ARM: dts: imx: ventana: cleanup pinctrl groups

Follow the conventions for pinctrl:
 - grouping pinctrl in logical alphabatized groups
 - remove any pinctrl not being used by a driver or needed by user
 - move iomuxc to bottom of file for readability

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>

diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index eb28f631279e5e595264a69d4dea8d5625ef01b8..822ffb231c57833dac53abdea3347f1369ee1bb5 100644 (file)
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -38,6 +38,8 @@ chosen {
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
 
                led0: user1 {
                        label = "user1";
@@ -65,6 +67,8 @@ memory {
 
        pps {
                compatible = "pps-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
                gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
@@ -337,27 +341,64 @@ touchscreen: egalax_ts@04 {
        };
 };
 
-&iomuxc {
+&ldb {
+       status = "okay";
+};
+
+&pcie {
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+       status = "okay";
+
+       eth1: sky2@8 { /* MAC/PHY on bus 8 */
+               compatible = "marvell,sky2";
+       };
+};
+
+&ssi1 {
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_hog>;
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
 
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};
+
+&iomuxc {
        imx6q-gw5400-a {
-               pinctrl_hog: hoggrp {
-                       fsl,pins = <
-                               MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x0001b0b0 /* OTG_PWR_EN */
-                               MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x0001b0b0 /* SPINOR_CS0# */
-                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0001b0b0 /* PCIE IRQ */
-                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x0001b0b0 /* PCIE RST */
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-                               MX6QDL_PAD_GPIO_5__GPIO1_IO05     0x0001b0b0 /* GPS_PPS */
-                               MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x0001b0b0 /* TOUCH_IRQ# */
-                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x0001b0b0 /* user1 led */
-                               MX6QDL_PAD_KEY_COL2__GPIO4_IO10   0x0001b0b0 /* user2 led */
-                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x0001b0b0 /* user3 led */
-                               MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x4001b0b0 /* USBHUB_RST# */
-                               MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x4001b0b0 /* MIPI_DIO */
-                        >;
-               };
 
                pinctrl_audmux: audmuxgrp {
                        fsl,pins = <
@@ -365,6 +406,7 @@ MX6QDL_PAD_SD2_DAT0__AUD4_RXD               0x130b0
                                MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
                                MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
                                MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
                        >;
                };
 
@@ -373,6 +415,7 @@ pinctrl_ecspi1: ecspi1grp {
                                MX6QDL_PAD_EIM_D17__ECSPI1_MISO         0x100b1
                                MX6QDL_PAD_EIM_D18__ECSPI1_MOSI         0x100b1
                                MX6QDL_PAD_EIM_D16__ECSPI1_SCLK         0x100b1
+                               MX6QDL_PAD_EIM_D19__GPIO3_IO19          0x1b0b0 /* SPINOR_CS0# */
                        >;
                };
 
@@ -397,6 +440,14 @@ MX6QDL_PAD_GPIO_16__ENET_REF_CLK   0x4001b0a8
                        >;
                };
 
+               pinctrl_gpio_leds: gpioledsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0 /* user1 led */
+                               MX6QDL_PAD_KEY_COL2__GPIO4_IO10         0x1b0b0 /* user2 led */
+                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0 /* user3 led */
+                       >;
+               };
+
                pinctrl_i2c1: i2c1grp {
                        fsl,pins = <
                                MX6QDL_PAD_EIM_D21__I2C1_SCL            0x4001b8b1
@@ -418,6 +469,19 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA                0x4001b8b1
                        >;
                };
 
+               pinctrl_pcie: pciegrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0 /* PCIE IRQ */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE RST */
+                       >;
+               };
+
+               pinctrl_pps: ppsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_5__GPIO1_IO05           0x1b0b0 /* GPS_PPS */
+                       >;
+               };
+
                pinctrl_uart1: uart1grp {
                        fsl,pins = <
                                MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
@@ -442,6 +506,7 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA  0x1b0b1
                pinctrl_usbotg: usbotggrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* OTG_PWR_EN */
                        >;
                };
 
@@ -457,59 +522,3 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3             0x17059
                };
        };
 };
-
-&ldb {
-       status = "okay";
-};
-
-&pcie {
-       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-       status = "okay";
-
-       eth1: sky2@8 { /* MAC/PHY on bus 8 */
-               compatible = "marvell,sky2";
-       };
-};
-
-&ssi1 {
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&uart5 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart5>;
-       status = "okay";
-};
-
-&usbotg {
-       vbus-supply = <&reg_usb_otg_vbus>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbotg>;
-       disable-over-current;
-       status = "okay";
-};
-
-&usbh1 {
-       vbus-supply = <&reg_usb_h1_vbus>;
-       status = "okay";
-};
-
-&usdhc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-       vmmc-supply = <&reg_3p3v>;
-       status = "okay";
-};

diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 2853a1046f8d351f1752714d57670b6c27b4ccd8..f2867c4b34a858c3b07fda639a123d9688708249 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -27,6 +27,8 @@ chosen {
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
 
                led0: user1 {
                        label = "user1";
@@ -48,6 +50,8 @@ memory {
 
        pps {
                compatible = "pps-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pps>;
                gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
@@ -163,24 +167,51 @@ &i2c3 {
        status = "okay";
 };
 
-&iomuxc {
+&pcie {
        pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_hog>;
+       pinctrl-0 = <&pinctrl_pcie>;
+       reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
 
-       imx6qdl-gw51xx {
-               pinctrl_hog: hoggrp {
-                       fsl,pins = <
-                               MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x4001b0b0 /* MEZZ_DIO0 */
-                               MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x4001b0b0 /* MEZZ_DIO1 */
-                               MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x0001b0b0 /* OTG_PWR_EN */
-                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b0b0 /* GPS_PPS */
-                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b0b0 /* PHY Reset */
-                               MX6QDL_PAD_GPIO_0__GPIO1_IO00    0x0001b0b0 /* PCIE_RST# */
-                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x0001b0b0 /* user1 led */
-                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x0001b0b0 /* user2 led */
-                        >;
-               };
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart3>;
+       status = "okay";
+};
 
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbh1 {
+       status = "okay";
+};
+
+&iomuxc {
+       imx6qdl-gw51xx {
                pinctrl_enet: enetgrp {
                        fsl,pins = <
                                MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b0b0
@@ -199,6 +230,14 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK       0x1b0b0
                                MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
                                MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
                                MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x1b0b0 /* PHY Reset */
+                       >;
+               };
+
+               pinctrl_gpio_leds: gpioledsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
+                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
                        >;
                };
 
@@ -244,6 +283,18 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA                0x4001b8b1
                        >;
                };
 
+               pinctrl_pcie: pciegrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_GPIO_0__GPIO1_IO00           0x1b0b0
+                       >;
+               };
+
+               pinctrl_pps: ppsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
+                       >;
+               };
+
                pinctrl_uart1: uart1grp {
                        fsl,pins = <
                                MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA      0x1b0b1
@@ -275,48 +326,8 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
                pinctrl_usbotg: usbotggrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* OTG_PWR_EN */
                        >;
                };
        };
 };
-
-&pcie {
-       reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart3>;
-       status = "okay";
-};
-
-&uart5 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart5>;
-       status = "okay";
-};
-
-&usbotg {
-       vbus-supply = <&reg_usb_otg_vbus>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbotg>;
-       disable-over-current;
-       status = "okay";
-};
-
-&usbh1 {
-       status = "okay";
-};

diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 26b13958f6635ecb5dc6b3012b676ade91ded89a..6d137b47068a176e7861b4f867fb141a600929cf 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -36,6 +36,8 @@ backlight {
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
 
                led0: user1 {
                        label = "user1";
@@ -63,6 +65,8 @@ memory {
 
        pps {
                compatible = "pps-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pps>;
                gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
@@ -233,39 +237,96 @@ touchscreen: egalax_ts@04 {
        };
 };
 
-&iomuxc {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_hog>;
+&ldb {
+       status = "okay";
 
-       imx6qdl-gw52xx {
-               pinctrl_hog: hoggrp {
-                       fsl,pins = <
-                               MX6QDL_PAD_EIM_A19__GPIO2_IO19   0x4001b0b0 /* MEZZ_DIO0 */
-                               MX6QDL_PAD_EIM_A20__GPIO2_IO18   0x4001b0b0 /* MEZZ_DIO1 */
-                               MX6QDL_PAD_EIM_D22__GPIO3_IO22   0x0001b0b0 /* OTG_PWR_EN */
-                               MX6QDL_PAD_EIM_D31__GPIO3_IO31   0x0001b0b0 /* VIDDEC_PDN# */
-                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x0001b0b0 /* PHY Reset */
-                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x0001b0b0 /* PCIE_RST# */
-                               MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x4001b0b0 /* GPS_PWDN */
-                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x0001b0b0 /* GPS_PPS */
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1     0x000130b0 /* AUD4_MCK */
-                               MX6QDL_PAD_GPIO_2__GPIO1_IO02    0x4001b0b0 /* USB_SEL_PCI */
-                               MX6QDL_PAD_GPIO_17__GPIO7_IO12   0x0001b0b0 /* TOUCH_IRQ# */
-                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x0001b0b0 /* user1 led */
-                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x0001b0b0 /* user2 led */
-                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x0001b0b0 /* user3 led */
-                               MX6QDL_PAD_SD2_CMD__GPIO1_IO11   0x0001b0b0 /* LVDS_TCH# */
-                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00  0x0001b0b0 /* SD3_CD# */
-                               MX6QDL_PAD_SD4_DAT3__GPIO2_IO11  0x4001b0b0 /* UART2_EN# */
-                        >;
+       lvds-channel@0 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: hsd100pxn1 {
+                               clock-frequency = <65000000>;
+                               hactive = <1024>;
+                               vactive = <768>;
+                               hback-porch = <220>;
+                               hfront-porch = <40>;
+                               vback-porch = <21>;
+                               vfront-porch = <7>;
+                               hsync-len = <60>;
+                               vsync-len = <10>;
+                       };
                };
+       };
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pcie>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+       status = "okay";
+};
+
+&pwm4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm4>;
+       status = "okay";
+};
+
+&ssi1 {
+       fsl,mode = "i2s-slave";
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
 
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbh1 {
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};
+
+&iomuxc {
+       imx6qdl-gw52xx {
                pinctrl_audmux: audmuxgrp {
                        fsl,pins = <
                                MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
                                MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
                                MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
                                MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0 /* AUD4_MCK */
                        >;
                };
 
@@ -287,6 +348,15 @@ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK       0x1b0b0
                                MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
                                MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
                                MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x4001b0a8
+                               MX6QDL_PAD_ENET_TXD0__GPIO1_IO30        0x1b0b0 /* PHY Reset */
+                       >;
+               };
+
+               pinctrl_gpio_leds: gpioledsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06  0x1b0b0
+                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07  0x1b0b0
+                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15  0x1b0b0
                        >;
                };
 
@@ -332,6 +402,18 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA                0x4001b8b1
                        >;
                };
 
+               pinctrl_pcie: pciegrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE_RST# */
+                       >;
+               };
+
+               pinctrl_pps: ppsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
+                       >;
+               };
+
                pinctrl_pwm4: pwm4grp {
                        fsl,pins = <
                                MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
@@ -362,6 +444,7 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA  0x1b0b1
                pinctrl_usbotg: usbotggrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0 /* OTG_PWR_EN */
                        >;
                };
 
@@ -373,85 +456,8 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0             0x17059
                                MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
                                MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
                                MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
+                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* CD */
                        >;
                };
        };
 };
-
-&ldb {
-       status = "okay";
-
-       lvds-channel@0 {
-               fsl,data-mapping = "spwg";
-               fsl,data-width = <18>;
-               status = "okay";
-
-               display-timings {
-                       native-mode = <&timing0>;
-                       timing0: hsd100pxn1 {
-                               clock-frequency = <65000000>;
-                               hactive = <1024>;
-                               vactive = <768>;
-                               hback-porch = <220>;
-                               hfront-porch = <40>;
-                               vback-porch = <21>;
-                               vfront-porch = <7>;
-                               hsync-len = <60>;
-                               vsync-len = <10>;
-                       };
-               };
-       };
-};
-
-&pcie {
-       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-       status = "okay";
-};
-
-&pwm4 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pwm4>;
-       status = "okay";
-};
-
-&ssi1 {
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&uart5 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart5>;
-       status = "okay";
-};
-
-&usbotg {
-       vbus-supply = <&reg_usb_otg_vbus>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbotg>;
-       disable-over-current;
-       status = "okay";
-};
-
-&usbh1 {
-       status = "okay";
-};
-
-&usdhc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-       vmmc-supply = <&reg_3p3v>;
-       status = "okay";
-};

diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index e6e298bb7576226c12755ec4ea50e3088980b98b..cade1bdc97e9b32b08c3971d55acfb8996439b86 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -37,6 +37,8 @@ backlight {
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
 
                led0: user1 {
                        label = "user1";
@@ -64,6 +66,8 @@ memory {
 
        pps {
                compatible = "pps-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pps>;
                gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
@@ -240,41 +244,101 @@ touchscreen: egalax_ts@04 {
        };
 };
 
-&iomuxc {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_hog>;
+&ldb {
+       status = "okay";
 
-       imx6qdl-gw53xx {
-               pinctrl_hog: hoggrp {
-                       fsl,pins = <
-                               MX6QDL_PAD_EIM_A19__GPIO2_IO19    0x4001b0b0 /* PCIE6EXP_DIO0 */
-                               MX6QDL_PAD_EIM_A20__GPIO2_IO18    0x4001b0b0 /* PCIE6EXP_DIO1 */
-                               MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x0001b0b0 /* OTG_PWR_EN */
-                               MX6QDL_PAD_ENET_RXD0__GPIO1_IO27  0x4001b0b0 /* GPS_SHDN */
-                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x0001b0b0 /* GPS_PPS */
-                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0001b0b0 /* PCIE IRQ */
-                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x0001b0b0 /* PCIE RST */
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-                               MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x4001b0b0 /* CAN_STBY */
-                               MX6QDL_PAD_GPIO_8__GPIO1_IO08     0x0001b0b0 /* PMIC_IRQ# */
-                               MX6QDL_PAD_GPIO_9__GPIO1_IO09     0x4001b0b0 /* HUB_RST# */
-                               MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x4001b0b0 /* PCIE_WDIS# */
-                               MX6QDL_PAD_GPIO_19__GPIO4_IO05    0x0001b0b0 /* ACCEL_IRQ# */
-                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x0001b0b0 /* user1 led */
-                               MX6QDL_PAD_KEY_COL4__GPIO4_IO14   0x0001b0b0 /* USBOTG_OC# */
-                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x0001b0b0 /* user2 led */
-                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x0001b0b0 /* user3 led */
-                               MX6QDL_PAD_SD2_CMD__GPIO1_IO11    0x0001b0b0 /* TOUCH_IRQ# */
-                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00   0x0001b0b0 /* SD3_DET# */
-                        >;
+       lvds-channel@1 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: hsd100pxn1 {
+                               clock-frequency = <65000000>;
+                               hactive = <1024>;
+                               vactive = <768>;
+                               hback-porch = <220>;
+                               hfront-porch = <40>;
+                               vback-porch = <21>;
+                               vfront-porch = <7>;
+                               hsync-len = <60>;
+                               vsync-len = <10>;
+                       };
                };
+       };
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pcie>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+       status = "okay";
+
+       eth1: sky2@8 { /* MAC/PHY on bus 8 */
+               compatible = "marvell,sky2";
+       };
+};
+
+&pwm4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm4>;
+       status = "okay";
+};
+
+&ssi1 {
+       fsl,mode = "i2s-slave";
+       status = "okay";
+};
 
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};
+
+&iomuxc {
+       imx6qdl-gw53xx {
                pinctrl_audmux: audmuxgrp {
                        fsl,pins = <
                                MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
                                MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
                                MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
                                MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
                        >;
                };
 
@@ -303,6 +367,15 @@ pinctrl_flexcan1: flexcan1grp {
                        fsl,pins = <
                                MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
                                MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
+                       >;
+               };
+
+               pinctrl_gpio_leds: gpioledsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x1b0b0
+                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x1b0b0
+                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x1b0b0
                        >;
                };
 
@@ -348,6 +421,19 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA                0x4001b8b1
                        >;
                };
 
+               pinctrl_pcie: pciegrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x1b0b0 /* PCIE RST */
+                       >;
+               };
+
+               pinctrl_pps: ppsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
+                       >;
+               };
+
                pinctrl_pwm4: pwm4grp {
                        fsl,pins = <
                                MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
@@ -378,6 +464,8 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA  0x1b0b1
                pinctrl_usbotg: usbotggrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
+                               MX6QDL_PAD_KEY_COL4__GPIO4_IO14         0x1b0b0 /* OC */
                        >;
                };
 
@@ -389,90 +477,8 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0             0x17059
                                MX6QDL_PAD_SD3_DAT1__SD3_DATA1          0x17059
                                MX6QDL_PAD_SD3_DAT2__SD3_DATA2          0x17059
                                MX6QDL_PAD_SD3_DAT3__SD3_DATA3          0x17059
+                               MX6QDL_PAD_SD3_DAT5__GPIO7_IO00         0x1b0b0 /* CD */
                        >;
                };
        };
 };
-
-&ldb {
-       status = "okay";
-
-       lvds-channel@1 {
-               fsl,data-mapping = "spwg";
-               fsl,data-width = <18>;
-               status = "okay";
-
-               display-timings {
-                       native-mode = <&timing0>;
-                       timing0: hsd100pxn1 {
-                               clock-frequency = <65000000>;
-                               hactive = <1024>;
-                               vactive = <768>;
-                               hback-porch = <220>;
-                               hfront-porch = <40>;
-                               vback-porch = <21>;
-                               vfront-porch = <7>;
-                               hsync-len = <60>;
-                               vsync-len = <10>;
-                       };
-               };
-       };
-};
-
-&pcie {
-       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-       status = "okay";
-
-       eth1: sky2@8 { /* MAC/PHY on bus 8 */
-               compatible = "marvell,sky2";
-       };
-};
-
-&pwm4 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pwm4>;
-       status = "okay";
-};
-
-&ssi1 {
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&uart5 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart5>;
-       status = "okay";
-};
-
-&usbotg {
-       vbus-supply = <&reg_usb_otg_vbus>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbotg>;
-       disable-over-current;
-       status = "okay";
-};
-
-&usbh1 {
-       vbus-supply = <&reg_usb_h1_vbus>;
-       status = "okay";
-};
-
-&usdhc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-       vmmc-supply = <&reg_3p3v>;
-       status = "okay";
-};

diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index a366a93325097e8829fe4ce442b46f33506424ef..cf13239a16190e4d50fe9a7088810eb45258f0a5 100644 (file)
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -37,6 +37,8 @@ backlight {
 
        leds {
                compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_gpio_leds>;
 
                led0: user1 {
                        label = "user1";
@@ -64,6 +66,8 @@ memory {
 
        pps {
                compatible = "pps-gpio";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_pps>;
                gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
                status = "okay";
        };
@@ -329,35 +333,106 @@ touchscreen: egalax_ts@04 {
        };
 };
 
-&iomuxc {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_hog>;
+&ldb {
+       status = "okay";
 
-       imx6qdl-gw54xx {
-               pinctrl_hog: hoggrp {
-                       fsl,pins = <
-                               MX6QDL_PAD_EIM_D22__GPIO3_IO22    0x0001b0b0 /* OTG_PWR_EN */
-                               MX6QDL_PAD_EIM_D19__GPIO3_IO19    0x0001b0b0 /* SPINOR_CS0# */
-                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26  0x0001b0b0 /* GPS_PPS */
-                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x0001b0b0 /* PCIE IRQ */
-                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29  0x0001b0b0 /* PCIE RST */
-                               MX6QDL_PAD_GPIO_0__CCM_CLKO1      0x000130b0 /* AUD4_MCK */
-                               MX6QDL_PAD_GPIO_2__GPIO1_IO02     0x4001b0b0 /* CAN_STBY */
-                               MX6QDL_PAD_GPIO_17__GPIO7_IO12    0x0001b0b0 /* TOUCH_IRQ# */
-                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06   0x0001b0b0 /* user1 led */
-                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07   0x0001b0b0 /* user2 led */
-                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15   0x0001b0b0 /* user3 led */
-                               MX6QDL_PAD_SD1_DAT0__GPIO1_IO16   0x4001b0b0 /* USBHUB_RST# */
-                               MX6QDL_PAD_SD1_DAT3__GPIO1_IO21   0x4001b0b0 /* MIPI_DIO */
-                        >;
+       lvds-channel@1 {
+               fsl,data-mapping = "spwg";
+               fsl,data-width = <18>;
+               status = "okay";
+
+               display-timings {
+                       native-mode = <&timing0>;
+                       timing0: hsd100pxn1 {
+                               clock-frequency = <65000000>;
+                               hactive = <1024>;
+                               vactive = <768>;
+                               hback-porch = <220>;
+                               hfront-porch = <40>;
+                               vback-porch = <21>;
+                               vfront-porch = <7>;
+                               hsync-len = <60>;
+                               vsync-len = <10>;
+                       };
                };
+       };
+};
+
+&pcie {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pcie>;
+       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
+       status = "okay";
+
+       eth1: sky2@8 { /* MAC/PHY on bus 8 */
+               compatible = "marvell,sky2";
+       };
+};
 
+&pwm4 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_pwm4>;
+       status = "okay";
+};
+
+&ssi1 {
+       fsl,mode = "i2s-slave";
+       status = "okay";
+};
+
+&ssi2 {
+       fsl,mode = "i2s-slave";
+       status = "okay";
+};
+
+&uart1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart1>;
+       status = "okay";
+};
+
+&uart2 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart2>;
+       status = "okay";
+};
+
+&uart5 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_uart5>;
+       status = "okay";
+};
+
+&usbotg {
+       vbus-supply = <&reg_usb_otg_vbus>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usbotg>;
+       disable-over-current;
+       status = "okay";
+};
+
+&usbh1 {
+       vbus-supply = <&reg_usb_h1_vbus>;
+       status = "okay";
+};
+
+&usdhc3 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&pinctrl_usdhc3>;
+       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
+       vmmc-supply = <&reg_3p3v>;
+       status = "okay";
+};
+
+&iomuxc {
+       imx6qdl-gw54xx {
                pinctrl_audmux: audmuxgrp {
                        fsl,pins = <
                                MX6QDL_PAD_SD2_DAT0__AUD4_RXD           0x130b0
                                MX6QDL_PAD_SD2_DAT3__AUD4_TXC           0x130b0
                                MX6QDL_PAD_SD2_DAT2__AUD4_TXD           0x110b0
                                MX6QDL_PAD_SD2_DAT1__AUD4_TXFS          0x130b0
+                               MX6QDL_PAD_GPIO_0__CCM_CLKO1            0x130b0 /* AUD4_MCK */
                        >;
                };
 
@@ -386,6 +461,15 @@ pinctrl_flexcan1: flexcan1grp {
                        fsl,pins = <
                                MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX        0x1b0b1
                                MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX        0x1b0b1
+                               MX6QDL_PAD_GPIO_2__GPIO1_IO02           0x4001b0b0 /* CAN_STBY */
+                       >;
+               };
+
+               pinctrl_gpio_leds: gpioledsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_KEY_COL0__GPIO4_IO06         0x1b0b0
+                               MX6QDL_PAD_KEY_ROW0__GPIO4_IO07         0x1b0b0
+                               MX6QDL_PAD_KEY_ROW4__GPIO4_IO15         0x1b0b0
                        >;
                };
 
@@ -431,6 +515,19 @@ MX6QDL_PAD_GPIO_6__I2C3_SDA                0x4001b8b1
                        >;
                };
 
+               pinctrl_pcie: pciegrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28       0x1b0b0 /* PCIE IRQ */
+                               MX6QDL_PAD_ENET_TXD1__GPIO1_IO29        0x1b0b0 /* PCIE RST */
+                       >;
+               };
+
+               pinctrl_pps: ppsgrp {
+                       fsl,pins = <
+                               MX6QDL_PAD_ENET_RXD1__GPIO1_IO26        0x1b0b1
+                       >;
+               };
+
                pinctrl_pwm4: pwm4grp {
                        fsl,pins = <
                                MX6QDL_PAD_SD1_CMD__PWM4_OUT            0x1b0b1
@@ -461,6 +558,7 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA  0x1b0b1
                pinctrl_usbotg: usbotggrp {
                        fsl,pins = <
                                MX6QDL_PAD_GPIO_1__USB_OTG_ID           0x17059
+                               MX6QDL_PAD_EIM_D22__GPIO3_IO22          0x1b0b0 /* PWR_EN */
                        >;
                };
 
@@ -476,90 +574,3 @@ MX6QDL_PAD_SD3_DAT3__SD3_DATA3             0x17059
                };
        };
 };
-
-&ldb {
-       status = "okay";
-
-       lvds-channel@1 {
-               fsl,data-mapping = "spwg";
-               fsl,data-width = <18>;
-               status = "okay";
-
-               display-timings {
-                       native-mode = <&timing0>;
-                       timing0: hsd100pxn1 {
-                               clock-frequency = <65000000>;
-                               hactive = <1024>;
-                               vactive = <768>;
-                               hback-porch = <220>;
-                               hfront-porch = <40>;
-                               vback-porch = <21>;
-                               vfront-porch = <7>;
-                               hsync-len = <60>;
-                               vsync-len = <10>;
-                       };
-               };
-       };
-};
-
-&pcie {
-       reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-       status = "okay";
-
-       eth1: sky2@8 { /* MAC/PHY on bus 8 */
-               compatible = "marvell,sky2";
-       };
-};
-
-&pwm4 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_pwm4>;
-       status = "okay";
-};
-
-&ssi1 {
-       status = "okay";
-};
-
-&ssi2 {
-       status = "okay";
-};
-
-&uart1 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart1>;
-       status = "okay";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&uart5 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart5>;
-       status = "okay";
-};
-
-&usbotg {
-       vbus-supply = <&reg_usb_otg_vbus>;
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usbotg>;
-       disable-over-current;
-       status = "okay";
-};
-
-&usbh1 {
-       vbus-supply = <&reg_usb_h1_vbus>;
-       status = "okay";
-};
-
-&usdhc3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_usdhc3>;
-       cd-gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-       vmmc-supply = <&reg_3p3v>;
-       status = "okay";
-};