+++ /dev/null
-/* Moorestown PMIC GPIO (access through IPC) driver
- * Copyright (c) 2008 - 2009, Intel Corporation.
- *
- * Author: Alek Du <alek.du@intel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-/* Supports:
- * Moorestown platform PMIC chip
- */
-
-#define pr_fmt(fmt) "%s: " fmt, __func__
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/stddef.h>
-#include <linux/slab.h>
-#include <linux/ioport.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio/driver.h>
-#include <asm/intel_scu_ipc.h>
-#include <linux/device.h>
-#include <linux/intel_pmic_gpio.h>
-#include <linux/platform_device.h>
-
-#define DRIVER_NAME "pmic_gpio"
-
-/* register offset that IPC driver should use
- * 8 GPIO + 8 GPOSW (6 controllable) + 8GPO
- */
-enum pmic_gpio_register {
- GPIO0 = 0xE0,
- GPIO7 = 0xE7,
- GPIOINT = 0xE8,
- GPOSWCTL0 = 0xEC,
- GPOSWCTL5 = 0xF1,
- GPO = 0xF4,
-};
-
-/* bits definition for GPIO & GPOSW */
-#define GPIO_DRV 0x01
-#define GPIO_DIR 0x02
-#define GPIO_DIN 0x04
-#define GPIO_DOU 0x08
-#define GPIO_INTCTL 0x30
-#define GPIO_DBC 0xc0
-
-#define GPOSW_DRV 0x01
-#define GPOSW_DOU 0x08
-#define GPOSW_RDRV 0x30
-
-#define GPIO_UPDATE_TYPE 0x80000000
-
-#define NUM_GPIO 24
-
-struct pmic_gpio {
- struct mutex buslock;
- struct gpio_chip chip;
- void *gpiointr;
- int irq;
- unsigned irq_base;
- unsigned int update_type;
- u32 trigger_type;
-};
-
-static void pmic_program_irqtype(int gpio, int type)
-{
- if (type & IRQ_TYPE_EDGE_RISING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x20, 0x20);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x20);
-
- if (type & IRQ_TYPE_EDGE_FALLING)
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x10, 0x10);
- else
- intel_scu_ipc_update_register(GPIO0 + gpio, 0x00, 0x10);
-};
-
-static int pmic_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
- if (offset >= 8) {
- pr_err("only pin 0-7 support input\n");
- return -1;/* we only have 8 GPIO can use as input */
- }
- return intel_scu_ipc_update_register(GPIO0 + offset,
- GPIO_DIR, GPIO_DIR);
-}
-
-static int pmic_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- int rc = 0;
-
- if (offset < 8)/* it is GPIO */
- rc = intel_scu_ipc_update_register(GPIO0 + offset,
- GPIO_DRV | (value ? GPIO_DOU : 0),
- GPIO_DRV | GPIO_DOU | GPIO_DIR);
- else if (offset < 16)/* it is GPOSW */
- rc = intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
- GPOSW_DRV | (value ? GPOSW_DOU : 0),
- GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV);
- else if (offset > 15 && offset < 24)/* it is GPO */
- rc = intel_scu_ipc_update_register(GPO,
- value ? 1 << (offset - 16) : 0,
- 1 << (offset - 16));
- else {
- pr_err("invalid PMIC GPIO pin %d!\n", offset);
- WARN_ON(1);
- }
-
- return rc;
-}
-
-static int pmic_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
- u8 r;
- int ret;
-
- /* we only have 8 GPIO pins we can use as input */
- if (offset >= 8)
- return -EOPNOTSUPP;
- ret = intel_scu_ipc_ioread8(GPIO0 + offset, &r);
- if (ret < 0)
- return ret;
- return r & GPIO_DIN;
-}
-
-static void pmic_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
-{
- if (offset < 8)/* it is GPIO */
- intel_scu_ipc_update_register(GPIO0 + offset,
- GPIO_DRV | (value ? GPIO_DOU : 0),
- GPIO_DRV | GPIO_DOU);
- else if (offset < 16)/* it is GPOSW */
- intel_scu_ipc_update_register(GPOSWCTL0 + offset - 8,
- GPOSW_DRV | (value ? GPOSW_DOU : 0),
- GPOSW_DRV | GPOSW_DOU | GPOSW_RDRV);
- else if (offset > 15 && offset < 24) /* it is GPO */
- intel_scu_ipc_update_register(GPO,
- value ? 1 << (offset - 16) : 0,
- 1 << (offset - 16));
-}
-
-/*
- * This is called from genirq with pg->buslock locked and
- * irq_desc->lock held. We can not access the scu bus here, so we
- * store the change and update in the bus_sync_unlock() function below
- */
-static int pmic_irq_type(struct irq_data *data, unsigned type)
-{
- struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
- u32 gpio = data->irq - pg->irq_base;
-
- if (gpio >= pg->chip.ngpio)
- return -EINVAL;
-
- pg->trigger_type = type;
- pg->update_type = gpio | GPIO_UPDATE_TYPE;
- return 0;
-}
-
-static int pmic_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct pmic_gpio *pg = gpiochip_get_data(chip);
-
- return pg->irq_base + offset;
-}
-
-static void pmic_bus_lock(struct irq_data *data)
-{
- struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
-
- mutex_lock(&pg->buslock);
-}
-
-static void pmic_bus_sync_unlock(struct irq_data *data)
-{
- struct pmic_gpio *pg = irq_data_get_irq_chip_data(data);
-
- if (pg->update_type) {
- unsigned int gpio = pg->update_type & ~GPIO_UPDATE_TYPE;
-
- pmic_program_irqtype(gpio, pg->trigger_type);
- pg->update_type = 0;
- }
- mutex_unlock(&pg->buslock);
-}
-
-/* the gpiointr register is read-clear, so just do nothing. */
-static void pmic_irq_unmask(struct irq_data *data) { }
-
-static void pmic_irq_mask(struct irq_data *data) { }
-
-static struct irq_chip pmic_irqchip = {
- .name = "PMIC-GPIO",
- .irq_mask = pmic_irq_mask,
- .irq_unmask = pmic_irq_unmask,
- .irq_set_type = pmic_irq_type,
- .irq_bus_lock = pmic_bus_lock,
- .irq_bus_sync_unlock = pmic_bus_sync_unlock,
-};
-
-static irqreturn_t pmic_irq_handler(int irq, void *data)
-{
- struct pmic_gpio *pg = data;
- u8 intsts = *((u8 *)pg->gpiointr + 4);
- int gpio;
- irqreturn_t ret = IRQ_NONE;
-
- for (gpio = 0; gpio < 8; gpio++) {
- if (intsts & (1 << gpio)) {
- pr_debug("pmic pin %d triggered\n", gpio);
- generic_handle_irq(pg->irq_base + gpio);
- ret = IRQ_HANDLED;
- }
- }
- return ret;
-}
-
-static int platform_pmic_gpio_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- int irq = platform_get_irq(pdev, 0);
- struct intel_pmic_gpio_platform_data *pdata = dev->platform_data;
-
- struct pmic_gpio *pg;
- int retval;
- int i;
-
- if (irq < 0) {
- dev_dbg(dev, "no IRQ line\n");
- return -EINVAL;
- }
-
- if (!pdata || !pdata->gpio_base || !pdata->irq_base) {
- dev_dbg(dev, "incorrect or missing platform data\n");
- return -EINVAL;
- }
-
- pg = kzalloc(sizeof(*pg), GFP_KERNEL);
- if (!pg)
- return -ENOMEM;
-
- dev_set_drvdata(dev, pg);
-
- pg->irq = irq;
- /* setting up SRAM mapping for GPIOINT register */
- pg->gpiointr = ioremap_nocache(pdata->gpiointr, 8);
- if (!pg->gpiointr) {
- pr_err("Can not map GPIOINT\n");
- retval = -EINVAL;
- goto err2;
- }
- pg->irq_base = pdata->irq_base;
- pg->chip.label = "intel_pmic";
- pg->chip.direction_input = pmic_gpio_direction_input;
- pg->chip.direction_output = pmic_gpio_direction_output;
- pg->chip.get = pmic_gpio_get;
- pg->chip.set = pmic_gpio_set;
- pg->chip.to_irq = pmic_gpio_to_irq;
- pg->chip.base = pdata->gpio_base;
- pg->chip.ngpio = NUM_GPIO;
- pg->chip.can_sleep = 1;
- pg->chip.parent = dev;
-
- mutex_init(&pg->buslock);
-
- pg->chip.parent = dev;
- retval = gpiochip_add_data(&pg->chip, pg);
- if (retval) {
- pr_err("Can not add pmic gpio chip\n");
- goto err;
- }
-
- retval = request_irq(pg->irq, pmic_irq_handler, 0, "pmic", pg);
- if (retval) {
- pr_warn("Interrupt request failed\n");
- goto fail_request_irq;
- }
-
- for (i = 0; i < 8; i++) {
- irq_set_chip_and_handler_name(i + pg->irq_base,
- &pmic_irqchip,
- handle_simple_irq,
- "demux");
- irq_set_chip_data(i + pg->irq_base, pg);
- }
- return 0;
-
-fail_request_irq:
- gpiochip_remove(&pg->chip);
-err:
- iounmap(pg->gpiointr);
-err2:
- kfree(pg);
- return retval;
-}
-
-/* at the same time, register a platform driver
- * this supports the sfi 0.81 fw */
-static struct platform_driver platform_pmic_gpio_driver = {
- .driver = {
- .name = DRIVER_NAME,
- },
- .probe = platform_pmic_gpio_probe,
-};
-
-static int __init platform_pmic_gpio_init(void)
-{
- return platform_driver_register(&platform_pmic_gpio_driver);
-}
-subsys_initcall(platform_pmic_gpio_init);
projects / linux.git / commitdiff