]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
ARM: integrator: define clocks in the device trees
authorLinus Walleij <linus.walleij@linaro.org>
Fri, 10 Jan 2014 14:56:05 +0000 (15:56 +0100)
committerLinus Walleij <linus.walleij@linaro.org>
Thu, 13 Feb 2014 10:20:31 +0000 (11:20 +0100)
This adds the clock definitions to the Integrator/CP
and Integrator/AP device trees.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
arch/arm/boot/dts/integratorap.dts
arch/arm/boot/dts/integratorcp.dts

index e6be9315ff0a54033e07daba296399b8f45112ca..b10e6351da53f229a93488b34b832ea928531875 100644 (file)
@@ -18,6 +18,28 @@ chosen {
                bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk";
        };
 
+       /* 24 MHz chrystal on the core module */
+       xtal24mhz: xtal24mhz@24M {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+       };
+
+       pclk: pclk@0 {
+               #clock-cells = <0>;
+               compatible = "fixed-factor-clock";
+               clock-div = <1>;
+               clock-mult = <1>;
+               clocks = <&xtal24mhz>;
+       };
+
+       /* The UART clock is 14.74 MHz divided by an ICS525 */
+       uartclk: uartclk@14.74M {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <14745600>;
+       };
+
        syscon {
                compatible = "arm,integrator-ap-syscon";
                reg = <0x11000000 0x100>;
@@ -28,14 +50,17 @@ syscon {
 
        timer0: timer@13000000 {
                compatible = "arm,integrator-timer";
+               clocks = <&xtal24mhz>;
        };
 
        timer1: timer@13000100 {
                compatible = "arm,integrator-timer";
+               clocks = <&xtal24mhz>;
        };
 
        timer2: timer@13000200 {
                compatible = "arm,integrator-timer";
+               clocks = <&xtal24mhz>;
        };
 
        pic: pic@14000000 {
@@ -92,26 +117,36 @@ fpga {
                rtc: rtc@15000000 {
                        compatible = "arm,pl030", "arm,primecell";
                        arm,primecell-periphid = <0x00041030>;
+                       clocks = <&pclk>;
+                       clock-names = "apb_pclk";
                };
 
                uart0: uart@16000000 {
                        compatible = "arm,pl010", "arm,primecell";
                        arm,primecell-periphid = <0x00041010>;
+                       clocks = <&uartclk>, <&pclk>;
+                       clock-names = "uartclk", "apb_pclk";
                };
 
                uart1: uart@17000000 {
                        compatible = "arm,pl010", "arm,primecell";
                        arm,primecell-periphid = <0x00041010>;
+                       clocks = <&uartclk>, <&pclk>;
+                       clock-names = "uartclk", "apb_pclk";
                };
 
                kmi0: kmi@18000000 {
                        compatible = "arm,pl050", "arm,primecell";
                        arm,primecell-periphid = <0x00041050>;
+                       clocks = <&xtal24mhz>, <&pclk>;
+                       clock-names = "KMIREFCLK", "apb_pclk";
                };
 
                kmi1: kmi@19000000 {
                        compatible = "arm,pl050", "arm,primecell";
                        arm,primecell-periphid = <0x00041050>;
+                       clocks = <&xtal24mhz>, <&pclk>;
+                       clock-names = "KMIREFCLK", "apb_pclk";
                };
        };
 };
index a21c17de9a5e9bcc8f1974deae775faa48aafd14..d43f15b4f79a242d2437f6ea45626556380c010c 100644 (file)
@@ -13,25 +13,107 @@ chosen {
                bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk";
        };
 
+       /*
+        * The Integrator/CP overall clocking architecture can be found in
+        * ARM DUI 0184B page 7-28 "Integrator/CP922T system clocks" which
+        * appear to illustrate the layout used in most configurations.
+        */
+
+       /* The codec chrystal operates at 24.576 MHz */
+       xtal_codec: xtal24.576@24.576M {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <24576000>;
+       };
+
+       /* The chrystal is divided by 2 by the codec for the AACI bit clock */
+       aaci_bitclk: aaci_bitclk@12.288M {
+               #clock-cells = <0>;
+               compatible = "fixed-factor-clock";
+               clock-div = <2>;
+               clock-mult = <1>;
+               clocks = <&xtal_codec>;
+       };
+
+       /* This is a 25MHz chrystal on the base board */
+       xtal25mhz: xtal25mhz@25M {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <25000000>;
+       };
+
+       /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */
+       uartclk: uartclk@14.74M {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <14745600>;
+       };
+
+       /* Actually sysclk I think */
+       pclk: pclk@0 {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <0>;
+       };
+
+       core-module@10000000 {
+               /* 24 MHz chrystal on the core module */
+               xtal24mhz: xtal24mhz@24M {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <24000000>;
+               };
+
+               /*
+                * External oscillator on the core module, usually used
+                * to drive video circuitry. Driven from the 24MHz clock.
+                */
+               auxosc: cm_aux_osc@25M {
+                       #clock-cells = <0>;
+                       compatible = "arm,integrator-cm-auxosc";
+                       clocks = <&xtal24mhz>;
+               };
+
+               /* The KMI clock is the 24 MHz oscillator divided to 8MHz */
+               kmiclk: kmiclk@1M {
+                       #clock-cells = <0>;
+                       compatible = "fixed-factor-clock";
+                       clock-div = <3>;
+                       clock-mult = <1>;
+                       clocks = <&xtal24mhz>;
+               };
+
+               /* The timer clock is the 24 MHz oscillator divided to 1MHz */
+               timclk: timclk@1M {
+                       #clock-cells = <0>;
+                       compatible = "fixed-factor-clock";
+                       clock-div = <24>;
+                       clock-mult = <1>;
+                       clocks = <&xtal24mhz>;
+               };
+       };
+
        syscon {
                compatible = "arm,integrator-cp-syscon";
                reg = <0xcb000000 0x100>;
        };
 
        timer0: timer@13000000 {
-               /* TIMER0 runs @ 25MHz */
+               /* TIMER0 runs directly on the 25MHz chrystal */
                compatible = "arm,integrator-cp-timer";
-               status = "disabled";
+               clocks = <&xtal25mhz>;
        };
 
        timer1: timer@13000100 {
                /* TIMER1 runs @ 1MHz */
                compatible = "arm,integrator-cp-timer";
+               clocks = <&timclk>;
        };
 
        timer2: timer@13000200 {
                /* TIMER2 runs @ 1MHz */
                compatible = "arm,integrator-cp-timer";
+               clocks = <&timclk>;
        };
 
        pic: pic@14000000 {
@@ -74,22 +156,32 @@ fpga {
                 */
                rtc@15000000 {
                        compatible = "arm,pl031", "arm,primecell";
+                       clocks = <&pclk>;
+                       clock-names = "apb_pclk";
                };
 
                uart@16000000 {
                        compatible = "arm,pl011", "arm,primecell";
+                       clocks = <&uartclk>, <&pclk>;
+                       clock-names = "uartclk", "apb_pclk";
                };
 
                uart@17000000 {
                        compatible = "arm,pl011", "arm,primecell";
+                       clocks = <&uartclk>, <&pclk>;
+                       clock-names = "uartclk", "apb_pclk";
                };
 
                kmi@18000000 {
                        compatible = "arm,pl050", "arm,primecell";
+                       clocks = <&kmiclk>, <&pclk>;
+                       clock-names = "KMIREFCLK", "apb_pclk";
                };
 
                kmi@19000000 {
                        compatible = "arm,pl050", "arm,primecell";
+                       clocks = <&kmiclk>, <&pclk>;
+                       clock-names = "KMIREFCLK", "apb_pclk";
                };
 
                /*
@@ -100,18 +192,24 @@ mmc@1c000000 {
                        reg = <0x1c000000 0x1000>;
                        interrupts = <23 24>;
                        max-frequency = <515633>;
+                       clocks = <&uartclk>, <&pclk>;
+                       clock-names = "mclk", "apb_pclk";
                };
 
                aaci@1d000000 {
                        compatible = "arm,pl041", "arm,primecell";
                        reg = <0x1d000000 0x1000>;
                        interrupts = <25>;
+                       clocks = <&pclk>;
+                       clock-names = "apb_pclk";
                };
 
                clcd@c0000000 {
                        compatible = "arm,pl110", "arm,primecell";
                        reg = <0xC0000000 0x1000>;
                        interrupts = <22>;
+                       clocks = <&auxosc>, <&pclk>;
+                       clock-names = "clcd", "apb_pclk";
                };
        };
 };