usb: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
    $ sed -e 's/^        /\t/' -i */Kconfig

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20190923154956.6868-1-krzk@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 89abc6078703f218b48d4239ac60c0c11a1d71a3..cc431376fcd0729bd5455a85ea7aa77a0abd09c6 100644 (file)
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -103,7 +103,7 @@ config USB_DWC3_MESON_G12A
        default USB_DWC3
        select USB_ROLE_SWITCH
        help
-         Support USB2/3 functionality in Amlogic G12A platforms.
+        Support USB2/3 functionality in Amlogic G12A platforms.
         Say 'Y' or 'M' if you have one such device.
 
 config USB_DWC3_OF_SIMPLE
@@ -111,7 +111,7 @@ config USB_DWC3_OF_SIMPLE
        depends on OF && COMMON_CLK
        default USB_DWC3
        help
-         Support USB2/3 functionality in simple SoC integrations.
+        Support USB2/3 functionality in simple SoC integrations.
         Currently supports Xilinx and Qualcomm DWC USB3 IP.
         Say 'Y' or 'M' if you have one such device.
 

diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig
index 69ff7f8c86f5090d64e5ba6485fe922bde12080a..38eaa9417b385b721e68e17ed470a6282cf132ae 100644 (file)
--- a/drivers/usb/gadget/legacy/Kconfig
+++ b/drivers/usb/gadget/legacy/Kconfig
@@ -154,16 +154,16 @@ config USB_ETH_EEM
        select USB_LIBCOMPOSITE
        select USB_F_EEM
        help
-         CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
-         and therefore can be supported by more hardware.  Technically ECM and
-         EEM are designed for different applications.  The ECM model extends
-         the network interface to the target (e.g. a USB cable modem), and the
-         EEM model is for mobile devices to communicate with hosts using
-         ethernet over USB.  For Linux gadgets, however, the interface with
-         the host is the same (a usbX device), so the differences are minimal.
-
-         If you say "y" here, the Ethernet gadget driver will use the EEM
-         protocol rather than ECM.  If unsure, say "n".
+        CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
+        and therefore can be supported by more hardware.  Technically ECM and
+        EEM are designed for different applications.  The ECM model extends
+        the network interface to the target (e.g. a USB cable modem), and the
+        EEM model is for mobile devices to communicate with hosts using
+        ethernet over USB.  For Linux gadgets, however, the interface with
+        the host is the same (a usbX device), so the differences are minimal.
+
+        If you say "y" here, the Ethernet gadget driver will use the EEM
+        protocol rather than ECM.  If unsure, say "n".
 
 config USB_G_NCM
        tristate "Network Control Model (NCM) support"

diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig
index d7e611645533701c81acda6edf39cb664cc6ea13..485c92ef888a953855cd4831c08b279e28f4f243 100644 (file)
--- a/drivers/usb/gadget/udc/Kconfig
+++ b/drivers/usb/gadget/udc/Kconfig
@@ -123,7 +123,7 @@ config USB_GR_UDC
        tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver"
        depends on HAS_DMA
        help
-          Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
+         Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB
          VHDL IP core library.
 
 config USB_OMAP

diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 79b2e79dddd0674b83d0406c41edb183dc85557e..d6164ede63d369e726f5b40654d31138b0762a57 100644 (file)
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -220,12 +220,12 @@ config USB_EHCI_HCD_ORION
          Marvell PXA/MMP USB controller" for those.
 
 config USB_EHCI_HCD_SPEAR
-        tristate "Support for ST SPEAr on-chip EHCI USB controller"
-        depends on USB_EHCI_HCD && PLAT_SPEAR
-        default y
-        ---help---
-          Enables support for the on-chip EHCI controller on
-          ST SPEAr chips.
+       tristate "Support for ST SPEAr on-chip EHCI USB controller"
+       depends on USB_EHCI_HCD && PLAT_SPEAR
+       default y
+       ---help---
+         Enables support for the on-chip EHCI controller on
+         ST SPEAr chips.
 
 config USB_EHCI_HCD_STI
        tristate "Support for ST STiHxxx on-chip EHCI USB controller"
@@ -237,12 +237,12 @@ config USB_EHCI_HCD_STI
          STMicroelectronics consumer electronics SoC's.
 
 config USB_EHCI_HCD_AT91
-        tristate  "Support for Atmel on-chip EHCI USB controller"
-        depends on USB_EHCI_HCD && ARCH_AT91
-        default y
-        ---help---
-          Enables support for the on-chip EHCI controller on
-          Atmel chips.
+       tristate  "Support for Atmel on-chip EHCI USB controller"
+       depends on USB_EHCI_HCD && ARCH_AT91
+       default y
+       ---help---
+         Enables support for the on-chip EHCI controller on
+         Atmel chips.
 
 config USB_EHCI_TEGRA
        tristate "NVIDIA Tegra HCD support"
@@ -250,8 +250,8 @@ config USB_EHCI_TEGRA
        select USB_EHCI_ROOT_HUB_TT
        select USB_TEGRA_PHY
        help
-         This driver enables support for the internal USB Host Controllers
-         found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
+        This driver enables support for the internal USB Host Controllers
+        found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
 
 config USB_EHCI_HCD_PPC_OF
        bool "EHCI support for PPC USB controller on OF platform bus"
@@ -409,12 +409,12 @@ config USB_OHCI_HCD_OMAP1
          Enables support for the OHCI controller on OMAP1/2 chips.
 
 config USB_OHCI_HCD_SPEAR
-        tristate "Support for ST SPEAr on-chip OHCI USB controller"
-        depends on USB_OHCI_HCD && PLAT_SPEAR
-        default y
-        ---help---
-          Enables support for the on-chip OHCI controller on
-          ST SPEAr chips.
+       tristate "Support for ST SPEAr on-chip OHCI USB controller"
+       depends on USB_OHCI_HCD && PLAT_SPEAR
+       default y
+       ---help---
+         Enables support for the on-chip OHCI controller on
+         ST SPEAr chips.
 
 config USB_OHCI_HCD_STI
        tristate "Support for ST STiHxxx on-chip OHCI USB controller"
@@ -426,12 +426,12 @@ config USB_OHCI_HCD_STI
          STMicroelectronics consumer electronics SoC's.
 
 config USB_OHCI_HCD_S3C2410
-        tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
-        depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
-        default y
-        ---help---
-          Enables support for the on-chip OHCI controller on
-          S3C24xx/S3C64xx chips.
+       tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
+       depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
+       default y
+       ---help---
+         Enables support for the on-chip OHCI controller on
+         S3C24xx/S3C64xx chips.
 
 config USB_OHCI_HCD_LPC32XX
        tristate "Support for LPC on-chip OHCI USB controller"
@@ -440,8 +440,8 @@ config USB_OHCI_HCD_LPC32XX
        depends on USB_ISP1301
        default y
        ---help---
-          Enables support for the on-chip OHCI controller on
-          NXP chips.
+         Enables support for the on-chip OHCI controller on
+         NXP chips.
 
 config USB_OHCI_HCD_PXA27X
        tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
@@ -456,8 +456,8 @@ config USB_OHCI_HCD_AT91
        depends on USB_OHCI_HCD && ARCH_AT91 && OF
        default y
        ---help---
-          Enables support for the on-chip OHCI controller on
-          Atmel chips.
+         Enables support for the on-chip OHCI controller on
+         Atmel chips.
 
 config USB_OHCI_HCD_OMAP3
        tristate "OHCI support for OMAP3 and later chips"
@@ -716,11 +716,11 @@ config USB_IMX21_HCD
        tristate "i.MX21 HCD support"
        depends on ARM && ARCH_MXC
        help
-         This driver enables support for the on-chip USB host in the
-         i.MX21 processor.
+        This driver enables support for the on-chip USB host in the
+        i.MX21 processor.
 
-         To compile this driver as a module, choose M here: the
-         module will be called "imx21-hcd".
+        To compile this driver as a module, choose M here: the
+        module will be called "imx21-hcd".
 
 config USB_HCD_BCMA
        tristate "BCMA usb host driver"

diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index bdae62b2ffe0c7c955c2a66f360b41ff6625ba5f..664d27bb6086a4f79f38ea4f0f904bfb9186c669 100644 (file)
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -191,8 +191,8 @@ config USB_TEST
          including sample test device firmware and "how to use it".
 
 config USB_EHSET_TEST_FIXTURE
-        tristate "USB EHSET Test Fixture driver"
-        help
+       tristate "USB EHSET Test Fixture driver"
+       help
          Say Y here if you want to support the special test fixture device
          used for the USB-IF Embedded Host High-Speed Electrical Test procedure.
 
@@ -247,13 +247,13 @@ config USB_HSIC_USB3503
        depends on I2C
        select REGMAP_I2C
        help
-         This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
+        This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver.
 
 config USB_HSIC_USB4604
        tristate "USB4604 HSIC to USB20 Driver"
        depends on I2C
        help
-         This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
+        This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver.
 
 config USB_LINK_LAYER_TEST
        tristate "USB Link Layer Test driver"

diff --git a/drivers/usb/misc/sisusbvga/Kconfig b/drivers/usb/misc/sisusbvga/Kconfig
index 9b632ab24f03305c81daad362c852f8b5215da07..c16121276a213a9de1a030dea57d28424ad0adbe 100644 (file)
--- a/drivers/usb/misc/sisusbvga/Kconfig
+++ b/drivers/usb/misc/sisusbvga/Kconfig
@@ -4,7 +4,7 @@ config USB_SISUSBVGA
        tristate "USB 2.0 SVGA dongle support (Net2280/SiS315)"
        depends on (USB_MUSB_HDRC || USB_EHCI_HCD)
        select FONT_SUPPORT if USB_SISUSBVGA_CON
-        ---help---
+       ---help---
          Say Y here if you intend to attach a USB2VGA dongle based on a
          Net2280 and a SiS315 chip.
 

diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig
index 67279c6bce33845952a4e1547affcc55491a993a..0a8c16a8cda2af73aab2e76c5a9d6f1929af74bb 100644 (file)
--- a/drivers/usb/serial/Kconfig
+++ b/drivers/usb/serial/Kconfig
@@ -271,17 +271,17 @@ config USB_SERIAL_F8153X
 config USB_SERIAL_GARMIN
        tristate "USB Garmin GPS driver"
        help
-         Say Y here if you want to connect to your Garmin GPS.
-         Should work with most Garmin GPS devices which have a native USB port.
+        Say Y here if you want to connect to your Garmin GPS.
+        Should work with most Garmin GPS devices which have a native USB port.
 
-         See <http://sourceforge.net/projects/garmin-gps> for the latest
-         version of the driver.
+        See <http://sourceforge.net/projects/garmin-gps> for the latest
+        version of the driver.
 
-         To compile this driver as a module, choose M here: the
-         module will be called garmin_gps.
+        To compile this driver as a module, choose M here: the
+        module will be called garmin_gps.
 
 config USB_SERIAL_IPW
-        tristate "USB IPWireless (3G UMTS TDD) Driver"
+       tristate "USB IPWireless (3G UMTS TDD) Driver"
        select USB_SERIAL_WWAN
        help
          Say Y here if you want to use a IPWireless USB modem such as
@@ -341,20 +341,20 @@ config USB_SERIAL_KLSI
          module will be called kl5kusb105.
 
 config USB_SERIAL_KOBIL_SCT
-        tristate "USB KOBIL chipcard reader"
-        ---help---
-          Say Y here if you want to use one of the following KOBIL USB chipcard
-          readers:
-
-            - USB TWIN
-            - KAAN Standard Plus
-            - KAAN SIM
-            - SecOVID Reader Plus
-            - B1 Professional
-            - KAAN Professional
-
-          Note that you need a current CT-API.
-          To compile this driver as a module, choose M here: the
+       tristate "USB KOBIL chipcard reader"
+       ---help---
+         Say Y here if you want to use one of the following KOBIL USB chipcard
+         readers:
+
+           - USB TWIN
+           - KAAN Standard Plus
+           - KAAN SIM
+           - SecOVID Reader Plus
+           - B1 Professional
+           - KAAN Professional
+
+         Note that you need a current CT-API.
+         To compile this driver as a module, choose M here: the
          module will be called kobil_sct.
 
 config USB_SERIAL_MCT_U232
@@ -458,7 +458,7 @@ config USB_SERIAL_OTI6858
        tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
        help
          Say Y here if you want to use the OTi-6858 single port USB to serial
-          converter device.
+         converter device.
 
          To compile this driver as a module, choose M here: the
          module will be called oti6858.