]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
drm/i915: Leave FDI running after failed link training on LPT-H
authorVille Syrjälä <ville.syrjala@linux.intel.com>
Fri, 4 Dec 2015 20:22:50 +0000 (22:22 +0200)
committerVille Syrjälä <ville.syrjala@linux.intel.com>
Tue, 8 Dec 2015 14:30:21 +0000 (16:30 +0200)
Currently we disable some parts of FDI setup after a failed link
training. But despite that we continue with the modeset as if everything
is fine. This results in tons of noise from the state checker, and
it means we're not following the proper modeset sequence for the rest of
crtc enabling, nor for crtc disabling.

Ideally we should abort the modeset and follow the proper disable
sequence to shut off everything we enabled so far, but that would
require a big rework of the modeset code. So instead just leave FDI
up and running in its untrained state, and log an error. This is
what we do on older platforms too.

v2: Fix a typo in the commit message

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1449260570-14670-1-git-send-email-ville.syrjala@linux.intel.com
drivers/gpu/drm/i915/intel_ddi.c

index 7f618cf5289c057582c1d46eb8add302e469e96a..5d20c64d85669bc334b6dfb1405f5f26370f7681 100644 (file)
@@ -675,15 +675,16 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
                temp = I915_READ(DP_TP_STATUS(PORT_E));
                if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
                        DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
+                       break;
+               }
 
-                       /* Enable normal pixel sending for FDI */
-                       I915_WRITE(DP_TP_CTL(PORT_E),
-                                  DP_TP_CTL_FDI_AUTOTRAIN |
-                                  DP_TP_CTL_LINK_TRAIN_NORMAL |
-                                  DP_TP_CTL_ENHANCED_FRAME_ENABLE |
-                                  DP_TP_CTL_ENABLE);
-
-                       return;
+               /*
+                * Leave things enabled even if we failed to train FDI.
+                * Results in less fireworks from the state checker.
+                */
+               if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
+                       DRM_ERROR("FDI link training failed!\n");
+                       break;
                }
 
                temp = I915_READ(DDI_BUF_CTL(PORT_E));
@@ -712,7 +713,12 @@ void hsw_fdi_link_train(struct drm_crtc *crtc)
                POSTING_READ(FDI_RX_MISC(PIPE_A));
        }
 
-       DRM_ERROR("FDI link training failed!\n");
+       /* Enable normal pixel sending for FDI */
+       I915_WRITE(DP_TP_CTL(PORT_E),
+                  DP_TP_CTL_FDI_AUTOTRAIN |
+                  DP_TP_CTL_LINK_TRAIN_NORMAL |
+                  DP_TP_CTL_ENHANCED_FRAME_ENABLE |
+                  DP_TP_CTL_ENABLE);
 }
 
 void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)