source "drivers/net/wireless/orinoco/Kconfig"
source "drivers/net/wireless/p54/Kconfig"
source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/wl1251/Kconfig"
source "drivers/net/wireless/wl12xx/Kconfig"
source "drivers/net/wireless/zd1211rw/Kconfig"
obj-$(CONFIG_MAC80211_HWSIM) += mac80211_hwsim.o
+obj-$(CONFIG_WL1251) += wl1251/
obj-$(CONFIG_WL12XX) += wl12xx/
obj-$(CONFIG_WL12XX_PLATFORM_DATA) += wl12xx/
--- /dev/null
+menuconfig WL1251
+ tristate "TI wl1251 driver support"
+ depends on MAC80211 && EXPERIMENTAL && GENERIC_HARDIRQS
+ select FW_LOADER
+ select CRC7
+ ---help---
+ This will enable TI wl1251 driver support. The drivers make
+ use of the mac80211 stack.
+
+ If you choose to build a module, it'll be called wl1251. Say
+ N if unsure.
+
+config WL1251_SPI
+ tristate "TI wl1251 SPI support"
+ depends on WL1251 && SPI_MASTER
+ ---help---
+ This module adds support for the SPI interface of adapters using
+ TI wl1251 chipset. Select this if your platform is using
+ the SPI bus.
+
+ If you choose to build a module, it'll be called wl1251_spi.
+ Say N if unsure.
+
+config WL1251_SDIO
+ tristate "TI wl1251 SDIO support"
+ depends on WL1251 && MMC
+ ---help---
+ This module adds support for the SDIO interface of adapters using
+ TI wl1251 chipset. Select this if your platform is using
+ the SDIO bus.
+
+ If you choose to build a module, it'll be called
+ wl1251_sdio. Say N if unsure.
--- /dev/null
+wl1251-objs = main.o event.o tx.o rx.o ps.o cmd.o \
+ acx.o boot.o init.o debugfs.o io.o
+
+obj-$(CONFIG_WL1251) += wl1251.o
+obj-$(CONFIG_WL1251_SPI) += spi.o
+obj-$(CONFIG_WL1251_SDIO) += sdio.o
-#include "wl1251_acx.h"
+#include "acx.h"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/crc7.h>
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_cmd.h"
-#include "wl1251_ps.h"
+#include "reg.h"
+#include "cmd.h"
+#include "ps.h"
int wl1251_acx_frame_rates(struct wl1251 *wl, u8 ctrl_rate, u8 ctrl_mod,
u8 mgt_rate, u8 mgt_mod)
#define __WL1251_ACX_H__
#include "wl1251.h"
-#include "wl1251_cmd.h"
+#include "cmd.h"
/* Target's information element */
struct acx_header {
#include <linux/gpio.h>
#include <linux/slab.h>
-#include "wl1251_reg.h"
-#include "wl1251_boot.h"
-#include "wl1251_io.h"
-#include "wl1251_spi.h"
-#include "wl1251_event.h"
-#include "wl1251_acx.h"
+#include "reg.h"
+#include "boot.h"
+#include "io.h"
+#include "spi.h"
+#include "event.h"
+#include "acx.h"
void wl1251_boot_target_enable_interrupts(struct wl1251 *wl)
{
-#include "wl1251_cmd.h"
+#include "cmd.h"
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/crc7.h>
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_io.h"
-#include "wl1251_ps.h"
-#include "wl1251_acx.h"
+#include "reg.h"
+#include "io.h"
+#include "ps.h"
+#include "acx.h"
/**
* send command to firmware
*
*/
-#include "wl1251_debugfs.h"
+#include "debugfs.h"
#include <linux/skbuff.h>
#include <linux/slab.h>
#include "wl1251.h"
-#include "wl1251_acx.h"
-#include "wl1251_ps.h"
+#include "acx.h"
+#include "ps.h"
/* ms */
#define WL1251_DEBUGFS_STATS_LIFETIME 1000
*/
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_io.h"
-#include "wl1251_event.h"
-#include "wl1251_ps.h"
+#include "reg.h"
+#include "io.h"
+#include "event.h"
+#include "ps.h"
static int wl1251_event_scan_complete(struct wl1251 *wl,
struct event_mailbox *mbox)
#include <linux/module.h>
#include <linux/slab.h>
-#include "wl1251_init.h"
+#include "init.h"
#include "wl12xx_80211.h"
-#include "wl1251_acx.h"
-#include "wl1251_cmd.h"
-#include "wl1251_reg.h"
+#include "acx.h"
+#include "cmd.h"
+#include "reg.h"
int wl1251_hw_init_hwenc_config(struct wl1251 *wl)
{
*/
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_io.h"
+#include "reg.h"
+#include "io.h"
/* FIXME: this is static data nowadays and the table can be removed */
static enum wl12xx_acx_int_reg wl1251_io_reg_table[ACX_REG_TABLE_LEN] = {
#include "wl1251.h"
#include "wl12xx_80211.h"
-#include "wl1251_reg.h"
-#include "wl1251_io.h"
-#include "wl1251_cmd.h"
-#include "wl1251_event.h"
-#include "wl1251_tx.h"
-#include "wl1251_rx.h"
-#include "wl1251_ps.h"
-#include "wl1251_init.h"
-#include "wl1251_debugfs.h"
-#include "wl1251_boot.h"
+#include "reg.h"
+#include "io.h"
+#include "cmd.h"
+#include "event.h"
+#include "tx.h"
+#include "rx.h"
+#include "ps.h"
+#include "init.h"
+#include "debugfs.h"
+#include "boot.h"
void wl1251_enable_interrupts(struct wl1251 *wl)
{
*
*/
-#include "wl1251_reg.h"
-#include "wl1251_ps.h"
-#include "wl1251_cmd.h"
-#include "wl1251_io.h"
+#include "reg.h"
+#include "ps.h"
+#include "cmd.h"
+#include "io.h"
/* in ms */
#define WL1251_WAKEUP_TIMEOUT 100
#define __WL1251_PS_H__
#include "wl1251.h"
-#include "wl1251_acx.h"
+#include "acx.h"
int wl1251_ps_set_mode(struct wl1251 *wl, enum wl1251_cmd_ps_mode mode);
void wl1251_ps_elp_sleep(struct wl1251 *wl);
#include <net/mac80211.h>
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_io.h"
-#include "wl1251_rx.h"
-#include "wl1251_cmd.h"
-#include "wl1251_acx.h"
+#include "reg.h"
+#include "io.h"
+#include "rx.h"
+#include "cmd.h"
+#include "acx.h"
static void wl1251_rx_header(struct wl1251 *wl,
struct wl1251_rx_descriptor *desc)
#include <linux/wl12xx.h>
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_spi.h"
+#include "reg.h"
+#include "spi.h"
static irqreturn_t wl1251_irq(int irq, void *cookie)
{
#ifndef __WL1251_SPI_H__
#define __WL1251_SPI_H__
-#include "wl1251_cmd.h"
-#include "wl1251_acx.h"
-#include "wl1251_reg.h"
+#include "cmd.h"
+#include "acx.h"
+#include "reg.h"
#define WSPI_CMD_READ 0x40000000
#define WSPI_CMD_WRITE 0x00000000
#include <linux/module.h>
#include "wl1251.h"
-#include "wl1251_reg.h"
-#include "wl1251_tx.h"
-#include "wl1251_ps.h"
-#include "wl1251_io.h"
+#include "reg.h"
+#include "tx.h"
+#include "ps.h"
+#include "io.h"
static bool wl1251_tx_double_buffer_busy(struct wl1251 *wl, u32 data_out_count)
{
#define __WL1251_TX_H__
#include <linux/bitops.h>
-#include "wl1251_acx.h"
+#include "acx.h"
/*
*
This will enable TI wl12xx driver support. The drivers make
use of the mac80211 stack.
-config WL1251
- tristate "TI wl1251 support"
- depends on WL12XX && GENERIC_HARDIRQS
- select FW_LOADER
- select CRC7
- ---help---
- This module adds support for wireless adapters based on
- TI wl1251 chipset.
-
- If you choose to build a module, it'll be called wl1251. Say
- N if unsure.
-
-config WL1251_SPI
- tristate "TI wl1251 SPI support"
- depends on WL1251 && SPI_MASTER
- ---help---
- This module adds support for the SPI interface of adapters using
- TI wl1251 chipset. Select this if your platform is using
- the SPI bus.
-
- If you choose to build a module, it'll be called wl1251_spi.
- Say N if unsure.
-
-config WL1251_SDIO
- tristate "TI wl1251 SDIO support"
- depends on WL1251 && MMC
- ---help---
- This module adds support for the SDIO interface of adapters using
- TI wl1251 chipset. Select this if your platform is using
- the SDIO bus.
-
- If you choose to build a module, it'll be called
- wl1251_sdio. Say N if unsure.
-
config WL1271
tristate "TI wl1271 support"
depends on WL12XX && GENERIC_HARDIRQS
-wl1251-objs = wl1251_main.o wl1251_event.o \
- wl1251_tx.o wl1251_rx.o wl1251_ps.o wl1251_cmd.o \
- wl1251_acx.o wl1251_boot.o wl1251_init.o \
- wl1251_debugfs.o wl1251_io.o
-
-obj-$(CONFIG_WL1251) += wl1251.o
-obj-$(CONFIG_WL1251_SPI) += wl1251_spi.o
-obj-$(CONFIG_WL1251_SDIO) += wl1251_sdio.o
-
wl1271-objs = wl1271_main.o wl1271_cmd.o wl1271_io.o \
wl1271_event.o wl1271_tx.o wl1271_rx.o \
wl1271_ps.o wl1271_acx.o wl1271_boot.o \