONENAND_CORE_H */
--- /dev/null
+/*
+ * linux/arch/arm/plat-s3c/include/plat/regs-onenand.h
+ *
+ * Copyright (C) 2008-2010 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __SAMSUNG_ONENAND_H__
+#define __SAMSUNG_ONENAND_H__
+
+#include <mach/hardware.h>
+
+/*
+ * OneNAND Controller
+ */
+#define MEM_CFG_OFFSET 0x0000
+#define BURST_LEN_OFFSET 0x0010
+#define MEM_RESET_OFFSET 0x0020
+#define INT_ERR_STAT_OFFSET 0x0030
+#define INT_ERR_MASK_OFFSET 0x0040
+#define INT_ERR_ACK_OFFSET 0x0050
+#define ECC_ERR_STAT_OFFSET 0x0060
+#define MANUFACT_ID_OFFSET 0x0070
+#define DEVICE_ID_OFFSET 0x0080
+#define DATA_BUF_SIZE_OFFSET 0x0090
+#define BOOT_BUF_SIZE_OFFSET 0x00A0
+#define BUF_AMOUNT_OFFSET 0x00B0
+#define TECH_OFFSET 0x00C0
+#define FBA_WIDTH_OFFSET 0x00D0
+#define FPA_WIDTH_OFFSET 0x00E0
+#define FSA_WIDTH_OFFSET 0x00F0
+#define TRANS_SPARE_OFFSET 0x0140
+#define DBS_DFS_WIDTH_OFFSET 0x0160
+#define INT_PIN_ENABLE_OFFSET 0x01A0
+#define ACC_CLOCK_OFFSET 0x01C0
+#define FLASH_VER_ID_OFFSET 0x01F0
+#define FLASH_AUX_CNTRL_OFFSET 0x0300 /* s3c64xx only */
+
+#define ONENAND_MEM_RESET_HOT 0x3
+#define ONENAND_MEM_RESET_COLD 0x2
+#define ONENAND_MEM_RESET_WARM 0x1
+
+#define CACHE_OP_ERR (1 << 13)
+#define RST_CMP (1 << 12)
+#define RDY_ACT (1 << 11)
+#define INT_ACT (1 << 10)
+#define UNSUP_CMD (1 << 9)
+#define LOCKED_BLK (1 << 8)
+#define BLK_RW_CMP (1 << 7)
+#define ERS_CMP (1 << 6)
+#define PGM_CMP (1 << 5)
+#define LOAD_CMP (1 << 4)
+#define ERS_FAIL (1 << 3)
+#define PGM_FAIL (1 << 2)
+#define INT_TO (1 << 1)
+#define LD_FAIL_ECC_ERR (1 << 0)
+
+#define TSRF (1 << 0)
+
+#endif
projects / linux.git / commitdiff