usb: chipidea: disable all interrupts and clear all interrupts status

During the initialization, it needs to disable all interrupts
enable bit as well as clear all interrupts status bits to avoid
exceptional interrupt.

Tested-by: Marek Vasut <marex@denx.de>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c
index ab01e18bc2f83b6da027be016ec6df1495fc0fe5..e9cfd3193d65ae664173bfbb6fa575151e11c9d3 100644 (file)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -199,6 +199,12 @@ static int hw_device_init(struct ci_hdrc *ci, void __iomem *base)
        if (ci->hw_ep_max > ENDPT_MAX)
                return -ENODEV;
 
+       /* Disable all interrupts bits */
+       hw_write(ci, OP_USBINTR, 0xffffffff, 0);
+
+       /* Clear all interrupts status bits*/
+       hw_write(ci, OP_USBSTS, 0xffffffff, 0xffffffff);
+
        dev_dbg(ci->dev, "ChipIdea HDRC found, lpm: %d; cap: %p op: %p\n",
                ci->hw_bank.lpm, ci->hw_bank.cap, ci->hw_bank.op);
 
@@ -434,8 +440,11 @@ static void ci_get_otg_capable(struct ci_hdrc *ci)
                ci->is_otg = (hw_read(ci, CAP_DCCPARAMS,
                                DCCPARAMS_DC | DCCPARAMS_HC)
                                        == (DCCPARAMS_DC | DCCPARAMS_HC));
-       if (ci->is_otg)
+       if (ci->is_otg) {
                dev_dbg(ci->dev, "It is OTG capable controller\n");
+               ci_disable_otg_interrupt(ci, OTGSC_INT_EN_BITS);
+               ci_clear_otg_interrupt(ci, OTGSC_INT_STATUS_BITS);
+       }
 }
 
 static int ci_hdrc_probe(struct platform_device *pdev)