#endif
struct qib_msix_entry {
- int irq;
void *arg;
#ifdef CONFIG_INFINIBAND_QIB_DCA
int dca;
int rcv;
struct qib_irq_notify *notifier;
#endif
- char name[MAX_NAME_SIZE];
cpumask_var_t mask;
};
const struct pci_device_id *);
void qib_pcie_ddcleanup(struct qib_devdata *);
int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent);
-int qib_reinit_intr(struct qib_devdata *);
-void qib_enable_intx(struct qib_devdata *dd);
-void qib_nomsi(struct qib_devdata *);
-void qib_nomsix(struct qib_devdata *);
+void qib_free_irq(struct qib_devdata *dd);
+int qib_reinit_intr(struct qib_devdata *dd);
void qib_pcie_getcmd(struct qib_devdata *, u16 *, u8 *, u8 *);
void qib_pcie_reenable(struct qib_devdata *, u16, u8, u8);
/* interrupts for device */
u32 lastbuf_for_pio;
u32 updthresh; /* current AvailUpdThld */
u32 updthresh_dflt; /* default AvailUpdThld */
- int irq;
u8 presets_needed;
u8 relock_timer_active;
char emsgbuf[128];
u64 iblnkerrsnap;
u64 ibcctrl; /* shadow for kr_ibcctrl */
u32 lastlinkrecov; /* link recovery issue */
- int irq;
u32 cntrnamelen;
u32 portcntrnamelen;
u32 ncntrs;
spin_unlock_irqrestore(&dd->cspec->gpio_lock, flags);
}
-static void qib_6120_free_irq(struct qib_devdata *dd)
-{
- if (dd->cspec->irq) {
- free_irq(dd->cspec->irq, dd);
- dd->cspec->irq = 0;
- }
- qib_nomsi(dd);
-}
-
/**
* qib_6120_setup_cleanup - clean up any per-chip chip-specific stuff
* @dd: the qlogic_ib device
*/
static void qib_6120_setup_cleanup(struct qib_devdata *dd)
{
- qib_6120_free_irq(dd);
+ qib_free_irq(dd);
kfree(dd->cspec->cntrs);
kfree(dd->cspec->portcntrs);
if (dd->cspec->dummy_hdrq) {
*/
static void qib_setup_6120_interrupt(struct qib_devdata *dd)
{
+ int ret;
+
/*
* If the chip supports added error indication via GPIO pins,
* enable interrupts on those bits so the interrupt routine
qib_write_kreg(dd, kr_gpio_mask, dd->cspec->gpio_mask);
}
- if (!dd->cspec->irq)
+ ret = pci_request_irq(dd->pcidev, 0, qib_6120intr, NULL, dd,
+ QIB_DRV_NAME);
+ if (ret)
qib_dev_err(dd,
- "irq is 0, BIOS error? Interrupts won't work\n");
- else {
- int ret;
-
- ret = request_irq(dd->cspec->irq, qib_6120intr, 0,
- QIB_DRV_NAME, dd);
- if (ret)
- qib_dev_err(dd,
- "Couldn't setup interrupt (irq=%d): %d\n",
- dd->cspec->irq, ret);
- }
+ "Couldn't setup interrupt (irq=%d): %d\n",
+ pci_irq_vector(dd->pcidev, 0), ret);
}
/**
dd->f_bringup_serdes = qib_6120_bringup_serdes;
dd->f_cleanup = qib_6120_setup_cleanup;
dd->f_clear_tids = qib_6120_clear_tids;
- dd->f_free_irq = qib_6120_free_irq;
+ dd->f_free_irq = qib_free_irq;
dd->f_get_base_info = qib_6120_get_base_info;
dd->f_get_msgheader = qib_6120_get_msgheader;
dd->f_getsendbuf = qib_6120_getsendbuf;
if (qib_pcie_params(dd, 8, NULL))
qib_dev_err(dd,
"Failed to setup PCIe or interrupts; continuing anyway\n");
- dd->cspec->irq = pdev->irq; /* save IRQ */
-
/* clear diagctrl register, in case diags were running and crashed */
qib_write_kreg(dd, kr_hwdiagctrl, 0);
qib_write_kreg(dd, kr_rcvpktledcnt, ledblink);
}
-static void qib_7220_free_irq(struct qib_devdata *dd)
-{
- if (dd->cspec->irq) {
- free_irq(dd->cspec->irq, dd);
- dd->cspec->irq = 0;
- }
- qib_nomsi(dd);
-}
-
/*
* qib_setup_7220_cleanup - clean up any per-chip chip-specific stuff
* @dd: the qlogic_ib device
*/
static void qib_setup_7220_cleanup(struct qib_devdata *dd)
{
- qib_7220_free_irq(dd);
+ qib_free_irq(dd);
kfree(dd->cspec->cntrs);
kfree(dd->cspec->portcntrs);
}
*/
static void qib_setup_7220_interrupt(struct qib_devdata *dd)
{
- if (!dd->cspec->irq)
- qib_dev_err(dd,
- "irq is 0, BIOS error? Interrupts won't work\n");
- else {
- int ret = request_irq(dd->cspec->irq, qib_7220intr,
- dd->msi_lo ? 0 : IRQF_SHARED,
- QIB_DRV_NAME, dd);
+ int ret;
- if (ret)
- qib_dev_err(dd,
- "Couldn't setup %s interrupt (irq=%d): %d\n",
- dd->msi_lo ? "MSI" : "INTx",
- dd->cspec->irq, ret);
- }
+ ret = pci_request_irq(dd->pcidev, 0, qib_7220intr, NULL, dd,
+ QIB_DRV_NAME);
+ if (ret)
+ qib_dev_err(dd, "Couldn't setup %s interrupt (irq=%d): %d\n",
+ dd->pcidev->msi_enabled ? "MSI" : "INTx",
+ pci_irq_vector(dd->pcidev, 0), ret);
}
/**
return 0;
qib_devinfo(dd->pcidev,
- "MSI interrupt not detected, trying INTx interrupts\n");
- qib_7220_free_irq(dd);
- qib_enable_intx(dd);
- /*
- * Some newer kernels require free_irq before disable_msi,
- * and irq can be changed during disable and INTx enable
- * and we need to therefore use the pcidev->irq value,
- * not our saved MSI value.
- */
- dd->cspec->irq = dd->pcidev->irq;
+ "MSI interrupt not detected, trying INTx interrupts\n");
+
+ qib_free_irq(dd);
+ dd->msi_lo = 0;
+ if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_LEGACY) < 0)
+ qib_dev_err(dd, "Failed to enable INTx\n");
qib_setup_7220_interrupt(dd);
return 1;
}
dd->f_bringup_serdes = qib_7220_bringup_serdes;
dd->f_cleanup = qib_setup_7220_cleanup;
dd->f_clear_tids = qib_7220_clear_tids;
- dd->f_free_irq = qib_7220_free_irq;
+ dd->f_free_irq = qib_free_irq;
dd->f_get_base_info = qib_7220_get_base_info;
dd->f_get_msgheader = qib_7220_get_msgheader;
dd->f_getsendbuf = qib_7220_getsendbuf;
qib_dev_err(dd,
"Failed to setup PCIe or interrupts; continuing anyway\n");
- /* save IRQ for possible later use */
- dd->cspec->irq = pdev->irq;
-
if (qib_read_kreg64(dd, kr_hwerrstatus) &
QLOGIC_IB_HWE_SERDESPLLFAILED)
qib_write_kreg(dd, kr_hwerrclear,
u32 updthresh; /* current AvailUpdThld */
u32 updthresh_dflt; /* default AvailUpdThld */
u32 r1;
- int irq;
u32 num_msix_entries;
u32 sdmabufcnt;
u32 lastbuf_for_pio;
static u32 __iomem *qib_7322_getsendbuf(struct qib_pportdata *, u64, u32 *);
#ifdef CONFIG_INFINIBAND_QIB_DCA
static void qib_setup_dca(struct qib_devdata *dd);
-static void setup_dca_notifier(struct qib_devdata *dd,
- struct qib_msix_entry *m);
-static void reset_dca_notifier(struct qib_devdata *dd,
- struct qib_msix_entry *m);
+static void setup_dca_notifier(struct qib_devdata *dd, int msixnum);
+static void reset_dca_notifier(struct qib_devdata *dd, int msixnum);
#endif
/**
qib_write_kreg(dd, KREG_IDX(DCACtrlB) + i,
cspec->dca_rcvhdr_ctrl[i]);
for (i = 0; i < cspec->num_msix_entries; i++)
- setup_dca_notifier(dd, &cspec->msix_entries[i]);
+ setup_dca_notifier(dd, i);
}
static void qib_irq_notifier_notify(struct irq_affinity_notify *notify,
}
#endif
-/*
- * Disable MSIx interrupt if enabled, call generic MSIx code
- * to cleanup, and clear pending MSIx interrupts.
- * Used for fallback to INTx, after reset, and when MSIx setup fails.
- */
-static void qib_7322_nomsix(struct qib_devdata *dd)
+static void qib_7322_free_irq(struct qib_devdata *dd)
{
u64 intgranted;
- int n;
+ int i;
dd->cspec->main_int_mask = ~0ULL;
- n = dd->cspec->num_msix_entries;
- if (n) {
- int i;
- dd->cspec->num_msix_entries = 0;
- for (i = 0; i < n; i++) {
+ for (i = 0; i < dd->cspec->num_msix_entries; i++) {
+ /* only free IRQs that were allocated */
+ if (dd->cspec->msix_entries[i].arg) {
#ifdef CONFIG_INFINIBAND_QIB_DCA
- reset_dca_notifier(dd, &dd->cspec->msix_entries[i]);
+ reset_dca_notifier(dd, i);
#endif
- irq_set_affinity_hint(
- dd->cspec->msix_entries[i].irq, NULL);
+ irq_set_affinity_hint(pci_irq_vector(dd->pcidev, i),
+ NULL);
free_cpumask_var(dd->cspec->msix_entries[i].mask);
- free_irq(dd->cspec->msix_entries[i].irq,
- dd->cspec->msix_entries[i].arg);
+ pci_free_irq(dd->pcidev, i,
+ dd->cspec->msix_entries[i].arg);
}
- qib_nomsix(dd);
}
+
+ /* If num_msix_entries was 0, disable the INTx IRQ */
+ if (!dd->cspec->num_msix_entries)
+ pci_free_irq(dd->pcidev, 0, dd);
+ else
+ dd->cspec->num_msix_entries = 0;
+
+ pci_free_irq_vectors(dd->pcidev);
+
/* make sure no MSIx interrupts are left pending */
intgranted = qib_read_kreg64(dd, kr_intgranted);
if (intgranted)
qib_write_kreg(dd, kr_intgranted, intgranted);
}
-static void qib_7322_free_irq(struct qib_devdata *dd)
-{
- if (dd->cspec->irq) {
- free_irq(dd->cspec->irq, dd);
- dd->cspec->irq = 0;
- }
- qib_7322_nomsix(dd);
-}
-
static void qib_setup_7322_cleanup(struct qib_devdata *dd)
{
int i;
#ifdef CONFIG_INFINIBAND_QIB_DCA
-static void reset_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m)
+static void reset_dca_notifier(struct qib_devdata *dd, int msixnum)
{
- if (!m->dca)
+ if (!dd->cspec->msix_entries[msixnum].dca)
return;
- qib_devinfo(dd->pcidev,
- "Disabling notifier on HCA %d irq %d\n",
- dd->unit,
- m->irq);
- irq_set_affinity_notifier(
- m->irq,
- NULL);
- m->notifier = NULL;
+
+ qib_devinfo(dd->pcidev, "Disabling notifier on HCA %d irq %d\n",
+ dd->unit, pci_irq_vector(dd->pcidev, msixnum));
+ irq_set_affinity_notifier(pci_irq_vector(dd->pcidev, msixnum), NULL);
+ dd->cspec->msix_entries[msixnum].notifier = NULL;
}
-static void setup_dca_notifier(struct qib_devdata *dd, struct qib_msix_entry *m)
+static void setup_dca_notifier(struct qib_devdata *dd, int msixnum)
{
+ struct qib_msix_entry *m = &dd->cspec->msix_entries[msixnum];
struct qib_irq_notify *n;
if (!m->dca)
int ret;
m->notifier = n;
- n->notify.irq = m->irq;
+ n->notify.irq = pci_irq_vector(dd->pcidev, msixnum);
n->notify.notify = qib_irq_notifier_notify;
n->notify.release = qib_irq_notifier_release;
n->arg = m->arg;
if (!dd->cspec->num_msix_entries) {
/* Try to get INTx interrupt */
try_intx:
- if (!dd->pcidev->irq) {
- qib_dev_err(dd,
- "irq is 0, BIOS error? Interrupts won't work\n");
- goto bail;
- }
- ret = request_irq(dd->pcidev->irq, qib_7322intr,
- IRQF_SHARED, QIB_DRV_NAME, dd);
+ ret = pci_request_irq(dd->pcidev, 0, qib_7322intr, NULL, dd,
+ QIB_DRV_NAME);
if (ret) {
- qib_dev_err(dd,
+ qib_dev_err(
+ dd,
"Couldn't setup INTx interrupt (irq=%d): %d\n",
- dd->pcidev->irq, ret);
- goto bail;
+ pci_irq_vector(dd->pcidev, 0), ret);
+ return;
}
- dd->cspec->irq = dd->pcidev->irq;
dd->cspec->main_int_mask = ~0ULL;
- goto bail;
+ return;
}
/* Try to get MSIx interrupts */
#ifdef CONFIG_INFINIBAND_QIB_DCA
int dca = 0;
#endif
-
- dd->cspec->msix_entries[msixnum].
- name[sizeof(dd->cspec->msix_entries[msixnum].name) - 1]
- = '\0';
if (i < ARRAY_SIZE(irq_table)) {
if (irq_table[i].port) {
/* skip if for a non-configured port */
#endif
lsb = irq_table[i].lsb;
handler = irq_table[i].handler;
- snprintf(dd->cspec->msix_entries[msixnum].name,
- sizeof(dd->cspec->msix_entries[msixnum].name)
- - 1,
- QIB_DRV_NAME "%d%s", dd->unit,
- irq_table[i].name);
+ ret = pci_request_irq(dd->pcidev, msixnum, handler,
+ NULL, arg, QIB_DRV_NAME "%d%s",
+ dd->unit,
+ irq_table[i].name);
} else {
unsigned ctxt;
#endif
lsb = QIB_I_RCVAVAIL_LSB + ctxt;
handler = qib_7322pintr;
- snprintf(dd->cspec->msix_entries[msixnum].name,
- sizeof(dd->cspec->msix_entries[msixnum].name)
- - 1,
- QIB_DRV_NAME "%d (kctx)", dd->unit);
+ ret = pci_request_irq(dd->pcidev, msixnum, handler,
+ NULL, arg,
+ QIB_DRV_NAME "%d (kctx)",
+ dd->unit);
}
- dd->cspec->msix_entries[msixnum].irq = pci_irq_vector(
- dd->pcidev, msixnum);
- if (dd->cspec->msix_entries[msixnum].irq < 0) {
- qib_dev_err(dd,
- "Couldn't get MSIx irq (vec=%d): %d\n",
- msixnum,
- dd->cspec->msix_entries[msixnum].irq);
- qib_7322_nomsix(dd);
- goto try_intx;
- }
- ret = request_irq(dd->cspec->msix_entries[msixnum].irq,
- handler, 0,
- dd->cspec->msix_entries[msixnum].name,
- arg);
if (ret) {
/*
* Shouldn't happen since the enable said we could
* have as many as we are trying to setup here.
*/
qib_dev_err(dd,
- "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n",
- msixnum,
- dd->cspec->msix_entries[msixnum].irq,
- ret);
- qib_7322_nomsix(dd);
+ "Couldn't setup MSIx interrupt (vec=%d, irq=%d): %d\n",
+ msixnum,
+ pci_irq_vector(dd->pcidev, msixnum),
+ ret);
+ qib_7322_free_irq(dd);
+ pci_alloc_irq_vectors(dd->pcidev, 1, 1,
+ PCI_IRQ_LEGACY);
goto try_intx;
}
dd->cspec->msix_entries[msixnum].arg = arg;
dd->cspec->msix_entries[msixnum].mask);
}
irq_set_affinity_hint(
- dd->cspec->msix_entries[msixnum].irq,
+ pci_irq_vector(dd->pcidev, msixnum),
dd->cspec->msix_entries[msixnum].mask);
}
msixnum++;
dd->cspec->main_int_mask = mask;
tasklet_init(&dd->error_tasklet, qib_error_tasklet,
(unsigned long)dd);
-bail:;
}
/**
/* no interrupts till re-initted */
qib_7322_set_intr_state(dd, 0);
+ qib_7322_free_irq(dd);
+
if (msix_entries) {
- qib_7322_nomsix(dd);
/* can be up to 512 bytes, too big for stack */
msix_vecsave = kmalloc(2 * dd->cspec->num_msix_entries *
sizeof(u64), GFP_KERNEL);
write_7322_init_portregs(&dd->pport[i]);
write_7322_initregs(dd);
- if (qib_pcie_params(dd, dd->lbus_width,
- &dd->cspec->num_msix_entries))
+ if (qib_pcie_params(dd, dd->lbus_width, &msix_entries))
qib_dev_err(dd,
"Reset failed to setup PCIe or interrupts; continuing anyway\n");
+ dd->cspec->num_msix_entries = msix_entries;
qib_setup_7322_interrupt(dd, 1);
for (i = 0; i < dd->num_pports; ++i) {
qib_devinfo(dd->pcidev,
"MSIx interrupt not detected, trying INTx interrupts\n");
- qib_7322_nomsix(dd);
- qib_enable_intx(dd);
+ qib_7322_free_irq(dd);
+ if (pci_alloc_irq_vectors(dd->pcidev, 1, 1, PCI_IRQ_LEGACY) < 0)
+ qib_dev_err(dd, "Failed to enable INTx\n");
qib_setup_7322_interrupt(dd, 0);
return 1;
}
* chip reset (the kernel PCI infrastructure doesn't yet handle that
* correctly.
*/
-static void qib_msi_setup(struct qib_devdata *dd, int pos)
+static void qib_cache_msi_info(struct qib_devdata *dd, int pos)
{
struct pci_dev *pdev = dd->pcidev;
u16 control;
&dd->msi_data);
}
-static int qib_allocate_irqs(struct qib_devdata *dd, u32 maxvec)
-{
- unsigned int flags = PCI_IRQ_LEGACY;
-
- /* Check our capabilities */
- if (dd->pcidev->msix_cap) {
- flags |= PCI_IRQ_MSIX;
- } else {
- if (dd->pcidev->msi_cap) {
- flags |= PCI_IRQ_MSI;
- /* Get msi_lo and msi_hi */
- qib_msi_setup(dd, dd->pcidev->msi_cap);
- }
- }
-
- if (!(flags & (PCI_IRQ_MSIX | PCI_IRQ_MSI)))
- qib_dev_err(dd, "No PCI MSI or MSIx capability!\n");
-
- return pci_alloc_irq_vectors(dd->pcidev, 1, maxvec, flags);
-}
-
int qib_pcie_params(struct qib_devdata *dd, u32 minw, u32 *nent)
{
u16 linkstat, speed;
int nvec;
int maxvec;
- int ret = 0;
+ unsigned int flags = PCI_IRQ_MSIX | PCI_IRQ_MSI;
if (!pci_is_pcie(dd->pcidev)) {
qib_dev_err(dd, "Can't find PCI Express capability!\n");
/* set up something... */
dd->lbus_width = 1;
dd->lbus_speed = 2500; /* Gen1, 2.5GHz */
- ret = -1;
+ nvec = -1;
goto bail;
}
+ if (dd->flags & QIB_HAS_INTX)
+ flags |= PCI_IRQ_LEGACY;
maxvec = (nent && *nent) ? *nent : 1;
- nvec = qib_allocate_irqs(dd, maxvec);
- if (nvec < 0) {
- ret = nvec;
+ nvec = pci_alloc_irq_vectors(dd->pcidev, 1, maxvec, flags);
+ if (nvec < 0)
goto bail;
- }
/*
- * If nent exists, make sure to record how many vectors were allocated
+ * If nent exists, make sure to record how many vectors were allocated.
+ * If msix_enabled is false, return 0 so the fallback code works
+ * correctly.
*/
- if (nent) {
- *nent = nvec;
+ if (nent)
+ *nent = !dd->pcidev->msix_enabled ? 0 : nvec;
- /*
- * If we requested (nent) MSIX, but msix_enabled is not set,
- * pci_alloc_irq_vectors() enabled INTx.
- */
- if (!dd->pcidev->msix_enabled)
- qib_dev_err(dd,
- "no msix vectors allocated, using INTx\n");
- }
+ if (dd->pcidev->msi_enabled)
+ qib_cache_msi_info(dd, dd->pcidev->msi_cap);
pcie_capability_read_word(dd->pcidev, PCI_EXP_LNKSTA, &linkstat);
/*
/* fill in string, even on errors */
snprintf(dd->lbus_info, sizeof(dd->lbus_info),
"PCIe,%uMHz,x%u\n", dd->lbus_speed, dd->lbus_width);
- return ret;
+ return nvec < 0 ? nvec : 0;
+}
+
+/**
+ * qib_free_irq - Cleanup INTx and MSI interrupts
+ * @dd: valid pointer to qib dev data
+ *
+ * Since cleanup for INTx and MSI interrupts is trivial, have a common
+ * routine.
+ *
+ */
+void qib_free_irq(struct qib_devdata *dd)
+{
+ pci_free_irq(dd->pcidev, 0, dd);
+ pci_free_irq_vectors(dd->pcidev);
}
/*
dd->msi_data);
ret = 1;
bail:
- if (!ret && (dd->flags & QIB_HAS_INTX)) {
- qib_enable_intx(dd);
+ qib_free_irq(dd);
+
+ if (!ret && (dd->flags & QIB_HAS_INTX))
ret = 1;
- }
/* and now set the pci master bit again */
pci_set_master(dd->pcidev);
return ret;
}
-/*
- * Disable msi interrupt if enabled, and clear msi_lo.
- * This is used primarily for the fallback to INTx, but
- * is also used in reinit after reset, and during cleanup.
- */
-void qib_nomsi(struct qib_devdata *dd)
-{
- dd->msi_lo = 0;
- pci_free_irq_vectors(dd->pcidev);
-}
-
-/*
- * Same as qib_nosmi, but for MSIx.
- */
-void qib_nomsix(struct qib_devdata *dd)
-{
- pci_free_irq_vectors(dd->pcidev);
-}
-
-/*
- * Similar to pci_intx(pdev, 1), except that we make sure
- * msi(x) is off.
- */
-void qib_enable_intx(struct qib_devdata *dd)
-{
- u16 cw, new;
- int pos;
- struct pci_dev *pdev = dd->pcidev;
-
- if (pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_LEGACY) < 0)
- qib_dev_err(dd, "Failed to enable INTx\n");
-
- pos = pdev->msi_cap;
- if (pos) {
- /* then turn off MSI */
- pci_read_config_word(pdev, pos + PCI_MSI_FLAGS, &cw);
- new = cw & ~PCI_MSI_FLAGS_ENABLE;
- if (new != cw)
- pci_write_config_word(pdev, pos + PCI_MSI_FLAGS, new);
- }
- pos = pdev->msix_cap;
- if (pos) {
- /* then turn off MSIx */
- pci_read_config_word(pdev, pos + PCI_MSIX_FLAGS, &cw);
- new = cw & ~PCI_MSIX_FLAGS_ENABLE;
- if (new != cw)
- pci_write_config_word(pdev, pos + PCI_MSIX_FLAGS, new);
- }
-}
-
/*
* These two routines are helper routines for the device reset code
* to move all the pcie code out of the chip-specific driver code.