arm64: dts: meson-g12a-x96-max: Add support for Video Display

This patch adds the HDMI, CVBS and CEC attributes and nodes to support
full display on the X96 Max STB.

AO-CEC-B is used by default and AO-CEC-A is disabled.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
index b5b88262c06a398f078a13ed0a46f2a0d89b96f6..b3d913f28f1211785cb4ba0940fa641ce7cd5219 100644 (file)
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
@@ -24,6 +24,27 @@ memory@0 {
                reg = <0x0 0x0 0x0 0x40000000>;
        };
 
+       cvbs-connector {
+               compatible = "composite-video-connector";
+
+               port {
+                       cvbs_connector_in: endpoint {
+                               remote-endpoint = <&cvbs_vdac_out>;
+                       };
+               };
+       };
+
+       hdmi-connector {
+               compatible = "hdmi-connector";
+               type = "a";
+
+               port {
+                       hdmi_connector_in: endpoint {
+                               remote-endpoint = <&hdmi_tx_tmds_out>;
+                       };
+               };
+       };
+
        flash_1v8: regulator-flash_1v8 {
                compatible = "regulator-fixed";
                regulator-name = "FLASH_1V8";
@@ -90,6 +111,39 @@ vddao_3v3: regulator-vddao_3v3 {
        };
 };
 
+&cec_AO {
+       pinctrl-0 = <&cec_ao_a_h_pins>;
+       pinctrl-names = "default";
+       status = "disabled";
+       hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+       pinctrl-0 = <&cec_ao_b_h_pins>;
+       pinctrl-names = "default";
+       status = "okay";
+       hdmi-phandle = <&hdmi_tx>;
+};
+
+&cvbs_vdac_port {
+       cvbs_vdac_out: endpoint {
+               remote-endpoint = <&cvbs_connector_in>;
+       };
+};
+
+&hdmi_tx {
+       status = "okay";
+       pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+       pinctrl-names = "default";
+       hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+       hdmi_tx_tmds_out: endpoint {
+               remote-endpoint = <&hdmi_connector_in>;
+       };
+};
+
 &uart_A {
        status = "okay";
        pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;