staging: mt7621-pci: Fix spaces around parenthesis in pci-7621.c

Adds spaces before open parenthesis, and removes spaces after open parenthesis

Signed-off-by: Peter Vernia <peter.vernia@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/mt7621-pci/pci-mt7621.c b/drivers/staging/mt7621-pci/pci-mt7621.c
index b373d761312a38dcf9f7715a7793e88c054e7448..ded58bad08e71e12dc8198174f0fb5f372b3db49 100644 (file)
--- a/drivers/staging/mt7621-pci/pci-mt7621.c
+++ b/drivers/staging/mt7621-pci/pci-mt7621.c
@@ -139,14 +139,14 @@
                        rt_sysc_m32(0, val, RALINK_RSTCTRL);            \
                else                                                    \
                        rt_sysc_m32(val, 0, RALINK_RSTCTRL);            \
-       } while(0)
+       } while (0)
 #define DEASSERT_SYSRST_PCIE(val)      \
        do {                                                            \
                if (rt_sysc_r32(SYSC_REG_CHIP_REV) == 0x00030101)       \
                        rt_sysc_m32(val, 0, RALINK_RSTCTRL);            \
                else                                                    \
                        rt_sysc_m32(0, val, RALINK_RSTCTRL);            \
-       } while(0)
+       } while (0)
 #define RALINK_CLKCFG1                 0x30
 #define RALINK_RSTCTRL                 0x34
 #define RALINK_GPIOMODE                        0x60
@@ -195,7 +195,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
                                (func << 8) | (where & 0xfc) | 0x80000000;
        MV_WRITE(address_reg, address);
 
-       switch(access_type) {
+       switch (access_type) {
        case PCI_ACCESS_WRITE_1:
                MV_WRITE_8(data_reg+(where&0x3), *data);
                break;
@@ -206,7 +206,7 @@ static int config_access(unsigned char access_type, struct pci_bus *bus,
                MV_WRITE(data_reg, *data);
                break;
        case PCI_ACCESS_READ_1:
-               MV_READ_8( data_reg+(where&0x3), data);
+               MV_READ_8(data_reg+(where&0x3), data);
                break;
        case PCI_ACCESS_READ_2:
                MV_READ_16(data_reg+(where&0x3), data);
@@ -391,7 +391,7 @@ set_phy_for_ssc(void)
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  4, 1, 0x01);     // rg_pe1_frc_phy_en    //Force Port 1 enable control
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000),  5, 1, 0x00);     // rg_pe1_phy_en        //Port 0 disable
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100),  5, 1, 0x00);     // rg_pe1_phy_en        //Port 1 disable
-       if(reg <= 5 && reg >= 3) {      // 40MHz Xtal
+       if (reg <= 5 && reg >= 3) {     // 40MHz Xtal
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  6, 2, 0x01);     // RG_PE1_H_PLL_PREDIV  //Pre-divider ratio (for host mode)
                printk("***** Xtal 40MHz *****\n");
        } else {                        // 25MHz | 20MHz Xtal
@@ -414,7 +414,7 @@ set_phy_for_ssc(void)
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  8, 4, 0x01);     // RG_PE1_H_PLL_IC
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00);     // RG_PE1_H_PLL_BR
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490),  1, 3, 0x02);     // RG_PE1_PLL_DIVEN
-       if(reg <= 5 && reg >= 3) {      // 40MHz Xtal
+       if (reg <= 5 && reg >= 3) {     // 40MHz Xtal
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  6, 2, 0x01);     // rg_pe1_mstckdiv              //value of da_pe1_mstckdiv when force mode enable
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414),  5, 1, 0x01);     // rg_pe1_frc_mstckdiv  //force mode enable of da_pe1_mstckdiv
        }
@@ -430,7 +430,7 @@ set_phy_for_ssc(void)
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400),  9, 2, 0x00);       // rg_pe1_h_xtal_type
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  4, 1, 0x01);       // rg_pe1_frc_phy_en    //Force Port 0 enable control
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000),  5, 1, 0x00);       // rg_pe1_phy_en        //Port 0 disable
-       if(reg <= 5 && reg >= 3) {      // 40MHz Xtal
+       if (reg <= 5 && reg >= 3) {     // 40MHz Xtal
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x01);       // RG_PE1_H_PLL_PREDIV  //Pre-divider ratio (for host mode)
        } else {                        // 25MHz | 20MHz Xtal
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  6, 2, 0x00);       // RG_PE1_H_PLL_PREDIV  //Pre-divider ratio (for host mode)
@@ -449,7 +449,7 @@ set_phy_for_ssc(void)
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  8, 4, 0x01);       // RG_PE1_H_PLL_IC
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00);       // RG_PE1_H_PLL_BR
        set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490),  1, 3, 0x02);       // RG_PE1_PLL_DIVEN
-       if(reg <= 5 && reg >= 3) {      // 40MHz Xtal
+       if (reg <= 5 && reg >= 3) {     // 40MHz Xtal
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  6, 2, 0x01);       // rg_pe1_mstckdiv              //value of da_pe1_mstckdiv when force mode enable
                set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414),  5, 1, 0x01);       // rg_pe1_frc_mstckdiv  //force mode enable of da_pe1_mstckdiv
        }
@@ -532,7 +532,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
        *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7;             // set DATA
        mdelay(1000);
 
-       if(( RALINK_PCI0_STATUS & 0x1) == 0)
+       if ((RALINK_PCI0_STATUS & 0x1) == 0)
        {
                printk("PCIE0 no card, disable it(RST&CLK)\n");
                ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST);
@@ -543,7 +543,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
                RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt
        }
 
-       if(( RALINK_PCI1_STATUS & 0x1) == 0)
+       if ((RALINK_PCI1_STATUS & 0x1) == 0)
        {
                printk("PCIE1 no card, disable it(RST&CLK)\n");
                ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST);
@@ -554,7 +554,7 @@ static int mt7621_pci_probe(struct platform_device *pdev)
                RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt
        }
 
-       if (( RALINK_PCI2_STATUS & 0x1) == 0) {
+       if ((RALINK_PCI2_STATUS & 0x1) == 0) {
                printk("PCIE2 no card, disable it(RST&CLK)\n");
                ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST);
                rt_sysc_m32(RALINK_PCIE2_CLK_EN, 0, RALINK_CLKCFG1);
@@ -578,7 +578,7 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
 3'b110                 1               0               x
 3'b111                 2               1               0
 */
-       switch(pcie_link_status) {
+       switch (pcie_link_status) {
        case 2:
                RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000;
                RALINK_PCI_PCICFG_ADDR |= 0x1 << 16;    //port0
@@ -613,7 +613,7 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
        RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE;
 
        //PCIe0
-       if((pcie_link_status & 0x1) != 0) {
+       if ((pcie_link_status & 0x1) != 0) {
                RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001;        //open 7FFF:2G; ENABLE
                RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE;
                RALINK_PCI0_CLASS = 0x06040001;
@@ -636,7 +636,7 @@ pcie(2/1/0) link status     pcie2_num       pcie1_num       pcie0_num
                printk("PCIE2 enabled\n");
        }
 
-       switch(pcie_link_status) {
+       switch (pcie_link_status) {
        case 7:
                read_config(0, 2, 0, 0x4, &val);
                write_config(0, 2, 0, 0x4, val|0x4);