]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
pinctrl: meson: fix uart_ao_b for GXBB and GXL/GXM
authorMartin Blumenstingl <martin.blumenstingl@googlemail.com>
Sun, 15 Jan 2017 22:20:28 +0000 (23:20 +0100)
committerLinus Walleij <linus.walleij@linaro.org>
Thu, 19 Jan 2017 09:36:25 +0000 (10:36 +0100)
The GXBB and GXL/GXM pinctrl drivers had a configuration which conflicts
with uart_ao_a. According to the GXBB ("S905") datasheet the AO UART
functions are:
- GPIOAO_0: Func1 = UART_TX_AO_A (bit 12), Func2 = UART_TX_AO_B (bit 26)
- GPIOAO_1: Func1 = UART_RX_AO_A (bit 11), Func2 = UART_RX_AO_B (bit 25)
- GPIOAO_4: Func2 = UART_TX_AO_B (bit 24)
- GPIOAO_5: Func2 = UART_RX_AO_B (bit 25)

The existing definition for uart_AO_A already uses GPIOAO_0 and GPIOAO_1.
The old definition of uart_AO_B however was broken, as it used GPIOAO_0
for TX (which would be fine) and two pins (GPIOAO_1 and GPIOAO_5) for RX
(which does not make any sense).

This fixes the uart_AO_B configuration by moving it to GPIOAO_4 and
GPIOAO_5 (it would be possible to use GPIOAO_0 and GPIOAO_1 in theory,
but all existing hardware uses uart_AO_A there).
The fix for GXBB and GXL/GXM is identical since it seems that these
specific pins are identical on both SoC variants.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
drivers/pinctrl/meson/pinctrl-meson-gxbb.c
drivers/pinctrl/meson/pinctrl-meson-gxl.c

index c3928aa3fefa9a1d24b0214e877bbac2bc15f67e..e0bca4df2a2f3188da0d559a29013893a5bea528 100644 (file)
@@ -253,9 +253,8 @@ static const unsigned int uart_tx_ao_a_pins[]       = { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]  = { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) };
-static const unsigned int uart_tx_ao_b_pins[]  = { PIN(GPIOAO_0, 0) };
-static const unsigned int uart_rx_ao_b_pins[]  = { PIN(GPIOAO_1, 0),
-                                                   PIN(GPIOAO_5, 0) };
+static const unsigned int uart_tx_ao_b_pins[]  = { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[]  = { PIN(GPIOAO_5, 0) };
 static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) };
 
@@ -498,7 +497,7 @@ static struct meson_pmx_group meson_gxbb_aobus_groups[] = {
        GPIO_GROUP(GPIOAO_13, 0),
 
        /* bank AO */
-       GROUP(uart_tx_ao_b,     0,      26),
+       GROUP(uart_tx_ao_b,     0,      24),
        GROUP(uart_rx_ao_b,     0,      25),
        GROUP(uart_tx_ao_a,     0,      12),
        GROUP(uart_rx_ao_a,     0,      11),
index 25694f7094c714bbf35eee2ae7b51e2b4ce5b1e9..b69743b07a1d591ace36d410583231319234d4f0 100644 (file)
@@ -214,9 +214,8 @@ static const unsigned int uart_tx_ao_a_pins[]       = { PIN(GPIOAO_0, 0) };
 static const unsigned int uart_rx_ao_a_pins[]  = { PIN(GPIOAO_1, 0) };
 static const unsigned int uart_cts_ao_a_pins[] = { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_a_pins[] = { PIN(GPIOAO_3, 0) };
-static const unsigned int uart_tx_ao_b_pins[]  = { PIN(GPIOAO_0, 0) };
-static const unsigned int uart_rx_ao_b_pins[]  = { PIN(GPIOAO_1, 0),
-                                                   PIN(GPIOAO_5, 0) };
+static const unsigned int uart_tx_ao_b_pins[]  = { PIN(GPIOAO_4, 0) };
+static const unsigned int uart_rx_ao_b_pins[]  = { PIN(GPIOAO_5, 0) };
 static const unsigned int uart_cts_ao_b_pins[] = { PIN(GPIOAO_2, 0) };
 static const unsigned int uart_rts_ao_b_pins[] = { PIN(GPIOAO_3, 0) };
 
@@ -409,7 +408,7 @@ static struct meson_pmx_group meson_gxl_aobus_groups[] = {
        GPIO_GROUP(GPIOAO_9, 0),
 
        /* bank AO */
-       GROUP(uart_tx_ao_b,     0,      26),
+       GROUP(uart_tx_ao_b,     0,      24),
        GROUP(uart_rx_ao_b,     0,      25),
        GROUP(uart_tx_ao_a,     0,      12),
        GROUP(uart_rx_ao_a,     0,      11),