struct usb_serial_port *port, struct ktermios *old_termios);
static void edge_send(struct usb_serial_port *port, struct tty_struct *tty);
+static int do_download_mode(struct edgeport_serial *serial,
+ const struct firmware *fw);
+static int do_boot_mode(struct edgeport_serial *serial,
+ const struct firmware *fw);
+
/* sysfs attributes */
static int edge_create_sysfs_attrs(struct usb_serial_port *port);
static int edge_remove_sysfs_attrs(struct usb_serial_port *port);
{
struct device *dev = &serial->serial->interface->dev;
int status = 0;
- int start_address;
- struct edge_ti_manuf_descriptor *ti_manuf_desc;
struct usb_interface_descriptor *interface;
- int download_cur_ver;
- int download_new_ver;
struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
if (check_fw_sanity(serial, fw))
* if we have more than one endpoint we are definitely in download
* mode
*/
- if (interface->bNumEndpoints > 1)
+ if (interface->bNumEndpoints > 1) {
serial->product_info.TiMode = TI_MODE_DOWNLOAD;
- else
- /* Otherwise we will remain in configuring mode */
- serial->product_info.TiMode = TI_MODE_CONFIGURING;
+ return do_download_mode(serial, fw);
+ }
- /********************************************************************/
- /* Download Mode */
- /********************************************************************/
- if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) {
- struct ti_i2c_desc *rom_desc;
+ /* Otherwise we will remain in configuring mode */
+ serial->product_info.TiMode = TI_MODE_CONFIGURING;
+ return do_boot_mode(serial, fw);
- dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__);
+}
- status = check_i2c_image(serial);
- if (status) {
- dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__);
- return status;
- }
+static int do_download_mode(struct edgeport_serial *serial,
+ const struct firmware *fw)
+{
+ struct device *dev = &serial->serial->interface->dev;
+ int status = 0;
+ int start_address;
+ struct edge_ti_manuf_descriptor *ti_manuf_desc;
+ int download_cur_ver;
+ int download_new_ver;
+ struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+ struct ti_i2c_desc *rom_desc;
- /* Validate Hardware version number
- * Read Manufacturing Descriptor from TI Based Edgeport
- */
- ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
- if (!ti_manuf_desc)
- return -ENOMEM;
+ dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__);
- status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
- if (status) {
- kfree(ti_manuf_desc);
- return status;
- }
+ status = check_i2c_image(serial);
+ if (status) {
+ dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__);
+ return status;
+ }
- /* Check version number of ION descriptor */
- if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
- dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
- __func__, ti_cpu_rev(ti_manuf_desc));
- kfree(ti_manuf_desc);
- return -EINVAL;
- }
+ /* Validate Hardware version number
+ * Read Manufacturing Descriptor from TI Based Edgeport
+ */
+ ti_manuf_desc = kmalloc(sizeof(*ti_manuf_desc), GFP_KERNEL);
+ if (!ti_manuf_desc)
+ return -ENOMEM;
- rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
- if (!rom_desc) {
+ status = get_manuf_info(serial, (__u8 *)ti_manuf_desc);
+ if (status) {
+ kfree(ti_manuf_desc);
+ return status;
+ }
+
+ /* Check version number of ION descriptor */
+ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) {
+ dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n",
+ __func__, ti_cpu_rev(ti_manuf_desc));
+ kfree(ti_manuf_desc);
+ return -EINVAL;
+ }
+
+ rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL);
+ if (!rom_desc) {
+ kfree(ti_manuf_desc);
+ return -ENOMEM;
+ }
+
+ /* Search for type 2 record (firmware record) */
+ start_address = get_descriptor_addr(serial,
+ I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
+ if (start_address != 0) {
+ struct ti_i2c_firmware_rec *firmware_version;
+ u8 *record;
+
+ dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n",
+ __func__);
+
+ firmware_version = kmalloc(sizeof(*firmware_version),
+ GFP_KERNEL);
+ if (!firmware_version) {
+ kfree(rom_desc);
kfree(ti_manuf_desc);
return -ENOMEM;
}
- /* Search for type 2 record (firmware record) */
- start_address = get_descriptor_addr(serial,
- I2C_DESC_TYPE_FIRMWARE_BASIC, rom_desc);
- if (start_address != 0) {
- struct ti_i2c_firmware_rec *firmware_version;
- u8 *record;
+ /* Validate version number
+ * Read the descriptor data
+ */
+ status = read_rom(serial, start_address +
+ sizeof(struct ti_i2c_desc),
+ sizeof(struct ti_i2c_firmware_rec),
+ (__u8 *)firmware_version);
+ if (status) {
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
+ return status;
+ }
- dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__);
+ /* Check version number of download with current
+ * version in I2c */
+ download_cur_ver = (firmware_version->Ver_Major << 8) +
+ (firmware_version->Ver_Minor);
+ download_new_ver = (fw_hdr->major_version << 8) +
+ (fw_hdr->minor_version);
+
+ dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n",
+ __func__, firmware_version->Ver_Major,
+ firmware_version->Ver_Minor,
+ fw_hdr->major_version, fw_hdr->minor_version);
+
+ /* Check if we have an old version in the I2C and
+ * update if necessary */
+ if (download_cur_ver < download_new_ver) {
+ dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n",
+ __func__,
+ firmware_version->Ver_Major,
+ firmware_version->Ver_Minor,
+ fw_hdr->major_version,
+ fw_hdr->minor_version);
- firmware_version = kmalloc(sizeof(*firmware_version),
- GFP_KERNEL);
- if (!firmware_version) {
+ record = kmalloc(1, GFP_KERNEL);
+ if (!record) {
+ kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
return -ENOMEM;
}
-
- /* Validate version number
- * Read the descriptor data
+ /*
+ * In order to update the I2C firmware we must
+ * change the type 2 record to type 0xF2. This
+ * will force the UMP to come up in Boot Mode.
+ * Then while in boot mode, the driver will
+ * download the latest firmware (padded to
+ * 15.5k) into the UMP ram. Finally when the
+ * device comes back up in download mode the
+ * driver will cause the new firmware to be
+ * copied from the UMP Ram to I2C and the
+ * firmware will update the record type from
+ * 0xf2 to 0x02.
*/
- status = read_rom(serial, start_address +
- sizeof(struct ti_i2c_desc),
- sizeof(struct ti_i2c_firmware_rec),
- (__u8 *)firmware_version);
+ *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
+
+ /* Change the I2C Firmware record type to
+ * 0xf2 to trigger an update */
+ status = write_rom(serial, start_address,
+ sizeof(*record), record);
if (status) {
+ kfree(record);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
return status;
}
- /* Check version number of download with current
- version in I2c */
- download_cur_ver = (firmware_version->Ver_Major << 8) +
- (firmware_version->Ver_Minor);
- download_new_ver = (fw_hdr->major_version << 8) +
- (fw_hdr->minor_version);
-
- dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n",
- __func__, firmware_version->Ver_Major,
- firmware_version->Ver_Minor,
- fw_hdr->major_version, fw_hdr->minor_version);
+ /* verify the write -- must do this in order
+ * for write to complete before we do the
+ * hardware reset
+ */
+ status = read_rom(serial,
+ start_address,
+ sizeof(*record),
+ record);
+ if (status) {
+ kfree(record);
+ kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
+ return status;
+ }
- /* Check if we have an old version in the I2C and
- update if necessary */
- if (download_cur_ver < download_new_ver) {
- dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n",
- __func__,
- firmware_version->Ver_Major,
- firmware_version->Ver_Minor,
- fw_hdr->major_version,
- fw_hdr->minor_version);
-
- record = kmalloc(1, GFP_KERNEL);
- if (!record) {
- kfree(firmware_version);
- kfree(rom_desc);
- kfree(ti_manuf_desc);
- return -ENOMEM;
- }
- /* In order to update the I2C firmware we must
- * change the type 2 record to type 0xF2. This
- * will force the UMP to come up in Boot Mode.
- * Then while in boot mode, the driver will
- * download the latest firmware (padded to
- * 15.5k) into the UMP ram. Finally when the
- * device comes back up in download mode the
- * driver will cause the new firmware to be
- * copied from the UMP Ram to I2C and the
- * firmware will update the record type from
- * 0xf2 to 0x02.
- */
- *record = I2C_DESC_TYPE_FIRMWARE_BLANK;
-
- /* Change the I2C Firmware record type to
- 0xf2 to trigger an update */
- status = write_rom(serial, start_address,
- sizeof(*record), record);
- if (status) {
- kfree(record);
- kfree(firmware_version);
- kfree(rom_desc);
- kfree(ti_manuf_desc);
- return status;
- }
-
- /* verify the write -- must do this in order
- * for write to complete before we do the
- * hardware reset
- */
- status = read_rom(serial,
- start_address,
- sizeof(*record),
- record);
- if (status) {
- kfree(record);
- kfree(firmware_version);
- kfree(rom_desc);
- kfree(ti_manuf_desc);
- return status;
- }
-
- if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
- dev_err(dev, "%s - error resetting device\n", __func__);
- kfree(record);
- kfree(firmware_version);
- kfree(rom_desc);
- kfree(ti_manuf_desc);
- return -ENODEV;
- }
-
- dev_dbg(dev, "%s - HARDWARE RESET\n", __func__);
-
- /* Reset UMP -- Back to BOOT MODE */
- status = ti_vsend_sync(serial->serial->dev,
- UMPC_HARDWARE_RESET,
- 0, 0, NULL, 0,
- TI_VSEND_TIMEOUT_DEFAULT);
-
- dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status);
-
- /* return an error on purpose. */
+ if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) {
+ dev_err(dev, "%s - error resetting device\n",
+ __func__);
kfree(record);
kfree(firmware_version);
kfree(rom_desc);
kfree(ti_manuf_desc);
return -ENODEV;
- } else {
- /* Same or newer fw version is already loaded */
- serial->fw_version = download_cur_ver;
}
+
+ dev_dbg(dev, "%s - HARDWARE RESET\n", __func__);
+
+ /* Reset UMP -- Back to BOOT MODE */
+ status = ti_vsend_sync(serial->serial->dev,
+ UMPC_HARDWARE_RESET,
+ 0, 0, NULL, 0,
+ TI_VSEND_TIMEOUT_DEFAULT);
+
+ dev_dbg(dev, "%s - HARDWARE RESET return %d\n",
+ __func__, status);
+
+ /* return an error on purpose. */
+ kfree(record);
kfree(firmware_version);
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
+ return -ENODEV;
}
- /* Search for type 0xF2 record (firmware blank record) */
- else if ((start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc)) != 0) {
+ /* Same or newer fw version is already loaded */
+ serial->fw_version = download_cur_ver;
+ kfree(firmware_version);
+ }
+ /* Search for type 0xF2 record (firmware blank record) */
+ else {
+ start_address = get_descriptor_addr(serial,
+ I2C_DESC_TYPE_FIRMWARE_BLANK, rom_desc);
+ if (start_address != 0) {
#define HEADER_SIZE (sizeof(struct ti_i2c_desc) + \
- sizeof(struct ti_i2c_firmware_rec))
+ sizeof(struct ti_i2c_firmware_rec))
__u8 *header;
__u8 *vheader;
return -ENOMEM;
}
- dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__);
+ dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n",
+ __func__);
/*
* In order to update the I2C firmware we must change
}
/* Update I2C with type 0xf2 record with correct
- size and checksum */
+ * size and checksum */
status = write_rom(serial,
start_address,
HEADER_SIZE,
}
/* verify the write -- must do this in order for
- write to complete before we do the hardware reset */
+ * write to complete before we do the hardware reset */
status = read_rom(serial, start_address,
HEADER_SIZE, vheader);
if (status) {
- dev_dbg(dev, "%s - can't read header back\n", __func__);
+ dev_dbg(dev, "%s - can't read header back\n",
+ __func__);
kfree(vheader);
kfree(header);
kfree(rom_desc);
return status;
}
if (memcmp(vheader, header, HEADER_SIZE)) {
- dev_dbg(dev, "%s - write download record failed\n", __func__);
+ dev_dbg(dev, "%s - write download record failed\n",
+ __func__);
kfree(vheader);
kfree(header);
kfree(rom_desc);
0, 0, NULL, 0,
TI_VSEND_TIMEOUT_FW_DOWNLOAD);
- dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status);
+ dev_dbg(dev, "%s - Update complete 0x%x\n", __func__,
+ status);
if (status) {
dev_err(dev,
"%s - UMPC_COPY_DNLD_TO_I2C failed\n",
- __func__);
+ __func__);
kfree(rom_desc);
kfree(ti_manuf_desc);
return status;
}
}
-
- // The device is running the download code
- kfree(rom_desc);
- kfree(ti_manuf_desc);
- return 0;
}
- /********************************************************************/
- /* Boot Mode */
- /********************************************************************/
+ /* The device is running the download code */
+ kfree(rom_desc);
+ kfree(ti_manuf_desc);
+ return 0;
+}
+
+static int do_boot_mode(struct edgeport_serial *serial,
+ const struct firmware *fw)
+{
+ struct device *dev = &serial->serial->interface->dev;
+ int status = 0;
+ struct edge_ti_manuf_descriptor *ti_manuf_desc;
+ struct edgeport_fw_hdr *fw_hdr = (struct edgeport_fw_hdr *)fw->data;
+
dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__);
/* Configure the TI device so we can use the BULK pipes for download */
projects / linux.git / commitdiff