PM / devfreq: exynos4: use common PPMU code

This patch converts exynos4_bus driver to use common PPMU code
(exynos_ppmu.c) instead of individual functions related to PPC
because PPMU is integrated module with both PPC and Bus event
generator.  When using PPMU to get bus performance read/write
event exynos4_bus driver deson't need to consider memory type.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[bzolnier: splitted out changes from the bigger patch]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>

diff --git a/drivers/devfreq/exynos/Makefile b/drivers/devfreq/exynos/Makefile
index bfaaf5b0d61d3c45723a169ce176912c6c7ad32c..49bc9175f923539b9ad2f887f77ab88891dfc530 100644 (file)
--- a/drivers/devfreq/exynos/Makefile
+++ b/drivers/devfreq/exynos/Makefile
@@ -1,3 +1,3 @@
 # Exynos DEVFREQ Drivers
-obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)  += exynos4_bus.o
+obj-$(CONFIG_ARM_EXYNOS4_BUS_DEVFREQ)  += exynos_ppmu.o exynos4_bus.o
 obj-$(CONFIG_ARM_EXYNOS5_BUS_DEVFREQ)  += exynos_ppmu.o exynos5_bus.o

diff --git a/drivers/devfreq/exynos/exynos4_bus.c b/drivers/devfreq/exynos/exynos4_bus.c
index 5a48d162b2284e694374357be66a94952171e9ae..228c658c0e8ce8e04df156e5a5daccffaa113a71 100644 (file)
--- a/drivers/devfreq/exynos/exynos4_bus.c
+++ b/drivers/devfreq/exynos/exynos4_bus.c
@@ -25,15 +25,16 @@
 #include <linux/regulator/consumer.h>
 #include <linux/module.h>
 
+#include <mach/map.h>
+
+#include "exynos_ppmu.h"
+#include "exynos4_bus.h"
+
 /* Exynos4 ASV has been in the mailing list, but not upstreamed, yet. */
 #ifdef CONFIG_EXYNOS_ASV
 extern unsigned int exynos_result_of_asv;
 #endif
 
-#include <mach/map.h>
-
-#include "exynos4_bus.h"
-
 #define MAX_SAFEVOLT   1200000 /* 1.2V */
 
 enum exynos4_busf_type {
@@ -44,22 +45,6 @@ enum exynos4_busf_type {
 /* Assume that the bus is saturated if the utilization is 40% */
 #define BUS_SATURATION_RATIO   40
 
-enum ppmu_counter {
-       PPMU_PMNCNT0 = 0,
-       PPMU_PMCCNT1,
-       PPMU_PMNCNT2,
-       PPMU_PMNCNT3,
-       PPMU_PMNCNT_MAX,
-};
-struct exynos4_ppmu {
-       void __iomem *hw_base;
-       unsigned int ccnt;
-       unsigned int event;
-       unsigned int count[PPMU_PMNCNT_MAX];
-       bool ccnt_overflow;
-       bool count_overflow[PPMU_PMNCNT_MAX];
-};
-
 enum busclk_level_idx {
        LV_0 = 0,
        LV_1,
@@ -68,6 +53,13 @@ enum busclk_level_idx {
        LV_4,
        _LV_END
 };
+
+enum exynos_ppmu_idx {
+       PPMU_DMC0,
+       PPMU_DMC1,
+       PPMU_END,
+};
+
 #define EX4210_LV_MAX  LV_2
 #define EX4x12_LV_MAX  LV_4
 #define EX4210_LV_NUM  (LV_2 + 1)
@@ -91,7 +83,7 @@ struct busfreq_data {
        struct regulator *vdd_int;
        struct regulator *vdd_mif; /* Exynos4412/4212 only */
        struct busfreq_opp_info curr_oppinfo;
-       struct exynos4_ppmu dmc[2];
+       struct exynos_ppmu ppmu[PPMU_END];
 
        struct notifier_block pm_notifier;
        struct mutex lock;
@@ -101,12 +93,6 @@ struct busfreq_data {
        unsigned int top_divtable[_LV_END];
 };
 
-struct bus_opp_table {
-       unsigned int idx;
-       unsigned long clk;
-       unsigned long volt;
-};
-
 /* 4210 controls clock of mif and voltage of int */
 static struct bus_opp_table exynos4210_busclk_table[] = {
        {LV_0, 400000, 1150000},
@@ -524,27 +510,22 @@ static int exynos4x12_set_busclk(struct busfreq_data *data,
        return 0;
 }
 
-
 static void busfreq_mon_reset(struct busfreq_data *data)
 {
        unsigned int i;
 
-       for (i = 0; i < 2; i++) {
-               void __iomem *ppmu_base = data->dmc[i].hw_base;
+       for (i = 0; i < PPMU_END; i++) {
+               void __iomem *ppmu_base = data->ppmu[i].hw_base;
 
-               /* Reset PPMU */
-               __raw_writel(0x8000000f, ppmu_base + 0xf010);
-               __raw_writel(0x8000000f, ppmu_base + 0xf050);
-               __raw_writel(0x6, ppmu_base + 0xf000);
-               __raw_writel(0x0, ppmu_base + 0xf100);
+               /* Reset the performance and cycle counters */
+               exynos_ppmu_reset(ppmu_base);
 
-               /* Set PPMU Event */
-               data->dmc[i].event = 0x6;
-               __raw_writel(((data->dmc[i].event << 12) | 0x1),
-                            ppmu_base + 0xfc);
+               /* Setup count registers to monitor read/write transactions */
+               data->ppmu[i].event[PPMU_PMNCNT3] = RDWR_DATA_COUNT;
+               exynos_ppmu_setevent(ppmu_base, PPMU_PMNCNT3,
+                                       data->ppmu[i].event[PPMU_PMNCNT3]);
 
-               /* Start PPMU */
-               __raw_writel(0x1, ppmu_base + 0xf000);
+               exynos_ppmu_start(ppmu_base);
        }
 }
 
@@ -552,23 +533,20 @@ static void exynos4_read_ppmu(struct busfreq_data *data)
 {
        int i, j;
 
-       for (i = 0; i < 2; i++) {
-               void __iomem *ppmu_base = data->dmc[i].hw_base;
-               u32 overflow;
+       for (i = 0; i < PPMU_END; i++) {
+               void __iomem *ppmu_base = data->ppmu[i].hw_base;
 
-               /* Stop PPMU */
-               __raw_writel(0x0, ppmu_base + 0xf000);
+               exynos_ppmu_stop(ppmu_base);
 
                /* Update local data from PPMU */
-               overflow = __raw_readl(ppmu_base + 0xf050);
-
-               data->dmc[i].ccnt = __raw_readl(ppmu_base + 0xf100);
-               data->dmc[i].ccnt_overflow = overflow & (1 << 31);
-
-               for (j = 0; j < PPMU_PMNCNT_MAX; j++) {
-                       data->dmc[i].count[j] = __raw_readl(
-                                       ppmu_base + (0xf110 + (0x10 * j)));
-                       data->dmc[i].count_overflow[j] = overflow & (1 << j);
+               data->ppmu[i].ccnt = __raw_readl(ppmu_base + PPMU_CCNT);
+
+               for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+                       if (data->ppmu[i].event[j] == 0)
+                               data->ppmu[i].count[j] = 0;
+                       else
+                               data->ppmu[i].count[j] =
+                                       exynos_ppmu_read(ppmu_base, j);
                }
        }
 
@@ -698,66 +676,42 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
        return err;
 }
 
-static int exynos4_get_busier_dmc(struct busfreq_data *data)
+static int exynos4_get_busier_ppmu(struct busfreq_data *data)
 {
-       u64 p0 = data->dmc[0].count[0];
-       u64 p1 = data->dmc[1].count[0];
-
-       p0 *= data->dmc[1].ccnt;
-       p1 *= data->dmc[0].ccnt;
-
-       if (data->dmc[1].ccnt == 0)
-               return 0;
+       int i, j;
+       int busy = 0;
+       unsigned int temp = 0;
+
+       for (i = 0; i < PPMU_END; i++) {
+               for (j = PPMU_PMNCNT0; j < PPMU_PMNCNT_MAX; j++) {
+                       if (data->ppmu[i].count[j] > temp) {
+                               temp = data->ppmu[i].count[j];
+                               busy = i;
+                       }
+               }
+       }
 
-       if (p0 > p1)
-               return 0;
-       return 1;
+       return busy;
 }
 
 static int exynos4_bus_get_dev_status(struct device *dev,
                                      struct devfreq_dev_status *stat)
 {
        struct busfreq_data *data = dev_get_drvdata(dev);
-       int busier_dmc;
-       int cycles_x2 = 2; /* 2 x cycles */
-       void __iomem *addr;
-       u32 timing;
-       u32 memctrl;
+       int busier;
 
        exynos4_read_ppmu(data);
-       busier_dmc = exynos4_get_busier_dmc(data);
+       busier = exynos4_get_busier_ppmu(data);
        stat->current_frequency = data->curr_oppinfo.rate;
 
-       if (busier_dmc)
-               addr = S5P_VA_DMC1;
-       else
-               addr = S5P_VA_DMC0;
-
-       memctrl = __raw_readl(addr + 0x04); /* one of DDR2/3/LPDDR2 */
-       timing = __raw_readl(addr + 0x38); /* CL or WL/RL values */
-
-       switch ((memctrl >> 8) & 0xf) {
-       case 0x4: /* DDR2 */
-               cycles_x2 = ((timing >> 16) & 0xf) * 2;
-               break;
-       case 0x5: /* LPDDR2 */
-       case 0x6: /* DDR3 */
-               cycles_x2 = ((timing >> 8) & 0xf) + ((timing >> 0) & 0xf);
-               break;
-       default:
-               pr_err("%s: Unknown Memory Type(%d).\n", __func__,
-                      (memctrl >> 8) & 0xf);
-               return -EINVAL;
-       }
-
        /* Number of cycles spent on memory access */
-       stat->busy_time = data->dmc[busier_dmc].count[0] / 2 * (cycles_x2 + 2);
+       stat->busy_time = data->ppmu[busier].count[PPMU_PMNCNT3];
        stat->busy_time *= 100 / BUS_SATURATION_RATIO;
-       stat->total_time = data->dmc[busier_dmc].ccnt;
+       stat->total_time = data->ppmu[busier].ccnt;
 
        /* If the counters have overflown, retry */
-       if (data->dmc[busier_dmc].ccnt_overflow ||
-           data->dmc[busier_dmc].count_overflow[0])
+       if (data->ppmu[busier].ccnt_overflow ||
+           data->ppmu[busier].count_overflow[0])
                return -EAGAIN;
 
        return 0;
@@ -1023,8 +977,8 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
        }
 
        data->type = pdev->id_entry->driver_data;
-       data->dmc[0].hw_base = S5P_VA_DMC0;
-       data->dmc[1].hw_base = S5P_VA_DMC1;
+       data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0;
+       data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1;
        data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
        data->dev = dev;
        mutex_init(&data->lock);
@@ -1074,13 +1028,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
 
        platform_set_drvdata(pdev, data);
 
-       busfreq_mon_reset(data);
-
        data->devfreq = devfreq_add_device(dev, &exynos4_devfreq_profile,
                                           "simple_ondemand", NULL);
        if (IS_ERR(data->devfreq))
                return PTR_ERR(data->devfreq);
 
+       /*
+        * Start PPMU (Performance Profiling Monitoring Unit) to check
+        * utilization of each IP in the Exynos4 SoC.
+        */
+       busfreq_mon_reset(data);
+
        /* Register opp_notifier for Exynos4 busfreq */
        err = devfreq_register_opp_notifier(dev, data->devfreq);
        if (err < 0) {