gpio: 104-idio-16: Use devm_request_region

By the time request_region is called in the ACCES 104-IDIO-16 GPIO
driver, a corresponding device structure has already been allocated. The
devm_request_region function should be used to help simplify the cleanup
code and reduce the possible points of failure.

Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/gpio/gpio-104-idio-16.c b/drivers/gpio/gpio-104-idio-16.c
index d0f797662845fedf76f2c5b30399713f110f8237..ecc85fe9323d3476f9df864f59d3328d134f4073 100644 (file)
--- a/drivers/gpio/gpio-104-idio-16.c
+++ b/drivers/gpio/gpio-104-idio-16.c
@@ -38,7 +38,6 @@ MODULE_PARM_DESC(idio_16_irq, "ACCES 104-IDIO-16 interrupt line number");
  * @lock:      synchronization lock to prevent I/O race conditions
  * @irq_mask:  I/O bits affected by interrupts
  * @base:      base port address of the GPIO device
- * @extent:    extent of port address region of the GPIO device
  * @irq:       Interrupt line number
  * @out_state: output bits state
  */
@@ -47,7 +46,6 @@ struct idio_16_gpio {
        spinlock_t lock;
        unsigned long irq_mask;
        unsigned base;
-       unsigned extent;
        unsigned irq;
        unsigned out_state;
 };
@@ -201,11 +199,10 @@ static int __init idio_16_probe(struct platform_device *pdev)
        if (!idio16gpio)
                return -ENOMEM;
 
-       if (!request_region(base, extent, name)) {
-               dev_err(dev, "Unable to lock %s port addresses (0x%X-0x%X)\n",
-                       name, base, base + extent);
-               err = -EBUSY;
-               goto err_lock_io_port;
+       if (!devm_request_region(dev, base, extent, name)) {
+               dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
+                       base, base + extent);
+               return -EBUSY;
        }
 
        idio16gpio->chip.label = name;
@@ -219,7 +216,6 @@ static int __init idio_16_probe(struct platform_device *pdev)
        idio16gpio->chip.get = idio_16_gpio_get;
        idio16gpio->chip.set = idio_16_gpio_set;
        idio16gpio->base = base;
-       idio16gpio->extent = extent;
        idio16gpio->irq = irq;
        idio16gpio->out_state = 0xFFFF;
 
@@ -230,7 +226,7 @@ static int __init idio_16_probe(struct platform_device *pdev)
        err = gpiochip_add_data(&idio16gpio->chip, idio16gpio);
        if (err) {
                dev_err(dev, "GPIO registering failed (%d)\n", err);
-               goto err_gpio_register;
+               return err;
        }
 
        /* Disable IRQ by default */
@@ -241,23 +237,19 @@ static int __init idio_16_probe(struct platform_device *pdev)
                handle_edge_irq, IRQ_TYPE_NONE);
        if (err) {
                dev_err(dev, "Could not add irqchip (%d)\n", err);
-               goto err_gpiochip_irqchip_add;
+               goto err_gpiochip_remove;
        }
 
        err = request_irq(irq, idio_16_irq_handler, 0, name, idio16gpio);
        if (err) {
                dev_err(dev, "IRQ handler registering failed (%d)\n", err);
-               goto err_request_irq;
+               goto err_gpiochip_remove;
        }
 
        return 0;
 
-err_request_irq:
-err_gpiochip_irqchip_add:
+err_gpiochip_remove:
        gpiochip_remove(&idio16gpio->chip);
-err_gpio_register:
-       release_region(base, extent);
-err_lock_io_port:
        return err;
 }
 
@@ -267,7 +259,6 @@ static int idio_16_remove(struct platform_device *pdev)
 
        free_irq(idio16gpio->irq, idio16gpio);
        gpiochip_remove(&idio16gpio->chip);
-       release_region(idio16gpio->base, idio16gpio->extent);
 
        return 0;
 }