ARM: at91/DT: remove atmel,use-dma-* from 9x5 and 9n12 USART nodes

Fix the use of USART on both at91sam9x5 and at91sam9n12. In DTS, the
atmel,use-dma-[rx|tx] property is present but a DMA channel cannot be used.
Indeed the connexion between the DMA engine and the slave is not implemented
yet in Device Tree.
Note however that this property is also used for PDC (private DMA) on older
SoCs. This is why the driver alone cannot determine the validity of this
property.

Reported-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: stable <stable@vger.kernel.org> [3.8+]

diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 80e29c605d4e53de1a8f948b5acb0eb975aee641..4801717566dd880e35583f75da3716f91f1b1d80 100644 (file)
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -324,8 +324,6 @@ usart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x4000>;
                                interrupts = <5 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart0>;
                                status = "disabled";
@@ -335,8 +333,6 @@ usart1: serial@f8020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8020000 0x4000>;
                                interrupts = <6 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart1>;
                                status = "disabled";
@@ -346,8 +342,6 @@ usart2: serial@f8024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8024000 0x4000>;
                                interrupts = <7 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart2>;
                                status = "disabled";
@@ -357,8 +351,6 @@ usart3: serial@f8028000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8028000 0x4000>;
                                interrupts = <8 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart3>;
                                status = "disabled";

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 0c6009080b88821c642df03a7a21068351352549..d112c3af8ce214280113a3633f85daf589e34b4a 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -402,8 +402,6 @@ usart0: serial@f801c000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf801c000 0x200>;
                                interrupts = <5 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart0>;
                                status = "disabled";
@@ -413,8 +411,6 @@ usart1: serial@f8020000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8020000 0x200>;
                                interrupts = <6 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart1>;
                                status = "disabled";
@@ -424,8 +420,6 @@ usart2: serial@f8024000 {
                                compatible = "atmel,at91sam9260-usart";
                                reg = <0xf8024000 0x200>;
                                interrupts = <7 4 5>;
-                               atmel,use-dma-rx;
-                               atmel,use-dma-tx;
                                pinctrl-names = "default";
                                pinctrl-0 = <&pinctrl_usart2>;
                                status = "disabled";