ARM: dts: qcom: pma8084: add interrupt controller properties

Add interrupt controller properties now that spmi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

This change was not tested on any hardware but the same change was
tested on qcom-pm8941.dtsi using a LG Nexus 5 (hammerhead) phone with
no issues.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index aac7e73b687299f48430afbe4d75b89e8771a3bd..8f5ea7add20f1100a615e06bf7cf06c149f721c0 100644 (file)
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -32,28 +32,8 @@ pma8084_gpios: gpios@c000 {
                        reg = <0xc000>;
                        gpio-controller;
                        #gpio-cells = <2>;
-                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
-                                    <0 0xc1 0 IRQ_TYPE_NONE>,
-                                    <0 0xc2 0 IRQ_TYPE_NONE>,
-                                    <0 0xc3 0 IRQ_TYPE_NONE>,
-                                    <0 0xc4 0 IRQ_TYPE_NONE>,
-                                    <0 0xc5 0 IRQ_TYPE_NONE>,
-                                    <0 0xc6 0 IRQ_TYPE_NONE>,
-                                    <0 0xc7 0 IRQ_TYPE_NONE>,
-                                    <0 0xc8 0 IRQ_TYPE_NONE>,
-                                    <0 0xc9 0 IRQ_TYPE_NONE>,
-                                    <0 0xca 0 IRQ_TYPE_NONE>,
-                                    <0 0xcb 0 IRQ_TYPE_NONE>,
-                                    <0 0xcc 0 IRQ_TYPE_NONE>,
-                                    <0 0xcd 0 IRQ_TYPE_NONE>,
-                                    <0 0xce 0 IRQ_TYPE_NONE>,
-                                    <0 0xcf 0 IRQ_TYPE_NONE>,
-                                    <0 0xd0 0 IRQ_TYPE_NONE>,
-                                    <0 0xd1 0 IRQ_TYPE_NONE>,
-                                    <0 0xd2 0 IRQ_TYPE_NONE>,
-                                    <0 0xd3 0 IRQ_TYPE_NONE>,
-                                    <0 0xd4 0 IRQ_TYPE_NONE>,
-                                    <0 0xd5 0 IRQ_TYPE_NONE>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
                };
 
                pma8084_mpps: mpps@a000 {