arm64: dts: imx8mm: Add Crypto CAAM support

The i.MX8M Mini supports the same crypto engine as what is in
the i.MX8MQ, but it is not currently present in the device tree.

This patch places it into the device tree.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index a0dbf47ab320ab2ed80882e0334527cc2c7f1418..82a2abf89b5e9de635870c5b7925d1c6a27d3804 100644 (file)
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -641,6 +641,36 @@ uart2: serial@30890000 {
                                status = "disabled";
                        };
 
+                       crypto: crypto@30900000 {
+                               compatible = "fsl,sec-v4.0";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               reg = <0x30900000 0x40000>;
+                               ranges = <0 0x30900000 0x40000>;
+                               interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&clk IMX8MM_CLK_AHB>,
+                                        <&clk IMX8MM_CLK_IPG_ROOT>;
+                               clock-names = "aclk", "ipg";
+
+                               sec_jr0: jr@1000 {
+                                       compatible = "fsl,sec-v4.0-job-ring";
+                                       reg = <0x1000 0x1000>;
+                                       interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+                               };
+
+                               sec_jr1: jr@2000 {
+                                       compatible = "fsl,sec-v4.0-job-ring";
+                                       reg = <0x2000 0x1000>;
+                                       interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+                               };
+
+                               sec_jr2: jr@3000 {
+                                       compatible = "fsl,sec-v4.0-job-ring";
+                                       reg = <0x3000 0x1000>;
+                                       interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+                               };
+                       };
+
                        i2c1: i2c@30a20000 {
                                compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
                                #address-cells = <1>;