]> asedeno.scripts.mit.edu Git - linux.git/commitdiff
ARM: OMAP2+: Add device-tree support for NOR flash
authorJon Hunter <jon-hunter@ti.com>
Fri, 8 Feb 2013 22:46:13 +0000 (16:46 -0600)
committerJon Hunter <jon-hunter@ti.com>
Thu, 4 Apr 2013 01:13:38 +0000 (20:13 -0500)
NOR flash is not currently supported when booting with device-tree
on OMAP2+ devices. Add support to detect and configure NOR devices
when booting with device-tree.

Add documentation for the TI GPMC NOR binding.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Documentation/devicetree/bindings/mtd/gpmc-nor.txt [new file with mode: 0644]
arch/arm/mach-omap2/gpmc.c

diff --git a/Documentation/devicetree/bindings/mtd/gpmc-nor.txt b/Documentation/devicetree/bindings/mtd/gpmc-nor.txt
new file mode 100644 (file)
index 0000000..420b3ab
--- /dev/null
@@ -0,0 +1,98 @@
+Device tree bindings for NOR flash connect to TI GPMC
+
+NOR flash connected to the TI GPMC (found on OMAP boards) are represented as
+child nodes of the GPMC controller with a name of "nor".
+
+All timing relevant properties as well as generic GPMC child properties are
+explained in a separate documents. Please refer to
+Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Required properties:
+- bank-width:          Width of NOR flash in bytes. GPMC supports 8-bit and
+                       16-bit devices and so must be either 1 or 2 bytes.
+- compatible:          Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- gpmc,cs-on-ns:               Chip-select assertion time
+- gpmc,cs-rd-off-ns:   Chip-select de-assertion time for reads
+- gpmc,cs-wr-off-ns:   Chip-select de-assertion time for writes
+- gpmc,oe-on-ns:       Output-enable assertion time
+- gpmc,oe-off-ns:      Output-enable de-assertion time
+- gpmc,we-on-ns                Write-enable assertion time
+- gpmc,we-off-ns:      Write-enable de-assertion time
+- gpmc,access-ns:      Start cycle to first data capture (read access)
+- gpmc,rd-cycle-ns:    Total read cycle time
+- gpmc,wr-cycle-ns:    Total write cycle time
+- linux,mtd-name:      Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+- reg:                 Chip-select, base address (relative to chip-select)
+                       and size of NOR flash. Note that base address will be
+                       typically 0 as this is the start of the chip-select.
+
+Optional properties:
+- gpmc,XXX             Additional GPMC timings and settings parameters. See
+                       Documentation/devicetree/bindings/bus/ti-gpmc.txt
+
+Optional properties for partiton table parsing:
+- #address-cells: should be set to 1
+- #size-cells: should be set to 1
+
+Example:
+
+gpmc: gpmc@6e000000 {
+       compatible = "ti,omap3430-gpmc", "simple-bus";
+       ti,hwmods = "gpmc";
+       reg = <0x6e000000 0x1000>;
+       interrupts = <20>;
+       gpmc,num-cs = <8>;
+       gpmc,num-waitpins = <4>;
+       #address-cells = <2>;
+       #size-cells = <1>;
+
+       ranges = <0 0 0x10000000 0x08000000>;
+
+       nor@0,0 {
+               compatible = "cfi-flash";
+               linux,mtd-name= "intel,pf48f6000m0y1be";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               reg = <0 0 0x08000000>;
+               bank-width = <2>;
+
+               gpmc,mux-add-data;
+               gpmc,cs-on-ns = <0>;
+               gpmc,cs-rd-off-ns = <186>;
+               gpmc,cs-wr-off-ns = <186>;
+               gpmc,adv-on-ns = <12>;
+               gpmc,adv-rd-off-ns = <48>;
+               gpmc,adv-wr-off-ns = <48>;
+               gpmc,oe-on-ns = <54>;
+               gpmc,oe-off-ns = <168>;
+               gpmc,we-on-ns = <54>;
+               gpmc,we-off-ns = <168>;
+               gpmc,rd-cycle-ns = <186>;
+               gpmc,wr-cycle-ns = <186>;
+               gpmc,access-ns = <114>;
+               gpmc,page-burst-access-ns = <6>;
+               gpmc,bus-turnaround-ns = <12>;
+               gpmc,cycle2cycle-delay-ns = <18>;
+               gpmc,wr-data-mux-bus-ns = <90>;
+               gpmc,wr-access-ns = <186>;
+               gpmc,cycle2cycle-samecsen;
+               gpmc,cycle2cycle-diffcsen;
+
+               partition@0 {
+                       label = "bootloader-nor";
+                       reg = <0 0x40000>;
+               };
+               partition@0x40000 {
+                       label = "params-nor";
+                       reg = <0x40000 0x40000>;
+               };
+               partition@0x80000 {
+                       label = "kernel-nor";
+                       reg = <0x80000 0x200000>;
+               };
+               partition@0x280000 {
+                       label = "filesystem-nor";
+                       reg = <0x240000 0x7d80000>;
+               };
+       };
+};
index ab658eb1419b9d7027ade07b2209bbd3dff3f50d..c7bf6ddf04ed163f2f179f024aeb68cf3fa6bc5d 100644 (file)
@@ -26,6 +26,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/of.h>
+#include <linux/of_address.h>
 #include <linux/of_mtd.h>
 #include <linux/of_device.h>
 #include <linux/mtd/nand.h>
@@ -499,6 +500,37 @@ static int gpmc_cs_delete_mem(int cs)
        return r;
 }
 
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs:                chip-select to remap
+ * @base:      physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+       int ret;
+       u32 old_base, size;
+
+       if (cs > GPMC_CS_NUM)
+               return -ENODEV;
+       gpmc_cs_get_memconf(cs, &old_base, &size);
+       if (base == old_base)
+               return 0;
+       gpmc_cs_disable_mem(cs);
+       ret = gpmc_cs_delete_mem(cs);
+       if (ret < 0)
+               return ret;
+       ret = gpmc_cs_insert_mem(cs, base, size);
+       if (ret < 0)
+               return ret;
+       gpmc_cs_enable_mem(cs, base, size);
+
+       return 0;
+}
+
 int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
 {
        struct resource *res = &gpmc_cs_mem[cs];
@@ -1386,6 +1418,80 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev,
 }
 #endif
 
+/**
+ * gpmc_probe_nor_child - configures the gpmc for a nor device
+ * @pdev:      pointer to gpmc platform device
+ * @child:     pointer to device-tree node for nor device
+ *
+ * Allocates and configures a GPMC chip-select for a NOR flash device.
+ * Returns 0 on success and appropriate negative error code on failure.
+ */
+static int gpmc_probe_nor_child(struct platform_device *pdev,
+                               struct device_node *child)
+{
+       struct gpmc_settings gpmc_s;
+       struct gpmc_timings gpmc_t;
+       struct resource res;
+       unsigned long base;
+       int ret, cs;
+
+       if (of_property_read_u32(child, "reg", &cs) < 0) {
+               dev_err(&pdev->dev, "%s has no 'reg' property\n",
+                       child->full_name);
+               return -ENODEV;
+       }
+
+       if (of_address_to_resource(child, 0, &res) < 0) {
+               dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+                       child->full_name);
+               return -ENODEV;
+       }
+
+       ret = gpmc_cs_request(cs, resource_size(&res), &base);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+               return ret;
+       }
+
+       /*
+        * FIXME: gpmc_cs_request() will map the CS to an arbitary
+        * location in the gpmc address space. When booting with
+        * device-tree we want the NOR flash to be mapped to the
+        * location specified in the device-tree blob. So remap the
+        * CS to this location. Once DT migration is complete should
+        * just make gpmc_cs_request() map a specific address.
+        */
+       ret = gpmc_cs_remap(cs, res.start);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n",
+                       cs, res.start);
+               goto err;
+       }
+
+       gpmc_read_settings_dt(child, &gpmc_s);
+
+       ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
+       if (ret < 0)
+               goto err;
+
+       ret = gpmc_cs_program_settings(cs, &gpmc_s);
+       if (ret < 0)
+               goto err;
+
+       gpmc_read_timings_dt(child, &gpmc_t);
+       gpmc_cs_set_timings(cs, &gpmc_t);
+
+       if (of_platform_device_create(child, NULL, &pdev->dev))
+               return 0;
+
+       dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+
+err:
+       gpmc_cs_free(cs);
+
+       return ret;
+}
+
 static int gpmc_probe_dt(struct platform_device *pdev)
 {
        int ret;
@@ -1418,6 +1524,15 @@ static int gpmc_probe_dt(struct platform_device *pdev)
                        return ret;
                }
        }
+
+       for_each_node_by_name(child, "nor") {
+               ret = gpmc_probe_nor_child(pdev, child);
+               if (ret < 0) {
+                       of_node_put(child);
+                       return ret;
+               }
+       }
+
        return 0;
 }
 #else