--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Focusrite Scarlett 6i6/18i8/18i20 Gen 2 Driver for ALSA
+ *
+ * Copyright (c) 2018-2019 by Geoffrey D. Bennett <g at b4.vu>
+ *
+ * Based on the Scarlett (Gen 1) Driver for ALSA:
+ *
+ * Copyright (c) 2013 by Tobias Hoffmann
+ * Copyright (c) 2013 by Robin Gareus <robin at gareus.org>
+ * Copyright (c) 2002 by Takashi Iwai <tiwai at suse.de>
+ * Copyright (c) 2014 by Chris J Arges <chris.j.arges at canonical.com>
+ *
+ * Many codes borrowed from audio.c by
+ * Alan Cox (alan at lxorguk.ukuu.org.uk)
+ * Thomas Sailer (sailer at ife.ee.ethz.ch)
+ *
+ * Code cleanup:
+ * David Henningsson <david.henningsson at canonical.com>
+ */
+
+/* Mixer Interface for the Focusrite Scarlett 6i6/18i8/18i20 Gen 2 audio
+ * interface. Based on the Gen 1 driver and rewritten.
+ */
+
+/* The protocol was reverse engineered by looking at the communication
+ * between Focusrite Control 2.3.4 and the Focusrite(R) Scarlett 18i20
+ * (firmware 1083) using usbmon in July-August 2018.
+ *
+ * Scarlett 18i8 support added in April 2019.
+ *
+ * Scarlett 6i6 support added in June 2019 (thanks to Martin Wittmann
+ * for providing usbmon output and testing).
+ *
+ * This ALSA mixer gives access to:
+ * - input, output, mixer-matrix muxes
+ * - 18x10 mixer-matrix gain stages
+ * - gain/volume controls
+ * - level meters
+ * - line/inst level and pad controls
+ *
+ * <ditaa>
+ * /--------------\ 18chn 20chn /--------------\
+ * | Hardware in +--+------\ /-------------+--+ ALSA PCM out |
+ * \--------------/ | | | | \--------------/
+ * | | | /-----\ |
+ * | | | | | |
+ * | v v v | |
+ * | +---------------+ | |
+ * | \ Matrix Mux / | |
+ * | +-----+-----+ | |
+ * | | | |
+ * | |18chn | |
+ * | | | |
+ * | | 10chn| |
+ * | v | |
+ * | +------------+ | |
+ * | | Mixer | | |
+ * | | Matrix | | |
+ * | | | | |
+ * | | 18x10 Gain | | |
+ * | | stages | | |
+ * | +-----+------+ | |
+ * | | | |
+ * |18chn |10chn | |20chn
+ * | | | |
+ * | +----------/ |
+ * | | |
+ * v v v
+ * ===========================
+ * +---------------+ +--—------------+
+ * \ Output Mux / \ Capture Mux /
+ * +---+---+---+ +-----+-----+
+ * | | |
+ * 10chn| | |18chn
+ * | | |
+ * /--------------\ | | | /--------------\
+ * | S/PDIF, ADAT |<--/ |10chn \-->| ALSA PCM in |
+ * | Hardware out | | \--------------/
+ * \--------------/ |
+ * v
+ * +-------------+ Software gain per channel.
+ * | Master Gain |<-- 18i20 only: Switch per channel
+ * +------+------+ to select HW or SW gain control.
+ * |
+ * |10chn
+ * /--------------\ |
+ * | Analogue |<------/
+ * | Hardware out |
+ * \--------------/
+ * </ditaa>
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/moduleparam.h>
+
+#include <sound/control.h>
+#include <sound/tlv.h>
+
+#include "usbaudio.h"
+#include "mixer.h"
+#include "helper.h"
+
+#include "mixer_scarlett_gen2.h"
+
+/* device_setup value to enable */
+#define SCARLETT2_ENABLE 0x01
+
+/* some gui mixers can't handle negative ctl values */
+#define SCARLETT2_VOLUME_BIAS 127
+
+/* mixer range from -80dB to +6dB in 0.5dB steps */
+#define SCARLETT2_MIXER_MIN_DB -80
+#define SCARLETT2_MIXER_BIAS (-SCARLETT2_MIXER_MIN_DB * 2)
+#define SCARLETT2_MIXER_MAX_DB 6
+#define SCARLETT2_MIXER_MAX_VALUE \
+ ((SCARLETT2_MIXER_MAX_DB - SCARLETT2_MIXER_MIN_DB) * 2)
+
+/* map from (dB + 80) * 2 to mixer value
+ * for dB in 0 .. 172: int(8192 * pow(10, ((dB - 160) / 2 / 20)))
+ */
+static const u16 scarlett2_mixer_values[173] = {
+ 0, 0, 0, 0, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 2, 2, 2, 2,
+ 2, 2, 3, 3, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 6, 6, 6, 7, 7, 8, 8,
+ 9, 9, 10, 10, 11, 12, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21,
+ 23, 24, 25, 27, 29, 30, 32, 34, 36, 38, 41, 43, 46, 48, 51,
+ 54, 57, 61, 65, 68, 73, 77, 81, 86, 91, 97, 103, 109, 115,
+ 122, 129, 137, 145, 154, 163, 173, 183, 194, 205, 217, 230,
+ 244, 259, 274, 290, 307, 326, 345, 365, 387, 410, 434, 460,
+ 487, 516, 547, 579, 614, 650, 689, 730, 773, 819, 867, 919,
+ 973, 1031, 1092, 1157, 1225, 1298, 1375, 1456, 1543, 1634,
+ 1731, 1833, 1942, 2057, 2179, 2308, 2445, 2590, 2744, 2906,
+ 3078, 3261, 3454, 3659, 3876, 4105, 4349, 4606, 4879, 5168,
+ 5475, 5799, 6143, 6507, 6892, 7301, 7733, 8192, 8677, 9191,
+ 9736, 10313, 10924, 11571, 12257, 12983, 13752, 14567, 15430,
+ 16345
+};
+
+/* Maximum number of analogue outputs */
+#define SCARLETT2_ANALOGUE_MAX 10
+
+/* Maximum number of level and pad switches */
+#define SCARLETT2_LEVEL_SWITCH_MAX 2
+#define SCARLETT2_PAD_SWITCH_MAX 4
+
+/* Maximum number of inputs to the mixer */
+#define SCARLETT2_INPUT_MIX_MAX 18
+
+/* Maximum number of outputs from the mixer */
+#define SCARLETT2_OUTPUT_MIX_MAX 10
+
+/* Maximum size of the data in the USB mux assignment message:
+ * 18 inputs, 20 outputs, 18 matrix inputs, 8 spare
+ */
+#define SCARLETT2_MUX_MAX 64
+
+/* Number of meters:
+ * 18 inputs, 20 outputs, 18 matrix inputs
+ */
+#define SCARLETT2_NUM_METERS 56
+
+/* Hardware port types:
+ * - None (no input to mux)
+ * - Analogue I/O
+ * - S/PDIF I/O
+ * - ADAT I/O
+ * - Mixer I/O
+ * - PCM I/O
+ */
+enum {
+ SCARLETT2_PORT_TYPE_NONE = 0,
+ SCARLETT2_PORT_TYPE_ANALOGUE = 1,
+ SCARLETT2_PORT_TYPE_SPDIF = 2,
+ SCARLETT2_PORT_TYPE_ADAT = 3,
+ SCARLETT2_PORT_TYPE_MIX = 4,
+ SCARLETT2_PORT_TYPE_PCM = 5,
+ SCARLETT2_PORT_TYPE_COUNT = 6,
+};
+
+/* Count of total I/O and number available at each sample rate */
+enum {
+ SCARLETT2_PORT_IN = 0,
+ SCARLETT2_PORT_OUT = 1,
+ SCARLETT2_PORT_OUT_44 = 2,
+ SCARLETT2_PORT_OUT_88 = 3,
+ SCARLETT2_PORT_OUT_176 = 4,
+ SCARLETT2_PORT_DIRECTIONS = 5,
+};
+
+/* Hardware buttons on the 18i20 */
+#define SCARLETT2_BUTTON_MAX 2
+
+static const char *const scarlett2_button_names[SCARLETT2_BUTTON_MAX] = {
+ "Mute", "Dim"
+};
+
+/* Description of each hardware port type:
+ * - id: hardware ID for this port type
+ * - num: number of sources/destinations of this port type
+ * - src_descr: printf format string for mux input selections
+ * - src_num_offset: added to channel number for the fprintf
+ * - dst_descr: printf format string for mixer controls
+ */
+struct scarlett2_ports {
+ u16 id;
+ int num[SCARLETT2_PORT_DIRECTIONS];
+ const char * const src_descr;
+ int src_num_offset;
+ const char * const dst_descr;
+};
+
+struct scarlett2_device_info {
+ u8 line_out_hw_vol; /* line out hw volume is sw controlled */
+ u8 button_count; /* number of buttons */
+ u8 level_input_count; /* inputs with level selectable */
+ u8 pad_input_count; /* inputs with pad selectable */
+ const char * const line_out_descrs[SCARLETT2_ANALOGUE_MAX];
+ struct scarlett2_ports ports[SCARLETT2_PORT_TYPE_COUNT];
+};
+
+struct scarlett2_mixer_data {
+ struct usb_mixer_interface *mixer;
+ struct mutex usb_mutex; /* prevent sending concurrent USB requests */
+ struct mutex data_mutex; /* lock access to this data */
+ struct delayed_work work;
+ const struct scarlett2_device_info *info;
+ int num_mux_srcs;
+ u16 scarlett2_seq;
+ u8 vol_updated;
+ u8 master_vol;
+ u8 vol[SCARLETT2_ANALOGUE_MAX];
+ u8 vol_sw_hw_switch[SCARLETT2_ANALOGUE_MAX];
+ u8 level_switch[SCARLETT2_LEVEL_SWITCH_MAX];
+ u8 pad_switch[SCARLETT2_PAD_SWITCH_MAX];
+ u8 buttons[SCARLETT2_BUTTON_MAX];
+ struct snd_kcontrol *master_vol_ctl;
+ struct snd_kcontrol *vol_ctls[SCARLETT2_ANALOGUE_MAX];
+ struct snd_kcontrol *button_ctls[SCARLETT2_BUTTON_MAX];
+ u8 mux[SCARLETT2_MUX_MAX];
+ u8 mix[SCARLETT2_INPUT_MIX_MAX * SCARLETT2_OUTPUT_MIX_MAX];
+};
+
+/*** Model-specific data ***/
+
+static const struct scarlett2_device_info s6i6_gen2_info = {
+ /* The first two analogue inputs can be switched between line
+ * and instrument levels.
+ */
+ .level_input_count = 2,
+
+ /* The first two analogue inputs have an optional pad. */
+ .pad_input_count = 2,
+
+ .line_out_descrs = {
+ "Monitor L",
+ "Monitor R",
+ "Headphones L",
+ "Headphones R",
+ },
+
+ .ports = {
+ {
+ .id = 0x000,
+ .num = { 1, 0, 8, 8, 8 },
+ .src_descr = "Off",
+ .src_num_offset = 0,
+ },
+ {
+ .id = 0x080,
+ .num = { 4, 4, 4, 4, 4 },
+ .src_descr = "Analogue %d",
+ .src_num_offset = 1,
+ .dst_descr = "Analogue Output %02d Playback"
+ },
+ {
+ .id = 0x180,
+ .num = { 2, 2, 2, 2, 2 },
+ .src_descr = "S/PDIF %d",
+ .src_num_offset = 1,
+ .dst_descr = "S/PDIF Output %d Playback"
+ },
+ {
+ .id = 0x300,
+ .num = { 10, 18, 18, 18, 18 },
+ .src_descr = "Mix %c",
+ .src_num_offset = 65,
+ .dst_descr = "Mixer Input %02d Capture"
+ },
+ {
+ .id = 0x600,
+ .num = { 6, 6, 6, 6, 6 },
+ .src_descr = "PCM %d",
+ .src_num_offset = 1,
+ .dst_descr = "PCM %02d Capture"
+ },
+ },
+};
+
+static const struct scarlett2_device_info s18i8_gen2_info = {
+ /* The first two analogue inputs can be switched between line
+ * and instrument levels.
+ */
+ .level_input_count = 2,
+
+ /* The first four analogue inputs have an optional pad. */
+ .pad_input_count = 4,
+
+ .line_out_descrs = {
+ "Monitor L",
+ "Monitor R",
+ "Headphones 1 L",
+ "Headphones 1 R",
+ "Headphones 2 L",
+ "Headphones 2 R",
+ },
+
+ .ports = {
+ {
+ .id = 0x000,
+ .num = { 1, 0, 8, 8, 4 },
+ .src_descr = "Off",
+ .src_num_offset = 0,
+ },
+ {
+ .id = 0x080,
+ .num = { 8, 6, 6, 6, 6 },
+ .src_descr = "Analogue %d",
+ .src_num_offset = 1,
+ .dst_descr = "Analogue Output %02d Playback"
+ },
+ {
+ /* S/PDIF outputs aren't available at 192KHz
+ * but are included in the USB mux I/O
+ * assignment message anyway
+ */
+ .id = 0x180,
+ .num = { 2, 2, 2, 2, 2 },
+ .src_descr = "S/PDIF %d",
+ .src_num_offset = 1,
+ .dst_descr = "S/PDIF Output %d Playback"
+ },
+ {
+ .id = 0x200,
+ .num = { 8, 0, 0, 0, 0 },
+ .src_descr = "ADAT %d",
+ .src_num_offset = 1,
+ },
+ {
+ .id = 0x300,
+ .num = { 10, 18, 18, 18, 18 },
+ .src_descr = "Mix %c",
+ .src_num_offset = 65,
+ .dst_descr = "Mixer Input %02d Capture"
+ },
+ {
+ .id = 0x600,
+ .num = { 20, 18, 18, 14, 10 },
+ .src_descr = "PCM %d",
+ .src_num_offset = 1,
+ .dst_descr = "PCM %02d Capture"
+ },
+ },
+};
+
+static const struct scarlett2_device_info s18i20_gen2_info = {
+ /* The analogue line outputs on the 18i20 can be switched
+ * between software and hardware volume control
+ */
+ .line_out_hw_vol = 1,
+
+ /* Mute and dim buttons */
+ .button_count = 2,
+
+ .line_out_descrs = {
+ "Monitor L",
+ "Monitor R",
+ NULL,
+ NULL,
+ NULL,
+ NULL,
+ "Headphones 1 L",
+ "Headphones 1 R",
+ "Headphones 2 L",
+ "Headphones 2 R",
+ },
+
+ .ports = {
+ {
+ .id = 0x000,
+ .num = { 1, 0, 8, 8, 6 },
+ .src_descr = "Off",
+ .src_num_offset = 0,
+ },
+ {
+ .id = 0x080,
+ .num = { 8, 10, 10, 10, 10 },
+ .src_descr = "Analogue %d",
+ .src_num_offset = 1,
+ .dst_descr = "Analogue Output %02d Playback"
+ },
+ {
+ /* S/PDIF outputs aren't available at 192KHz
+ * but are included in the USB mux I/O
+ * assignment message anyway
+ */
+ .id = 0x180,
+ .num = { 2, 2, 2, 2, 2 },
+ .src_descr = "S/PDIF %d",
+ .src_num_offset = 1,
+ .dst_descr = "S/PDIF Output %d Playback"
+ },
+ {
+ .id = 0x200,
+ .num = { 8, 8, 8, 4, 0 },
+ .src_descr = "ADAT %d",
+ .src_num_offset = 1,
+ .dst_descr = "ADAT Output %d Playback"
+ },
+ {
+ .id = 0x300,
+ .num = { 10, 18, 18, 18, 18 },
+ .src_descr = "Mix %c",
+ .src_num_offset = 65,
+ .dst_descr = "Mixer Input %02d Capture"
+ },
+ {
+ .id = 0x600,
+ .num = { 20, 18, 18, 14, 10 },
+ .src_descr = "PCM %d",
+ .src_num_offset = 1,
+ .dst_descr = "PCM %02d Capture"
+ },
+ },
+};
+
+/* get the starting port index number for a given port type/direction */
+static int scarlett2_get_port_start_num(const struct scarlett2_ports *ports,
+ int direction, int port_type)
+{
+ int i, num = 0;
+
+ for (i = 0; i < port_type; i++)
+ num += ports[i].num[direction];
+
+ return num;
+}
+
+/*** USB Interactions ***/
+
+/* Vendor-Specific Interface, Endpoint, MaxPacketSize, Interval */
+#define SCARLETT2_USB_VENDOR_SPECIFIC_INTERFACE 5
+#define SCARLETT2_USB_INTERRUPT_ENDPOINT 4
+#define SCARLETT2_USB_INTERRUPT_MAX_DATA 64
+#define SCARLETT2_USB_INTERRUPT_INTERVAL 3
+
+/* Interrupt flags for volume and mute/dim button changes */
+#define SCARLETT2_USB_INTERRUPT_VOL_CHANGE 0x400000
+#define SCARLETT2_USB_INTERRUPT_BUTTON_CHANGE 0x200000
+
+/* Commands for sending/receiving requests/responses */
+#define SCARLETT2_USB_VENDOR_SPECIFIC_CMD_REQ 2
+#define SCARLETT2_USB_VENDOR_SPECIFIC_CMD_RESP 3
+
+#define SCARLETT2_USB_INIT_SEQ 0x00000000
+#define SCARLETT2_USB_GET_METER_LEVELS 0x00001001
+#define SCARLETT2_USB_SET_MIX 0x00002002
+#define SCARLETT2_USB_SET_MUX 0x00003002
+#define SCARLETT2_USB_GET_DATA 0x00800000
+#define SCARLETT2_USB_SET_DATA 0x00800001
+#define SCARLETT2_USB_DATA_CMD 0x00800002
+#define SCARLETT2_USB_CONFIG_SAVE 6
+
+#define SCARLETT2_USB_VOLUME_STATUS_OFFSET 0x31
+#define SCARLETT2_USB_METER_LEVELS_GET_MAGIC 1
+
+/* volume status is read together (matches scarlett2_config_items[]) */
+struct scarlett2_usb_volume_status {
+ /* mute & dim buttons */
+ u8 buttons[SCARLETT2_BUTTON_MAX];
+
+ u8 pad1;
+
+ /* software volume setting */
+ s16 sw_vol[SCARLETT2_ANALOGUE_MAX];
+
+ /* actual volume of output inc. dim (-18dB) */
+ s16 hw_vol[SCARLETT2_ANALOGUE_MAX];
+
+ u8 pad2[SCARLETT2_ANALOGUE_MAX];
+
+ /* sw (0) or hw (1) controlled */
+ u8 sw_hw_switch[SCARLETT2_ANALOGUE_MAX];
+
+ u8 pad3[6];
+
+ /* front panel volume knob */
+ s16 master_vol;
+} __packed;
+
+/* Configuration parameters that can be read and written */
+enum {
+ SCARLETT2_CONFIG_BUTTONS = 0,
+ SCARLETT2_CONFIG_LINE_OUT_VOLUME = 1,
+ SCARLETT2_CONFIG_SW_HW_SWITCH = 2,
+ SCARLETT2_CONFIG_LEVEL_SWITCH = 3,
+ SCARLETT2_CONFIG_PAD_SWITCH = 4,
+ SCARLETT2_CONFIG_COUNT = 5
+};
+
+/* Location, size, and activation command number for the configuration
+ * parameters
+ */
+struct scarlett2_config {
+ u8 offset;
+ u8 size;
+ u8 activate;
+};
+
+static const struct scarlett2_config
+ scarlett2_config_items[SCARLETT2_CONFIG_COUNT] = {
+ /* Mute/Dim Buttons */
+ {
+ .offset = 0x31,
+ .size = 1,
+ .activate = 2
+ },
+
+ /* Line Out Volume */
+ {
+ .offset = 0x34,
+ .size = 2,
+ .activate = 1
+ },
+
+ /* SW/HW Volume Switch */
+ {
+ .offset = 0x66,
+ .size = 1,
+ .activate = 3
+ },
+
+ /* Level Switch */
+ {
+ .offset = 0x7c,
+ .size = 1,
+ .activate = 7
+ },
+
+ /* Pad Switch */
+ {
+ .offset = 0x84,
+ .size = 1,
+ .activate = 8
+ }
+};
+
+/* proprietary request/response format */
+struct scarlett2_usb_packet {
+ u32 cmd;
+ u16 size;
+ u16 seq;
+ u32 error;
+ u32 pad;
+ u8 data[];
+};
+
+#define SCARLETT2_USB_PACKET_LEN (sizeof(struct scarlett2_usb_packet))
+
+static void scarlett2_fill_request_header(struct scarlett2_mixer_data *private,
+ struct scarlett2_usb_packet *req,
+ u32 cmd, u16 req_size)
+{
+ /* sequence must go up by 1 for each request */
+ u16 seq = private->scarlett2_seq++;
+
+ req->cmd = cpu_to_le32(cmd);
+ req->size = cpu_to_le16(req_size);
+ req->seq = cpu_to_le16(seq);
+ req->error = 0;
+ req->pad = 0;
+}
+
+/* Send a proprietary format request to the Scarlett interface */
+static int scarlett2_usb(
+ struct usb_mixer_interface *mixer, u32 cmd,
+ void *req_data, u16 req_size, void *resp_data, u16 resp_size)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ u16 req_buf_size = sizeof(struct scarlett2_usb_packet) + req_size;
+ u16 resp_buf_size = sizeof(struct scarlett2_usb_packet) + resp_size;
+ struct scarlett2_usb_packet *req = NULL, *resp = NULL;
+ int err = 0;
+
+ req = kmalloc(req_buf_size, GFP_KERNEL);
+ if (!req) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ resp = kmalloc(resp_buf_size, GFP_KERNEL);
+ if (!resp) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ mutex_lock(&private->usb_mutex);
+
+ /* build request message and send it */
+
+ scarlett2_fill_request_header(private, req, cmd, req_size);
+
+ if (req_size)
+ memcpy(req->data, req_data, req_size);
+
+ err = snd_usb_ctl_msg(mixer->chip->dev,
+ usb_sndctrlpipe(mixer->chip->dev, 0),
+ SCARLETT2_USB_VENDOR_SPECIFIC_CMD_REQ,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_OUT,
+ 0,
+ SCARLETT2_USB_VENDOR_SPECIFIC_INTERFACE,
+ req,
+ req_buf_size);
+
+ if (err != req_buf_size) {
+ usb_audio_err(
+ mixer->chip,
+ "Scarlett Gen 2 USB request result cmd %x was %d\n",
+ cmd, err);
+ err = -EINVAL;
+ goto unlock;
+ }
+
+ /* send a second message to get the response */
+
+ err = snd_usb_ctl_msg(mixer->chip->dev,
+ usb_sndctrlpipe(mixer->chip->dev, 0),
+ SCARLETT2_USB_VENDOR_SPECIFIC_CMD_RESP,
+ USB_RECIP_INTERFACE | USB_TYPE_CLASS | USB_DIR_IN,
+ 0,
+ SCARLETT2_USB_VENDOR_SPECIFIC_INTERFACE,
+ resp,
+ resp_buf_size);
+
+ /* validate the response */
+
+ if (err != resp_buf_size) {
+ usb_audio_err(
+ mixer->chip,
+ "Scarlett Gen 2 USB response result cmd %x was %d\n",
+ cmd, err);
+ err = -EINVAL;
+ goto unlock;
+ }
+
+ if (resp->cmd != req->cmd ||
+ resp->seq != req->seq ||
+ resp_size != le16_to_cpu(resp->size) ||
+ resp->error ||
+ resp->pad) {
+ usb_audio_err(
+ mixer->chip,
+ "Scarlett Gen 2 USB invalid response; "
+ "cmd tx/rx %d/%d seq %d/%d size %d/%d "
+ "error %d pad %d\n",
+ le16_to_cpu(req->cmd), le16_to_cpu(resp->cmd),
+ le16_to_cpu(req->seq), le16_to_cpu(resp->seq),
+ resp_size, le16_to_cpu(resp->size),
+ le16_to_cpu(resp->error),
+ le16_to_cpu(resp->pad));
+ err = -EINVAL;
+ goto unlock;
+ }
+
+ if (resp_size > 0)
+ memcpy(resp_data, resp->data, resp_size);
+
+unlock:
+ mutex_unlock(&private->usb_mutex);
+error:
+ kfree(req);
+ kfree(resp);
+ return err;
+}
+
+/* Send SCARLETT2_USB_DATA_CMD SCARLETT2_USB_CONFIG_SAVE */
+static void scarlett2_config_save(struct usb_mixer_interface *mixer)
+{
+ u32 req = cpu_to_le32(SCARLETT2_USB_CONFIG_SAVE);
+
+ scarlett2_usb(mixer, SCARLETT2_USB_DATA_CMD,
+ &req, sizeof(u32),
+ NULL, 0);
+}
+
+/* Delayed work to save config */
+static void scarlett2_config_save_work(struct work_struct *work)
+{
+ struct scarlett2_mixer_data *private =
+ container_of(work, struct scarlett2_mixer_data, work.work);
+
+ scarlett2_config_save(private->mixer);
+}
+
+/* Send a USB message to set a configuration parameter (volume level,
+ * sw/hw volume switch, line/inst level switch, or pad switch)
+ */
+static int scarlett2_usb_set_config(
+ struct usb_mixer_interface *mixer,
+ int config_item_num, int index, int value)
+{
+ const struct scarlett2_config config_item =
+ scarlett2_config_items[config_item_num];
+ struct {
+ u32 offset;
+ u32 bytes;
+ s32 value;
+ } __packed req;
+ u32 req2;
+ int err;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ /* Cancel any pending NVRAM save */
+ cancel_delayed_work_sync(&private->work);
+
+ /* Send the configuration parameter data */
+ req.offset = cpu_to_le32(config_item.offset + index * config_item.size);
+ req.bytes = cpu_to_le32(config_item.size);
+ req.value = cpu_to_le32(value);
+ err = scarlett2_usb(mixer, SCARLETT2_USB_SET_DATA,
+ &req, sizeof(u32) * 2 + config_item.size,
+ NULL, 0);
+ if (err < 0)
+ return err;
+
+ /* Activate the change */
+ req2 = cpu_to_le32(config_item.activate);
+ err = scarlett2_usb(mixer, SCARLETT2_USB_DATA_CMD,
+ &req2, sizeof(req2), NULL, 0);
+ if (err < 0)
+ return err;
+
+ /* Schedule the change to be written to NVRAM */
+ schedule_delayed_work(&private->work, msecs_to_jiffies(2000));
+
+ return 0;
+}
+
+/* Send a USB message to get data; result placed in *buf */
+static int scarlett2_usb_get(
+ struct usb_mixer_interface *mixer,
+ int offset, void *buf, int size)
+{
+ struct {
+ u32 offset;
+ u32 size;
+ } __packed req;
+
+ req.offset = cpu_to_le32(offset);
+ req.size = cpu_to_le32(size);
+ return scarlett2_usb(mixer, SCARLETT2_USB_GET_DATA,
+ &req, sizeof(req), buf, size);
+}
+
+/* Send a USB message to get configuration parameters; result placed in *buf */
+static int scarlett2_usb_get_config(
+ struct usb_mixer_interface *mixer,
+ int config_item_num, int count, void *buf)
+{
+ const struct scarlett2_config config_item =
+ scarlett2_config_items[config_item_num];
+ int size = config_item.size * count;
+
+ return scarlett2_usb_get(mixer, config_item.offset, buf, size);
+}
+
+/* Send a USB message to get volume status; result placed in *buf */
+static int scarlett2_usb_get_volume_status(
+ struct usb_mixer_interface *mixer,
+ struct scarlett2_usb_volume_status *buf)
+{
+ return scarlett2_usb_get(mixer, SCARLETT2_USB_VOLUME_STATUS_OFFSET,
+ buf, sizeof(*buf));
+}
+
+/* Send a USB message to set the volumes for all inputs of one mix
+ * (values obtained from private->mix[])
+ */
+static int scarlett2_usb_set_mix(struct usb_mixer_interface *mixer,
+ int mix_num)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+
+ struct {
+ u16 mix_num;
+ u16 data[SCARLETT2_INPUT_MIX_MAX];
+ } __packed req;
+
+ int i, j;
+ int num_mixer_in =
+ info->ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_OUT];
+
+ req.mix_num = cpu_to_le16(mix_num);
+
+ for (i = 0, j = mix_num * num_mixer_in; i < num_mixer_in; i++, j++)
+ req.data[i] = cpu_to_le16(
+ scarlett2_mixer_values[private->mix[j]]
+ );
+
+ return scarlett2_usb(mixer, SCARLETT2_USB_SET_MIX,
+ &req, (num_mixer_in + 1) * sizeof(u16),
+ NULL, 0);
+}
+
+/* Convert a port number index (per info->ports) to a hardware ID */
+static u32 scarlett2_mux_src_num_to_id(const struct scarlett2_ports *ports,
+ int num)
+{
+ int port_type;
+
+ for (port_type = 0;
+ port_type < SCARLETT2_PORT_TYPE_COUNT;
+ port_type++) {
+ if (num < ports[port_type].num[SCARLETT2_PORT_IN])
+ return ports[port_type].id | num;
+ num -= ports[port_type].num[SCARLETT2_PORT_IN];
+ }
+
+ /* Oops */
+ return 0;
+}
+
+/* Send USB messages to set mux inputs */
+static int scarlett2_usb_set_mux(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+ const struct scarlett2_ports *ports = info->ports;
+ int rate, port_dir_rate;
+
+ static const int assignment_order[SCARLETT2_PORT_TYPE_COUNT] = {
+ SCARLETT2_PORT_TYPE_PCM,
+ SCARLETT2_PORT_TYPE_ANALOGUE,
+ SCARLETT2_PORT_TYPE_SPDIF,
+ SCARLETT2_PORT_TYPE_ADAT,
+ SCARLETT2_PORT_TYPE_MIX,
+ SCARLETT2_PORT_TYPE_NONE,
+ };
+
+ struct {
+ u16 pad;
+ u16 num;
+ u32 data[SCARLETT2_MUX_MAX];
+ } __packed req;
+
+ req.pad = 0;
+
+ /* mux settings for each rate */
+ for (rate = 0, port_dir_rate = SCARLETT2_PORT_OUT_44;
+ port_dir_rate <= SCARLETT2_PORT_OUT_176;
+ rate++, port_dir_rate++) {
+ int order_num, i, err;
+
+ req.num = cpu_to_le16(rate);
+
+ for (order_num = 0, i = 0;
+ order_num < SCARLETT2_PORT_TYPE_COUNT;
+ order_num++) {
+ int port_type = assignment_order[order_num];
+ int j = scarlett2_get_port_start_num(ports,
+ SCARLETT2_PORT_OUT,
+ port_type);
+ int port_id = ports[port_type].id;
+ int channel;
+
+ for (channel = 0;
+ channel < ports[port_type].num[port_dir_rate];
+ channel++, i++, j++)
+ /* lower 12 bits for the destination and
+ * next 12 bits for the source
+ */
+ req.data[i] = !port_id
+ ? 0
+ : cpu_to_le32(
+ port_id |
+ channel |
+ scarlett2_mux_src_num_to_id(
+ ports, private->mux[j]
+ ) << 12
+ );
+
+ /* skip private->mux[j] entries not output */
+ j += ports[port_type].num[SCARLETT2_PORT_OUT] -
+ ports[port_type].num[port_dir_rate];
+ }
+
+ err = scarlett2_usb(mixer, SCARLETT2_USB_SET_MUX,
+ &req, (i + 1) * sizeof(u32),
+ NULL, 0);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/* Send USB message to get meter levels */
+static int scarlett2_usb_get_meter_levels(struct usb_mixer_interface *mixer,
+ u16 *levels)
+{
+ struct {
+ u16 pad;
+ u16 num_meters;
+ u32 magic;
+ } __packed req;
+ u32 resp[SCARLETT2_NUM_METERS];
+ int i, err;
+
+ req.pad = 0;
+ req.num_meters = cpu_to_le16(SCARLETT2_NUM_METERS);
+ req.magic = cpu_to_le32(SCARLETT2_USB_METER_LEVELS_GET_MAGIC);
+ err = scarlett2_usb(mixer, SCARLETT2_USB_GET_METER_LEVELS,
+ &req, sizeof(req), resp, sizeof(resp));
+ if (err < 0)
+ return err;
+
+ /* copy, convert to u16 */
+ for (i = 0; i < SCARLETT2_NUM_METERS; i++)
+ levels[i] = resp[i];
+
+ return 0;
+}
+
+/*** Control Functions ***/
+
+/* helper function to create a new control */
+static int scarlett2_add_new_ctl(struct usb_mixer_interface *mixer,
+ const struct snd_kcontrol_new *ncontrol,
+ int index, int channels, const char *name,
+ struct snd_kcontrol **kctl_return)
+{
+ struct snd_kcontrol *kctl;
+ struct usb_mixer_elem_info *elem;
+ int err;
+
+ elem = kzalloc(sizeof(*elem), GFP_KERNEL);
+ if (!elem)
+ return -ENOMEM;
+
+ elem->head.mixer = mixer;
+ elem->control = index;
+ elem->head.id = index;
+ elem->channels = channels;
+
+ kctl = snd_ctl_new1(ncontrol, elem);
+ if (!kctl) {
+ kfree(elem);
+ return -ENOMEM;
+ }
+ kctl->private_free = snd_usb_mixer_elem_free;
+
+ strlcpy(kctl->id.name, name, sizeof(kctl->id.name));
+
+ err = snd_usb_mixer_add_control(&elem->head, kctl);
+ if (err < 0)
+ return err;
+
+ if (kctl_return)
+ *kctl_return = kctl;
+
+ return 0;
+}
+
+/*** Analogue Line Out Volume Controls ***/
+
+/* Update hardware volume controls after receiving notification that
+ * they have changed
+ */
+static int scarlett2_update_volumes(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_ports *ports = private->info->ports;
+ struct scarlett2_usb_volume_status volume_status;
+ int num_line_out =
+ ports[SCARLETT2_PORT_TYPE_ANALOGUE].num[SCARLETT2_PORT_OUT];
+ int err, i;
+
+ private->vol_updated = 0;
+
+ err = scarlett2_usb_get_volume_status(mixer, &volume_status);
+ if (err < 0)
+ return err;
+
+ private->master_vol = clamp(
+ volume_status.master_vol + SCARLETT2_VOLUME_BIAS,
+ 0, SCARLETT2_VOLUME_BIAS);
+
+ for (i = 0; i < num_line_out; i++) {
+ if (private->vol_sw_hw_switch[i])
+ private->vol[i] = private->master_vol;
+ }
+
+ for (i = 0; i < private->info->button_count; i++)
+ private->buttons[i] = !!volume_status.buttons[i];
+
+ return 0;
+}
+
+static int scarlett2_volume_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = elem->channels;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = SCARLETT2_VOLUME_BIAS;
+ uinfo->value.integer.step = 1;
+ return 0;
+}
+
+static int scarlett2_master_volume_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ if (private->vol_updated) {
+ mutex_lock(&private->data_mutex);
+ scarlett2_update_volumes(mixer);
+ mutex_unlock(&private->data_mutex);
+ }
+
+ ucontrol->value.integer.value[0] = private->master_vol;
+ return 0;
+}
+
+static int scarlett2_volume_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ int index = elem->control;
+
+ if (private->vol_updated) {
+ mutex_lock(&private->data_mutex);
+ scarlett2_update_volumes(mixer);
+ mutex_unlock(&private->data_mutex);
+ }
+
+ ucontrol->value.integer.value[0] = private->vol[index];
+ return 0;
+}
+
+static int scarlett2_volume_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->vol[index];
+ val = ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->vol[index] = val;
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME,
+ index, val - SCARLETT2_VOLUME_BIAS);
+ if (err == 0)
+ err = 1;
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const DECLARE_TLV_DB_MINMAX(
+ db_scale_scarlett2_gain, -SCARLETT2_VOLUME_BIAS * 100, 0
+);
+
+static const struct snd_kcontrol_new scarlett2_master_volume_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "",
+ .info = scarlett2_volume_ctl_info,
+ .get = scarlett2_master_volume_ctl_get,
+ .private_value = 0, /* max value */
+ .tlv = { .p = db_scale_scarlett2_gain }
+};
+
+static const struct snd_kcontrol_new scarlett2_line_out_volume_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "",
+ .info = scarlett2_volume_ctl_info,
+ .get = scarlett2_volume_ctl_get,
+ .put = scarlett2_volume_ctl_put,
+ .private_value = 0, /* max value */
+ .tlv = { .p = db_scale_scarlett2_gain }
+};
+
+/*** HW/SW Volume Switch Controls ***/
+
+static int scarlett2_sw_hw_enum_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *const values[2] = {
+ "SW", "HW"
+ };
+
+ return snd_ctl_enum_info(uinfo, 1, 2, values);
+}
+
+static int scarlett2_sw_hw_enum_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_mixer_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.enumerated.item[0] =
+ private->vol_sw_hw_switch[elem->control];
+ return 0;
+}
+
+static int scarlett2_sw_hw_enum_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->vol_sw_hw_switch[index];
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->vol_sw_hw_switch[index] = val;
+
+ /* Change access mode to RO (hardware controlled volume)
+ * or RW (software controlled volume)
+ */
+ if (val)
+ private->vol_ctls[index]->vd[0].access &=
+ ~SNDRV_CTL_ELEM_ACCESS_WRITE;
+ else
+ private->vol_ctls[index]->vd[0].access |=
+ SNDRV_CTL_ELEM_ACCESS_WRITE;
+
+ /* Reset volume to master volume */
+ private->vol[index] = private->master_vol;
+
+ /* Set SW volume to current HW volume */
+ err = scarlett2_usb_set_config(
+ mixer, SCARLETT2_CONFIG_LINE_OUT_VOLUME,
+ index, private->master_vol - SCARLETT2_VOLUME_BIAS);
+ if (err < 0)
+ goto unlock;
+
+ /* Notify of RO/RW change */
+ snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_INFO,
+ &private->vol_ctls[index]->id);
+
+ /* Send SW/HW switch change to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_SW_HW_SWITCH,
+ index, val);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_sw_hw_enum_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett2_sw_hw_enum_ctl_info,
+ .get = scarlett2_sw_hw_enum_ctl_get,
+ .put = scarlett2_sw_hw_enum_ctl_put,
+};
+
+/*** Line Level/Instrument Level Switch Controls ***/
+
+static int scarlett2_level_enum_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ static const char *const values[2] = {
+ "Line", "Inst"
+ };
+
+ return snd_ctl_enum_info(uinfo, 1, 2, values);
+}
+
+static int scarlett2_level_enum_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_mixer_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.enumerated.item[0] =
+ private->level_switch[elem->control];
+ return 0;
+}
+
+static int scarlett2_level_enum_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->level_switch[index];
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->level_switch[index] = val;
+
+ /* Send switch change to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_LEVEL_SWITCH,
+ index, val);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_level_enum_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett2_level_enum_ctl_info,
+ .get = scarlett2_level_enum_ctl_get,
+ .put = scarlett2_level_enum_ctl_put,
+};
+
+/*** Pad Switch Controls ***/
+
+static int scarlett2_pad_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_mixer_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.enumerated.item[0] =
+ private->pad_switch[elem->control];
+ return 0;
+}
+
+static int scarlett2_pad_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->pad_switch[index];
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->pad_switch[index] = val;
+
+ /* Send switch change to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_PAD_SWITCH,
+ index, val);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_pad_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = snd_ctl_boolean_mono_info,
+ .get = scarlett2_pad_ctl_get,
+ .put = scarlett2_pad_ctl_put,
+};
+
+/*** Mute/Dim Controls ***/
+
+static int scarlett2_button_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ if (private->vol_updated) {
+ mutex_lock(&private->data_mutex);
+ scarlett2_update_volumes(mixer);
+ mutex_unlock(&private->data_mutex);
+ }
+
+ ucontrol->value.enumerated.item[0] = private->buttons[elem->control];
+ return 0;
+}
+
+static int scarlett2_button_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->buttons[index];
+ val = !!ucontrol->value.integer.value[0];
+
+ if (oval == val)
+ goto unlock;
+
+ private->buttons[index] = val;
+
+ /* Send switch change to the device */
+ err = scarlett2_usb_set_config(mixer, SCARLETT2_CONFIG_BUTTONS,
+ index, val);
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_button_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = snd_ctl_boolean_mono_info,
+ .get = scarlett2_button_ctl_get,
+ .put = scarlett2_button_ctl_put
+};
+
+/*** Create the analogue output controls ***/
+
+static int scarlett2_add_line_out_ctls(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+ const struct scarlett2_ports *ports = info->ports;
+ int num_line_out =
+ ports[SCARLETT2_PORT_TYPE_ANALOGUE].num[SCARLETT2_PORT_OUT];
+ int err, i;
+ char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
+
+ /* Add R/O HW volume control */
+ if (info->line_out_hw_vol) {
+ snprintf(s, sizeof(s), "Master HW Playback Volume");
+ err = scarlett2_add_new_ctl(mixer,
+ &scarlett2_master_volume_ctl,
+ 0, 1, s, &private->master_vol_ctl);
+ if (err < 0)
+ return err;
+ }
+
+ /* Add volume controls */
+ for (i = 0; i < num_line_out; i++) {
+
+ /* Fader */
+ if (info->line_out_descrs[i])
+ snprintf(s, sizeof(s),
+ "Line %02d (%s) Playback Volume",
+ i + 1, info->line_out_descrs[i]);
+ else
+ snprintf(s, sizeof(s),
+ "Line %02d Playback Volume",
+ i + 1);
+ err = scarlett2_add_new_ctl(mixer,
+ &scarlett2_line_out_volume_ctl,
+ i, 1, s, &private->vol_ctls[i]);
+ if (err < 0)
+ return err;
+
+ /* Make the fader read-only if the SW/HW switch is set to HW */
+ if (private->vol_sw_hw_switch[i])
+ private->vol_ctls[i]->vd[0].access &=
+ ~SNDRV_CTL_ELEM_ACCESS_WRITE;
+
+ /* SW/HW Switch */
+ if (info->line_out_hw_vol) {
+ snprintf(s, sizeof(s),
+ "Line Out %02d Volume Control Playback Enum",
+ i + 1);
+ err = scarlett2_add_new_ctl(mixer,
+ &scarlett2_sw_hw_enum_ctl,
+ i, 1, s, NULL);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ /* Add HW button controls */
+ for (i = 0; i < private->info->button_count; i++) {
+ err = scarlett2_add_new_ctl(mixer, &scarlett2_button_ctl,
+ i, 1, scarlett2_button_names[i],
+ &private->button_ctls[i]);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/*** Create the analogue input controls ***/
+
+static int scarlett2_add_line_in_ctls(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+ int err, i;
+ char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
+
+ /* Add input level (line/inst) controls */
+ for (i = 0; i < info->level_input_count; i++) {
+ snprintf(s, sizeof(s), "Line In %d Level Capture Enum", i + 1);
+ err = scarlett2_add_new_ctl(mixer, &scarlett2_level_enum_ctl,
+ i, 1, s, NULL);
+ if (err < 0)
+ return err;
+ }
+
+ /* Add input pad controls */
+ for (i = 0; i < info->pad_input_count; i++) {
+ snprintf(s, sizeof(s), "Line In %d Pad Capture Switch", i + 1);
+ err = scarlett2_add_new_ctl(mixer, &scarlett2_pad_ctl,
+ i, 1, s, NULL);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
+
+/*** Mixer Volume Controls ***/
+
+static int scarlett2_mixer_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = elem->channels;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = SCARLETT2_MIXER_MAX_VALUE;
+ uinfo->value.integer.step = 1;
+ return 0;
+}
+
+static int scarlett2_mixer_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_mixer_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.integer.value[0] = private->mix[elem->control];
+ return 0;
+}
+
+static int scarlett2_mixer_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+ const struct scarlett2_ports *ports = info->ports;
+ int oval, val, num_mixer_in, mix_num, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->mix[elem->control];
+ val = ucontrol->value.integer.value[0];
+ num_mixer_in = ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_OUT];
+ mix_num = elem->control / num_mixer_in;
+
+ if (oval == val)
+ goto unlock;
+
+ private->mix[elem->control] = val;
+ err = scarlett2_usb_set_mix(mixer, mix_num);
+ if (err == 0)
+ err = 1;
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const DECLARE_TLV_DB_MINMAX(
+ db_scale_scarlett2_mixer,
+ SCARLETT2_MIXER_MIN_DB * 100,
+ SCARLETT2_MIXER_MAX_DB * 100
+);
+
+static const struct snd_kcontrol_new scarlett2_mixer_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .access = SNDRV_CTL_ELEM_ACCESS_READWRITE |
+ SNDRV_CTL_ELEM_ACCESS_TLV_READ,
+ .name = "",
+ .info = scarlett2_mixer_ctl_info,
+ .get = scarlett2_mixer_ctl_get,
+ .put = scarlett2_mixer_ctl_put,
+ .private_value = SCARLETT2_MIXER_MAX_DB, /* max value */
+ .tlv = { .p = db_scale_scarlett2_mixer }
+};
+
+static int scarlett2_add_mixer_ctls(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_ports *ports = private->info->ports;
+ int err, i, j;
+ int index;
+ char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
+
+ int num_inputs = ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_OUT];
+ int num_outputs = ports[SCARLETT2_PORT_TYPE_MIX].num[SCARLETT2_PORT_IN];
+
+ for (i = 0, index = 0; i < num_outputs; i++) {
+ for (j = 0; j < num_inputs; j++, index++) {
+ snprintf(s, sizeof(s),
+ "Mix %c Input %02d Playback Volume",
+ 'A' + i, j + 1);
+ err = scarlett2_add_new_ctl(mixer, &scarlett2_mixer_ctl,
+ index, 1, s, NULL);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/*** Mux Source Selection Controls ***/
+
+static int scarlett2_mux_src_enum_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_mixer_data *private = elem->head.mixer->private_data;
+ const struct scarlett2_ports *ports = private->info->ports;
+ unsigned int item = uinfo->value.enumerated.item;
+ int items = private->num_mux_srcs;
+ int port_type;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
+ uinfo->count = elem->channels;
+ uinfo->value.enumerated.items = items;
+
+ if (item >= items)
+ item = uinfo->value.enumerated.item = items - 1;
+
+ for (port_type = 0;
+ port_type < SCARLETT2_PORT_TYPE_COUNT;
+ port_type++) {
+ if (item < ports[port_type].num[SCARLETT2_PORT_IN]) {
+ sprintf(uinfo->value.enumerated.name,
+ ports[port_type].src_descr,
+ item + ports[port_type].src_num_offset);
+ return 0;
+ }
+ item -= ports[port_type].num[SCARLETT2_PORT_IN];
+ }
+
+ return -EINVAL;
+}
+
+static int scarlett2_mux_src_enum_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct scarlett2_mixer_data *private = elem->head.mixer->private_data;
+
+ ucontrol->value.enumerated.item[0] = private->mux[elem->control];
+ return 0;
+}
+
+static int scarlett2_mux_src_enum_ctl_put(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ struct usb_mixer_interface *mixer = elem->head.mixer;
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ int index = elem->control;
+ int oval, val, err = 0;
+
+ mutex_lock(&private->data_mutex);
+
+ oval = private->mux[index];
+ val = clamp(ucontrol->value.integer.value[0],
+ 0L, private->num_mux_srcs - 1L);
+
+ if (oval == val)
+ goto unlock;
+
+ private->mux[index] = val;
+ err = scarlett2_usb_set_mux(mixer);
+ if (err == 0)
+ err = 1;
+
+unlock:
+ mutex_unlock(&private->data_mutex);
+ return err;
+}
+
+static const struct snd_kcontrol_new scarlett2_mux_src_enum_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "",
+ .info = scarlett2_mux_src_enum_ctl_info,
+ .get = scarlett2_mux_src_enum_ctl_get,
+ .put = scarlett2_mux_src_enum_ctl_put,
+};
+
+static int scarlett2_add_mux_enums(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_ports *ports = private->info->ports;
+ int port_type, channel, i;
+
+ for (i = 0, port_type = 0;
+ port_type < SCARLETT2_PORT_TYPE_COUNT;
+ port_type++) {
+ for (channel = 0;
+ channel < ports[port_type].num[SCARLETT2_PORT_OUT];
+ channel++, i++) {
+ int err;
+ char s[SNDRV_CTL_ELEM_ID_NAME_MAXLEN];
+ const char *const descr = ports[port_type].dst_descr;
+
+ snprintf(s, sizeof(s) - 5, descr, channel + 1);
+ strcat(s, " Enum");
+
+ err = scarlett2_add_new_ctl(mixer,
+ &scarlett2_mux_src_enum_ctl,
+ i, 1, s, NULL);
+ if (err < 0)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/*** Meter Controls ***/
+
+static int scarlett2_meter_ctl_info(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_info *uinfo)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+
+ uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
+ uinfo->count = elem->channels;
+ uinfo->value.integer.min = 0;
+ uinfo->value.integer.max = 4095;
+ uinfo->value.integer.step = 1;
+ return 0;
+}
+
+static int scarlett2_meter_ctl_get(struct snd_kcontrol *kctl,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct usb_mixer_elem_info *elem = kctl->private_data;
+ u16 meter_levels[SCARLETT2_NUM_METERS];
+ int i, err;
+
+ err = scarlett2_usb_get_meter_levels(elem->head.mixer, meter_levels);
+ if (err < 0)
+ return err;
+
+ for (i = 0; i < elem->channels; i++)
+ ucontrol->value.integer.value[i] = meter_levels[i];
+
+ return 0;
+}
+
+static const struct snd_kcontrol_new scarlett2_meter_ctl = {
+ .iface = SNDRV_CTL_ELEM_IFACE_PCM,
+ .access = SNDRV_CTL_ELEM_ACCESS_READ | SNDRV_CTL_ELEM_ACCESS_VOLATILE,
+ .name = "",
+ .info = scarlett2_meter_ctl_info,
+ .get = scarlett2_meter_ctl_get
+};
+
+static int scarlett2_add_meter_ctl(struct usb_mixer_interface *mixer)
+{
+ return scarlett2_add_new_ctl(mixer, &scarlett2_meter_ctl,
+ 0, SCARLETT2_NUM_METERS,
+ "Level Meter", NULL);
+}
+
+/*** Cleanup/Suspend Callbacks ***/
+
+static void scarlett2_private_free(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ cancel_delayed_work_sync(&private->work);
+ kfree(private);
+ mixer->private_data = NULL;
+}
+
+static void scarlett2_private_suspend(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+
+ if (cancel_delayed_work_sync(&private->work))
+ scarlett2_config_save(private->mixer);
+}
+
+/*** Initialisation ***/
+
+static int scarlett2_count_mux_srcs(const struct scarlett2_ports *ports)
+{
+ int port_type, count = 0;
+
+ for (port_type = 0;
+ port_type < SCARLETT2_PORT_TYPE_COUNT;
+ port_type++)
+ count += ports[port_type].num[SCARLETT2_PORT_IN];
+
+ return count;
+}
+
+/* Default routing connects PCM outputs and inputs to Analogue,
+ * S/PDIF, then ADAT
+ */
+static void scarlett2_init_routing(u8 *mux,
+ const struct scarlett2_ports *ports)
+{
+ int i, input_num, input_count, port_type;
+ int output_num, output_count, port_type_connect_num;
+
+ static const int connect_order[] = {
+ SCARLETT2_PORT_TYPE_ANALOGUE,
+ SCARLETT2_PORT_TYPE_SPDIF,
+ SCARLETT2_PORT_TYPE_ADAT,
+ -1
+ };
+
+ /* Assign PCM inputs (routing outputs) */
+ output_num = scarlett2_get_port_start_num(ports,
+ SCARLETT2_PORT_OUT,
+ SCARLETT2_PORT_TYPE_PCM);
+ output_count = ports[SCARLETT2_PORT_TYPE_PCM].num[SCARLETT2_PORT_OUT];
+
+ for (port_type = connect_order[port_type_connect_num = 0];
+ port_type >= 0;
+ port_type = connect_order[++port_type_connect_num]) {
+ input_num = scarlett2_get_port_start_num(
+ ports, SCARLETT2_PORT_IN, port_type);
+ input_count = ports[port_type].num[SCARLETT2_PORT_IN];
+ for (i = 0;
+ i < input_count && output_count;
+ i++, output_count--)
+ mux[output_num++] = input_num++;
+ }
+
+ /* Assign PCM outputs (routing inputs) */
+ input_num = scarlett2_get_port_start_num(ports,
+ SCARLETT2_PORT_IN,
+ SCARLETT2_PORT_TYPE_PCM);
+ input_count = ports[SCARLETT2_PORT_TYPE_PCM].num[SCARLETT2_PORT_IN];
+
+ for (port_type = connect_order[port_type_connect_num = 0];
+ port_type >= 0;
+ port_type = connect_order[++port_type_connect_num]) {
+ output_num = scarlett2_get_port_start_num(
+ ports, SCARLETT2_PORT_OUT, port_type);
+ output_count = ports[port_type].num[SCARLETT2_PORT_OUT];
+ for (i = 0;
+ i < output_count && input_count;
+ i++, input_count--)
+ mux[output_num++] = input_num++;
+ }
+}
+
+/* Initialise private data, routing, sequence number */
+static int scarlett2_init_private(struct usb_mixer_interface *mixer,
+ const struct scarlett2_device_info *info)
+{
+ struct scarlett2_mixer_data *private =
+ kzalloc(sizeof(struct scarlett2_mixer_data), GFP_KERNEL);
+
+ if (!private)
+ return -ENOMEM;
+
+ mutex_init(&private->usb_mutex);
+ mutex_init(&private->data_mutex);
+ INIT_DELAYED_WORK(&private->work, scarlett2_config_save_work);
+ private->info = info;
+ private->num_mux_srcs = scarlett2_count_mux_srcs(info->ports);
+ private->scarlett2_seq = 0;
+ private->mixer = mixer;
+ mixer->private_data = private;
+ mixer->private_free = scarlett2_private_free;
+ mixer->private_suspend = scarlett2_private_suspend;
+
+ /* Setup default routing */
+ scarlett2_init_routing(private->mux, info->ports);
+
+ /* Initialise the sequence number used for the proprietary commands */
+ return scarlett2_usb(mixer, SCARLETT2_USB_INIT_SEQ, NULL, 0, NULL, 0);
+}
+
+/* Read line-in config and line-out volume settings on start */
+static int scarlett2_read_configs(struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_device_info *info = private->info;
+ const struct scarlett2_ports *ports = info->ports;
+ int num_line_out =
+ ports[SCARLETT2_PORT_TYPE_ANALOGUE].num[SCARLETT2_PORT_OUT];
+ u8 level_switches[SCARLETT2_LEVEL_SWITCH_MAX];
+ u8 pad_switches[SCARLETT2_PAD_SWITCH_MAX];
+ struct scarlett2_usb_volume_status volume_status;
+ int err, i;
+
+ if (info->level_input_count) {
+ err = scarlett2_usb_get_config(
+ mixer,
+ SCARLETT2_CONFIG_LEVEL_SWITCH,
+ info->level_input_count,
+ level_switches);
+ if (err < 0)
+ return err;
+ for (i = 0; i < info->level_input_count; i++)
+ private->level_switch[i] = level_switches[i];
+ }
+
+ if (info->pad_input_count) {
+ err = scarlett2_usb_get_config(
+ mixer,
+ SCARLETT2_CONFIG_PAD_SWITCH,
+ info->pad_input_count,
+ pad_switches);
+ if (err < 0)
+ return err;
+ for (i = 0; i < info->pad_input_count; i++)
+ private->pad_switch[i] = pad_switches[i];
+ }
+
+ err = scarlett2_usb_get_volume_status(mixer, &volume_status);
+ if (err < 0)
+ return err;
+
+ private->master_vol = clamp(
+ volume_status.master_vol + SCARLETT2_VOLUME_BIAS,
+ 0, SCARLETT2_VOLUME_BIAS);
+
+ for (i = 0; i < num_line_out; i++) {
+ int volume;
+
+ private->vol_sw_hw_switch[i] =
+ info->line_out_hw_vol
+ && volume_status.sw_hw_switch[i];
+
+ volume = private->vol_sw_hw_switch[i]
+ ? volume_status.master_vol
+ : volume_status.sw_vol[i];
+ volume = clamp(volume + SCARLETT2_VOLUME_BIAS,
+ 0, SCARLETT2_VOLUME_BIAS);
+ private->vol[i] = volume;
+ }
+
+ for (i = 0; i < info->button_count; i++)
+ private->buttons[i] = !!volume_status.buttons[i];
+
+ return 0;
+}
+
+/* Notify on volume change */
+static void scarlett2_mixer_interrupt_vol_change(
+ struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ const struct scarlett2_ports *ports = private->info->ports;
+ int num_line_out =
+ ports[SCARLETT2_PORT_TYPE_ANALOGUE].num[SCARLETT2_PORT_OUT];
+ int i;
+
+ private->vol_updated = 1;
+
+ snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->master_vol_ctl->id);
+
+ for (i = 0; i < num_line_out; i++) {
+ if (!private->vol_sw_hw_switch[i])
+ continue;
+ snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->vol_ctls[i]->id);
+ }
+}
+
+/* Notify on button change */
+static void scarlett2_mixer_interrupt_button_change(
+ struct usb_mixer_interface *mixer)
+{
+ struct scarlett2_mixer_data *private = mixer->private_data;
+ int i;
+
+ private->vol_updated = 1;
+
+ for (i = 0; i < private->info->button_count; i++)
+ snd_ctl_notify(mixer->chip->card, SNDRV_CTL_EVENT_MASK_VALUE,
+ &private->button_ctls[i]->id);
+}
+
+/* Interrupt callback */
+static void scarlett2_mixer_interrupt(struct urb *urb)
+{
+ struct usb_mixer_interface *mixer = urb->context;
+ int len = urb->actual_length;
+ int ustatus = urb->status;
+ u32 data;
+
+ if (ustatus != 0)
+ goto requeue;
+
+ if (len == 8) {
+ data = le32_to_cpu(*(u32 *)urb->transfer_buffer);
+ if (data & SCARLETT2_USB_INTERRUPT_VOL_CHANGE)
+ scarlett2_mixer_interrupt_vol_change(mixer);
+ if (data & SCARLETT2_USB_INTERRUPT_BUTTON_CHANGE)
+ scarlett2_mixer_interrupt_button_change(mixer);
+ } else {
+ usb_audio_err(mixer->chip,
+ "scarlett mixer interrupt length %d\n", len);
+ }
+
+requeue:
+ if (ustatus != -ENOENT &&
+ ustatus != -ECONNRESET &&
+ ustatus != -ESHUTDOWN) {
+ urb->dev = mixer->chip->dev;
+ usb_submit_urb(urb, GFP_ATOMIC);
+ }
+}
+
+static int scarlett2_mixer_status_create(struct usb_mixer_interface *mixer)
+{
+ struct usb_device *dev = mixer->chip->dev;
+ unsigned int pipe = usb_rcvintpipe(dev,
+ SCARLETT2_USB_INTERRUPT_ENDPOINT);
+ void *transfer_buffer;
+
+ if (mixer->urb) {
+ usb_audio_err(mixer->chip,
+ "%s: mixer urb already in use!\n", __func__);
+ return 0;
+ }
+
+ if (snd_usb_pipe_sanity_check(dev, pipe))
+ return -EINVAL;
+
+ mixer->urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!mixer->urb)
+ return -ENOMEM;
+
+ transfer_buffer = kmalloc(SCARLETT2_USB_INTERRUPT_MAX_DATA, GFP_KERNEL);
+ if (!transfer_buffer)
+ return -ENOMEM;
+
+ usb_fill_int_urb(mixer->urb, dev, pipe,
+ transfer_buffer, SCARLETT2_USB_INTERRUPT_MAX_DATA,
+ scarlett2_mixer_interrupt, mixer,
+ SCARLETT2_USB_INTERRUPT_INTERVAL);
+
+ return usb_submit_urb(mixer->urb, GFP_KERNEL);
+}
+
+/* Entry point */
+int snd_scarlett_gen2_controls_create(struct usb_mixer_interface *mixer)
+{
+ const struct scarlett2_device_info *info;
+ int err;
+
+ /* only use UAC_VERSION_2 */
+ if (!mixer->protocol)
+ return 0;
+
+ switch (mixer->chip->usb_id) {
+ case USB_ID(0x1235, 0x8203):
+ info = &s6i6_gen2_info;
+ break;
+ case USB_ID(0x1235, 0x8204):
+ info = &s18i8_gen2_info;
+ break;
+ case USB_ID(0x1235, 0x8201):
+ info = &s18i20_gen2_info;
+ break;
+ default: /* device not (yet) supported */
+ return -EINVAL;
+ }
+
+ if (!(mixer->chip->setup & SCARLETT2_ENABLE)) {
+ usb_audio_err(mixer->chip,
+ "Focusrite Scarlett Gen 2 Mixer Driver disabled; "
+ "use options snd_usb_audio device_setup=1 "
+ "to enable and report any issues to g@b4.vu");
+ return 0;
+ }
+
+ /* Initialise private data, routing, sequence number */
+ err = scarlett2_init_private(mixer, info);
+ if (err < 0)
+ return err;
+
+ /* Read volume levels and controls from the interface */
+ err = scarlett2_read_configs(mixer);
+ if (err < 0)
+ return err;
+
+ /* Create the analogue output controls */
+ err = scarlett2_add_line_out_ctls(mixer);
+ if (err < 0)
+ return err;
+
+ /* Create the analogue input controls */
+ err = scarlett2_add_line_in_ctls(mixer);
+ if (err < 0)
+ return err;
+
+ /* Create the input, output, and mixer mux input selections */
+ err = scarlett2_add_mux_enums(mixer);
+ if (err < 0)
+ return err;
+
+ /* Create the matrix mixer controls */
+ err = scarlett2_add_mixer_ctls(mixer);
+ if (err < 0)
+ return err;
+
+ /* Create the level meter controls */
+ err = scarlett2_add_meter_ctl(mixer);
+ if (err < 0)
+ return err;
+
+ /* Set up the interrupt polling if there are hardware buttons */
+ if (info->button_count) {
+ err = scarlett2_mixer_status_create(mixer);
+ if (err < 0)
+ return err;
+ }
+
+ return 0;
+}
projects / linux.git / commitdiff