config ZONE_DMA32
def_bool y
- depends on !IA64_SGI_SN2
config QUICKLIST
bool
DIG+Intel+IOMMU For DIG systems with Intel IOMMU
HP-zx1/sx1000 For HP systems
HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices.
- SGI-SN2 For SGI Altix systems
SGI-UV For SGI UV systems
Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/>
I/O TLB, which allows supporting the broken devices at the expense of
wasting some kernel memory (about 2MB by default).
-config IA64_SGI_SN2
- bool "SGI-SN2"
- select NUMA
- select ACPI_NUMA
- help
- Selecting this option will optimize the kernel for use on sn2 based
- systems, but the resulting kernel binary will not run on other
- types of ia64 systems. If you have an SGI Altix system, it's safe
- to select this option. If in doubt, select ia64 generic support
- instead.
-
config IA64_SGI_UV
bool "SGI-UV"
select NUMA
select SPARSEMEM_VMEMMAP_ENABLE
config ARCH_DISCONTIGMEM_DEFAULT
- def_bool y if (IA64_SGI_SN2 || IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
+ def_bool y if (IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
depends on ARCH_DISCONTIGMEM_ENABLE
config NUMA
bool "NUMA support"
depends on !IA64_HP_SIM && !FLATMEM
- default y if IA64_SGI_SN2
select ACPI_NUMA if ACPI
help
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
If you're unsure, do not select this option.
-config SGI_SN
- def_bool y if (IA64_SGI_SN2 || IA64_GENERIC)
-
config IA64_ESI
bool "ESI (Extensible SAL Interface) support"
help
config IA64_GRANULE_64MB
bool "64MB"
- depends on !(IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB || IA64_SGI_SN2)
+ depends on !(IA64_GENERIC || IA64_HP_ZX1 || IA64_HP_ZX1_SWIOTLB)
endchoice
core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/
core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/
-core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/
core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/
drivers-$(CONFIG_PCI) += arch/ia64/pci/
drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/
drivers-$(CONFIG_IA64_HP_ZX1) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
drivers-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/hp/common/ arch/ia64/hp/zx1/
-drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/sn/ arch/ia64/uv/
+drivers-$(CONFIG_IA64_GENERIC) += arch/ia64/hp/common/ arch/ia64/hp/zx1/ arch/ia64/hp/sim/ arch/ia64/uv/
drivers-$(CONFIG_OPROFILE) += arch/ia64/oprofile/
boot := arch/ia64/hp/sim/boot
return "hpzx1";
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
return "hpzx1_swiotlb";
-# elif defined (CONFIG_IA64_SGI_SN2)
- return "sn2";
# elif defined (CONFIG_IA64_SGI_UV)
return "uv";
# elif defined (CONFIG_IA64_DIG)
}
extern void set_irq_affinity_info (unsigned int irq, int dest, int redir);
-bool is_affinity_mask_valid(const struct cpumask *cpumask);
-
-#define is_affinity_mask_valid is_affinity_mask_valid
int create_irq(void);
void destroy_irq(unsigned int irq);
# include <asm/machvec_hpzx1.h>
# elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB)
# include <asm/machvec_hpzx1_swiotlb.h>
-# elif defined (CONFIG_IA64_SGI_SN2)
-# include <asm/machvec_sn2.h>
# elif defined (CONFIG_IA64_SGI_UV)
# include <asm/machvec_uv.h>
# elif defined (CONFIG_IA64_GENERIC)
+++ /dev/null
-/*
- * Copyright (c) 2002-2003,2006 Silicon Graphics, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * For further information regarding this notice, see:
- *
- * http://oss.sgi.com/projects/GenInfo/NoticeExplan
- */
-
-#ifndef _ASM_IA64_MACHVEC_SN2_H
-#define _ASM_IA64_MACHVEC_SN2_H
-
-extern ia64_mv_setup_t sn_setup;
-extern ia64_mv_cpu_init_t sn_cpu_init;
-extern ia64_mv_irq_init_t sn_irq_init;
-extern ia64_mv_send_ipi_t sn2_send_IPI;
-extern ia64_mv_timer_interrupt_t sn_timer_interrupt;
-extern ia64_mv_global_tlb_purge_t sn2_global_tlb_purge;
-extern ia64_mv_irq_to_vector sn_irq_to_vector;
-extern ia64_mv_local_vector_to_irq sn_local_vector_to_irq;
-extern ia64_mv_pci_get_legacy_mem_t sn_pci_get_legacy_mem;
-extern ia64_mv_pci_legacy_read_t sn_pci_legacy_read;
-extern ia64_mv_pci_legacy_write_t sn_pci_legacy_write;
-extern ia64_mv_inb_t __sn_inb;
-extern ia64_mv_inw_t __sn_inw;
-extern ia64_mv_inl_t __sn_inl;
-extern ia64_mv_outb_t __sn_outb;
-extern ia64_mv_outw_t __sn_outw;
-extern ia64_mv_outl_t __sn_outl;
-extern ia64_mv_mmiowb_t __sn_mmiowb;
-extern ia64_mv_readb_t __sn_readb;
-extern ia64_mv_readw_t __sn_readw;
-extern ia64_mv_readl_t __sn_readl;
-extern ia64_mv_readq_t __sn_readq;
-extern ia64_mv_readb_t __sn_readb_relaxed;
-extern ia64_mv_readw_t __sn_readw_relaxed;
-extern ia64_mv_readl_t __sn_readl_relaxed;
-extern ia64_mv_readq_t __sn_readq_relaxed;
-extern ia64_mv_dma_init sn_dma_init;
-extern ia64_mv_migrate_t sn_migrate;
-extern ia64_mv_kernel_launch_event_t sn_kernel_launch_event;
-extern ia64_mv_setup_msi_irq_t sn_setup_msi_irq;
-extern ia64_mv_teardown_msi_irq_t sn_teardown_msi_irq;
-extern ia64_mv_pci_fixup_bus_t sn_pci_fixup_bus;
-
-
-/*
- * This stuff has dual use!
- *
- * For a generic kernel, the macros are used to initialize the
- * platform's machvec structure. When compiling a non-generic kernel,
- * the macros are used directly.
- */
-#define ia64_platform_name "sn2"
-#define platform_setup sn_setup
-#define platform_cpu_init sn_cpu_init
-#define platform_irq_init sn_irq_init
-#define platform_send_ipi sn2_send_IPI
-#define platform_timer_interrupt sn_timer_interrupt
-#define platform_global_tlb_purge sn2_global_tlb_purge
-#define platform_pci_fixup sn_pci_fixup
-#define platform_inb __sn_inb
-#define platform_inw __sn_inw
-#define platform_inl __sn_inl
-#define platform_outb __sn_outb
-#define platform_outw __sn_outw
-#define platform_outl __sn_outl
-#define platform_mmiowb __sn_mmiowb
-#define platform_readb __sn_readb
-#define platform_readw __sn_readw
-#define platform_readl __sn_readl
-#define platform_readq __sn_readq
-#define platform_readb_relaxed __sn_readb_relaxed
-#define platform_readw_relaxed __sn_readw_relaxed
-#define platform_readl_relaxed __sn_readl_relaxed
-#define platform_readq_relaxed __sn_readq_relaxed
-#define platform_irq_to_vector sn_irq_to_vector
-#define platform_local_vector_to_irq sn_local_vector_to_irq
-#define platform_pci_get_legacy_mem sn_pci_get_legacy_mem
-#define platform_pci_legacy_read sn_pci_legacy_read
-#define platform_pci_legacy_write sn_pci_legacy_write
-#define platform_dma_init sn_dma_init
-#define platform_migrate sn_migrate
-#define platform_kernel_launch_event sn_kernel_launch_event
-#ifdef CONFIG_PCI_MSI
-#define platform_setup_msi_irq sn_setup_msi_irq
-#define platform_teardown_msi_irq sn_teardown_msi_irq
-#else
-#define platform_setup_msi_irq ((ia64_mv_setup_msi_irq_t*)NULL)
-#define platform_teardown_msi_irq ((ia64_mv_teardown_msi_irq_t*)NULL)
-#endif
-#define platform_pci_fixup_bus sn_pci_fixup_bus
-
-#include <asm/sn/io.h>
-
-#endif /* _ASM_IA64_MACHVEC_SN2_H */
#ifdef CONFIG_IA64_DIG /* DIG systems are small */
# define MAX_PHYSNODE_ID 8
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 8)
-#else /* sn2 is the biggest case, so we use that if !DIG */
+#else
# define MAX_PHYSNODE_ID 2048
# define NR_NODE_MEMBLKS (MAX_NUMNODES * 4)
#endif
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ACPI_H
-#define _ASM_IA64_SN_ACPI_H
-
-extern int sn_acpi_rev;
-#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101)
-
-#endif /* _ASM_IA64_SN_ACPI_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 1992-1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_ADDRS_H
-#define _ASM_IA64_SN_ADDRS_H
-
-#include <asm/percpu.h>
-#include <asm/sn/types.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/pda.h>
-
-/*
- * Memory/SHUB Address Format:
- * +-+---------+--+--------------+
- * |0| NASID |AS| NodeOffset |
- * +-+---------+--+--------------+
- *
- * NASID: (low NASID bit is 0) Memory and SHUB MMRs
- * AS: 2-bit Address Space Identifier. Used only if low NASID bit is 0
- * 00: Local Resources and MMR space
- * Top bit of NodeOffset
- * 0: Local resources space
- * node id:
- * 0: IA64/NT compatibility space
- * 2: Local MMR Space
- * 4: Local memory, regardless of local node id
- * 1: Global MMR space
- * 01: GET space.
- * 10: AMO space.
- * 11: Cacheable memory space.
- *
- * NodeOffset: byte offset
- *
- *
- * TIO address format:
- * +-+----------+--+--------------+
- * |0| NASID |AS| Nodeoffset |
- * +-+----------+--+--------------+
- *
- * NASID: (low NASID bit is 1) TIO
- * AS: 2-bit Chiplet Identifier
- * 00: TIO LB (Indicates TIO MMR access.)
- * 01: TIO ICE (indicates coretalk space access.)
- *
- * NodeOffset: top bit must be set.
- *
- *
- * Note that in both of the above address formats, the low
- * NASID bit indicates if the reference is to the SHUB or TIO MMRs.
- */
-
-
-/*
- * Define basic shift & mask constants for manipulating NASIDs and AS values.
- */
-#define NASID_BITMASK (sn_hub_info->nasid_bitmask)
-#define NASID_SHIFT (sn_hub_info->nasid_shift)
-#define AS_SHIFT (sn_hub_info->as_shift)
-#define AS_BITMASK 0x3UL
-
-#define NASID_MASK ((u64)NASID_BITMASK << NASID_SHIFT)
-#define AS_MASK ((u64)AS_BITMASK << AS_SHIFT)
-
-
-/*
- * AS values. These are the same on both SHUB1 & SHUB2.
- */
-#define AS_GET_VAL 1UL
-#define AS_AMO_VAL 2UL
-#define AS_CAC_VAL 3UL
-#define AS_GET_SPACE (AS_GET_VAL << AS_SHIFT)
-#define AS_AMO_SPACE (AS_AMO_VAL << AS_SHIFT)
-#define AS_CAC_SPACE (AS_CAC_VAL << AS_SHIFT)
-
-
-/*
- * Virtual Mode Local & Global MMR space.
- */
-#define SH1_LOCAL_MMR_OFFSET 0x8000000000UL
-#define SH2_LOCAL_MMR_OFFSET 0x0200000000UL
-#define LOCAL_MMR_OFFSET (is_shub2() ? SH2_LOCAL_MMR_OFFSET : SH1_LOCAL_MMR_OFFSET)
-#define LOCAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | LOCAL_MMR_OFFSET)
-#define LOCAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | LOCAL_MMR_OFFSET)
-
-#define SH1_GLOBAL_MMR_OFFSET 0x0800000000UL
-#define SH2_GLOBAL_MMR_OFFSET 0x0300000000UL
-#define GLOBAL_MMR_OFFSET (is_shub2() ? SH2_GLOBAL_MMR_OFFSET : SH1_GLOBAL_MMR_OFFSET)
-#define GLOBAL_MMR_SPACE (__IA64_UNCACHED_OFFSET | GLOBAL_MMR_OFFSET)
-
-/*
- * Physical mode addresses
- */
-#define GLOBAL_PHYS_MMR_SPACE (RGN_BASE(RGN_HPAGE) | GLOBAL_MMR_OFFSET)
-
-
-/*
- * Clear region & AS bits.
- */
-#define TO_PHYS_MASK (~(RGN_BITS | AS_MASK))
-
-
-/*
- * Misc NASID manipulation.
- */
-#define NASID_SPACE(n) ((u64)(n) << NASID_SHIFT)
-#define REMOTE_ADDR(n,a) (NASID_SPACE(n) | (a))
-#define NODE_OFFSET(x) ((x) & (NODE_ADDRSPACE_SIZE - 1))
-#define NODE_ADDRSPACE_SIZE (1UL << AS_SHIFT)
-#define NASID_GET(x) (int) (((u64) (x) >> NASID_SHIFT) & NASID_BITMASK)
-#define LOCAL_MMR_ADDR(a) (LOCAL_MMR_SPACE | (a))
-#define GLOBAL_MMR_ADDR(n,a) (GLOBAL_MMR_SPACE | REMOTE_ADDR(n,a))
-#define GLOBAL_MMR_PHYS_ADDR(n,a) (GLOBAL_PHYS_MMR_SPACE | REMOTE_ADDR(n,a))
-#define GLOBAL_CAC_ADDR(n,a) (CAC_BASE | REMOTE_ADDR(n,a))
-#define CHANGE_NASID(n,x) ((void *)(((u64)(x) & ~NASID_MASK) | NASID_SPACE(n)))
-#define IS_TIO_NASID(n) ((n) & 1)
-
-
-/* non-II mmr's start at top of big window space (4G) */
-#define BWIN_TOP 0x0000000100000000UL
-
-/*
- * general address defines
- */
-#define CAC_BASE (PAGE_OFFSET | AS_CAC_SPACE)
-#define AMO_BASE (__IA64_UNCACHED_OFFSET | AS_AMO_SPACE)
-#define AMO_PHYS_BASE (RGN_BASE(RGN_HPAGE) | AS_AMO_SPACE)
-#define GET_BASE (PAGE_OFFSET | AS_GET_SPACE)
-
-/*
- * Convert Memory addresses between various addressing modes.
- */
-#define TO_PHYS(x) (TO_PHYS_MASK & (x))
-#define TO_CAC(x) (CAC_BASE | TO_PHYS(x))
-#ifdef CONFIG_SGI_SN
-#define TO_AMO(x) (AMO_BASE | TO_PHYS(x))
-#define TO_GET(x) (GET_BASE | TO_PHYS(x))
-#else
-#define TO_AMO(x) ({ BUG(); x; })
-#define TO_GET(x) ({ BUG(); x; })
-#endif
-
-/*
- * Covert from processor physical address to II/TIO physical address:
- * II - squeeze out the AS bits
- * TIO- requires a chiplet id in bits 38-39. For DMA to memory,
- * the chiplet id is zero. If we implement TIO-TIO dma, we might need
- * to insert a chiplet id into this macro. However, it is our belief
- * right now that this chiplet id will be ICE, which is also zero.
- */
-#define SH1_TIO_PHYS_TO_DMA(x) \
- ((((u64)(NASID_GET(x))) << 40) | NODE_OFFSET(x))
-
-#define SH2_NETWORK_BANK_OFFSET(x) \
- ((u64)(x) & ((1UL << (sn_hub_info->nasid_shift - 4)) -1))
-
-#define SH2_NETWORK_BANK_SELECT(x) \
- ((((u64)(x) & (0x3UL << (sn_hub_info->nasid_shift - 4))) \
- >> (sn_hub_info->nasid_shift - 4)) << 36)
-
-#define SH2_NETWORK_ADDRESS(x) \
- (SH2_NETWORK_BANK_OFFSET(x) | SH2_NETWORK_BANK_SELECT(x))
-
-#define SH2_TIO_PHYS_TO_DMA(x) \
- (((u64)(NASID_GET(x)) << 40) | SH2_NETWORK_ADDRESS(x))
-
-#define PHYS_TO_TIODMA(x) \
- (is_shub1() ? SH1_TIO_PHYS_TO_DMA(x) : SH2_TIO_PHYS_TO_DMA(x))
-
-#define PHYS_TO_DMA(x) \
- ((((u64)(x) & NASID_MASK) >> 2) | NODE_OFFSET(x))
-
-
-/*
- * Macros to test for address type.
- */
-#define IS_AMO_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_BASE)
-#define IS_AMO_PHYS_ADDRESS(x) (((u64)(x) & (RGN_BITS | AS_MASK)) == AMO_PHYS_BASE)
-
-
-/*
- * The following definitions pertain to the IO special address
- * space. They define the location of the big and little windows
- * of any given node.
- */
-#define BWIN_SIZE_BITS 29 /* big window size: 512M */
-#define TIO_BWIN_SIZE_BITS 30 /* big window size: 1G */
-#define NODE_SWIN_BASE(n, w) ((w == 0) ? NODE_BWIN_BASE((n), SWIN0_BIGWIN) \
- : RAW_NODE_SWIN_BASE(n, w))
-#define TIO_SWIN_BASE(n, w) (TIO_IO_BASE(n) + \
- ((u64) (w) << TIO_SWIN_SIZE_BITS))
-#define NODE_IO_BASE(n) (GLOBAL_MMR_SPACE | NASID_SPACE(n))
-#define TIO_IO_BASE(n) (__IA64_UNCACHED_OFFSET | NASID_SPACE(n))
-#define BWIN_SIZE (1UL << BWIN_SIZE_BITS)
-#define NODE_BWIN_BASE0(n) (NODE_IO_BASE(n) + BWIN_SIZE)
-#define NODE_BWIN_BASE(n, w) (NODE_BWIN_BASE0(n) + ((u64) (w) << BWIN_SIZE_BITS))
-#define RAW_NODE_SWIN_BASE(n, w) (NODE_IO_BASE(n) + ((u64) (w) << SWIN_SIZE_BITS))
-#define BWIN_WIDGET_MASK 0x7
-#define BWIN_WINDOWNUM(x) (((x) >> BWIN_SIZE_BITS) & BWIN_WIDGET_MASK)
-#define SH1_IS_BIG_WINDOW_ADDR(x) ((x) & BWIN_TOP)
-
-#define TIO_BWIN_WINDOW_SELECT_MASK 0x7
-#define TIO_BWIN_WINDOWNUM(x) (((x) >> TIO_BWIN_SIZE_BITS) & TIO_BWIN_WINDOW_SELECT_MASK)
-
-#define TIO_HWIN_SHIFT_BITS 33
-#define TIO_HWIN(x) (NODE_OFFSET(x) >> TIO_HWIN_SHIFT_BITS)
-
-/*
- * The following definitions pertain to the IO special address
- * space. They define the location of the big and little windows
- * of any given node.
- */
-
-#define SWIN_SIZE_BITS 24
-#define SWIN_WIDGET_MASK 0xF
-
-#define TIO_SWIN_SIZE_BITS 28
-#define TIO_SWIN_SIZE (1UL << TIO_SWIN_SIZE_BITS)
-#define TIO_SWIN_WIDGET_MASK 0x3
-
-/*
- * Convert smallwindow address to xtalk address.
- *
- * 'addr' can be physical or virtual address, but will be converted
- * to Xtalk address in the range 0 -> SWINZ_SIZEMASK
- */
-#define SWIN_WIDGETNUM(x) (((x) >> SWIN_SIZE_BITS) & SWIN_WIDGET_MASK)
-#define TIO_SWIN_WIDGETNUM(x) (((x) >> TIO_SWIN_SIZE_BITS) & TIO_SWIN_WIDGET_MASK)
-
-
-/*
- * The following macros produce the correct base virtual address for
- * the hub registers. The REMOTE_HUB_* macro produce
- * the address for the specified hub's registers. The intent is
- * that the appropriate PI, MD, NI, or II register would be substituted
- * for x.
- *
- * WARNING:
- * When certain Hub chip workaround are defined, it's not sufficient
- * to dereference the *_HUB_ADDR() macros. You should instead use
- * HUB_L() and HUB_S() if you must deal with pointers to hub registers.
- * Otherwise, the recommended approach is to use *_HUB_L() and *_HUB_S().
- * They're always safe.
- */
-/* Shub1 TIO & MMR addressing macros */
-#define SH1_TIO_IOSPACE_ADDR(n,x) \
- GLOBAL_MMR_ADDR(n,x)
-
-#define SH1_REMOTE_BWIN_MMR(n,x) \
- GLOBAL_MMR_ADDR(n,x)
-
-#define SH1_REMOTE_SWIN_MMR(n,x) \
- (NODE_SWIN_BASE(n,1) + 0x800000UL + (x))
-
-#define SH1_REMOTE_MMR(n,x) \
- (SH1_IS_BIG_WINDOW_ADDR(x) ? SH1_REMOTE_BWIN_MMR(n,x) : \
- SH1_REMOTE_SWIN_MMR(n,x))
-
-/* Shub1 TIO & MMR addressing macros */
-#define SH2_TIO_IOSPACE_ADDR(n,x) \
- ((__IA64_UNCACHED_OFFSET | REMOTE_ADDR(n,x) | 1UL << (NASID_SHIFT - 2)))
-
-#define SH2_REMOTE_MMR(n,x) \
- GLOBAL_MMR_ADDR(n,x)
-
-
-/* TIO & MMR addressing macros that work on both shub1 & shub2 */
-#define TIO_IOSPACE_ADDR(n,x) \
- ((u64 *)(is_shub1() ? SH1_TIO_IOSPACE_ADDR(n,x) : \
- SH2_TIO_IOSPACE_ADDR(n,x)))
-
-#define SH_REMOTE_MMR(n,x) \
- (is_shub1() ? SH1_REMOTE_MMR(n,x) : SH2_REMOTE_MMR(n,x))
-
-#define REMOTE_HUB_ADDR(n,x) \
- (IS_TIO_NASID(n) ? ((volatile u64*)TIO_IOSPACE_ADDR(n,x)) : \
- ((volatile u64*)SH_REMOTE_MMR(n,x)))
-
-
-#define HUB_L(x) (*((volatile typeof(*x) *)x))
-#define HUB_S(x,d) (*((volatile typeof(*x) *)x) = (d))
-
-#define REMOTE_HUB_L(n, a) HUB_L(REMOTE_HUB_ADDR((n), (a)))
-#define REMOTE_HUB_S(n, a, d) HUB_S(REMOTE_HUB_ADDR((n), (a)), (d))
-
-/*
- * Coretalk address breakdown
- */
-#define CTALK_NASID_SHFT 40
-#define CTALK_NASID_MASK (0x3FFFULL << CTALK_NASID_SHFT)
-#define CTALK_CID_SHFT 38
-#define CTALK_CID_MASK (0x3ULL << CTALK_CID_SHFT)
-#define CTALK_NODE_OFFSET 0x3FFFFFFFFF
-
-#endif /* _ASM_IA64_SN_ADDRS_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI specific setup.
- *
- * Copyright (C) 1995-1997,1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
- * Copyright (C) 1999 Ralf Baechle (ralf@gnu.org)
- */
-#ifndef _ASM_IA64_SN_ARCH_H
-#define _ASM_IA64_SN_ARCH_H
-
-#include <linux/numa.h>
-#include <asm/types.h>
-#include <asm/percpu.h>
-#include <asm/sn/types.h>
-#include <asm/sn/sn_cpuid.h>
-
-/*
- * This is the maximum number of NUMALINK nodes that can be part of a single
- * SSI kernel. This number includes C-brick, M-bricks, and TIOs. Nodes in
- * remote partitions are NOT included in this number.
- * The number of compact nodes cannot exceed size of a coherency domain.
- * The purpose of this define is to specify a node count that includes
- * all C/M/TIO nodes in an SSI system.
- *
- * SGI system can currently support up to 256 C/M nodes plus additional TIO nodes.
- *
- * Note: ACPI20 has an architectural limit of 256 nodes. When we upgrade
- * to ACPI3.0, this limit will be removed. The notion of "compact nodes"
- * should be deleted and TIOs should be included in MAX_NUMNODES.
- */
-#define MAX_TIO_NODES MAX_NUMNODES
-#define MAX_COMPACT_NODES (MAX_NUMNODES + MAX_TIO_NODES)
-
-/*
- * Maximum number of nodes in all partitions and in all coherency domains.
- * This is the total number of nodes accessible in the numalink fabric. It
- * includes all C & M bricks, plus all TIOs.
- *
- * This value is also the value of the maximum number of NASIDs in the numalink
- * fabric.
- */
-#define MAX_NUMALINK_NODES 16384
-
-/*
- * The following defines attributes of the HUB chip. These attributes are
- * frequently referenced. They are kept in the per-cpu data areas of each cpu.
- * They are kept together in a struct to minimize cache misses.
- */
-struct sn_hub_info_s {
- u8 shub2;
- u8 nasid_shift;
- u8 as_shift;
- u8 shub_1_1_found;
- u16 nasid_bitmask;
-};
-DECLARE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
-#define sn_hub_info this_cpu_ptr(&__sn_hub_info)
-#define is_shub2() (sn_hub_info->shub2)
-#define is_shub1() (sn_hub_info->shub2 == 0)
-
-/*
- * Use this macro to test if shub 1.1 wars should be enabled
- */
-#define enable_shub_wars_1_1() (sn_hub_info->shub_1_1_found)
-
-
-/*
- * Compact node ID to nasid mappings kept in the per-cpu data areas of each
- * cpu.
- */
-DECLARE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
-#define sn_cnodeid_to_nasid this_cpu_ptr(&__sn_cnodeid_to_nasid[0])
-
-
-extern u8 sn_partition_id;
-extern u8 sn_system_size;
-extern u8 sn_sharing_domain_size;
-extern u8 sn_region_size;
-
-extern void sn_flush_all_caches(long addr, long bytes);
-extern bool sn_cpu_disable_allowed(int cpu);
-
-#endif /* _ASM_IA64_SN_ARCH_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-
-#ifndef _ASM_IA64_SN_BTE_H
-#define _ASM_IA64_SN_BTE_H
-
-#include <linux/timer.h>
-#include <linux/spinlock.h>
-#include <linux/cache.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/types.h>
-#include <asm/sn/shub_mmr.h>
-
-struct nodepda_s;
-
-#define IBCT_NOTIFY (0x1UL << 4)
-#define IBCT_ZFIL_MODE (0x1UL << 0)
-
-/* #define BTE_DEBUG */
-/* #define BTE_DEBUG_VERBOSE */
-
-#ifdef BTE_DEBUG
-# define BTE_PRINTK(x) printk x /* Terse */
-# ifdef BTE_DEBUG_VERBOSE
-# define BTE_PRINTKV(x) printk x /* Verbose */
-# else
-# define BTE_PRINTKV(x)
-# endif /* BTE_DEBUG_VERBOSE */
-#else
-# define BTE_PRINTK(x)
-# define BTE_PRINTKV(x)
-#endif /* BTE_DEBUG */
-
-
-/* BTE status register only supports 16 bits for length field */
-#define BTE_LEN_BITS (16)
-#define BTE_LEN_MASK ((1 << BTE_LEN_BITS) - 1)
-#define BTE_MAX_XFER (BTE_LEN_MASK << L1_CACHE_SHIFT)
-
-
-/* Define hardware */
-#define BTES_PER_NODE (is_shub2() ? 4 : 2)
-#define MAX_BTES_PER_NODE 4
-
-#define BTE2OFF_CTRL 0
-#define BTE2OFF_SRC (SH2_BT_ENG_SRC_ADDR_0 - SH2_BT_ENG_CSR_0)
-#define BTE2OFF_DEST (SH2_BT_ENG_DEST_ADDR_0 - SH2_BT_ENG_CSR_0)
-#define BTE2OFF_NOTIFY (SH2_BT_ENG_NOTIF_ADDR_0 - SH2_BT_ENG_CSR_0)
-
-#define BTE_BASE_ADDR(interface) \
- (is_shub2() ? (interface == 0) ? SH2_BT_ENG_CSR_0 : \
- (interface == 1) ? SH2_BT_ENG_CSR_1 : \
- (interface == 2) ? SH2_BT_ENG_CSR_2 : \
- SH2_BT_ENG_CSR_3 \
- : (interface == 0) ? IIO_IBLS0 : IIO_IBLS1)
-
-#define BTE_SOURCE_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_SRC/8) \
- : base + (BTEOFF_SRC/8))
-
-#define BTE_DEST_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_DEST/8) \
- : base + (BTEOFF_DEST/8))
-
-#define BTE_CTRL_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_CTRL/8) \
- : base + (BTEOFF_CTRL/8))
-
-#define BTE_NOTIF_ADDR(base) \
- (is_shub2() ? base + (BTE2OFF_NOTIFY/8) \
- : base + (BTEOFF_NOTIFY/8))
-
-/* Define hardware modes */
-#define BTE_NOTIFY IBCT_NOTIFY
-#define BTE_NORMAL BTE_NOTIFY
-#define BTE_ZERO_FILL (BTE_NOTIFY | IBCT_ZFIL_MODE)
-/* Use a reserved bit to let the caller specify a wait for any BTE */
-#define BTE_WACQUIRE 0x4000
-/* Use the BTE on the node with the destination memory */
-#define BTE_USE_DEST (BTE_WACQUIRE << 1)
-/* Use any available BTE interface on any node for the transfer */
-#define BTE_USE_ANY (BTE_USE_DEST << 1)
-/* macro to force the IBCT0 value valid */
-#define BTE_VALID_MODE(x) ((x) & (IBCT_NOTIFY | IBCT_ZFIL_MODE))
-
-#define BTE_ACTIVE (IBLS_BUSY | IBLS_ERROR)
-#define BTE_WORD_AVAILABLE (IBLS_BUSY << 1)
-#define BTE_WORD_BUSY (~BTE_WORD_AVAILABLE)
-
-/*
- * Some macros to simplify reading.
- * Start with macros to locate the BTE control registers.
- */
-#define BTE_LNSTAT_LOAD(_bte) \
- HUB_L(_bte->bte_base_addr)
-#define BTE_LNSTAT_STORE(_bte, _x) \
- HUB_S(_bte->bte_base_addr, (_x))
-#define BTE_SRC_STORE(_bte, _x) \
-({ \
- u64 __addr = ((_x) & ~AS_MASK); \
- if (is_shub2()) \
- __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
- HUB_S(_bte->bte_source_addr, __addr); \
-})
-#define BTE_DEST_STORE(_bte, _x) \
-({ \
- u64 __addr = ((_x) & ~AS_MASK); \
- if (is_shub2()) \
- __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
- HUB_S(_bte->bte_destination_addr, __addr); \
-})
-#define BTE_CTRL_STORE(_bte, _x) \
- HUB_S(_bte->bte_control_addr, (_x))
-#define BTE_NOTIF_STORE(_bte, _x) \
-({ \
- u64 __addr = ia64_tpa((_x) & ~AS_MASK); \
- if (is_shub2()) \
- __addr = SH2_TIO_PHYS_TO_DMA(__addr); \
- HUB_S(_bte->bte_notify_addr, __addr); \
-})
-
-#define BTE_START_TRANSFER(_bte, _len, _mode) \
- is_shub2() ? BTE_CTRL_STORE(_bte, IBLS_BUSY | (_mode << 24) | _len) \
- : BTE_LNSTAT_STORE(_bte, _len); \
- BTE_CTRL_STORE(_bte, _mode)
-
-/* Possible results from bte_copy and bte_unaligned_copy */
-/* The following error codes map into the BTE hardware codes
- * IIO_ICRB_ECODE_* (in shubio.h). The hardware uses
- * an error code of 0 (IIO_ICRB_ECODE_DERR), but we want zero
- * to mean BTE_SUCCESS, so add one (BTEFAIL_OFFSET) to the error
- * codes to give the following error codes.
- */
-#define BTEFAIL_OFFSET 1
-
-typedef enum {
- BTE_SUCCESS, /* 0 is success */
- BTEFAIL_DIR, /* Directory error due to IIO access*/
- BTEFAIL_POISON, /* poison error on IO access (write to poison page) */
- BTEFAIL_WERR, /* Write error (ie WINV to a Read only line) */
- BTEFAIL_ACCESS, /* access error (protection violation) */
- BTEFAIL_PWERR, /* Partial Write Error */
- BTEFAIL_PRERR, /* Partial Read Error */
- BTEFAIL_TOUT, /* CRB Time out */
- BTEFAIL_XTERR, /* Incoming xtalk pkt had error bit */
- BTEFAIL_NOTAVAIL, /* BTE not available */
-} bte_result_t;
-
-#define BTEFAIL_SH2_RESP_SHORT 0x1 /* bit 000001 */
-#define BTEFAIL_SH2_RESP_LONG 0x2 /* bit 000010 */
-#define BTEFAIL_SH2_RESP_DSP 0x4 /* bit 000100 */
-#define BTEFAIL_SH2_RESP_ACCESS 0x8 /* bit 001000 */
-#define BTEFAIL_SH2_CRB_TO 0x10 /* bit 010000 */
-#define BTEFAIL_SH2_NACK_LIMIT 0x20 /* bit 100000 */
-#define BTEFAIL_SH2_ALL 0x3F /* bit 111111 */
-
-#define BTE_ERR_BITS 0x3FUL
-#define BTE_ERR_SHIFT 36
-#define BTE_ERR_MASK (BTE_ERR_BITS << BTE_ERR_SHIFT)
-
-#define BTE_ERROR_RETRY(value) \
- (is_shub2() ? (value != BTEFAIL_SH2_CRB_TO) \
- : (value != BTEFAIL_TOUT))
-
-/*
- * On shub1 BTE_ERR_MASK will always be false, so no need for is_shub2()
- */
-#define BTE_SHUB2_ERROR(_status) \
- ((_status & BTE_ERR_MASK) \
- ? (((_status >> BTE_ERR_SHIFT) & BTE_ERR_BITS) | IBLS_ERROR) \
- : _status)
-
-#define BTE_GET_ERROR_STATUS(_status) \
- (BTE_SHUB2_ERROR(_status) & ~IBLS_ERROR)
-
-#define BTE_VALID_SH2_ERROR(value) \
- ((value >= BTEFAIL_SH2_RESP_SHORT) && (value <= BTEFAIL_SH2_ALL))
-
-/*
- * Structure defining a bte. An instance of this
- * structure is created in the nodepda for each
- * bte on that node (as defined by BTES_PER_NODE)
- * This structure contains everything necessary
- * to work with a BTE.
- */
-struct bteinfo_s {
- volatile u64 notify ____cacheline_aligned;
- u64 *bte_base_addr ____cacheline_aligned;
- u64 *bte_source_addr;
- u64 *bte_destination_addr;
- u64 *bte_control_addr;
- u64 *bte_notify_addr;
- spinlock_t spinlock;
- cnodeid_t bte_cnode; /* cnode */
- int bte_error_count; /* Number of errors encountered */
- int bte_num; /* 0 --> BTE0, 1 --> BTE1 */
- int cleanup_active; /* Interface is locked for cleanup */
- volatile bte_result_t bh_error; /* error while processing */
- volatile u64 *most_rcnt_na;
- struct bteinfo_s *btes_to_try[MAX_BTES_PER_NODE];
-};
-
-
-/*
- * Function prototypes (functions defined in bte.c, used elsewhere)
- */
-extern bte_result_t bte_copy(u64, u64, u64, u64, void *);
-extern bte_result_t bte_unaligned_copy(u64, u64, u64, u64);
-extern void bte_error_handler(struct nodepda_s *);
-
-#define bte_zero(dest, len, mode, notification) \
- bte_copy(0, dest, len, ((mode) | BTE_ZERO_FILL), notification)
-
-/*
- * The following is the preferred way of calling bte_unaligned_copy
- * If the copy is fully cache line aligned, then bte_copy is
- * used instead. Since bte_copy is inlined, this saves a call
- * stack. NOTE: bte_copy is called synchronously and does block
- * until the transfer is complete. In order to get the asynch
- * version of bte_copy, you must perform this check yourself.
- */
-#define BTE_UNALIGNED_COPY(src, dest, len, mode) \
- (((len & (L1_CACHE_BYTES - 1)) || \
- (src & (L1_CACHE_BYTES - 1)) || \
- (dest & (L1_CACHE_BYTES - 1))) ? \
- bte_unaligned_copy(src, dest, len, mode) : \
- bte_copy(src, dest, len, mode, NULL))
-
-
-#endif /* _ASM_IA64_SN_BTE_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-/*
- * This file contains definitions for accessing a platform supported high resolution
- * clock. The clock is monitonically increasing and can be accessed from any node
- * in the system. The clock is synchronized across nodes - all nodes see the
- * same value.
- *
- * RTC_COUNTER_ADDR - contains the address of the counter
- *
- */
-
-#ifndef _ASM_IA64_SN_CLKSUPPORT_H
-#define _ASM_IA64_SN_CLKSUPPORT_H
-
-extern unsigned long sn_rtc_cycles_per_second;
-
-#define RTC_COUNTER_ADDR ((long *)LOCAL_MMR_ADDR(SH_RTC))
-
-#define rtc_time() (*RTC_COUNTER_ADDR)
-
-#endif /* _ASM_IA64_SN_CLKSUPPORT_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_GEO_H
-#define _ASM_IA64_SN_GEO_H
-
-/* The geoid_t implementation below is based loosely on the pcfg_t
- implementation in sys/SN/promcfg.h. */
-
-/* Type declaractions */
-
-/* Size of a geoid_t structure (must be before decl. of geoid_u) */
-#define GEOID_SIZE 8 /* Would 16 be better? The size can
- be different on different platforms. */
-
-#define MAX_SLOTS 0xf /* slots per module */
-#define MAX_SLABS 0xf /* slabs per slot */
-
-typedef unsigned char geo_type_t;
-
-/* Fields common to all substructures */
-typedef struct geo_common_s {
- moduleid_t module; /* The module (box) this h/w lives in */
- geo_type_t type; /* What type of h/w is named by this geoid_t */
- slabid_t slab:4; /* slab (ASIC), 0 .. 15 within slot */
- slotid_t slot:4; /* slot (Blade), 0 .. 15 within module */
-} geo_common_t;
-
-/* Additional fields for particular types of hardware */
-typedef struct geo_node_s {
- geo_common_t common; /* No additional fields needed */
-} geo_node_t;
-
-typedef struct geo_rtr_s {
- geo_common_t common; /* No additional fields needed */
-} geo_rtr_t;
-
-typedef struct geo_iocntl_s {
- geo_common_t common; /* No additional fields needed */
-} geo_iocntl_t;
-
-typedef struct geo_pcicard_s {
- geo_iocntl_t common;
- char bus; /* Bus/widget number */
- char slot; /* PCI slot number */
-} geo_pcicard_t;
-
-/* Subcomponents of a node */
-typedef struct geo_cpu_s {
- geo_node_t node;
- char slice; /* Which CPU on the node */
-} geo_cpu_t;
-
-typedef struct geo_mem_s {
- geo_node_t node;
- char membus; /* The memory bus on the node */
- char memslot; /* The memory slot on the bus */
-} geo_mem_t;
-
-
-typedef union geoid_u {
- geo_common_t common;
- geo_node_t node;
- geo_iocntl_t iocntl;
- geo_pcicard_t pcicard;
- geo_rtr_t rtr;
- geo_cpu_t cpu;
- geo_mem_t mem;
- char padsize[GEOID_SIZE];
-} geoid_t;
-
-
-/* Preprocessor macros */
-
-#define GEO_MAX_LEN 48 /* max. formatted length, plus some pad:
- module/001c07/slab/5/node/memory/2/slot/4 */
-
-/* Values for geo_type_t */
-#define GEO_TYPE_INVALID 0
-#define GEO_TYPE_MODULE 1
-#define GEO_TYPE_NODE 2
-#define GEO_TYPE_RTR 3
-#define GEO_TYPE_IOCNTL 4
-#define GEO_TYPE_IOCARD 5
-#define GEO_TYPE_CPU 6
-#define GEO_TYPE_MEM 7
-#define GEO_TYPE_MAX (GEO_TYPE_MEM+1)
-
-/* Parameter for hwcfg_format_geoid_compt() */
-#define GEO_COMPT_MODULE 1
-#define GEO_COMPT_SLAB 2
-#define GEO_COMPT_IOBUS 3
-#define GEO_COMPT_IOSLOT 4
-#define GEO_COMPT_CPU 5
-#define GEO_COMPT_MEMBUS 6
-#define GEO_COMPT_MEMSLOT 7
-
-#define GEO_INVALID_STR "<invalid>"
-
-#define INVALID_NASID ((nasid_t)-1)
-#define INVALID_CNODEID ((cnodeid_t)-1)
-#define INVALID_PNODEID ((pnodeid_t)-1)
-#define INVALID_SLAB (slabid_t)-1
-#define INVALID_SLOT (slotid_t)-1
-#define INVALID_MODULE ((moduleid_t)-1)
-
-static inline slabid_t geo_slab(geoid_t g)
-{
- return (g.common.type == GEO_TYPE_INVALID) ?
- INVALID_SLAB : g.common.slab;
-}
-
-static inline slotid_t geo_slot(geoid_t g)
-{
- return (g.common.type == GEO_TYPE_INVALID) ?
- INVALID_SLOT : g.common.slot;
-}
-
-static inline moduleid_t geo_module(geoid_t g)
-{
- return (g.common.type == GEO_TYPE_INVALID) ?
- INVALID_MODULE : g.common.module;
-}
-
-extern geoid_t cnodeid_get_geoid(cnodeid_t cnode);
-
-#endif /* _ASM_IA64_SN_GEO_H */
#ifndef _ASM_IA64_SN_INTR_H
#define _ASM_IA64_SN_INTR_H
-#include <linux/rcupdate.h>
-#include <asm/sn/types.h>
-
-#define SGI_UART_VECTOR 0xe9
-
-/* Reserved IRQs : Note, not to exceed IA64_SN2_FIRST_DEVICE_VECTOR */
#define SGI_XPC_ACTIVATE 0x30
-#define SGI_II_ERROR 0x31
-#define SGI_XBOW_ERROR 0x32
-#define SGI_PCIASIC_ERROR 0x33
-#define SGI_ACPI_SCI_INT 0x34
-#define SGI_TIOCA_ERROR 0x35
-#define SGI_TIO_ERROR 0x36
-#define SGI_TIOCX_ERROR 0x37
-#define SGI_MMTIMER_VECTOR 0x38
#define SGI_XPC_NOTIFY 0xe7
-#define IA64_SN2_FIRST_DEVICE_VECTOR 0x3c
-#define IA64_SN2_LAST_DEVICE_VECTOR 0xe6
-
-#define SN2_IRQ_RESERVED 0x1
-#define SN2_IRQ_CONNECTED 0x2
-#define SN2_IRQ_SHARED 0x4
-
-// The SN PROM irq struct
-struct sn_irq_info {
- struct sn_irq_info *irq_next; /* deprecated DO NOT USE */
- short irq_nasid; /* Nasid IRQ is assigned to */
- int irq_slice; /* slice IRQ is assigned to */
- int irq_cpuid; /* kernel logical cpuid */
- int irq_irq; /* the IRQ number */
- int irq_int_bit; /* Bridge interrupt pin */
- /* <0 means MSI */
- u64 irq_xtalkaddr; /* xtalkaddr IRQ is sent to */
- int irq_bridge_type;/* pciio asic type (pciio.h) */
- void *irq_bridge; /* bridge generating irq */
- void *irq_pciioinfo; /* associated pciio_info_t */
- int irq_last_intr; /* For Shub lb lost intr WAR */
- int irq_cookie; /* unique cookie */
- int irq_flags; /* flags */
- int irq_share_cnt; /* num devices sharing IRQ */
- struct list_head list; /* list of sn_irq_info structs */
- struct rcu_head rcu; /* rcu callback list */
-};
-
-extern void sn_send_IPI_phys(int, long, int, int);
-extern u64 sn_intr_alloc(nasid_t, int,
- struct sn_irq_info *,
- int, nasid_t, int);
-extern void sn_intr_free(nasid_t, int, struct sn_irq_info *);
-extern struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *, nasid_t, int);
-extern void sn_set_err_irq_affinity(unsigned int);
-extern struct list_head **sn_irq_lh;
-
-#define CPU_VECTOR_TO_IRQ(cpuid,vector) (vector)
-
#endif /* _ASM_IA64_SN_INTR_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_SN_IO_H
-#define _ASM_SN_IO_H
-#include <linux/compiler.h>
-#include <asm/intrinsics.h>
-
-extern void * sn_io_addr(unsigned long port) __attribute_const__; /* Forward definition */
-extern void __sn_mmiowb(void); /* Forward definition */
-
-extern int num_cnodes;
-
-#define __sn_mf_a() ia64_mfa()
-
-extern void sn_dma_flush(unsigned long);
-
-#define __sn_inb ___sn_inb
-#define __sn_inw ___sn_inw
-#define __sn_inl ___sn_inl
-#define __sn_outb ___sn_outb
-#define __sn_outw ___sn_outw
-#define __sn_outl ___sn_outl
-#define __sn_readb ___sn_readb
-#define __sn_readw ___sn_readw
-#define __sn_readl ___sn_readl
-#define __sn_readq ___sn_readq
-#define __sn_readb_relaxed ___sn_readb_relaxed
-#define __sn_readw_relaxed ___sn_readw_relaxed
-#define __sn_readl_relaxed ___sn_readl_relaxed
-#define __sn_readq_relaxed ___sn_readq_relaxed
-
-/*
- * Convenience macros for setting/clearing bits using the above accessors
- */
-
-#define __sn_setq_relaxed(addr, val) \
- writeq((__sn_readq_relaxed(addr) | (val)), (addr))
-#define __sn_clrq_relaxed(addr, val) \
- writeq((__sn_readq_relaxed(addr) & ~(val)), (addr))
-
-/*
- * The following routines are SN Platform specific, called when
- * a reference is made to inX/outX set macros. SN Platform
- * inX set of macros ensures that Posted DMA writes on the
- * Bridge is flushed.
- *
- * The routines should be self explainatory.
- */
-
-static inline unsigned int
-___sn_inb (unsigned long port)
-{
- volatile unsigned char *addr;
- unsigned char ret = -1;
-
- if ((addr = sn_io_addr(port))) {
- ret = *addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- }
- return ret;
-}
-
-static inline unsigned int
-___sn_inw (unsigned long port)
-{
- volatile unsigned short *addr;
- unsigned short ret = -1;
-
- if ((addr = sn_io_addr(port))) {
- ret = *addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- }
- return ret;
-}
-
-static inline unsigned int
-___sn_inl (unsigned long port)
-{
- volatile unsigned int *addr;
- unsigned int ret = -1;
-
- if ((addr = sn_io_addr(port))) {
- ret = *addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- }
- return ret;
-}
-
-static inline void
-___sn_outb (unsigned char val, unsigned long port)
-{
- volatile unsigned char *addr;
-
- if ((addr = sn_io_addr(port))) {
- *addr = val;
- __sn_mmiowb();
- }
-}
-
-static inline void
-___sn_outw (unsigned short val, unsigned long port)
-{
- volatile unsigned short *addr;
-
- if ((addr = sn_io_addr(port))) {
- *addr = val;
- __sn_mmiowb();
- }
-}
-
-static inline void
-___sn_outl (unsigned int val, unsigned long port)
-{
- volatile unsigned int *addr;
-
- if ((addr = sn_io_addr(port))) {
- *addr = val;
- __sn_mmiowb();
- }
-}
-
-/*
- * The following routines are SN Platform specific, called when
- * a reference is made to readX/writeX set macros. SN Platform
- * readX set of macros ensures that Posted DMA writes on the
- * Bridge is flushed.
- *
- * The routines should be self explainatory.
- */
-
-static inline unsigned char
-___sn_readb (const volatile void __iomem *addr)
-{
- unsigned char val;
-
- val = *(volatile unsigned char __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-static inline unsigned short
-___sn_readw (const volatile void __iomem *addr)
-{
- unsigned short val;
-
- val = *(volatile unsigned short __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-static inline unsigned int
-___sn_readl (const volatile void __iomem *addr)
-{
- unsigned int val;
-
- val = *(volatile unsigned int __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-static inline unsigned long
-___sn_readq (const volatile void __iomem *addr)
-{
- unsigned long val;
-
- val = *(volatile unsigned long __force *)addr;
- __sn_mf_a();
- sn_dma_flush((unsigned long)addr);
- return val;
-}
-
-/*
- * For generic and SN2 kernels, we have a set of fast access
- * PIO macros. These macros are provided on SN Platform
- * because the normal inX and readX macros perform an
- * additional task of flushing Post DMA request on the Bridge.
- *
- * These routines should be self explainatory.
- */
-
-static inline unsigned int
-sn_inb_fast (unsigned long port)
-{
- volatile unsigned char *addr = (unsigned char *)port;
- unsigned char ret;
-
- ret = *addr;
- __sn_mf_a();
- return ret;
-}
-
-static inline unsigned int
-sn_inw_fast (unsigned long port)
-{
- volatile unsigned short *addr = (unsigned short *)port;
- unsigned short ret;
-
- ret = *addr;
- __sn_mf_a();
- return ret;
-}
-
-static inline unsigned int
-sn_inl_fast (unsigned long port)
-{
- volatile unsigned int *addr = (unsigned int *)port;
- unsigned int ret;
-
- ret = *addr;
- __sn_mf_a();
- return ret;
-}
-
-static inline unsigned char
-___sn_readb_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned char __force *)addr;
-}
-
-static inline unsigned short
-___sn_readw_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned short __force *)addr;
-}
-
-static inline unsigned int
-___sn_readl_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned int __force *) addr;
-}
-
-static inline unsigned long
-___sn_readq_relaxed (const volatile void __iomem *addr)
-{
- return *(volatile unsigned long __force *) addr;
-}
-
-struct pci_dev;
-
-static inline int
-sn_pci_set_vchan(struct pci_dev *pci_dev, unsigned long *addr, int vchan)
-{
-
- if (vchan > 1) {
- return -1;
- }
-
- if (!(*addr >> 32)) /* Using a mask here would be cleaner */
- return 0; /* but this generates better code */
-
- if (vchan == 1) {
- /* Set Bit 57 */
- *addr |= (1UL << 57);
- } else {
- /* Clear Bit 57 */
- *addr &= ~(1UL << 57);
- }
-
- return 0;
-}
-
-#endif /* _ASM_SN_IO_H */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Copyright (C) 2005 Silicon Graphics, Inc.
- */
-#ifndef IA64_SN_IOC3_H
-#define IA64_SN_IOC3_H
-
-/* serial port register map */
-struct ioc3_serialregs {
- uint32_t sscr;
- uint32_t stpir;
- uint32_t stcir;
- uint32_t srpir;
- uint32_t srcir;
- uint32_t srtr;
- uint32_t shadow;
-};
-
-/* SUPERIO uart register map */
-struct ioc3_uartregs {
- char iu_lcr;
- union {
- char iir; /* read only */
- char fcr; /* write only */
- } u3;
- union {
- char ier; /* DLAB == 0 */
- char dlm; /* DLAB == 1 */
- } u2;
- union {
- char rbr; /* read only, DLAB == 0 */
- char thr; /* write only, DLAB == 0 */
- char dll; /* DLAB == 1 */
- } u1;
- char iu_scr;
- char iu_msr;
- char iu_lsr;
- char iu_mcr;
-};
-
-#define iu_rbr u1.rbr
-#define iu_thr u1.thr
-#define iu_dll u1.dll
-#define iu_ier u2.ier
-#define iu_dlm u2.dlm
-#define iu_iir u3.iir
-#define iu_fcr u3.fcr
-
-struct ioc3_sioregs {
- char fill[0x170];
- struct ioc3_uartregs uartb;
- struct ioc3_uartregs uarta;
-};
-
-/* PCI IO/mem space register map */
-struct ioc3 {
- uint32_t pci_id;
- uint32_t pci_scr;
- uint32_t pci_rev;
- uint32_t pci_lat;
- uint32_t pci_addr;
- uint32_t pci_err_addr_l;
- uint32_t pci_err_addr_h;
-
- uint32_t sio_ir;
- /* these registers are read-only for general kernel code. To
- * modify them use the functions in ioc3.c
- */
- uint32_t sio_ies;
- uint32_t sio_iec;
- uint32_t sio_cr;
- uint32_t int_out;
- uint32_t mcr;
- uint32_t gpcr_s;
- uint32_t gpcr_c;
- uint32_t gpdr;
- uint32_t gppr[9];
- char fill[0x4c];
-
- /* serial port registers */
- uint32_t sbbr_h;
- uint32_t sbbr_l;
-
- struct ioc3_serialregs port_a;
- struct ioc3_serialregs port_b;
- char fill1[0x1ff10];
- /* superio registers */
- struct ioc3_sioregs sregs;
-};
-
-/* These don't exist on the ioc3 serial card... */
-#define eier fill1[8]
-#define eisr fill1[4]
-
-#define PCI_LAT 0xc /* Latency Timer */
-#define PCI_SCR_DROP_MODE_EN 0x00008000 /* drop pios on parity err */
-#define UARTA_BASE 0x178
-#define UARTB_BASE 0x170
-
-
-/* bitmasks for serial RX status byte */
-#define RXSB_OVERRUN 0x01 /* char(s) lost */
-#define RXSB_PAR_ERR 0x02 /* parity error */
-#define RXSB_FRAME_ERR 0x04 /* framing error */
-#define RXSB_BREAK 0x08 /* break character */
-#define RXSB_CTS 0x10 /* state of CTS */
-#define RXSB_DCD 0x20 /* state of DCD */
-#define RXSB_MODEM_VALID 0x40 /* DCD, CTS and OVERRUN are valid */
-#define RXSB_DATA_VALID 0x80 /* FRAME_ERR PAR_ERR & BREAK valid */
-
-/* bitmasks for serial TX control byte */
-#define TXCB_INT_WHEN_DONE 0x20 /* interrupt after this byte is sent */
-#define TXCB_INVALID 0x00 /* byte is invalid */
-#define TXCB_VALID 0x40 /* byte is valid */
-#define TXCB_MCR 0x80 /* data<7:0> to modem cntrl register */
-#define TXCB_DELAY 0xc0 /* delay data<7:0> mSec */
-
-/* bitmasks for SBBR_L */
-#define SBBR_L_SIZE 0x00000001 /* 0 1KB rings, 1 4KB rings */
-
-/* bitmasks for SSCR_<A:B> */
-#define SSCR_RX_THRESHOLD 0x000001ff /* hiwater mark */
-#define SSCR_TX_TIMER_BUSY 0x00010000 /* TX timer in progress */
-#define SSCR_HFC_EN 0x00020000 /* h/w flow cntrl enabled */
-#define SSCR_RX_RING_DCD 0x00040000 /* postRX record on delta-DCD */
-#define SSCR_RX_RING_CTS 0x00080000 /* postRX record on delta-CTS */
-#define SSCR_HIGH_SPD 0x00100000 /* 4X speed */
-#define SSCR_DIAG 0x00200000 /* bypass clock divider */
-#define SSCR_RX_DRAIN 0x08000000 /* drain RX buffer to memory */
-#define SSCR_DMA_EN 0x10000000 /* enable ring buffer DMA */
-#define SSCR_DMA_PAUSE 0x20000000 /* pause DMA */
-#define SSCR_PAUSE_STATE 0x40000000 /* set when PAUSE takes effect*/
-#define SSCR_RESET 0x80000000 /* reset DMA channels */
-
-/* all producer/consumer pointers are the same bitfield */
-#define PROD_CONS_PTR_4K 0x00000ff8 /* for 4K buffers */
-#define PROD_CONS_PTR_1K 0x000003f8 /* for 1K buffers */
-#define PROD_CONS_PTR_OFF 3
-
-/* bitmasks for SRCIR_<A:B> */
-#define SRCIR_ARM 0x80000000 /* arm RX timer */
-
-/* bitmasks for SHADOW_<A:B> */
-#define SHADOW_DR 0x00000001 /* data ready */
-#define SHADOW_OE 0x00000002 /* overrun error */
-#define SHADOW_PE 0x00000004 /* parity error */
-#define SHADOW_FE 0x00000008 /* framing error */
-#define SHADOW_BI 0x00000010 /* break interrupt */
-#define SHADOW_THRE 0x00000020 /* transmit holding reg empty */
-#define SHADOW_TEMT 0x00000040 /* transmit shift reg empty */
-#define SHADOW_RFCE 0x00000080 /* char in RX fifo has error */
-#define SHADOW_DCTS 0x00010000 /* delta clear to send */
-#define SHADOW_DDCD 0x00080000 /* delta data carrier detect */
-#define SHADOW_CTS 0x00100000 /* clear to send */
-#define SHADOW_DCD 0x00800000 /* data carrier detect */
-#define SHADOW_DTR 0x01000000 /* data terminal ready */
-#define SHADOW_RTS 0x02000000 /* request to send */
-#define SHADOW_OUT1 0x04000000 /* 16550 OUT1 bit */
-#define SHADOW_OUT2 0x08000000 /* 16550 OUT2 bit */
-#define SHADOW_LOOP 0x10000000 /* loopback enabled */
-
-/* bitmasks for SRTR_<A:B> */
-#define SRTR_CNT 0x00000fff /* reload value for RX timer */
-#define SRTR_CNT_VAL 0x0fff0000 /* current value of RX timer */
-#define SRTR_CNT_VAL_SHIFT 16
-#define SRTR_HZ 16000 /* SRTR clock frequency */
-
-/* bitmasks for SIO_IR, SIO_IEC and SIO_IES */
-#define SIO_IR_SA_TX_MT 0x00000001 /* Serial port A TX empty */
-#define SIO_IR_SA_RX_FULL 0x00000002 /* port A RX buf full */
-#define SIO_IR_SA_RX_HIGH 0x00000004 /* port A RX hiwat */
-#define SIO_IR_SA_RX_TIMER 0x00000008 /* port A RX timeout */
-#define SIO_IR_SA_DELTA_DCD 0x00000010 /* port A delta DCD */
-#define SIO_IR_SA_DELTA_CTS 0x00000020 /* port A delta CTS */
-#define SIO_IR_SA_INT 0x00000040 /* port A pass-thru intr */
-#define SIO_IR_SA_TX_EXPLICIT 0x00000080 /* port A explicit TX thru */
-#define SIO_IR_SA_MEMERR 0x00000100 /* port A PCI error */
-#define SIO_IR_SB_TX_MT 0x00000200
-#define SIO_IR_SB_RX_FULL 0x00000400
-#define SIO_IR_SB_RX_HIGH 0x00000800
-#define SIO_IR_SB_RX_TIMER 0x00001000
-#define SIO_IR_SB_DELTA_DCD 0x00002000
-#define SIO_IR_SB_DELTA_CTS 0x00004000
-#define SIO_IR_SB_INT 0x00008000
-#define SIO_IR_SB_TX_EXPLICIT 0x00010000
-#define SIO_IR_SB_MEMERR 0x00020000
-#define SIO_IR_PP_INT 0x00040000 /* P port pass-thru intr */
-#define SIO_IR_PP_INTA 0x00080000 /* PP context A thru */
-#define SIO_IR_PP_INTB 0x00100000 /* PP context B thru */
-#define SIO_IR_PP_MEMERR 0x00200000 /* PP PCI error */
-#define SIO_IR_KBD_INT 0x00400000 /* kbd/mouse intr */
-#define SIO_IR_RT_INT 0x08000000 /* RT output pulse */
-#define SIO_IR_GEN_INT1 0x10000000 /* RT input pulse */
-#define SIO_IR_GEN_INT_SHIFT 28
-
-/* per device interrupt masks */
-#define SIO_IR_SA (SIO_IR_SA_TX_MT | \
- SIO_IR_SA_RX_FULL | \
- SIO_IR_SA_RX_HIGH | \
- SIO_IR_SA_RX_TIMER | \
- SIO_IR_SA_DELTA_DCD | \
- SIO_IR_SA_DELTA_CTS | \
- SIO_IR_SA_INT | \
- SIO_IR_SA_TX_EXPLICIT | \
- SIO_IR_SA_MEMERR)
-
-#define SIO_IR_SB (SIO_IR_SB_TX_MT | \
- SIO_IR_SB_RX_FULL | \
- SIO_IR_SB_RX_HIGH | \
- SIO_IR_SB_RX_TIMER | \
- SIO_IR_SB_DELTA_DCD | \
- SIO_IR_SB_DELTA_CTS | \
- SIO_IR_SB_INT | \
- SIO_IR_SB_TX_EXPLICIT | \
- SIO_IR_SB_MEMERR)
-
-#define SIO_IR_PP (SIO_IR_PP_INT | SIO_IR_PP_INTA | \
- SIO_IR_PP_INTB | SIO_IR_PP_MEMERR)
-#define SIO_IR_RT (SIO_IR_RT_INT | SIO_IR_GEN_INT1)
-
-/* bitmasks for SIO_CR */
-#define SIO_CR_CMD_PULSE_SHIFT 15
-#define SIO_CR_SER_A_BASE_SHIFT 1
-#define SIO_CR_SER_B_BASE_SHIFT 8
-#define SIO_CR_ARB_DIAG 0x00380000 /* cur !enet PCI requet (ro) */
-#define SIO_CR_ARB_DIAG_TXA 0x00000000
-#define SIO_CR_ARB_DIAG_RXA 0x00080000
-#define SIO_CR_ARB_DIAG_TXB 0x00100000
-#define SIO_CR_ARB_DIAG_RXB 0x00180000
-#define SIO_CR_ARB_DIAG_PP 0x00200000
-#define SIO_CR_ARB_DIAG_IDLE 0x00400000 /* 0 -> active request (ro) */
-
-/* defs for some of the generic I/O pins */
-#define GPCR_PHY_RESET 0x20 /* pin is output to PHY reset */
-#define GPCR_UARTB_MODESEL 0x40 /* pin is output to port B mode sel */
-#define GPCR_UARTA_MODESEL 0x80 /* pin is output to port A mode sel */
-
-#define GPPR_PHY_RESET_PIN 5 /* GIO pin controlling phy reset */
-#define GPPR_UARTB_MODESEL_PIN 6 /* GIO pin cntrling uartb modeselect */
-#define GPPR_UARTA_MODESEL_PIN 7 /* GIO pin cntrling uarta modeselect */
-
-#endif /* IA64_SN_IOC3_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Derived from IRIX <sys/SN/klconfig.h>.
- *
- * Copyright (C) 1992-1997,1999,2001-2004 Silicon Graphics, Inc. All Rights Reserved.
- * Copyright (C) 1999 by Ralf Baechle
- */
-#ifndef _ASM_IA64_SN_KLCONFIG_H
-#define _ASM_IA64_SN_KLCONFIG_H
-
-/*
- * The KLCONFIG structures store info about the various BOARDs found
- * during Hardware Discovery. In addition, it stores info about the
- * components found on the BOARDs.
- */
-
-typedef s32 klconf_off_t;
-
-
-/* Functions/macros needed to use this structure */
-
-typedef struct kl_config_hdr {
- char pad[20];
- klconf_off_t ch_board_info; /* the link list of boards */
- char pad0[88];
-} kl_config_hdr_t;
-
-
-#define NODE_OFFSET_TO_LBOARD(nasid,off) (lboard_t*)(GLOBAL_CAC_ADDR((nasid), (off)))
-
-/*
- * The KLCONFIG area is organized as a LINKED LIST of BOARDs. A BOARD
- * can be either 'LOCAL' or 'REMOTE'. LOCAL means it is attached to
- * the LOCAL/current NODE. REMOTE means it is attached to a different
- * node.(TBD - Need a way to treat ROUTER boards.)
- *
- * There are 2 different structures to represent these boards -
- * lboard - Local board, rboard - remote board. These 2 structures
- * can be arbitrarily mixed in the LINKED LIST of BOARDs. (Refer
- * Figure below). The first byte of the rboard or lboard structure
- * is used to find out its type - no unions are used.
- * If it is a lboard, then the config info of this board will be found
- * on the local node. (LOCAL NODE BASE + offset value gives pointer to
- * the structure.
- * If it is a rboard, the local structure contains the node number
- * and the offset of the beginning of the LINKED LIST on the remote node.
- * The details of the hardware on a remote node can be built locally,
- * if required, by reading the LINKED LIST on the remote node and
- * ignoring all the rboards on that node.
- *
- * The local node uses the REMOTE NODE NUMBER + OFFSET to point to the
- * First board info on the remote node. The remote node list is
- * traversed as the local list, using the REMOTE BASE ADDRESS and not
- * the local base address and ignoring all rboard values.
- *
- *
- KLCONFIG
-
- +------------+ +------------+ +------------+ +------------+
- | lboard | +-->| lboard | +-->| rboard | +-->| lboard |
- +------------+ | +------------+ | +------------+ | +------------+
- | board info | | | board info | | |errinfo,bptr| | | board info |
- +------------+ | +------------+ | +------------+ | +------------+
- | offset |--+ | offset |--+ | offset |--+ |offset=NULL |
- +------------+ +------------+ +------------+ +------------+
-
-
- +------------+
- | board info |
- +------------+ +--------------------------------+
- | compt 1 |------>| type, rev, diaginfo, size ... | (CPU)
- +------------+ +--------------------------------+
- | compt 2 |--+
- +------------+ | +--------------------------------+
- | ... | +--->| type, rev, diaginfo, size ... | (MEM_BANK)
- +------------+ +--------------------------------+
- | errinfo |--+
- +------------+ | +--------------------------------+
- +--->|r/l brd errinfo,compt err flags |
- +--------------------------------+
-
- *
- * Each BOARD consists of COMPONENTs and the BOARD structure has
- * pointers (offsets) to its COMPONENT structure.
- * The COMPONENT structure has version info, size and speed info, revision,
- * error info and the NIC info. This structure can accommodate any
- * BOARD with arbitrary COMPONENT composition.
- *
- * The ERRORINFO part of each BOARD has error information
- * that describes errors about the BOARD itself. It also has flags to
- * indicate the COMPONENT(s) on the board that have errors. The error
- * information specific to the COMPONENT is present in the respective
- * COMPONENT structure.
- *
- * The ERRORINFO structure is also treated like a COMPONENT, ie. the
- * BOARD has pointers(offset) to the ERRORINFO structure. The rboard
- * structure also has a pointer to the ERRORINFO structure. This is
- * the place to store ERRORINFO about a REMOTE NODE, if the HUB on
- * that NODE is not working or if the REMOTE MEMORY is BAD. In cases where
- * only the CPU of the REMOTE NODE is disabled, the ERRORINFO pointer can
- * be a NODE NUMBER, REMOTE OFFSET combination, pointing to error info
- * which is present on the REMOTE NODE.(TBD)
- * REMOTE ERRINFO can be stored on any of the nearest nodes
- * or on all the nearest nodes.(TBD)
- * Like BOARD structures, REMOTE ERRINFO structures can be built locally
- * using the rboard errinfo pointer.
- *
- * In order to get useful information from this Data organization, a set of
- * interface routines are provided (TBD). The important thing to remember while
- * manipulating the structures, is that, the NODE number information should
- * be used. If the NODE is non-zero (remote) then each offset should
- * be added to the REMOTE BASE ADDR else it should be added to the LOCAL BASE ADDR.
- * This includes offsets for BOARDS, COMPONENTS and ERRORINFO.
- *
- * Note that these structures do not provide much info about connectivity.
- * That info will be part of HWGRAPH, which is an extension of the cfg_t
- * data structure. (ref IP27prom/cfg.h) It has to be extended to include
- * the IO part of the Network(TBD).
- *
- * The data structures below define the above concepts.
- */
-
-
-/*
- * BOARD classes
- */
-
-#define KLCLASS_MASK 0xf0
-#define KLCLASS_NONE 0x00
-#define KLCLASS_NODE 0x10 /* CPU, Memory and HUB board */
-#define KLCLASS_CPU KLCLASS_NODE
-#define KLCLASS_IO 0x20 /* BaseIO, 4 ch SCSI, ethernet, FDDI
- and the non-graphics widget boards */
-#define KLCLASS_ROUTER 0x30 /* Router board */
-#define KLCLASS_MIDPLANE 0x40 /* We need to treat this as a board
- so that we can record error info */
-#define KLCLASS_IOBRICK 0x70 /* IP35 iobrick */
-#define KLCLASS_MAX 8 /* Bump this if a new CLASS is added */
-
-#define KLCLASS(_x) ((_x) & KLCLASS_MASK)
-
-
-/*
- * board types
- */
-
-#define KLTYPE_MASK 0x0f
-#define KLTYPE(_x) ((_x) & KLTYPE_MASK)
-
-#define KLTYPE_SNIA (KLCLASS_CPU | 0x1)
-#define KLTYPE_TIO (KLCLASS_CPU | 0x2)
-
-#define KLTYPE_ROUTER (KLCLASS_ROUTER | 0x1)
-#define KLTYPE_META_ROUTER (KLCLASS_ROUTER | 0x3)
-#define KLTYPE_REPEATER_ROUTER (KLCLASS_ROUTER | 0x4)
-
-#define KLTYPE_IOBRICK_XBOW (KLCLASS_MIDPLANE | 0x2)
-
-#define KLTYPE_IOBRICK (KLCLASS_IOBRICK | 0x0)
-#define KLTYPE_NBRICK (KLCLASS_IOBRICK | 0x4)
-#define KLTYPE_PXBRICK (KLCLASS_IOBRICK | 0x6)
-#define KLTYPE_IXBRICK (KLCLASS_IOBRICK | 0x7)
-#define KLTYPE_CGBRICK (KLCLASS_IOBRICK | 0x8)
-#define KLTYPE_OPUSBRICK (KLCLASS_IOBRICK | 0x9)
-#define KLTYPE_SABRICK (KLCLASS_IOBRICK | 0xa)
-#define KLTYPE_IABRICK (KLCLASS_IOBRICK | 0xb)
-#define KLTYPE_PABRICK (KLCLASS_IOBRICK | 0xc)
-#define KLTYPE_GABRICK (KLCLASS_IOBRICK | 0xd)
-
-
-/*
- * board structures
- */
-
-#define MAX_COMPTS_PER_BRD 24
-
-typedef struct lboard_s {
- klconf_off_t brd_next_any; /* Next BOARD */
- unsigned char struct_type; /* type of structure, local or remote */
- unsigned char brd_type; /* type+class */
- unsigned char brd_sversion; /* version of this structure */
- unsigned char brd_brevision; /* board revision */
- unsigned char brd_promver; /* board prom version, if any */
- unsigned char brd_flags; /* Enabled, Disabled etc */
- unsigned char brd_slot; /* slot number */
- unsigned short brd_debugsw; /* Debug switches */
- geoid_t brd_geoid; /* geo id */
- partid_t brd_partition; /* Partition number */
- unsigned short brd_diagval; /* diagnostic value */
- unsigned short brd_diagparm; /* diagnostic parameter */
- unsigned char brd_inventory; /* inventory history */
- unsigned char brd_numcompts; /* Number of components */
- nic_t brd_nic; /* Number in CAN */
- nasid_t brd_nasid; /* passed parameter */
- klconf_off_t brd_compts[MAX_COMPTS_PER_BRD]; /* pointers to COMPONENTS */
- klconf_off_t brd_errinfo; /* Board's error information */
- struct lboard_s *brd_parent; /* Logical parent for this brd */
- char pad0[4];
- unsigned char brd_confidence; /* confidence that the board is bad */
- nasid_t brd_owner; /* who owns this board */
- unsigned char brd_nic_flags; /* To handle 8 more NICs */
- char pad1[24]; /* future expansion */
- char brd_name[32];
- nasid_t brd_next_same_host; /* host of next brd w/same nasid */
- klconf_off_t brd_next_same; /* Next BOARD with same nasid */
-} lboard_t;
-
-/*
- * Generic info structure. This stores common info about a
- * component.
- */
-
-typedef struct klinfo_s { /* Generic info */
- unsigned char struct_type; /* type of this structure */
- unsigned char struct_version; /* version of this structure */
- unsigned char flags; /* Enabled, disabled etc */
- unsigned char revision; /* component revision */
- unsigned short diagval; /* result of diagnostics */
- unsigned short diagparm; /* diagnostic parameter */
- unsigned char inventory; /* previous inventory status */
- unsigned short partid; /* widget part number */
- nic_t nic; /* MUst be aligned properly */
- unsigned char physid; /* physical id of component */
- unsigned int virtid; /* virtual id as seen by system */
- unsigned char widid; /* Widget id - if applicable */
- nasid_t nasid; /* node number - from parent */
- char pad1; /* pad out structure. */
- char pad2; /* pad out structure. */
- void *data;
- klconf_off_t errinfo; /* component specific errors */
- unsigned short pad3; /* pci fields have moved over to */
- unsigned short pad4; /* klbri_t */
-} klinfo_t ;
-
-
-static inline lboard_t *find_lboard_next(lboard_t * brd)
-{
- if (brd && brd->brd_next_any)
- return NODE_OFFSET_TO_LBOARD(NASID_GET(brd), brd->brd_next_any);
- return NULL;
-}
-
-#endif /* _ASM_IA64_SN_KLCONFIG_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2004 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#ifndef _ASM_IA64_SN_L1_H
-#define _ASM_IA64_SN_L1_H
-
-/* brick type response codes */
-#define L1_BRICKTYPE_PX 0x23 /* # */
-#define L1_BRICKTYPE_PE 0x25 /* % */
-#define L1_BRICKTYPE_N_p0 0x26 /* & */
-#define L1_BRICKTYPE_IP45 0x34 /* 4 */
-#define L1_BRICKTYPE_IP41 0x35 /* 5 */
-#define L1_BRICKTYPE_TWISTER 0x36 /* 6 */ /* IP53 & ROUTER */
-#define L1_BRICKTYPE_IX 0x3d /* = */
-#define L1_BRICKTYPE_IP34 0x61 /* a */
-#define L1_BRICKTYPE_GA 0x62 /* b */
-#define L1_BRICKTYPE_C 0x63 /* c */
-#define L1_BRICKTYPE_OPUS_TIO 0x66 /* f */
-#define L1_BRICKTYPE_I 0x69 /* i */
-#define L1_BRICKTYPE_N 0x6e /* n */
-#define L1_BRICKTYPE_OPUS 0x6f /* o */
-#define L1_BRICKTYPE_P 0x70 /* p */
-#define L1_BRICKTYPE_R 0x72 /* r */
-#define L1_BRICKTYPE_CHI_CG 0x76 /* v */
-#define L1_BRICKTYPE_X 0x78 /* x */
-#define L1_BRICKTYPE_X2 0x79 /* y */
-#define L1_BRICKTYPE_SA 0x5e /* ^ */
-#define L1_BRICKTYPE_PA 0x6a /* j */
-#define L1_BRICKTYPE_IA 0x6b /* k */
-#define L1_BRICKTYPE_ATHENA 0x2b /* + */
-#define L1_BRICKTYPE_DAYTONA 0x7a /* z */
-#define L1_BRICKTYPE_1932 0x2c /* . */
-#define L1_BRICKTYPE_191010 0x2e /* , */
-
-/* board type response codes */
-#define L1_BOARDTYPE_IP69 0x0100 /* CA */
-#define L1_BOARDTYPE_IP63 0x0200 /* CB */
-#define L1_BOARDTYPE_BASEIO 0x0300 /* IB */
-#define L1_BOARDTYPE_PCIE2SLOT 0x0400 /* IC */
-#define L1_BOARDTYPE_PCIX3SLOT 0x0500 /* ID */
-#define L1_BOARDTYPE_PCIXPCIE4SLOT 0x0600 /* IE */
-#define L1_BOARDTYPE_ABACUS 0x0700 /* AB */
-#define L1_BOARDTYPE_DAYTONA 0x0800 /* AD */
-#define L1_BOARDTYPE_INVAL (-1) /* invalid brick type */
-
-#endif /* _ASM_IA64_SN_L1_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- * Copyright (C) 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_LEDS_H
-#define _ASM_IA64_SN_LEDS_H
-
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/shub_mmr.h>
-
-#define LED0 (LOCAL_MMR_ADDR(SH_REAL_JUNK_BUS_LED0))
-#define LED_CPU_SHIFT 16
-
-#define LED_CPU_HEARTBEAT 0x01
-#define LED_CPU_ACTIVITY 0x02
-#define LED_ALWAYS_SET 0x00
-
-/*
- * Basic macros for flashing the LEDS on an SGI SN.
- */
-
-static __inline__ void
-set_led_bits(u8 value, u8 mask)
-{
- pda->led_state = (pda->led_state & ~mask) | (value & mask);
- *pda->led_address = (short) pda->led_state;
-}
-
-#endif /* _ASM_IA64_SN_LEDS_H */
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_MODULE_H
-#define _ASM_IA64_SN_MODULE_H
-
-/* parameter for format_module_id() */
-#define MODULE_FORMAT_BRIEF 1
-#define MODULE_FORMAT_LONG 2
-#define MODULE_FORMAT_LCD 3
-
-/*
- * Module id format
- *
- * 31-16 Rack ID (encoded class, group, number - 16-bit unsigned int)
- * 15-8 Brick type (8-bit ascii character)
- * 7-0 Bay (brick position in rack (0-63) - 8-bit unsigned int)
- *
- */
-
-/*
- * Macros for getting the brick type
- */
-#define MODULE_BTYPE_MASK 0xff00
-#define MODULE_BTYPE_SHFT 8
-#define MODULE_GET_BTYPE(_m) (((_m) & MODULE_BTYPE_MASK) >> MODULE_BTYPE_SHFT)
-#define MODULE_BT_TO_CHAR(_b) ((char)(_b))
-#define MODULE_GET_BTCHAR(_m) (MODULE_BT_TO_CHAR(MODULE_GET_BTYPE(_m)))
-
-/*
- * Macros for getting the rack ID.
- */
-#define MODULE_RACK_MASK 0xffff0000
-#define MODULE_RACK_SHFT 16
-#define MODULE_GET_RACK(_m) (((_m) & MODULE_RACK_MASK) >> MODULE_RACK_SHFT)
-
-/*
- * Macros for getting the brick position
- */
-#define MODULE_BPOS_MASK 0x00ff
-#define MODULE_BPOS_SHFT 0
-#define MODULE_GET_BPOS(_m) (((_m) & MODULE_BPOS_MASK) >> MODULE_BPOS_SHFT)
-
-/*
- * Macros for encoding and decoding rack IDs
- * A rack number consists of three parts:
- * class (0==CPU/mixed, 1==I/O), group, number
- *
- * Rack number is stored just as it is displayed on the screen:
- * a 3-decimal-digit number.
- */
-#define RACK_CLASS_DVDR 100
-#define RACK_GROUP_DVDR 10
-#define RACK_NUM_DVDR 1
-
-#define RACK_CREATE_RACKID(_c, _g, _n) ((_c) * RACK_CLASS_DVDR + \
- (_g) * RACK_GROUP_DVDR + (_n) * RACK_NUM_DVDR)
-
-#define RACK_GET_CLASS(_r) ((_r) / RACK_CLASS_DVDR)
-#define RACK_GET_GROUP(_r) (((_r) - RACK_GET_CLASS(_r) * \
- RACK_CLASS_DVDR) / RACK_GROUP_DVDR)
-#define RACK_GET_NUM(_r) (((_r) - RACK_GET_CLASS(_r) * \
- RACK_CLASS_DVDR - RACK_GET_GROUP(_r) * \
- RACK_GROUP_DVDR) / RACK_NUM_DVDR)
-
-/*
- * Macros for encoding and decoding rack IDs
- * A rack number consists of three parts:
- * class 1 bit, 0==CPU/mixed, 1==I/O
- * group 2 bits for CPU/mixed, 3 bits for I/O
- * number 3 bits for CPU/mixed, 2 bits for I/O (1 based)
- */
-#define RACK_GROUP_BITS(_r) (RACK_GET_CLASS(_r) ? 3 : 2)
-#define RACK_NUM_BITS(_r) (RACK_GET_CLASS(_r) ? 2 : 3)
-
-#define RACK_CLASS_MASK(_r) 0x20
-#define RACK_CLASS_SHFT(_r) 5
-#define RACK_ADD_CLASS(_r, _c) \
- ((_r) |= (_c) << RACK_CLASS_SHFT(_r) & RACK_CLASS_MASK(_r))
-
-#define RACK_GROUP_SHFT(_r) RACK_NUM_BITS(_r)
-#define RACK_GROUP_MASK(_r) \
- ( (((unsigned)1<<RACK_GROUP_BITS(_r)) - 1) << RACK_GROUP_SHFT(_r) )
-#define RACK_ADD_GROUP(_r, _g) \
- ((_r) |= (_g) << RACK_GROUP_SHFT(_r) & RACK_GROUP_MASK(_r))
-
-#define RACK_NUM_SHFT(_r) 0
-#define RACK_NUM_MASK(_r) \
- ( (((unsigned)1<<RACK_NUM_BITS(_r)) - 1) << RACK_NUM_SHFT(_r) )
-#define RACK_ADD_NUM(_r, _n) \
- ((_r) |= ((_n) - 1) << RACK_NUM_SHFT(_r) & RACK_NUM_MASK(_r))
-
-
-/*
- * Brick type definitions
- */
-#define MAX_BRICK_TYPES 256 /* brick type is stored as uchar */
-
-extern char brick_types[];
-
-#define MODULE_CBRICK 0
-#define MODULE_RBRICK 1
-#define MODULE_IBRICK 2
-#define MODULE_KBRICK 3
-#define MODULE_XBRICK 4
-#define MODULE_DBRICK 5
-#define MODULE_PBRICK 6
-#define MODULE_NBRICK 7
-#define MODULE_PEBRICK 8
-#define MODULE_PXBRICK 9
-#define MODULE_IXBRICK 10
-#define MODULE_CGBRICK 11
-#define MODULE_OPUSBRICK 12
-#define MODULE_SABRICK 13 /* TIO BringUp Brick */
-#define MODULE_IABRICK 14
-#define MODULE_PABRICK 15
-#define MODULE_GABRICK 16
-#define MODULE_OPUS_TIO 17 /* OPUS TIO Riser */
-
-extern char brick_types[];
-extern void format_module_id(char *, moduleid_t, int);
-
-#endif /* _ASM_IA64_SN_MODULE_H */
+++ /dev/null
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2008 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_MSPEC_H
-#define _ASM_IA64_SN_MSPEC_H
-
-#define FETCHOP_VAR_SIZE 64 /* 64 byte per fetchop variable */
-
-#define FETCHOP_LOAD 0
-#define FETCHOP_INCREMENT 8
-#define FETCHOP_DECREMENT 16
-#define FETCHOP_CLEAR 24
-
-#define FETCHOP_STORE 0
-#define FETCHOP_AND 24
-#define FETCHOP_OR 32
-
-#define FETCHOP_CLEAR_CACHE 56
-
-#define FETCHOP_LOAD_OP(addr, op) ( \
- *(volatile long *)((char*) (addr) + (op)))
-
-#define FETCHOP_STORE_OP(addr, op, x) ( \
- *(volatile long *)((char*) (addr) + (op)) = (long) (x))
-
-#ifdef __KERNEL__
-
-/*
- * Each Atomic Memory Operation (amo, formerly known as fetchop)
- * variable is 64 bytes long. The first 8 bytes are used. The
- * remaining 56 bytes are unaddressable due to the operation taking
- * that portion of the address.
- *
- * NOTE: The amo structure _MUST_ be placed in either the first or second
- * half of the cache line. The cache line _MUST NOT_ be used for anything
- * other than additional amo entries. This is because there are two
- * addresses which reference the same physical cache line. One will
- * be a cached entry with the memory type bits all set. This address
- * may be loaded into processor cache. The amo will be referenced
- * uncached via the memory special memory type. If any portion of the
- * cached cache-line is modified, when that line is flushed, it will
- * overwrite the uncached value in physical memory and lead to
- * inconsistency.
- */
-struct amo {
- u64 variable;
- u64 unused[7];
-};
-
-
-#endif /* __KERNEL__ */
-
-#endif /* _ASM_IA64_SN_MSPEC_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_NODEPDA_H
-#define _ASM_IA64_SN_NODEPDA_H
-
-
-#include <asm/irq.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/bte.h>
-
-/*
- * NUMA Node-Specific Data structures are defined in this file.
- * In particular, this is the location of the node PDA.
- * A pointer to the right node PDA is saved in each CPU PDA.
- */
-
-/*
- * Node-specific data structure.
- *
- * One of these structures is allocated on each node of a NUMA system.
- *
- * This structure provides a convenient way of keeping together
- * all per-node data structures.
- */
-struct phys_cpuid {
- short nasid;
- char subnode;
- char slice;
-};
-
-struct nodepda_s {
- void *pdinfo; /* Platform-dependent per-node info */
-
- /*
- * The BTEs on this node are shared by the local cpus
- */
- struct bteinfo_s bte_if[MAX_BTES_PER_NODE]; /* Virtual Interface */
- struct timer_list bte_recovery_timer;
- spinlock_t bte_recovery_lock;
-
- /*
- * Array of pointers to the nodepdas for each node.
- */
- struct nodepda_s *pernode_pdaindr[MAX_COMPACT_NODES];
-
- /*
- * Array of physical cpu identifiers. Indexed by cpuid.
- */
- struct phys_cpuid phys_cpuid[NR_CPUS];
- spinlock_t ptc_lock ____cacheline_aligned_in_smp;
-};
-
-typedef struct nodepda_s nodepda_t;
-
-/*
- * Access Functions for node PDA.
- * Since there is one nodepda for each node, we need a convenient mechanism
- * to access these nodepdas without cluttering code with #ifdefs.
- * The next set of definitions provides this.
- * Routines are expected to use
- *
- * sn_nodepda - to access node PDA for the node on which code is running
- * NODEPDA(cnodeid) - to access node PDA for cnodeid
- */
-
-DECLARE_PER_CPU(struct nodepda_s *, __sn_nodepda);
-#define sn_nodepda __this_cpu_read(__sn_nodepda)
-#define NODEPDA(cnodeid) (sn_nodepda->pernode_pdaindr[cnodeid])
-
-/*
- * Check if given a compact node id the corresponding node has all the
- * cpus disabled.
- */
-#define is_headless_node(cnodeid) (nr_cpus_node(cnodeid) == 0)
-
-#endif /* _ASM_IA64_SN_NODEPDA_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
-#define _ASM_IA64_SN_PCI_PCIBR_PROVIDER_H
-
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibus_provider_defs.h>
-
-/* Workarounds */
-#define PV907516 (1 << 1) /* TIOCP: Don't write the write buffer flush reg */
-
-#define BUSTYPE_MASK 0x1
-
-/* Macros given a pcibus structure */
-#define IS_PCIX(ps) ((ps)->pbi_bridge_mode & BUSTYPE_MASK)
-#define IS_PCI_BRIDGE_ASIC(asic) (asic == PCIIO_ASIC_TYPE_PIC || \
- asic == PCIIO_ASIC_TYPE_TIOCP)
-#define IS_PIC_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_PIC)
-#define IS_TIOCP_SOFT(ps) (ps->pbi_bridge_type == PCIBR_BRIDGETYPE_TIOCP)
-
-
-/*
- * The different PCI Bridge types supported on the SGI Altix platforms
- */
-#define PCIBR_BRIDGETYPE_UNKNOWN -1
-#define PCIBR_BRIDGETYPE_PIC 2
-#define PCIBR_BRIDGETYPE_TIOCP 3
-
-/*
- * Bridge 64bit Direct Map Attributes
- */
-#define PCI64_ATTR_PREF (1ull << 59)
-#define PCI64_ATTR_PREC (1ull << 58)
-#define PCI64_ATTR_VIRTUAL (1ull << 57)
-#define PCI64_ATTR_BAR (1ull << 56)
-#define PCI64_ATTR_SWAP (1ull << 55)
-#define PCI64_ATTR_VIRTUAL1 (1ull << 54)
-
-#define PCI32_LOCAL_BASE 0
-#define PCI32_MAPPED_BASE 0x40000000
-#define PCI32_DIRECT_BASE 0x80000000
-
-#define IS_PCI32_MAPPED(x) ((u64)(x) < PCI32_DIRECT_BASE && \
- (u64)(x) >= PCI32_MAPPED_BASE)
-#define IS_PCI32_DIRECT(x) ((u64)(x) >= PCI32_MAPPED_BASE)
-
-
-/*
- * Bridge PMU Address Transaltion Entry Attibutes
- */
-#define PCI32_ATE_V (0x1 << 0)
-#define PCI32_ATE_CO (0x1 << 1) /* PIC ASIC ONLY */
-#define PCI32_ATE_PIO (0x1 << 1) /* TIOCP ASIC ONLY */
-#define PCI32_ATE_MSI (0x1 << 2)
-#define PCI32_ATE_PREF (0x1 << 3)
-#define PCI32_ATE_BAR (0x1 << 4)
-#define PCI32_ATE_ADDR_SHFT 12
-
-#define MINIMAL_ATES_REQUIRED(addr, size) \
- (IOPG(IOPGOFF(addr) + (size) - 1) == IOPG((size) - 1))
-
-#define MINIMAL_ATE_FLAG(addr, size) \
- (MINIMAL_ATES_REQUIRED((u64)addr, size) ? 1 : 0)
-
-/* bit 29 of the pci address is the SWAP bit */
-#define ATE_SWAPSHIFT 29
-#define ATE_SWAP_ON(x) ((x) |= (1 << ATE_SWAPSHIFT))
-#define ATE_SWAP_OFF(x) ((x) &= ~(1 << ATE_SWAPSHIFT))
-
-/*
- * I/O page size
- */
-#if PAGE_SIZE < 16384
-#define IOPFNSHIFT 12 /* 4K per mapped page */
-#else
-#define IOPFNSHIFT 14 /* 16K per mapped page */
-#endif
-
-#define IOPGSIZE (1 << IOPFNSHIFT)
-#define IOPG(x) ((x) >> IOPFNSHIFT)
-#define IOPGOFF(x) ((x) & (IOPGSIZE-1))
-
-#define PCIBR_DEV_SWAP_DIR (1ull << 19)
-#define PCIBR_CTRL_PAGE_SIZE (0x1 << 21)
-
-/*
- * PMU resources.
- */
-struct ate_resource{
- u64 *ate;
- u64 num_ate;
- u64 lowest_free_index;
-};
-
-struct pcibus_info {
- struct pcibus_bussoft pbi_buscommon; /* common header */
- u32 pbi_moduleid;
- short pbi_bridge_type;
- short pbi_bridge_mode;
-
- struct ate_resource pbi_int_ate_resource;
- u64 pbi_int_ate_size;
-
- u64 pbi_dir_xbase;
- char pbi_hub_xid;
-
- u64 pbi_devreg[8];
-
- u32 pbi_valid_devices;
- u32 pbi_enabled_devices;
-
- spinlock_t pbi_lock;
-};
-
-extern int pcibr_init_provider(void);
-extern void *pcibr_bus_fixup(struct pcibus_bussoft *, struct pci_controller *);
-extern dma_addr_t pcibr_dma_map(struct pci_dev *, unsigned long, size_t, int type);
-extern dma_addr_t pcibr_dma_map_consistent(struct pci_dev *, unsigned long, size_t, int type);
-extern void pcibr_dma_unmap(struct pci_dev *, dma_addr_t, int);
-
-/*
- * prototypes for the bridge asic register access routines in pcibr_reg.c
- */
-extern void pcireg_control_bit_clr(struct pcibus_info *, u64);
-extern void pcireg_control_bit_set(struct pcibus_info *, u64);
-extern u64 pcireg_tflush_get(struct pcibus_info *);
-extern u64 pcireg_intr_status_get(struct pcibus_info *);
-extern void pcireg_intr_enable_bit_clr(struct pcibus_info *, u64);
-extern void pcireg_intr_enable_bit_set(struct pcibus_info *, u64);
-extern void pcireg_intr_addr_addr_set(struct pcibus_info *, int, u64);
-extern void pcireg_force_intr_set(struct pcibus_info *, int);
-extern u64 pcireg_wrb_flush_get(struct pcibus_info *, int);
-extern void pcireg_int_ate_set(struct pcibus_info *, int, u64);
-extern u64 __iomem * pcireg_int_ate_addr(struct pcibus_info *, int);
-extern void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info);
-extern void pcibr_change_devices_irq(struct sn_irq_info *sn_irq_info);
-extern int pcibr_ate_alloc(struct pcibus_info *, int);
-extern void pcibr_ate_free(struct pcibus_info *, int);
-extern void ate_write(struct pcibus_info *, int, int, u64);
-extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
- void *resp, char **ssdt);
-extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
- int action, void *resp);
-extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
-#endif
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
-#define _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H
-
-/*
- * SN pci asic types. Do not ever renumber these or reuse values. The
- * values must agree with what prom thinks they are.
- */
-
-#define PCIIO_ASIC_TYPE_UNKNOWN 0
-#define PCIIO_ASIC_TYPE_PPB 1
-#define PCIIO_ASIC_TYPE_PIC 2
-#define PCIIO_ASIC_TYPE_TIOCP 3
-#define PCIIO_ASIC_TYPE_TIOCA 4
-#define PCIIO_ASIC_TYPE_TIOCE 5
-
-#define PCIIO_ASIC_MAX_TYPES 6
-
-/*
- * Common pciio bus provider data. There should be one of these as the
- * first field in any pciio based provider soft structure (e.g. pcibr_soft
- * tioca_soft, etc).
- */
-
-struct pcibus_bussoft {
- u32 bs_asic_type; /* chipset type */
- u32 bs_xid; /* xwidget id */
- u32 bs_persist_busnum; /* Persistent Bus Number */
- u32 bs_persist_segment; /* Segment Number */
- u64 bs_legacy_io; /* legacy io pio addr */
- u64 bs_legacy_mem; /* legacy mem pio addr */
- u64 bs_base; /* widget base */
- struct xwidget_info *bs_xwidget_info;
-};
-
-struct pci_controller;
-/*
- * SN pci bus indirection
- */
-
-struct sn_pcibus_provider {
- dma_addr_t (*dma_map)(struct pci_dev *, unsigned long, size_t, int flags);
- dma_addr_t (*dma_map_consistent)(struct pci_dev *, unsigned long, size_t, int flags);
- void (*dma_unmap)(struct pci_dev *, dma_addr_t, int);
- void * (*bus_fixup)(struct pcibus_bussoft *, struct pci_controller *);
- void (*force_interrupt)(struct sn_irq_info *);
- void (*target_interrupt)(struct sn_irq_info *);
-};
-
-/*
- * Flags used by the map interfaces
- * bits 3:0 specifies format of passed in address
- * bit 4 specifies that address is to be used for MSI
- */
-
-#define SN_DMA_ADDRTYPE(x) ((x) & 0xf)
-#define SN_DMA_ADDR_PHYS 1 /* address is an xio address. */
-#define SN_DMA_ADDR_XIO 2 /* address is phys memory */
-#define SN_DMA_MSI 0x10 /* Bus address is to be used for MSI */
-
-extern struct sn_pcibus_provider *sn_pci_provider[];
-#endif /* _ASM_IA64_SN_PCI_PCIBUS_PROVIDER_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PCIDEV_H
-#define _ASM_IA64_SN_PCI_PCIDEV_H
-
-#include <linux/pci.h>
-
-/*
- * In ia64, pci_dev->sysdata must be a *pci_controller. To provide access to
- * the pcidev_info structs for all devices under a controller, we keep a
- * list of pcidev_info under pci_controller->platform_data.
- */
-struct sn_platform_data {
- void *provider_soft;
- struct list_head pcidev_info;
-};
-
-#define SN_PLATFORM_DATA(busdev) \
- ((struct sn_platform_data *)(PCI_CONTROLLER(busdev)->platform_data))
-
-#define SN_PCIDEV_INFO(dev) sn_pcidev_info_get(dev)
-
-/*
- * Given a pci_bus, return the sn pcibus_bussoft struct. Note that
- * this only works for root busses, not for busses represented by PPB's.
- */
-
-#define SN_PCIBUS_BUSSOFT(pci_bus) \
- ((struct pcibus_bussoft *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
-
-#define SN_PCIBUS_BUSSOFT_INFO(pci_bus) \
- ((struct pcibus_info *)(SN_PLATFORM_DATA(pci_bus)->provider_soft))
-/*
- * Given a struct pci_dev, return the sn pcibus_bussoft struct. Note
- * that this is not equivalent to SN_PCIBUS_BUSSOFT(pci_dev->bus) due
- * due to possible PPB's in the path.
- */
-
-#define SN_PCIDEV_BUSSOFT(pci_dev) \
- (SN_PCIDEV_INFO(pci_dev)->pdi_host_pcidev_info->pdi_pcibus_info)
-
-#define SN_PCIDEV_BUSPROVIDER(pci_dev) \
- (SN_PCIDEV_INFO(pci_dev)->pdi_provider)
-
-#define PCIIO_BUS_NONE 255 /* bus 255 reserved */
-#define PCIIO_SLOT_NONE 255
-#define PCIIO_FUNC_NONE 255
-#define PCIIO_VENDOR_ID_NONE (-1)
-
-struct pcidev_info {
- u64 pdi_pio_mapped_addr[7]; /* 6 BARs PLUS 1 ROM */
- u64 pdi_slot_host_handle; /* Bus and devfn Host pci_dev */
-
- struct pcibus_bussoft *pdi_pcibus_info; /* Kernel common bus soft */
- struct pcidev_info *pdi_host_pcidev_info; /* Kernel Host pci_dev */
- struct pci_dev *pdi_linux_pcidev; /* Kernel pci_dev */
-
- struct sn_irq_info *pdi_sn_irq_info;
- struct sn_pcibus_provider *pdi_provider; /* sn pci ops */
- struct pci_dev *host_pci_dev; /* host bus link */
- struct list_head pdi_list; /* List of pcidev_info */
-};
-
-extern void sn_irq_fixup(struct pci_dev *pci_dev,
- struct sn_irq_info *sn_irq_info);
-extern void sn_irq_unfixup(struct pci_dev *pci_dev);
-extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
-extern void sn_bus_fixup(struct pci_bus *);
-extern void sn_acpi_bus_fixup(struct pci_bus *);
-extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
-extern void sn_bus_store_sysdata(struct pci_dev *dev);
-extern void sn_bus_free_sysdata(void);
-extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
-extern void sn_io_slot_fixup(struct pci_dev *);
-extern void sn_acpi_slot_fixup(struct pci_dev *);
-extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
- struct sn_irq_info *);
-extern void sn_pci_unfixup_slot(struct pci_dev *dev);
-extern void sn_irq_lh_init(void);
-#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PDA_H
-#define _ASM_IA64_SN_PDA_H
-
-#include <linux/cache.h>
-#include <asm/percpu.h>
-
-
-/*
- * CPU-specific data structure.
- *
- * One of these structures is allocated for each cpu of a NUMA system.
- *
- * This structure provides a convenient way of keeping together
- * all SN per-cpu data structures.
- */
-
-typedef struct pda_s {
-
- /*
- * Support for SN LEDs
- */
- volatile short *led_address;
- u8 led_state;
- u8 hb_state; /* supports blinking heartbeat leds */
- unsigned int hb_count;
-
- unsigned int idle_flag;
-
- volatile unsigned long *bedrock_rev_id;
- volatile unsigned long *pio_write_status_addr;
- unsigned long pio_write_status_val;
- volatile unsigned long *pio_shub_war_cam_addr;
-
- unsigned long sn_in_service_ivecs[4];
- int sn_lb_int_war_ticks;
- int sn_last_irq;
- int sn_first_irq;
-} pda_t;
-
-
-#define CACHE_ALIGN(x) (((x) + SMP_CACHE_BYTES-1) & ~(SMP_CACHE_BYTES-1))
-
-/*
- * PDA
- * Per-cpu private data area for each cpu. The PDA is located immediately after
- * the IA64 cpu_data area. A full page is allocated for the cp_data area for each
- * cpu but only a small amout of the page is actually used. We put the SNIA PDA
- * in the same page as the cpu_data area. Note that there is a check in the setup
- * code to verify that we don't overflow the page.
- *
- * Seems like we should should cache-line align the pda so that any changes in the
- * size of the cpu_data area don't change cache layout. Should we align to 32, 64, 128
- * or 512 boundary. Each has merits. For now, pick 128 but should be revisited later.
- */
-DECLARE_PER_CPU(struct pda_s, pda_percpu);
-
-#define pda (&__ia64_per_cpu_var(pda_percpu))
-
-#define pdacpu(cpu) (&per_cpu(pda_percpu, cpu))
-
-#endif /* _ASM_IA64_SN_PDA_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_PIC_H
-#define _ASM_IA64_SN_PCI_PIC_H
-
-/*
- * PIC AS DEVICE ZERO
- * ------------------
- *
- * PIC handles PCI/X busses. PCI/X requires that the 'bridge' (i.e. PIC)
- * be designated as 'device 0'. That is a departure from earlier SGI
- * PCI bridges. Because of that we use config space 1 to access the
- * config space of the first actual PCI device on the bus.
- * Here's what the PIC manual says:
- *
- * The current PCI-X bus specification now defines that the parent
- * hosts bus bridge (PIC for example) must be device 0 on bus 0. PIC
- * reduced the total number of devices from 8 to 4 and removed the
- * device registers and windows, now only supporting devices 0,1,2, and
- * 3. PIC did leave all 8 configuration space windows. The reason was
- * there was nothing to gain by removing them. Here in lies the problem.
- * The device numbering we do using 0 through 3 is unrelated to the device
- * numbering which PCI-X requires in configuration space. In the past we
- * correlated Configs pace and our device space 0 <-> 0, 1 <-> 1, etc.
- * PCI-X requires we start a 1, not 0 and currently the PX brick
- * does associate our:
- *
- * device 0 with configuration space window 1,
- * device 1 with configuration space window 2,
- * device 2 with configuration space window 3,
- * device 3 with configuration space window 4.
- *
- * The net effect is that all config space access are off-by-one with
- * relation to other per-slot accesses on the PIC.
- * Here is a table that shows some of that:
- *
- * Internal Slot#
- * |
- * | 0 1 2 3
- * ----------|---------------------------------------
- * config | 0x21000 0x22000 0x23000 0x24000
- * |
- * even rrb | 0[0] n/a 1[0] n/a [] == implied even/odd
- * |
- * odd rrb | n/a 0[1] n/a 1[1]
- * |
- * int dev | 00 01 10 11
- * |
- * ext slot# | 1 2 3 4
- * ----------|---------------------------------------
- */
-
-#define PIC_ATE_TARGETID_SHFT 8
-#define PIC_HOST_INTR_ADDR 0x0000FFFFFFFFFFFFUL
-#define PIC_PCI64_ATTR_TARG_SHFT 60
-
-
-/*****************************************************************************
- *********************** PIC MMR structure mapping ***************************
- *****************************************************************************/
-
-/* NOTE: PIC WAR. PV#854697. PIC does not allow writes just to [31:0]
- * of a 64-bit register. When writing PIC registers, always write the
- * entire 64 bits.
- */
-
-struct pic {
-
- /* 0x000000-0x00FFFF -- Local Registers */
-
- /* 0x000000-0x000057 -- Standard Widget Configuration */
- u64 p_wid_id; /* 0x000000 */
- u64 p_wid_stat; /* 0x000008 */
- u64 p_wid_err_upper; /* 0x000010 */
- u64 p_wid_err_lower; /* 0x000018 */
- #define p_wid_err p_wid_err_lower
- u64 p_wid_control; /* 0x000020 */
- u64 p_wid_req_timeout; /* 0x000028 */
- u64 p_wid_int_upper; /* 0x000030 */
- u64 p_wid_int_lower; /* 0x000038 */
- #define p_wid_int p_wid_int_lower
- u64 p_wid_err_cmdword; /* 0x000040 */
- u64 p_wid_llp; /* 0x000048 */
- u64 p_wid_tflush; /* 0x000050 */
-
- /* 0x000058-0x00007F -- Bridge-specific Widget Configuration */
- u64 p_wid_aux_err; /* 0x000058 */
- u64 p_wid_resp_upper; /* 0x000060 */
- u64 p_wid_resp_lower; /* 0x000068 */
- #define p_wid_resp p_wid_resp_lower
- u64 p_wid_tst_pin_ctrl; /* 0x000070 */
- u64 p_wid_addr_lkerr; /* 0x000078 */
-
- /* 0x000080-0x00008F -- PMU & MAP */
- u64 p_dir_map; /* 0x000080 */
- u64 _pad_000088; /* 0x000088 */
-
- /* 0x000090-0x00009F -- SSRAM */
- u64 p_map_fault; /* 0x000090 */
- u64 _pad_000098; /* 0x000098 */
-
- /* 0x0000A0-0x0000AF -- Arbitration */
- u64 p_arb; /* 0x0000A0 */
- u64 _pad_0000A8; /* 0x0000A8 */
-
- /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
- u64 p_ate_parity_err; /* 0x0000B0 */
- u64 _pad_0000B8; /* 0x0000B8 */
-
- /* 0x0000C0-0x0000FF -- PCI/GIO */
- u64 p_bus_timeout; /* 0x0000C0 */
- u64 p_pci_cfg; /* 0x0000C8 */
- u64 p_pci_err_upper; /* 0x0000D0 */
- u64 p_pci_err_lower; /* 0x0000D8 */
- #define p_pci_err p_pci_err_lower
- u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
-
- /* 0x000100-0x0001FF -- Interrupt */
- u64 p_int_status; /* 0x000100 */
- u64 p_int_enable; /* 0x000108 */
- u64 p_int_rst_stat; /* 0x000110 */
- u64 p_int_mode; /* 0x000118 */
- u64 p_int_device; /* 0x000120 */
- u64 p_int_host_err; /* 0x000128 */
- u64 p_int_addr[8]; /* 0x0001{30,,,68} */
- u64 p_err_int_view; /* 0x000170 */
- u64 p_mult_int; /* 0x000178 */
- u64 p_force_always[8]; /* 0x0001{80,,,B8} */
- u64 p_force_pin[8]; /* 0x0001{C0,,,F8} */
-
- /* 0x000200-0x000298 -- Device */
- u64 p_device[4]; /* 0x0002{00,,,18} */
- u64 _pad_000220[4]; /* 0x0002{20,,,38} */
- u64 p_wr_req_buf[4]; /* 0x0002{40,,,58} */
- u64 _pad_000260[4]; /* 0x0002{60,,,78} */
- u64 p_rrb_map[2]; /* 0x0002{80,,,88} */
- #define p_even_resp p_rrb_map[0] /* 0x000280 */
- #define p_odd_resp p_rrb_map[1] /* 0x000288 */
- u64 p_resp_status; /* 0x000290 */
- u64 p_resp_clear; /* 0x000298 */
-
- u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
-
- /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
- struct {
- u64 upper; /* 0x0003{00,,,F0} */
- u64 lower; /* 0x0003{08,,,F8} */
- } p_buf_addr_match[16];
-
- /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
- struct {
- u64 flush_w_touch; /* 0x000{400,,,5C0} */
- u64 flush_wo_touch; /* 0x000{408,,,5C8} */
- u64 inflight; /* 0x000{410,,,5D0} */
- u64 prefetch; /* 0x000{418,,,5D8} */
- u64 total_pci_retry; /* 0x000{420,,,5E0} */
- u64 max_pci_retry; /* 0x000{428,,,5E8} */
- u64 max_latency; /* 0x000{430,,,5F0} */
- u64 clear_all; /* 0x000{438,,,5F8} */
- } p_buf_count[8];
-
-
- /* 0x000600-0x0009FF -- PCI/X registers */
- u64 p_pcix_bus_err_addr; /* 0x000600 */
- u64 p_pcix_bus_err_attr; /* 0x000608 */
- u64 p_pcix_bus_err_data; /* 0x000610 */
- u64 p_pcix_pio_split_addr; /* 0x000618 */
- u64 p_pcix_pio_split_attr; /* 0x000620 */
- u64 p_pcix_dma_req_err_attr; /* 0x000628 */
- u64 p_pcix_dma_req_err_addr; /* 0x000630 */
- u64 p_pcix_timeout; /* 0x000638 */
-
- u64 _pad_000640[120]; /* 0x000{640,,,9F8} */
-
- /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
- struct {
- u64 p_buf_addr; /* 0x000{A00,,,AF0} */
- u64 p_buf_attr; /* 0X000{A08,,,AF8} */
- } p_pcix_read_buf_64[16];
-
- struct {
- u64 p_buf_addr; /* 0x000{B00,,,BE0} */
- u64 p_buf_attr; /* 0x000{B08,,,BE8} */
- u64 p_buf_valid; /* 0x000{B10,,,BF0} */
- u64 __pad1; /* 0x000{B18,,,BF8} */
- } p_pcix_write_buf_64[8];
-
- /* End of Local Registers -- Start of Address Map space */
-
- char _pad_000c00[0x010000 - 0x000c00];
-
- /* 0x010000-0x011fff -- Internal ATE RAM (Auto Parity Generation) */
- u64 p_int_ate_ram[1024]; /* 0x010000-0x011fff */
-
- /* 0x012000-0x013fff -- Internal ATE RAM (Manual Parity Generation) */
- u64 p_int_ate_ram_mp[1024]; /* 0x012000-0x013fff */
-
- char _pad_014000[0x18000 - 0x014000];
-
- /* 0x18000-0x197F8 -- PIC Write Request Ram */
- u64 p_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
- u64 p_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
- u64 p_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
-
- char _pad_019800[0x20000 - 0x019800];
-
- /* 0x020000-0x027FFF -- PCI Device Configuration Spaces */
- union {
- u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
- u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
- u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
- u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } p_type0_cfg_dev[8]; /* 0x02{0000,,,7FFF} */
-
- /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
- union {
- u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
- u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
- u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
- u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } p_type1_cfg; /* 0x028000-0x029000 */
-
- char _pad_029000[0x030000-0x029000];
-
- /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } p_pci_iack; /* 0x030000-0x030007 */
-
- char _pad_030007[0x040000-0x030008];
-
- /* 0x040000-0x030007 -- PCIX Special Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } p_pcix_cycle; /* 0x040000-0x040007 */
-};
-
-#endif /* _ASM_IA64_SN_PCI_PIC_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002-2006 Silicon Graphics, Inc. All Rights Reserved.
- */
-#ifndef _ASM_IA64_SN_RW_MMR_H
-#define _ASM_IA64_SN_RW_MMR_H
-
-
-/*
- * This file that access MMRs via uncached physical addresses.
- * pio_phys_read_mmr - read an MMR
- * pio_phys_write_mmr - write an MMR
- * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
- * Second MMR will be skipped if address is NULL
- *
- * Addresses passed to these routines should be uncached physical addresses
- * ie., 0x80000....
- */
-
-
-extern long pio_phys_read_mmr(volatile long *mmr);
-extern void pio_phys_write_mmr(volatile long *mmr, long val);
-extern void pio_atomic_phys_write_mmrs(volatile long *mmr1, long val1, volatile long *mmr2, long val2);
-
-#endif /* _ASM_IA64_SN_RW_MMR_H */
+++ /dev/null
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUB_MMR_H
-#define _ASM_IA64_SN_SHUB_MMR_H
-
-/* ==================================================================== */
-/* Register "SH_IPI_INT" */
-/* SHub Inter-Processor Interrupt Registers */
-/* ==================================================================== */
-#define SH1_IPI_INT __IA64_UL_CONST(0x0000000110000380)
-#define SH2_IPI_INT __IA64_UL_CONST(0x0000000010000380)
-
-/* SH_IPI_INT_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_IPI_INT_TYPE_SHFT 0
-#define SH_IPI_INT_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_IPI_INT_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_IPI_INT_AGT_SHFT 3
-#define SH_IPI_INT_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_IPI_INT_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_IPI_INT_PID_SHFT 4
-#define SH_IPI_INT_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_IPI_INT_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_IPI_INT_BASE_SHFT 21
-#define SH_IPI_INT_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_IPI_INT_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_IPI_INT_IDX_SHFT 52
-#define SH_IPI_INT_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* SH_IPI_INT_SEND */
-/* Description: Send Interrupt Message to PI, This generates a puls */
-#define SH_IPI_INT_SEND_SHFT 63
-#define SH_IPI_INT_SEND_MASK __IA64_UL_CONST(0x8000000000000000)
-
-/* ==================================================================== */
-/* Register "SH_EVENT_OCCURRED" */
-/* SHub Interrupt Event Occurred */
-/* ==================================================================== */
-#define SH1_EVENT_OCCURRED __IA64_UL_CONST(0x0000000110010000)
-#define SH1_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000110010008)
-#define SH2_EVENT_OCCURRED __IA64_UL_CONST(0x0000000010010000)
-#define SH2_EVENT_OCCURRED_ALIAS __IA64_UL_CONST(0x0000000010010008)
-
-/* ==================================================================== */
-/* Register "SH_PI_CAM_CONTROL" */
-/* CRB CAM MMR Access Control */
-/* ==================================================================== */
-#define SH1_PI_CAM_CONTROL __IA64_UL_CONST(0x0000000120050300)
-
-/* ==================================================================== */
-/* Register "SH_SHUB_ID" */
-/* SHub ID Number */
-/* ==================================================================== */
-#define SH1_SHUB_ID __IA64_UL_CONST(0x0000000110060580)
-#define SH1_SHUB_ID_REVISION_SHFT 28
-#define SH1_SHUB_ID_REVISION_MASK __IA64_UL_CONST(0x00000000f0000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC" */
-/* Real-time Clock */
-/* ==================================================================== */
-#define SH1_RTC __IA64_UL_CONST(0x00000001101c0000)
-#define SH2_RTC __IA64_UL_CONST(0x00000002101c0000)
-#define SH_RTC_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_PIO_WRITE_STATUS_0|1" */
-/* PIO Write Status for CPU 0 & 1 */
-/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000120070200)
-#define SH1_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000120070280)
-#define SH2_PIO_WRITE_STATUS_0 __IA64_UL_CONST(0x0000000020070200)
-#define SH2_PIO_WRITE_STATUS_1 __IA64_UL_CONST(0x0000000020070280)
-#define SH2_PIO_WRITE_STATUS_2 __IA64_UL_CONST(0x0000000020070300)
-#define SH2_PIO_WRITE_STATUS_3 __IA64_UL_CONST(0x0000000020070380)
-
-/* SH_PIO_WRITE_STATUS_0_WRITE_DEADLOCK */
-/* Description: Deadlock response detected */
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT 1
-#define SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK \
- __IA64_UL_CONST(0x0000000000000002)
-
-/* SH_PIO_WRITE_STATUS_0_PENDING_WRITE_COUNT */
-/* Description: Count of currently pending PIO writes */
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_SHFT 56
-#define SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK \
- __IA64_UL_CONST(0x3f00000000000000)
-
-/* ==================================================================== */
-/* Register "SH_PIO_WRITE_STATUS_0_ALIAS" */
-/* ==================================================================== */
-#define SH1_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000120070208)
-#define SH2_PIO_WRITE_STATUS_0_ALIAS __IA64_UL_CONST(0x0000000020070208)
-
-/* ==================================================================== */
-/* Register "SH_EVENT_OCCURRED" */
-/* SHub Interrupt Event Occurred */
-/* ==================================================================== */
-/* SH_EVENT_OCCURRED_UART_INT */
-/* Description: Pending Junk Bus UART Interrupt */
-#define SH_EVENT_OCCURRED_UART_INT_SHFT 20
-#define SH_EVENT_OCCURRED_UART_INT_MASK __IA64_UL_CONST(0x0000000000100000)
-
-/* SH_EVENT_OCCURRED_IPI_INT */
-/* Description: Pending IPI Interrupt */
-#define SH_EVENT_OCCURRED_IPI_INT_SHFT 28
-#define SH_EVENT_OCCURRED_IPI_INT_MASK __IA64_UL_CONST(0x0000000010000000)
-
-/* SH_EVENT_OCCURRED_II_INT0 */
-/* Description: Pending II 0 Interrupt */
-#define SH_EVENT_OCCURRED_II_INT0_SHFT 29
-#define SH_EVENT_OCCURRED_II_INT0_MASK __IA64_UL_CONST(0x0000000020000000)
-
-/* SH_EVENT_OCCURRED_II_INT1 */
-/* Description: Pending II 1 Interrupt */
-#define SH_EVENT_OCCURRED_II_INT1_SHFT 30
-#define SH_EVENT_OCCURRED_II_INT1_MASK __IA64_UL_CONST(0x0000000040000000)
-
-/* SH2_EVENT_OCCURRED_EXTIO_INT2 */
-/* Description: Pending SHUB 2 EXT IO INT2 */
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_SHFT 33
-#define SH2_EVENT_OCCURRED_EXTIO_INT2_MASK __IA64_UL_CONST(0x0000000200000000)
-
-/* SH2_EVENT_OCCURRED_EXTIO_INT3 */
-/* Description: Pending SHUB 2 EXT IO INT3 */
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_SHFT 34
-#define SH2_EVENT_OCCURRED_EXTIO_INT3_MASK __IA64_UL_CONST(0x0000000400000000)
-
-#define SH_ALL_INT_MASK \
- (SH_EVENT_OCCURRED_UART_INT_MASK | SH_EVENT_OCCURRED_IPI_INT_MASK | \
- SH_EVENT_OCCURRED_II_INT0_MASK | SH_EVENT_OCCURRED_II_INT1_MASK | \
- SH_EVENT_OCCURRED_II_INT1_MASK | SH2_EVENT_OCCURRED_EXTIO_INT2_MASK | \
- SH2_EVENT_OCCURRED_EXTIO_INT3_MASK)
-
-
-/* ==================================================================== */
-/* LEDS */
-/* ==================================================================== */
-#define SH1_REAL_JUNK_BUS_LED0 0x7fed00000UL
-#define SH1_REAL_JUNK_BUS_LED1 0x7fed10000UL
-#define SH1_REAL_JUNK_BUS_LED2 0x7fed20000UL
-#define SH1_REAL_JUNK_BUS_LED3 0x7fed30000UL
-
-#define SH2_REAL_JUNK_BUS_LED0 0xf0000000UL
-#define SH2_REAL_JUNK_BUS_LED1 0xf0010000UL
-#define SH2_REAL_JUNK_BUS_LED2 0xf0020000UL
-#define SH2_REAL_JUNK_BUS_LED3 0xf0030000UL
-
-/* ==================================================================== */
-/* Register "SH1_PTC_0" */
-/* Puge Translation Cache Message Configuration Information */
-/* ==================================================================== */
-#define SH1_PTC_0 __IA64_UL_CONST(0x00000001101a0000)
-
-/* SH1_PTC_0_A */
-/* Description: Type */
-#define SH1_PTC_0_A_SHFT 0
-
-/* SH1_PTC_0_PS */
-/* Description: Page Size */
-#define SH1_PTC_0_PS_SHFT 2
-
-/* SH1_PTC_0_RID */
-/* Description: Region ID */
-#define SH1_PTC_0_RID_SHFT 8
-
-/* SH1_PTC_0_START */
-/* Description: Start */
-#define SH1_PTC_0_START_SHFT 63
-
-/* ==================================================================== */
-/* Register "SH1_PTC_1" */
-/* Puge Translation Cache Message Configuration Information */
-/* ==================================================================== */
-#define SH1_PTC_1 __IA64_UL_CONST(0x00000001101a0080)
-
-/* SH1_PTC_1_START */
-/* Description: PTC_1 Start */
-#define SH1_PTC_1_START_SHFT 63
-
-/* ==================================================================== */
-/* Register "SH2_PTC" */
-/* Puge Translation Cache Message Configuration Information */
-/* ==================================================================== */
-#define SH2_PTC __IA64_UL_CONST(0x0000000170000000)
-
-/* SH2_PTC_A */
-/* Description: Type */
-#define SH2_PTC_A_SHFT 0
-
-/* SH2_PTC_PS */
-/* Description: Page Size */
-#define SH2_PTC_PS_SHFT 2
-
-/* SH2_PTC_RID */
-/* Description: Region ID */
-#define SH2_PTC_RID_SHFT 4
-
-/* SH2_PTC_START */
-/* Description: Start */
-#define SH2_PTC_START_SHFT 63
-
-/* SH2_PTC_ADDR_RID */
-/* Description: Region ID */
-#define SH2_PTC_ADDR_SHFT 4
-#define SH2_PTC_ADDR_MASK __IA64_UL_CONST(0x1ffffffffffff000)
-
-/* ==================================================================== */
-/* Register "SH_RTC1_INT_CONFIG" */
-/* SHub RTC 1 Interrupt Config Registers */
-/* ==================================================================== */
-
-#define SH1_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000110001480)
-#define SH2_RTC1_INT_CONFIG __IA64_UL_CONST(0x0000000010001480)
-#define SH_RTC1_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC1_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC1_INT_CONFIG_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC1_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC1_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_RTC1_INT_CONFIG_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_RTC1_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC1_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_RTC1_INT_CONFIG_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC1_INT_CONFIG_PID_SHFT 4
-#define SH_RTC1_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_RTC1_INT_CONFIG_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC1_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC1_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_RTC1_INT_CONFIG_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC1_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC1_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC1_INT_ENABLE" */
-/* SHub RTC 1 Interrupt Enable Registers */
-/* ==================================================================== */
-
-#define SH1_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000110001500)
-#define SH2_RTC1_INT_ENABLE __IA64_UL_CONST(0x0000000010001500)
-#define SH_RTC1_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC1_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC1_INT_ENABLE_RTC1_ENABLE */
-/* Description: Enable RTC 1 Interrupt */
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_SHFT 0
-#define SH_RTC1_INT_ENABLE_RTC1_ENABLE_MASK \
- __IA64_UL_CONST(0x0000000000000001)
-
-/* ==================================================================== */
-/* Register "SH_RTC2_INT_CONFIG" */
-/* SHub RTC 2 Interrupt Config Registers */
-/* ==================================================================== */
-
-#define SH1_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000110001580)
-#define SH2_RTC2_INT_CONFIG __IA64_UL_CONST(0x0000000010001580)
-#define SH_RTC2_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC2_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC2_INT_CONFIG_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC2_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC2_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_RTC2_INT_CONFIG_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_RTC2_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC2_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_RTC2_INT_CONFIG_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC2_INT_CONFIG_PID_SHFT 4
-#define SH_RTC2_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_RTC2_INT_CONFIG_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC2_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC2_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_RTC2_INT_CONFIG_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC2_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC2_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC2_INT_ENABLE" */
-/* SHub RTC 2 Interrupt Enable Registers */
-/* ==================================================================== */
-
-#define SH1_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000110001600)
-#define SH2_RTC2_INT_ENABLE __IA64_UL_CONST(0x0000000010001600)
-#define SH_RTC2_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC2_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC2_INT_ENABLE_RTC2_ENABLE */
-/* Description: Enable RTC 2 Interrupt */
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_SHFT 0
-#define SH_RTC2_INT_ENABLE_RTC2_ENABLE_MASK \
- __IA64_UL_CONST(0x0000000000000001)
-
-/* ==================================================================== */
-/* Register "SH_RTC3_INT_CONFIG" */
-/* SHub RTC 3 Interrupt Config Registers */
-/* ==================================================================== */
-
-#define SH1_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000110001680)
-#define SH2_RTC3_INT_CONFIG __IA64_UL_CONST(0x0000000010001680)
-#define SH_RTC3_INT_CONFIG_MASK __IA64_UL_CONST(0x0ff3ffffffefffff)
-#define SH_RTC3_INT_CONFIG_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC3_INT_CONFIG_TYPE */
-/* Description: Type of Interrupt: 0=INT, 2=PMI, 4=NMI, 5=INIT */
-#define SH_RTC3_INT_CONFIG_TYPE_SHFT 0
-#define SH_RTC3_INT_CONFIG_TYPE_MASK __IA64_UL_CONST(0x0000000000000007)
-
-/* SH_RTC3_INT_CONFIG_AGT */
-/* Description: Agent, must be 0 for SHub */
-#define SH_RTC3_INT_CONFIG_AGT_SHFT 3
-#define SH_RTC3_INT_CONFIG_AGT_MASK __IA64_UL_CONST(0x0000000000000008)
-
-/* SH_RTC3_INT_CONFIG_PID */
-/* Description: Processor ID, same setting as on targeted McKinley */
-#define SH_RTC3_INT_CONFIG_PID_SHFT 4
-#define SH_RTC3_INT_CONFIG_PID_MASK __IA64_UL_CONST(0x00000000000ffff0)
-
-/* SH_RTC3_INT_CONFIG_BASE */
-/* Description: Optional interrupt vector area, 2MB aligned */
-#define SH_RTC3_INT_CONFIG_BASE_SHFT 21
-#define SH_RTC3_INT_CONFIG_BASE_MASK __IA64_UL_CONST(0x0003ffffffe00000)
-
-/* SH_RTC3_INT_CONFIG_IDX */
-/* Description: Targeted McKinley interrupt vector */
-#define SH_RTC3_INT_CONFIG_IDX_SHFT 52
-#define SH_RTC3_INT_CONFIG_IDX_MASK __IA64_UL_CONST(0x0ff0000000000000)
-
-/* ==================================================================== */
-/* Register "SH_RTC3_INT_ENABLE" */
-/* SHub RTC 3 Interrupt Enable Registers */
-/* ==================================================================== */
-
-#define SH1_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000110001700)
-#define SH2_RTC3_INT_ENABLE __IA64_UL_CONST(0x0000000010001700)
-#define SH_RTC3_INT_ENABLE_MASK __IA64_UL_CONST(0x0000000000000001)
-#define SH_RTC3_INT_ENABLE_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_RTC3_INT_ENABLE_RTC3_ENABLE */
-/* Description: Enable RTC 3 Interrupt */
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_SHFT 0
-#define SH_RTC3_INT_ENABLE_RTC3_ENABLE_MASK \
- __IA64_UL_CONST(0x0000000000000001)
-
-/* SH_EVENT_OCCURRED_RTC1_INT */
-/* Description: Pending RTC 1 Interrupt */
-#define SH_EVENT_OCCURRED_RTC1_INT_SHFT 24
-#define SH_EVENT_OCCURRED_RTC1_INT_MASK __IA64_UL_CONST(0x0000000001000000)
-
-/* SH_EVENT_OCCURRED_RTC2_INT */
-/* Description: Pending RTC 2 Interrupt */
-#define SH_EVENT_OCCURRED_RTC2_INT_SHFT 25
-#define SH_EVENT_OCCURRED_RTC2_INT_MASK __IA64_UL_CONST(0x0000000002000000)
-
-/* SH_EVENT_OCCURRED_RTC3_INT */
-/* Description: Pending RTC 3 Interrupt */
-#define SH_EVENT_OCCURRED_RTC3_INT_SHFT 26
-#define SH_EVENT_OCCURRED_RTC3_INT_MASK __IA64_UL_CONST(0x0000000004000000)
-
-/* ==================================================================== */
-/* Register "SH_IPI_ACCESS" */
-/* CPU interrupt Access Permission Bits */
-/* ==================================================================== */
-
-#define SH1_IPI_ACCESS __IA64_UL_CONST(0x0000000110060480)
-#define SH2_IPI_ACCESS0 __IA64_UL_CONST(0x0000000010060c00)
-#define SH2_IPI_ACCESS1 __IA64_UL_CONST(0x0000000010060c80)
-#define SH2_IPI_ACCESS2 __IA64_UL_CONST(0x0000000010060d00)
-#define SH2_IPI_ACCESS3 __IA64_UL_CONST(0x0000000010060d80)
-
-/* ==================================================================== */
-/* Register "SH_INT_CMPB" */
-/* RTC Compare Value for Processor B */
-/* ==================================================================== */
-
-#define SH1_INT_CMPB __IA64_UL_CONST(0x00000001101b0080)
-#define SH2_INT_CMPB __IA64_UL_CONST(0x00000000101b0080)
-#define SH_INT_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPB_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_INT_CMPB_REAL_TIME_CMPB */
-/* Description: Real Time Clock Compare */
-#define SH_INT_CMPB_REAL_TIME_CMPB_SHFT 0
-#define SH_INT_CMPB_REAL_TIME_CMPB_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_INT_CMPC" */
-/* RTC Compare Value for Processor C */
-/* ==================================================================== */
-
-#define SH1_INT_CMPC __IA64_UL_CONST(0x00000001101b0100)
-#define SH2_INT_CMPC __IA64_UL_CONST(0x00000000101b0100)
-#define SH_INT_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPC_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_INT_CMPC_REAL_TIME_CMPC */
-/* Description: Real Time Clock Compare */
-#define SH_INT_CMPC_REAL_TIME_CMPC_SHFT 0
-#define SH_INT_CMPC_REAL_TIME_CMPC_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_INT_CMPD" */
-/* RTC Compare Value for Processor D */
-/* ==================================================================== */
-
-#define SH1_INT_CMPD __IA64_UL_CONST(0x00000001101b0180)
-#define SH2_INT_CMPD __IA64_UL_CONST(0x00000000101b0180)
-#define SH_INT_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff)
-#define SH_INT_CMPD_INIT __IA64_UL_CONST(0x0000000000000000)
-
-/* SH_INT_CMPD_REAL_TIME_CMPD */
-/* Description: Real Time Clock Compare */
-#define SH_INT_CMPD_REAL_TIME_CMPD_SHFT 0
-#define SH_INT_CMPD_REAL_TIME_CMPD_MASK __IA64_UL_CONST(0x007fffffffffffff)
-
-/* ==================================================================== */
-/* Register "SH_MD_DQLP_MMR_DIR_PRIVEC0" */
-/* privilege vector for acc=0 */
-/* ==================================================================== */
-#define SH1_MD_DQLP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100030300)
-
-/* ==================================================================== */
-/* Register "SH_MD_DQRP_MMR_DIR_PRIVEC0" */
-/* privilege vector for acc=0 */
-/* ==================================================================== */
-#define SH1_MD_DQRP_MMR_DIR_PRIVEC0 __IA64_UL_CONST(0x0000000100050300)
-
-/* ==================================================================== */
-/* Some MMRs are functionally identical (or close enough) on both SHUB1 */
-/* and SHUB2 that it makes sense to define a geberic name for the MMR. */
-/* It is acceptable to use (for example) SH_IPI_INT to reference the */
-/* the IPI MMR. The value of SH_IPI_INT is determined at runtime based */
-/* on the type of the SHUB. Do not use these #defines in performance */
-/* critical code or loops - there is a small performance penalty. */
-/* ==================================================================== */
-#define shubmmr(a,b) (is_shub2() ? a##2_##b : a##1_##b)
-
-#define SH_REAL_JUNK_BUS_LED0 shubmmr(SH, REAL_JUNK_BUS_LED0)
-#define SH_IPI_INT shubmmr(SH, IPI_INT)
-#define SH_EVENT_OCCURRED shubmmr(SH, EVENT_OCCURRED)
-#define SH_EVENT_OCCURRED_ALIAS shubmmr(SH, EVENT_OCCURRED_ALIAS)
-#define SH_RTC shubmmr(SH, RTC)
-#define SH_RTC1_INT_CONFIG shubmmr(SH, RTC1_INT_CONFIG)
-#define SH_RTC1_INT_ENABLE shubmmr(SH, RTC1_INT_ENABLE)
-#define SH_RTC2_INT_CONFIG shubmmr(SH, RTC2_INT_CONFIG)
-#define SH_RTC2_INT_ENABLE shubmmr(SH, RTC2_INT_ENABLE)
-#define SH_RTC3_INT_CONFIG shubmmr(SH, RTC3_INT_CONFIG)
-#define SH_RTC3_INT_ENABLE shubmmr(SH, RTC3_INT_ENABLE)
-#define SH_INT_CMPB shubmmr(SH, INT_CMPB)
-#define SH_INT_CMPC shubmmr(SH, INT_CMPC)
-#define SH_INT_CMPD shubmmr(SH, INT_CMPD)
-
-/* ========================================================================== */
-/* Register "SH2_BT_ENG_CSR_0" */
-/* Engine 0 Control and Status Register */
-/* ========================================================================== */
-
-#define SH2_BT_ENG_CSR_0 __IA64_UL_CONST(0x0000000030040000)
-#define SH2_BT_ENG_SRC_ADDR_0 __IA64_UL_CONST(0x0000000030040080)
-#define SH2_BT_ENG_DEST_ADDR_0 __IA64_UL_CONST(0x0000000030040100)
-#define SH2_BT_ENG_NOTIF_ADDR_0 __IA64_UL_CONST(0x0000000030040180)
-
-/* ========================================================================== */
-/* BTE interfaces 1-3 */
-/* ========================================================================== */
-
-#define SH2_BT_ENG_CSR_1 __IA64_UL_CONST(0x0000000030050000)
-#define SH2_BT_ENG_CSR_2 __IA64_UL_CONST(0x0000000030060000)
-#define SH2_BT_ENG_CSR_3 __IA64_UL_CONST(0x0000000030070000)
-
-#endif /* _ASM_IA64_SN_SHUB_MMR_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_SHUBIO_H
-#define _ASM_IA64_SN_SHUBIO_H
-
-#define HUB_WIDGET_ID_MAX 0xf
-#define IIO_NUM_ITTES 7
-#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
-
-#define IIO_WID 0x00400000 /* Crosstalk Widget Identification */
- /* This register is also accessible from
- * Crosstalk at address 0x0. */
-#define IIO_WSTAT 0x00400008 /* Crosstalk Widget Status */
-#define IIO_WCR 0x00400020 /* Crosstalk Widget Control Register */
-#define IIO_ILAPR 0x00400100 /* IO Local Access Protection Register */
-#define IIO_ILAPO 0x00400108 /* IO Local Access Protection Override */
-#define IIO_IOWA 0x00400110 /* IO Outbound Widget Access */
-#define IIO_IIWA 0x00400118 /* IO Inbound Widget Access */
-#define IIO_IIDEM 0x00400120 /* IO Inbound Device Error Mask */
-#define IIO_ILCSR 0x00400128 /* IO LLP Control and Status Register */
-#define IIO_ILLR 0x00400130 /* IO LLP Log Register */
-#define IIO_IIDSR 0x00400138 /* IO Interrupt Destination */
-
-#define IIO_IGFX0 0x00400140 /* IO Graphics Node-Widget Map 0 */
-#define IIO_IGFX1 0x00400148 /* IO Graphics Node-Widget Map 1 */
-
-#define IIO_ISCR0 0x00400150 /* IO Scratch Register 0 */
-#define IIO_ISCR1 0x00400158 /* IO Scratch Register 1 */
-
-#define IIO_ITTE1 0x00400160 /* IO Translation Table Entry 1 */
-#define IIO_ITTE2 0x00400168 /* IO Translation Table Entry 2 */
-#define IIO_ITTE3 0x00400170 /* IO Translation Table Entry 3 */
-#define IIO_ITTE4 0x00400178 /* IO Translation Table Entry 4 */
-#define IIO_ITTE5 0x00400180 /* IO Translation Table Entry 5 */
-#define IIO_ITTE6 0x00400188 /* IO Translation Table Entry 6 */
-#define IIO_ITTE7 0x00400190 /* IO Translation Table Entry 7 */
-
-#define IIO_IPRB0 0x00400198 /* IO PRB Entry 0 */
-#define IIO_IPRB8 0x004001A0 /* IO PRB Entry 8 */
-#define IIO_IPRB9 0x004001A8 /* IO PRB Entry 9 */
-#define IIO_IPRBA 0x004001B0 /* IO PRB Entry A */
-#define IIO_IPRBB 0x004001B8 /* IO PRB Entry B */
-#define IIO_IPRBC 0x004001C0 /* IO PRB Entry C */
-#define IIO_IPRBD 0x004001C8 /* IO PRB Entry D */
-#define IIO_IPRBE 0x004001D0 /* IO PRB Entry E */
-#define IIO_IPRBF 0x004001D8 /* IO PRB Entry F */
-
-#define IIO_IXCC 0x004001E0 /* IO Crosstalk Credit Count Timeout */
-#define IIO_IMEM 0x004001E8 /* IO Miscellaneous Error Mask */
-#define IIO_IXTT 0x004001F0 /* IO Crosstalk Timeout Threshold */
-#define IIO_IECLR 0x004001F8 /* IO Error Clear Register */
-#define IIO_IBCR 0x00400200 /* IO BTE Control Register */
-
-#define IIO_IXSM 0x00400208 /* IO Crosstalk Spurious Message */
-#define IIO_IXSS 0x00400210 /* IO Crosstalk Spurious Sideband */
-
-#define IIO_ILCT 0x00400218 /* IO LLP Channel Test */
-
-#define IIO_IIEPH1 0x00400220 /* IO Incoming Error Packet Header, Part 1 */
-#define IIO_IIEPH2 0x00400228 /* IO Incoming Error Packet Header, Part 2 */
-
-#define IIO_ISLAPR 0x00400230 /* IO SXB Local Access Protection Regster */
-#define IIO_ISLAPO 0x00400238 /* IO SXB Local Access Protection Override */
-
-#define IIO_IWI 0x00400240 /* IO Wrapper Interrupt Register */
-#define IIO_IWEL 0x00400248 /* IO Wrapper Error Log Register */
-#define IIO_IWC 0x00400250 /* IO Wrapper Control Register */
-#define IIO_IWS 0x00400258 /* IO Wrapper Status Register */
-#define IIO_IWEIM 0x00400260 /* IO Wrapper Error Interrupt Masking Register */
-
-#define IIO_IPCA 0x00400300 /* IO PRB Counter Adjust */
-
-#define IIO_IPRTE0_A 0x00400308 /* IO PIO Read Address Table Entry 0, Part A */
-#define IIO_IPRTE1_A 0x00400310 /* IO PIO Read Address Table Entry 1, Part A */
-#define IIO_IPRTE2_A 0x00400318 /* IO PIO Read Address Table Entry 2, Part A */
-#define IIO_IPRTE3_A 0x00400320 /* IO PIO Read Address Table Entry 3, Part A */
-#define IIO_IPRTE4_A 0x00400328 /* IO PIO Read Address Table Entry 4, Part A */
-#define IIO_IPRTE5_A 0x00400330 /* IO PIO Read Address Table Entry 5, Part A */
-#define IIO_IPRTE6_A 0x00400338 /* IO PIO Read Address Table Entry 6, Part A */
-#define IIO_IPRTE7_A 0x00400340 /* IO PIO Read Address Table Entry 7, Part A */
-
-#define IIO_IPRTE0_B 0x00400348 /* IO PIO Read Address Table Entry 0, Part B */
-#define IIO_IPRTE1_B 0x00400350 /* IO PIO Read Address Table Entry 1, Part B */
-#define IIO_IPRTE2_B 0x00400358 /* IO PIO Read Address Table Entry 2, Part B */
-#define IIO_IPRTE3_B 0x00400360 /* IO PIO Read Address Table Entry 3, Part B */
-#define IIO_IPRTE4_B 0x00400368 /* IO PIO Read Address Table Entry 4, Part B */
-#define IIO_IPRTE5_B 0x00400370 /* IO PIO Read Address Table Entry 5, Part B */
-#define IIO_IPRTE6_B 0x00400378 /* IO PIO Read Address Table Entry 6, Part B */
-#define IIO_IPRTE7_B 0x00400380 /* IO PIO Read Address Table Entry 7, Part B */
-
-#define IIO_IPDR 0x00400388 /* IO PIO Deallocation Register */
-#define IIO_ICDR 0x00400390 /* IO CRB Entry Deallocation Register */
-#define IIO_IFDR 0x00400398 /* IO IOQ FIFO Depth Register */
-#define IIO_IIAP 0x004003A0 /* IO IIQ Arbitration Parameters */
-#define IIO_ICMR 0x004003A8 /* IO CRB Management Register */
-#define IIO_ICCR 0x004003B0 /* IO CRB Control Register */
-#define IIO_ICTO 0x004003B8 /* IO CRB Timeout */
-#define IIO_ICTP 0x004003C0 /* IO CRB Timeout Prescalar */
-
-#define IIO_ICRB0_A 0x00400400 /* IO CRB Entry 0_A */
-#define IIO_ICRB0_B 0x00400408 /* IO CRB Entry 0_B */
-#define IIO_ICRB0_C 0x00400410 /* IO CRB Entry 0_C */
-#define IIO_ICRB0_D 0x00400418 /* IO CRB Entry 0_D */
-#define IIO_ICRB0_E 0x00400420 /* IO CRB Entry 0_E */
-
-#define IIO_ICRB1_A 0x00400430 /* IO CRB Entry 1_A */
-#define IIO_ICRB1_B 0x00400438 /* IO CRB Entry 1_B */
-#define IIO_ICRB1_C 0x00400440 /* IO CRB Entry 1_C */
-#define IIO_ICRB1_D 0x00400448 /* IO CRB Entry 1_D */
-#define IIO_ICRB1_E 0x00400450 /* IO CRB Entry 1_E */
-
-#define IIO_ICRB2_A 0x00400460 /* IO CRB Entry 2_A */
-#define IIO_ICRB2_B 0x00400468 /* IO CRB Entry 2_B */
-#define IIO_ICRB2_C 0x00400470 /* IO CRB Entry 2_C */
-#define IIO_ICRB2_D 0x00400478 /* IO CRB Entry 2_D */
-#define IIO_ICRB2_E 0x00400480 /* IO CRB Entry 2_E */
-
-#define IIO_ICRB3_A 0x00400490 /* IO CRB Entry 3_A */
-#define IIO_ICRB3_B 0x00400498 /* IO CRB Entry 3_B */
-#define IIO_ICRB3_C 0x004004a0 /* IO CRB Entry 3_C */
-#define IIO_ICRB3_D 0x004004a8 /* IO CRB Entry 3_D */
-#define IIO_ICRB3_E 0x004004b0 /* IO CRB Entry 3_E */
-
-#define IIO_ICRB4_A 0x004004c0 /* IO CRB Entry 4_A */
-#define IIO_ICRB4_B 0x004004c8 /* IO CRB Entry 4_B */
-#define IIO_ICRB4_C 0x004004d0 /* IO CRB Entry 4_C */
-#define IIO_ICRB4_D 0x004004d8 /* IO CRB Entry 4_D */
-#define IIO_ICRB4_E 0x004004e0 /* IO CRB Entry 4_E */
-
-#define IIO_ICRB5_A 0x004004f0 /* IO CRB Entry 5_A */
-#define IIO_ICRB5_B 0x004004f8 /* IO CRB Entry 5_B */
-#define IIO_ICRB5_C 0x00400500 /* IO CRB Entry 5_C */
-#define IIO_ICRB5_D 0x00400508 /* IO CRB Entry 5_D */
-#define IIO_ICRB5_E 0x00400510 /* IO CRB Entry 5_E */
-
-#define IIO_ICRB6_A 0x00400520 /* IO CRB Entry 6_A */
-#define IIO_ICRB6_B 0x00400528 /* IO CRB Entry 6_B */
-#define IIO_ICRB6_C 0x00400530 /* IO CRB Entry 6_C */
-#define IIO_ICRB6_D 0x00400538 /* IO CRB Entry 6_D */
-#define IIO_ICRB6_E 0x00400540 /* IO CRB Entry 6_E */
-
-#define IIO_ICRB7_A 0x00400550 /* IO CRB Entry 7_A */
-#define IIO_ICRB7_B 0x00400558 /* IO CRB Entry 7_B */
-#define IIO_ICRB7_C 0x00400560 /* IO CRB Entry 7_C */
-#define IIO_ICRB7_D 0x00400568 /* IO CRB Entry 7_D */
-#define IIO_ICRB7_E 0x00400570 /* IO CRB Entry 7_E */
-
-#define IIO_ICRB8_A 0x00400580 /* IO CRB Entry 8_A */
-#define IIO_ICRB8_B 0x00400588 /* IO CRB Entry 8_B */
-#define IIO_ICRB8_C 0x00400590 /* IO CRB Entry 8_C */
-#define IIO_ICRB8_D 0x00400598 /* IO CRB Entry 8_D */
-#define IIO_ICRB8_E 0x004005a0 /* IO CRB Entry 8_E */
-
-#define IIO_ICRB9_A 0x004005b0 /* IO CRB Entry 9_A */
-#define IIO_ICRB9_B 0x004005b8 /* IO CRB Entry 9_B */
-#define IIO_ICRB9_C 0x004005c0 /* IO CRB Entry 9_C */
-#define IIO_ICRB9_D 0x004005c8 /* IO CRB Entry 9_D */
-#define IIO_ICRB9_E 0x004005d0 /* IO CRB Entry 9_E */
-
-#define IIO_ICRBA_A 0x004005e0 /* IO CRB Entry A_A */
-#define IIO_ICRBA_B 0x004005e8 /* IO CRB Entry A_B */
-#define IIO_ICRBA_C 0x004005f0 /* IO CRB Entry A_C */
-#define IIO_ICRBA_D 0x004005f8 /* IO CRB Entry A_D */
-#define IIO_ICRBA_E 0x00400600 /* IO CRB Entry A_E */
-
-#define IIO_ICRBB_A 0x00400610 /* IO CRB Entry B_A */
-#define IIO_ICRBB_B 0x00400618 /* IO CRB Entry B_B */
-#define IIO_ICRBB_C 0x00400620 /* IO CRB Entry B_C */
-#define IIO_ICRBB_D 0x00400628 /* IO CRB Entry B_D */
-#define IIO_ICRBB_E 0x00400630 /* IO CRB Entry B_E */
-
-#define IIO_ICRBC_A 0x00400640 /* IO CRB Entry C_A */
-#define IIO_ICRBC_B 0x00400648 /* IO CRB Entry C_B */
-#define IIO_ICRBC_C 0x00400650 /* IO CRB Entry C_C */
-#define IIO_ICRBC_D 0x00400658 /* IO CRB Entry C_D */
-#define IIO_ICRBC_E 0x00400660 /* IO CRB Entry C_E */
-
-#define IIO_ICRBD_A 0x00400670 /* IO CRB Entry D_A */
-#define IIO_ICRBD_B 0x00400678 /* IO CRB Entry D_B */
-#define IIO_ICRBD_C 0x00400680 /* IO CRB Entry D_C */
-#define IIO_ICRBD_D 0x00400688 /* IO CRB Entry D_D */
-#define IIO_ICRBD_E 0x00400690 /* IO CRB Entry D_E */
-
-#define IIO_ICRBE_A 0x004006a0 /* IO CRB Entry E_A */
-#define IIO_ICRBE_B 0x004006a8 /* IO CRB Entry E_B */
-#define IIO_ICRBE_C 0x004006b0 /* IO CRB Entry E_C */
-#define IIO_ICRBE_D 0x004006b8 /* IO CRB Entry E_D */
-#define IIO_ICRBE_E 0x004006c0 /* IO CRB Entry E_E */
-
-#define IIO_ICSML 0x00400700 /* IO CRB Spurious Message Low */
-#define IIO_ICSMM 0x00400708 /* IO CRB Spurious Message Middle */
-#define IIO_ICSMH 0x00400710 /* IO CRB Spurious Message High */
-
-#define IIO_IDBSS 0x00400718 /* IO Debug Submenu Select */
-
-#define IIO_IBLS0 0x00410000 /* IO BTE Length Status 0 */
-#define IIO_IBSA0 0x00410008 /* IO BTE Source Address 0 */
-#define IIO_IBDA0 0x00410010 /* IO BTE Destination Address 0 */
-#define IIO_IBCT0 0x00410018 /* IO BTE Control Terminate 0 */
-#define IIO_IBNA0 0x00410020 /* IO BTE Notification Address 0 */
-#define IIO_IBIA0 0x00410028 /* IO BTE Interrupt Address 0 */
-#define IIO_IBLS1 0x00420000 /* IO BTE Length Status 1 */
-#define IIO_IBSA1 0x00420008 /* IO BTE Source Address 1 */
-#define IIO_IBDA1 0x00420010 /* IO BTE Destination Address 1 */
-#define IIO_IBCT1 0x00420018 /* IO BTE Control Terminate 1 */
-#define IIO_IBNA1 0x00420020 /* IO BTE Notification Address 1 */
-#define IIO_IBIA1 0x00420028 /* IO BTE Interrupt Address 1 */
-
-#define IIO_IPCR 0x00430000 /* IO Performance Control */
-#define IIO_IPPR 0x00430008 /* IO Performance Profiling */
-
-/************************************************************************
- * *
- * Description: This register echoes some information from the *
- * LB_REV_ID register. It is available through Crosstalk as described *
- * above. The REV_NUM and MFG_NUM fields receive their values from *
- * the REVISION and MANUFACTURER fields in the LB_REV_ID register. *
- * The PART_NUM field's value is the Crosstalk device ID number that *
- * Steve Miller assigned to the SHub chip. *
- * *
- ************************************************************************/
-
-typedef union ii_wid_u {
- u64 ii_wid_regval;
- struct {
- u64 w_rsvd_1:1;
- u64 w_mfg_num:11;
- u64 w_part_num:16;
- u64 w_rev_num:4;
- u64 w_rsvd:32;
- } ii_wid_fld_s;
-} ii_wid_u_t;
-
-/************************************************************************
- * *
- * The fields in this register are set upon detection of an error *
- * and cleared by various mechanisms, as explained in the *
- * description. *
- * *
- ************************************************************************/
-
-typedef union ii_wstat_u {
- u64 ii_wstat_regval;
- struct {
- u64 w_pending:4;
- u64 w_xt_crd_to:1;
- u64 w_xt_tail_to:1;
- u64 w_rsvd_3:3;
- u64 w_tx_mx_rty:1;
- u64 w_rsvd_2:6;
- u64 w_llp_tx_cnt:8;
- u64 w_rsvd_1:8;
- u64 w_crazy:1;
- u64 w_rsvd:31;
- } ii_wstat_fld_s;
-} ii_wstat_u_t;
-
-/************************************************************************
- * *
- * Description: This is a read-write enabled register. It controls *
- * various aspects of the Crosstalk flow control. *
- * *
- ************************************************************************/
-
-typedef union ii_wcr_u {
- u64 ii_wcr_regval;
- struct {
- u64 w_wid:4;
- u64 w_tag:1;
- u64 w_rsvd_1:8;
- u64 w_dst_crd:3;
- u64 w_f_bad_pkt:1;
- u64 w_dir_con:1;
- u64 w_e_thresh:5;
- u64 w_rsvd:41;
- } ii_wcr_fld_s;
-} ii_wcr_u_t;
-
-/************************************************************************
- * *
- * Description: This register's value is a bit vector that guards *
- * access to local registers within the II as well as to external *
- * Crosstalk widgets. Each bit in the register corresponds to a *
- * particular region in the system; a region consists of one, two or *
- * four nodes (depending on the value of the REGION_SIZE field in the *
- * LB_REV_ID register, which is documented in Section 8.3.1.1). The *
- * protection provided by this register applies to PIO read *
- * operations as well as PIO write operations. The II will perform a *
- * PIO read or write request only if the bit for the requestor's *
- * region is set; otherwise, the II will not perform the requested *
- * operation and will return an error response. When a PIO read or *
- * write request targets an external Crosstalk widget, then not only *
- * must the bit for the requestor's region be set in the ILAPR, but *
- * also the target widget's bit in the IOWA register must be set in *
- * order for the II to perform the requested operation; otherwise, *
- * the II will return an error response. Hence, the protection *
- * provided by the IOWA register supplements the protection provided *
- * by the ILAPR for requests that target external Crosstalk widgets. *
- * This register itself can be accessed only by the nodes whose *
- * region ID bits are enabled in this same register. It can also be *
- * accessed through the IAlias space by the local processors. *
- * The reset value of this register allows access by all nodes. *
- * *
- ************************************************************************/
-
-typedef union ii_ilapr_u {
- u64 ii_ilapr_regval;
- struct {
- u64 i_region:64;
- } ii_ilapr_fld_s;
-} ii_ilapr_u_t;
-
-/************************************************************************
- * *
- * Description: A write to this register of the 64-bit value *
- * "SGIrules" in ASCII, will cause the bit in the ILAPR register *
- * corresponding to the region of the requestor to be set (allow *
- * access). A write of any other value will be ignored. Access *
- * protection for this register is "SGIrules". *
- * This register can also be accessed through the IAlias space. *
- * However, this access will not change the access permissions in the *
- * ILAPR. *
- * *
- ************************************************************************/
-
-typedef union ii_ilapo_u {
- u64 ii_ilapo_regval;
- struct {
- u64 i_io_ovrride:64;
- } ii_ilapo_fld_s;
-} ii_ilapo_u_t;
-
-/************************************************************************
- * *
- * This register qualifies all the PIO and Graphics writes launched *
- * from the SHUB towards a widget. *
- * *
- ************************************************************************/
-
-typedef union ii_iowa_u {
- u64 ii_iowa_regval;
- struct {
- u64 i_w0_oac:1;
- u64 i_rsvd_1:7;
- u64 i_wx_oac:8;
- u64 i_rsvd:48;
- } ii_iowa_fld_s;
-} ii_iowa_u_t;
-
-/************************************************************************
- * *
- * Description: This register qualifies all the requests launched *
- * from a widget towards the Shub. This register is intended to be *
- * used by software in case of misbehaving widgets. *
- * *
- * *
- ************************************************************************/
-
-typedef union ii_iiwa_u {
- u64 ii_iiwa_regval;
- struct {
- u64 i_w0_iac:1;
- u64 i_rsvd_1:7;
- u64 i_wx_iac:8;
- u64 i_rsvd:48;
- } ii_iiwa_fld_s;
-} ii_iiwa_u_t;
-
-/************************************************************************
- * *
- * Description: This register qualifies all the operations launched *
- * from a widget towards the SHub. It allows individual access *
- * control for up to 8 devices per widget. A device refers to *
- * individual DMA master hosted by a widget. *
- * The bits in each field of this register are cleared by the Shub *
- * upon detection of an error which requires the device to be *
- * disabled. These fields assume that 0=TNUM=7 (i.e., Bridge-centric *
- * Crosstalk). Whether or not a device has access rights to this *
- * Shub is determined by an AND of the device enable bit in the *
- * appropriate field of this register and the corresponding bit in *
- * the Wx_IAC field (for the widget which this device belongs to). *
- * The bits in this field are set by writing a 1 to them. Incoming *
- * replies from Crosstalk are not subject to this access control *
- * mechanism. *
- * *
- ************************************************************************/
-
-typedef union ii_iidem_u {
- u64 ii_iidem_regval;
- struct {
- u64 i_w8_dxs:8;
- u64 i_w9_dxs:8;
- u64 i_wa_dxs:8;
- u64 i_wb_dxs:8;
- u64 i_wc_dxs:8;
- u64 i_wd_dxs:8;
- u64 i_we_dxs:8;
- u64 i_wf_dxs:8;
- } ii_iidem_fld_s;
-} ii_iidem_u_t;
-
-/************************************************************************
- * *
- * This register contains the various programmable fields necessary *
- * for controlling and observing the LLP signals. *
- * *
- ************************************************************************/
-
-typedef union ii_ilcsr_u {
- u64 ii_ilcsr_regval;
- struct {
- u64 i_nullto:6;
- u64 i_rsvd_4:2;
- u64 i_wrmrst:1;
- u64 i_rsvd_3:1;
- u64 i_llp_en:1;
- u64 i_bm8:1;
- u64 i_llp_stat:2;
- u64 i_remote_power:1;
- u64 i_rsvd_2:1;
- u64 i_maxrtry:10;
- u64 i_d_avail_sel:2;
- u64 i_rsvd_1:4;
- u64 i_maxbrst:10;
- u64 i_rsvd:22;
-
- } ii_ilcsr_fld_s;
-} ii_ilcsr_u_t;
-
-/************************************************************************
- * *
- * This is simply a status registers that monitors the LLP error *
- * rate. *
- * *
- ************************************************************************/
-
-typedef union ii_illr_u {
- u64 ii_illr_regval;
- struct {
- u64 i_sn_cnt:16;
- u64 i_cb_cnt:16;
- u64 i_rsvd:32;
- } ii_illr_fld_s;
-} ii_illr_u_t;
-
-/************************************************************************
- * *
- * Description: All II-detected non-BTE error interrupts are *
- * specified via this register. *
- * NOTE: The PI interrupt register address is hardcoded in the II. If *
- * PI_ID==0, then the II sends an interrupt request (Duplonet PWRI *
- * packet) to address offset 0x0180_0090 within the local register *
- * address space of PI0 on the node specified by the NODE field. If *
- * PI_ID==1, then the II sends the interrupt request to address *
- * offset 0x01A0_0090 within the local register address space of PI1 *
- * on the node specified by the NODE field. *
- * *
- ************************************************************************/
-
-typedef union ii_iidsr_u {
- u64 ii_iidsr_regval;
- struct {
- u64 i_level:8;
- u64 i_pi_id:1;
- u64 i_node:11;
- u64 i_rsvd_3:4;
- u64 i_enable:1;
- u64 i_rsvd_2:3;
- u64 i_int_sent:2;
- u64 i_rsvd_1:2;
- u64 i_pi0_forward_int:1;
- u64 i_pi1_forward_int:1;
- u64 i_rsvd:30;
- } ii_iidsr_fld_s;
-} ii_iidsr_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this register. This register is used *
- * for matching up the incoming responses from the graphics widget to *
- * the processor that initiated the graphics operation. The *
- * write-responses are converted to graphics credits and returned to *
- * the processor so that the processor interface can manage the flow *
- * control. *
- * *
- ************************************************************************/
-
-typedef union ii_igfx0_u {
- u64 ii_igfx0_regval;
- struct {
- u64 i_w_num:4;
- u64 i_pi_id:1;
- u64 i_n_num:12;
- u64 i_p_num:1;
- u64 i_rsvd:46;
- } ii_igfx0_fld_s;
-} ii_igfx0_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this register. This register is used *
- * for matching up the incoming responses from the graphics widget to *
- * the processor that initiated the graphics operation. The *
- * write-responses are converted to graphics credits and returned to *
- * the processor so that the processor interface can manage the flow *
- * control. *
- * *
- ************************************************************************/
-
-typedef union ii_igfx1_u {
- u64 ii_igfx1_regval;
- struct {
- u64 i_w_num:4;
- u64 i_pi_id:1;
- u64 i_n_num:12;
- u64 i_p_num:1;
- u64 i_rsvd:46;
- } ii_igfx1_fld_s;
-} ii_igfx1_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this registers. These registers are *
- * used as scratch registers for software use. *
- * *
- ************************************************************************/
-
-typedef union ii_iscr0_u {
- u64 ii_iscr0_regval;
- struct {
- u64 i_scratch:64;
- } ii_iscr0_fld_s;
-} ii_iscr0_u_t;
-
-/************************************************************************
- * *
- * There are two instances of this registers. These registers are *
- * used as scratch registers for software use. *
- * *
- ************************************************************************/
-
-typedef union ii_iscr1_u {
- u64 ii_iscr1_regval;
- struct {
- u64 i_scratch:64;
- } ii_iscr1_fld_s;
-} ii_iscr1_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the SHub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte1_u {
- u64 ii_itte1_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte1_fld_s;
-} ii_itte1_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte2_u {
- u64 ii_itte2_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte2_fld_s;
-} ii_itte2_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the SHub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte3_u {
- u64 ii_itte3_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte3_fld_s;
-} ii_itte3_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a SHub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the SHub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the SHub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte4_u {
- u64 ii_itte4_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte4_fld_s;
-} ii_itte4_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a SHub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte5_u {
- u64 ii_itte5_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte5_fld_s;
-} ii_itte5_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the Shub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte6_u {
- u64 ii_itte6_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte6_fld_s;
-} ii_itte6_u_t;
-
-/************************************************************************
- * *
- * Description: There are seven instances of translation table entry *
- * registers. Each register maps a Shub Big Window to a 48-bit *
- * address on Crosstalk. *
- * For M-mode (128 nodes, 8 GBytes/node), SysAD[31:29] (Big Window *
- * number) are used to select one of these 7 registers. The Widget *
- * number field is then derived from the W_NUM field for synthesizing *
- * a Crosstalk packet. The 5 bits of OFFSET are concatenated with *
- * SysAD[28:0] to form Crosstalk[33:0]. The upper Crosstalk[47:34] *
- * are padded with zeros. Although the maximum Crosstalk space *
- * addressable by the Shub is thus the lower 16 GBytes per widget *
- * (M-mode), however only <SUP >7</SUP>/<SUB >32nds</SUB> of this *
- * space can be accessed. *
- * For the N-mode (256 nodes, 4 GBytes/node), SysAD[30:28] (Big *
- * Window number) are used to select one of these 7 registers. The *
- * Widget number field is then derived from the W_NUM field for *
- * synthesizing a Crosstalk packet. The 5 bits of OFFSET are *
- * concatenated with SysAD[27:0] to form Crosstalk[33:0]. The IOSP *
- * field is used as Crosstalk[47], and remainder of the Crosstalk *
- * address bits (Crosstalk[46:34]) are always zero. While the maximum *
- * Crosstalk space addressable by the SHub is thus the lower *
- * 8-GBytes per widget (N-mode), only <SUP >7</SUP>/<SUB >32nds</SUB> *
- * of this space can be accessed. *
- * *
- ************************************************************************/
-
-typedef union ii_itte7_u {
- u64 ii_itte7_regval;
- struct {
- u64 i_offset:5;
- u64 i_rsvd_1:3;
- u64 i_w_num:4;
- u64 i_iosp:1;
- u64 i_rsvd:51;
- } ii_itte7_fld_s;
-} ii_itte7_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprb0_u {
- u64 ii_iprb0_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprb0_fld_s;
-} ii_iprb0_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprb8_u {
- u64 ii_iprb8_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprb8_fld_s;
-} ii_iprb8_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprb9_u {
- u64 ii_iprb9_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprb9_fld_s;
-} ii_iprb9_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * *
- * *
- ************************************************************************/
-
-typedef union ii_iprba_u {
- u64 ii_iprba_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprba_fld_s;
-} ii_iprba_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbb_u {
- u64 ii_iprbb_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbb_fld_s;
-} ii_iprbb_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbc_u {
- u64 ii_iprbc_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbc_fld_s;
-} ii_iprbc_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbd_u {
- u64 ii_iprbd_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbd_fld_s;
-} ii_iprbd_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of SHub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbe_u {
- u64 ii_iprbe_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbe_fld_s;
-} ii_iprbe_u_t;
-
-/************************************************************************
- * *
- * Description: There are 9 instances of this register, one per *
- * actual widget in this implementation of Shub and Crossbow. *
- * Note: Crossbow only has ports for Widgets 8 through F, widget 0 *
- * refers to Crossbow's internal space. *
- * This register contains the state elements per widget that are *
- * necessary to manage the PIO flow control on Crosstalk and on the *
- * Router Network. See the PIO Flow Control chapter for a complete *
- * description of this register *
- * The SPUR_WR bit requires some explanation. When this register is *
- * written, the new value of the C field is captured in an internal *
- * register so the hardware can remember what the programmer wrote *
- * into the credit counter. The SPUR_WR bit sets whenever the C field *
- * increments above this stored value, which indicates that there *
- * have been more responses received than requests sent. The SPUR_WR *
- * bit cannot be cleared until a value is written to the IPRBx *
- * register; the write will correct the C field and capture its new *
- * value in the internal register. Even if IECLR[E_PRB_x] is set, the *
- * SPUR_WR bit will persist if IPRBx hasn't yet been written. *
- * . *
- * *
- ************************************************************************/
-
-typedef union ii_iprbf_u {
- u64 ii_iprbf_regval;
- struct {
- u64 i_c:8;
- u64 i_na:14;
- u64 i_rsvd_2:2;
- u64 i_nb:14;
- u64 i_rsvd_1:2;
- u64 i_m:2;
- u64 i_f:1;
- u64 i_of_cnt:5;
- u64 i_error:1;
- u64 i_rd_to:1;
- u64 i_spur_wr:1;
- u64 i_spur_rd:1;
- u64 i_rsvd:11;
- u64 i_mult_err:1;
- } ii_iprbe_fld_s;
-} ii_iprbf_u_t;
-
-/************************************************************************
- * *
- * This register specifies the timeout value to use for monitoring *
- * Crosstalk credits which are used outbound to Crosstalk. An *
- * internal counter called the Crosstalk Credit Timeout Counter *
- * increments every 128 II clocks. The counter starts counting *
- * anytime the credit count drops below a threshold, and resets to *
- * zero (stops counting) anytime the credit count is at or above the *
- * threshold. The threshold is 1 credit in direct connect mode and 2 *
- * in Crossbow connect mode. When the internal Crosstalk Credit *
- * Timeout Counter reaches the value programmed in this register, a *
- * Crosstalk Credit Timeout has occurred. The internal counter is not *
- * readable from software, and stops counting at its maximum value, *
- * so it cannot cause more than one interrupt. *
- * *
- ************************************************************************/
-
-typedef union ii_ixcc_u {
- u64 ii_ixcc_regval;
- struct {
- u64 i_time_out:26;
- u64 i_rsvd:38;
- } ii_ixcc_fld_s;
-} ii_ixcc_u_t;
-
-/************************************************************************
- * *
- * Description: This register qualifies all the PIO and DMA *
- * operations launched from widget 0 towards the SHub. In *
- * addition, it also qualifies accesses by the BTE streams. *
- * The bits in each field of this register are cleared by the SHub *
- * upon detection of an error which requires widget 0 or the BTE *
- * streams to be terminated. Whether or not widget x has access *
- * rights to this SHub is determined by an AND of the device *
- * enable bit in the appropriate field of this register and bit 0 in *
- * the Wx_IAC field. The bits in this field are set by writing a 1 to *
- * them. Incoming replies from Crosstalk are not subject to this *
- * access control mechanism. *
- * *
- ************************************************************************/
-
-typedef union ii_imem_u {
- u64 ii_imem_regval;
- struct {
- u64 i_w0_esd:1;
- u64 i_rsvd_3:3;
- u64 i_b0_esd:1;
- u64 i_rsvd_2:3;
- u64 i_b1_esd:1;
- u64 i_rsvd_1:3;
- u64 i_clr_precise:1;
- u64 i_rsvd:51;
- } ii_imem_fld_s;
-} ii_imem_u_t;
-
-/************************************************************************
- * *
- * Description: This register specifies the timeout value to use for *
- * monitoring Crosstalk tail flits coming into the Shub in the *
- * TAIL_TO field. An internal counter associated with this register *
- * is incremented every 128 II internal clocks (7 bits). The counter *
- * starts counting anytime a header micropacket is received and stops *
- * counting (and resets to zero) any time a micropacket with a Tail *
- * bit is received. Once the counter reaches the threshold value *
- * programmed in this register, it generates an interrupt to the *
- * processor that is programmed into the IIDSR. The counter saturates *
- * (does not roll over) at its maximum value, so it cannot cause *
- * another interrupt until after it is cleared. *
- * The register also contains the Read Response Timeout values. The *
- * Prescalar is 23 bits, and counts II clocks. An internal counter *
- * increments on every II clock and when it reaches the value in the *
- * Prescalar field, all IPRTE registers with their valid bits set *
- * have their Read Response timers bumped. Whenever any of them match *
- * the value in the RRSP_TO field, a Read Response Timeout has *
- * occurred, and error handling occurs as described in the Error *
- * Handling section of this document. *
- * *
- ************************************************************************/
-
-typedef union ii_ixtt_u {
- u64 ii_ixtt_regval;
- struct {
- u64 i_tail_to:26;
- u64 i_rsvd_1:6;
- u64 i_rrsp_ps:23;
- u64 i_rrsp_to:5;
- u64 i_rsvd:4;
- } ii_ixtt_fld_s;
-} ii_ixtt_u_t;
-
-/************************************************************************
- * *
- * Writing a 1 to the fields of this register clears the appropriate *
- * error bits in other areas of SHub. Note that when the *
- * E_PRB_x bits are used to clear error bits in PRB registers, *
- * SPUR_RD and SPUR_WR may persist, because they require additional *
- * action to clear them. See the IPRBx and IXSS Register *
- * specifications. *
- * *
- ************************************************************************/
-
-typedef union ii_ieclr_u {
- u64 ii_ieclr_regval;
- struct {
- u64 i_e_prb_0:1;
- u64 i_rsvd:7;
- u64 i_e_prb_8:1;
- u64 i_e_prb_9:1;
- u64 i_e_prb_a:1;
- u64 i_e_prb_b:1;
- u64 i_e_prb_c:1;
- u64 i_e_prb_d:1;
- u64 i_e_prb_e:1;
- u64 i_e_prb_f:1;
- u64 i_e_crazy:1;
- u64 i_e_bte_0:1;
- u64 i_e_bte_1:1;
- u64 i_reserved_1:10;
- u64 i_spur_rd_hdr:1;
- u64 i_cam_intr_to:1;
- u64 i_cam_overflow:1;
- u64 i_cam_read_miss:1;
- u64 i_ioq_rep_underflow:1;
- u64 i_ioq_req_underflow:1;
- u64 i_ioq_rep_overflow:1;
- u64 i_ioq_req_overflow:1;
- u64 i_iiq_rep_overflow:1;
- u64 i_iiq_req_overflow:1;
- u64 i_ii_xn_rep_cred_overflow:1;
- u64 i_ii_xn_req_cred_overflow:1;
- u64 i_ii_xn_invalid_cmd:1;
- u64 i_xn_ii_invalid_cmd:1;
- u64 i_reserved_2:21;
- } ii_ieclr_fld_s;
-} ii_ieclr_u_t;
-
-/************************************************************************
- * *
- * This register controls both BTEs. SOFT_RESET is intended for *
- * recovery after an error. COUNT controls the total number of CRBs *
- * that both BTEs (combined) can use, which affects total BTE *
- * bandwidth. *
- * *
- ************************************************************************/
-
-typedef union ii_ibcr_u {
- u64 ii_ibcr_regval;
- struct {
- u64 i_count:4;
- u64 i_rsvd_1:4;
- u64 i_soft_reset:1;
- u64 i_rsvd:55;
- } ii_ibcr_fld_s;
-} ii_ibcr_u_t;
-
-/************************************************************************
- * *
- * This register contains the header of a spurious read response *
- * received from Crosstalk. A spurious read response is defined as a *
- * read response received by II from a widget for which (1) the SIDN *
- * has a value between 1 and 7, inclusive (II never sends requests to *
- * these widgets (2) there is no valid IPRTE register which *
- * corresponds to the TNUM, or (3) the widget indicated in SIDN is *
- * not the same as the widget recorded in the IPRTE register *
- * referenced by the TNUM. If this condition is true, and if the *
- * IXSS[VALID] bit is clear, then the header of the spurious read *
- * response is capture in IXSM and IXSS, and IXSS[VALID] is set. The *
- * errant header is thereby captured, and no further spurious read *
- * respones are captured until IXSS[VALID] is cleared by setting the *
- * appropriate bit in IECLR. Every time a spurious read response is *
- * detected, the SPUR_RD bit of the PRB corresponding to the incoming *
- * message's SIDN field is set. This always happens, regardless of *
- * whether a header is captured. The programmer should check *
- * IXSM[SIDN] to determine which widget sent the spurious response, *
- * because there may be more than one SPUR_RD bit set in the PRB *
- * registers. The widget indicated by IXSM[SIDN] was the first *
- * spurious read response to be received since the last time *
- * IXSS[VALID] was clear. The SPUR_RD bit of the corresponding PRB *
- * will be set. Any SPUR_RD bits in any other PRB registers indicate *
- * spurious messages from other widets which were detected after the *
- * header was captured.. *
- * *
- ************************************************************************/
-
-typedef union ii_ixsm_u {
- u64 ii_ixsm_regval;
- struct {
- u64 i_byte_en:32;
- u64 i_reserved:1;
- u64 i_tag:3;
- u64 i_alt_pactyp:4;
- u64 i_bo:1;
- u64 i_error:1;
- u64 i_vbpm:1;
- u64 i_gbr:1;
- u64 i_ds:2;
- u64 i_ct:1;
- u64 i_tnum:5;
- u64 i_pactyp:4;
- u64 i_sidn:4;
- u64 i_didn:4;
- } ii_ixsm_fld_s;
-} ii_ixsm_u_t;
-
-/************************************************************************
- * *
- * This register contains the sideband bits of a spurious read *
- * response received from Crosstalk. *
- * *
- ************************************************************************/
-
-typedef union ii_ixss_u {
- u64 ii_ixss_regval;
- struct {
- u64 i_sideband:8;
- u64 i_rsvd:55;
- u64 i_valid:1;
- } ii_ixss_fld_s;
-} ii_ixss_u_t;
-
-/************************************************************************
- * *
- * This register enables software to access the II LLP's test port. *
- * Refer to the LLP 2.5 documentation for an explanation of the test *
- * port. Software can write to this register to program the values *
- * for the control fields (TestErrCapture, TestClear, TestFlit, *
- * TestMask and TestSeed). Similarly, software can read from this *
- * register to obtain the values of the test port's status outputs *
- * (TestCBerr, TestValid and TestData). *
- * *
- ************************************************************************/
-
-typedef union ii_ilct_u {
- u64 ii_ilct_regval;
- struct {
- u64 i_test_seed:20;
- u64 i_test_mask:8;
- u64 i_test_data:20;
- u64 i_test_valid:1;
- u64 i_test_cberr:1;
- u64 i_test_flit:3;
- u64 i_test_clear:1;
- u64 i_test_err_capture:1;
- u64 i_rsvd:9;
- } ii_ilct_fld_s;
-} ii_ilct_u_t;
-
-/************************************************************************
- * *
- * If the II detects an illegal incoming Duplonet packet (request or *
- * reply) when VALID==0 in the IIEPH1 register, then it saves the *
- * contents of the packet's header flit in the IIEPH1 and IIEPH2 *
- * registers, sets the VALID bit in IIEPH1, clears the OVERRUN bit, *
- * and assigns a value to the ERR_TYPE field which indicates the *
- * specific nature of the error. The II recognizes four different *
- * types of errors: short request packets (ERR_TYPE==2), short reply *
- * packets (ERR_TYPE==3), long request packets (ERR_TYPE==4) and long *
- * reply packets (ERR_TYPE==5). The encodings for these types of *
- * errors were chosen to be consistent with the same types of errors *
- * indicated by the ERR_TYPE field in the LB_ERROR_HDR1 register (in *
- * the LB unit). If the II detects an illegal incoming Duplonet *
- * packet when VALID==1 in the IIEPH1 register, then it merely sets *
- * the OVERRUN bit to indicate that a subsequent error has happened, *
- * and does nothing further. *
- * *
- ************************************************************************/
-
-typedef union ii_iieph1_u {
- u64 ii_iieph1_regval;
- struct {
- u64 i_command:7;
- u64 i_rsvd_5:1;
- u64 i_suppl:14;
- u64 i_rsvd_4:1;
- u64 i_source:14;
- u64 i_rsvd_3:1;
- u64 i_err_type:4;
- u64 i_rsvd_2:4;
- u64 i_overrun:1;
- u64 i_rsvd_1:3;
- u64 i_valid:1;
- u64 i_rsvd:13;
- } ii_iieph1_fld_s;
-} ii_iieph1_u_t;
-
-/************************************************************************
- * *
- * This register holds the Address field from the header flit of an *
- * incoming erroneous Duplonet packet, along with the tail bit which *
- * accompanied this header flit. This register is essentially an *
- * extension of IIEPH1. Two registers were necessary because the 64 *
- * bits available in only a single register were insufficient to *
- * capture the entire header flit of an erroneous packet. *
- * *
- ************************************************************************/
-
-typedef union ii_iieph2_u {
- u64 ii_iieph2_regval;
- struct {
- u64 i_rsvd_0:3;
- u64 i_address:47;
- u64 i_rsvd_1:10;
- u64 i_tail:1;
- u64 i_rsvd:3;
- } ii_iieph2_fld_s;
-} ii_iieph2_u_t;
-
-/******************************/
-
-/************************************************************************
- * *
- * This register's value is a bit vector that guards access from SXBs *
- * to local registers within the II as well as to external Crosstalk *
- * widgets *
- * *
- ************************************************************************/
-
-typedef union ii_islapr_u {
- u64 ii_islapr_regval;
- struct {
- u64 i_region:64;
- } ii_islapr_fld_s;
-} ii_islapr_u_t;
-
-/************************************************************************
- * *
- * A write to this register of the 56-bit value "Pup+Bun" will cause *
- * the bit in the ISLAPR register corresponding to the region of the *
- * requestor to be set (access allowed). (
- * *
- ************************************************************************/
-
-typedef union ii_islapo_u {
- u64 ii_islapo_regval;
- struct {
- u64 i_io_sbx_ovrride:56;
- u64 i_rsvd:8;
- } ii_islapo_fld_s;
-} ii_islapo_u_t;
-
-/************************************************************************
- * *
- * Determines how long the wrapper will wait aftr an interrupt is *
- * initially issued from the II before it times out the outstanding *
- * interrupt and drops it from the interrupt queue. *
- * *
- ************************************************************************/
-
-typedef union ii_iwi_u {
- u64 ii_iwi_regval;
- struct {
- u64 i_prescale:24;
- u64 i_rsvd:8;
- u64 i_timeout:8;
- u64 i_rsvd1:8;
- u64 i_intrpt_retry_period:8;
- u64 i_rsvd2:8;
- } ii_iwi_fld_s;
-} ii_iwi_u_t;
-
-/************************************************************************
- * *
- * Log errors which have occurred in the II wrapper. The errors are *
- * cleared by writing to the IECLR register. *
- * *
- ************************************************************************/
-
-typedef union ii_iwel_u {
- u64 ii_iwel_regval;
- struct {
- u64 i_intr_timed_out:1;
- u64 i_rsvd:7;
- u64 i_cam_overflow:1;
- u64 i_cam_read_miss:1;
- u64 i_rsvd1:2;
- u64 i_ioq_rep_underflow:1;
- u64 i_ioq_req_underflow:1;
- u64 i_ioq_rep_overflow:1;
- u64 i_ioq_req_overflow:1;
- u64 i_iiq_rep_overflow:1;
- u64 i_iiq_req_overflow:1;
- u64 i_rsvd2:6;
- u64 i_ii_xn_rep_cred_over_under:1;
- u64 i_ii_xn_req_cred_over_under:1;
- u64 i_rsvd3:6;
- u64 i_ii_xn_invalid_cmd:1;
- u64 i_xn_ii_invalid_cmd:1;
- u64 i_rsvd4:30;
- } ii_iwel_fld_s;
-} ii_iwel_u_t;
-
-/************************************************************************
- * *
- * Controls the II wrapper. *
- * *
- ************************************************************************/
-
-typedef union ii_iwc_u {
- u64 ii_iwc_regval;
- struct {
- u64 i_dma_byte_swap:1;
- u64 i_rsvd:3;
- u64 i_cam_read_lines_reset:1;
- u64 i_rsvd1:3;
- u64 i_ii_xn_cred_over_under_log:1;
- u64 i_rsvd2:19;
- u64 i_xn_rep_iq_depth:5;
- u64 i_rsvd3:3;
- u64 i_xn_req_iq_depth:5;
- u64 i_rsvd4:3;
- u64 i_iiq_depth:6;
- u64 i_rsvd5:12;
- u64 i_force_rep_cred:1;
- u64 i_force_req_cred:1;
- } ii_iwc_fld_s;
-} ii_iwc_u_t;
-
-/************************************************************************
- * *
- * Status in the II wrapper. *
- * *
- ************************************************************************/
-
-typedef union ii_iws_u {
- u64 ii_iws_regval;
- struct {
- u64 i_xn_rep_iq_credits:5;
- u64 i_rsvd:3;
- u64 i_xn_req_iq_credits:5;
- u64 i_rsvd1:51;
- } ii_iws_fld_s;
-} ii_iws_u_t;
-
-/************************************************************************
- * *
- * Masks errors in the IWEL register. *
- * *
- ************************************************************************/
-
-typedef union ii_iweim_u {
- u64 ii_iweim_regval;
- struct {
- u64 i_intr_timed_out:1;
- u64 i_rsvd:7;
- u64 i_cam_overflow:1;
- u64 i_cam_read_miss:1;
- u64 i_rsvd1:2;
- u64 i_ioq_rep_underflow:1;
- u64 i_ioq_req_underflow:1;
- u64 i_ioq_rep_overflow:1;
- u64 i_ioq_req_overflow:1;
- u64 i_iiq_rep_overflow:1;
- u64 i_iiq_req_overflow:1;
- u64 i_rsvd2:6;
- u64 i_ii_xn_rep_cred_overflow:1;
- u64 i_ii_xn_req_cred_overflow:1;
- u64 i_rsvd3:6;
- u64 i_ii_xn_invalid_cmd:1;
- u64 i_xn_ii_invalid_cmd:1;
- u64 i_rsvd4:30;
- } ii_iweim_fld_s;
-} ii_iweim_u_t;
-
-/************************************************************************
- * *
- * A write to this register causes a particular field in the *
- * corresponding widget's PRB entry to be adjusted up or down by 1. *
- * This counter should be used when recovering from error and reset *
- * conditions. Note that software would be capable of causing *
- * inadvertent overflow or underflow of these counters. *
- * *
- ************************************************************************/
-
-typedef union ii_ipca_u {
- u64 ii_ipca_regval;
- struct {
- u64 i_wid:4;
- u64 i_adjust:1;
- u64 i_rsvd_1:3;
- u64 i_field:2;
- u64 i_rsvd:54;
- } ii_ipca_fld_s;
-} ii_ipca_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte0a_u {
- u64 ii_iprte0a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte0a_fld_s;
-} ii_iprte0a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte1a_u {
- u64 ii_iprte1a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte1a_fld_s;
-} ii_iprte1a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte2a_u {
- u64 ii_iprte2a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte2a_fld_s;
-} ii_iprte2a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte3a_u {
- u64 ii_iprte3a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte3a_fld_s;
-} ii_iprte3a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte4a_u {
- u64 ii_iprte4a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte4a_fld_s;
-} ii_iprte4a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte5a_u {
- u64 ii_iprte5a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte5a_fld_s;
-} ii_iprte5a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte6a_u {
- u64 ii_iprte6a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprte6a_fld_s;
-} ii_iprte6a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte7a_u {
- u64 ii_iprte7a_regval;
- struct {
- u64 i_rsvd_1:54;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } ii_iprtea7_fld_s;
-} ii_iprte7a_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte0b_u {
- u64 ii_iprte0b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte0b_fld_s;
-} ii_iprte0b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte1b_u {
- u64 ii_iprte1b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte1b_fld_s;
-} ii_iprte1b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte2b_u {
- u64 ii_iprte2b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte2b_fld_s;
-} ii_iprte2b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte3b_u {
- u64 ii_iprte3b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte3b_fld_s;
-} ii_iprte3b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte4b_u {
- u64 ii_iprte4b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte4b_fld_s;
-} ii_iprte4b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte5b_u {
- u64 ii_iprte5b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte5b_fld_s;
-} ii_iprte5b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte6b_u {
- u64 ii_iprte6b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
-
- } ii_iprte6b_fld_s;
-} ii_iprte6b_u_t;
-
-/************************************************************************
- * *
- * There are 8 instances of this register. This register contains *
- * the information that the II has to remember once it has launched a *
- * PIO Read operation. The contents are used to form the correct *
- * Router Network packet and direct the Crosstalk reply to the *
- * appropriate processor. *
- * *
- ************************************************************************/
-
-typedef union ii_iprte7b_u {
- u64 ii_iprte7b_regval;
- struct {
- u64 i_rsvd_1:3;
- u64 i_address:47;
- u64 i_init:3;
- u64 i_source:11;
- } ii_iprte7b_fld_s;
-} ii_iprte7b_u_t;
-
-/************************************************************************
- * *
- * Description: SHub II contains a feature which did not exist in *
- * the Hub which automatically cleans up after a Read Response *
- * timeout, including deallocation of the IPRTE and recovery of IBuf *
- * space. The inclusion of this register in SHub is for backward *
- * compatibility *
- * A write to this register causes an entry from the table of *
- * outstanding PIO Read Requests to be freed and returned to the *
- * stack of free entries. This register is used in handling the *
- * timeout errors that result in a PIO Reply never returning from *
- * Crosstalk. *
- * Note that this register does not affect the contents of the IPRTE *
- * registers. The Valid bits in those registers have to be *
- * specifically turned off by software. *
- * *
- ************************************************************************/
-
-typedef union ii_ipdr_u {
- u64 ii_ipdr_regval;
- struct {
- u64 i_te:3;
- u64 i_rsvd_1:1;
- u64 i_pnd:1;
- u64 i_init_rpcnt:1;
- u64 i_rsvd:58;
- } ii_ipdr_fld_s;
-} ii_ipdr_u_t;
-
-/************************************************************************
- * *
- * A write to this register causes a CRB entry to be returned to the *
- * queue of free CRBs. The entry should have previously been cleared *
- * (mark bit) via backdoor access to the pertinent CRB entry. This *
- * register is used in the last step of handling the errors that are *
- * captured and marked in CRB entries. Briefly: 1) first error for *
- * DMA write from a particular device, and first error for a *
- * particular BTE stream, lead to a marked CRB entry, and processor *
- * interrupt, 2) software reads the error information captured in the *
- * CRB entry, and presumably takes some corrective action, 3) *
- * software clears the mark bit, and finally 4) software writes to *
- * the ICDR register to return the CRB entry to the list of free CRB *
- * entries. *
- * *
- ************************************************************************/
-
-typedef union ii_icdr_u {
- u64 ii_icdr_regval;
- struct {
- u64 i_crb_num:4;
- u64 i_pnd:1;
- u64 i_rsvd:59;
- } ii_icdr_fld_s;
-} ii_icdr_u_t;
-
-/************************************************************************
- * *
- * This register provides debug access to two FIFOs inside of II. *
- * Both IOQ_MAX* fields of this register contain the instantaneous *
- * depth (in units of the number of available entries) of the *
- * associated IOQ FIFO. A read of this register will return the *
- * number of free entries on each FIFO at the time of the read. So *
- * when a FIFO is idle, the associated field contains the maximum *
- * depth of the FIFO. This register is writable for debug reasons *
- * and is intended to be written with the maximum desired FIFO depth *
- * while the FIFO is idle. Software must assure that II is idle when *
- * this register is written. If there are any active entries in any *
- * of these FIFOs when this register is written, the results are *
- * undefined. *
- * *
- ************************************************************************/
-
-typedef union ii_ifdr_u {
- u64 ii_ifdr_regval;
- struct {
- u64 i_ioq_max_rq:7;
- u64 i_set_ioq_rq:1;
- u64 i_ioq_max_rp:7;
- u64 i_set_ioq_rp:1;
- u64 i_rsvd:48;
- } ii_ifdr_fld_s;
-} ii_ifdr_u_t;
-
-/************************************************************************
- * *
- * This register allows the II to become sluggish in removing *
- * messages from its inbound queue (IIQ). This will cause messages to *
- * back up in either virtual channel. Disabling the "molasses" mode *
- * subsequently allows the II to be tested under stress. In the *
- * sluggish ("Molasses") mode, the localized effects of congestion *
- * can be observed. *
- * *
- ************************************************************************/
-
-typedef union ii_iiap_u {
- u64 ii_iiap_regval;
- struct {
- u64 i_rq_mls:6;
- u64 i_rsvd_1:2;
- u64 i_rp_mls:6;
- u64 i_rsvd:50;
- } ii_iiap_fld_s;
-} ii_iiap_u_t;
-
-/************************************************************************
- * *
- * This register allows several parameters of CRB operation to be *
- * set. Note that writing to this register can have catastrophic side *
- * effects, if the CRB is not quiescent, i.e. if the CRB is *
- * processing protocol messages when the write occurs. *
- * *
- ************************************************************************/
-
-typedef union ii_icmr_u {
- u64 ii_icmr_regval;
- struct {
- u64 i_sp_msg:1;
- u64 i_rd_hdr:1;
- u64 i_rsvd_4:2;
- u64 i_c_cnt:4;
- u64 i_rsvd_3:4;
- u64 i_clr_rqpd:1;
- u64 i_clr_rppd:1;
- u64 i_rsvd_2:2;
- u64 i_fc_cnt:4;
- u64 i_crb_vld:15;
- u64 i_crb_mark:15;
- u64 i_rsvd_1:2;
- u64 i_precise:1;
- u64 i_rsvd:11;
- } ii_icmr_fld_s;
-} ii_icmr_u_t;
-
-/************************************************************************
- * *
- * This register allows control of the table portion of the CRB *
- * logic via software. Control operations from this register have *
- * priority over all incoming Crosstalk or BTE requests. *
- * *
- ************************************************************************/
-
-typedef union ii_iccr_u {
- u64 ii_iccr_regval;
- struct {
- u64 i_crb_num:4;
- u64 i_rsvd_1:4;
- u64 i_cmd:8;
- u64 i_pending:1;
- u64 i_rsvd:47;
- } ii_iccr_fld_s;
-} ii_iccr_u_t;
-
-/************************************************************************
- * *
- * This register allows the maximum timeout value to be programmed. *
- * *
- ************************************************************************/
-
-typedef union ii_icto_u {
- u64 ii_icto_regval;
- struct {
- u64 i_timeout:8;
- u64 i_rsvd:56;
- } ii_icto_fld_s;
-} ii_icto_u_t;
-
-/************************************************************************
- * *
- * This register allows the timeout prescalar to be programmed. An *
- * internal counter is associated with this register. When the *
- * internal counter reaches the value of the PRESCALE field, the *
- * timer registers in all valid CRBs are incremented (CRBx_D[TIMEOUT] *
- * field). The internal counter resets to zero, and then continues *
- * counting. *
- * *
- ************************************************************************/
-
-typedef union ii_ictp_u {
- u64 ii_ictp_regval;
- struct {
- u64 i_prescale:24;
- u64 i_rsvd:40;
- } ii_ictp_fld_s;
-} ii_ictp_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * The CRB Entry registers can be conceptualized as rows and columns *
- * (illustrated in the table above). Each row contains the 4 *
- * registers required for a single CRB Entry. The first doubleword *
- * (column) for each entry is labeled A, and the second doubleword *
- * (higher address) is labeled B, the third doubleword is labeled C, *
- * the fourth doubleword is labeled D and the fifth doubleword is *
- * labeled E. All CRB entries have their addresses on a quarter *
- * cacheline aligned boundary. *
- * Upon reset, only the following fields are initialized: valid *
- * (VLD), priority count, timeout, timeout valid, and context valid. *
- * All other bits should be cleared by software before use (after *
- * recovering any potential error state from before the reset). *
- * The following four tables summarize the format for the four *
- * registers that are used for each ICRB# Entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_a_u {
- u64 ii_icrb0_a_regval;
- struct {
- u64 ia_iow:1;
- u64 ia_vld:1;
- u64 ia_addr:47;
- u64 ia_tnum:5;
- u64 ia_sidn:4;
- u64 ia_rsvd:6;
- } ii_icrb0_a_fld_s;
-} ii_icrb0_a_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_b_u {
- u64 ii_icrb0_b_regval;
- struct {
- u64 ib_xt_err:1;
- u64 ib_mark:1;
- u64 ib_ln_uce:1;
- u64 ib_errcode:3;
- u64 ib_error:1;
- u64 ib_stall__bte_1:1;
- u64 ib_stall__bte_0:1;
- u64 ib_stall__intr:1;
- u64 ib_stall_ib:1;
- u64 ib_intvn:1;
- u64 ib_wb:1;
- u64 ib_hold:1;
- u64 ib_ack:1;
- u64 ib_resp:1;
- u64 ib_ack_cnt:11;
- u64 ib_rsvd:7;
- u64 ib_exc:5;
- u64 ib_init:3;
- u64 ib_imsg:8;
- u64 ib_imsgtype:2;
- u64 ib_use_old:1;
- u64 ib_rsvd_1:11;
- } ii_icrb0_b_fld_s;
-} ii_icrb0_b_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_c_u {
- u64 ii_icrb0_c_regval;
- struct {
- u64 ic_source:15;
- u64 ic_size:2;
- u64 ic_ct:1;
- u64 ic_bte_num:1;
- u64 ic_gbr:1;
- u64 ic_resprqd:1;
- u64 ic_bo:1;
- u64 ic_suppl:15;
- u64 ic_rsvd:27;
- } ii_icrb0_c_fld_s;
-} ii_icrb0_c_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_d_u {
- u64 ii_icrb0_d_regval;
- struct {
- u64 id_pa_be:43;
- u64 id_bte_op:1;
- u64 id_pr_psc:4;
- u64 id_pr_cnt:4;
- u64 id_sleep:1;
- u64 id_rsvd:11;
- } ii_icrb0_d_fld_s;
-} ii_icrb0_d_u_t;
-
-/************************************************************************
- * *
- * Description: There are 15 CRB Entries (ICRB0 to ICRBE) that are *
- * used for Crosstalk operations (both cacheline and partial *
- * operations) or BTE/IO. Because the CRB entries are very wide, five *
- * registers (_A to _E) are required to read and write each entry. *
- * *
- ************************************************************************/
-
-typedef union ii_icrb0_e_u {
- u64 ii_icrb0_e_regval;
- struct {
- u64 ie_timeout:8;
- u64 ie_context:15;
- u64 ie_rsvd:1;
- u64 ie_tvld:1;
- u64 ie_cvld:1;
- u64 ie_rsvd_0:38;
- } ii_icrb0_e_fld_s;
-} ii_icrb0_e_u_t;
-
-/************************************************************************
- * *
- * This register contains the lower 64 bits of the header of the *
- * spurious message captured by II. Valid when the SP_MSG bit in ICMR *
- * register is set. *
- * *
- ************************************************************************/
-
-typedef union ii_icsml_u {
- u64 ii_icsml_regval;
- struct {
- u64 i_tt_addr:47;
- u64 i_newsuppl_ex:14;
- u64 i_reserved:2;
- u64 i_overflow:1;
- } ii_icsml_fld_s;
-} ii_icsml_u_t;
-
-/************************************************************************
- * *
- * This register contains the middle 64 bits of the header of the *
- * spurious message captured by II. Valid when the SP_MSG bit in ICMR *
- * register is set. *
- * *
- ************************************************************************/
-
-typedef union ii_icsmm_u {
- u64 ii_icsmm_regval;
- struct {
- u64 i_tt_ack_cnt:11;
- u64 i_reserved:53;
- } ii_icsmm_fld_s;
-} ii_icsmm_u_t;
-
-/************************************************************************
- * *
- * This register contains the microscopic state, all the inputs to *
- * the protocol table, captured with the spurious message. Valid when *
- * the SP_MSG bit in the ICMR register is set. *
- * *
- ************************************************************************/
-
-typedef union ii_icsmh_u {
- u64 ii_icsmh_regval;
- struct {
- u64 i_tt_vld:1;
- u64 i_xerr:1;
- u64 i_ft_cwact_o:1;
- u64 i_ft_wact_o:1;
- u64 i_ft_active_o:1;
- u64 i_sync:1;
- u64 i_mnusg:1;
- u64 i_mnusz:1;
- u64 i_plusz:1;
- u64 i_plusg:1;
- u64 i_tt_exc:5;
- u64 i_tt_wb:1;
- u64 i_tt_hold:1;
- u64 i_tt_ack:1;
- u64 i_tt_resp:1;
- u64 i_tt_intvn:1;
- u64 i_g_stall_bte1:1;
- u64 i_g_stall_bte0:1;
- u64 i_g_stall_il:1;
- u64 i_g_stall_ib:1;
- u64 i_tt_imsg:8;
- u64 i_tt_imsgtype:2;
- u64 i_tt_use_old:1;
- u64 i_tt_respreqd:1;
- u64 i_tt_bte_num:1;
- u64 i_cbn:1;
- u64 i_match:1;
- u64 i_rpcnt_lt_34:1;
- u64 i_rpcnt_ge_34:1;
- u64 i_rpcnt_lt_18:1;
- u64 i_rpcnt_ge_18:1;
- u64 i_rpcnt_lt_2:1;
- u64 i_rpcnt_ge_2:1;
- u64 i_rqcnt_lt_18:1;
- u64 i_rqcnt_ge_18:1;
- u64 i_rqcnt_lt_2:1;
- u64 i_rqcnt_ge_2:1;
- u64 i_tt_device:7;
- u64 i_tt_init:3;
- u64 i_reserved:5;
- } ii_icsmh_fld_s;
-} ii_icsmh_u_t;
-
-/************************************************************************
- * *
- * The Shub DEBUG unit provides a 3-bit selection signal to the *
- * II core and a 3-bit selection signal to the fsbclk domain in the II *
- * wrapper. *
- * *
- ************************************************************************/
-
-typedef union ii_idbss_u {
- u64 ii_idbss_regval;
- struct {
- u64 i_iioclk_core_submenu:3;
- u64 i_rsvd:5;
- u64 i_fsbclk_wrapper_submenu:3;
- u64 i_rsvd_1:5;
- u64 i_iioclk_menu:5;
- u64 i_rsvd_2:43;
- } ii_idbss_fld_s;
-} ii_idbss_u_t;
-
-/************************************************************************
- * *
- * Description: This register is used to set up the length for a *
- * transfer and then to monitor the progress of that transfer. This *
- * register needs to be initialized before a transfer is started. A *
- * legitimate write to this register will set the Busy bit, clear the *
- * Error bit, and initialize the length to the value desired. *
- * While the transfer is in progress, hardware will decrement the *
- * length field with each successful block that is copied. Once the *
- * transfer completes, hardware will clear the Busy bit. The length *
- * field will also contain the number of cache lines left to be *
- * transferred. *
- * *
- ************************************************************************/
-
-typedef union ii_ibls0_u {
- u64 ii_ibls0_regval;
- struct {
- u64 i_length:16;
- u64 i_error:1;
- u64 i_rsvd_1:3;
- u64 i_busy:1;
- u64 i_rsvd:43;
- } ii_ibls0_fld_s;
-} ii_ibls0_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibsa0_u {
- u64 ii_ibsa0_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:42;
- u64 i_rsvd:15;
- } ii_ibsa0_fld_s;
-} ii_ibsa0_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibda0_u {
- u64 ii_ibda0_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:42;
- u64 i_rsvd:15;
- } ii_ibda0_fld_s;
-} ii_ibda0_u_t;
-
-/************************************************************************
- * *
- * Writing to this register sets up the attributes of the transfer *
- * and initiates the transfer operation. Reading this register has *
- * the side effect of terminating any transfer in progress. Note: *
- * stopping a transfer midstream could have an adverse impact on the *
- * other BTE. If a BTE stream has to be stopped (due to error *
- * handling for example), both BTE streams should be stopped and *
- * their transfers discarded. *
- * *
- ************************************************************************/
-
-typedef union ii_ibct0_u {
- u64 ii_ibct0_regval;
- struct {
- u64 i_zerofill:1;
- u64 i_rsvd_2:3;
- u64 i_notify:1;
- u64 i_rsvd_1:3;
- u64 i_poison:1;
- u64 i_rsvd:55;
- } ii_ibct0_fld_s;
-} ii_ibct0_u_t;
-
-/************************************************************************
- * *
- * This register contains the address to which the WINV is sent. *
- * This address has to be cache line aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibna0_u {
- u64 ii_ibna0_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:42;
- u64 i_rsvd:15;
- } ii_ibna0_fld_s;
-} ii_ibna0_u_t;
-
-/************************************************************************
- * *
- * This register contains the programmable level as well as the node *
- * ID and PI unit of the processor to which the interrupt will be *
- * sent. *
- * *
- ************************************************************************/
-
-typedef union ii_ibia0_u {
- u64 ii_ibia0_regval;
- struct {
- u64 i_rsvd_2:1;
- u64 i_node_id:11;
- u64 i_rsvd_1:4;
- u64 i_level:7;
- u64 i_rsvd:41;
- } ii_ibia0_fld_s;
-} ii_ibia0_u_t;
-
-/************************************************************************
- * *
- * Description: This register is used to set up the length for a *
- * transfer and then to monitor the progress of that transfer. This *
- * register needs to be initialized before a transfer is started. A *
- * legitimate write to this register will set the Busy bit, clear the *
- * Error bit, and initialize the length to the value desired. *
- * While the transfer is in progress, hardware will decrement the *
- * length field with each successful block that is copied. Once the *
- * transfer completes, hardware will clear the Busy bit. The length *
- * field will also contain the number of cache lines left to be *
- * transferred. *
- * *
- ************************************************************************/
-
-typedef union ii_ibls1_u {
- u64 ii_ibls1_regval;
- struct {
- u64 i_length:16;
- u64 i_error:1;
- u64 i_rsvd_1:3;
- u64 i_busy:1;
- u64 i_rsvd:43;
- } ii_ibls1_fld_s;
-} ii_ibls1_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibsa1_u {
- u64 ii_ibsa1_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:33;
- u64 i_rsvd:24;
- } ii_ibsa1_fld_s;
-} ii_ibsa1_u_t;
-
-/************************************************************************
- * *
- * This register should be loaded before a transfer is started. The *
- * address to be loaded in bits 39:0 is the 40-bit TRex+ physical *
- * address as described in Section 1.3, Figure2 and Figure3. Since *
- * the bottom 7 bits of the address are always taken to be zero, BTE *
- * transfers are always cacheline-aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibda1_u {
- u64 ii_ibda1_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:33;
- u64 i_rsvd:24;
- } ii_ibda1_fld_s;
-} ii_ibda1_u_t;
-
-/************************************************************************
- * *
- * Writing to this register sets up the attributes of the transfer *
- * and initiates the transfer operation. Reading this register has *
- * the side effect of terminating any transfer in progress. Note: *
- * stopping a transfer midstream could have an adverse impact on the *
- * other BTE. If a BTE stream has to be stopped (due to error *
- * handling for example), both BTE streams should be stopped and *
- * their transfers discarded. *
- * *
- ************************************************************************/
-
-typedef union ii_ibct1_u {
- u64 ii_ibct1_regval;
- struct {
- u64 i_zerofill:1;
- u64 i_rsvd_2:3;
- u64 i_notify:1;
- u64 i_rsvd_1:3;
- u64 i_poison:1;
- u64 i_rsvd:55;
- } ii_ibct1_fld_s;
-} ii_ibct1_u_t;
-
-/************************************************************************
- * *
- * This register contains the address to which the WINV is sent. *
- * This address has to be cache line aligned. *
- * *
- ************************************************************************/
-
-typedef union ii_ibna1_u {
- u64 ii_ibna1_regval;
- struct {
- u64 i_rsvd_1:7;
- u64 i_addr:33;
- u64 i_rsvd:24;
- } ii_ibna1_fld_s;
-} ii_ibna1_u_t;
-
-/************************************************************************
- * *
- * This register contains the programmable level as well as the node *
- * ID and PI unit of the processor to which the interrupt will be *
- * sent. *
- * *
- ************************************************************************/
-
-typedef union ii_ibia1_u {
- u64 ii_ibia1_regval;
- struct {
- u64 i_pi_id:1;
- u64 i_node_id:8;
- u64 i_rsvd_1:7;
- u64 i_level:7;
- u64 i_rsvd:41;
- } ii_ibia1_fld_s;
-} ii_ibia1_u_t;
-
-/************************************************************************
- * *
- * This register defines the resources that feed information into *
- * the two performance counters located in the IO Performance *
- * Profiling Register. There are 17 different quantities that can be *
- * measured. Given these 17 different options, the two performance *
- * counters have 15 of them in common; menu selections 0 through 0xE *
- * are identical for each performance counter. As for the other two *
- * options, one is available from one performance counter and the *
- * other is available from the other performance counter. Hence, the *
- * II supports all 17*16=272 possible combinations of quantities to *
- * measure. *
- * *
- ************************************************************************/
-
-typedef union ii_ipcr_u {
- u64 ii_ipcr_regval;
- struct {
- u64 i_ippr0_c:4;
- u64 i_ippr1_c:4;
- u64 i_icct:8;
- u64 i_rsvd:48;
- } ii_ipcr_fld_s;
-} ii_ipcr_u_t;
-
-/************************************************************************
- * *
- * *
- * *
- ************************************************************************/
-
-typedef union ii_ippr_u {
- u64 ii_ippr_regval;
- struct {
- u64 i_ippr0:32;
- u64 i_ippr1:32;
- } ii_ippr_fld_s;
-} ii_ippr_u_t;
-
-/************************************************************************
- * *
- * The following defines which were not formed into structures are *
- * probably identical to another register, and the name of the *
- * register is provided against each of these registers. This *
- * information needs to be checked carefully *
- * *
- * IIO_ICRB1_A IIO_ICRB0_A *
- * IIO_ICRB1_B IIO_ICRB0_B *
- * IIO_ICRB1_C IIO_ICRB0_C *
- * IIO_ICRB1_D IIO_ICRB0_D *
- * IIO_ICRB1_E IIO_ICRB0_E *
- * IIO_ICRB2_A IIO_ICRB0_A *
- * IIO_ICRB2_B IIO_ICRB0_B *
- * IIO_ICRB2_C IIO_ICRB0_C *
- * IIO_ICRB2_D IIO_ICRB0_D *
- * IIO_ICRB2_E IIO_ICRB0_E *
- * IIO_ICRB3_A IIO_ICRB0_A *
- * IIO_ICRB3_B IIO_ICRB0_B *
- * IIO_ICRB3_C IIO_ICRB0_C *
- * IIO_ICRB3_D IIO_ICRB0_D *
- * IIO_ICRB3_E IIO_ICRB0_E *
- * IIO_ICRB4_A IIO_ICRB0_A *
- * IIO_ICRB4_B IIO_ICRB0_B *
- * IIO_ICRB4_C IIO_ICRB0_C *
- * IIO_ICRB4_D IIO_ICRB0_D *
- * IIO_ICRB4_E IIO_ICRB0_E *
- * IIO_ICRB5_A IIO_ICRB0_A *
- * IIO_ICRB5_B IIO_ICRB0_B *
- * IIO_ICRB5_C IIO_ICRB0_C *
- * IIO_ICRB5_D IIO_ICRB0_D *
- * IIO_ICRB5_E IIO_ICRB0_E *
- * IIO_ICRB6_A IIO_ICRB0_A *
- * IIO_ICRB6_B IIO_ICRB0_B *
- * IIO_ICRB6_C IIO_ICRB0_C *
- * IIO_ICRB6_D IIO_ICRB0_D *
- * IIO_ICRB6_E IIO_ICRB0_E *
- * IIO_ICRB7_A IIO_ICRB0_A *
- * IIO_ICRB7_B IIO_ICRB0_B *
- * IIO_ICRB7_C IIO_ICRB0_C *
- * IIO_ICRB7_D IIO_ICRB0_D *
- * IIO_ICRB7_E IIO_ICRB0_E *
- * IIO_ICRB8_A IIO_ICRB0_A *
- * IIO_ICRB8_B IIO_ICRB0_B *
- * IIO_ICRB8_C IIO_ICRB0_C *
- * IIO_ICRB8_D IIO_ICRB0_D *
- * IIO_ICRB8_E IIO_ICRB0_E *
- * IIO_ICRB9_A IIO_ICRB0_A *
- * IIO_ICRB9_B IIO_ICRB0_B *
- * IIO_ICRB9_C IIO_ICRB0_C *
- * IIO_ICRB9_D IIO_ICRB0_D *
- * IIO_ICRB9_E IIO_ICRB0_E *
- * IIO_ICRBA_A IIO_ICRB0_A *
- * IIO_ICRBA_B IIO_ICRB0_B *
- * IIO_ICRBA_C IIO_ICRB0_C *
- * IIO_ICRBA_D IIO_ICRB0_D *
- * IIO_ICRBA_E IIO_ICRB0_E *
- * IIO_ICRBB_A IIO_ICRB0_A *
- * IIO_ICRBB_B IIO_ICRB0_B *
- * IIO_ICRBB_C IIO_ICRB0_C *
- * IIO_ICRBB_D IIO_ICRB0_D *
- * IIO_ICRBB_E IIO_ICRB0_E *
- * IIO_ICRBC_A IIO_ICRB0_A *
- * IIO_ICRBC_B IIO_ICRB0_B *
- * IIO_ICRBC_C IIO_ICRB0_C *
- * IIO_ICRBC_D IIO_ICRB0_D *
- * IIO_ICRBC_E IIO_ICRB0_E *
- * IIO_ICRBD_A IIO_ICRB0_A *
- * IIO_ICRBD_B IIO_ICRB0_B *
- * IIO_ICRBD_C IIO_ICRB0_C *
- * IIO_ICRBD_D IIO_ICRB0_D *
- * IIO_ICRBD_E IIO_ICRB0_E *
- * IIO_ICRBE_A IIO_ICRB0_A *
- * IIO_ICRBE_B IIO_ICRB0_B *
- * IIO_ICRBE_C IIO_ICRB0_C *
- * IIO_ICRBE_D IIO_ICRB0_D *
- * IIO_ICRBE_E IIO_ICRB0_E *
- * *
- ************************************************************************/
-
-/*
- * Slightly friendlier names for some common registers.
- */
-#define IIO_WIDGET IIO_WID /* Widget identification */
-#define IIO_WIDGET_STAT IIO_WSTAT /* Widget status register */
-#define IIO_WIDGET_CTRL IIO_WCR /* Widget control register */
-#define IIO_PROTECT IIO_ILAPR /* IO interface protection */
-#define IIO_PROTECT_OVRRD IIO_ILAPO /* IO protect override */
-#define IIO_OUTWIDGET_ACCESS IIO_IOWA /* Outbound widget access */
-#define IIO_INWIDGET_ACCESS IIO_IIWA /* Inbound widget access */
-#define IIO_INDEV_ERR_MASK IIO_IIDEM /* Inbound device error mask */
-#define IIO_LLP_CSR IIO_ILCSR /* LLP control and status */
-#define IIO_LLP_LOG IIO_ILLR /* LLP log */
-#define IIO_XTALKCC_TOUT IIO_IXCC /* Xtalk credit count timeout */
-#define IIO_XTALKTT_TOUT IIO_IXTT /* Xtalk tail timeout */
-#define IIO_IO_ERR_CLR IIO_IECLR /* IO error clear */
-#define IIO_IGFX_0 IIO_IGFX0
-#define IIO_IGFX_1 IIO_IGFX1
-#define IIO_IBCT_0 IIO_IBCT0
-#define IIO_IBCT_1 IIO_IBCT1
-#define IIO_IBLS_0 IIO_IBLS0
-#define IIO_IBLS_1 IIO_IBLS1
-#define IIO_IBSA_0 IIO_IBSA0
-#define IIO_IBSA_1 IIO_IBSA1
-#define IIO_IBDA_0 IIO_IBDA0
-#define IIO_IBDA_1 IIO_IBDA1
-#define IIO_IBNA_0 IIO_IBNA0
-#define IIO_IBNA_1 IIO_IBNA1
-#define IIO_IBIA_0 IIO_IBIA0
-#define IIO_IBIA_1 IIO_IBIA1
-#define IIO_IOPRB_0 IIO_IPRB0
-
-#define IIO_PRTE_A(_x) (IIO_IPRTE0_A + (8 * (_x)))
-#define IIO_PRTE_B(_x) (IIO_IPRTE0_B + (8 * (_x)))
-#define IIO_NUM_PRTES 8 /* Total number of PRB table entries */
-#define IIO_WIDPRTE_A(x) IIO_PRTE_A(((x) - 8)) /* widget ID to its PRTE num */
-#define IIO_WIDPRTE_B(x) IIO_PRTE_B(((x) - 8)) /* widget ID to its PRTE num */
-
-#define IIO_NUM_IPRBS 9
-
-#define IIO_LLP_CSR_IS_UP 0x00002000
-#define IIO_LLP_CSR_LLP_STAT_MASK 0x00003000
-#define IIO_LLP_CSR_LLP_STAT_SHFT 12
-
-#define IIO_LLP_CB_MAX 0xffff /* in ILLR CB_CNT, Max Check Bit errors */
-#define IIO_LLP_SN_MAX 0xffff /* in ILLR SN_CNT, Max Sequence Number errors */
-
-/* key to IIO_PROTECT_OVRRD */
-#define IIO_PROTECT_OVRRD_KEY 0x53474972756c6573ull /* "SGIrules" */
-
-/* BTE register names */
-#define IIO_BTE_STAT_0 IIO_IBLS_0 /* Also BTE length/status 0 */
-#define IIO_BTE_SRC_0 IIO_IBSA_0 /* Also BTE source address 0 */
-#define IIO_BTE_DEST_0 IIO_IBDA_0 /* Also BTE dest. address 0 */
-#define IIO_BTE_CTRL_0 IIO_IBCT_0 /* Also BTE control/terminate 0 */
-#define IIO_BTE_NOTIFY_0 IIO_IBNA_0 /* Also BTE notification 0 */
-#define IIO_BTE_INT_0 IIO_IBIA_0 /* Also BTE interrupt 0 */
-#define IIO_BTE_OFF_0 0 /* Base offset from BTE 0 regs. */
-#define IIO_BTE_OFF_1 (IIO_IBLS_1 - IIO_IBLS_0) /* Offset from base to BTE 1 */
-
-/* BTE register offsets from base */
-#define BTEOFF_STAT 0
-#define BTEOFF_SRC (IIO_BTE_SRC_0 - IIO_BTE_STAT_0)
-#define BTEOFF_DEST (IIO_BTE_DEST_0 - IIO_BTE_STAT_0)
-#define BTEOFF_CTRL (IIO_BTE_CTRL_0 - IIO_BTE_STAT_0)
-#define BTEOFF_NOTIFY (IIO_BTE_NOTIFY_0 - IIO_BTE_STAT_0)
-#define BTEOFF_INT (IIO_BTE_INT_0 - IIO_BTE_STAT_0)
-
-/* names used in shub diags */
-#define IIO_BASE_BTE0 IIO_IBLS_0
-#define IIO_BASE_BTE1 IIO_IBLS_1
-
-/*
- * Macro which takes the widget number, and returns the
- * IO PRB address of that widget.
- * value _x is expected to be a widget number in the range
- * 0, 8 - 0xF
- */
-#define IIO_IOPRB(_x) (IIO_IOPRB_0 + ( ( (_x) < HUB_WIDGET_ID_MIN ? \
- (_x) : \
- (_x) - (HUB_WIDGET_ID_MIN-1)) << 3) )
-
-/* GFX Flow Control Node/Widget Register */
-#define IIO_IGFX_W_NUM_BITS 4 /* size of widget num field */
-#define IIO_IGFX_W_NUM_MASK ((1<<IIO_IGFX_W_NUM_BITS)-1)
-#define IIO_IGFX_W_NUM_SHIFT 0
-#define IIO_IGFX_PI_NUM_BITS 1 /* size of PI num field */
-#define IIO_IGFX_PI_NUM_MASK ((1<<IIO_IGFX_PI_NUM_BITS)-1)
-#define IIO_IGFX_PI_NUM_SHIFT 4
-#define IIO_IGFX_N_NUM_BITS 8 /* size of node num field */
-#define IIO_IGFX_N_NUM_MASK ((1<<IIO_IGFX_N_NUM_BITS)-1)
-#define IIO_IGFX_N_NUM_SHIFT 5
-#define IIO_IGFX_P_NUM_BITS 1 /* size of processor num field */
-#define IIO_IGFX_P_NUM_MASK ((1<<IIO_IGFX_P_NUM_BITS)-1)
-#define IIO_IGFX_P_NUM_SHIFT 16
-#define IIO_IGFX_INIT(widget, pi, node, cpu) (\
- (((widget) & IIO_IGFX_W_NUM_MASK) << IIO_IGFX_W_NUM_SHIFT) | \
- (((pi) & IIO_IGFX_PI_NUM_MASK)<< IIO_IGFX_PI_NUM_SHIFT)| \
- (((node) & IIO_IGFX_N_NUM_MASK) << IIO_IGFX_N_NUM_SHIFT) | \
- (((cpu) & IIO_IGFX_P_NUM_MASK) << IIO_IGFX_P_NUM_SHIFT))
-
-/* Scratch registers (all bits available) */
-#define IIO_SCRATCH_REG0 IIO_ISCR0
-#define IIO_SCRATCH_REG1 IIO_ISCR1
-#define IIO_SCRATCH_MASK 0xffffffffffffffffUL
-
-#define IIO_SCRATCH_BIT0_0 0x0000000000000001UL
-#define IIO_SCRATCH_BIT0_1 0x0000000000000002UL
-#define IIO_SCRATCH_BIT0_2 0x0000000000000004UL
-#define IIO_SCRATCH_BIT0_3 0x0000000000000008UL
-#define IIO_SCRATCH_BIT0_4 0x0000000000000010UL
-#define IIO_SCRATCH_BIT0_5 0x0000000000000020UL
-#define IIO_SCRATCH_BIT0_6 0x0000000000000040UL
-#define IIO_SCRATCH_BIT0_7 0x0000000000000080UL
-#define IIO_SCRATCH_BIT0_8 0x0000000000000100UL
-#define IIO_SCRATCH_BIT0_9 0x0000000000000200UL
-#define IIO_SCRATCH_BIT0_A 0x0000000000000400UL
-
-#define IIO_SCRATCH_BIT1_0 0x0000000000000001UL
-#define IIO_SCRATCH_BIT1_1 0x0000000000000002UL
-/* IO Translation Table Entries */
-#define IIO_NUM_ITTES 7 /* ITTEs numbered 0..6 */
- /* Hw manuals number them 1..7! */
-/*
- * IIO_IMEM Register fields.
- */
-#define IIO_IMEM_W0ESD 0x1UL /* Widget 0 shut down due to error */
-#define IIO_IMEM_B0ESD (1UL << 4) /* BTE 0 shut down due to error */
-#define IIO_IMEM_B1ESD (1UL << 8) /* BTE 1 Shut down due to error */
-
-/*
- * As a permanent workaround for a bug in the PI side of the shub, we've
- * redefined big window 7 as small window 0.
- XXX does this still apply for SN1??
- */
-#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
-
-/*
- * Use the top big window as a surrogate for the first small window
- */
-#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW
-
-#define ILCSR_WARM_RESET 0x100
-
-/*
- * CRB manipulation macros
- * The CRB macros are slightly complicated, since there are up to
- * four registers associated with each CRB entry.
- */
-#define IIO_NUM_CRBS 15 /* Number of CRBs */
-#define IIO_NUM_PC_CRBS 4 /* Number of partial cache CRBs */
-#define IIO_ICRB_OFFSET 8
-#define IIO_ICRB_0 IIO_ICRB0_A
-#define IIO_ICRB_ADDR_SHFT 2 /* Shift to get proper address */
-/* XXX - This is now tuneable:
- #define IIO_FIRST_PC_ENTRY 12
- */
-
-#define IIO_ICRB_A(_x) ((u64)(IIO_ICRB_0 + (6 * IIO_ICRB_OFFSET * (_x))))
-#define IIO_ICRB_B(_x) ((u64)((char *)IIO_ICRB_A(_x) + 1*IIO_ICRB_OFFSET))
-#define IIO_ICRB_C(_x) ((u64)((char *)IIO_ICRB_A(_x) + 2*IIO_ICRB_OFFSET))
-#define IIO_ICRB_D(_x) ((u64)((char *)IIO_ICRB_A(_x) + 3*IIO_ICRB_OFFSET))
-#define IIO_ICRB_E(_x) ((u64)((char *)IIO_ICRB_A(_x) + 4*IIO_ICRB_OFFSET))
-
-#define TNUM_TO_WIDGET_DEV(_tnum) (_tnum & 0x7)
-
-/*
- * values for "ecode" field
- */
-#define IIO_ICRB_ECODE_DERR 0 /* Directory error due to IIO access */
-#define IIO_ICRB_ECODE_PERR 1 /* Poison error on IO access */
-#define IIO_ICRB_ECODE_WERR 2 /* Write error by IIO access
- * e.g. WINV to a Read only line. */
-#define IIO_ICRB_ECODE_AERR 3 /* Access error caused by IIO access */
-#define IIO_ICRB_ECODE_PWERR 4 /* Error on partial write */
-#define IIO_ICRB_ECODE_PRERR 5 /* Error on partial read */
-#define IIO_ICRB_ECODE_TOUT 6 /* CRB timeout before deallocating */
-#define IIO_ICRB_ECODE_XTERR 7 /* Incoming xtalk pkt had error bit */
-
-/*
- * Values for field imsgtype
- */
-#define IIO_ICRB_IMSGT_XTALK 0 /* Incoming message from Xtalk */
-#define IIO_ICRB_IMSGT_BTE 1 /* Incoming message from BTE */
-#define IIO_ICRB_IMSGT_SN1NET 2 /* Incoming message from SN1 net */
-#define IIO_ICRB_IMSGT_CRB 3 /* Incoming message from CRB ??? */
-
-/*
- * values for field initiator.
- */
-#define IIO_ICRB_INIT_XTALK 0 /* Message originated in xtalk */
-#define IIO_ICRB_INIT_BTE0 0x1 /* Message originated in BTE 0 */
-#define IIO_ICRB_INIT_SN1NET 0x2 /* Message originated in SN1net */
-#define IIO_ICRB_INIT_CRB 0x3 /* Message originated in CRB ? */
-#define IIO_ICRB_INIT_BTE1 0x5 /* MEssage originated in BTE 1 */
-
-/*
- * Number of credits Hub widget has while sending req/response to
- * xbow.
- * Value of 3 is required by Xbow 1.1
- * We may be able to increase this to 4 with Xbow 1.2.
- */
-#define HUBII_XBOW_CREDIT 3
-#define HUBII_XBOW_REV2_CREDIT 4
-
-/*
- * Number of credits that xtalk devices should use when communicating
- * with a SHub (depth of SHub's queue).
- */
-#define HUB_CREDIT 4
-
-/*
- * Some IIO_PRB fields
- */
-#define IIO_PRB_MULTI_ERR (1LL << 63)
-#define IIO_PRB_SPUR_RD (1LL << 51)
-#define IIO_PRB_SPUR_WR (1LL << 50)
-#define IIO_PRB_RD_TO (1LL << 49)
-#define IIO_PRB_ERROR (1LL << 48)
-
-/*************************************************************************
-
- Some of the IIO field masks and shifts are defined here.
- This is in order to maintain compatibility in SN0 and SN1 code
-
-**************************************************************************/
-
-/*
- * ICMR register fields
- * (Note: the IIO_ICMR_P_CNT and IIO_ICMR_PC_VLD from Hub are not
- * present in SHub)
- */
-
-#define IIO_ICMR_CRB_VLD_SHFT 20
-#define IIO_ICMR_CRB_VLD_MASK (0x7fffUL << IIO_ICMR_CRB_VLD_SHFT)
-
-#define IIO_ICMR_FC_CNT_SHFT 16
-#define IIO_ICMR_FC_CNT_MASK (0xf << IIO_ICMR_FC_CNT_SHFT)
-
-#define IIO_ICMR_C_CNT_SHFT 4
-#define IIO_ICMR_C_CNT_MASK (0xf << IIO_ICMR_C_CNT_SHFT)
-
-#define IIO_ICMR_PRECISE (1UL << 52)
-#define IIO_ICMR_CLR_RPPD (1UL << 13)
-#define IIO_ICMR_CLR_RQPD (1UL << 12)
-
-/*
- * IIO PIO Deallocation register field masks : (IIO_IPDR)
- XXX present but not needed in bedrock? See the manual.
- */
-#define IIO_IPDR_PND (1 << 4)
-
-/*
- * IIO CRB deallocation register field masks: (IIO_ICDR)
- */
-#define IIO_ICDR_PND (1 << 4)
-
-/*
- * IO BTE Length/Status (IIO_IBLS) register bit field definitions
- */
-#define IBLS_BUSY (0x1UL << 20)
-#define IBLS_ERROR_SHFT 16
-#define IBLS_ERROR (0x1UL << IBLS_ERROR_SHFT)
-#define IBLS_LENGTH_MASK 0xffff
-
-/*
- * IO BTE Control/Terminate register (IBCT) register bit field definitions
- */
-#define IBCT_POISON (0x1UL << 8)
-#define IBCT_NOTIFY (0x1UL << 4)
-#define IBCT_ZFIL_MODE (0x1UL << 0)
-
-/*
- * IIO Incoming Error Packet Header (IIO_IIEPH1/IIO_IIEPH2)
- */
-#define IIEPH1_VALID (1UL << 44)
-#define IIEPH1_OVERRUN (1UL << 40)
-#define IIEPH1_ERR_TYPE_SHFT 32
-#define IIEPH1_ERR_TYPE_MASK 0xf
-#define IIEPH1_SOURCE_SHFT 20
-#define IIEPH1_SOURCE_MASK 11
-#define IIEPH1_SUPPL_SHFT 8
-#define IIEPH1_SUPPL_MASK 11
-#define IIEPH1_CMD_SHFT 0
-#define IIEPH1_CMD_MASK 7
-
-#define IIEPH2_TAIL (1UL << 40)
-#define IIEPH2_ADDRESS_SHFT 0
-#define IIEPH2_ADDRESS_MASK 38
-
-#define IIEPH1_ERR_SHORT_REQ 2
-#define IIEPH1_ERR_SHORT_REPLY 3
-#define IIEPH1_ERR_LONG_REQ 4
-#define IIEPH1_ERR_LONG_REPLY 5
-
-/*
- * IO Error Clear register bit field definitions
- */
-#define IECLR_PI1_FWD_INT (1UL << 31) /* clear PI1_FORWARD_INT in iidsr */
-#define IECLR_PI0_FWD_INT (1UL << 30) /* clear PI0_FORWARD_INT in iidsr */
-#define IECLR_SPUR_RD_HDR (1UL << 29) /* clear valid bit in ixss reg */
-#define IECLR_BTE1 (1UL << 18) /* clear bte error 1 */
-#define IECLR_BTE0 (1UL << 17) /* clear bte error 0 */
-#define IECLR_CRAZY (1UL << 16) /* clear crazy bit in wstat reg */
-#define IECLR_PRB_F (1UL << 15) /* clear err bit in PRB_F reg */
-#define IECLR_PRB_E (1UL << 14) /* clear err bit in PRB_E reg */
-#define IECLR_PRB_D (1UL << 13) /* clear err bit in PRB_D reg */
-#define IECLR_PRB_C (1UL << 12) /* clear err bit in PRB_C reg */
-#define IECLR_PRB_B (1UL << 11) /* clear err bit in PRB_B reg */
-#define IECLR_PRB_A (1UL << 10) /* clear err bit in PRB_A reg */
-#define IECLR_PRB_9 (1UL << 9) /* clear err bit in PRB_9 reg */
-#define IECLR_PRB_8 (1UL << 8) /* clear err bit in PRB_8 reg */
-#define IECLR_PRB_0 (1UL << 0) /* clear err bit in PRB_0 reg */
-
-/*
- * IIO CRB control register Fields: IIO_ICCR
- */
-#define IIO_ICCR_PENDING 0x10000
-#define IIO_ICCR_CMD_MASK 0xFF
-#define IIO_ICCR_CMD_SHFT 7
-#define IIO_ICCR_CMD_NOP 0x0 /* No Op */
-#define IIO_ICCR_CMD_WAKE 0x100 /* Reactivate CRB entry and process */
-#define IIO_ICCR_CMD_TIMEOUT 0x200 /* Make CRB timeout & mark invalid */
-#define IIO_ICCR_CMD_EJECT 0x400 /* Contents of entry written to memory
- * via a WB
- */
-#define IIO_ICCR_CMD_FLUSH 0x800
-
-/*
- *
- * CRB Register description.
- *
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING * WARNING
- *
- * Many of the fields in CRB are status bits used by hardware
- * for implementation of the protocol. It's very dangerous to
- * mess around with the CRB registers.
- *
- * It's OK to read the CRB registers and try to make sense out of the
- * fields in CRB.
- *
- * Updating CRB requires all activities in Hub IIO to be quiesced.
- * otherwise, a write to CRB could corrupt other CRB entries.
- * CRBs are here only as a back door peek to shub IIO's status.
- * Quiescing implies no dmas no PIOs
- * either directly from the cpu or from sn0net.
- * this is not something that can be done easily. So, AVOID updating
- * CRBs.
- */
-
-/*
- * Easy access macros for CRBs, all 5 registers (A-E)
- */
-typedef ii_icrb0_a_u_t icrba_t;
-#define a_sidn ii_icrb0_a_fld_s.ia_sidn
-#define a_tnum ii_icrb0_a_fld_s.ia_tnum
-#define a_addr ii_icrb0_a_fld_s.ia_addr
-#define a_valid ii_icrb0_a_fld_s.ia_vld
-#define a_iow ii_icrb0_a_fld_s.ia_iow
-#define a_regvalue ii_icrb0_a_regval
-
-typedef ii_icrb0_b_u_t icrbb_t;
-#define b_use_old ii_icrb0_b_fld_s.ib_use_old
-#define b_imsgtype ii_icrb0_b_fld_s.ib_imsgtype
-#define b_imsg ii_icrb0_b_fld_s.ib_imsg
-#define b_initiator ii_icrb0_b_fld_s.ib_init
-#define b_exc ii_icrb0_b_fld_s.ib_exc
-#define b_ackcnt ii_icrb0_b_fld_s.ib_ack_cnt
-#define b_resp ii_icrb0_b_fld_s.ib_resp
-#define b_ack ii_icrb0_b_fld_s.ib_ack
-#define b_hold ii_icrb0_b_fld_s.ib_hold
-#define b_wb ii_icrb0_b_fld_s.ib_wb
-#define b_intvn ii_icrb0_b_fld_s.ib_intvn
-#define b_stall_ib ii_icrb0_b_fld_s.ib_stall_ib
-#define b_stall_int ii_icrb0_b_fld_s.ib_stall__intr
-#define b_stall_bte_0 ii_icrb0_b_fld_s.ib_stall__bte_0
-#define b_stall_bte_1 ii_icrb0_b_fld_s.ib_stall__bte_1
-#define b_error ii_icrb0_b_fld_s.ib_error
-#define b_ecode ii_icrb0_b_fld_s.ib_errcode
-#define b_lnetuce ii_icrb0_b_fld_s.ib_ln_uce
-#define b_mark ii_icrb0_b_fld_s.ib_mark
-#define b_xerr ii_icrb0_b_fld_s.ib_xt_err
-#define b_regvalue ii_icrb0_b_regval
-
-typedef ii_icrb0_c_u_t icrbc_t;
-#define c_suppl ii_icrb0_c_fld_s.ic_suppl
-#define c_barrop ii_icrb0_c_fld_s.ic_bo
-#define c_doresp ii_icrb0_c_fld_s.ic_resprqd
-#define c_gbr ii_icrb0_c_fld_s.ic_gbr
-#define c_btenum ii_icrb0_c_fld_s.ic_bte_num
-#define c_cohtrans ii_icrb0_c_fld_s.ic_ct
-#define c_xtsize ii_icrb0_c_fld_s.ic_size
-#define c_source ii_icrb0_c_fld_s.ic_source
-#define c_regvalue ii_icrb0_c_regval
-
-typedef ii_icrb0_d_u_t icrbd_t;
-#define d_sleep ii_icrb0_d_fld_s.id_sleep
-#define d_pricnt ii_icrb0_d_fld_s.id_pr_cnt
-#define d_pripsc ii_icrb0_d_fld_s.id_pr_psc
-#define d_bteop ii_icrb0_d_fld_s.id_bte_op
-#define d_bteaddr ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */
-#define d_benable ii_icrb0_d_fld_s.id_pa_be /* ic_pa_be fld has 2 names */
-#define d_regvalue ii_icrb0_d_regval
-
-typedef ii_icrb0_e_u_t icrbe_t;
-#define icrbe_ctxtvld ii_icrb0_e_fld_s.ie_cvld
-#define icrbe_toutvld ii_icrb0_e_fld_s.ie_tvld
-#define icrbe_context ii_icrb0_e_fld_s.ie_context
-#define icrbe_timeout ii_icrb0_e_fld_s.ie_timeout
-#define e_regvalue ii_icrb0_e_regval
-
-/* Number of widgets supported by shub */
-#define HUB_NUM_WIDGET 9
-#define HUB_WIDGET_ID_MIN 0x8
-#define HUB_WIDGET_ID_MAX 0xf
-
-#define HUB_WIDGET_PART_NUM 0xc120
-#define MAX_HUBS_PER_XBOW 2
-
-/* A few more #defines for backwards compatibility */
-#define iprb_t ii_iprb0_u_t
-#define iprb_regval ii_iprb0_regval
-#define iprb_mult_err ii_iprb0_fld_s.i_mult_err
-#define iprb_spur_rd ii_iprb0_fld_s.i_spur_rd
-#define iprb_spur_wr ii_iprb0_fld_s.i_spur_wr
-#define iprb_rd_to ii_iprb0_fld_s.i_rd_to
-#define iprb_ovflow ii_iprb0_fld_s.i_of_cnt
-#define iprb_error ii_iprb0_fld_s.i_error
-#define iprb_ff ii_iprb0_fld_s.i_f
-#define iprb_mode ii_iprb0_fld_s.i_m
-#define iprb_bnakctr ii_iprb0_fld_s.i_nb
-#define iprb_anakctr ii_iprb0_fld_s.i_na
-#define iprb_xtalkctr ii_iprb0_fld_s.i_c
-
-#define LNK_STAT_WORKING 0x2 /* LLP is working */
-
-#define IIO_WSTAT_ECRAZY (1ULL << 32) /* Hub gone crazy */
-#define IIO_WSTAT_TXRETRY (1ULL << 9) /* Hub Tx Retry timeout */
-#define IIO_WSTAT_TXRETRY_MASK 0x7F /* should be 0xFF?? */
-#define IIO_WSTAT_TXRETRY_SHFT 16
-#define IIO_WSTAT_TXRETRY_CNT(w) (((w) >> IIO_WSTAT_TXRETRY_SHFT) & \
- IIO_WSTAT_TXRETRY_MASK)
-
-/* Number of II perf. counters we can multiplex at once */
-
-#define IO_PERF_SETS 32
-
-/* Bit for the widget in inbound access register */
-#define IIO_IIWA_WIDGET(_w) ((u64)(1ULL << _w))
-/* Bit for the widget in outbound access register */
-#define IIO_IOWA_WIDGET(_w) ((u64)(1ULL << _w))
-
-/* NOTE: The following define assumes that we are going to get
- * widget numbers from 8 thru F and the device numbers within
- * widget from 0 thru 7.
- */
-#define IIO_IIDEM_WIDGETDEV_MASK(w, d) ((u64)(1ULL << (8 * ((w) - 8) + (d))))
-
-/* IO Interrupt Destination Register */
-#define IIO_IIDSR_SENT_SHIFT 28
-#define IIO_IIDSR_SENT_MASK 0x30000000
-#define IIO_IIDSR_ENB_SHIFT 24
-#define IIO_IIDSR_ENB_MASK 0x01000000
-#define IIO_IIDSR_NODE_SHIFT 9
-#define IIO_IIDSR_NODE_MASK 0x000ff700
-#define IIO_IIDSR_PI_ID_SHIFT 8
-#define IIO_IIDSR_PI_ID_MASK 0x00000100
-#define IIO_IIDSR_LVL_SHIFT 0
-#define IIO_IIDSR_LVL_MASK 0x000000ff
-
-/* Xtalk timeout threshold register (IIO_IXTT) */
-#define IXTT_RRSP_TO_SHFT 55 /* read response timeout */
-#define IXTT_RRSP_TO_MASK (0x1FULL << IXTT_RRSP_TO_SHFT)
-#define IXTT_RRSP_PS_SHFT 32 /* read responsed TO prescalar */
-#define IXTT_RRSP_PS_MASK (0x7FFFFFULL << IXTT_RRSP_PS_SHFT)
-#define IXTT_TAIL_TO_SHFT 0 /* tail timeout counter threshold */
-#define IXTT_TAIL_TO_MASK (0x3FFFFFFULL << IXTT_TAIL_TO_SHFT)
-
-/*
- * The IO LLP control status register and widget control register
- */
-
-typedef union hubii_wcr_u {
- u64 wcr_reg_value;
- struct {
- u64 wcr_widget_id:4, /* LLP crossbar credit */
- wcr_tag_mode:1, /* Tag mode */
- wcr_rsvd1:8, /* Reserved */
- wcr_xbar_crd:3, /* LLP crossbar credit */
- wcr_f_bad_pkt:1, /* Force bad llp pkt enable */
- wcr_dir_con:1, /* widget direct connect */
- wcr_e_thresh:5, /* elasticity threshold */
- wcr_rsvd:41; /* unused */
- } wcr_fields_s;
-} hubii_wcr_t;
-
-#define iwcr_dir_con wcr_fields_s.wcr_dir_con
-
-/* The structures below are defined to extract and modify the ii
-performance registers */
-
-/* io_perf_sel allows the caller to specify what tests will be
- performed */
-
-typedef union io_perf_sel {
- u64 perf_sel_reg;
- struct {
- u64 perf_ippr0:4, perf_ippr1:4, perf_icct:8, perf_rsvd:48;
- } perf_sel_bits;
-} io_perf_sel_t;
-
-/* io_perf_cnt is to extract the count from the shub registers. Due to
- hardware problems there is only one counter, not two. */
-
-typedef union io_perf_cnt {
- u64 perf_cnt;
- struct {
- u64 perf_cnt:20, perf_rsvd2:12, perf_rsvd1:32;
- } perf_cnt_bits;
-
-} io_perf_cnt_t;
-
-typedef union iprte_a {
- u64 entry;
- struct {
- u64 i_rsvd_1:3;
- u64 i_addr:38;
- u64 i_init:3;
- u64 i_source:8;
- u64 i_rsvd:2;
- u64 i_widget:4;
- u64 i_to_cnt:5;
- u64 i_vld:1;
- } iprte_fields;
-} iprte_a_t;
-
-#endif /* _ASM_IA64_SN_SHUBIO_H */
#ifndef _ASM_IA64_SN_SIMULATOR_H
#define _ASM_IA64_SN_SIMULATOR_H
-#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV)
+#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_UV)
#define SNMAGIC 0xaeeeeeee8badbeefL
#define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;})
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
- *
- * Data types used by the SN_SAL_HWPERF_OP SAL call for monitoring
- * SGI Altix node and router hardware
- *
- * Mark Goodwin <markgw@sgi.com> Mon Aug 30 12:23:46 EST 2004
- */
-
-#ifndef SN_HWPERF_H
-#define SN_HWPERF_H
-
-/*
- * object structure. SN_HWPERF_ENUM_OBJECTS and SN_HWPERF_GET_CPU_INFO
- * return an array of these. Do not change this without also
- * changing the corresponding SAL code.
- */
-#define SN_HWPERF_MAXSTRING 128
-struct sn_hwperf_object_info {
- u32 id;
- union {
- struct {
- u64 this_part:1;
- u64 is_shared:1;
- } fields;
- struct {
- u64 flags;
- u64 reserved;
- } b;
- } f;
- char name[SN_HWPERF_MAXSTRING];
- char location[SN_HWPERF_MAXSTRING];
- u32 ports;
-};
-
-#define sn_hwp_this_part f.fields.this_part
-#define sn_hwp_is_shared f.fields.is_shared
-#define sn_hwp_flags f.b.flags
-
-/* macros for object classification */
-#define SN_HWPERF_IS_NODE(x) ((x) && strstr((x)->name, "SHub"))
-#define SN_HWPERF_IS_NODE_SHUB2(x) ((x) && strstr((x)->name, "SHub 2."))
-#define SN_HWPERF_IS_IONODE(x) ((x) && strstr((x)->name, "TIO"))
-#define SN_HWPERF_IS_NL3ROUTER(x) ((x) && strstr((x)->name, "NL3Router"))
-#define SN_HWPERF_IS_NL4ROUTER(x) ((x) && strstr((x)->name, "NL4Router"))
-#define SN_HWPERF_IS_OLDROUTER(x) ((x) && strstr((x)->name, "Router"))
-#define SN_HWPERF_IS_ROUTER(x) (SN_HWPERF_IS_NL3ROUTER(x) || \
- SN_HWPERF_IS_NL4ROUTER(x) || \
- SN_HWPERF_IS_OLDROUTER(x))
-#define SN_HWPERF_FOREIGN(x) ((x) && !(x)->sn_hwp_this_part && !(x)->sn_hwp_is_shared)
-#define SN_HWPERF_SAME_OBJTYPE(x,y) ((SN_HWPERF_IS_NODE(x) && SN_HWPERF_IS_NODE(y)) ||\
- (SN_HWPERF_IS_IONODE(x) && SN_HWPERF_IS_IONODE(y)) ||\
- (SN_HWPERF_IS_ROUTER(x) && SN_HWPERF_IS_ROUTER(y)))
-
-/* numa port structure, SN_HWPERF_ENUM_PORTS returns an array of these */
-struct sn_hwperf_port_info {
- u32 port;
- u32 conn_id;
- u32 conn_port;
-};
-
-/* for HWPERF_{GET,SET}_MMRS */
-struct sn_hwperf_data {
- u64 addr;
- u64 data;
-};
-
-/* user ioctl() argument, see below */
-struct sn_hwperf_ioctl_args {
- u64 arg; /* argument, usually an object id */
- u64 sz; /* size of transfer */
- void *ptr; /* pointer to source/target */
- u32 v0; /* second return value */
-};
-
-/*
- * For SN_HWPERF_{GET,SET}_MMRS and SN_HWPERF_OBJECT_DISTANCE,
- * sn_hwperf_ioctl_args.arg can be used to specify a CPU on which
- * to call SAL, and whether to use an interprocessor interrupt
- * or task migration in order to do so. If the CPU specified is
- * SN_HWPERF_ARG_ANY_CPU, then the current CPU will be used.
- */
-#define SN_HWPERF_ARG_ANY_CPU 0x7fffffffUL
-#define SN_HWPERF_ARG_CPU_MASK 0x7fffffff00000000ULL
-#define SN_HWPERF_ARG_USE_IPI_MASK 0x8000000000000000ULL
-#define SN_HWPERF_ARG_OBJID_MASK 0x00000000ffffffffULL
-
-/*
- * ioctl requests on the "sn_hwperf" misc device that call SAL.
- */
-#define SN_HWPERF_OP_MEM_COPYIN 0x1000
-#define SN_HWPERF_OP_MEM_COPYOUT 0x2000
-#define SN_HWPERF_OP_MASK 0x0fff
-
-/*
- * Determine mem requirement.
- * arg don't care
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_GET_HEAPSIZE 1
-
-/*
- * Install mem for SAL drvr
- * arg don't care
- * sz sizeof buffer pointed to by p
- * p pointer to buffer for scratch area
- */
-#define SN_HWPERF_INSTALL_HEAP 2
-
-/*
- * Determine number of objects
- * arg don't care
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_OBJECT_COUNT (10|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Determine object "distance", relative to a cpu. This operation can
- * execute on a designated logical cpu number, using either an IPI or
- * via task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
- * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
- *
- * arg bitmap of IPI flag, cpu number and object id
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_OBJECT_DISTANCE (11|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Enumerate objects. Special case if sz == 8, returns the required
- * buffer size.
- * arg don't care
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_object_info
- */
-#define SN_HWPERF_ENUM_OBJECTS (12|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Enumerate NumaLink ports for an object. Special case if sz == 8,
- * returns the required buffer size.
- * arg object id
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_port_info
- */
-#define SN_HWPERF_ENUM_PORTS (13|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * SET/GET memory mapped registers. These operations can execute
- * on a designated logical cpu number, using either an IPI or via
- * task migration. If the cpu number is SN_HWPERF_ANY_CPU, then
- * the current CPU is used. See the SN_HWPERF_ARG_* macros above.
- *
- * arg bitmap of ipi flag, cpu number and object id
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_data
- */
-#define SN_HWPERF_SET_MMRS (14|SN_HWPERF_OP_MEM_COPYIN)
-#define SN_HWPERF_GET_MMRS (15|SN_HWPERF_OP_MEM_COPYOUT| \
- SN_HWPERF_OP_MEM_COPYIN)
-/*
- * Lock a shared object
- * arg object id
- * sz don't care
- * p don't care
- */
-#define SN_HWPERF_ACQUIRE 16
-
-/*
- * Unlock a shared object
- * arg object id
- * sz don't care
- * p don't care
- */
-#define SN_HWPERF_RELEASE 17
-
-/*
- * Break a lock on a shared object
- * arg object id
- * sz don't care
- * p don't care
- */
-#define SN_HWPERF_FORCE_RELEASE 18
-
-/*
- * ioctl requests on "sn_hwperf" that do not call SAL
- */
-
-/*
- * get cpu info as an array of hwperf_object_info_t.
- * id is logical CPU number, name is description, location
- * is geoid (e.g. 001c04#1c). Special case if sz == 8,
- * returns the required buffer size.
- *
- * arg don't care
- * sz sizeof buffer pointed to by p
- * p pointer to array of struct sn_hwperf_object_info
- */
-#define SN_HWPERF_GET_CPU_INFO (100|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given an object id, return it's node number (aka cnode).
- * arg object id
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_GET_OBJ_NODE (101|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given a node number (cnode), return it's nasid.
- * arg ordinal node number (aka cnodeid)
- * sz 8
- * p pointer to u64 integer
- */
-#define SN_HWPERF_GET_NODE_NASID (102|SN_HWPERF_OP_MEM_COPYOUT)
-
-/*
- * Given a node id, determine the id of the nearest node with CPUs
- * and the id of the nearest node that has memory. The argument
- * node would normally be a "headless" node, e.g. an "IO node".
- * Return 0 on success.
- */
-extern int sn_hwperf_get_nearest_node(cnodeid_t node,
- cnodeid_t *near_mem, cnodeid_t *near_cpu);
-
-/* return codes */
-#define SN_HWPERF_OP_OK 0
-#define SN_HWPERF_OP_NOMEM 1
-#define SN_HWPERF_OP_NO_PERM 2
-#define SN_HWPERF_OP_IO_ERROR 3
-#define SN_HWPERF_OP_BUSY 4
-#define SN_HWPERF_OP_RECONFIGURE 253
-#define SN_HWPERF_OP_INVAL 254
-
-int sn_topology_open(struct inode *inode, struct file *file);
-int sn_topology_release(struct inode *inode, struct file *file);
-#endif /* SN_HWPERF_H */
+++ /dev/null
-/*
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#ifndef _ASM_IA64_SN_SN_CPUID_H
-#define _ASM_IA64_SN_SN_CPUID_H
-
-#include <linux/smp.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/intrinsics.h>
-
-
-/*
- * Functions for converting between cpuids, nodeids and NASIDs.
- *
- * These are for SGI platforms only.
- *
- */
-
-
-
-
-/*
- * Definitions of terms (these definitions are for IA64 ONLY. Other architectures
- * use cpuid/cpunum quite defferently):
- *
- * CPUID - a number in range of 0..NR_CPUS-1 that uniquely identifies
- * the cpu. The value cpuid has no significance on IA64 other than
- * the boot cpu is 0.
- * smp_processor_id() returns the cpuid of the current cpu.
- *
- * CPU_PHYSICAL_ID (also known as HARD_PROCESSOR_ID)
- * This is the same as 31:24 of the processor LID register
- * hard_smp_processor_id()- cpu_physical_id of current processor
- * cpu_physical_id(cpuid) - convert a <cpuid> to a <physical_cpuid>
- * cpu_logical_id(phy_id) - convert a <physical_cpuid> to a <cpuid>
- * * not real efficient - don't use in perf critical code
- *
- * SLICE - a number in the range of 0 - 3 (typically) that represents the
- * cpu number on a brick.
- *
- * SUBNODE - (almost obsolete) the number of the FSB that a cpu is
- * connected to. This is also the same as the PI number. Usually 0 or 1.
- *
- * NOTE!!!: the value of the bits in the cpu physical id (SAPICid or LID) of a cpu has no
- * significance. The SAPIC id (LID) is a 16-bit cookie that has meaning only to the PROM.
- *
- *
- * The macros convert between cpu physical ids & slice/nasid/cnodeid.
- * These terms are described below:
- *
- *
- * Brick
- * ----- ----- ----- ----- CPU
- * | 0 | | 1 | | 0 | | 1 | SLICE
- * ----- ----- ----- -----
- * | | | |
- * | | | |
- * 0 | | 2 0 | | 2 FSB SLOT
- * ------- -------
- * | |
- * | |
- * | |
- * ------------ -------------
- * | | | |
- * | SHUB | | SHUB | NASID (0..MAX_NASIDS)
- * | |----- | | CNODEID (0..num_compact_nodes-1)
- * | | | |
- * | | | |
- * ------------ -------------
- * | |
- *
- *
- */
-
-#define get_node_number(addr) NASID_GET(addr)
-
-/*
- * NOTE: on non-MP systems, only cpuid 0 exists
- */
-
-extern short physical_node_map[]; /* indexed by nasid to get cnode */
-
-/*
- * Macros for retrieving info about current cpu
- */
-#define get_nasid() (sn_nodepda->phys_cpuid[smp_processor_id()].nasid)
-#define get_subnode() (sn_nodepda->phys_cpuid[smp_processor_id()].subnode)
-#define get_slice() (sn_nodepda->phys_cpuid[smp_processor_id()].slice)
-#define get_cnode() (sn_nodepda->phys_cpuid[smp_processor_id()].cnode)
-#define get_sapicid() ((ia64_getreg(_IA64_REG_CR_LID) >> 16) & 0xffff)
-
-/*
- * Macros for retrieving info about an arbitrary cpu
- * cpuid - logical cpu id
- */
-#define cpuid_to_nasid(cpuid) (sn_nodepda->phys_cpuid[cpuid].nasid)
-#define cpuid_to_subnode(cpuid) (sn_nodepda->phys_cpuid[cpuid].subnode)
-#define cpuid_to_slice(cpuid) (sn_nodepda->phys_cpuid[cpuid].slice)
-
-
-/*
- * Dont use the following in performance critical code. They require scans
- * of potentially large tables.
- */
-extern int nasid_slice_to_cpuid(int, int);
-
-/*
- * cnodeid_to_nasid - convert a cnodeid to a NASID
- */
-#define cnodeid_to_nasid(cnodeid) (sn_cnodeid_to_nasid[cnodeid])
-
-/*
- * nasid_to_cnodeid - convert a NASID to a cnodeid
- */
-#define nasid_to_cnodeid(nasid) (physical_node_map[nasid])
-
-/*
- * partition_coherence_id - get the coherence ID of the current partition
- */
-extern u8 sn_coherency_id;
-#define partition_coherence_id() (sn_coherency_id)
-
-#endif /* _ASM_IA64_SN_SN_CPUID_H */
-
+++ /dev/null
-#ifndef _ASM_IA64_SN_FEATURE_SETS_H
-#define _ASM_IA64_SN_FEATURE_SETS_H
-
-/*
- * SN PROM Features
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-/* --------------------- PROM Features -----------------------------*/
-extern int sn_prom_feature_available(int id);
-
-#define MAX_PROM_FEATURE_SETS 2
-
-/*
- * The following defines features that may or may not be supported by the
- * current PROM. The OS uses sn_prom_feature_available(feature) to test for
- * the presence of a PROM feature. Down rev (old) PROMs will always test
- * "false" for new features.
- *
- * Use:
- * if (sn_prom_feature_available(PRF_XXX))
- * ...
- */
-
-#define PRF_PAL_CACHE_FLUSH_SAFE 0
-#define PRF_DEVICE_FLUSH_LIST 1
-#define PRF_HOTPLUG_SUPPORT 2
-#define PRF_CPU_DISABLE_SUPPORT 3
-
-/* --------------------- OS Features -------------------------------*/
-
-/*
- * The following defines OS features that are optionally present in
- * the operating system.
- * During boot, PROM is notified of these features via a series of calls:
- *
- * ia64_sn_set_os_feature(feature1);
- *
- * Once enabled, a feature cannot be disabled.
- *
- * By default, features are disabled unless explicitly enabled.
- *
- * These defines must be kept in sync with the corresponding
- * PROM definitions in feature_sets.h.
- */
-#define OSF_MCA_SLV_TO_OS_INIT_SLV 0
-#define OSF_FEAT_LOG_SBES 1
-#define OSF_ACPI_ENABLE 2
-#define OSF_PCISEGMENT_ENABLE 3
-
-
-#endif /* _ASM_IA64_SN_FEATURE_SETS_H */
* Copyright (c) 2000-2006 Silicon Graphics, Inc. All rights reserved.
*/
-
+#include <linux/types.h>
#include <asm/sal.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/shub_mmr.h>
// SGI Specific Calls
-#define SN_SAL_POD_MODE 0x02000001
-#define SN_SAL_SYSTEM_RESET 0x02000002
-#define SN_SAL_PROBE 0x02000003
-#define SN_SAL_GET_MASTER_NASID 0x02000004
-#define SN_SAL_GET_KLCONFIG_ADDR 0x02000005
-#define SN_SAL_LOG_CE 0x02000006
-#define SN_SAL_REGISTER_CE 0x02000007
#define SN_SAL_GET_PARTITION_ADDR 0x02000009
-#define SN_SAL_XP_ADDR_REGION 0x0200000f
-#define SN_SAL_NO_FAULT_ZONE_VIRTUAL 0x02000010
-#define SN_SAL_NO_FAULT_ZONE_PHYSICAL 0x02000011
-#define SN_SAL_PRINT_ERROR 0x02000012
-#define SN_SAL_REGISTER_PMI_HANDLER 0x02000014
-#define SN_SAL_SET_ERROR_HANDLING_FEATURES 0x0200001a // reentrant
-#define SN_SAL_GET_FIT_COMPT 0x0200001b // reentrant
-#define SN_SAL_GET_SAPIC_INFO 0x0200001d
-#define SN_SAL_GET_SN_INFO 0x0200001e
-#define SN_SAL_CONSOLE_PUTC 0x02000021
-#define SN_SAL_CONSOLE_GETC 0x02000022
-#define SN_SAL_CONSOLE_PUTS 0x02000023
-#define SN_SAL_CONSOLE_GETS 0x02000024
-#define SN_SAL_CONSOLE_GETS_TIMEOUT 0x02000025
-#define SN_SAL_CONSOLE_POLL 0x02000026
-#define SN_SAL_CONSOLE_INTR 0x02000027
-#define SN_SAL_CONSOLE_PUTB 0x02000028
-#define SN_SAL_CONSOLE_XMIT_CHARS 0x0200002a
-#define SN_SAL_CONSOLE_READC 0x0200002b
-#define SN_SAL_SYSCTL_OP 0x02000030
-#define SN_SAL_SYSCTL_MODID_GET 0x02000031
-#define SN_SAL_SYSCTL_GET 0x02000032
-#define SN_SAL_SYSCTL_IOBRICK_MODULE_GET 0x02000033
-#define SN_SAL_SYSCTL_IO_PORTSPEED_GET 0x02000035
-#define SN_SAL_SYSCTL_SLAB_GET 0x02000036
-#define SN_SAL_BUS_CONFIG 0x02000037
-#define SN_SAL_SYS_SERIAL_GET 0x02000038
-#define SN_SAL_PARTITION_SERIAL_GET 0x02000039
-#define SN_SAL_SYSCTL_PARTITION_GET 0x0200003a
-#define SN_SAL_SYSTEM_POWER_DOWN 0x0200003b
-#define SN_SAL_GET_MASTER_BASEIO_NASID 0x0200003c
-#define SN_SAL_COHERENCE 0x0200003d
#define SN_SAL_MEMPROTECT 0x0200003e
-#define SN_SAL_SYSCTL_FRU_CAPTURE 0x0200003f
-
-#define SN_SAL_SYSCTL_IOBRICK_PCI_OP 0x02000042 // reentrant
-#define SN_SAL_IROUTER_OP 0x02000043
-#define SN_SAL_SYSCTL_EVENT 0x02000044
-#define SN_SAL_IOIF_INTERRUPT 0x0200004a
-#define SN_SAL_HWPERF_OP 0x02000050 // lock
-#define SN_SAL_IOIF_ERROR_INTERRUPT 0x02000051
-#define SN_SAL_IOIF_PCI_SAFE 0x02000052
-#define SN_SAL_IOIF_SLOT_ENABLE 0x02000053
-#define SN_SAL_IOIF_SLOT_DISABLE 0x02000054
-#define SN_SAL_IOIF_GET_HUBDEV_INFO 0x02000055
-#define SN_SAL_IOIF_GET_PCIBUS_INFO 0x02000056
-#define SN_SAL_IOIF_GET_PCIDEV_INFO 0x02000057
-#define SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST 0x02000058 // deprecated
-#define SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST 0x0200005a
-
-#define SN_SAL_IOIF_INIT 0x0200005f
-#define SN_SAL_HUB_ERROR_INTERRUPT 0x02000060
-#define SN_SAL_BTE_RECOVER 0x02000061
-#define SN_SAL_RESERVED_DO_NOT_USE 0x02000062
-#define SN_SAL_IOIF_GET_PCI_TOPOLOGY 0x02000064
-
-#define SN_SAL_GET_PROM_FEATURE_SET 0x02000065
-#define SN_SAL_SET_OS_FEATURE_SET 0x02000066
-#define SN_SAL_INJECT_ERROR 0x02000067
-#define SN_SAL_SET_CPU_NUMBER 0x02000068
-#define SN_SAL_KERNEL_LAUNCH_EVENT 0x02000069
#define SN_SAL_WATCHLIST_ALLOC 0x02000070
#define SN_SAL_WATCHLIST_FREE 0x02000071
-/*
- * Service-specific constants
- */
-
-/* Console interrupt manipulation */
- /* action codes */
-#define SAL_CONSOLE_INTR_OFF 0 /* turn the interrupt off */
-#define SAL_CONSOLE_INTR_ON 1 /* turn the interrupt on */
-#define SAL_CONSOLE_INTR_STATUS 2 /* retrieve the interrupt status */
- /* interrupt specification & status return codes */
-#define SAL_CONSOLE_INTR_XMIT 1 /* output interrupt */
-#define SAL_CONSOLE_INTR_RECV 2 /* input interrupt */
-
-/* interrupt handling */
-#define SAL_INTR_ALLOC 1
-#define SAL_INTR_FREE 2
-#define SAL_INTR_REDIRECT 3
-
-/*
- * operations available on the generic SN_SAL_SYSCTL_OP
- * runtime service
- */
-#define SAL_SYSCTL_OP_IOBOARD 0x0001 /* retrieve board type */
-#define SAL_SYSCTL_OP_TIO_JLCK_RST 0x0002 /* issue TIO clock reset */
-
-/*
- * IRouter (i.e. generalized system controller) operations
- */
-#define SAL_IROUTER_OPEN 0 /* open a subchannel */
-#define SAL_IROUTER_CLOSE 1 /* close a subchannel */
-#define SAL_IROUTER_SEND 2 /* send part of an IRouter packet */
-#define SAL_IROUTER_RECV 3 /* receive part of an IRouter packet */
-#define SAL_IROUTER_INTR_STATUS 4 /* check the interrupt status for
- * an open subchannel
- */
-#define SAL_IROUTER_INTR_ON 5 /* enable an interrupt */
-#define SAL_IROUTER_INTR_OFF 6 /* disable an interrupt */
-#define SAL_IROUTER_INIT 7 /* initialize IRouter driver */
-
-/* IRouter interrupt mask bits */
-#define SAL_IROUTER_INTR_XMIT SAL_CONSOLE_INTR_XMIT
-#define SAL_IROUTER_INTR_RECV SAL_CONSOLE_INTR_RECV
-
-/*
- * Error Handling Features
- */
-#define SAL_ERR_FEAT_MCA_SLV_TO_OS_INIT_SLV 0x1 // obsolete
-#define SAL_ERR_FEAT_LOG_SBES 0x2 // obsolete
-#define SAL_ERR_FEAT_MFR_OVERRIDE 0x4
-#define SAL_ERR_FEAT_SBE_THRESHOLD 0xffff0000
-
/*
* SAL Error Codes
*/
#define SN_SAL_FAKE_PROM 0x02009999
-/**
- * sn_sal_revision - get the SGI SAL revision number
- *
- * The SGI PROM stores its version in the sal_[ab]_rev_(major|minor).
- * This routine simply extracts the major and minor values and
- * presents them in a u32 format.
- *
- * For example, version 4.05 would be represented at 0x0405.
- */
-static inline u32
-sn_sal_rev(void)
-{
- struct ia64_sal_systab *systab = __va(efi.sal_systab);
-
- return (u32)(systab->sal_b_rev_major << 8 | systab->sal_b_rev_minor);
-}
-
-/*
- * Returns the master console nasid, if the call fails, return an illegal
- * value.
- */
-static inline u64
-ia64_sn_get_console_nasid(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_NASID, 0, 0, 0, 0, 0, 0, 0);
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- /* Master console nasid is in 'v0' */
- return ret_stuff.v0;
-}
-
-/*
- * Returns the master baseio nasid, if the call fails, return an illegal
- * value.
- */
-static inline u64
-ia64_sn_get_master_baseio_nasid(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL(ret_stuff, SN_SAL_GET_MASTER_BASEIO_NASID, 0, 0, 0, 0, 0, 0, 0);
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- /* Master baseio nasid is in 'v0' */
- return ret_stuff.v0;
-}
-
-static inline void *
-ia64_sn_get_klconfig_addr(nasid_t nasid)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL(ret_stuff, SN_SAL_GET_KLCONFIG_ADDR, (u64)nasid, 0, 0, 0, 0, 0, 0);
- return ret_stuff.v0 ? __va(ret_stuff.v0) : NULL;
-}
-
-/*
- * Returns the next console character.
- */
-static inline u64
-ia64_sn_console_getc(int *ch)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_GETC, 0, 0, 0, 0, 0, 0, 0);
-
- /* character is in 'v0' */
- *ch = (int)ret_stuff.v0;
-
- return ret_stuff.status;
-}
-
-/*
- * Read a character from the SAL console device, after a previous interrupt
- * or poll operation has given us to know that a character is available
- * to be read.
- */
-static inline u64
-ia64_sn_console_readc(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_READC, 0, 0, 0, 0, 0, 0, 0);
-
- /* character is in 'v0' */
- return ret_stuff.v0;
-}
-
-/*
- * Sends the given character to the console.
- */
-static inline u64
-ia64_sn_console_putc(char ch)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTC, (u64)ch, 0, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Sends the given buffer to the console.
- */
-static inline u64
-ia64_sn_console_putb(const char *buf, int len)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_PUTB, (u64)buf, (u64)len, 0, 0, 0, 0, 0);
-
- if ( ret_stuff.status == 0 ) {
- return ret_stuff.v0;
- }
- return (u64)0;
-}
-
-/*
- * Print a platform error record
- */
-static inline u64
-ia64_sn_plat_specific_err_print(int (*hook)(const char*, ...), char *rec)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_REENTRANT(ret_stuff, SN_SAL_PRINT_ERROR, (u64)hook, (u64)rec, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Check for Platform errors
- */
-static inline u64
-ia64_sn_plat_cpei_handler(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_LOG_CE, 0, 0, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Set Error Handling Features (Obsolete)
- */
-static inline u64
-ia64_sn_plat_set_error_handling_features(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_REENTRANT(ret_stuff, SN_SAL_SET_ERROR_HANDLING_FEATURES,
- SAL_ERR_FEAT_LOG_SBES,
- 0, 0, 0, 0, 0, 0);
-
- return ret_stuff.status;
-}
-
-/*
- * Checks for console input.
- */
-static inline u64
-ia64_sn_console_check(int *result)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_POLL, 0, 0, 0, 0, 0, 0, 0);
-
- /* result is in 'v0' */
- *result = (int)ret_stuff.v0;
-
- return ret_stuff.status;
-}
-
-/*
- * Checks console interrupt status
- */
-static inline u64
-ia64_sn_console_intr_status(void)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
- 0, SAL_CONSOLE_INTR_STATUS,
- 0, 0, 0, 0, 0);
-
- if (ret_stuff.status == 0) {
- return ret_stuff.v0;
- }
-
- return 0;
-}
-
-/*
- * Enable an interrupt on the SAL console device.
- */
-static inline void
-ia64_sn_console_intr_enable(u64 intr)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
- intr, SAL_CONSOLE_INTR_ON,
- 0, 0, 0, 0, 0);
-}
-
-/*
- * Disable an interrupt on the SAL console device.
- */
-static inline void
-ia64_sn_console_intr_disable(u64 intr)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_INTR,
- intr, SAL_CONSOLE_INTR_OFF,
- 0, 0, 0, 0, 0);
-}
-
-/*
- * Sends a character buffer to the console asynchronously.
- */
-static inline u64
-ia64_sn_console_xmit_chars(char *buf, int len)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_CONSOLE_XMIT_CHARS,
- (u64)buf, (u64)len,
- 0, 0, 0, 0, 0);
-
- if (ret_stuff.status == 0) {
- return ret_stuff.v0;
- }
-
- return 0;
-}
-
-/*
- * Returns the iobrick module Id
- */
-static inline u64
-ia64_sn_sysctl_iobrick_module_get(nasid_t nasid, int *result)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYSCTL_IOBRICK_MODULE_GET, nasid, 0, 0, 0, 0, 0, 0);
-
- /* result is in 'v0' */
- *result = (int)ret_stuff.v0;
-
- return ret_stuff.status;
-}
-
-/**
- * ia64_sn_pod_mode - call the SN_SAL_POD_MODE function
- *
- * SN_SAL_POD_MODE actually takes an argument, but it's always
- * 0 when we call it from the kernel, so we don't have to expose
- * it to the caller.
- */
-static inline u64
-ia64_sn_pod_mode(void)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL_REENTRANT(isrv, SN_SAL_POD_MODE, 0, 0, 0, 0, 0, 0, 0);
- if (isrv.status)
- return 0;
- return isrv.v0;
-}
-
-/**
- * ia64_sn_probe_mem - read from memory safely
- * @addr: address to probe
- * @size: number bytes to read (1,2,4,8)
- * @data_ptr: address to store value read by probe (-1 returned if probe fails)
- *
- * Call into the SAL to do a memory read. If the read generates a machine
- * check, this routine will recover gracefully and return -1 to the caller.
- * @addr is usually a kernel virtual address in uncached space (i.e. the
- * address starts with 0xc), but if called in physical mode, @addr should
- * be a physical address.
- *
- * Return values:
- * 0 - probe successful
- * 1 - probe failed (generated MCA)
- * 2 - Bad arg
- * <0 - PAL error
- */
-static inline u64
-ia64_sn_probe_mem(long addr, long size, void *data_ptr)
-{
- struct ia64_sal_retval isrv;
-
- SAL_CALL(isrv, SN_SAL_PROBE, addr, size, 0, 0, 0, 0, 0);
-
- if (data_ptr) {
- switch (size) {
- case 1:
- *((u8*)data_ptr) = (u8)isrv.v0;
- break;
- case 2:
- *((u16*)data_ptr) = (u16)isrv.v0;
- break;
- case 4:
- *((u32*)data_ptr) = (u32)isrv.v0;
- break;
- case 8:
- *((u64*)data_ptr) = (u64)isrv.v0;
- break;
- default:
- isrv.status = 2;
- }
- }
- return isrv.status;
-}
-
-/*
- * Retrieve the system serial number as an ASCII string.
- */
-static inline u64
-ia64_sn_sys_serial_get(char *buf)
-{
- struct ia64_sal_retval ret_stuff;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_SYS_SERIAL_GET, buf, 0, 0, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-extern char sn_system_serial_number_string[];
-extern u64 sn_partition_serial_number;
-
-static inline char *
-sn_system_serial_number(void) {
- if (sn_system_serial_number_string[0]) {
- return(sn_system_serial_number_string);
- } else {
- ia64_sn_sys_serial_get(sn_system_serial_number_string);
- return(sn_system_serial_number_string);
- }
-}
-
-
-/*
- * Returns a unique id number for this system and partition (suitable for
- * use with license managers), based in part on the system serial number.
- */
-static inline u64
-ia64_sn_partition_serial_get(void)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall_reentrant(&ret_stuff, SN_SAL_PARTITION_SERIAL_GET, 0,
- 0, 0, 0, 0, 0, 0);
- if (ret_stuff.status != 0)
- return 0;
- return ret_stuff.v0;
-}
-
-static inline u64
-sn_partition_serial_number_val(void) {
- if (unlikely(sn_partition_serial_number == 0)) {
- sn_partition_serial_number = ia64_sn_partition_serial_get();
- }
- return sn_partition_serial_number;
-}
-
-/*
- * Returns the partition id of the nasid passed in as an argument,
- * or INVALID_PARTID if the partition id cannot be retrieved.
- */
-static inline partid_t
-ia64_sn_sysctl_partition_get(nasid_t nasid)
-{
- struct ia64_sal_retval ret_stuff;
- SAL_CALL(ret_stuff, SN_SAL_SYSCTL_PARTITION_GET, nasid,
- 0, 0, 0, 0, 0, 0);
- if (ret_stuff.status != 0)
- return -1;
- return ((partid_t)ret_stuff.v0);
-}
-
/*
* Returns the physical address of the partition's reserved page through
* an iterative number of calls.
return rv.status;
}
-/*
- * Register or unregister a physical address range being referenced across
- * a partition boundary for which certain SAL errors should be scanned for,
- * cleaned up and ignored. This is of value for kernel partitioning code only.
- * Values for the operation argument:
- * 1 = register this address range with SAL
- * 0 = unregister this address range with SAL
- *
- * SAL maintains a reference count on an address range in case it is registered
- * multiple times.
- *
- * On success, returns the reference count of the address range after the SAL
- * call has performed the current registration/unregistration. Returns a
- * negative value if an error occurred.
- */
-static inline int
-sn_register_xp_addr_region(u64 paddr, u64 len, int operation)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall(&ret_stuff, SN_SAL_XP_ADDR_REGION, paddr, len,
- (u64)operation, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Register or unregister an instruction range for which SAL errors should
- * be ignored. If an error occurs while in the registered range, SAL jumps
- * to return_addr after ignoring the error. Values for the operation argument:
- * 1 = register this instruction range with SAL
- * 0 = unregister this instruction range with SAL
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_register_nofault_code(u64 start_addr, u64 end_addr, u64 return_addr,
- int virtual, int operation)
-{
- struct ia64_sal_retval ret_stuff;
- u64 call;
- if (virtual) {
- call = SN_SAL_NO_FAULT_ZONE_VIRTUAL;
- } else {
- call = SN_SAL_NO_FAULT_ZONE_PHYSICAL;
- }
- ia64_sal_oemcall(&ret_stuff, call, start_addr, end_addr, return_addr,
- (u64)1, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Register or unregister a function to handle a PMI received by a CPU.
- * Before calling the registered handler, SAL sets r1 to the value that
- * was passed in as the global_pointer.
- *
- * If the handler pointer is NULL, then the currently registered handler
- * will be unregistered.
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_register_pmi_handler(u64 handler, u64 global_pointer)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall(&ret_stuff, SN_SAL_REGISTER_PMI_HANDLER, handler,
- global_pointer, 0, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * Change or query the coherence domain for this partition. Each cpu-based
- * nasid is represented by a bit in an array of 64-bit words:
- * 0 = not in this partition's coherency domain
- * 1 = in this partition's coherency domain
- *
- * It is not possible for the local system's nasids to be removed from
- * the coherency domain. Purpose of the domain arguments:
- * new_domain = set the coherence domain to the given nasids
- * old_domain = return the current coherence domain
- *
- * Returns 0 on success, or a negative value if an error occurred.
- */
-static inline int
-sn_change_coherence(u64 *new_domain, u64 *old_domain)
-{
- struct ia64_sal_retval ret_stuff;
- ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_COHERENCE, (u64)new_domain,
- (u64)old_domain, 0, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
/*
* Change memory access protections for a physical address range.
* nasid_array is not used on Altix, but may be in future architectures.
#define SN_MEMPROT_ACCESS_CLASS_6 0x084080
#define SN_MEMPROT_ACCESS_CLASS_7 0x021080
-/*
- * Turns off system power.
- */
-static inline void
-ia64_sn_power_down(void)
-{
- struct ia64_sal_retval ret_stuff;
- SAL_CALL(ret_stuff, SN_SAL_SYSTEM_POWER_DOWN, 0, 0, 0, 0, 0, 0, 0);
- while(1)
- cpu_relax();
- /* never returns */
-}
-
-/**
- * ia64_sn_fru_capture - tell the system controller to capture hw state
- *
- * This routine will call the SAL which will tell the system controller(s)
- * to capture hw mmr information from each SHub in the system.
- */
-static inline u64
-ia64_sn_fru_capture(void)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL(isrv, SN_SAL_SYSCTL_FRU_CAPTURE, 0, 0, 0, 0, 0, 0, 0);
- if (isrv.status)
- return 0;
- return isrv.v0;
-}
-
-/*
- * Performs an operation on a PCI bus or slot -- power up, power down
- * or reset.
- */
-static inline u64
-ia64_sn_sysctl_iobrick_pci_op(nasid_t n, u64 connection_type,
- u64 bus, char slot,
- u64 action)
-{
- struct ia64_sal_retval rv = {0, 0, 0, 0};
-
- SAL_CALL_NOLOCK(rv, SN_SAL_SYSCTL_IOBRICK_PCI_OP, connection_type, n, action,
- bus, (u64) slot, 0, 0);
- if (rv.status)
- return rv.v0;
- return 0;
-}
-
-
-/*
- * Open a subchannel for sending arbitrary data to the system
- * controller network via the system controller device associated with
- * 'nasid'. Return the subchannel number or a negative error code.
- */
-static inline int
-ia64_sn_irtr_open(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_OPEN, nasid,
- 0, 0, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Close system controller subchannel 'subch' previously opened on 'nasid'.
- */
-static inline int
-ia64_sn_irtr_close(nasid_t nasid, int subch)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_CLOSE,
- (u64) nasid, (u64) subch, 0, 0, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Read data from system controller associated with 'nasid' on
- * subchannel 'subch'. The buffer to be filled is pointed to by
- * 'buf', and its capacity is in the integer pointed to by 'len'. The
- * referent of 'len' is set to the number of bytes read by the SAL
- * call. The return value is either SALRET_OK (for bytes read) or
- * SALRET_ERROR (for error or "no data available").
- */
-static inline int
-ia64_sn_irtr_recv(nasid_t nasid, int subch, char *buf, int *len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_RECV,
- (u64) nasid, (u64) subch, (u64) buf, (u64) len,
- 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Write data to the system controller network via the system
- * controller associated with 'nasid' on suchannel 'subch'. The
- * buffer to be written out is pointed to by 'buf', and 'len' is the
- * number of bytes to be written. The return value is either the
- * number of bytes written (which could be zero) or a negative error
- * code.
- */
-static inline int
-ia64_sn_irtr_send(nasid_t nasid, int subch, char *buf, int len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_SEND,
- (u64) nasid, (u64) subch, (u64) buf, (u64) len,
- 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Check whether any interrupts are pending for the system controller
- * associated with 'nasid' and its subchannel 'subch'. The return
- * value is a mask of pending interrupts (SAL_IROUTER_INTR_XMIT and/or
- * SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr(nasid_t nasid, int subch)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_STATUS,
- (u64) nasid, (u64) subch, 0, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Enable the interrupt indicated by the intr parameter (either
- * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr_enable(nasid_t nasid, int subch, u64 intr)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_ON,
- (u64) nasid, (u64) subch, intr, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Disable the interrupt indicated by the intr parameter (either
- * SAL_IROUTER_INTR_XMIT or SAL_IROUTER_INTR_RECV).
- */
-static inline int
-ia64_sn_irtr_intr_disable(nasid_t nasid, int subch, u64 intr)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INTR_OFF,
- (u64) nasid, (u64) subch, intr, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Set up a node as the point of contact for system controller
- * environmental event delivery.
- */
-static inline int
-ia64_sn_sysctl_event_init(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_EVENT, (u64) nasid,
- 0, 0, 0, 0, 0, 0);
- return (int) rv.v0;
-}
-
-/*
- * Ask the system controller on the specified nasid to reset
- * the CX corelet clock. Only valid on TIO nodes.
- */
-static inline int
-ia64_sn_sysctl_tio_clock_reset(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_TIO_JLCK_RST,
- nasid, 0, 0, 0, 0, 0);
- if (rv.status != 0)
- return (int)rv.status;
- if (rv.v0 != 0)
- return (int)rv.v0;
-
- return 0;
-}
-
-/*
- * Get the associated ioboard type for a given nasid.
- */
-static inline long
-ia64_sn_sysctl_ioboard_get(nasid_t nasid, u16 *ioboard)
-{
- struct ia64_sal_retval isrv;
- SAL_CALL_REENTRANT(isrv, SN_SAL_SYSCTL_OP, SAL_SYSCTL_OP_IOBOARD,
- nasid, 0, 0, 0, 0, 0);
- if (isrv.v0 != 0) {
- *ioboard = isrv.v0;
- return isrv.status;
- }
- if (isrv.v1 != 0) {
- *ioboard = isrv.v1;
- return isrv.status;
- }
-
- return isrv.status;
-}
-
-/**
- * ia64_sn_get_fit_compt - read a FIT entry from the PROM header
- * @nasid: NASID of node to read
- * @index: FIT entry index to be retrieved (0..n)
- * @fitentry: 16 byte buffer where FIT entry will be stored.
- * @banbuf: optional buffer for retrieving banner
- * @banlen: length of banner buffer
- *
- * Access to the physical PROM chips needs to be serialized since reads and
- * writes can't occur at the same time, so we need to call into the SAL when
- * we want to look at the FIT entries on the chips.
- *
- * Returns:
- * %SALRET_OK if ok
- * %SALRET_INVALID_ARG if index too big
- * %SALRET_NOT_IMPLEMENTED if running on older PROM
- * ??? if nasid invalid OR banner buffer not large enough
- */
-static inline int
-ia64_sn_get_fit_compt(u64 nasid, u64 index, void *fitentry, void *banbuf,
- u64 banlen)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_GET_FIT_COMPT, nasid, index, fitentry,
- banbuf, banlen, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Initialize the SAL components of the system controller
- * communication driver; specifically pass in a sizable buffer that
- * can be used for allocation of subchannel queues as new subchannels
- * are opened. "buf" points to the buffer, and "len" specifies its
- * length.
- */
-static inline int
-ia64_sn_irtr_init(nasid_t nasid, void *buf, int len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_REENTRANT(rv, SN_SAL_IROUTER_OP, SAL_IROUTER_INIT,
- (u64) nasid, (u64) buf, (u64) len, 0, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * Returns the nasid, subnode & slice corresponding to a SAPIC ID
- *
- * In:
- * arg0 - SN_SAL_GET_SAPIC_INFO
- * arg1 - sapicid (lid >> 16)
- * Out:
- * v0 - nasid
- * v1 - subnode
- * v2 - slice
- */
-static inline u64
-ia64_sn_get_sapic_info(int sapicid, int *nasid, int *subnode, int *slice)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SAPIC_INFO, sapicid, 0, 0, 0, 0, 0, 0);
-
-/***** BEGIN HACK - temp til old proms no longer supported ********/
- if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
- if (nasid) *nasid = sapicid & 0xfff;
- if (subnode) *subnode = (sapicid >> 13) & 1;
- if (slice) *slice = (sapicid >> 12) & 3;
- return 0;
- }
-/***** END HACK *******/
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- if (nasid) *nasid = (int) ret_stuff.v0;
- if (subnode) *subnode = (int) ret_stuff.v1;
- if (slice) *slice = (int) ret_stuff.v2;
- return 0;
-}
-
-/*
- * Returns information about the HUB/SHUB.
- * In:
- * arg0 - SN_SAL_GET_SN_INFO
- * arg1 - 0 (other values reserved for future use)
- * Out:
- * v0
- * [7:0] - shub type (0=shub1, 1=shub2)
- * [15:8] - Log2 max number of nodes in entire system (includes
- * C-bricks, I-bricks, etc)
- * [23:16] - Log2 of nodes per sharing domain
- * [31:24] - partition ID
- * [39:32] - coherency_id
- * [47:40] - regionsize
- * v1
- * [15:0] - nasid mask (ex., 0x7ff for 11 bit nasid)
- * [23:15] - bit position of low nasid bit
- */
-static inline u64
-ia64_sn_get_sn_info(int fc, u8 *shubtype, u16 *nasid_bitmask, u8 *nasid_shift,
- u8 *systemsize, u8 *sharing_domain_size, u8 *partid, u8 *coher, u8 *reg)
-{
- struct ia64_sal_retval ret_stuff;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- ret_stuff.v1 = 0;
- ret_stuff.v2 = 0;
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_GET_SN_INFO, fc, 0, 0, 0, 0, 0, 0);
-
-/***** BEGIN HACK - temp til old proms no longer supported ********/
- if (ret_stuff.status == SALRET_NOT_IMPLEMENTED) {
- int nasid = get_sapicid() & 0xfff;
-#define SH_SHUB_ID_NODES_PER_BIT_MASK 0x001f000000000000UL
-#define SH_SHUB_ID_NODES_PER_BIT_SHFT 48
- if (shubtype) *shubtype = 0;
- if (nasid_bitmask) *nasid_bitmask = 0x7ff;
- if (nasid_shift) *nasid_shift = 38;
- if (systemsize) *systemsize = 10;
- if (sharing_domain_size) *sharing_domain_size = 8;
- if (partid) *partid = ia64_sn_sysctl_partition_get(nasid);
- if (coher) *coher = nasid >> 9;
- if (reg) *reg = (HUB_L((u64 *) LOCAL_MMR_ADDR(SH1_SHUB_ID)) & SH_SHUB_ID_NODES_PER_BIT_MASK) >>
- SH_SHUB_ID_NODES_PER_BIT_SHFT;
- return 0;
- }
-/***** END HACK *******/
-
- if (ret_stuff.status < 0)
- return ret_stuff.status;
-
- if (shubtype) *shubtype = ret_stuff.v0 & 0xff;
- if (systemsize) *systemsize = (ret_stuff.v0 >> 8) & 0xff;
- if (sharing_domain_size) *sharing_domain_size = (ret_stuff.v0 >> 16) & 0xff;
- if (partid) *partid = (ret_stuff.v0 >> 24) & 0xff;
- if (coher) *coher = (ret_stuff.v0 >> 32) & 0xff;
- if (reg) *reg = (ret_stuff.v0 >> 40) & 0xff;
- if (nasid_bitmask) *nasid_bitmask = (ret_stuff.v1 & 0xffff);
- if (nasid_shift) *nasid_shift = (ret_stuff.v1 >> 16) & 0xff;
- return 0;
-}
-
-/*
- * This is the access point to the Altix PROM hardware performance
- * and status monitoring interface. For info on using this, see
- * arch/ia64/include/asm/sn/sn2/sn_hwperf.h
- */
-static inline int
-ia64_sn_hwperf_op(nasid_t nasid, u64 opcode, u64 a0, u64 a1, u64 a2,
- u64 a3, u64 a4, int *v0)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_HWPERF_OP, (u64)nasid,
- opcode, a0, a1, a2, a3, a4);
- if (v0)
- *v0 = (int) rv.v0;
- return (int) rv.status;
-}
-
-static inline int
-ia64_sn_ioif_get_pci_topology(u64 buf, u64 len)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_IOIF_GET_PCI_TOPOLOGY, buf, len, 0, 0, 0, 0, 0);
- return (int) rv.status;
-}
-
-/*
- * BTE error recovery is implemented in SAL
- */
-static inline int
-ia64_sn_bte_recovery(nasid_t nasid)
-{
- struct ia64_sal_retval rv;
-
- rv.status = 0;
- SAL_CALL_NOLOCK(rv, SN_SAL_BTE_RECOVER, (u64)nasid, 0, 0, 0, 0, 0, 0);
- if (rv.status == SALRET_NOT_IMPLEMENTED)
- return 0;
- return (int) rv.status;
-}
-
static inline int
ia64_sn_is_fake_prom(void)
{
return (rv.status == 0);
}
-static inline int
-ia64_sn_get_prom_feature_set(int set, unsigned long *feature_set)
-{
- struct ia64_sal_retval rv;
-
- SAL_CALL_NOLOCK(rv, SN_SAL_GET_PROM_FEATURE_SET, set, 0, 0, 0, 0, 0, 0);
- if (rv.status != 0)
- return rv.status;
- *feature_set = rv.v0;
- return 0;
-}
-
-static inline int
-ia64_sn_set_os_feature(int feature)
-{
- struct ia64_sal_retval rv;
-
- SAL_CALL_NOLOCK(rv, SN_SAL_SET_OS_FEATURE_SET, feature, 0, 0, 0, 0, 0, 0);
- return rv.status;
-}
-
-static inline int
-sn_inject_error(u64 paddr, u64 *data, u64 *ecc)
-{
- struct ia64_sal_retval ret_stuff;
-
- ia64_sal_oemcall_nolock(&ret_stuff, SN_SAL_INJECT_ERROR, paddr, (u64)data,
- (u64)ecc, 0, 0, 0, 0);
- return ret_stuff.status;
-}
-
-static inline int
-ia64_sn_set_cpu_number(int cpu)
-{
- struct ia64_sal_retval rv;
-
- SAL_CALL_NOLOCK(rv, SN_SAL_SET_CPU_NUMBER, cpu, 0, 0, 0, 0, 0, 0);
- return rv.status;
-}
-static inline int
-ia64_sn_kernel_launch_event(void)
-{
- struct ia64_sal_retval rv;
- SAL_CALL_NOLOCK(rv, SN_SAL_KERNEL_LAUNCH_EVENT, 0, 0, 0, 0, 0, 0, 0);
- return rv.status;
-}
-
union sn_watchlist_u {
u64 val;
struct {
+++ /dev/null
-#ifndef _ASM_IA64_SN_TIO_TIOCA_H
-#define _ASM_IA64_SN_TIO_TIOCA_H
-
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-
-#define TIOCA_PART_NUM 0xE020
-#define TIOCA_MFGR_NUM 0x24
-#define TIOCA_REV_A 0x1
-
-/*
- * Register layout for TIO:CA. See below for bitmasks for each register.
- */
-
-struct tioca {
- u64 ca_id; /* 0x000000 */
- u64 ca_control1; /* 0x000008 */
- u64 ca_control2; /* 0x000010 */
- u64 ca_status1; /* 0x000018 */
- u64 ca_status2; /* 0x000020 */
- u64 ca_gart_aperature; /* 0x000028 */
- u64 ca_gfx_detach; /* 0x000030 */
- u64 ca_inta_dest_addr; /* 0x000038 */
- u64 ca_intb_dest_addr; /* 0x000040 */
- u64 ca_err_int_dest_addr; /* 0x000048 */
- u64 ca_int_status; /* 0x000050 */
- u64 ca_int_status_alias; /* 0x000058 */
- u64 ca_mult_error; /* 0x000060 */
- u64 ca_mult_error_alias; /* 0x000068 */
- u64 ca_first_error; /* 0x000070 */
- u64 ca_int_mask; /* 0x000078 */
- u64 ca_crm_pkterr_type; /* 0x000080 */
- u64 ca_crm_pkterr_type_alias; /* 0x000088 */
- u64 ca_crm_ct_error_detail_1; /* 0x000090 */
- u64 ca_crm_ct_error_detail_2; /* 0x000098 */
- u64 ca_crm_tnumto; /* 0x0000A0 */
- u64 ca_gart_err; /* 0x0000A8 */
- u64 ca_pcierr_type; /* 0x0000B0 */
- u64 ca_pcierr_addr; /* 0x0000B8 */
-
- u64 ca_pad_0000C0[3]; /* 0x0000{C0..D0} */
-
- u64 ca_pci_rd_buf_flush; /* 0x0000D8 */
- u64 ca_pci_dma_addr_extn; /* 0x0000E0 */
- u64 ca_agp_dma_addr_extn; /* 0x0000E8 */
- u64 ca_force_inta; /* 0x0000F0 */
- u64 ca_force_intb; /* 0x0000F8 */
- u64 ca_debug_vector_sel; /* 0x000100 */
- u64 ca_debug_mux_core_sel; /* 0x000108 */
- u64 ca_debug_mux_pci_sel; /* 0x000110 */
- u64 ca_debug_domain_sel; /* 0x000118 */
-
- u64 ca_pad_000120[28]; /* 0x0001{20..F8} */
-
- u64 ca_gart_ptr_table; /* 0x200 */
- u64 ca_gart_tlb_addr[8]; /* 0x2{08..40} */
-};
-
-/*
- * Mask/shift definitions for TIO:CA registers. The convention here is
- * to mainly use the names as they appear in the "TIO AEGIS Programmers'
- * Reference" with a CA_ prefix added. Some exceptions were made to fix
- * duplicate field names or to generalize fields that are common to
- * different registers (ca_debug_mux_core_sel and ca_debug_mux_pci_sel for
- * example).
- *
- * Fields consisting of a single bit have a single #define have a single
- * macro declaration to mask the bit. Fields consisting of multiple bits
- * have two declarations: one to mask the proper bits in a register, and
- * a second with the suffix "_SHFT" to identify how far the mask needs to
- * be shifted right to get its base value.
- */
-
-/* ==== ca_control1 */
-#define CA_SYS_BIG_END (1ull << 0)
-#define CA_DMA_AGP_SWAP (1ull << 1)
-#define CA_DMA_PCI_SWAP (1ull << 2)
-#define CA_PIO_IO_SWAP (1ull << 3)
-#define CA_PIO_MEM_SWAP (1ull << 4)
-#define CA_GFX_WR_SWAP (1ull << 5)
-#define CA_AGP_FW_ENABLE (1ull << 6)
-#define CA_AGP_CAL_CYCLE (0x7ull << 7)
-#define CA_AGP_CAL_CYCLE_SHFT 7
-#define CA_AGP_CAL_PRSCL_BYP (1ull << 10)
-#define CA_AGP_INIT_CAL_ENB (1ull << 11)
-#define CA_INJ_ADDR_PERR (1ull << 12)
-#define CA_INJ_DATA_PERR (1ull << 13)
- /* bits 15:14 unused */
-#define CA_PCIM_IO_NBE_AD (0x7ull << 16)
-#define CA_PCIM_IO_NBE_AD_SHFT 16
-#define CA_PCIM_FAST_BTB_ENB (1ull << 19)
- /* bits 23:20 unused */
-#define CA_PIO_ADDR_OFFSET (0xffull << 24)
-#define CA_PIO_ADDR_OFFSET_SHFT 24
- /* bits 35:32 unused */
-#define CA_AGPDMA_OP_COMBDELAY (0x1full << 36)
-#define CA_AGPDMA_OP_COMBDELAY_SHFT 36
- /* bit 41 unused */
-#define CA_AGPDMA_OP_ENB_COMBDELAY (1ull << 42)
-#define CA_PCI_INT_LPCNT (0xffull << 44)
-#define CA_PCI_INT_LPCNT_SHFT 44
- /* bits 63:52 unused */
-
-/* ==== ca_control2 */
-#define CA_AGP_LATENCY_TO (0xffull << 0)
-#define CA_AGP_LATENCY_TO_SHFT 0
-#define CA_PCI_LATENCY_TO (0xffull << 8)
-#define CA_PCI_LATENCY_TO_SHFT 8
-#define CA_PCI_MAX_RETRY (0x3ffull << 16)
-#define CA_PCI_MAX_RETRY_SHFT 16
- /* bits 27:26 unused */
-#define CA_RT_INT_EN (0x3ull << 28)
-#define CA_RT_INT_EN_SHFT 28
-#define CA_MSI_INT_ENB (1ull << 30)
-#define CA_PCI_ARB_ERR_ENB (1ull << 31)
-#define CA_GART_MEM_PARAM (0x3ull << 32)
-#define CA_GART_MEM_PARAM_SHFT 32
-#define CA_GART_RD_PREFETCH_ENB (1ull << 34)
-#define CA_GART_WR_PREFETCH_ENB (1ull << 35)
-#define CA_GART_FLUSH_TLB (1ull << 36)
- /* bits 39:37 unused */
-#define CA_CRM_TNUMTO_PERIOD (0x1fffull << 40)
-#define CA_CRM_TNUMTO_PERIOD_SHFT 40
- /* bits 55:53 unused */
-#define CA_CRM_TNUMTO_ENB (1ull << 56)
-#define CA_CRM_PRESCALER_BYP (1ull << 57)
- /* bits 59:58 unused */
-#define CA_CRM_MAX_CREDIT (0x7ull << 60)
-#define CA_CRM_MAX_CREDIT_SHFT 60
- /* bit 63 unused */
-
-/* ==== ca_status1 */
-#define CA_CORELET_ID (0x3ull << 0)
-#define CA_CORELET_ID_SHFT 0
-#define CA_INTA_N (1ull << 2)
-#define CA_INTB_N (1ull << 3)
-#define CA_CRM_CREDIT_AVAIL (0x7ull << 4)
-#define CA_CRM_CREDIT_AVAIL_SHFT 4
- /* bit 7 unused */
-#define CA_CRM_SPACE_AVAIL (0x7full << 8)
-#define CA_CRM_SPACE_AVAIL_SHFT 8
- /* bit 15 unused */
-#define CA_GART_TLB_VAL (0xffull << 16)
-#define CA_GART_TLB_VAL_SHFT 16
- /* bits 63:24 unused */
-
-/* ==== ca_status2 */
-#define CA_GFX_CREDIT_AVAIL (0xffull << 0)
-#define CA_GFX_CREDIT_AVAIL_SHFT 0
-#define CA_GFX_OPQ_AVAIL (0xffull << 8)
-#define CA_GFX_OPQ_AVAIL_SHFT 8
-#define CA_GFX_WRBUFF_AVAIL (0xffull << 16)
-#define CA_GFX_WRBUFF_AVAIL_SHFT 16
-#define CA_ADMA_OPQ_AVAIL (0xffull << 24)
-#define CA_ADMA_OPQ_AVAIL_SHFT 24
-#define CA_ADMA_WRBUFF_AVAIL (0xffull << 32)
-#define CA_ADMA_WRBUFF_AVAIL_SHFT 32
-#define CA_ADMA_RDBUFF_AVAIL (0x7full << 40)
-#define CA_ADMA_RDBUFF_AVAIL_SHFT 40
-#define CA_PCI_PIO_OP_STAT (1ull << 47)
-#define CA_PDMA_OPQ_AVAIL (0xfull << 48)
-#define CA_PDMA_OPQ_AVAIL_SHFT 48
-#define CA_PDMA_WRBUFF_AVAIL (0xfull << 52)
-#define CA_PDMA_WRBUFF_AVAIL_SHFT 52
-#define CA_PDMA_RDBUFF_AVAIL (0x3ull << 56)
-#define CA_PDMA_RDBUFF_AVAIL_SHFT 56
- /* bits 63:58 unused */
-
-/* ==== ca_gart_aperature */
-#define CA_GART_AP_ENB_AGP (1ull << 0)
-#define CA_GART_PAGE_SIZE (1ull << 1)
-#define CA_GART_AP_ENB_PCI (1ull << 2)
- /* bits 11:3 unused */
-#define CA_GART_AP_SIZE (0x3ffull << 12)
-#define CA_GART_AP_SIZE_SHFT 12
-#define CA_GART_AP_BASE (0x3ffffffffffull << 22)
-#define CA_GART_AP_BASE_SHFT 22
-
-/* ==== ca_inta_dest_addr
- ==== ca_intb_dest_addr
- ==== ca_err_int_dest_addr */
- /* bits 2:0 unused */
-#define CA_INT_DEST_ADDR (0x7ffffffffffffull << 3)
-#define CA_INT_DEST_ADDR_SHFT 3
- /* bits 55:54 unused */
-#define CA_INT_DEST_VECT (0xffull << 56)
-#define CA_INT_DEST_VECT_SHFT 56
-
-/* ==== ca_int_status */
-/* ==== ca_int_status_alias */
-/* ==== ca_mult_error */
-/* ==== ca_mult_error_alias */
-/* ==== ca_first_error */
-/* ==== ca_int_mask */
-#define CA_PCI_ERR (1ull << 0)
- /* bits 3:1 unused */
-#define CA_GART_FETCH_ERR (1ull << 4)
-#define CA_GFX_WR_OVFLW (1ull << 5)
-#define CA_PIO_REQ_OVFLW (1ull << 6)
-#define CA_CRM_PKTERR (1ull << 7)
-#define CA_CRM_DVERR (1ull << 8)
-#define CA_TNUMTO (1ull << 9)
-#define CA_CXM_RSP_CRED_OVFLW (1ull << 10)
-#define CA_CXM_REQ_CRED_OVFLW (1ull << 11)
-#define CA_PIO_INVALID_ADDR (1ull << 12)
-#define CA_PCI_ARB_TO (1ull << 13)
-#define CA_AGP_REQ_OFLOW (1ull << 14)
-#define CA_SBA_TYPE1_ERR (1ull << 15)
- /* bit 16 unused */
-#define CA_INTA (1ull << 17)
-#define CA_INTB (1ull << 18)
-#define CA_MULT_INTA (1ull << 19)
-#define CA_MULT_INTB (1ull << 20)
-#define CA_GFX_CREDIT_OVFLW (1ull << 21)
- /* bits 63:22 unused */
-
-/* ==== ca_crm_pkterr_type */
-/* ==== ca_crm_pkterr_type_alias */
-#define CA_CRM_PKTERR_SBERR_HDR (1ull << 0)
-#define CA_CRM_PKTERR_DIDN (1ull << 1)
-#define CA_CRM_PKTERR_PACTYPE (1ull << 2)
-#define CA_CRM_PKTERR_INV_TNUM (1ull << 3)
-#define CA_CRM_PKTERR_ADDR_RNG (1ull << 4)
-#define CA_CRM_PKTERR_ADDR_ALGN (1ull << 5)
-#define CA_CRM_PKTERR_HDR_PARAM (1ull << 6)
-#define CA_CRM_PKTERR_CW_ERR (1ull << 7)
-#define CA_CRM_PKTERR_SBERR_NH (1ull << 8)
-#define CA_CRM_PKTERR_EARLY_TERM (1ull << 9)
-#define CA_CRM_PKTERR_EARLY_TAIL (1ull << 10)
-#define CA_CRM_PKTERR_MSSNG_TAIL (1ull << 11)
-#define CA_CRM_PKTERR_MSSNG_HDR (1ull << 12)
- /* bits 15:13 unused */
-#define CA_FIRST_CRM_PKTERR_SBERR_HDR (1ull << 16)
-#define CA_FIRST_CRM_PKTERR_DIDN (1ull << 17)
-#define CA_FIRST_CRM_PKTERR_PACTYPE (1ull << 18)
-#define CA_FIRST_CRM_PKTERR_INV_TNUM (1ull << 19)
-#define CA_FIRST_CRM_PKTERR_ADDR_RNG (1ull << 20)
-#define CA_FIRST_CRM_PKTERR_ADDR_ALGN (1ull << 21)
-#define CA_FIRST_CRM_PKTERR_HDR_PARAM (1ull << 22)
-#define CA_FIRST_CRM_PKTERR_CW_ERR (1ull << 23)
-#define CA_FIRST_CRM_PKTERR_SBERR_NH (1ull << 24)
-#define CA_FIRST_CRM_PKTERR_EARLY_TERM (1ull << 25)
-#define CA_FIRST_CRM_PKTERR_EARLY_TAIL (1ull << 26)
-#define CA_FIRST_CRM_PKTERR_MSSNG_TAIL (1ull << 27)
-#define CA_FIRST_CRM_PKTERR_MSSNG_HDR (1ull << 28)
- /* bits 63:29 unused */
-
-/* ==== ca_crm_ct_error_detail_1 */
-#define CA_PKT_TYPE (0xfull << 0)
-#define CA_PKT_TYPE_SHFT 0
-#define CA_SRC_ID (0x3ull << 4)
-#define CA_SRC_ID_SHFT 4
-#define CA_DATA_SZ (0x3ull << 6)
-#define CA_DATA_SZ_SHFT 6
-#define CA_TNUM (0xffull << 8)
-#define CA_TNUM_SHFT 8
-#define CA_DW_DATA_EN (0xffull << 16)
-#define CA_DW_DATA_EN_SHFT 16
-#define CA_GFX_CRED (0xffull << 24)
-#define CA_GFX_CRED_SHFT 24
-#define CA_MEM_RD_PARAM (0x3ull << 32)
-#define CA_MEM_RD_PARAM_SHFT 32
-#define CA_PIO_OP (1ull << 34)
-#define CA_CW_ERR (1ull << 35)
- /* bits 62:36 unused */
-#define CA_VALID (1ull << 63)
-
-/* ==== ca_crm_ct_error_detail_2 */
- /* bits 2:0 unused */
-#define CA_PKT_ADDR (0x1fffffffffffffull << 3)
-#define CA_PKT_ADDR_SHFT 3
- /* bits 63:56 unused */
-
-/* ==== ca_crm_tnumto */
-#define CA_CRM_TNUMTO_VAL (0xffull << 0)
-#define CA_CRM_TNUMTO_VAL_SHFT 0
-#define CA_CRM_TNUMTO_WR (1ull << 8)
- /* bits 63:9 unused */
-
-/* ==== ca_gart_err */
-#define CA_GART_ERR_SOURCE (0x3ull << 0)
-#define CA_GART_ERR_SOURCE_SHFT 0
- /* bits 3:2 unused */
-#define CA_GART_ERR_ADDR (0xfffffffffull << 4)
-#define CA_GART_ERR_ADDR_SHFT 4
- /* bits 63:40 unused */
-
-/* ==== ca_pcierr_type */
-#define CA_PCIERR_DATA (0xffffffffull << 0)
-#define CA_PCIERR_DATA_SHFT 0
-#define CA_PCIERR_ENB (0xfull << 32)
-#define CA_PCIERR_ENB_SHFT 32
-#define CA_PCIERR_CMD (0xfull << 36)
-#define CA_PCIERR_CMD_SHFT 36
-#define CA_PCIERR_A64 (1ull << 40)
-#define CA_PCIERR_SLV_SERR (1ull << 41)
-#define CA_PCIERR_SLV_WR_PERR (1ull << 42)
-#define CA_PCIERR_SLV_RD_PERR (1ull << 43)
-#define CA_PCIERR_MST_SERR (1ull << 44)
-#define CA_PCIERR_MST_WR_PERR (1ull << 45)
-#define CA_PCIERR_MST_RD_PERR (1ull << 46)
-#define CA_PCIERR_MST_MABT (1ull << 47)
-#define CA_PCIERR_MST_TABT (1ull << 48)
-#define CA_PCIERR_MST_RETRY_TOUT (1ull << 49)
-
-#define CA_PCIERR_TYPES \
- (CA_PCIERR_A64|CA_PCIERR_SLV_SERR| \
- CA_PCIERR_SLV_WR_PERR|CA_PCIERR_SLV_RD_PERR| \
- CA_PCIERR_MST_SERR|CA_PCIERR_MST_WR_PERR|CA_PCIERR_MST_RD_PERR| \
- CA_PCIERR_MST_MABT|CA_PCIERR_MST_TABT|CA_PCIERR_MST_RETRY_TOUT)
-
- /* bits 63:50 unused */
-
-/* ==== ca_pci_dma_addr_extn */
-#define CA_UPPER_NODE_OFFSET (0x3full << 0)
-#define CA_UPPER_NODE_OFFSET_SHFT 0
- /* bits 7:6 unused */
-#define CA_CHIPLET_ID (0x3ull << 8)
-#define CA_CHIPLET_ID_SHFT 8
- /* bits 11:10 unused */
-#define CA_PCI_DMA_NODE_ID (0xffffull << 12)
-#define CA_PCI_DMA_NODE_ID_SHFT 12
- /* bits 27:26 unused */
-#define CA_PCI_DMA_PIO_MEM_TYPE (1ull << 28)
- /* bits 63:29 unused */
-
-
-/* ==== ca_agp_dma_addr_extn */
- /* bits 19:0 unused */
-#define CA_AGP_DMA_NODE_ID (0xffffull << 20)
-#define CA_AGP_DMA_NODE_ID_SHFT 20
- /* bits 27:26 unused */
-#define CA_AGP_DMA_PIO_MEM_TYPE (1ull << 28)
- /* bits 63:29 unused */
-
-/* ==== ca_debug_vector_sel */
-#define CA_DEBUG_MN_VSEL (0xfull << 0)
-#define CA_DEBUG_MN_VSEL_SHFT 0
-#define CA_DEBUG_PP_VSEL (0xfull << 4)
-#define CA_DEBUG_PP_VSEL_SHFT 4
-#define CA_DEBUG_GW_VSEL (0xfull << 8)
-#define CA_DEBUG_GW_VSEL_SHFT 8
-#define CA_DEBUG_GT_VSEL (0xfull << 12)
-#define CA_DEBUG_GT_VSEL_SHFT 12
-#define CA_DEBUG_PD_VSEL (0xfull << 16)
-#define CA_DEBUG_PD_VSEL_SHFT 16
-#define CA_DEBUG_AD_VSEL (0xfull << 20)
-#define CA_DEBUG_AD_VSEL_SHFT 20
-#define CA_DEBUG_CX_VSEL (0xfull << 24)
-#define CA_DEBUG_CX_VSEL_SHFT 24
-#define CA_DEBUG_CR_VSEL (0xfull << 28)
-#define CA_DEBUG_CR_VSEL_SHFT 28
-#define CA_DEBUG_BA_VSEL (0xfull << 32)
-#define CA_DEBUG_BA_VSEL_SHFT 32
-#define CA_DEBUG_PE_VSEL (0xfull << 36)
-#define CA_DEBUG_PE_VSEL_SHFT 36
-#define CA_DEBUG_BO_VSEL (0xfull << 40)
-#define CA_DEBUG_BO_VSEL_SHFT 40
-#define CA_DEBUG_BI_VSEL (0xfull << 44)
-#define CA_DEBUG_BI_VSEL_SHFT 44
-#define CA_DEBUG_AS_VSEL (0xfull << 48)
-#define CA_DEBUG_AS_VSEL_SHFT 48
-#define CA_DEBUG_PS_VSEL (0xfull << 52)
-#define CA_DEBUG_PS_VSEL_SHFT 52
-#define CA_DEBUG_PM_VSEL (0xfull << 56)
-#define CA_DEBUG_PM_VSEL_SHFT 56
- /* bits 63:60 unused */
-
-/* ==== ca_debug_mux_core_sel */
-/* ==== ca_debug_mux_pci_sel */
-#define CA_DEBUG_MSEL0 (0x7ull << 0)
-#define CA_DEBUG_MSEL0_SHFT 0
- /* bit 3 unused */
-#define CA_DEBUG_NSEL0 (0x7ull << 4)
-#define CA_DEBUG_NSEL0_SHFT 4
- /* bit 7 unused */
-#define CA_DEBUG_MSEL1 (0x7ull << 8)
-#define CA_DEBUG_MSEL1_SHFT 8
- /* bit 11 unused */
-#define CA_DEBUG_NSEL1 (0x7ull << 12)
-#define CA_DEBUG_NSEL1_SHFT 12
- /* bit 15 unused */
-#define CA_DEBUG_MSEL2 (0x7ull << 16)
-#define CA_DEBUG_MSEL2_SHFT 16
- /* bit 19 unused */
-#define CA_DEBUG_NSEL2 (0x7ull << 20)
-#define CA_DEBUG_NSEL2_SHFT 20
- /* bit 23 unused */
-#define CA_DEBUG_MSEL3 (0x7ull << 24)
-#define CA_DEBUG_MSEL3_SHFT 24
- /* bit 27 unused */
-#define CA_DEBUG_NSEL3 (0x7ull << 28)
-#define CA_DEBUG_NSEL3_SHFT 28
- /* bit 31 unused */
-#define CA_DEBUG_MSEL4 (0x7ull << 32)
-#define CA_DEBUG_MSEL4_SHFT 32
- /* bit 35 unused */
-#define CA_DEBUG_NSEL4 (0x7ull << 36)
-#define CA_DEBUG_NSEL4_SHFT 36
- /* bit 39 unused */
-#define CA_DEBUG_MSEL5 (0x7ull << 40)
-#define CA_DEBUG_MSEL5_SHFT 40
- /* bit 43 unused */
-#define CA_DEBUG_NSEL5 (0x7ull << 44)
-#define CA_DEBUG_NSEL5_SHFT 44
- /* bit 47 unused */
-#define CA_DEBUG_MSEL6 (0x7ull << 48)
-#define CA_DEBUG_MSEL6_SHFT 48
- /* bit 51 unused */
-#define CA_DEBUG_NSEL6 (0x7ull << 52)
-#define CA_DEBUG_NSEL6_SHFT 52
- /* bit 55 unused */
-#define CA_DEBUG_MSEL7 (0x7ull << 56)
-#define CA_DEBUG_MSEL7_SHFT 56
- /* bit 59 unused */
-#define CA_DEBUG_NSEL7 (0x7ull << 60)
-#define CA_DEBUG_NSEL7_SHFT 60
- /* bit 63 unused */
-
-
-/* ==== ca_debug_domain_sel */
-#define CA_DEBUG_DOMAIN_L (1ull << 0)
-#define CA_DEBUG_DOMAIN_H (1ull << 1)
- /* bits 63:2 unused */
-
-/* ==== ca_gart_ptr_table */
-#define CA_GART_PTR_VAL (1ull << 0)
- /* bits 11:1 unused */
-#define CA_GART_PTR_ADDR (0xfffffffffffull << 12)
-#define CA_GART_PTR_ADDR_SHFT 12
- /* bits 63:56 unused */
-
-/* ==== ca_gart_tlb_addr[0-7] */
-#define CA_GART_TLB_ADDR (0xffffffffffffffull << 0)
-#define CA_GART_TLB_ADDR_SHFT 0
- /* bits 62:56 unused */
-#define CA_GART_TLB_ENTRY_VAL (1ull << 63)
-
-/*
- * PIO address space ranges for TIO:CA
- */
-
-/* CA internal registers */
-#define CA_PIO_ADMIN 0x00000000
-#define CA_PIO_ADMIN_LEN 0x00010000
-
-/* GFX Write Buffer - Diagnostics */
-#define CA_PIO_GFX 0x00010000
-#define CA_PIO_GFX_LEN 0x00010000
-
-/* AGP DMA Write Buffer - Diagnostics */
-#define CA_PIO_AGP_DMAWRITE 0x00020000
-#define CA_PIO_AGP_DMAWRITE_LEN 0x00010000
-
-/* AGP DMA READ Buffer - Diagnostics */
-#define CA_PIO_AGP_DMAREAD 0x00030000
-#define CA_PIO_AGP_DMAREAD_LEN 0x00010000
-
-/* PCI Config Type 0 */
-#define CA_PIO_PCI_TYPE0_CONFIG 0x01000000
-#define CA_PIO_PCI_TYPE0_CONFIG_LEN 0x01000000
-
-/* PCI Config Type 1 */
-#define CA_PIO_PCI_TYPE1_CONFIG 0x02000000
-#define CA_PIO_PCI_TYPE1_CONFIG_LEN 0x01000000
-
-/* PCI I/O Cycles - mapped to PCI Address 0x00000000-0x04ffffff */
-#define CA_PIO_PCI_IO 0x03000000
-#define CA_PIO_PCI_IO_LEN 0x05000000
-
-/* PCI MEM Cycles - mapped to PCI with CA_PIO_ADDR_OFFSET of ca_control1 */
-/* use Fast Write if enabled and coretalk packet type is a GFX request */
-#define CA_PIO_PCI_MEM_OFFSET 0x08000000
-#define CA_PIO_PCI_MEM_OFFSET_LEN 0x08000000
-
-/* PCI MEM Cycles - mapped to PCI Address 0x00000000-0xbfffffff */
-/* use Fast Write if enabled and coretalk packet type is a GFX request */
-#define CA_PIO_PCI_MEM 0x40000000
-#define CA_PIO_PCI_MEM_LEN 0xc0000000
-
-/*
- * DMA space
- *
- * The CA aperature (ie. bus address range) mapped by the GART is segmented into
- * two parts. The lower portion of the aperature is used for mapping 32 bit
- * PCI addresses which are managed by the dma interfaces in this file. The
- * upper poprtion of the aperature is used for mapping 48 bit AGP addresses.
- * The AGP portion of the aperature is managed by the agpgart_be.c driver
- * in drivers/linux/agp. There are ca-specific hooks in that driver to
- * manipulate the gart, but management of the AGP portion of the aperature
- * is the responsibility of that driver.
- *
- * CA allows three main types of DMA mapping:
- *
- * PCI 64-bit Managed by this driver
- * PCI 32-bit Managed by this driver
- * AGP 48-bit Managed by hooks in the /dev/agpgart driver
- *
- * All of the above can optionally be remapped through the GART. The following
- * table lists the combinations of addressing types and GART remapping that
- * is currently supported by the driver (h/w supports all, s/w limits this):
- *
- * PCI64 PCI32 AGP48
- * GART no yes yes
- * Direct yes yes no
- *
- * GART remapping of PCI64 is not done because there is no need to. The
- * 64 bit PCI address holds all of the information necessary to target any
- * memory in the system.
- *
- * AGP48 is always mapped through the GART. Management of the AGP48 portion
- * of the aperature is the responsibility of code in the agpgart_be driver.
- *
- * The non-64 bit bus address space will currently be partitioned like this:
- *
- * 0xffff_ffff_ffff +--------
- * | AGP48 direct
- * | Space managed by this driver
- * CA_AGP_DIRECT_BASE +--------
- * | AGP GART mapped (gfx aperature)
- * | Space managed by /dev/agpgart driver
- * | This range is exposed to the agpgart
- * | driver as the "graphics aperature"
- * CA_AGP_MAPPED_BASE +-----
- * | PCI GART mapped
- * | Space managed by this driver
- * CA_PCI32_MAPPED_BASE +----
- * | PCI32 direct
- * | Space managed by this driver
- * 0xC000_0000 +--------
- * (CA_PCI32_DIRECT_BASE)
- *
- * The bus address range CA_PCI32_MAPPED_BASE through CA_AGP_DIRECT_BASE
- * is what we call the CA aperature. Addresses falling in this range will
- * be remapped using the GART.
- *
- * The bus address range CA_AGP_MAPPED_BASE through CA_AGP_DIRECT_BASE
- * is what we call the graphics aperature. This is a subset of the CA
- * aperature and is under the control of the agpgart_be driver.
- *
- * CA_PCI32_MAPPED_BASE, CA_AGP_MAPPED_BASE, and CA_AGP_DIRECT_BASE are
- * somewhat arbitrary values. The known constraints on choosing these is:
- *
- * 1) CA_AGP_DIRECT_BASE-CA_PCI32_MAPPED_BASE+1 (the CA aperature size)
- * must be one of the values supported by the ca_gart_aperature register.
- * Currently valid values are: 4MB through 4096MB in powers of 2 increments
- *
- * 2) CA_AGP_DIRECT_BASE-CA_AGP_MAPPED_BASE+1 (the gfx aperature size)
- * must be in MB units since that's what the agpgart driver assumes.
- */
-
-/*
- * Define Bus DMA ranges. These are configurable (see constraints above)
- * and will probably need tuning based on experience.
- */
-
-
-/*
- * 11/24/03
- * CA has an addressing glitch w.r.t. PCI direct 32 bit DMA that makes it
- * generally unusable. The problem is that for PCI direct 32
- * DMA's, all 32 bits of the bus address are used to form the lower 32 bits
- * of the coretalk address, and coretalk bits 38:32 come from a register.
- * Since only PCI bus addresses 0xC0000000-0xFFFFFFFF (1GB) are available
- * for DMA (the rest is allocated to PIO), host node addresses need to be
- * such that their lower 32 bits fall in the 0xC0000000-0xffffffff range
- * as well. So there can be no PCI32 direct DMA below 3GB!! For this
- * reason we set the CA_PCI32_DIRECT_SIZE to 0 which essentially makes
- * tioca_dma_direct32() a noop but preserves the code flow should this issue
- * be fixed in a respin.
- *
- * For now, all PCI32 DMA's must be mapped through the GART.
- */
-
-#define CA_PCI32_DIRECT_BASE 0xC0000000UL /* BASE not configurable */
-#define CA_PCI32_DIRECT_SIZE 0x00000000UL /* 0 MB */
-
-#define CA_PCI32_MAPPED_BASE 0xC0000000UL
-#define CA_PCI32_MAPPED_SIZE 0x40000000UL /* 2GB */
-
-#define CA_AGP_MAPPED_BASE 0x80000000UL
-#define CA_AGP_MAPPED_SIZE 0x40000000UL /* 2GB */
-
-#define CA_AGP_DIRECT_BASE 0x40000000UL /* 2GB */
-#define CA_AGP_DIRECT_SIZE 0x40000000UL
-
-#define CA_APERATURE_BASE (CA_AGP_MAPPED_BASE)
-#define CA_APERATURE_SIZE (CA_AGP_MAPPED_SIZE+CA_PCI32_MAPPED_SIZE)
-
-#endif /* _ASM_IA64_SN_TIO_TIOCA_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
-#define _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H
-
-#include <asm/sn/tioca.h>
-
-/*
- * WAR enables
- * Defines for individual WARs. Each is a bitmask of applicable
- * part revision numbers. (1 << 1) == rev A, (1 << 2) == rev B,
- * (3 << 1) == (rev A or rev B), etc
- */
-
-#define TIOCA_WAR_ENABLED(pv, tioca_common) \
- ((1 << tioca_common->ca_rev) & pv)
-
- /* TIO:ICE:FRZ:Freezer loses a PIO data ucred on PIO RD RSP with CW error */
-#define PV907908 (1 << 1)
- /* ATI config space problems after BIOS execution starts */
-#define PV908234 (1 << 1)
- /* CA:AGPDMA write request data mismatch with ABC1CL merge */
-#define PV895469 (1 << 1)
- /* TIO:CA TLB invalidate of written GART entries possibly not occurring in CA*/
-#define PV910244 (1 << 1)
-
-struct tioca_dmamap{
- struct list_head cad_list; /* headed by ca_list */
-
- dma_addr_t cad_dma_addr; /* Linux dma handle */
- uint cad_gart_entry; /* start entry in ca_gart_pagemap */
- uint cad_gart_size; /* #entries for this map */
-};
-
-/*
- * Kernel only fields. Prom may look at this stuff for debugging only.
- * Access this structure through the ca_kernel_private ptr.
- */
-
-struct tioca_common ;
-
-struct tioca_kernel {
- struct tioca_common *ca_common; /* tioca this belongs to */
- struct list_head ca_list; /* list of all ca's */
- struct list_head ca_dmamaps;
- spinlock_t ca_lock; /* Kernel lock */
- cnodeid_t ca_closest_node;
- struct list_head *ca_devices; /* bus->devices */
-
- /*
- * General GART stuff
- */
- u64 ca_ap_size; /* size of aperature in bytes */
- u32 ca_gart_entries; /* # u64 entries in gart */
- u32 ca_ap_pagesize; /* aperature page size in bytes */
- u64 ca_ap_bus_base; /* bus address of CA aperature */
- u64 ca_gart_size; /* gart size in bytes */
- u64 *ca_gart; /* gart table vaddr */
- u64 ca_gart_coretalk_addr; /* gart coretalk addr */
- u8 ca_gart_iscoherent; /* used in tioca_tlbflush */
-
- /* PCI GART convenience values */
- u64 ca_pciap_base; /* pci aperature bus base address */
- u64 ca_pciap_size; /* pci aperature size (bytes) */
- u64 ca_pcigart_base; /* gfx GART bus base address */
- u64 *ca_pcigart; /* gfx GART vm address */
- u32 ca_pcigart_entries;
- u32 ca_pcigart_start; /* PCI start index in ca_gart */
- void *ca_pcigart_pagemap;
-
- /* AGP GART convenience values */
- u64 ca_gfxap_base; /* gfx aperature bus base address */
- u64 ca_gfxap_size; /* gfx aperature size (bytes) */
- u64 ca_gfxgart_base; /* gfx GART bus base address */
- u64 *ca_gfxgart; /* gfx GART vm address */
- u32 ca_gfxgart_entries;
- u32 ca_gfxgart_start; /* agpgart start index in ca_gart */
-};
-
-/*
- * Common tioca info shared between kernel and prom
- *
- * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES
- * TO THE PROM VERSION.
- */
-
-struct tioca_common {
- struct pcibus_bussoft ca_common; /* common pciio header */
-
- u32 ca_rev;
- u32 ca_closest_nasid;
-
- u64 ca_prom_private;
- u64 ca_kernel_private;
-};
-
-/**
- * tioca_paddr_to_gart - Convert an SGI coretalk address to a CA GART entry
- * @paddr: page address to convert
- *
- * Convert a system [coretalk] address to a GART entry. GART entries are
- * formed using the following:
- *
- * data = ( (1<<63) | ( (REMAP_NODE_ID << 40) | (MD_CHIPLET_ID << 38) |
- * (REMAP_SYS_ADDR) ) >> 12 )
- *
- * DATA written to 1 GART TABLE Entry in system memory is remapped system
- * addr for 1 page
- *
- * The data is for coretalk address format right shifted 12 bits with a
- * valid bit.
- *
- * GART_TABLE_ENTRY [ 25:0 ] -- REMAP_SYS_ADDRESS[37:12].
- * GART_TABLE_ENTRY [ 27:26 ] -- SHUB MD chiplet id.
- * GART_TABLE_ENTRY [ 41:28 ] -- REMAP_NODE_ID.
- * GART_TABLE_ENTRY [ 63 ] -- Valid Bit
- */
-static inline u64
-tioca_paddr_to_gart(unsigned long paddr)
-{
- /*
- * We are assuming right now that paddr already has the correct
- * format since the address from xtalk_dmaXXX should already have
- * NODE_ID, CHIPLET_ID, and SYS_ADDR in the correct locations.
- */
-
- return ((paddr) >> 12) | (1UL << 63);
-}
-
-/**
- * tioca_physpage_to_gart - Map a host physical page for SGI CA based DMA
- * @page_addr: system page address to map
- */
-
-static inline unsigned long
-tioca_physpage_to_gart(u64 page_addr)
-{
- u64 coretalk_addr;
-
- coretalk_addr = PHYS_TO_TIODMA(page_addr);
- if (!coretalk_addr) {
- return 0;
- }
-
- return tioca_paddr_to_gart(coretalk_addr);
-}
-
-/**
- * tioca_tlbflush - invalidate cached SGI CA GART TLB entries
- * @tioca_kernel: CA context
- *
- * Invalidate tlb entries for a given CA GART. Main complexity is to account
- * for revA bug.
- */
-static inline void
-tioca_tlbflush(struct tioca_kernel *tioca_kernel)
-{
- volatile u64 tmp;
- volatile struct tioca __iomem *ca_base;
- struct tioca_common *tioca_common;
-
- tioca_common = tioca_kernel->ca_common;
- ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
-
- /*
- * Explicit flushes not needed if GART is in cached mode
- */
- if (tioca_kernel->ca_gart_iscoherent) {
- if (TIOCA_WAR_ENABLED(PV910244, tioca_common)) {
- /*
- * PV910244: RevA CA needs explicit flushes.
- * Need to put GART into uncached mode before
- * flushing otherwise the explicit flush is ignored.
- *
- * Alternate WAR would be to leave GART cached and
- * touch every CL aligned GART entry.
- */
-
- __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
- __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
- __sn_setq_relaxed(&ca_base->ca_control2,
- (0x2ull << CA_GART_MEM_PARAM_SHFT));
- tmp = __sn_readq_relaxed(&ca_base->ca_control2);
- }
-
- return;
- }
-
- /*
- * Gart in uncached mode ... need an explicit flush.
- */
-
- __sn_setq_relaxed(&ca_base->ca_control2, CA_GART_FLUSH_TLB);
- tmp = __sn_readq_relaxed(&ca_base->ca_control2);
-}
-
-extern u32 tioca_gart_found;
-extern struct list_head tioca_list;
-extern int tioca_init_provider(void);
-extern void tioca_fastwrite_enable(struct tioca_kernel *tioca_kern);
-#endif /* _ASM_IA64_SN_TIO_CA_AGP_PROVIDER_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef __ASM_IA64_SN_TIOCE_H__
-#define __ASM_IA64_SN_TIOCE_H__
-
-/* CE ASIC part & mfgr information */
-#define TIOCE_PART_NUM 0xCE00
-#define TIOCE_SRC_ID 0x01
-#define TIOCE_REV_A 0x1
-
-/* CE Virtual PPB Vendor/Device IDs */
-#define CE_VIRT_PPB_VENDOR_ID 0x10a9
-#define CE_VIRT_PPB_DEVICE_ID 0x4002
-
-/* CE Host Bridge Vendor/Device IDs */
-#define CE_HOST_BRIDGE_VENDOR_ID 0x10a9
-#define CE_HOST_BRIDGE_DEVICE_ID 0x4001
-
-
-#define TIOCE_NUM_M40_ATES 4096
-#define TIOCE_NUM_M3240_ATES 2048
-#define TIOCE_NUM_PORTS 2
-
-/*
- * Register layout for TIOCE. MMR offsets are shown at the far right of the
- * structure definition.
- */
-typedef volatile struct tioce {
- /*
- * ADMIN : Administration Registers
- */
- u64 ce_adm_id; /* 0x000000 */
- u64 ce_pad_000008; /* 0x000008 */
- u64 ce_adm_dyn_credit_status; /* 0x000010 */
- u64 ce_adm_last_credit_status; /* 0x000018 */
- u64 ce_adm_credit_limit; /* 0x000020 */
- u64 ce_adm_force_credit; /* 0x000028 */
- u64 ce_adm_control; /* 0x000030 */
- u64 ce_adm_mmr_chn_timeout; /* 0x000038 */
- u64 ce_adm_ssp_ure_timeout; /* 0x000040 */
- u64 ce_adm_ssp_dre_timeout; /* 0x000048 */
- u64 ce_adm_ssp_debug_sel; /* 0x000050 */
- u64 ce_adm_int_status; /* 0x000058 */
- u64 ce_adm_int_status_alias; /* 0x000060 */
- u64 ce_adm_int_mask; /* 0x000068 */
- u64 ce_adm_int_pending; /* 0x000070 */
- u64 ce_adm_force_int; /* 0x000078 */
- u64 ce_adm_ure_ups_buf_barrier_flush; /* 0x000080 */
- u64 ce_adm_int_dest[15]; /* 0x000088 -- 0x0000F8 */
- u64 ce_adm_error_summary; /* 0x000100 */
- u64 ce_adm_error_summary_alias; /* 0x000108 */
- u64 ce_adm_error_mask; /* 0x000110 */
- u64 ce_adm_first_error; /* 0x000118 */
- u64 ce_adm_error_overflow; /* 0x000120 */
- u64 ce_adm_error_overflow_alias; /* 0x000128 */
- u64 ce_pad_000130[2]; /* 0x000130 -- 0x000138 */
- u64 ce_adm_tnum_error; /* 0x000140 */
- u64 ce_adm_mmr_err_detail; /* 0x000148 */
- u64 ce_adm_msg_sram_perr_detail; /* 0x000150 */
- u64 ce_adm_bap_sram_perr_detail; /* 0x000158 */
- u64 ce_adm_ce_sram_perr_detail; /* 0x000160 */
- u64 ce_adm_ce_credit_oflow_detail; /* 0x000168 */
- u64 ce_adm_tx_link_idle_max_timer; /* 0x000170 */
- u64 ce_adm_pcie_debug_sel; /* 0x000178 */
- u64 ce_pad_000180[16]; /* 0x000180 -- 0x0001F8 */
-
- u64 ce_adm_pcie_debug_sel_top; /* 0x000200 */
- u64 ce_adm_pcie_debug_lat_sel_lo_top; /* 0x000208 */
- u64 ce_adm_pcie_debug_lat_sel_hi_top; /* 0x000210 */
- u64 ce_adm_pcie_debug_trig_sel_top; /* 0x000218 */
- u64 ce_adm_pcie_debug_trig_lat_sel_lo_top; /* 0x000220 */
- u64 ce_adm_pcie_debug_trig_lat_sel_hi_top; /* 0x000228 */
- u64 ce_adm_pcie_trig_compare_top; /* 0x000230 */
- u64 ce_adm_pcie_trig_compare_en_top; /* 0x000238 */
- u64 ce_adm_ssp_debug_sel_top; /* 0x000240 */
- u64 ce_adm_ssp_debug_lat_sel_lo_top; /* 0x000248 */
- u64 ce_adm_ssp_debug_lat_sel_hi_top; /* 0x000250 */
- u64 ce_adm_ssp_debug_trig_sel_top; /* 0x000258 */
- u64 ce_adm_ssp_debug_trig_lat_sel_lo_top; /* 0x000260 */
- u64 ce_adm_ssp_debug_trig_lat_sel_hi_top; /* 0x000268 */
- u64 ce_adm_ssp_trig_compare_top; /* 0x000270 */
- u64 ce_adm_ssp_trig_compare_en_top; /* 0x000278 */
- u64 ce_pad_000280[48]; /* 0x000280 -- 0x0003F8 */
-
- u64 ce_adm_bap_ctrl; /* 0x000400 */
- u64 ce_pad_000408[127]; /* 0x000408 -- 0x0007F8 */
-
- u64 ce_msg_buf_data63_0[35]; /* 0x000800 -- 0x000918 */
- u64 ce_pad_000920[29]; /* 0x000920 -- 0x0009F8 */
-
- u64 ce_msg_buf_data127_64[35]; /* 0x000A00 -- 0x000B18 */
- u64 ce_pad_000B20[29]; /* 0x000B20 -- 0x000BF8 */
-
- u64 ce_msg_buf_parity[35]; /* 0x000C00 -- 0x000D18 */
- u64 ce_pad_000D20[29]; /* 0x000D20 -- 0x000DF8 */
-
- u64 ce_pad_000E00[576]; /* 0x000E00 -- 0x001FF8 */
-
- /*
- * LSI : LSI's PCI Express Link Registers (Link#1 and Link#2)
- * Link#1 MMRs at start at 0x002000, Link#2 MMRs at 0x003000
- * NOTE: the comment offsets at far right: let 'z' = {2 or 3}
- */
- #define ce_lsi(link_num) ce_lsi[link_num-1]
- struct ce_lsi_reg {
- u64 ce_lsi_lpu_id; /* 0x00z000 */
- u64 ce_lsi_rst; /* 0x00z008 */
- u64 ce_lsi_dbg_stat; /* 0x00z010 */
- u64 ce_lsi_dbg_cfg; /* 0x00z018 */
- u64 ce_lsi_ltssm_ctrl; /* 0x00z020 */
- u64 ce_lsi_lk_stat; /* 0x00z028 */
- u64 ce_pad_00z030[2]; /* 0x00z030 -- 0x00z038 */
- u64 ce_lsi_int_and_stat; /* 0x00z040 */
- u64 ce_lsi_int_mask; /* 0x00z048 */
- u64 ce_pad_00z050[22]; /* 0x00z050 -- 0x00z0F8 */
- u64 ce_lsi_lk_perf_cnt_sel; /* 0x00z100 */
- u64 ce_pad_00z108; /* 0x00z108 */
- u64 ce_lsi_lk_perf_cnt_ctrl; /* 0x00z110 */
- u64 ce_pad_00z118; /* 0x00z118 */
- u64 ce_lsi_lk_perf_cnt1; /* 0x00z120 */
- u64 ce_lsi_lk_perf_cnt1_test; /* 0x00z128 */
- u64 ce_lsi_lk_perf_cnt2; /* 0x00z130 */
- u64 ce_lsi_lk_perf_cnt2_test; /* 0x00z138 */
- u64 ce_pad_00z140[24]; /* 0x00z140 -- 0x00z1F8 */
- u64 ce_lsi_lk_lyr_cfg; /* 0x00z200 */
- u64 ce_lsi_lk_lyr_status; /* 0x00z208 */
- u64 ce_lsi_lk_lyr_int_stat; /* 0x00z210 */
- u64 ce_lsi_lk_ly_int_stat_test; /* 0x00z218 */
- u64 ce_lsi_lk_ly_int_stat_mask; /* 0x00z220 */
- u64 ce_pad_00z228[3]; /* 0x00z228 -- 0x00z238 */
- u64 ce_lsi_fc_upd_ctl; /* 0x00z240 */
- u64 ce_pad_00z248[3]; /* 0x00z248 -- 0x00z258 */
- u64 ce_lsi_flw_ctl_upd_to_timer; /* 0x00z260 */
- u64 ce_lsi_flw_ctl_upd_timer0; /* 0x00z268 */
- u64 ce_lsi_flw_ctl_upd_timer1; /* 0x00z270 */
- u64 ce_pad_00z278[49]; /* 0x00z278 -- 0x00z3F8 */
- u64 ce_lsi_freq_nak_lat_thrsh; /* 0x00z400 */
- u64 ce_lsi_ack_nak_lat_tmr; /* 0x00z408 */
- u64 ce_lsi_rply_tmr_thr; /* 0x00z410 */
- u64 ce_lsi_rply_tmr; /* 0x00z418 */
- u64 ce_lsi_rply_num_stat; /* 0x00z420 */
- u64 ce_lsi_rty_buf_max_addr; /* 0x00z428 */
- u64 ce_lsi_rty_fifo_ptr; /* 0x00z430 */
- u64 ce_lsi_rty_fifo_rd_wr_ptr; /* 0x00z438 */
- u64 ce_lsi_rty_fifo_cred; /* 0x00z440 */
- u64 ce_lsi_seq_cnt; /* 0x00z448 */
- u64 ce_lsi_ack_sent_seq_num; /* 0x00z450 */
- u64 ce_lsi_seq_cnt_fifo_max_addr; /* 0x00z458 */
- u64 ce_lsi_seq_cnt_fifo_ptr; /* 0x00z460 */
- u64 ce_lsi_seq_cnt_rd_wr_ptr; /* 0x00z468 */
- u64 ce_lsi_tx_lk_ts_ctl; /* 0x00z470 */
- u64 ce_pad_00z478; /* 0x00z478 */
- u64 ce_lsi_mem_addr_ctl; /* 0x00z480 */
- u64 ce_lsi_mem_d_ld0; /* 0x00z488 */
- u64 ce_lsi_mem_d_ld1; /* 0x00z490 */
- u64 ce_lsi_mem_d_ld2; /* 0x00z498 */
- u64 ce_lsi_mem_d_ld3; /* 0x00z4A0 */
- u64 ce_lsi_mem_d_ld4; /* 0x00z4A8 */
- u64 ce_pad_00z4B0[2]; /* 0x00z4B0 -- 0x00z4B8 */
- u64 ce_lsi_rty_d_cnt; /* 0x00z4C0 */
- u64 ce_lsi_seq_buf_cnt; /* 0x00z4C8 */
- u64 ce_lsi_seq_buf_bt_d; /* 0x00z4D0 */
- u64 ce_pad_00z4D8; /* 0x00z4D8 */
- u64 ce_lsi_ack_lat_thr; /* 0x00z4E0 */
- u64 ce_pad_00z4E8[3]; /* 0x00z4E8 -- 0x00z4F8 */
- u64 ce_lsi_nxt_rcv_seq_1_cntr; /* 0x00z500 */
- u64 ce_lsi_unsp_dllp_rcvd; /* 0x00z508 */
- u64 ce_lsi_rcv_lk_ts_ctl; /* 0x00z510 */
- u64 ce_pad_00z518[29]; /* 0x00z518 -- 0x00z5F8 */
- u64 ce_lsi_phy_lyr_cfg; /* 0x00z600 */
- u64 ce_pad_00z608; /* 0x00z608 */
- u64 ce_lsi_phy_lyr_int_stat; /* 0x00z610 */
- u64 ce_lsi_phy_lyr_int_stat_test; /* 0x00z618 */
- u64 ce_lsi_phy_lyr_int_mask; /* 0x00z620 */
- u64 ce_pad_00z628[11]; /* 0x00z628 -- 0x00z678 */
- u64 ce_lsi_rcv_phy_cfg; /* 0x00z680 */
- u64 ce_lsi_rcv_phy_stat1; /* 0x00z688 */
- u64 ce_lsi_rcv_phy_stat2; /* 0x00z690 */
- u64 ce_lsi_rcv_phy_stat3; /* 0x00z698 */
- u64 ce_lsi_rcv_phy_int_stat; /* 0x00z6A0 */
- u64 ce_lsi_rcv_phy_int_stat_test; /* 0x00z6A8 */
- u64 ce_lsi_rcv_phy_int_mask; /* 0x00z6B0 */
- u64 ce_pad_00z6B8[9]; /* 0x00z6B8 -- 0x00z6F8 */
- u64 ce_lsi_tx_phy_cfg; /* 0x00z700 */
- u64 ce_lsi_tx_phy_stat; /* 0x00z708 */
- u64 ce_lsi_tx_phy_int_stat; /* 0x00z710 */
- u64 ce_lsi_tx_phy_int_stat_test; /* 0x00z718 */
- u64 ce_lsi_tx_phy_int_mask; /* 0x00z720 */
- u64 ce_lsi_tx_phy_stat2; /* 0x00z728 */
- u64 ce_pad_00z730[10]; /* 0x00z730 -- 0x00z77F */
- u64 ce_lsi_ltssm_cfg1; /* 0x00z780 */
- u64 ce_lsi_ltssm_cfg2; /* 0x00z788 */
- u64 ce_lsi_ltssm_cfg3; /* 0x00z790 */
- u64 ce_lsi_ltssm_cfg4; /* 0x00z798 */
- u64 ce_lsi_ltssm_cfg5; /* 0x00z7A0 */
- u64 ce_lsi_ltssm_stat1; /* 0x00z7A8 */
- u64 ce_lsi_ltssm_stat2; /* 0x00z7B0 */
- u64 ce_lsi_ltssm_int_stat; /* 0x00z7B8 */
- u64 ce_lsi_ltssm_int_stat_test; /* 0x00z7C0 */
- u64 ce_lsi_ltssm_int_mask; /* 0x00z7C8 */
- u64 ce_lsi_ltssm_stat_wr_en; /* 0x00z7D0 */
- u64 ce_pad_00z7D8[5]; /* 0x00z7D8 -- 0x00z7F8 */
- u64 ce_lsi_gb_cfg1; /* 0x00z800 */
- u64 ce_lsi_gb_cfg2; /* 0x00z808 */
- u64 ce_lsi_gb_cfg3; /* 0x00z810 */
- u64 ce_lsi_gb_cfg4; /* 0x00z818 */
- u64 ce_lsi_gb_stat; /* 0x00z820 */
- u64 ce_lsi_gb_int_stat; /* 0x00z828 */
- u64 ce_lsi_gb_int_stat_test; /* 0x00z830 */
- u64 ce_lsi_gb_int_mask; /* 0x00z838 */
- u64 ce_lsi_gb_pwr_dn1; /* 0x00z840 */
- u64 ce_lsi_gb_pwr_dn2; /* 0x00z848 */
- u64 ce_pad_00z850[246]; /* 0x00z850 -- 0x00zFF8 */
- } ce_lsi[2];
-
- u64 ce_pad_004000[10]; /* 0x004000 -- 0x004048 */
-
- /*
- * CRM: Coretalk Receive Module Registers
- */
- u64 ce_crm_debug_mux; /* 0x004050 */
- u64 ce_pad_004058; /* 0x004058 */
- u64 ce_crm_ssp_err_cmd_wrd; /* 0x004060 */
- u64 ce_crm_ssp_err_addr; /* 0x004068 */
- u64 ce_crm_ssp_err_syn; /* 0x004070 */
-
- u64 ce_pad_004078[499]; /* 0x004078 -- 0x005008 */
-
- /*
- * CXM: Coretalk Xmit Module Registers
- */
- u64 ce_cxm_dyn_credit_status; /* 0x005010 */
- u64 ce_cxm_last_credit_status; /* 0x005018 */
- u64 ce_cxm_credit_limit; /* 0x005020 */
- u64 ce_cxm_force_credit; /* 0x005028 */
- u64 ce_cxm_disable_bypass; /* 0x005030 */
- u64 ce_pad_005038[3]; /* 0x005038 -- 0x005048 */
- u64 ce_cxm_debug_mux; /* 0x005050 */
-
- u64 ce_pad_005058[501]; /* 0x005058 -- 0x005FF8 */
-
- /*
- * DTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
- * DTL: Link#1 MMRs at start at 0x006000, Link#2 MMRs at 0x008000
- * DTL: the comment offsets at far right: let 'y' = {6 or 8}
- *
- * UTL: Downstream Transaction Layer Regs (Link#1 and Link#2)
- * UTL: Link#1 MMRs at start at 0x007000, Link#2 MMRs at 0x009000
- * UTL: the comment offsets at far right: let 'z' = {7 or 9}
- */
- #define ce_dtl(link_num) ce_dtl_utl[link_num-1]
- #define ce_utl(link_num) ce_dtl_utl[link_num-1]
- struct ce_dtl_utl_reg {
- /* DTL */
- u64 ce_dtl_dtdr_credit_limit; /* 0x00y000 */
- u64 ce_dtl_dtdr_credit_force; /* 0x00y008 */
- u64 ce_dtl_dyn_credit_status; /* 0x00y010 */
- u64 ce_dtl_dtl_last_credit_stat; /* 0x00y018 */
- u64 ce_dtl_dtl_ctrl; /* 0x00y020 */
- u64 ce_pad_00y028[5]; /* 0x00y028 -- 0x00y048 */
- u64 ce_dtl_debug_sel; /* 0x00y050 */
- u64 ce_pad_00y058[501]; /* 0x00y058 -- 0x00yFF8 */
-
- /* UTL */
- u64 ce_utl_utl_ctrl; /* 0x00z000 */
- u64 ce_utl_debug_sel; /* 0x00z008 */
- u64 ce_pad_00z010[510]; /* 0x00z010 -- 0x00zFF8 */
- } ce_dtl_utl[2];
-
- u64 ce_pad_00A000[514]; /* 0x00A000 -- 0x00B008 */
-
- /*
- * URE: Upstream Request Engine
- */
- u64 ce_ure_dyn_credit_status; /* 0x00B010 */
- u64 ce_ure_last_credit_status; /* 0x00B018 */
- u64 ce_ure_credit_limit; /* 0x00B020 */
- u64 ce_pad_00B028; /* 0x00B028 */
- u64 ce_ure_control; /* 0x00B030 */
- u64 ce_ure_status; /* 0x00B038 */
- u64 ce_pad_00B040[2]; /* 0x00B040 -- 0x00B048 */
- u64 ce_ure_debug_sel; /* 0x00B050 */
- u64 ce_ure_pcie_debug_sel; /* 0x00B058 */
- u64 ce_ure_ssp_err_cmd_wrd; /* 0x00B060 */
- u64 ce_ure_ssp_err_addr; /* 0x00B068 */
- u64 ce_ure_page_map; /* 0x00B070 */
- u64 ce_ure_dir_map[TIOCE_NUM_PORTS]; /* 0x00B078 */
- u64 ce_ure_pipe_sel1; /* 0x00B088 */
- u64 ce_ure_pipe_mask1; /* 0x00B090 */
- u64 ce_ure_pipe_sel2; /* 0x00B098 */
- u64 ce_ure_pipe_mask2; /* 0x00B0A0 */
- u64 ce_ure_pcie1_credits_sent; /* 0x00B0A8 */
- u64 ce_ure_pcie1_credits_used; /* 0x00B0B0 */
- u64 ce_ure_pcie1_credit_limit; /* 0x00B0B8 */
- u64 ce_ure_pcie2_credits_sent; /* 0x00B0C0 */
- u64 ce_ure_pcie2_credits_used; /* 0x00B0C8 */
- u64 ce_ure_pcie2_credit_limit; /* 0x00B0D0 */
- u64 ce_ure_pcie_force_credit; /* 0x00B0D8 */
- u64 ce_ure_rd_tnum_val; /* 0x00B0E0 */
- u64 ce_ure_rd_tnum_rsp_rcvd; /* 0x00B0E8 */
- u64 ce_ure_rd_tnum_esent_timer; /* 0x00B0F0 */
- u64 ce_ure_rd_tnum_error; /* 0x00B0F8 */
- u64 ce_ure_rd_tnum_first_cl; /* 0x00B100 */
- u64 ce_ure_rd_tnum_link_buf; /* 0x00B108 */
- u64 ce_ure_wr_tnum_val; /* 0x00B110 */
- u64 ce_ure_sram_err_addr0; /* 0x00B118 */
- u64 ce_ure_sram_err_addr1; /* 0x00B120 */
- u64 ce_ure_sram_err_addr2; /* 0x00B128 */
- u64 ce_ure_sram_rd_addr0; /* 0x00B130 */
- u64 ce_ure_sram_rd_addr1; /* 0x00B138 */
- u64 ce_ure_sram_rd_addr2; /* 0x00B140 */
- u64 ce_ure_sram_wr_addr0; /* 0x00B148 */
- u64 ce_ure_sram_wr_addr1; /* 0x00B150 */
- u64 ce_ure_sram_wr_addr2; /* 0x00B158 */
- u64 ce_ure_buf_flush10; /* 0x00B160 */
- u64 ce_ure_buf_flush11; /* 0x00B168 */
- u64 ce_ure_buf_flush12; /* 0x00B170 */
- u64 ce_ure_buf_flush13; /* 0x00B178 */
- u64 ce_ure_buf_flush20; /* 0x00B180 */
- u64 ce_ure_buf_flush21; /* 0x00B188 */
- u64 ce_ure_buf_flush22; /* 0x00B190 */
- u64 ce_ure_buf_flush23; /* 0x00B198 */
- u64 ce_ure_pcie_control1; /* 0x00B1A0 */
- u64 ce_ure_pcie_control2; /* 0x00B1A8 */
-
- u64 ce_pad_00B1B0[458]; /* 0x00B1B0 -- 0x00BFF8 */
-
- /* Upstream Data Buffer, Port1 */
- struct ce_ure_maint_ups_dat1_data {
- u64 data63_0[512]; /* 0x00C000 -- 0x00CFF8 */
- u64 data127_64[512]; /* 0x00D000 -- 0x00DFF8 */
- u64 parity[512]; /* 0x00E000 -- 0x00EFF8 */
- } ce_ure_maint_ups_dat1;
-
- /* Upstream Header Buffer, Port1 */
- struct ce_ure_maint_ups_hdr1_data {
- u64 data63_0[512]; /* 0x00F000 -- 0x00FFF8 */
- u64 data127_64[512]; /* 0x010000 -- 0x010FF8 */
- u64 parity[512]; /* 0x011000 -- 0x011FF8 */
- } ce_ure_maint_ups_hdr1;
-
- /* Upstream Data Buffer, Port2 */
- struct ce_ure_maint_ups_dat2_data {
- u64 data63_0[512]; /* 0x012000 -- 0x012FF8 */
- u64 data127_64[512]; /* 0x013000 -- 0x013FF8 */
- u64 parity[512]; /* 0x014000 -- 0x014FF8 */
- } ce_ure_maint_ups_dat2;
-
- /* Upstream Header Buffer, Port2 */
- struct ce_ure_maint_ups_hdr2_data {
- u64 data63_0[512]; /* 0x015000 -- 0x015FF8 */
- u64 data127_64[512]; /* 0x016000 -- 0x016FF8 */
- u64 parity[512]; /* 0x017000 -- 0x017FF8 */
- } ce_ure_maint_ups_hdr2;
-
- /* Downstream Data Buffer */
- struct ce_ure_maint_dns_dat_data {
- u64 data63_0[512]; /* 0x018000 -- 0x018FF8 */
- u64 data127_64[512]; /* 0x019000 -- 0x019FF8 */
- u64 parity[512]; /* 0x01A000 -- 0x01AFF8 */
- } ce_ure_maint_dns_dat;
-
- /* Downstream Header Buffer */
- struct ce_ure_maint_dns_hdr_data {
- u64 data31_0[64]; /* 0x01B000 -- 0x01B1F8 */
- u64 data95_32[64]; /* 0x01B200 -- 0x01B3F8 */
- u64 parity[64]; /* 0x01B400 -- 0x01B5F8 */
- } ce_ure_maint_dns_hdr;
-
- /* RCI Buffer Data */
- struct ce_ure_maint_rci_data {
- u64 data41_0[64]; /* 0x01B600 -- 0x01B7F8 */
- u64 data69_42[64]; /* 0x01B800 -- 0x01B9F8 */
- } ce_ure_maint_rci;
-
- /* Response Queue */
- u64 ce_ure_maint_rspq[64]; /* 0x01BA00 -- 0x01BBF8 */
-
- u64 ce_pad_01C000[4224]; /* 0x01BC00 -- 0x023FF8 */
-
- /* Admin Build-a-Packet Buffer */
- struct ce_adm_maint_bap_buf_data {
- u64 data63_0[258]; /* 0x024000 -- 0x024808 */
- u64 data127_64[258]; /* 0x024810 -- 0x025018 */
- u64 parity[258]; /* 0x025020 -- 0x025828 */
- } ce_adm_maint_bap_buf;
-
- u64 ce_pad_025830[5370]; /* 0x025830 -- 0x02FFF8 */
-
- /* URE: 40bit PMU ATE Buffer */ /* 0x030000 -- 0x037FF8 */
- u64 ce_ure_ate40[TIOCE_NUM_M40_ATES];
-
- /* URE: 32/40bit PMU ATE Buffer */ /* 0x038000 -- 0x03BFF8 */
- u64 ce_ure_ate3240[TIOCE_NUM_M3240_ATES];
-
- u64 ce_pad_03C000[2050]; /* 0x03C000 -- 0x040008 */
-
- /*
- * DRE: Down Stream Request Engine
- */
- u64 ce_dre_dyn_credit_status1; /* 0x040010 */
- u64 ce_dre_dyn_credit_status2; /* 0x040018 */
- u64 ce_dre_last_credit_status1; /* 0x040020 */
- u64 ce_dre_last_credit_status2; /* 0x040028 */
- u64 ce_dre_credit_limit1; /* 0x040030 */
- u64 ce_dre_credit_limit2; /* 0x040038 */
- u64 ce_dre_force_credit1; /* 0x040040 */
- u64 ce_dre_force_credit2; /* 0x040048 */
- u64 ce_dre_debug_mux1; /* 0x040050 */
- u64 ce_dre_debug_mux2; /* 0x040058 */
- u64 ce_dre_ssp_err_cmd_wrd; /* 0x040060 */
- u64 ce_dre_ssp_err_addr; /* 0x040068 */
- u64 ce_dre_comp_err_cmd_wrd; /* 0x040070 */
- u64 ce_dre_comp_err_addr; /* 0x040078 */
- u64 ce_dre_req_status; /* 0x040080 */
- u64 ce_dre_config1; /* 0x040088 */
- u64 ce_dre_config2; /* 0x040090 */
- u64 ce_dre_config_req_status; /* 0x040098 */
- u64 ce_pad_0400A0[12]; /* 0x0400A0 -- 0x0400F8 */
- u64 ce_dre_dyn_fifo; /* 0x040100 */
- u64 ce_pad_040108[3]; /* 0x040108 -- 0x040118 */
- u64 ce_dre_last_fifo; /* 0x040120 */
-
- u64 ce_pad_040128[27]; /* 0x040128 -- 0x0401F8 */
-
- /* DRE Downstream Head Queue */
- struct ce_dre_maint_ds_head_queue {
- u64 data63_0[32]; /* 0x040200 -- 0x0402F8 */
- u64 data127_64[32]; /* 0x040300 -- 0x0403F8 */
- u64 parity[32]; /* 0x040400 -- 0x0404F8 */
- } ce_dre_maint_ds_head_q;
-
- u64 ce_pad_040500[352]; /* 0x040500 -- 0x040FF8 */
-
- /* DRE Downstream Data Queue */
- struct ce_dre_maint_ds_data_queue {
- u64 data63_0[256]; /* 0x041000 -- 0x0417F8 */
- u64 ce_pad_041800[256]; /* 0x041800 -- 0x041FF8 */
- u64 data127_64[256]; /* 0x042000 -- 0x0427F8 */
- u64 ce_pad_042800[256]; /* 0x042800 -- 0x042FF8 */
- u64 parity[256]; /* 0x043000 -- 0x0437F8 */
- u64 ce_pad_043800[256]; /* 0x043800 -- 0x043FF8 */
- } ce_dre_maint_ds_data_q;
-
- /* DRE URE Upstream Response Queue */
- struct ce_dre_maint_ure_us_rsp_queue {
- u64 data63_0[8]; /* 0x044000 -- 0x044038 */
- u64 ce_pad_044040[24]; /* 0x044040 -- 0x0440F8 */
- u64 data127_64[8]; /* 0x044100 -- 0x044138 */
- u64 ce_pad_044140[24]; /* 0x044140 -- 0x0441F8 */
- u64 parity[8]; /* 0x044200 -- 0x044238 */
- u64 ce_pad_044240[24]; /* 0x044240 -- 0x0442F8 */
- } ce_dre_maint_ure_us_rsp_q;
-
- u64 ce_dre_maint_us_wrt_rsp[32];/* 0x044300 -- 0x0443F8 */
-
- u64 ce_end_of_struct; /* 0x044400 */
-} tioce_t;
-
-/* ce_lsiX_gb_cfg1 register bit masks & shifts */
-#define CE_LSI_GB_CFG1_RXL0S_THS_SHFT 0
-#define CE_LSI_GB_CFG1_RXL0S_THS_MASK (0xffULL << 0)
-#define CE_LSI_GB_CFG1_RXL0S_SMP_SHFT 8
-#define CE_LSI_GB_CFG1_RXL0S_SMP_MASK (0xfULL << 8)
-#define CE_LSI_GB_CFG1_RXL0S_ADJ_SHFT 12
-#define CE_LSI_GB_CFG1_RXL0S_ADJ_MASK (0x7ULL << 12)
-#define CE_LSI_GB_CFG1_RXL0S_FLT_SHFT 15
-#define CE_LSI_GB_CFG1_RXL0S_FLT_MASK (0x1ULL << 15)
-#define CE_LSI_GB_CFG1_LPBK_SEL_SHFT 16
-#define CE_LSI_GB_CFG1_LPBK_SEL_MASK (0x3ULL << 16)
-#define CE_LSI_GB_CFG1_LPBK_EN_SHFT 18
-#define CE_LSI_GB_CFG1_LPBK_EN_MASK (0x1ULL << 18)
-#define CE_LSI_GB_CFG1_RVRS_LB_SHFT 19
-#define CE_LSI_GB_CFG1_RVRS_LB_MASK (0x1ULL << 19)
-#define CE_LSI_GB_CFG1_RVRS_CLK_SHFT 20
-#define CE_LSI_GB_CFG1_RVRS_CLK_MASK (0x3ULL << 20)
-#define CE_LSI_GB_CFG1_SLF_TS_SHFT 24
-#define CE_LSI_GB_CFG1_SLF_TS_MASK (0xfULL << 24)
-
-/* ce_adm_int_mask/ce_adm_int_status register bit defines */
-#define CE_ADM_INT_CE_ERROR_SHFT 0
-#define CE_ADM_INT_LSI1_IP_ERROR_SHFT 1
-#define CE_ADM_INT_LSI2_IP_ERROR_SHFT 2
-#define CE_ADM_INT_PCIE_ERROR_SHFT 3
-#define CE_ADM_INT_PORT1_HOTPLUG_EVENT_SHFT 4
-#define CE_ADM_INT_PORT2_HOTPLUG_EVENT_SHFT 5
-#define CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT 6
-#define CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT 7
-#define CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT 8
-#define CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT 9
-#define CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT 10
-#define CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT 11
-#define CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT 12
-#define CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT 13
-#define CE_ADM_INT_PCIE_MSG_SHFT 14 /*see int_dest_14*/
-#define CE_ADM_INT_PCIE_MSG_SLOT_0_SHFT 14
-#define CE_ADM_INT_PCIE_MSG_SLOT_1_SHFT 15
-#define CE_ADM_INT_PCIE_MSG_SLOT_2_SHFT 16
-#define CE_ADM_INT_PCIE_MSG_SLOT_3_SHFT 17
-#define CE_ADM_INT_PORT1_PM_PME_MSG_SHFT 22
-#define CE_ADM_INT_PORT2_PM_PME_MSG_SHFT 23
-
-/* ce_adm_force_int register bit defines */
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT 0
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT 1
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT 2
-#define CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT 3
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT 4
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT 5
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT 6
-#define CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT 7
-#define CE_ADM_FORCE_INT_ALWAYS_SHFT 8
-
-/* ce_adm_int_dest register bit masks & shifts */
-#define INTR_VECTOR_SHFT 56
-
-/* ce_adm_error_mask and ce_adm_error_summary register bit masks */
-#define CE_ADM_ERR_CRM_SSP_REQ_INVALID (0x1ULL << 0)
-#define CE_ADM_ERR_SSP_REQ_HEADER (0x1ULL << 1)
-#define CE_ADM_ERR_SSP_RSP_HEADER (0x1ULL << 2)
-#define CE_ADM_ERR_SSP_PROTOCOL_ERROR (0x1ULL << 3)
-#define CE_ADM_ERR_SSP_SBE (0x1ULL << 4)
-#define CE_ADM_ERR_SSP_MBE (0x1ULL << 5)
-#define CE_ADM_ERR_CXM_CREDIT_OFLOW (0x1ULL << 6)
-#define CE_ADM_ERR_DRE_SSP_REQ_INVAL (0x1ULL << 7)
-#define CE_ADM_ERR_SSP_REQ_LONG (0x1ULL << 8)
-#define CE_ADM_ERR_SSP_REQ_OFLOW (0x1ULL << 9)
-#define CE_ADM_ERR_SSP_REQ_SHORT (0x1ULL << 10)
-#define CE_ADM_ERR_SSP_REQ_SIDEBAND (0x1ULL << 11)
-#define CE_ADM_ERR_SSP_REQ_ADDR_ERR (0x1ULL << 12)
-#define CE_ADM_ERR_SSP_REQ_BAD_BE (0x1ULL << 13)
-#define CE_ADM_ERR_PCIE_COMPL_TIMEOUT (0x1ULL << 14)
-#define CE_ADM_ERR_PCIE_UNEXP_COMPL (0x1ULL << 15)
-#define CE_ADM_ERR_PCIE_ERR_COMPL (0x1ULL << 16)
-#define CE_ADM_ERR_DRE_CREDIT_OFLOW (0x1ULL << 17)
-#define CE_ADM_ERR_DRE_SRAM_PE (0x1ULL << 18)
-#define CE_ADM_ERR_SSP_RSP_INVALID (0x1ULL << 19)
-#define CE_ADM_ERR_SSP_RSP_LONG (0x1ULL << 20)
-#define CE_ADM_ERR_SSP_RSP_SHORT (0x1ULL << 21)
-#define CE_ADM_ERR_SSP_RSP_SIDEBAND (0x1ULL << 22)
-#define CE_ADM_ERR_URE_SSP_RSP_UNEXP (0x1ULL << 23)
-#define CE_ADM_ERR_URE_SSP_WR_REQ_TIMEOUT (0x1ULL << 24)
-#define CE_ADM_ERR_URE_SSP_RD_REQ_TIMEOUT (0x1ULL << 25)
-#define CE_ADM_ERR_URE_ATE3240_PAGE_FAULT (0x1ULL << 26)
-#define CE_ADM_ERR_URE_ATE40_PAGE_FAULT (0x1ULL << 27)
-#define CE_ADM_ERR_URE_CREDIT_OFLOW (0x1ULL << 28)
-#define CE_ADM_ERR_URE_SRAM_PE (0x1ULL << 29)
-#define CE_ADM_ERR_ADM_SSP_RSP_UNEXP (0x1ULL << 30)
-#define CE_ADM_ERR_ADM_SSP_REQ_TIMEOUT (0x1ULL << 31)
-#define CE_ADM_ERR_MMR_ACCESS_ERROR (0x1ULL << 32)
-#define CE_ADM_ERR_MMR_ADDR_ERROR (0x1ULL << 33)
-#define CE_ADM_ERR_ADM_CREDIT_OFLOW (0x1ULL << 34)
-#define CE_ADM_ERR_ADM_SRAM_PE (0x1ULL << 35)
-#define CE_ADM_ERR_DTL1_MIN_PDATA_CREDIT_ERR (0x1ULL << 36)
-#define CE_ADM_ERR_DTL1_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 37)
-#define CE_ADM_ERR_DTL1_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 38)
-#define CE_ADM_ERR_DTL1_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 39)
-#define CE_ADM_ERR_DTL1_COMP_HD_CRED_MAX_ERR (0x1ULL << 40)
-#define CE_ADM_ERR_DTL1_COMP_D_CRED_MAX_ERR (0x1ULL << 41)
-#define CE_ADM_ERR_DTL1_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 42)
-#define CE_ADM_ERR_DTL1_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 43)
-#define CE_ADM_ERR_DTL1_POSTED_HD_CRED_MAX_ERR (0x1ULL << 44)
-#define CE_ADM_ERR_DTL1_POSTED_D_CRED_MAX_ERR (0x1ULL << 45)
-#define CE_ADM_ERR_DTL2_MIN_PDATA_CREDIT_ERR (0x1ULL << 46)
-#define CE_ADM_ERR_DTL2_INF_COMPL_CRED_UPDT_ERR (0x1ULL << 47)
-#define CE_ADM_ERR_DTL2_INF_POSTED_CRED_UPDT_ERR (0x1ULL << 48)
-#define CE_ADM_ERR_DTL2_INF_NPOSTED_CRED_UPDT_ERR (0x1ULL << 49)
-#define CE_ADM_ERR_DTL2_COMP_HD_CRED_MAX_ERR (0x1ULL << 50)
-#define CE_ADM_ERR_DTL2_COMP_D_CRED_MAX_ERR (0x1ULL << 51)
-#define CE_ADM_ERR_DTL2_NPOSTED_HD_CRED_MAX_ERR (0x1ULL << 52)
-#define CE_ADM_ERR_DTL2_NPOSTED_D_CRED_MAX_ERR (0x1ULL << 53)
-#define CE_ADM_ERR_DTL2_POSTED_HD_CRED_MAX_ERR (0x1ULL << 54)
-#define CE_ADM_ERR_DTL2_POSTED_D_CRED_MAX_ERR (0x1ULL << 55)
-#define CE_ADM_ERR_PORT1_PCIE_COR_ERR (0x1ULL << 56)
-#define CE_ADM_ERR_PORT1_PCIE_NFAT_ERR (0x1ULL << 57)
-#define CE_ADM_ERR_PORT1_PCIE_FAT_ERR (0x1ULL << 58)
-#define CE_ADM_ERR_PORT2_PCIE_COR_ERR (0x1ULL << 59)
-#define CE_ADM_ERR_PORT2_PCIE_NFAT_ERR (0x1ULL << 60)
-#define CE_ADM_ERR_PORT2_PCIE_FAT_ERR (0x1ULL << 61)
-
-/* ce_adm_ure_ups_buf_barrier_flush register bit masks and shifts */
-#define FLUSH_SEL_PORT1_PIPE0_SHFT 0
-#define FLUSH_SEL_PORT1_PIPE1_SHFT 4
-#define FLUSH_SEL_PORT1_PIPE2_SHFT 8
-#define FLUSH_SEL_PORT1_PIPE3_SHFT 12
-#define FLUSH_SEL_PORT2_PIPE0_SHFT 16
-#define FLUSH_SEL_PORT2_PIPE1_SHFT 20
-#define FLUSH_SEL_PORT2_PIPE2_SHFT 24
-#define FLUSH_SEL_PORT2_PIPE3_SHFT 28
-
-/* ce_dre_config1 register bit masks and shifts */
-#define CE_DRE_RO_ENABLE (0x1ULL << 0)
-#define CE_DRE_DYN_RO_ENABLE (0x1ULL << 1)
-#define CE_DRE_SUP_CONFIG_COMP_ERROR (0x1ULL << 2)
-#define CE_DRE_SUP_IO_COMP_ERROR (0x1ULL << 3)
-#define CE_DRE_ADDR_MODE_SHFT 4
-
-/* ce_dre_config_req_status register bit masks */
-#define CE_DRE_LAST_CONFIG_COMPLETION (0x7ULL << 0)
-#define CE_DRE_DOWNSTREAM_CONFIG_ERROR (0x1ULL << 3)
-#define CE_DRE_CONFIG_COMPLETION_VALID (0x1ULL << 4)
-#define CE_DRE_CONFIG_REQUEST_ACTIVE (0x1ULL << 5)
-
-/* ce_ure_control register bit masks & shifts */
-#define CE_URE_RD_MRG_ENABLE (0x1ULL << 0)
-#define CE_URE_WRT_MRG_ENABLE1 (0x1ULL << 4)
-#define CE_URE_WRT_MRG_ENABLE2 (0x1ULL << 5)
-#define CE_URE_WRT_MRG_TIMER_SHFT 12
-#define CE_URE_WRT_MRG_TIMER_MASK (0x7FFULL << CE_URE_WRT_MRG_TIMER_SHFT)
-#define CE_URE_WRT_MRG_TIMER(x) (((u64)(x) << \
- CE_URE_WRT_MRG_TIMER_SHFT) & \
- CE_URE_WRT_MRG_TIMER_MASK)
-#define CE_URE_RSPQ_BYPASS_DISABLE (0x1ULL << 24)
-#define CE_URE_UPS_DAT1_PAR_DISABLE (0x1ULL << 32)
-#define CE_URE_UPS_HDR1_PAR_DISABLE (0x1ULL << 33)
-#define CE_URE_UPS_DAT2_PAR_DISABLE (0x1ULL << 34)
-#define CE_URE_UPS_HDR2_PAR_DISABLE (0x1ULL << 35)
-#define CE_URE_ATE_PAR_DISABLE (0x1ULL << 36)
-#define CE_URE_RCI_PAR_DISABLE (0x1ULL << 37)
-#define CE_URE_RSPQ_PAR_DISABLE (0x1ULL << 38)
-#define CE_URE_DNS_DAT_PAR_DISABLE (0x1ULL << 39)
-#define CE_URE_DNS_HDR_PAR_DISABLE (0x1ULL << 40)
-#define CE_URE_MALFORM_DISABLE (0x1ULL << 44)
-#define CE_URE_UNSUP_DISABLE (0x1ULL << 45)
-
-/* ce_ure_page_map register bit masks & shifts */
-#define CE_URE_ATE3240_ENABLE (0x1ULL << 0)
-#define CE_URE_ATE40_ENABLE (0x1ULL << 1)
-#define CE_URE_PAGESIZE_SHFT 4
-#define CE_URE_PAGESIZE_MASK (0x7ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_4K_PAGESIZE (0x0ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_16K_PAGESIZE (0x1ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_64K_PAGESIZE (0x2ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_128K_PAGESIZE (0x3ULL << CE_URE_PAGESIZE_SHFT)
-#define CE_URE_256K_PAGESIZE (0x4ULL << CE_URE_PAGESIZE_SHFT)
-
-/* ce_ure_pipe_sel register bit masks & shifts */
-#define PKT_TRAFIC_SHRT 16
-#define BUS_SRC_ID_SHFT 8
-#define DEV_SRC_ID_SHFT 3
-#define FNC_SRC_ID_SHFT 0
-#define CE_URE_TC_MASK (0x07ULL << PKT_TRAFIC_SHRT)
-#define CE_URE_BUS_MASK (0xFFULL << BUS_SRC_ID_SHFT)
-#define CE_URE_DEV_MASK (0x1FULL << DEV_SRC_ID_SHFT)
-#define CE_URE_FNC_MASK (0x07ULL << FNC_SRC_ID_SHFT)
-#define CE_URE_PIPE_BUS(b) (((u64)(b) << BUS_SRC_ID_SHFT) & \
- CE_URE_BUS_MASK)
-#define CE_URE_PIPE_DEV(d) (((u64)(d) << DEV_SRC_ID_SHFT) & \
- CE_URE_DEV_MASK)
-#define CE_URE_PIPE_FNC(f) (((u64)(f) << FNC_SRC_ID_SHFT) & \
- CE_URE_FNC_MASK)
-
-#define CE_URE_SEL1_SHFT 0
-#define CE_URE_SEL2_SHFT 20
-#define CE_URE_SEL3_SHFT 40
-#define CE_URE_SEL1_MASK (0x7FFFFULL << CE_URE_SEL1_SHFT)
-#define CE_URE_SEL2_MASK (0x7FFFFULL << CE_URE_SEL2_SHFT)
-#define CE_URE_SEL3_MASK (0x7FFFFULL << CE_URE_SEL3_SHFT)
-
-
-/* ce_ure_pipe_mask register bit masks & shifts */
-#define CE_URE_MASK1_SHFT 0
-#define CE_URE_MASK2_SHFT 20
-#define CE_URE_MASK3_SHFT 40
-#define CE_URE_MASK1_MASK (0x7FFFFULL << CE_URE_MASK1_SHFT)
-#define CE_URE_MASK2_MASK (0x7FFFFULL << CE_URE_MASK2_SHFT)
-#define CE_URE_MASK3_MASK (0x7FFFFULL << CE_URE_MASK3_SHFT)
-
-
-/* ce_ure_pcie_control1 register bit masks & shifts */
-#define CE_URE_SI (0x1ULL << 0)
-#define CE_URE_ELAL_SHFT 4
-#define CE_URE_ELAL_MASK (0x7ULL << CE_URE_ELAL_SHFT)
-#define CE_URE_ELAL_SET(n) (((u64)(n) << CE_URE_ELAL_SHFT) & \
- CE_URE_ELAL_MASK)
-#define CE_URE_ELAL1_SHFT 8
-#define CE_URE_ELAL1_MASK (0x7ULL << CE_URE_ELAL1_SHFT)
-#define CE_URE_ELAL1_SET(n) (((u64)(n) << CE_URE_ELAL1_SHFT) & \
- CE_URE_ELAL1_MASK)
-#define CE_URE_SCC (0x1ULL << 12)
-#define CE_URE_PN1_SHFT 16
-#define CE_URE_PN1_MASK (0xFFULL << CE_URE_PN1_SHFT)
-#define CE_URE_PN2_SHFT 24
-#define CE_URE_PN2_MASK (0xFFULL << CE_URE_PN2_SHFT)
-#define CE_URE_PN1_SET(n) (((u64)(n) << CE_URE_PN1_SHFT) & \
- CE_URE_PN1_MASK)
-#define CE_URE_PN2_SET(n) (((u64)(n) << CE_URE_PN2_SHFT) & \
- CE_URE_PN2_MASK)
-
-/* ce_ure_pcie_control2 register bit masks & shifts */
-#define CE_URE_ABP (0x1ULL << 0)
-#define CE_URE_PCP (0x1ULL << 1)
-#define CE_URE_MSP (0x1ULL << 2)
-#define CE_URE_AIP (0x1ULL << 3)
-#define CE_URE_PIP (0x1ULL << 4)
-#define CE_URE_HPS (0x1ULL << 5)
-#define CE_URE_HPC (0x1ULL << 6)
-#define CE_URE_SPLV_SHFT 7
-#define CE_URE_SPLV_MASK (0xFFULL << CE_URE_SPLV_SHFT)
-#define CE_URE_SPLV_SET(n) (((u64)(n) << CE_URE_SPLV_SHFT) & \
- CE_URE_SPLV_MASK)
-#define CE_URE_SPLS_SHFT 15
-#define CE_URE_SPLS_MASK (0x3ULL << CE_URE_SPLS_SHFT)
-#define CE_URE_SPLS_SET(n) (((u64)(n) << CE_URE_SPLS_SHFT) & \
- CE_URE_SPLS_MASK)
-#define CE_URE_PSN1_SHFT 19
-#define CE_URE_PSN1_MASK (0x1FFFULL << CE_URE_PSN1_SHFT)
-#define CE_URE_PSN2_SHFT 32
-#define CE_URE_PSN2_MASK (0x1FFFULL << CE_URE_PSN2_SHFT)
-#define CE_URE_PSN1_SET(n) (((u64)(n) << CE_URE_PSN1_SHFT) & \
- CE_URE_PSN1_MASK)
-#define CE_URE_PSN2_SET(n) (((u64)(n) << CE_URE_PSN2_SHFT) & \
- CE_URE_PSN2_MASK)
-
-/*
- * PIO address space ranges for CE
- */
-
-/* Local CE Registers Space */
-#define CE_PIO_MMR 0x00000000
-#define CE_PIO_MMR_LEN 0x04000000
-
-/* PCI Compatible Config Space */
-#define CE_PIO_CONFIG_SPACE 0x04000000
-#define CE_PIO_CONFIG_SPACE_LEN 0x04000000
-
-/* PCI I/O Space Alias */
-#define CE_PIO_IO_SPACE_ALIAS 0x08000000
-#define CE_PIO_IO_SPACE_ALIAS_LEN 0x08000000
-
-/* PCI Enhanced Config Space */
-#define CE_PIO_E_CONFIG_SPACE 0x10000000
-#define CE_PIO_E_CONFIG_SPACE_LEN 0x10000000
-
-/* PCI I/O Space */
-#define CE_PIO_IO_SPACE 0x100000000
-#define CE_PIO_IO_SPACE_LEN 0x100000000
-
-/* PCI MEM Space */
-#define CE_PIO_MEM_SPACE 0x200000000
-#define CE_PIO_MEM_SPACE_LEN TIO_HWIN_SIZE
-
-
-/*
- * CE PCI Enhanced Config Space shifts & masks
- */
-#define CE_E_CONFIG_BUS_SHFT 20
-#define CE_E_CONFIG_BUS_MASK (0xFF << CE_E_CONFIG_BUS_SHFT)
-#define CE_E_CONFIG_DEVICE_SHFT 15
-#define CE_E_CONFIG_DEVICE_MASK (0x1F << CE_E_CONFIG_DEVICE_SHFT)
-#define CE_E_CONFIG_FUNC_SHFT 12
-#define CE_E_CONFIG_FUNC_MASK (0x7 << CE_E_CONFIG_FUNC_SHFT)
-
-#endif /* __ASM_IA64_SN_TIOCE_H__ */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_CE_PROVIDER_H
-#define _ASM_IA64_SN_CE_PROVIDER_H
-
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/tioce.h>
-
-/*
- * Common TIOCE structure shared between the prom and kernel
- *
- * DO NOT CHANGE THIS STRUCT WITHOUT MAKING CORRESPONDING CHANGES TO THE
- * PROM VERSION.
- */
-struct tioce_common {
- struct pcibus_bussoft ce_pcibus; /* common pciio header */
-
- u32 ce_rev;
- u64 ce_kernel_private;
- u64 ce_prom_private;
-};
-
-struct tioce_kernel {
- struct tioce_common *ce_common;
- spinlock_t ce_lock;
- struct list_head ce_dmamap_list;
-
- u64 ce_ate40_shadow[TIOCE_NUM_M40_ATES];
- u64 ce_ate3240_shadow[TIOCE_NUM_M3240_ATES];
- u32 ce_ate3240_pagesize;
-
- u8 ce_port1_secondary;
-
- /* per-port resources */
- struct {
- int dirmap_refcnt;
- u64 dirmap_shadow;
- } ce_port[TIOCE_NUM_PORTS];
-};
-
-struct tioce_dmamap {
- struct list_head ce_dmamap_list; /* headed by tioce_kernel */
- u32 refcnt;
-
- u64 nbytes; /* # bytes mapped */
-
- u64 ct_start; /* coretalk start address */
- u64 pci_start; /* bus start address */
-
- u64 __iomem *ate_hw;/* hw ptr of first ate in map */
- u64 *ate_shadow; /* shadow ptr of firat ate */
- u16 ate_count; /* # ate's in the map */
-};
-
-extern int tioce_init_provider(void);
-
-#endif /* __ASM_IA64_SN_CE_PROVIDER_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_PCI_TIOCP_H
-#define _ASM_IA64_SN_PCI_TIOCP_H
-
-#define TIOCP_HOST_INTR_ADDR 0x003FFFFFFFFFFFFFUL
-#define TIOCP_PCI64_CMDTYPE_MEM (0x1ull << 60)
-#define TIOCP_PCI64_CMDTYPE_MSI (0x3ull << 60)
-
-
-/*****************************************************************************
- *********************** TIOCP MMR structure mapping ***************************
- *****************************************************************************/
-
-struct tiocp{
-
- /* 0x000000-0x00FFFF -- Local Registers */
-
- /* 0x000000-0x000057 -- (Legacy Widget Space) Configuration */
- u64 cp_id; /* 0x000000 */
- u64 cp_stat; /* 0x000008 */
- u64 cp_err_upper; /* 0x000010 */
- u64 cp_err_lower; /* 0x000018 */
- #define cp_err cp_err_lower
- u64 cp_control; /* 0x000020 */
- u64 cp_req_timeout; /* 0x000028 */
- u64 cp_intr_upper; /* 0x000030 */
- u64 cp_intr_lower; /* 0x000038 */
- #define cp_intr cp_intr_lower
- u64 cp_err_cmdword; /* 0x000040 */
- u64 _pad_000048; /* 0x000048 */
- u64 cp_tflush; /* 0x000050 */
-
- /* 0x000058-0x00007F -- Bridge-specific Configuration */
- u64 cp_aux_err; /* 0x000058 */
- u64 cp_resp_upper; /* 0x000060 */
- u64 cp_resp_lower; /* 0x000068 */
- #define cp_resp cp_resp_lower
- u64 cp_tst_pin_ctrl; /* 0x000070 */
- u64 cp_addr_lkerr; /* 0x000078 */
-
- /* 0x000080-0x00008F -- PMU & MAP */
- u64 cp_dir_map; /* 0x000080 */
- u64 _pad_000088; /* 0x000088 */
-
- /* 0x000090-0x00009F -- SSRAM */
- u64 cp_map_fault; /* 0x000090 */
- u64 _pad_000098; /* 0x000098 */
-
- /* 0x0000A0-0x0000AF -- Arbitration */
- u64 cp_arb; /* 0x0000A0 */
- u64 _pad_0000A8; /* 0x0000A8 */
-
- /* 0x0000B0-0x0000BF -- Number In A Can or ATE Parity Error */
- u64 cp_ate_parity_err; /* 0x0000B0 */
- u64 _pad_0000B8; /* 0x0000B8 */
-
- /* 0x0000C0-0x0000FF -- PCI/GIO */
- u64 cp_bus_timeout; /* 0x0000C0 */
- u64 cp_pci_cfg; /* 0x0000C8 */
- u64 cp_pci_err_upper; /* 0x0000D0 */
- u64 cp_pci_err_lower; /* 0x0000D8 */
- #define cp_pci_err cp_pci_err_lower
- u64 _pad_0000E0[4]; /* 0x0000{E0..F8} */
-
- /* 0x000100-0x0001FF -- Interrupt */
- u64 cp_int_status; /* 0x000100 */
- u64 cp_int_enable; /* 0x000108 */
- u64 cp_int_rst_stat; /* 0x000110 */
- u64 cp_int_mode; /* 0x000118 */
- u64 cp_int_device; /* 0x000120 */
- u64 cp_int_host_err; /* 0x000128 */
- u64 cp_int_addr[8]; /* 0x0001{30,,,68} */
- u64 cp_err_int_view; /* 0x000170 */
- u64 cp_mult_int; /* 0x000178 */
- u64 cp_force_always[8]; /* 0x0001{80,,,B8} */
- u64 cp_force_pin[8]; /* 0x0001{C0,,,F8} */
-
- /* 0x000200-0x000298 -- Device */
- u64 cp_device[4]; /* 0x0002{00,,,18} */
- u64 _pad_000220[4]; /* 0x0002{20,,,38} */
- u64 cp_wr_req_buf[4]; /* 0x0002{40,,,58} */
- u64 _pad_000260[4]; /* 0x0002{60,,,78} */
- u64 cp_rrb_map[2]; /* 0x0002{80,,,88} */
- #define cp_even_resp cp_rrb_map[0] /* 0x000280 */
- #define cp_odd_resp cp_rrb_map[1] /* 0x000288 */
- u64 cp_resp_status; /* 0x000290 */
- u64 cp_resp_clear; /* 0x000298 */
-
- u64 _pad_0002A0[12]; /* 0x0002{A0..F8} */
-
- /* 0x000300-0x0003F8 -- Buffer Address Match Registers */
- struct {
- u64 upper; /* 0x0003{00,,,F0} */
- u64 lower; /* 0x0003{08,,,F8} */
- } cp_buf_addr_match[16];
-
- /* 0x000400-0x0005FF -- Performance Monitor Registers (even only) */
- struct {
- u64 flush_w_touch; /* 0x000{400,,,5C0} */
- u64 flush_wo_touch; /* 0x000{408,,,5C8} */
- u64 inflight; /* 0x000{410,,,5D0} */
- u64 prefetch; /* 0x000{418,,,5D8} */
- u64 total_pci_retry; /* 0x000{420,,,5E0} */
- u64 max_pci_retry; /* 0x000{428,,,5E8} */
- u64 max_latency; /* 0x000{430,,,5F0} */
- u64 clear_all; /* 0x000{438,,,5F8} */
- } cp_buf_count[8];
-
-
- /* 0x000600-0x0009FF -- PCI/X registers */
- u64 cp_pcix_bus_err_addr; /* 0x000600 */
- u64 cp_pcix_bus_err_attr; /* 0x000608 */
- u64 cp_pcix_bus_err_data; /* 0x000610 */
- u64 cp_pcix_pio_split_addr; /* 0x000618 */
- u64 cp_pcix_pio_split_attr; /* 0x000620 */
- u64 cp_pcix_dma_req_err_attr; /* 0x000628 */
- u64 cp_pcix_dma_req_err_addr; /* 0x000630 */
- u64 cp_pcix_timeout; /* 0x000638 */
-
- u64 _pad_000640[24]; /* 0x000{640,,,6F8} */
-
- /* 0x000700-0x000737 -- Debug Registers */
- u64 cp_ct_debug_ctl; /* 0x000700 */
- u64 cp_br_debug_ctl; /* 0x000708 */
- u64 cp_mux3_debug_ctl; /* 0x000710 */
- u64 cp_mux4_debug_ctl; /* 0x000718 */
- u64 cp_mux5_debug_ctl; /* 0x000720 */
- u64 cp_mux6_debug_ctl; /* 0x000728 */
- u64 cp_mux7_debug_ctl; /* 0x000730 */
-
- u64 _pad_000738[89]; /* 0x000{738,,,9F8} */
-
- /* 0x000A00-0x000BFF -- PCI/X Read&Write Buffer */
- struct {
- u64 cp_buf_addr; /* 0x000{A00,,,AF0} */
- u64 cp_buf_attr; /* 0X000{A08,,,AF8} */
- } cp_pcix_read_buf_64[16];
-
- struct {
- u64 cp_buf_addr; /* 0x000{B00,,,BE0} */
- u64 cp_buf_attr; /* 0x000{B08,,,BE8} */
- u64 cp_buf_valid; /* 0x000{B10,,,BF0} */
- u64 __pad1; /* 0x000{B18,,,BF8} */
- } cp_pcix_write_buf_64[8];
-
- /* End of Local Registers -- Start of Address Map space */
-
- char _pad_000c00[0x010000 - 0x000c00];
-
- /* 0x010000-0x011FF8 -- Internal ATE RAM (Auto Parity Generation) */
- u64 cp_int_ate_ram[1024]; /* 0x010000-0x011FF8 */
-
- char _pad_012000[0x14000 - 0x012000];
-
- /* 0x014000-0x015FF8 -- Internal ATE RAM (Manual Parity Generation) */
- u64 cp_int_ate_ram_mp[1024]; /* 0x014000-0x015FF8 */
-
- char _pad_016000[0x18000 - 0x016000];
-
- /* 0x18000-0x197F8 -- TIOCP Write Request Ram */
- u64 cp_wr_req_lower[256]; /* 0x18000 - 0x187F8 */
- u64 cp_wr_req_upper[256]; /* 0x18800 - 0x18FF8 */
- u64 cp_wr_req_parity[256]; /* 0x19000 - 0x197F8 */
-
- char _pad_019800[0x1C000 - 0x019800];
-
- /* 0x1C000-0x1EFF8 -- TIOCP Read Response Ram */
- u64 cp_rd_resp_lower[512]; /* 0x1C000 - 0x1CFF8 */
- u64 cp_rd_resp_upper[512]; /* 0x1D000 - 0x1DFF8 */
- u64 cp_rd_resp_parity[512]; /* 0x1E000 - 0x1EFF8 */
-
- char _pad_01F000[0x20000 - 0x01F000];
-
- /* 0x020000-0x021FFF -- Host Device (CP) Configuration Space (not used) */
- char _pad_020000[0x021000 - 0x20000];
-
- /* 0x021000-0x027FFF -- PCI Device Configuration Spaces */
- union {
- u8 c[0x1000 / 1]; /* 0x02{0000,,,7FFF} */
- u16 s[0x1000 / 2]; /* 0x02{0000,,,7FFF} */
- u32 l[0x1000 / 4]; /* 0x02{0000,,,7FFF} */
- u64 d[0x1000 / 8]; /* 0x02{0000,,,7FFF} */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } cp_type0_cfg_dev[7]; /* 0x02{1000,,,7FFF} */
-
- /* 0x028000-0x028FFF -- PCI Type 1 Configuration Space */
- union {
- u8 c[0x1000 / 1]; /* 0x028000-0x029000 */
- u16 s[0x1000 / 2]; /* 0x028000-0x029000 */
- u32 l[0x1000 / 4]; /* 0x028000-0x029000 */
- u64 d[0x1000 / 8]; /* 0x028000-0x029000 */
- union {
- u8 c[0x100 / 1];
- u16 s[0x100 / 2];
- u32 l[0x100 / 4];
- u64 d[0x100 / 8];
- } f[8];
- } cp_type1_cfg; /* 0x028000-0x029000 */
-
- char _pad_029000[0x030000-0x029000];
-
- /* 0x030000-0x030007 -- PCI Interrupt Acknowledge Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } cp_pci_iack; /* 0x030000-0x030007 */
-
- char _pad_030007[0x040000-0x030008];
-
- /* 0x040000-0x040007 -- PCIX Special Cycle */
- union {
- u8 c[8 / 1];
- u16 s[8 / 2];
- u32 l[8 / 4];
- u64 d[8 / 8];
- } cp_pcix_cycle; /* 0x040000-0x040007 */
-
- char _pad_040007[0x200000-0x040008];
-
- /* 0x200000-0x7FFFFF -- PCI/GIO Device Spaces */
- union {
- u8 c[0x100000 / 1];
- u16 s[0x100000 / 2];
- u32 l[0x100000 / 4];
- u64 d[0x100000 / 8];
- } cp_devio_raw[6]; /* 0x200000-0x7FFFFF */
-
- #define cp_devio(n) cp_devio_raw[((n)<2)?(n*2):(n+2)]
-
- char _pad_800000[0xA00000-0x800000];
-
- /* 0xA00000-0xBFFFFF -- PCI/GIO Device Spaces w/flush */
- union {
- u8 c[0x100000 / 1];
- u16 s[0x100000 / 2];
- u32 l[0x100000 / 4];
- u64 d[0x100000 / 8];
- } cp_devio_raw_flush[6]; /* 0xA00000-0xBFFFFF */
-
- #define cp_devio_flush(n) cp_devio_raw_flush[((n)<2)?(n*2):(n+2)]
-
-};
-
-#endif /* _ASM_IA64_SN_PCI_TIOCP_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_TIOCX_H
-#define _ASM_IA64_SN_TIO_TIOCX_H
-
-#ifdef __KERNEL__
-
-struct cx_id_s {
- unsigned int part_num;
- unsigned int mfg_num;
- int nasid;
-};
-
-struct cx_dev {
- struct cx_id_s cx_id;
- int bt; /* board/blade type */
- void *soft; /* driver specific */
- struct hubdev_info *hubdev;
- struct device dev;
- struct cx_drv *driver;
-};
-
-struct cx_device_id {
- unsigned int part_num;
- unsigned int mfg_num;
-};
-
-struct cx_drv {
- char *name;
- const struct cx_device_id *id_table;
- struct device_driver driver;
- int (*probe) (struct cx_dev * dev, const struct cx_device_id * id);
- int (*remove) (struct cx_dev * dev);
-};
-
-/* create DMA address by stripping AS bits */
-#define TIOCX_DMA_ADDR(a) (u64)((u64)(a) & 0xffffcfffffffffUL)
-
-#define TIOCX_TO_TIOCX_DMA_ADDR(a) (u64)(((u64)(a) & 0xfffffffff) | \
- ((((u64)(a)) & 0xffffc000000000UL) <<2))
-
-#define TIO_CE_ASIC_PARTNUM 0xce00
-#define TIOCX_CORELET 3
-
-/* These are taken from tio_mmr_as.h */
-#define TIO_ICE_FRZ_CFG TIO_MMR_ADDR_MOD(0x00000000b0008100UL)
-#define TIO_ICE_PMI_TX_CFG TIO_MMR_ADDR_MOD(0x00000000b000b100UL)
-#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3 TIO_MMR_ADDR_MOD(0x00000000b000be18UL)
-#define TIO_ICE_PMI_TX_DYN_CREDIT_STAT_CB3_CREDIT_CNT_MASK 0x000000000000000fUL
-
-#define to_cx_dev(n) container_of(n, struct cx_dev, dev)
-#define to_cx_driver(drv) container_of(drv, struct cx_drv, driver)
-
-extern struct sn_irq_info *tiocx_irq_alloc(nasid_t, int, int, nasid_t, int);
-extern void tiocx_irq_free(struct sn_irq_info *);
-extern int cx_device_unregister(struct cx_dev *);
-extern int cx_device_register(nasid_t, int, int, struct hubdev_info *, int);
-extern int cx_driver_unregister(struct cx_drv *);
-extern int cx_driver_register(struct cx_drv *);
-extern u64 tiocx_dma_addr(u64 addr);
-extern u64 tiocx_swin_base(int nasid);
-extern void tiocx_mmr_store(int nasid, u64 offset, u64 value);
-extern u64 tiocx_mmr_load(int nasid, u64 offset);
-
-#endif // __KERNEL__
-#endif // _ASM_IA64_SN_TIO_TIOCX__
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999,2001-2003 Silicon Graphics, Inc. All Rights Reserved.
- * Copyright (C) 1999 by Ralf Baechle
- */
-#ifndef _ASM_IA64_SN_TYPES_H
-#define _ASM_IA64_SN_TYPES_H
-
-#include <linux/types.h>
-
-typedef unsigned long cpuid_t;
-typedef signed short nasid_t; /* node id in numa-as-id space */
-typedef signed char partid_t; /* partition ID type */
-typedef unsigned int moduleid_t; /* user-visible module number type */
-typedef unsigned int cmoduleid_t; /* kernel compact module id type */
-typedef unsigned char slotid_t; /* slot (blade) within module */
-typedef unsigned char slabid_t; /* slab (asic) within slot */
-typedef u64 nic_t;
-typedef unsigned long iopaddr_t;
-typedef unsigned long paddr_t;
-typedef short cnodeid_t;
-
-#endif /* _ASM_IA64_SN_TYPES_H */
} else if (!strcmp(hdr->oem_id, "SGI")) {
if (!strcmp(hdr->oem_table_id + 4, "UV"))
return "uv";
- else
- return "sn2";
}
#ifdef CONFIG_INTEL_IOMMU
int pxm;
pxm = pa->proximity_domain_lo;
- if (ia64_platform_is("sn2") || acpi_srat_revision >= 2)
+ if (acpi_srat_revision >= 2)
pxm += pa->proximity_domain_hi[0] << 8;
return pxm;
}
int pxm;
pxm = ma->proximity_domain;
- if (!ia64_platform_is("sn2") && acpi_srat_revision <= 1)
+ if (acpi_srat_revision <= 1)
pxm &= 0xff;
return pxm;
if (acpi_table_parse_madt
(ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1) {
- if (!ia64_platform_is("sn2"))
- printk(KERN_ERR PREFIX
- "Error parsing MADT - no IOSAPIC entries\n");
+ printk(KERN_ERR PREFIX
+ "Error parsing MADT - no IOSAPIC entries\n");
}
/* System-Level Interrupt Routing */
irq_redir[irq] = (char) (redir & 0xff);
}
}
-
-bool is_affinity_mask_valid(const struct cpumask *cpumask)
-{
- if (ia64_platform_is("sn2")) {
- /* Only allow one CPU to be specified in the smp_affinity mask */
- if (cpumask_weight(cpumask) != 1)
- return false;
- }
- return true;
-}
-
#endif /* CONFIG_SMP */
int __init arch_early_irq_init(void)
sal_revision = SAL_VERSION_CODE(2, 8);
sal_version = SAL_VERSION_CODE(0, 0);
}
-
- if (ia64_platform_is("sn2") && (sal_revision == SAL_VERSION_CODE(2, 9)))
- /*
- * SGI Altix has hard-coded version 2.9 in their prom
- * but they actually implement 3.2, so let's fix it here.
- */
- sal_revision = SAL_VERSION_CODE(3, 2);
}
static void __init
* in kdump case. See the comment in sba_init() in sba_iommu.c.
*
* So, the only machvec that really supports loading the kdump kernel
- * over 4 GB is "sn2".
+ * over 4 GB is "uv".
*/
static int __init check_crashkernel_memory(unsigned long pbase, size_t size)
{
- if (ia64_platform_is("sn2") || ia64_platform_is("uv"))
+ if (ia64_platform_is("uv"))
return 1;
else
return pbase < (1UL << 32);
#include <asm/sal.h>
#include <asm/tlbflush.h>
#include <asm/unistd.h>
-#include <asm/sn/arch.h>
#define SMP_DEBUG 0
return (-EBUSY);
}
- if (ia64_platform_is("sn2")) {
- if (!sn_cpu_disable_allowed(cpu))
- return -EBUSY;
- }
-
set_cpu_online(cpu, false);
if (migrate_platform_irqs(cpu)) {
#include <asm/pgtable.h>
#include <linux/atomic.h>
#include <asm/tlbflush.h>
-#include <asm/sn/arch.h>
extern void __init efi_memmap_walk_uc(efi_freemem_callback_t, void *);
preempt_disable();
- if (ia64_platform_is("sn2"))
- sn_flush_all_caches(uc_addr, IA64_GRANULE_SIZE);
- else
- flush_icache_range(uc_addr, uc_addr + IA64_GRANULE_SIZE);
+ flush_icache_range(uc_addr, uc_addr + IA64_GRANULE_SIZE);
/* flush the just introduced uncached translation from the TLB */
local_flush_tlb_all();
+++ /dev/null
-# arch/ia64/sn/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2004 Silicon Graphics, Inc. All Rights Reserved.
-#
-# Makefile for the sn ia64 subplatform
-#
-
-obj-y += kernel/ pci/
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2003 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_IOERROR_H
-#define _ASM_IA64_SN_IOERROR_H
-
-/*
- * IO error structure.
- *
- * This structure would expand to hold the information retrieved from
- * all IO related error registers.
- *
- * This structure is defined to hold all system specific
- * information related to a single error.
- *
- * This serves a couple of purpose.
- * - Error handling often involves translating one form of address to other
- * form. So, instead of having different data structures at each level,
- * we have a single structure, and the appropriate fields get filled in
- * at each layer.
- * - This provides a way to dump all error related information in any layer
- * of erorr handling (debugging aid).
- *
- * A second possibility is to allow each layer to define its own error
- * data structure, and fill in the proper fields. This has the advantage
- * of isolating the layers.
- * A big concern is the potential stack usage (and overflow), if each layer
- * defines these structures on stack (assuming we don't want to do kmalloc.
- *
- * Any layer wishing to pass extra information to a layer next to it in
- * error handling hierarchy, can do so as a separate parameter.
- */
-
-typedef struct io_error_s {
- /* Bit fields indicating which structure fields are valid */
- union {
- struct {
- unsigned ievb_errortype:1;
- unsigned ievb_widgetnum:1;
- unsigned ievb_widgetdev:1;
- unsigned ievb_srccpu:1;
- unsigned ievb_srcnode:1;
- unsigned ievb_errnode:1;
- unsigned ievb_sysioaddr:1;
- unsigned ievb_xtalkaddr:1;
- unsigned ievb_busspace:1;
- unsigned ievb_busaddr:1;
- unsigned ievb_vaddr:1;
- unsigned ievb_memaddr:1;
- unsigned ievb_epc:1;
- unsigned ievb_ef:1;
- unsigned ievb_tnum:1;
- } iev_b;
- unsigned iev_a;
- } ie_v;
-
- short ie_errortype; /* error type: extra info about error */
- short ie_widgetnum; /* Widget number that's in error */
- short ie_widgetdev; /* Device within widget in error */
- cpuid_t ie_srccpu; /* CPU on srcnode generating error */
- cnodeid_t ie_srcnode; /* Node which caused the error */
- cnodeid_t ie_errnode; /* Node where error was noticed */
- iopaddr_t ie_sysioaddr; /* Sys specific IO address */
- iopaddr_t ie_xtalkaddr; /* Xtalk (48bit) addr of Error */
- iopaddr_t ie_busspace; /* Bus specific address space */
- iopaddr_t ie_busaddr; /* Bus specific address */
- caddr_t ie_vaddr; /* Virtual address of error */
- iopaddr_t ie_memaddr; /* Physical memory address */
- caddr_t ie_epc; /* pc when error reported */
- caddr_t ie_ef; /* eframe when error reported */
- short ie_tnum; /* Xtalk TNUM field */
-} ioerror_t;
-
-#define IOERROR_INIT(e) do { (e)->ie_v.iev_a = 0; } while (0)
-#define IOERROR_SETVALUE(e,f,v) do { (e)->ie_ ## f = (v); (e)->ie_v.iev_b.ievb_ ## f = 1; } while (0)
-
-#endif /* _ASM_IA64_SN_IOERROR_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_IA64_SN_TIO_H
-#define _ASM_IA64_SN_TIO_H
-
-#define TIO_MMR_ADDR_MOD
-
-#define TIO_NODE_ID TIO_MMR_ADDR_MOD(0x0000000090060e80)
-
-#define TIO_ITTE_BASE 0xb0008800 /* base of translation table entries */
-#define TIO_ITTE(bigwin) (TIO_ITTE_BASE + 8*(bigwin))
-
-#define TIO_ITTE_OFFSET_BITS 8 /* size of offset field */
-#define TIO_ITTE_OFFSET_MASK ((1<<TIO_ITTE_OFFSET_BITS)-1)
-#define TIO_ITTE_OFFSET_SHIFT 0
-
-#define TIO_ITTE_WIDGET_BITS 2 /* size of widget field */
-#define TIO_ITTE_WIDGET_MASK ((1<<TIO_ITTE_WIDGET_BITS)-1)
-#define TIO_ITTE_WIDGET_SHIFT 12
-#define TIO_ITTE_VALID_MASK 0x1
-#define TIO_ITTE_VALID_SHIFT 16
-
-#define TIO_ITTE_WIDGET(itte) \
- (((itte) >> TIO_ITTE_WIDGET_SHIFT) & TIO_ITTE_WIDGET_MASK)
-#define TIO_ITTE_VALID(itte) \
- (((itte) >> TIO_ITTE_VALID_SHIFT) & TIO_ITTE_VALID_MASK)
-
-#define TIO_ITTE_PUT(nasid, bigwin, widget, addr, valid) \
- REMOTE_HUB_S((nasid), TIO_ITTE(bigwin), \
- (((((addr) >> TIO_BWIN_SIZE_BITS) & \
- TIO_ITTE_OFFSET_MASK) << TIO_ITTE_OFFSET_SHIFT) | \
- (((widget) & TIO_ITTE_WIDGET_MASK) << TIO_ITTE_WIDGET_SHIFT)) | \
- (( (valid) & TIO_ITTE_VALID_MASK) << TIO_ITTE_VALID_SHIFT))
-
-#endif /* _ASM_IA64_SN_TIO_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-#ifndef _ASM_IA64_SN_XTALK_HUBDEV_H
-#define _ASM_IA64_SN_XTALK_HUBDEV_H
-
-#include "xtalk/xwidgetdev.h"
-
-#define HUB_WIDGET_ID_MAX 0xf
-#define DEV_PER_WIDGET (2*2*8)
-#define IIO_ITTE_WIDGET_BITS 4 /* size of widget field */
-#define IIO_ITTE_WIDGET_MASK ((1<<IIO_ITTE_WIDGET_BITS)-1)
-#define IIO_ITTE_WIDGET_SHIFT 8
-
-#define IIO_ITTE_WIDGET(itte) \
- (((itte) >> IIO_ITTE_WIDGET_SHIFT) & IIO_ITTE_WIDGET_MASK)
-
-/*
- * Use the top big window as a surrogate for the first small window
- */
-#define SWIN0_BIGWIN HUB_NUM_BIG_WINDOW
-#define IIO_NUM_ITTES 7
-#define HUB_NUM_BIG_WINDOW (IIO_NUM_ITTES - 1)
-
-/* This struct is shared between the PROM and the kernel.
- * Changes to this struct will require corresponding changes to the kernel.
- */
-struct sn_flush_device_common {
- int sfdl_bus;
- int sfdl_slot;
- int sfdl_pin;
- struct common_bar_list {
- unsigned long start;
- unsigned long end;
- } sfdl_bar_list[6];
- unsigned long sfdl_force_int_addr;
- unsigned long sfdl_flush_value;
- volatile unsigned long *sfdl_flush_addr;
- u32 sfdl_persistent_busnum;
- u32 sfdl_persistent_segment;
- struct pcibus_info *sfdl_pcibus_info;
-};
-
-/* This struct is kernel only and is not used by the PROM */
-struct sn_flush_device_kernel {
- spinlock_t sfdl_flush_lock;
- struct sn_flush_device_common *common;
-};
-
-/* 01/16/06 This struct is the old PROM/kernel struct and needs to be included
- * for older official PROMs to function on the new kernel base. This struct
- * will be removed when the next official PROM release occurs. */
-
-struct sn_flush_device_war {
- struct sn_flush_device_common common;
- u32 filler; /* older PROMs expect the default size of a spinlock_t */
-};
-
-/*
- * **widget_p - Used as an array[wid_num][device] of sn_flush_device_kernel.
- */
-struct sn_flush_nasid_entry {
- struct sn_flush_device_kernel **widget_p; // Used as an array of wid_num
- u64 iio_itte[8];
-};
-
-struct hubdev_info {
- geoid_t hdi_geoid;
- short hdi_nasid;
- short hdi_peer_nasid; /* Dual Porting Peer */
-
- struct sn_flush_nasid_entry hdi_flush_nasid_list;
- struct xwidget_info hdi_xwidget_info[HUB_WIDGET_ID_MAX + 1];
-
-
- void *hdi_nodepda;
- void *hdi_node_vertex;
- u32 max_segment_number;
- u32 max_pcibus_number;
-};
-
-extern void hubdev_init_node(nodepda_t *, cnodeid_t);
-extern void hub_error_init(struct hubdev_info *);
-extern void ice_error_init(struct hubdev_info *);
-
-
-#endif /* _ASM_IA64_SN_XTALK_HUBDEV_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2006 Silicon Graphics, Inc. All Rights
- * Reserved.
- */
-#ifndef _ASM_IA64_SN_XTALK_XBOW_H
-#define _ASM_IA64_SN_XTALK_XBOW_H
-
-#define XBOW_PORT_8 0x8
-#define XBOW_PORT_C 0xc
-#define XBOW_PORT_F 0xf
-
-#define MAX_XBOW_PORTS 8 /* number of ports on xbow chip */
-#define BASE_XBOW_PORT XBOW_PORT_8 /* Lowest external port */
-
-#define XBOW_CREDIT 4
-
-#define MAX_XBOW_NAME 16
-
-/* Register set for each xbow link */
-typedef volatile struct xb_linkregs_s {
-/*
- * we access these through synergy unswizzled space, so the address
- * gets twiddled (i.e. references to 0x4 actually go to 0x0 and vv.)
- * That's why we put the register first and filler second.
- */
- u32 link_ibf;
- u32 filler0; /* filler for proper alignment */
- u32 link_control;
- u32 filler1;
- u32 link_status;
- u32 filler2;
- u32 link_arb_upper;
- u32 filler3;
- u32 link_arb_lower;
- u32 filler4;
- u32 link_status_clr;
- u32 filler5;
- u32 link_reset;
- u32 filler6;
- u32 link_aux_status;
- u32 filler7;
-} xb_linkregs_t;
-
-typedef volatile struct xbow_s {
- /* standard widget configuration 0x000000-0x000057 */
- struct widget_cfg xb_widget; /* 0x000000 */
-
- /* helper fieldnames for accessing bridge widget */
-
-#define xb_wid_id xb_widget.w_id
-#define xb_wid_stat xb_widget.w_status
-#define xb_wid_err_upper xb_widget.w_err_upper_addr
-#define xb_wid_err_lower xb_widget.w_err_lower_addr
-#define xb_wid_control xb_widget.w_control
-#define xb_wid_req_timeout xb_widget.w_req_timeout
-#define xb_wid_int_upper xb_widget.w_intdest_upper_addr
-#define xb_wid_int_lower xb_widget.w_intdest_lower_addr
-#define xb_wid_err_cmdword xb_widget.w_err_cmd_word
-#define xb_wid_llp xb_widget.w_llp_cfg
-#define xb_wid_stat_clr xb_widget.w_tflush
-
-/*
- * we access these through synergy unswizzled space, so the address
- * gets twiddled (i.e. references to 0x4 actually go to 0x0 and vv.)
- * That's why we put the register first and filler second.
- */
- /* xbow-specific widget configuration 0x000058-0x0000FF */
- u32 xb_wid_arb_reload; /* 0x00005C */
- u32 _pad_000058;
- u32 xb_perf_ctr_a; /* 0x000064 */
- u32 _pad_000060;
- u32 xb_perf_ctr_b; /* 0x00006c */
- u32 _pad_000068;
- u32 xb_nic; /* 0x000074 */
- u32 _pad_000070;
-
- /* Xbridge only */
- u32 xb_w0_rst_fnc; /* 0x00007C */
- u32 _pad_000078;
- u32 xb_l8_rst_fnc; /* 0x000084 */
- u32 _pad_000080;
- u32 xb_l9_rst_fnc; /* 0x00008c */
- u32 _pad_000088;
- u32 xb_la_rst_fnc; /* 0x000094 */
- u32 _pad_000090;
- u32 xb_lb_rst_fnc; /* 0x00009c */
- u32 _pad_000098;
- u32 xb_lc_rst_fnc; /* 0x0000a4 */
- u32 _pad_0000a0;
- u32 xb_ld_rst_fnc; /* 0x0000ac */
- u32 _pad_0000a8;
- u32 xb_le_rst_fnc; /* 0x0000b4 */
- u32 _pad_0000b0;
- u32 xb_lf_rst_fnc; /* 0x0000bc */
- u32 _pad_0000b8;
- u32 xb_lock; /* 0x0000c4 */
- u32 _pad_0000c0;
- u32 xb_lock_clr; /* 0x0000cc */
- u32 _pad_0000c8;
- /* end of Xbridge only */
- u32 _pad_0000d0[12];
-
- /* Link Specific Registers, port 8..15 0x000100-0x000300 */
- xb_linkregs_t xb_link_raw[MAX_XBOW_PORTS];
-} xbow_t;
-
-#define xb_link(p) xb_link_raw[(p) & (MAX_XBOW_PORTS - 1)]
-
-#define XB_FLAGS_EXISTS 0x1 /* device exists */
-#define XB_FLAGS_MASTER 0x2
-#define XB_FLAGS_SLAVE 0x0
-#define XB_FLAGS_GBR 0x4
-#define XB_FLAGS_16BIT 0x8
-#define XB_FLAGS_8BIT 0x0
-
-/* is widget port number valid? (based on version 7.0 of xbow spec) */
-#define XBOW_WIDGET_IS_VALID(wid) ((wid) >= XBOW_PORT_8 && (wid) <= XBOW_PORT_F)
-
-/* whether to use upper or lower arbitration register, given source widget id */
-#define XBOW_ARB_IS_UPPER(wid) ((wid) >= XBOW_PORT_8 && (wid) <= XBOW_PORT_B)
-#define XBOW_ARB_IS_LOWER(wid) ((wid) >= XBOW_PORT_C && (wid) <= XBOW_PORT_F)
-
-/* offset of arbitration register, given source widget id */
-#define XBOW_ARB_OFF(wid) (XBOW_ARB_IS_UPPER(wid) ? 0x1c : 0x24)
-
-#define XBOW_WID_ID WIDGET_ID
-#define XBOW_WID_STAT WIDGET_STATUS
-#define XBOW_WID_ERR_UPPER WIDGET_ERR_UPPER_ADDR
-#define XBOW_WID_ERR_LOWER WIDGET_ERR_LOWER_ADDR
-#define XBOW_WID_CONTROL WIDGET_CONTROL
-#define XBOW_WID_REQ_TO WIDGET_REQ_TIMEOUT
-#define XBOW_WID_INT_UPPER WIDGET_INTDEST_UPPER_ADDR
-#define XBOW_WID_INT_LOWER WIDGET_INTDEST_LOWER_ADDR
-#define XBOW_WID_ERR_CMDWORD WIDGET_ERR_CMD_WORD
-#define XBOW_WID_LLP WIDGET_LLP_CFG
-#define XBOW_WID_STAT_CLR WIDGET_TFLUSH
-#define XBOW_WID_ARB_RELOAD 0x5c
-#define XBOW_WID_PERF_CTR_A 0x64
-#define XBOW_WID_PERF_CTR_B 0x6c
-#define XBOW_WID_NIC 0x74
-
-/* Xbridge only */
-#define XBOW_W0_RST_FNC 0x00007C
-#define XBOW_L8_RST_FNC 0x000084
-#define XBOW_L9_RST_FNC 0x00008c
-#define XBOW_LA_RST_FNC 0x000094
-#define XBOW_LB_RST_FNC 0x00009c
-#define XBOW_LC_RST_FNC 0x0000a4
-#define XBOW_LD_RST_FNC 0x0000ac
-#define XBOW_LE_RST_FNC 0x0000b4
-#define XBOW_LF_RST_FNC 0x0000bc
-#define XBOW_RESET_FENCE(x) ((x) > 7 && (x) < 16) ? \
- (XBOW_W0_RST_FNC + ((x) - 7) * 8) : \
- ((x) == 0) ? XBOW_W0_RST_FNC : 0
-#define XBOW_LOCK 0x0000c4
-#define XBOW_LOCK_CLR 0x0000cc
-/* End of Xbridge only */
-
-/* used only in ide, but defined here within the reserved portion */
-/* of the widget0 address space (before 0xf4) */
-#define XBOW_WID_UNDEF 0xe4
-
-/* xbow link register set base, legal value for x is 0x8..0xf */
-#define XB_LINK_BASE 0x100
-#define XB_LINK_OFFSET 0x40
-#define XB_LINK_REG_BASE(x) (XB_LINK_BASE + ((x) & (MAX_XBOW_PORTS - 1)) * XB_LINK_OFFSET)
-
-#define XB_LINK_IBUF_FLUSH(x) (XB_LINK_REG_BASE(x) + 0x4)
-#define XB_LINK_CTRL(x) (XB_LINK_REG_BASE(x) + 0xc)
-#define XB_LINK_STATUS(x) (XB_LINK_REG_BASE(x) + 0x14)
-#define XB_LINK_ARB_UPPER(x) (XB_LINK_REG_BASE(x) + 0x1c)
-#define XB_LINK_ARB_LOWER(x) (XB_LINK_REG_BASE(x) + 0x24)
-#define XB_LINK_STATUS_CLR(x) (XB_LINK_REG_BASE(x) + 0x2c)
-#define XB_LINK_RESET(x) (XB_LINK_REG_BASE(x) + 0x34)
-#define XB_LINK_AUX_STATUS(x) (XB_LINK_REG_BASE(x) + 0x3c)
-
-/* link_control(x) */
-#define XB_CTRL_LINKALIVE_IE 0x80000000 /* link comes alive */
-/* reserved: 0x40000000 */
-#define XB_CTRL_PERF_CTR_MODE_MSK 0x30000000 /* perf counter mode */
-#define XB_CTRL_IBUF_LEVEL_MSK 0x0e000000 /* input packet buffer
- level */
-#define XB_CTRL_8BIT_MODE 0x01000000 /* force link into 8
- bit mode */
-#define XB_CTRL_BAD_LLP_PKT 0x00800000 /* force bad LLP
- packet */
-#define XB_CTRL_WIDGET_CR_MSK 0x007c0000 /* LLP widget credit
- mask */
-#define XB_CTRL_WIDGET_CR_SHFT 18 /* LLP widget credit
- shift */
-#define XB_CTRL_ILLEGAL_DST_IE 0x00020000 /* illegal destination
- */
-#define XB_CTRL_OALLOC_IBUF_IE 0x00010000 /* overallocated input
- buffer */
-/* reserved: 0x0000fe00 */
-#define XB_CTRL_BNDWDTH_ALLOC_IE 0x00000100 /* bandwidth alloc */
-#define XB_CTRL_RCV_CNT_OFLOW_IE 0x00000080 /* rcv retry overflow */
-#define XB_CTRL_XMT_CNT_OFLOW_IE 0x00000040 /* xmt retry overflow */
-#define XB_CTRL_XMT_MAX_RTRY_IE 0x00000020 /* max transmit retry */
-#define XB_CTRL_RCV_IE 0x00000010 /* receive */
-#define XB_CTRL_XMT_RTRY_IE 0x00000008 /* transmit retry */
-/* reserved: 0x00000004 */
-#define XB_CTRL_MAXREQ_TOUT_IE 0x00000002 /* maximum request
- timeout */
-#define XB_CTRL_SRC_TOUT_IE 0x00000001 /* source timeout */
-
-/* link_status(x) */
-#define XB_STAT_LINKALIVE XB_CTRL_LINKALIVE_IE
-/* reserved: 0x7ff80000 */
-#define XB_STAT_MULTI_ERR 0x00040000 /* multi error */
-#define XB_STAT_ILLEGAL_DST_ERR XB_CTRL_ILLEGAL_DST_IE
-#define XB_STAT_OALLOC_IBUF_ERR XB_CTRL_OALLOC_IBUF_IE
-#define XB_STAT_BNDWDTH_ALLOC_ID_MSK 0x0000ff00 /* port bitmask */
-#define XB_STAT_RCV_CNT_OFLOW_ERR XB_CTRL_RCV_CNT_OFLOW_IE
-#define XB_STAT_XMT_CNT_OFLOW_ERR XB_CTRL_XMT_CNT_OFLOW_IE
-#define XB_STAT_XMT_MAX_RTRY_ERR XB_CTRL_XMT_MAX_RTRY_IE
-#define XB_STAT_RCV_ERR XB_CTRL_RCV_IE
-#define XB_STAT_XMT_RTRY_ERR XB_CTRL_XMT_RTRY_IE
-/* reserved: 0x00000004 */
-#define XB_STAT_MAXREQ_TOUT_ERR XB_CTRL_MAXREQ_TOUT_IE
-#define XB_STAT_SRC_TOUT_ERR XB_CTRL_SRC_TOUT_IE
-
-/* link_aux_status(x) */
-#define XB_AUX_STAT_RCV_CNT 0xff000000
-#define XB_AUX_STAT_XMT_CNT 0x00ff0000
-#define XB_AUX_STAT_TOUT_DST 0x0000ff00
-#define XB_AUX_LINKFAIL_RST_BAD 0x00000040
-#define XB_AUX_STAT_PRESENT 0x00000020
-#define XB_AUX_STAT_PORT_WIDTH 0x00000010
-/* reserved: 0x0000000f */
-
-/*
- * link_arb_upper/link_arb_lower(x), (reg) should be the link_arb_upper
- * register if (x) is 0x8..0xb, link_arb_lower if (x) is 0xc..0xf
- */
-#define XB_ARB_GBR_MSK 0x1f
-#define XB_ARB_RR_MSK 0x7
-#define XB_ARB_GBR_SHFT(x) (((x) & 0x3) * 8)
-#define XB_ARB_RR_SHFT(x) (((x) & 0x3) * 8 + 5)
-#define XB_ARB_GBR_CNT(reg,x) ((reg) >> XB_ARB_GBR_SHFT(x) & XB_ARB_GBR_MSK)
-#define XB_ARB_RR_CNT(reg,x) ((reg) >> XB_ARB_RR_SHFT(x) & XB_ARB_RR_MSK)
-
-/* XBOW_WID_STAT */
-#define XB_WID_STAT_LINK_INTR_SHFT (24)
-#define XB_WID_STAT_LINK_INTR_MASK (0xFF << XB_WID_STAT_LINK_INTR_SHFT)
-#define XB_WID_STAT_LINK_INTR(x) \
- (0x1 << (((x)&7) + XB_WID_STAT_LINK_INTR_SHFT))
-#define XB_WID_STAT_WIDGET0_INTR 0x00800000
-#define XB_WID_STAT_SRCID_MASK 0x000003c0 /* Xbridge only */
-#define XB_WID_STAT_REG_ACC_ERR 0x00000020
-#define XB_WID_STAT_RECV_TOUT 0x00000010 /* Xbridge only */
-#define XB_WID_STAT_ARB_TOUT 0x00000008 /* Xbridge only */
-#define XB_WID_STAT_XTALK_ERR 0x00000004
-#define XB_WID_STAT_DST_TOUT 0x00000002 /* Xbridge only */
-#define XB_WID_STAT_MULTI_ERR 0x00000001
-
-#define XB_WID_STAT_SRCID_SHFT 6
-
-/* XBOW_WID_CONTROL */
-#define XB_WID_CTRL_REG_ACC_IE XB_WID_STAT_REG_ACC_ERR
-#define XB_WID_CTRL_RECV_TOUT XB_WID_STAT_RECV_TOUT
-#define XB_WID_CTRL_ARB_TOUT XB_WID_STAT_ARB_TOUT
-#define XB_WID_CTRL_XTALK_IE XB_WID_STAT_XTALK_ERR
-
-/* XBOW_WID_INT_UPPER */
-/* defined in xwidget.h for WIDGET_INTDEST_UPPER_ADDR */
-
-/* XBOW WIDGET part number, in the ID register */
-#define XBOW_WIDGET_PART_NUM 0x0 /* crossbow */
-#define XXBOW_WIDGET_PART_NUM 0xd000 /* Xbridge */
-#define XBOW_WIDGET_MFGR_NUM 0x0
-#define XXBOW_WIDGET_MFGR_NUM 0x0
-#define PXBOW_WIDGET_PART_NUM 0xd100 /* PIC */
-
-#define XBOW_REV_1_0 0x1 /* xbow rev 1.0 is "1" */
-#define XBOW_REV_1_1 0x2 /* xbow rev 1.1 is "2" */
-#define XBOW_REV_1_2 0x3 /* xbow rev 1.2 is "3" */
-#define XBOW_REV_1_3 0x4 /* xbow rev 1.3 is "4" */
-#define XBOW_REV_2_0 0x5 /* xbow rev 2.0 is "5" */
-
-#define XXBOW_PART_REV_1_0 (XXBOW_WIDGET_PART_NUM << 4 | 0x1 )
-#define XXBOW_PART_REV_2_0 (XXBOW_WIDGET_PART_NUM << 4 | 0x2 )
-
-/* XBOW_WID_ARB_RELOAD */
-#define XBOW_WID_ARB_RELOAD_INT 0x3f /* GBR reload interval */
-
-#define IS_XBRIDGE_XBOW(wid) \
- (XWIDGET_PART_NUM(wid) == XXBOW_WIDGET_PART_NUM && \
- XWIDGET_MFG_NUM(wid) == XXBOW_WIDGET_MFGR_NUM)
-
-#define IS_PIC_XBOW(wid) \
- (XWIDGET_PART_NUM(wid) == PXBOW_WIDGET_PART_NUM && \
- XWIDGET_MFG_NUM(wid) == XXBOW_WIDGET_MFGR_NUM)
-
-#define XBOW_WAR_ENABLED(pv, widid) ((1 << XWIDGET_REV_NUM(widid)) & pv)
-
-#endif /* _ASM_IA64_SN_XTALK_XBOW_H */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992-1997,2000-2003 Silicon Graphics, Inc. All Rights Reserved.
- */
-#ifndef _ASM_IA64_SN_XTALK_XWIDGET_H
-#define _ASM_IA64_SN_XTALK_XWIDGET_H
-
-/* WIDGET_ID */
-#define WIDGET_REV_NUM 0xf0000000
-#define WIDGET_PART_NUM 0x0ffff000
-#define WIDGET_MFG_NUM 0x00000ffe
-#define WIDGET_REV_NUM_SHFT 28
-#define WIDGET_PART_NUM_SHFT 12
-#define WIDGET_MFG_NUM_SHFT 1
-
-#define XWIDGET_PART_NUM(widgetid) (((widgetid) & WIDGET_PART_NUM) >> WIDGET_PART_NUM_SHFT)
-#define XWIDGET_REV_NUM(widgetid) (((widgetid) & WIDGET_REV_NUM) >> WIDGET_REV_NUM_SHFT)
-#define XWIDGET_MFG_NUM(widgetid) (((widgetid) & WIDGET_MFG_NUM) >> WIDGET_MFG_NUM_SHFT)
-#define XWIDGET_PART_REV_NUM(widgetid) ((XWIDGET_PART_NUM(widgetid) << 4) | \
- XWIDGET_REV_NUM(widgetid))
-#define XWIDGET_PART_REV_NUM_REV(partrev) (partrev & 0xf)
-
-/* widget configuration registers */
-struct widget_cfg{
- u32 w_id; /* 0x04 */
- u32 w_pad_0; /* 0x00 */
- u32 w_status; /* 0x0c */
- u32 w_pad_1; /* 0x08 */
- u32 w_err_upper_addr; /* 0x14 */
- u32 w_pad_2; /* 0x10 */
- u32 w_err_lower_addr; /* 0x1c */
- u32 w_pad_3; /* 0x18 */
- u32 w_control; /* 0x24 */
- u32 w_pad_4; /* 0x20 */
- u32 w_req_timeout; /* 0x2c */
- u32 w_pad_5; /* 0x28 */
- u32 w_intdest_upper_addr; /* 0x34 */
- u32 w_pad_6; /* 0x30 */
- u32 w_intdest_lower_addr; /* 0x3c */
- u32 w_pad_7; /* 0x38 */
- u32 w_err_cmd_word; /* 0x44 */
- u32 w_pad_8; /* 0x40 */
- u32 w_llp_cfg; /* 0x4c */
- u32 w_pad_9; /* 0x48 */
- u32 w_tflush; /* 0x54 */
- u32 w_pad_10; /* 0x50 */
-};
-
-/*
- * Crosstalk Widget Hardware Identification, as defined in the Crosstalk spec.
- */
-struct xwidget_hwid{
- int mfg_num;
- int rev_num;
- int part_num;
-};
-
-struct xwidget_info{
-
- struct xwidget_hwid xwi_hwid; /* Widget Identification */
- char xwi_masterxid; /* Hub's Widget Port Number */
- void *xwi_hubinfo; /* Hub's provider private info */
- u64 *xwi_hub_provider; /* prom provider functions */
- void *xwi_vertex;
-};
-
-#endif /* _ASM_IA64_SN_XTALK_XWIDGET_H */
+++ /dev/null
-# arch/ia64/sn/kernel/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1999,2001-2006,2008 Silicon Graphics, Inc. All Rights Reserved.
-#
-
-ccflags-y := -I $(srctree)/arch/ia64/sn/include
-
-obj-y += setup.o bte.o bte_error.o irq.o mca.o idle.o \
- huberror.o io_acpi_init.o io_common.o \
- io_init.o iomv.o klconflib.o pio_phys.o \
- sn2/
-obj-$(CONFIG_IA64_GENERIC) += machvec.o
-obj-$(CONFIG_PCI_MSI) += msi_sn.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/module.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/shubio.h>
-#include <asm/nodedata.h>
-#include <asm/delay.h>
-
-#include <linux/memblock.h>
-#include <linux/string.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-
-#include <asm/sn/bte.h>
-
-#ifndef L1_CACHE_MASK
-#define L1_CACHE_MASK (L1_CACHE_BYTES - 1)
-#endif
-
-/* two interfaces on two btes */
-#define MAX_INTERFACES_TO_TRY 4
-#define MAX_NODES_TO_TRY 2
-
-static struct bteinfo_s *bte_if_on_node(nasid_t nasid, int interface)
-{
- nodepda_t *tmp_nodepda;
-
- if (nasid_to_cnodeid(nasid) == -1)
- return (struct bteinfo_s *)NULL;
-
- tmp_nodepda = NODEPDA(nasid_to_cnodeid(nasid));
- return &tmp_nodepda->bte_if[interface];
-
-}
-
-static inline void bte_start_transfer(struct bteinfo_s *bte, u64 len, u64 mode)
-{
- if (is_shub2()) {
- BTE_CTRL_STORE(bte, (IBLS_BUSY | ((len) | (mode) << 24)));
- } else {
- BTE_LNSTAT_STORE(bte, len);
- BTE_CTRL_STORE(bte, mode);
- }
-}
-
-/************************************************************************
- * Block Transfer Engine copy related functions.
- *
- ***********************************************************************/
-
-/*
- * bte_copy(src, dest, len, mode, notification)
- *
- * Use the block transfer engine to move kernel memory from src to dest
- * using the assigned mode.
- *
- * Parameters:
- * src - physical address of the transfer source.
- * dest - physical address of the transfer destination.
- * len - number of bytes to transfer from source to dest.
- * mode - hardware defined. See reference information
- * for IBCT0/1 in the SHUB Programmers Reference
- * notification - kernel virtual address of the notification cache
- * line. If NULL, the default is used and
- * the bte_copy is synchronous.
- *
- * NOTE: This function requires src, dest, and len to
- * be cacheline aligned.
- */
-bte_result_t bte_copy(u64 src, u64 dest, u64 len, u64 mode, void *notification)
-{
- u64 transfer_size;
- u64 transfer_stat;
- u64 notif_phys_addr;
- struct bteinfo_s *bte;
- bte_result_t bte_status;
- unsigned long irq_flags;
- unsigned long itc_end = 0;
- int nasid_to_try[MAX_NODES_TO_TRY];
- int my_nasid = cpuid_to_nasid(raw_smp_processor_id());
- int bte_if_index, nasid_index;
- int bte_first, btes_per_node = BTES_PER_NODE;
-
- BTE_PRINTK(("bte_copy(0x%lx, 0x%lx, 0x%lx, 0x%lx, 0x%p)\n",
- src, dest, len, mode, notification));
-
- if (len == 0) {
- return BTE_SUCCESS;
- }
-
- BUG_ON(len & L1_CACHE_MASK);
- BUG_ON(src & L1_CACHE_MASK);
- BUG_ON(dest & L1_CACHE_MASK);
- BUG_ON(len > BTE_MAX_XFER);
-
- /*
- * Start with interface corresponding to cpu number
- */
- bte_first = raw_smp_processor_id() % btes_per_node;
-
- if (mode & BTE_USE_DEST) {
- /* try remote then local */
- nasid_to_try[0] = NASID_GET(dest);
- if (mode & BTE_USE_ANY) {
- nasid_to_try[1] = my_nasid;
- } else {
- nasid_to_try[1] = 0;
- }
- } else {
- /* try local then remote */
- nasid_to_try[0] = my_nasid;
- if (mode & BTE_USE_ANY) {
- nasid_to_try[1] = NASID_GET(dest);
- } else {
- nasid_to_try[1] = 0;
- }
- }
-
-retry_bteop:
- do {
- local_irq_save(irq_flags);
-
- bte_if_index = bte_first;
- nasid_index = 0;
-
- /* Attempt to lock one of the BTE interfaces. */
- while (nasid_index < MAX_NODES_TO_TRY) {
- bte = bte_if_on_node(nasid_to_try[nasid_index],bte_if_index);
-
- if (bte == NULL) {
- nasid_index++;
- continue;
- }
-
- if (spin_trylock(&bte->spinlock)) {
- if (!(*bte->most_rcnt_na & BTE_WORD_AVAILABLE) ||
- (BTE_LNSTAT_LOAD(bte) & BTE_ACTIVE)) {
- /* Got the lock but BTE still busy */
- spin_unlock(&bte->spinlock);
- } else {
- /* we got the lock and it's not busy */
- break;
- }
- }
-
- bte_if_index = (bte_if_index + 1) % btes_per_node; /* Next interface */
- if (bte_if_index == bte_first) {
- /*
- * We've tried all interfaces on this node
- */
- nasid_index++;
- }
-
- bte = NULL;
- }
-
- if (bte != NULL) {
- break;
- }
-
- local_irq_restore(irq_flags);
-
- if (!(mode & BTE_WACQUIRE)) {
- return BTEFAIL_NOTAVAIL;
- }
- } while (1);
-
- if (notification == NULL) {
- /* User does not want to be notified. */
- bte->most_rcnt_na = &bte->notify;
- } else {
- bte->most_rcnt_na = notification;
- }
-
- /* Calculate the number of cache lines to transfer. */
- transfer_size = ((len >> L1_CACHE_SHIFT) & BTE_LEN_MASK);
-
- /* Initialize the notification to a known value. */
- *bte->most_rcnt_na = BTE_WORD_BUSY;
- notif_phys_addr = (u64)bte->most_rcnt_na;
-
- /* Set the source and destination registers */
- BTE_PRINTKV(("IBSA = 0x%lx)\n", src));
- BTE_SRC_STORE(bte, src);
- BTE_PRINTKV(("IBDA = 0x%lx)\n", dest));
- BTE_DEST_STORE(bte, dest);
-
- /* Set the notification register */
- BTE_PRINTKV(("IBNA = 0x%lx)\n", notif_phys_addr));
- BTE_NOTIF_STORE(bte, notif_phys_addr);
-
- /* Initiate the transfer */
- BTE_PRINTK(("IBCT = 0x%lx)\n", BTE_VALID_MODE(mode)));
- bte_start_transfer(bte, transfer_size, BTE_VALID_MODE(mode));
-
- itc_end = ia64_get_itc() + (40000000 * local_cpu_data->cyc_per_usec);
-
- spin_unlock_irqrestore(&bte->spinlock, irq_flags);
-
- if (notification != NULL) {
- return BTE_SUCCESS;
- }
-
- while ((transfer_stat = *bte->most_rcnt_na) == BTE_WORD_BUSY) {
- cpu_relax();
- if (ia64_get_itc() > itc_end) {
- BTE_PRINTK(("BTE timeout nasid 0x%x bte%d IBLS = 0x%lx na 0x%lx\n",
- NASID_GET(bte->bte_base_addr), bte->bte_num,
- BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na) );
- bte->bte_error_count++;
- bte->bh_error = IBLS_ERROR;
- bte_error_handler(NODEPDA(bte->bte_cnode));
- *bte->most_rcnt_na = BTE_WORD_AVAILABLE;
- goto retry_bteop;
- }
- }
-
- BTE_PRINTKV((" Delay Done. IBLS = 0x%lx, most_rcnt_na = 0x%lx\n",
- BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na));
-
- if (transfer_stat & IBLS_ERROR) {
- bte_status = BTE_GET_ERROR_STATUS(transfer_stat);
- } else {
- bte_status = BTE_SUCCESS;
- }
- *bte->most_rcnt_na = BTE_WORD_AVAILABLE;
-
- BTE_PRINTK(("Returning status is 0x%lx and most_rcnt_na is 0x%lx\n",
- BTE_LNSTAT_LOAD(bte), *bte->most_rcnt_na));
-
- return bte_status;
-}
-
-EXPORT_SYMBOL(bte_copy);
-
-/*
- * bte_unaligned_copy(src, dest, len, mode)
- *
- * use the block transfer engine to move kernel
- * memory from src to dest using the assigned mode.
- *
- * Parameters:
- * src - physical address of the transfer source.
- * dest - physical address of the transfer destination.
- * len - number of bytes to transfer from source to dest.
- * mode - hardware defined. See reference information
- * for IBCT0/1 in the SGI documentation.
- *
- * NOTE: If the source, dest, and len are all cache line aligned,
- * then it would be _FAR_ preferable to use bte_copy instead.
- */
-bte_result_t bte_unaligned_copy(u64 src, u64 dest, u64 len, u64 mode)
-{
- int destFirstCacheOffset;
- u64 headBteSource;
- u64 headBteLen;
- u64 headBcopySrcOffset;
- u64 headBcopyDest;
- u64 headBcopyLen;
- u64 footBteSource;
- u64 footBteLen;
- u64 footBcopyDest;
- u64 footBcopyLen;
- bte_result_t rv;
- char *bteBlock, *bteBlock_unaligned;
-
- if (len == 0) {
- return BTE_SUCCESS;
- }
-
- /* temporary buffer used during unaligned transfers */
- bteBlock_unaligned = kmalloc(len + 3 * L1_CACHE_BYTES, GFP_KERNEL);
- if (bteBlock_unaligned == NULL) {
- return BTEFAIL_NOTAVAIL;
- }
- bteBlock = (char *)L1_CACHE_ALIGN((u64) bteBlock_unaligned);
-
- headBcopySrcOffset = src & L1_CACHE_MASK;
- destFirstCacheOffset = dest & L1_CACHE_MASK;
-
- /*
- * At this point, the transfer is broken into
- * (up to) three sections. The first section is
- * from the start address to the first physical
- * cache line, the second is from the first physical
- * cache line to the last complete cache line,
- * and the third is from the last cache line to the
- * end of the buffer. The first and third sections
- * are handled by bte copying into a temporary buffer
- * and then bcopy'ing the necessary section into the
- * final location. The middle section is handled with
- * a standard bte copy.
- *
- * One nasty exception to the above rule is when the
- * source and destination are not symmetrically
- * mis-aligned. If the source offset from the first
- * cache line is different from the destination offset,
- * we make the first section be the entire transfer
- * and the bcopy the entire block into place.
- */
- if (headBcopySrcOffset == destFirstCacheOffset) {
-
- /*
- * Both the source and destination are the same
- * distance from a cache line boundary so we can
- * use the bte to transfer the bulk of the
- * data.
- */
- headBteSource = src & ~L1_CACHE_MASK;
- headBcopyDest = dest;
- if (headBcopySrcOffset) {
- headBcopyLen =
- (len >
- (L1_CACHE_BYTES -
- headBcopySrcOffset) ? L1_CACHE_BYTES
- - headBcopySrcOffset : len);
- headBteLen = L1_CACHE_BYTES;
- } else {
- headBcopyLen = 0;
- headBteLen = 0;
- }
-
- if (len > headBcopyLen) {
- footBcopyLen = (len - headBcopyLen) & L1_CACHE_MASK;
- footBteLen = L1_CACHE_BYTES;
-
- footBteSource = src + len - footBcopyLen;
- footBcopyDest = dest + len - footBcopyLen;
-
- if (footBcopyDest == (headBcopyDest + headBcopyLen)) {
- /*
- * We have two contiguous bcopy
- * blocks. Merge them.
- */
- headBcopyLen += footBcopyLen;
- headBteLen += footBteLen;
- } else if (footBcopyLen > 0) {
- rv = bte_copy(footBteSource,
- ia64_tpa((unsigned long)bteBlock),
- footBteLen, mode, NULL);
- if (rv != BTE_SUCCESS) {
- kfree(bteBlock_unaligned);
- return rv;
- }
-
- memcpy(__va(footBcopyDest),
- (char *)bteBlock, footBcopyLen);
- }
- } else {
- footBcopyLen = 0;
- footBteLen = 0;
- }
-
- if (len > (headBcopyLen + footBcopyLen)) {
- /* now transfer the middle. */
- rv = bte_copy((src + headBcopyLen),
- (dest +
- headBcopyLen),
- (len - headBcopyLen -
- footBcopyLen), mode, NULL);
- if (rv != BTE_SUCCESS) {
- kfree(bteBlock_unaligned);
- return rv;
- }
-
- }
- } else {
-
- /*
- * The transfer is not symmetric, we will
- * allocate a buffer large enough for all the
- * data, bte_copy into that buffer and then
- * bcopy to the destination.
- */
-
- headBcopySrcOffset = src & L1_CACHE_MASK;
- headBcopyDest = dest;
- headBcopyLen = len;
-
- headBteSource = src - headBcopySrcOffset;
- /* Add the leading and trailing bytes from source */
- headBteLen = L1_CACHE_ALIGN(len + headBcopySrcOffset);
- }
-
- if (headBcopyLen > 0) {
- rv = bte_copy(headBteSource,
- ia64_tpa((unsigned long)bteBlock), headBteLen,
- mode, NULL);
- if (rv != BTE_SUCCESS) {
- kfree(bteBlock_unaligned);
- return rv;
- }
-
- memcpy(__va(headBcopyDest), ((char *)bteBlock +
- headBcopySrcOffset), headBcopyLen);
- }
- kfree(bteBlock_unaligned);
- return BTE_SUCCESS;
-}
-
-EXPORT_SYMBOL(bte_unaligned_copy);
-
-/************************************************************************
- * Block Transfer Engine initialization functions.
- *
- ***********************************************************************/
-static void bte_recovery_timeout(struct timer_list *t)
-{
- struct nodepda_s *nodepda = from_timer(nodepda, t, bte_recovery_timer);
-
- bte_error_handler(nodepda);
-}
-
-/*
- * bte_init_node(nodepda, cnode)
- *
- * Initialize the nodepda structure with BTE base addresses and
- * spinlocks.
- */
-void bte_init_node(nodepda_t * mynodepda, cnodeid_t cnode)
-{
- int i;
-
- /*
- * Indicate that all the block transfer engines on this node
- * are available.
- */
-
- /*
- * Allocate one bte_recover_t structure per node. It holds
- * the recovery lock for node. All the bte interface structures
- * will point at this one bte_recover structure to get the lock.
- */
- spin_lock_init(&mynodepda->bte_recovery_lock);
- timer_setup(&mynodepda->bte_recovery_timer, bte_recovery_timeout, 0);
-
- for (i = 0; i < BTES_PER_NODE; i++) {
- u64 *base_addr;
-
- /* Which link status register should we use? */
- base_addr = (u64 *)
- REMOTE_HUB_ADDR(cnodeid_to_nasid(cnode), BTE_BASE_ADDR(i));
- mynodepda->bte_if[i].bte_base_addr = base_addr;
- mynodepda->bte_if[i].bte_source_addr = BTE_SOURCE_ADDR(base_addr);
- mynodepda->bte_if[i].bte_destination_addr = BTE_DEST_ADDR(base_addr);
- mynodepda->bte_if[i].bte_control_addr = BTE_CTRL_ADDR(base_addr);
- mynodepda->bte_if[i].bte_notify_addr = BTE_NOTIF_ADDR(base_addr);
-
- /*
- * Initialize the notification and spinlock
- * so the first transfer can occur.
- */
- mynodepda->bte_if[i].most_rcnt_na =
- &(mynodepda->bte_if[i].notify);
- mynodepda->bte_if[i].notify = BTE_WORD_AVAILABLE;
- spin_lock_init(&mynodepda->bte_if[i].spinlock);
-
- mynodepda->bte_if[i].bte_cnode = cnode;
- mynodepda->bte_if[i].bte_error_count = 0;
- mynodepda->bte_if[i].bte_num = i;
- mynodepda->bte_if[i].cleanup_active = 0;
- mynodepda->bte_if[i].bh_error = 0;
- }
-
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2007 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <asm/sn/sn_sal.h>
-#include "ioerror.h"
-#include <asm/sn/addrs.h>
-#include <asm/sn/shubio.h>
-#include <asm/sn/geo.h>
-#include "xtalk/xwidgetdev.h"
-#include "xtalk/hubdev.h"
-#include <asm/sn/bte.h>
-#include <asm/param.h>
-
-/*
- * Bte error handling is done in two parts. The first captures
- * any crb related errors. Since there can be multiple crbs per
- * interface and multiple interfaces active, we need to wait until
- * all active crbs are completed. This is the first job of the
- * second part error handler. When all bte related CRBs are cleanly
- * completed, it resets the interfaces and gets them ready for new
- * transfers to be queued.
- */
-
-/*
- * Wait until all BTE related CRBs are completed
- * and then reset the interfaces.
- */
-static int shub1_bte_error_handler(struct nodepda_s *err_nodepda)
-{
- struct timer_list *recovery_timer = &err_nodepda->bte_recovery_timer;
- nasid_t nasid;
- int i;
- int valid_crbs;
- ii_imem_u_t imem; /* II IMEM Register */
- ii_icrb0_d_u_t icrbd; /* II CRB Register D */
- ii_ibcr_u_t ibcr;
- ii_icmr_u_t icmr;
- ii_ieclr_u_t ieclr;
-
- BTE_PRINTK(("shub1_bte_error_handler(%p) - %d\n", err_nodepda,
- smp_processor_id()));
-
- if ((err_nodepda->bte_if[0].bh_error == BTE_SUCCESS) &&
- (err_nodepda->bte_if[1].bh_error == BTE_SUCCESS)) {
- BTE_PRINTK(("eh:%p:%d Nothing to do.\n", err_nodepda,
- smp_processor_id()));
- return 1;
- }
-
- /* Determine information about our hub */
- nasid = cnodeid_to_nasid(err_nodepda->bte_if[0].bte_cnode);
-
- /*
- * A BTE transfer can use multiple CRBs. We need to make sure
- * that all the BTE CRBs are complete (or timed out) before
- * attempting to clean up the error. Resetting the BTE while
- * there are still BTE CRBs active will hang the BTE.
- * We should look at all the CRBs to see if they are allocated
- * to the BTE and see if they are still active. When none
- * are active, we can continue with the cleanup.
- *
- * We also want to make sure that the local NI port is up.
- * When a router resets the NI port can go down, while it
- * goes through the LLP handshake, but then comes back up.
- */
- icmr.ii_icmr_regval = REMOTE_HUB_L(nasid, IIO_ICMR);
- if (icmr.ii_icmr_fld_s.i_crb_mark != 0) {
- /*
- * There are errors which still need to be cleaned up by
- * hubiio_crb_error_handler
- */
- mod_timer(recovery_timer, jiffies + (HZ * 5));
- BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
- smp_processor_id()));
- return 1;
- }
- if (icmr.ii_icmr_fld_s.i_crb_vld != 0) {
-
- valid_crbs = icmr.ii_icmr_fld_s.i_crb_vld;
-
- for (i = 0; i < IIO_NUM_CRBS; i++) {
- if (!((1 << i) & valid_crbs)) {
- /* This crb was not marked as valid, ignore */
- continue;
- }
- icrbd.ii_icrb0_d_regval =
- REMOTE_HUB_L(nasid, IIO_ICRB_D(i));
- if (icrbd.d_bteop) {
- mod_timer(recovery_timer, jiffies + (HZ * 5));
- BTE_PRINTK(("eh:%p:%d Valid %d, Giving up\n",
- err_nodepda, smp_processor_id(),
- i));
- return 1;
- }
- }
- }
-
- BTE_PRINTK(("eh:%p:%d Cleaning up\n", err_nodepda, smp_processor_id()));
- /* Re-enable both bte interfaces */
- imem.ii_imem_regval = REMOTE_HUB_L(nasid, IIO_IMEM);
- imem.ii_imem_fld_s.i_b0_esd = imem.ii_imem_fld_s.i_b1_esd = 1;
- REMOTE_HUB_S(nasid, IIO_IMEM, imem.ii_imem_regval);
-
- /* Clear BTE0/1 error bits */
- ieclr.ii_ieclr_regval = 0;
- if (err_nodepda->bte_if[0].bh_error != BTE_SUCCESS)
- ieclr.ii_ieclr_fld_s.i_e_bte_0 = 1;
- if (err_nodepda->bte_if[1].bh_error != BTE_SUCCESS)
- ieclr.ii_ieclr_fld_s.i_e_bte_1 = 1;
- REMOTE_HUB_S(nasid, IIO_IECLR, ieclr.ii_ieclr_regval);
-
- /* Reinitialize both BTE state machines. */
- ibcr.ii_ibcr_regval = REMOTE_HUB_L(nasid, IIO_IBCR);
- ibcr.ii_ibcr_fld_s.i_soft_reset = 1;
- REMOTE_HUB_S(nasid, IIO_IBCR, ibcr.ii_ibcr_regval);
-
- del_timer(recovery_timer);
- return 0;
-}
-
-/*
- * Wait until all BTE related CRBs are completed
- * and then reset the interfaces.
- */
-static int shub2_bte_error_handler(struct nodepda_s *err_nodepda)
-{
- struct timer_list *recovery_timer = &err_nodepda->bte_recovery_timer;
- struct bteinfo_s *bte;
- nasid_t nasid;
- u64 status;
- int i;
-
- nasid = cnodeid_to_nasid(err_nodepda->bte_if[0].bte_cnode);
-
- /*
- * Verify that all the BTEs are complete
- */
- for (i = 0; i < BTES_PER_NODE; i++) {
- bte = &err_nodepda->bte_if[i];
- status = BTE_LNSTAT_LOAD(bte);
- if (status & IBLS_ERROR) {
- bte->bh_error = BTE_SHUB2_ERROR(status);
- continue;
- }
- if (!(status & IBLS_BUSY))
- continue;
- mod_timer(recovery_timer, jiffies + (HZ * 5));
- BTE_PRINTK(("eh:%p:%d Marked Giving up\n", err_nodepda,
- smp_processor_id()));
- return 1;
- }
- if (ia64_sn_bte_recovery(nasid))
- panic("bte_error_handler(): Fatal BTE Error");
-
- del_timer(recovery_timer);
- return 0;
-}
-
-/*
- * Wait until all BTE related CRBs are completed
- * and then reset the interfaces.
- */
-void bte_error_handler(struct nodepda_s *err_nodepda)
-{
- spinlock_t *recovery_lock = &err_nodepda->bte_recovery_lock;
- int i;
- unsigned long irq_flags;
- volatile u64 *notify;
- bte_result_t bh_error;
-
- BTE_PRINTK(("bte_error_handler(%p) - %d\n", err_nodepda,
- smp_processor_id()));
-
- spin_lock_irqsave(recovery_lock, irq_flags);
-
- /*
- * Lock all interfaces on this node to prevent new transfers
- * from being queued.
- */
- for (i = 0; i < BTES_PER_NODE; i++) {
- if (err_nodepda->bte_if[i].cleanup_active) {
- continue;
- }
- spin_lock(&err_nodepda->bte_if[i].spinlock);
- BTE_PRINTK(("eh:%p:%d locked %d\n", err_nodepda,
- smp_processor_id(), i));
- err_nodepda->bte_if[i].cleanup_active = 1;
- }
-
- if (is_shub1()) {
- if (shub1_bte_error_handler(err_nodepda)) {
- spin_unlock_irqrestore(recovery_lock, irq_flags);
- return;
- }
- } else {
- if (shub2_bte_error_handler(err_nodepda)) {
- spin_unlock_irqrestore(recovery_lock, irq_flags);
- return;
- }
- }
-
- for (i = 0; i < BTES_PER_NODE; i++) {
- bh_error = err_nodepda->bte_if[i].bh_error;
- if (bh_error != BTE_SUCCESS) {
- /* There is an error which needs to be notified */
- notify = err_nodepda->bte_if[i].most_rcnt_na;
- BTE_PRINTK(("cnode %d bte %d error=0x%lx\n",
- err_nodepda->bte_if[i].bte_cnode,
- err_nodepda->bte_if[i].bte_num,
- IBLS_ERROR | (u64) bh_error));
- *notify = IBLS_ERROR | bh_error;
- err_nodepda->bte_if[i].bh_error = BTE_SUCCESS;
- }
-
- err_nodepda->bte_if[i].cleanup_active = 0;
- BTE_PRINTK(("eh:%p:%d Unlocked %d\n", err_nodepda,
- smp_processor_id(), i));
- spin_unlock(&err_nodepda->bte_if[i].spinlock);
- }
-
- spin_unlock_irqrestore(recovery_lock, irq_flags);
-}
-
-/*
- * First part error handler. This is called whenever any error CRB interrupt
- * is generated by the II.
- */
-void
-bte_crb_error_handler(cnodeid_t cnode, int btenum,
- int crbnum, ioerror_t * ioe, int bteop)
-{
- struct bteinfo_s *bte;
-
-
- bte = &(NODEPDA(cnode)->bte_if[btenum]);
-
- /*
- * The caller has already figured out the error type, we save that
- * in the bte handle structure for the thread exercising the
- * interface to consume.
- */
- bte->bh_error = ioe->ie_errortype + BTEFAIL_OFFSET;
- bte->bte_error_count++;
-
- BTE_PRINTK(("Got an error on cnode %d bte %d: HW error type 0x%x\n",
- bte->bte_cnode, bte->bte_num, ioe->ie_errortype));
- bte_error_handler(NODEPDA(cnode));
-}
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000,2002-2007 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <asm/delay.h>
-#include <asm/sn/sn_sal.h>
-#include "ioerror.h"
-#include <asm/sn/addrs.h>
-#include <asm/sn/shubio.h>
-#include <asm/sn/geo.h>
-#include "xtalk/xwidgetdev.h"
-#include "xtalk/hubdev.h"
-#include <asm/sn/bte.h>
-
-void hubiio_crb_error_handler(struct hubdev_info *hubdev_info);
-extern void bte_crb_error_handler(cnodeid_t, int, int, ioerror_t *,
- int);
-static irqreturn_t hub_eint_handler(int irq, void *arg)
-{
- struct hubdev_info *hubdev_info;
- struct ia64_sal_retval ret_stuff;
- nasid_t nasid;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
- hubdev_info = (struct hubdev_info *)arg;
- nasid = hubdev_info->hdi_nasid;
-
- if (is_shub1()) {
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
- (u64) nasid, 0, 0, 0, 0, 0, 0);
-
- if ((int)ret_stuff.v0)
- panic("%s: Fatal %s Error", __func__,
- ((nasid & 1) ? "TIO" : "HUBII"));
-
- if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
- (void)hubiio_crb_error_handler(hubdev_info);
- } else
- if (nasid & 1) { /* TIO errors */
- SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
- (u64) nasid, 0, 0, 0, 0, 0, 0);
-
- if ((int)ret_stuff.v0)
- panic("%s: Fatal TIO Error", __func__);
- } else
- bte_error_handler(NODEPDA(nasid_to_cnodeid(nasid)));
-
- return IRQ_HANDLED;
-}
-
-/*
- * Free the hub CRB "crbnum" which encountered an error.
- * Assumption is, error handling was successfully done,
- * and we now want to return the CRB back to Hub for normal usage.
- *
- * In order to free the CRB, all that's needed is to de-allocate it
- *
- * Assumption:
- * No other processor is mucking around with the hub control register.
- * So, upper layer has to single thread this.
- */
-void hubiio_crb_free(struct hubdev_info *hubdev_info, int crbnum)
-{
- ii_icrb0_b_u_t icrbb;
-
- /*
- * The hardware does NOT clear the mark bit, so it must get cleared
- * here to be sure the error is not processed twice.
- */
- icrbb.ii_icrb0_b_regval = REMOTE_HUB_L(hubdev_info->hdi_nasid,
- IIO_ICRB_B(crbnum));
- icrbb.b_mark = 0;
- REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICRB_B(crbnum),
- icrbb.ii_icrb0_b_regval);
- /*
- * Deallocate the register wait till hub indicates it's done.
- */
- REMOTE_HUB_S(hubdev_info->hdi_nasid, IIO_ICDR, (IIO_ICDR_PND | crbnum));
- while (REMOTE_HUB_L(hubdev_info->hdi_nasid, IIO_ICDR) & IIO_ICDR_PND)
- cpu_relax();
-
-}
-
-/*
- * hubiio_crb_error_handler
- *
- * This routine gets invoked when a hub gets an error
- * interrupt. So, the routine is running in interrupt context
- * at error interrupt level.
- * Action:
- * It's responsible for identifying ALL the CRBs that are marked
- * with error, and process them.
- *
- * If you find the CRB that's marked with error, map this to the
- * reason it caused error, and invoke appropriate error handler.
- *
- * XXX Be aware of the information in the context register.
- *
- * NOTE:
- * Use REMOTE_HUB_* macro instead of LOCAL_HUB_* so that the interrupt
- * handler can be run on any node. (not necessarily the node
- * corresponding to the hub that encountered error).
- */
-
-void hubiio_crb_error_handler(struct hubdev_info *hubdev_info)
-{
- nasid_t nasid;
- ii_icrb0_a_u_t icrba; /* II CRB Register A */
- ii_icrb0_b_u_t icrbb; /* II CRB Register B */
- ii_icrb0_c_u_t icrbc; /* II CRB Register C */
- ii_icrb0_d_u_t icrbd; /* II CRB Register D */
- ii_icrb0_e_u_t icrbe; /* II CRB Register D */
- int i;
- int num_errors = 0; /* Num of errors handled */
- ioerror_t ioerror;
-
- nasid = hubdev_info->hdi_nasid;
-
- /*
- * XXX - Add locking for any recovery actions
- */
- /*
- * Scan through all CRBs in the Hub, and handle the errors
- * in any of the CRBs marked.
- */
- for (i = 0; i < IIO_NUM_CRBS; i++) {
- /* Check this crb entry to see if it is in error. */
- icrbb.ii_icrb0_b_regval = REMOTE_HUB_L(nasid, IIO_ICRB_B(i));
-
- if (icrbb.b_mark == 0) {
- continue;
- }
-
- icrba.ii_icrb0_a_regval = REMOTE_HUB_L(nasid, IIO_ICRB_A(i));
-
- IOERROR_INIT(&ioerror);
-
- /* read other CRB error registers. */
- icrbc.ii_icrb0_c_regval = REMOTE_HUB_L(nasid, IIO_ICRB_C(i));
- icrbd.ii_icrb0_d_regval = REMOTE_HUB_L(nasid, IIO_ICRB_D(i));
- icrbe.ii_icrb0_e_regval = REMOTE_HUB_L(nasid, IIO_ICRB_E(i));
-
- IOERROR_SETVALUE(&ioerror, errortype, icrbb.b_ecode);
-
- /* Check if this error is due to BTE operation,
- * and handle it separately.
- */
- if (icrbd.d_bteop ||
- ((icrbb.b_initiator == IIO_ICRB_INIT_BTE0 ||
- icrbb.b_initiator == IIO_ICRB_INIT_BTE1) &&
- (icrbb.b_imsgtype == IIO_ICRB_IMSGT_BTE ||
- icrbb.b_imsgtype == IIO_ICRB_IMSGT_SN1NET))) {
-
- int bte_num;
-
- if (icrbd.d_bteop)
- bte_num = icrbc.c_btenum;
- else /* b_initiator bit 2 gives BTE number */
- bte_num = (icrbb.b_initiator & 0x4) >> 2;
-
- hubiio_crb_free(hubdev_info, i);
-
- bte_crb_error_handler(nasid_to_cnodeid(nasid), bte_num,
- i, &ioerror, icrbd.d_bteop);
- num_errors++;
- continue;
- }
- }
-}
-
-/*
- * Function : hub_error_init
- * Purpose : initialize the error handling requirements for a given hub.
- * Parameters : cnode, the compact nodeid.
- * Assumptions : Called only once per hub, either by a local cpu. Or by a
- * remote cpu, when this hub is headless.(cpuless)
- * Returns : None
- */
-void hub_error_init(struct hubdev_info *hubdev_info)
-{
-
- if (request_irq(SGI_II_ERROR, hub_eint_handler, IRQF_SHARED,
- "SN_hub_error", hubdev_info)) {
- printk(KERN_ERR "hub_error_init: Failed to request_irq for 0x%p\n",
- hubdev_info);
- return;
- }
- irq_set_handler(SGI_II_ERROR, handle_level_irq);
- sn_set_err_irq_affinity(SGI_II_ERROR);
-}
-
-
-/*
- * Function : ice_error_init
- * Purpose : initialize the error handling requirements for a given tio.
- * Parameters : cnode, the compact nodeid.
- * Assumptions : Called only once per tio.
- * Returns : None
- */
-void ice_error_init(struct hubdev_info *hubdev_info)
-{
-
- if (request_irq
- (SGI_TIO_ERROR, (void *)hub_eint_handler, IRQF_SHARED, "SN_TIO_error",
- (void *)hubdev_info)) {
- printk("ice_error_init: request_irq() error hubdev_info 0x%p\n",
- hubdev_info);
- return;
- }
- irq_set_handler(SGI_TIO_ERROR, handle_level_irq);
- sn_set_err_irq_affinity(SGI_TIO_ERROR);
-}
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2001-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <asm/sn/leds.h>
-
-void snidle(int state)
-{
- if (state) {
- if (pda->idle_flag == 0) {
- /*
- * Turn the activity LED off.
- */
- set_led_bits(0, LED_CPU_ACTIVITY);
- }
-
- pda->idle_flag = 1;
- } else {
- /*
- * Turn the activity LED on.
- */
- set_led_bits(LED_CPU_ACTIVITY, LED_CPU_ACTIVITY);
-
- pda->idle_flag = 0;
- }
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <asm/sn/types.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/sn_sal.h>
-#include "xtalk/hubdev.h"
-#include <linux/acpi.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-
-
-/*
- * The code in this file will only be executed when running with
- * a PROM that has ACPI IO support. (i.e., SN_ACPI_BASE_SUPPORT() == 1)
- */
-
-
-/*
- * This value must match the UUID the PROM uses
- * (io/acpi/defblk.c) when building a vendor descriptor.
- */
-struct acpi_vendor_uuid sn_uuid = {
- .subtype = 0,
- .data = { 0x2c, 0xc6, 0xa6, 0xfe, 0x9c, 0x44, 0xda, 0x11,
- 0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 },
-};
-
-struct sn_pcidev_match {
- u8 bus;
- unsigned int devfn;
- acpi_handle handle;
-};
-
-/*
- * Perform the early IO init in PROM.
- */
-static long
-sal_ioif_init(u64 *result)
-{
- struct ia64_sal_retval isrv = {0,0,0,0};
-
- SAL_CALL_NOLOCK(isrv,
- SN_SAL_IOIF_INIT, 0, 0, 0, 0, 0, 0, 0);
- *result = isrv.v0;
- return isrv.status;
-}
-
-/*
- * sn_acpi_hubdev_init() - This function is called by acpi_ns_get_device_callback()
- * for all SGIHUB and SGITIO acpi devices defined in the
- * DSDT. It obtains the hubdev_info pointer from the
- * ACPI vendor resource, which the PROM setup, and sets up the
- * hubdev_info in the pda.
- */
-
-static acpi_status __init
-sn_acpi_hubdev_init(acpi_handle handle, u32 depth, void *context, void **ret)
-{
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- u64 addr;
- struct hubdev_info *hubdev;
- struct hubdev_info *hubdev_ptr;
- int i;
- u64 nasid;
- struct acpi_resource *resource;
- acpi_status status;
- struct acpi_resource_vendor_typed *vendor;
- extern void sn_common_hubdev_init(struct hubdev_info *);
-
- status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
- &sn_uuid, &buffer);
- if (ACPI_FAILURE(status)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR
- "sn_acpi_hubdev_init: acpi_get_vendor_resource() "
- "(0x%x) failed for: %s\n", status,
- (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return AE_OK; /* Continue walking namespace */
- }
-
- resource = buffer.pointer;
- vendor = &resource->data.vendor_typed;
- if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
- sizeof(struct hubdev_info *)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR
- "sn_acpi_hubdev_init: Invalid vendor data length: "
- "%d for: %s\n",
- vendor->byte_length, (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- goto exit;
- }
-
- memcpy(&addr, vendor->byte_data, sizeof(struct hubdev_info *));
- hubdev_ptr = __va((struct hubdev_info *) addr);
-
- nasid = hubdev_ptr->hdi_nasid;
- i = nasid_to_cnodeid(nasid);
- hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
- *hubdev = *hubdev_ptr;
- sn_common_hubdev_init(hubdev);
-
-exit:
- kfree(buffer.pointer);
- return AE_OK; /* Continue walking namespace */
-}
-
-/*
- * sn_get_bussoft_ptr() - The pcibus_bussoft pointer is found in
- * the ACPI Vendor resource for this bus.
- */
-static struct pcibus_bussoft *
-sn_get_bussoft_ptr(struct pci_bus *bus)
-{
- u64 addr;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- acpi_handle handle;
- struct pcibus_bussoft *prom_bussoft_ptr;
- struct acpi_resource *resource;
- acpi_status status;
- struct acpi_resource_vendor_typed *vendor;
-
-
- handle = acpi_device_handle(PCI_CONTROLLER(bus)->companion);
- status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
- &sn_uuid, &buffer);
- if (ACPI_FAILURE(status)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR "%s: "
- "acpi_get_vendor_resource() failed (0x%x) for: %s\n",
- __func__, status, (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return NULL;
- }
- resource = buffer.pointer;
- vendor = &resource->data.vendor_typed;
-
- if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
- sizeof(struct pcibus_bussoft *)) {
- printk(KERN_ERR
- "%s: Invalid vendor data length %d\n",
- __func__, vendor->byte_length);
- kfree(buffer.pointer);
- return NULL;
- }
- memcpy(&addr, vendor->byte_data, sizeof(struct pcibus_bussoft *));
- prom_bussoft_ptr = __va((struct pcibus_bussoft *) addr);
- kfree(buffer.pointer);
-
- return prom_bussoft_ptr;
-}
-
-/*
- * sn_extract_device_info - Extract the pcidev_info and the sn_irq_info
- * pointers from the vendor resource using the
- * provided acpi handle, and copy the structures
- * into the argument buffers.
- */
-static int
-sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
- struct sn_irq_info **sn_irq_info)
-{
- u64 addr;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct sn_irq_info *irq_info, *irq_info_prom;
- struct pcidev_info *pcidev_ptr, *pcidev_prom_ptr;
- struct acpi_resource *resource;
- int ret = 0;
- acpi_status status;
- struct acpi_resource_vendor_typed *vendor;
-
- /*
- * The pointer to this device's pcidev_info structure in
- * the PROM, is in the vendor resource.
- */
- status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
- &sn_uuid, &buffer);
- if (ACPI_FAILURE(status)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR
- "%s: acpi_get_vendor_resource() failed (0x%x) for: %s\n",
- __func__, status, (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return 1;
- }
-
- resource = buffer.pointer;
- vendor = &resource->data.vendor_typed;
- if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
- sizeof(struct pci_devdev_info *)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR
- "%s: Invalid vendor data length: %d for: %s\n",
- __func__, vendor->byte_length,
- (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- ret = 1;
- goto exit;
- }
-
- pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
- if (!pcidev_ptr)
- panic("%s: Unable to alloc memory for pcidev_info", __func__);
-
- memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
- pcidev_prom_ptr = __va(addr);
- memcpy(pcidev_ptr, pcidev_prom_ptr, sizeof(struct pcidev_info));
-
- /* Get the IRQ info */
- irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
- if (!irq_info)
- panic("%s: Unable to alloc memory for sn_irq_info", __func__);
-
- if (pcidev_ptr->pdi_sn_irq_info) {
- irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
- memcpy(irq_info, irq_info_prom, sizeof(struct sn_irq_info));
- }
-
- *pcidev_info = pcidev_ptr;
- *sn_irq_info = irq_info;
-
-exit:
- kfree(buffer.pointer);
- return ret;
-}
-
-static unsigned int
-get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
-{
- unsigned long long adr;
- acpi_handle child;
- unsigned int devfn;
- int function;
- acpi_handle parent;
- int slot;
- acpi_status status;
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- acpi_get_name(device_handle, ACPI_FULL_PATHNAME, &name_buffer);
-
- /*
- * Do an upward search to find the root bus device, and
- * obtain the host devfn from the previous child device.
- */
- child = device_handle;
- while (child) {
- status = acpi_get_parent(child, &parent);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "%s: acpi_get_parent() failed "
- "(0x%x) for: %s\n", __func__, status,
- (char *)name_buffer.pointer);
- panic("%s: Unable to find host devfn\n", __func__);
- }
- if (parent == rootbus_handle)
- break;
- child = parent;
- }
- if (!child) {
- printk(KERN_ERR "%s: Unable to find root bus for: %s\n",
- __func__, (char *)name_buffer.pointer);
- BUG();
- }
-
- status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: %s\n",
- __func__, status, (char *)name_buffer.pointer);
- panic("%s: Unable to find host devfn\n", __func__);
- }
-
- kfree(name_buffer.pointer);
-
- slot = (adr >> 16) & 0xffff;
- function = adr & 0xffff;
- devfn = PCI_DEVFN(slot, function);
- return devfn;
-}
-
-/*
- * find_matching_device - Callback routine to find the ACPI device
- * that matches up with our pci_dev device.
- * Matching is done on bus number and devfn.
- * To find the bus number for a particular
- * ACPI device, we must look at the _BBN method
- * of its parent.
- */
-static acpi_status
-find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
- unsigned long long bbn = -1;
- unsigned long long adr;
- acpi_handle parent = NULL;
- acpi_status status;
- unsigned int devfn;
- int function;
- int slot;
- struct sn_pcidev_match *info = context;
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
- &adr);
- if (ACPI_SUCCESS(status)) {
- status = acpi_get_parent(handle, &parent);
- if (ACPI_FAILURE(status)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR
- "%s: acpi_get_parent() failed (0x%x) for: %s\n",
- __func__, status, (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return AE_OK;
- }
- status = acpi_evaluate_integer(parent, METHOD_NAME__BBN,
- NULL, &bbn);
- if (ACPI_FAILURE(status)) {
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR
- "%s: Failed to find _BBN in parent of: %s\n",
- __func__, (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return AE_OK;
- }
-
- slot = (adr >> 16) & 0xffff;
- function = adr & 0xffff;
- devfn = PCI_DEVFN(slot, function);
- if ((info->devfn == devfn) && (info->bus == bbn)) {
- /* We have a match! */
- info->handle = handle;
- return 1;
- }
- }
- return AE_OK;
-}
-
-/*
- * sn_acpi_get_pcidev_info - Search ACPI namespace for the acpi
- * device matching the specified pci_dev,
- * and return the pcidev info and irq info.
- */
-int
-sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
- struct sn_irq_info **sn_irq_info)
-{
- unsigned int host_devfn;
- struct sn_pcidev_match pcidev_match;
- acpi_handle rootbus_handle;
- unsigned long long segment;
- acpi_status status;
- struct acpi_buffer name_buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- rootbus_handle = acpi_device_handle(PCI_CONTROLLER(dev)->companion);
- status = acpi_evaluate_integer(rootbus_handle, METHOD_NAME__SEG, NULL,
- &segment);
- if (ACPI_SUCCESS(status)) {
- if (segment != pci_domain_nr(dev)) {
- acpi_get_name(rootbus_handle, ACPI_FULL_PATHNAME,
- &name_buffer);
- printk(KERN_ERR
- "%s: Segment number mismatch, 0x%llx vs 0x%x for: %s\n",
- __func__, segment, pci_domain_nr(dev),
- (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return 1;
- }
- } else {
- acpi_get_name(rootbus_handle, ACPI_FULL_PATHNAME, &name_buffer);
- printk(KERN_ERR "%s: Unable to get __SEG from: %s\n",
- __func__, (char *)name_buffer.pointer);
- kfree(name_buffer.pointer);
- return 1;
- }
-
- /*
- * We want to search all devices in this segment/domain
- * of the ACPI namespace for the matching ACPI device,
- * which holds the pcidev_info pointer in its vendor resource.
- */
- pcidev_match.bus = dev->bus->number;
- pcidev_match.devfn = dev->devfn;
- pcidev_match.handle = NULL;
-
- acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX,
- find_matching_device, NULL, &pcidev_match, NULL);
-
- if (!pcidev_match.handle) {
- printk(KERN_ERR
- "%s: Could not find matching ACPI device for %s.\n",
- __func__, pci_name(dev));
- return 1;
- }
-
- if (sn_extract_device_info(pcidev_match.handle, pcidev_info, sn_irq_info))
- return 1;
-
- /* Build up the pcidev_info.pdi_slot_host_handle */
- host_devfn = get_host_devfn(pcidev_match.handle, rootbus_handle);
- (*pcidev_info)->pdi_slot_host_handle =
- ((unsigned long) pci_domain_nr(dev) << 40) |
- /* bus == 0 */
- host_devfn;
- return 0;
-}
-
-/*
- * sn_acpi_slot_fixup - Obtain the pcidev_info and sn_irq_info.
- * Perform any SN specific slot fixup.
- * At present there does not appear to be
- * any generic way to handle a ROM image
- * that has been shadowed by the PROM, so
- * we pass a pointer to it within the
- * pcidev_info structure.
- */
-
-void
-sn_acpi_slot_fixup(struct pci_dev *dev)
-{
- struct pcidev_info *pcidev_info = NULL;
- struct sn_irq_info *sn_irq_info = NULL;
- struct resource *res;
- size_t size;
-
- if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
- panic("%s: Failure obtaining pcidev_info for %s\n",
- __func__, pci_name(dev));
- }
-
- if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
- /*
- * A valid ROM image exists and has been shadowed by the
- * PROM. Setup the pci_dev ROM resource with the address
- * of the shadowed copy, and the actual length of the ROM image.
- */
- size = pci_resource_len(dev, PCI_ROM_RESOURCE);
-
- res = &dev->resource[PCI_ROM_RESOURCE];
-
- pci_disable_rom(dev);
- if (res->parent)
- release_resource(res);
-
- res->start = pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE];
- res->end = res->start + size - 1;
- res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
- IORESOURCE_PCI_FIXED;
- }
- sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
-}
-EXPORT_SYMBOL(sn_acpi_slot_fixup);
-
-
-/*
- * sn_acpi_bus_fixup - Perform SN specific setup of software structs
- * (pcibus_bussoft, pcidev_info) and hardware
- * registers, for the specified bus and devices under it.
- */
-void
-sn_acpi_bus_fixup(struct pci_bus *bus)
-{
- struct pci_dev *pci_dev = NULL;
- struct pcibus_bussoft *prom_bussoft_ptr;
-
- if (!bus->parent) { /* If root bus */
- prom_bussoft_ptr = sn_get_bussoft_ptr(bus);
- if (prom_bussoft_ptr == NULL) {
- printk(KERN_ERR
- "%s: 0x%04x:0x%02x Unable to "
- "obtain prom_bussoft_ptr\n",
- __func__, pci_domain_nr(bus), bus->number);
- return;
- }
- sn_common_bus_fixup(bus, prom_bussoft_ptr);
- }
- list_for_each_entry(pci_dev, &bus->devices, bus_list) {
- sn_acpi_slot_fixup(pci_dev);
- }
-}
-
-/*
- * sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the
- * nodes and root buses in the DSDT. As a result, bus scanning
- * will be initiated by the Linux ACPI code.
- */
-
-void __init
-sn_io_acpi_init(void)
-{
- u64 result;
- long status;
-
- /* SN Altix does not follow the IOSAPIC IRQ routing model */
- acpi_irq_model = ACPI_IRQ_MODEL_PLATFORM;
-
- /* Setup hubdev_info for all SGIHUB/SGITIO devices */
- acpi_get_devices("SGIHUB", sn_acpi_hubdev_init, NULL, NULL);
- acpi_get_devices("SGITIO", sn_acpi_hubdev_init, NULL, NULL);
-
- status = sal_ioif_init(&result);
- if (status || result)
- panic("sal_ioif_init failed: [%lx] %s\n",
- status, ia64_sal_strerror(status));
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/memblock.h>
-#include <linux/export.h>
-#include <linux/slab.h>
-#include <asm/sn/types.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/sn_feature_sets.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/io.h>
-#include <asm/sn/l1.h>
-#include <asm/sn/module.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/simulator.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/tioca_provider.h>
-#include <asm/sn/tioce_provider.h>
-#include "xtalk/hubdev.h"
-#include "xtalk/xwidgetdev.h"
-#include <linux/acpi.h>
-#include <asm/sn/sn2/sn_hwperf.h>
-#include <asm/sn/acpi.h>
-
-extern void sn_init_cpei_timer(void);
-extern void register_sn_procfs(void);
-extern void sn_io_acpi_init(void);
-extern void sn_io_init(void);
-
-
-static struct list_head sn_sysdata_list;
-
-/* sysdata list struct */
-struct sysdata_el {
- struct list_head entry;
- void *sysdata;
-};
-
-int sn_ioif_inited; /* SN I/O infrastructure initialized? */
-
-int sn_acpi_rev; /* SN ACPI revision */
-EXPORT_SYMBOL_GPL(sn_acpi_rev);
-
-struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */
-
-/*
- * Hooks and struct for unsupported pci providers
- */
-
-static dma_addr_t
-sn_default_pci_map(struct pci_dev *pdev, unsigned long paddr, size_t size, int type)
-{
- return 0;
-}
-
-static void
-sn_default_pci_unmap(struct pci_dev *pdev, dma_addr_t addr, int direction)
-{
- return;
-}
-
-static void *
-sn_default_pci_bus_fixup(struct pcibus_bussoft *soft, struct pci_controller *controller)
-{
- return NULL;
-}
-
-static struct sn_pcibus_provider sn_pci_default_provider = {
- .dma_map = sn_default_pci_map,
- .dma_map_consistent = sn_default_pci_map,
- .dma_unmap = sn_default_pci_unmap,
- .bus_fixup = sn_default_pci_bus_fixup,
-};
-
-/*
- * Retrieve the DMA Flush List given nasid, widget, and device.
- * This list is needed to implement the WAR - Flush DMA data on PIO Reads.
- */
-static inline u64
-sal_get_device_dmaflush_list(u64 nasid, u64 widget_num, u64 device_num,
- u64 address)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_DEVICE_DMAFLUSH_LIST,
- (u64) nasid, (u64) widget_num,
- (u64) device_num, (u64) address, 0, 0, 0);
- return ret_stuff.status;
-}
-
-/*
- * sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified
- * device.
- */
-inline struct pcidev_info *
-sn_pcidev_info_get(struct pci_dev *dev)
-{
- struct pcidev_info *pcidev;
-
- list_for_each_entry(pcidev,
- &(SN_PLATFORM_DATA(dev)->pcidev_info), pdi_list) {
- if (pcidev->pdi_linux_pcidev == dev)
- return pcidev;
- }
- return NULL;
-}
-
-/* Older PROM flush WAR
- *
- * 01/16/06 -- This war will be in place until a new official PROM is released.
- * Additionally note that the struct sn_flush_device_war also has to be
- * removed from arch/ia64/sn/include/xtalk/hubdev.h
- */
-
-static s64 sn_device_fixup_war(u64 nasid, u64 widget, int device,
- struct sn_flush_device_common *common)
-{
- struct sn_flush_device_war *war_list;
- struct sn_flush_device_war *dev_entry;
- struct ia64_sal_retval isrv = {0,0,0,0};
-
- printk_once(KERN_WARNING
- "PROM version < 4.50 -- implementing old PROM flush WAR\n");
-
- war_list = kcalloc(DEV_PER_WIDGET, sizeof(*war_list), GFP_KERNEL);
- BUG_ON(!war_list);
-
- SAL_CALL_NOLOCK(isrv, SN_SAL_IOIF_GET_WIDGET_DMAFLUSH_LIST,
- nasid, widget, __pa(war_list), 0, 0, 0 ,0);
- if (isrv.status)
- panic("sn_device_fixup_war failed: %s\n",
- ia64_sal_strerror(isrv.status));
-
- dev_entry = war_list + device;
- memcpy(common,dev_entry, sizeof(*common));
- kfree(war_list);
-
- return isrv.status;
-}
-
-/*
- * sn_common_hubdev_init() - This routine is called to initialize the HUB data
- * structure for each node in the system.
- */
-void __init
-sn_common_hubdev_init(struct hubdev_info *hubdev)
-{
-
- struct sn_flush_device_kernel *sn_flush_device_kernel;
- struct sn_flush_device_kernel *dev_entry;
- s64 status;
- int widget, device, size;
-
- /* Attach the error interrupt handlers */
- if (hubdev->hdi_nasid & 1) /* If TIO */
- ice_error_init(hubdev);
- else
- hub_error_init(hubdev);
-
- for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++)
- hubdev->hdi_xwidget_info[widget].xwi_hubinfo = hubdev;
-
- if (!hubdev->hdi_flush_nasid_list.widget_p)
- return;
-
- size = (HUB_WIDGET_ID_MAX + 1) *
- sizeof(struct sn_flush_device_kernel *);
- hubdev->hdi_flush_nasid_list.widget_p =
- kzalloc(size, GFP_KERNEL);
- BUG_ON(!hubdev->hdi_flush_nasid_list.widget_p);
-
- for (widget = 0; widget <= HUB_WIDGET_ID_MAX; widget++) {
- size = DEV_PER_WIDGET *
- sizeof(struct sn_flush_device_kernel);
- sn_flush_device_kernel = kzalloc(size, GFP_KERNEL);
- BUG_ON(!sn_flush_device_kernel);
-
- dev_entry = sn_flush_device_kernel;
- for (device = 0; device < DEV_PER_WIDGET;
- device++, dev_entry++) {
- size = sizeof(struct sn_flush_device_common);
- dev_entry->common = kzalloc(size, GFP_KERNEL);
- BUG_ON(!dev_entry->common);
- if (sn_prom_feature_available(PRF_DEVICE_FLUSH_LIST))
- status = sal_get_device_dmaflush_list(
- hubdev->hdi_nasid, widget, device,
- (u64)(dev_entry->common));
- else
- status = sn_device_fixup_war(hubdev->hdi_nasid,
- widget, device,
- dev_entry->common);
- if (status != SALRET_OK)
- panic("SAL call failed: %s\n",
- ia64_sal_strerror(status));
-
- spin_lock_init(&dev_entry->sfdl_flush_lock);
- }
-
- if (sn_flush_device_kernel)
- hubdev->hdi_flush_nasid_list.widget_p[widget] =
- sn_flush_device_kernel;
- }
-}
-
-void sn_pci_unfixup_slot(struct pci_dev *dev)
-{
- struct pci_dev *host_pci_dev = SN_PCIDEV_INFO(dev)->host_pci_dev;
-
- sn_irq_unfixup(dev);
- pci_dev_put(host_pci_dev);
- pci_dev_put(dev);
-}
-
-/*
- * sn_pci_fixup_slot()
- */
-void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info,
- struct sn_irq_info *sn_irq_info)
-{
- int segment = pci_domain_nr(dev->bus);
- struct pcibus_bussoft *bs;
- struct pci_dev *host_pci_dev;
- unsigned int bus_no, devfn;
-
- pci_dev_get(dev); /* for the sysdata pointer */
-
- /* Add pcidev_info to list in pci_controller.platform_data */
- list_add_tail(&pcidev_info->pdi_list,
- &(SN_PLATFORM_DATA(dev->bus)->pcidev_info));
- /*
- * Using the PROMs values for the PCI host bus, get the Linux
- * PCI host_pci_dev struct and set up host bus linkages
- */
-
- bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff;
- devfn = pcidev_info->pdi_slot_host_handle & 0xffffffff;
- host_pci_dev = pci_get_domain_bus_and_slot(segment, bus_no, devfn);
-
- pcidev_info->host_pci_dev = host_pci_dev;
- pcidev_info->pdi_linux_pcidev = dev;
- pcidev_info->pdi_host_pcidev_info = SN_PCIDEV_INFO(host_pci_dev);
- bs = SN_PCIBUS_BUSSOFT(dev->bus);
- pcidev_info->pdi_pcibus_info = bs;
-
- if (bs && bs->bs_asic_type < PCIIO_ASIC_MAX_TYPES) {
- SN_PCIDEV_BUSPROVIDER(dev) = sn_pci_provider[bs->bs_asic_type];
- } else {
- SN_PCIDEV_BUSPROVIDER(dev) = &sn_pci_default_provider;
- }
-
- /* Only set up IRQ stuff if this device has a host bus context */
- if (bs && sn_irq_info->irq_irq) {
- pcidev_info->pdi_sn_irq_info = sn_irq_info;
- dev->irq = pcidev_info->pdi_sn_irq_info->irq_irq;
- sn_irq_fixup(dev, sn_irq_info);
- } else {
- pcidev_info->pdi_sn_irq_info = NULL;
- kfree(sn_irq_info);
- }
-}
-
-/*
- * sn_common_bus_fixup - Perform platform specific bus fixup.
- * Execute the ASIC specific fixup routine
- * for this bus.
- */
-void
-sn_common_bus_fixup(struct pci_bus *bus,
- struct pcibus_bussoft *prom_bussoft_ptr)
-{
- int cnode;
- struct pci_controller *controller;
- struct hubdev_info *hubdev_info;
- int nasid;
- void *provider_soft;
- struct sn_pcibus_provider *provider;
- struct sn_platform_data *sn_platform_data;
-
- controller = PCI_CONTROLLER(bus);
- /*
- * Per-provider fixup. Copies the bus soft structure from prom
- * to local area and links SN_PCIBUS_BUSSOFT().
- */
-
- if (prom_bussoft_ptr->bs_asic_type >= PCIIO_ASIC_MAX_TYPES) {
- printk(KERN_WARNING "sn_common_bus_fixup: Unsupported asic type, %d",
- prom_bussoft_ptr->bs_asic_type);
- return;
- }
-
- if (prom_bussoft_ptr->bs_asic_type == PCIIO_ASIC_TYPE_PPB)
- return; /* no further fixup necessary */
-
- provider = sn_pci_provider[prom_bussoft_ptr->bs_asic_type];
- if (provider == NULL)
- panic("sn_common_bus_fixup: No provider registered for this asic type, %d",
- prom_bussoft_ptr->bs_asic_type);
-
- if (provider->bus_fixup)
- provider_soft = (*provider->bus_fixup) (prom_bussoft_ptr,
- controller);
- else
- provider_soft = NULL;
-
- /*
- * Generic bus fixup goes here. Don't reference prom_bussoft_ptr
- * after this point.
- */
- controller->platform_data = kzalloc(sizeof(struct sn_platform_data),
- GFP_KERNEL);
- BUG_ON(controller->platform_data == NULL);
- sn_platform_data =
- (struct sn_platform_data *) controller->platform_data;
- sn_platform_data->provider_soft = provider_soft;
- INIT_LIST_HEAD(&((struct sn_platform_data *)
- controller->platform_data)->pcidev_info);
- nasid = NASID_GET(SN_PCIBUS_BUSSOFT(bus)->bs_base);
- cnode = nasid_to_cnodeid(nasid);
- hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
- SN_PCIBUS_BUSSOFT(bus)->bs_xwidget_info =
- &(hubdev_info->hdi_xwidget_info[SN_PCIBUS_BUSSOFT(bus)->bs_xid]);
-
- /*
- * If the node information we obtained during the fixup phase is
- * invalid then set controller->node to -1 (undetermined)
- */
- if (controller->node >= num_online_nodes()) {
- struct pcibus_bussoft *b = SN_PCIBUS_BUSSOFT(bus);
-
- printk(KERN_WARNING "Device ASIC=%u XID=%u PBUSNUM=%u "
- "L_IO=%llx L_MEM=%llx BASE=%llx\n",
- b->bs_asic_type, b->bs_xid, b->bs_persist_busnum,
- b->bs_legacy_io, b->bs_legacy_mem, b->bs_base);
- printk(KERN_WARNING "on node %d but only %d nodes online."
- "Association set to undetermined.\n",
- controller->node, num_online_nodes());
- controller->node = -1;
- }
-}
-
-void sn_bus_store_sysdata(struct pci_dev *dev)
-{
- struct sysdata_el *element;
-
- element = kzalloc(sizeof(struct sysdata_el), GFP_KERNEL);
- if (!element) {
- dev_dbg(&dev->dev, "%s: out of memory!\n", __func__);
- return;
- }
- element->sysdata = SN_PCIDEV_INFO(dev);
- list_add(&element->entry, &sn_sysdata_list);
-}
-
-void sn_bus_free_sysdata(void)
-{
- struct sysdata_el *element;
- struct list_head *list, *safe;
-
- list_for_each_safe(list, safe, &sn_sysdata_list) {
- element = list_entry(list, struct sysdata_el, entry);
- list_del(&element->entry);
- list_del(&(((struct pcidev_info *)
- (element->sysdata))->pdi_list));
- kfree(element->sysdata);
- kfree(element);
- }
- return;
-}
-
-/*
- * hubdev_init_node() - Creates the HUB data structure and link them to it's
- * own NODE specific data area.
- */
-void __init hubdev_init_node(nodepda_t * npda, cnodeid_t node)
-{
- struct hubdev_info *hubdev_info;
- int size;
-
- size = sizeof(struct hubdev_info);
-
- if (node >= num_online_nodes()) /* Headless/memless IO nodes */
- node = 0;
-
- hubdev_info = (struct hubdev_info *)memblock_alloc_node(size,
- SMP_CACHE_BYTES,
- node);
- if (!hubdev_info)
- panic("%s: Failed to allocate %d bytes align=0x%x nid=%d\n",
- __func__, size, SMP_CACHE_BYTES, node);
-
- npda->pdinfo = (void *)hubdev_info;
-}
-
-geoid_t
-cnodeid_get_geoid(cnodeid_t cnode)
-{
- struct hubdev_info *hubdev;
-
- hubdev = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
- return hubdev->hdi_geoid;
-}
-
-void sn_generate_path(struct pci_bus *pci_bus, char *address)
-{
- nasid_t nasid;
- cnodeid_t cnode;
- geoid_t geoid;
- moduleid_t moduleid;
- u16 bricktype;
-
- nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base);
- cnode = nasid_to_cnodeid(nasid);
- geoid = cnodeid_get_geoid(cnode);
- moduleid = geo_module(geoid);
-
- sprintf(address, "module_%c%c%c%c%.2d",
- '0'+RACK_GET_CLASS(MODULE_GET_RACK(moduleid)),
- '0'+RACK_GET_GROUP(MODULE_GET_RACK(moduleid)),
- '0'+RACK_GET_NUM(MODULE_GET_RACK(moduleid)),
- MODULE_GET_BTCHAR(moduleid), MODULE_GET_BPOS(moduleid));
-
- /* Tollhouse requires slot id to be displayed */
- bricktype = MODULE_GET_BTYPE(moduleid);
- if ((bricktype == L1_BRICKTYPE_191010) ||
- (bricktype == L1_BRICKTYPE_1932))
- sprintf(address + strlen(address), "^%d",
- geo_slot(geoid));
-}
-
-void sn_pci_fixup_bus(struct pci_bus *bus)
-{
-
- if (SN_ACPI_BASE_SUPPORT())
- sn_acpi_bus_fixup(bus);
- else
- sn_bus_fixup(bus);
-}
-
-/*
- * sn_io_early_init - Perform early IO (and some non-IO) initialization.
- * In particular, setup the sn_pci_provider[] array.
- * This needs to be done prior to any bus scanning
- * (acpi_scan_init()) in the ACPI case, as the SN
- * bus fixup code will reference the array.
- */
-static int __init
-sn_io_early_init(void)
-{
- int i;
-
- if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
- return 0;
-
- /* we set the acpi revision to that of the DSDT table OEM rev. */
- {
- struct acpi_table_header *header = NULL;
-
- acpi_get_table(ACPI_SIG_DSDT, 1, &header);
- BUG_ON(header == NULL);
- sn_acpi_rev = header->oem_revision;
- }
-
- /*
- * prime sn_pci_provider[]. Individual provider init routines will
- * override their respective default entries.
- */
-
- for (i = 0; i < PCIIO_ASIC_MAX_TYPES; i++)
- sn_pci_provider[i] = &sn_pci_default_provider;
-
- pcibr_init_provider();
- tioca_init_provider();
- tioce_init_provider();
-
- sn_irq_lh_init();
- INIT_LIST_HEAD(&sn_sysdata_list);
- sn_init_cpei_timer();
-
-#ifdef CONFIG_PROC_FS
- register_sn_procfs();
-#endif
-
- {
- struct acpi_table_header *header;
- (void)acpi_get_table(ACPI_SIG_DSDT, 1, &header);
- printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n",
- header->oem_revision);
- }
- if (SN_ACPI_BASE_SUPPORT())
- sn_io_acpi_init();
- else
- sn_io_init();
- return 0;
-}
-
-arch_initcall(sn_io_early_init);
-
-/*
- * sn_io_late_init() - Perform any final platform specific IO initialization.
- */
-
-int __init
-sn_io_late_init(void)
-{
- struct pci_bus *bus;
- struct pcibus_bussoft *bussoft;
- cnodeid_t cnode;
- nasid_t nasid;
- cnodeid_t near_cnode;
-
- if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
- return 0;
-
- /*
- * Setup closest node in pci_controller->node for
- * PIC, TIOCP, TIOCE (TIOCA does it during bus fixup using
- * info from the PROM).
- */
- bus = NULL;
- while ((bus = pci_find_next_bus(bus)) != NULL) {
- bussoft = SN_PCIBUS_BUSSOFT(bus);
- nasid = NASID_GET(bussoft->bs_base);
- cnode = nasid_to_cnodeid(nasid);
- if ((bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCP) ||
- (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_TIOCE) ||
- (bussoft->bs_asic_type == PCIIO_ASIC_TYPE_PIC)) {
- /* PCI Bridge: find nearest node with CPUs */
- int e = sn_hwperf_get_nearest_node(cnode, NULL,
- &near_cnode);
- if (e < 0) {
- near_cnode = (cnodeid_t)-1; /* use any node */
- printk(KERN_WARNING "sn_io_late_init: failed "
- "to find near node with CPUs for "
- "node %d, err=%d\n", cnode, e);
- }
- PCI_CONTROLLER(bus)->node = near_cnode;
- }
- }
-
- sn_ioif_inited = 1; /* SN I/O infrastructure now initialized */
-
- return 0;
-}
-
-fs_initcall(sn_io_late_init);
-
-EXPORT_SYMBOL(sn_pci_unfixup_slot);
-EXPORT_SYMBOL(sn_bus_store_sysdata);
-EXPORT_SYMBOL(sn_bus_free_sysdata);
-EXPORT_SYMBOL(sn_generate_path);
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/sn/types.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/io.h>
-#include <asm/sn/module.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/sn_sal.h>
-#include "xtalk/hubdev.h"
-
-/*
- * The code in this file will only be executed when running with
- * a PROM that does _not_ have base ACPI IO support.
- * (i.e., SN_ACPI_BASE_SUPPORT() == 0)
- */
-
-static int max_segment_number; /* Default highest segment number */
-static int max_pcibus_number = 255; /* Default highest pci bus number */
-
-
-/*
- * Retrieve the hub device info structure for the given nasid.
- */
-static inline u64 sal_get_hubdev_info(u64 handle, u64 address)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_HUBDEV_INFO,
- (u64) handle, (u64) address, 0, 0, 0, 0, 0);
- return ret_stuff.v0;
-}
-
-/*
- * Retrieve the pci bus information given the bus number.
- */
-static inline u64 sal_get_pcibus_info(u64 segment, u64 busnum, u64 address)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_PCIBUS_INFO,
- (u64) segment, (u64) busnum, (u64) address, 0, 0, 0, 0);
- return ret_stuff.v0;
-}
-
-/*
- * Retrieve the pci device information given the bus and device|function number.
- */
-static inline u64
-sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
- u64 sn_irq_info)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
- (u64) segment, (u64) bus_number, (u64) devfn,
- (u64) pci_dev,
- sn_irq_info, 0, 0);
- return ret_stuff.v0;
-}
-
-
-/*
- * sn_fixup_ionodes() - This routine initializes the HUB data structure for
- * each node in the system. This function is only
- * executed when running with a non-ACPI capable PROM.
- */
-static void __init sn_fixup_ionodes(void)
-{
-
- struct hubdev_info *hubdev;
- u64 status;
- u64 nasid;
- int i;
- extern void sn_common_hubdev_init(struct hubdev_info *);
-
- /*
- * Get SGI Specific HUB chipset information.
- * Inform Prom that this kernel can support domain bus numbering.
- */
- for (i = 0; i < num_cnodes; i++) {
- hubdev = (struct hubdev_info *)(NODEPDA(i)->pdinfo);
- nasid = cnodeid_to_nasid(i);
- hubdev->max_segment_number = 0xffffffff;
- hubdev->max_pcibus_number = 0xff;
- status = sal_get_hubdev_info(nasid, (u64) __pa(hubdev));
- if (status)
- continue;
-
- /* Save the largest Domain and pcibus numbers found. */
- if (hubdev->max_segment_number) {
- /*
- * Dealing with a Prom that supports segments.
- */
- max_segment_number = hubdev->max_segment_number;
- max_pcibus_number = hubdev->max_pcibus_number;
- }
- sn_common_hubdev_init(hubdev);
- }
-}
-
-/*
- * sn_pci_legacy_window_fixup - Setup PCI resources for
- * legacy IO and MEM space. This needs to
- * be done here, as the PROM does not have
- * ACPI support defining the root buses
- * and their resources (_CRS),
- */
-static void
-sn_legacy_pci_window_fixup(struct resource *res,
- u64 legacy_io, u64 legacy_mem)
-{
- res[0].name = "legacy_io";
- res[0].flags = IORESOURCE_IO;
- res[0].start = legacy_io;
- res[0].end = res[0].start + 0xffff;
- res[0].parent = &ioport_resource;
- res[1].name = "legacy_mem";
- res[1].flags = IORESOURCE_MEM;
- res[1].start = legacy_mem;
- res[1].end = res[1].start + (1024 * 1024) - 1;
- res[1].parent = &iomem_resource;
-}
-
-/*
- * sn_io_slot_fixup() - We are not running with an ACPI capable PROM,
- * and need to convert the pci_dev->resource
- * 'start' and 'end' addresses to mapped addresses,
- * and setup the pci_controller->window array entries.
- */
-void
-sn_io_slot_fixup(struct pci_dev *dev)
-{
- int idx;
- struct resource *res;
- unsigned long size;
- struct pcidev_info *pcidev_info;
- struct sn_irq_info *sn_irq_info;
- int status;
-
- pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
- if (!pcidev_info)
- panic("%s: Unable to alloc memory for pcidev_info", __func__);
-
- sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
- if (!sn_irq_info)
- panic("%s: Unable to alloc memory for sn_irq_info", __func__);
-
- /* Call to retrieve pci device information needed by kernel. */
- status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
- (u64) dev->bus->number,
- dev->devfn,
- (u64) __pa(pcidev_info),
- (u64) __pa(sn_irq_info));
-
- BUG_ON(status); /* Cannot get platform pci device information */
-
-
- /* Copy over PIO Mapped Addresses */
- for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
- if (!pcidev_info->pdi_pio_mapped_addr[idx])
- continue;
-
- res = &dev->resource[idx];
-
- size = res->end - res->start;
- if (size == 0)
- continue;
-
- res->start = pcidev_info->pdi_pio_mapped_addr[idx];
- res->end = res->start + size;
-
- /*
- * if it's already in the device structure, remove it before
- * inserting
- */
- if (res->parent && res->parent->child)
- release_resource(res);
-
- if (res->flags & IORESOURCE_IO)
- insert_resource(&ioport_resource, res);
- else
- insert_resource(&iomem_resource, res);
- /*
- * If ROM, mark as shadowed in PROM.
- */
- if (idx == PCI_ROM_RESOURCE) {
- pci_disable_rom(dev);
- res->flags = IORESOURCE_MEM | IORESOURCE_ROM_SHADOW |
- IORESOURCE_PCI_FIXED;
- }
- }
-
- sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
-}
-EXPORT_SYMBOL(sn_io_slot_fixup);
-
-/*
- * sn_pci_controller_fixup() - This routine sets up a bus's resources
- * consistent with the Linux PCI abstraction layer.
- */
-static void __init
-sn_pci_controller_fixup(int segment, int busnum, struct pci_bus *bus)
-{
- s64 status = 0;
- struct pci_controller *controller;
- struct pcibus_bussoft *prom_bussoft_ptr;
- struct resource *res;
- LIST_HEAD(resources);
-
- status = sal_get_pcibus_info((u64) segment, (u64) busnum,
- (u64) ia64_tpa(&prom_bussoft_ptr));
- if (status > 0)
- return; /*bus # does not exist */
- prom_bussoft_ptr = __va(prom_bussoft_ptr);
-
- controller = kzalloc(sizeof(*controller), GFP_KERNEL);
- BUG_ON(!controller);
- controller->segment = segment;
-
- res = kcalloc(2, sizeof(struct resource), GFP_KERNEL);
- BUG_ON(!res);
-
- /*
- * Temporarily save the prom_bussoft_ptr for use by sn_bus_fixup().
- * (platform_data will be overwritten later in sn_common_bus_fixup())
- */
- controller->platform_data = prom_bussoft_ptr;
-
- sn_legacy_pci_window_fixup(res,
- prom_bussoft_ptr->bs_legacy_io,
- prom_bussoft_ptr->bs_legacy_mem);
- pci_add_resource_offset(&resources, &res[0],
- prom_bussoft_ptr->bs_legacy_io);
- pci_add_resource_offset(&resources, &res[1],
- prom_bussoft_ptr->bs_legacy_mem);
-
- bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, controller,
- &resources);
- if (bus == NULL) {
- kfree(res);
- kfree(controller);
- return;
- }
- pci_bus_add_devices(bus);
-}
-
-/*
- * sn_bus_fixup
- */
-void
-sn_bus_fixup(struct pci_bus *bus)
-{
- struct pci_dev *pci_dev = NULL;
- struct pcibus_bussoft *prom_bussoft_ptr;
-
- if (!bus->parent) { /* If root bus */
- prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data;
- if (prom_bussoft_ptr == NULL) {
- printk(KERN_ERR
- "sn_bus_fixup: 0x%04x:0x%02x Unable to "
- "obtain prom_bussoft_ptr\n",
- pci_domain_nr(bus), bus->number);
- return;
- }
- sn_common_bus_fixup(bus, prom_bussoft_ptr);
- }
- list_for_each_entry(pci_dev, &bus->devices, bus_list) {
- sn_io_slot_fixup(pci_dev);
- }
-
-}
-
-/*
- * sn_io_init - PROM does not have ACPI support to define nodes or root buses,
- * so we need to do things the hard way, including initiating the
- * bus scanning ourselves.
- */
-
-void __init sn_io_init(void)
-{
- int i, j;
-
- sn_fixup_ionodes();
-
- /* busses are not known yet ... */
- for (i = 0; i <= max_segment_number; i++)
- for (j = 0; j <= max_pcibus_number; j++)
- sn_pci_controller_fixup(i, j, NULL);
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2003, 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/acpi.h>
-#include <asm/io.h>
-#include <asm/delay.h>
-#include <asm/vga.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/simulator.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/acpi.h>
-
-#define IS_LEGACY_VGA_IOPORT(p) \
- (((p) >= 0x3b0 && (p) <= 0x3bb) || ((p) >= 0x3c0 && (p) <= 0x3df))
-
-/**
- * sn_io_addr - convert an in/out port to an i/o address
- * @port: port to convert
- *
- * Legacy in/out instructions are converted to ld/st instructions
- * on IA64. This routine will convert a port number into a valid
- * SN i/o address. Used by sn_in*() and sn_out*().
- */
-
-void *sn_io_addr(unsigned long port)
-{
- if (!IS_RUNNING_ON_SIMULATOR()) {
- if (IS_LEGACY_VGA_IOPORT(port))
- return (__ia64_mk_io_addr(port));
- /* On sn2, legacy I/O ports don't point at anything */
- if (port < (64 * 1024))
- return NULL;
- if (SN_ACPI_BASE_SUPPORT())
- return (__ia64_mk_io_addr(port));
- else
- return ((void *)(port | __IA64_UNCACHED_OFFSET));
- } else {
- /* but the simulator uses them... */
- unsigned long addr;
-
- /*
- * word align port, but need more than 10 bits
- * for accessing registers in bedrock local block
- * (so we don't do port&0xfff)
- */
- addr = (is_shub2() ? 0xc00000028c000000UL : 0xc0000087cc000000UL) | ((port >> 2) << 12);
- if ((port >= 0x1f0 && port <= 0x1f7) || port == 0x3f6 || port == 0x3f7)
- addr |= port;
- return (void *)addr;
- }
-}
-
-EXPORT_SYMBOL(sn_io_addr);
-
-/**
- * __sn_mmiowb - I/O space memory barrier
- *
- * See arch/ia64/include/asm/io.h and Documentation/driver-api/device-io.rst
- * for details.
- *
- * On SN2, we wait for the PIO_WRITE_STATUS SHub register to clear.
- * See PV 871084 for details about the WAR about zero value.
- *
- */
-void __sn_mmiowb(void)
-{
- volatile unsigned long *adr = pda->pio_write_status_addr;
- unsigned long val = pda->pio_write_status_val;
-
- while ((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) != val)
- cpu_relax();
-}
-
-EXPORT_SYMBOL(__sn_mmiowb);
+++ /dev/null
-/*
- * Platform dependent support for SGI SN
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2008 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/irq.h>
-#include <linux/spinlock.h>
-#include <linux/init.h>
-#include <linux/rculist.h>
-#include <linux/slab.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/sn_feature_sets.h>
-
-static void register_intr_pda(struct sn_irq_info *sn_irq_info);
-static void unregister_intr_pda(struct sn_irq_info *sn_irq_info);
-
-extern int sn_ioif_inited;
-struct list_head **sn_irq_lh;
-static DEFINE_SPINLOCK(sn_irq_info_lock); /* non-IRQ lock */
-
-u64 sn_intr_alloc(nasid_t local_nasid, int local_widget,
- struct sn_irq_info *sn_irq_info,
- int req_irq, nasid_t req_nasid,
- int req_slice)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_INTERRUPT,
- (u64) SAL_INTR_ALLOC, (u64) local_nasid,
- (u64) local_widget, __pa(sn_irq_info), (u64) req_irq,
- (u64) req_nasid, (u64) req_slice);
-
- return ret_stuff.status;
-}
-
-void sn_intr_free(nasid_t local_nasid, int local_widget,
- struct sn_irq_info *sn_irq_info)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_INTERRUPT,
- (u64) SAL_INTR_FREE, (u64) local_nasid,
- (u64) local_widget, (u64) sn_irq_info->irq_irq,
- (u64) sn_irq_info->irq_cookie, 0, 0);
-}
-
-u64 sn_intr_redirect(nasid_t local_nasid, int local_widget,
- struct sn_irq_info *sn_irq_info,
- nasid_t req_nasid, int req_slice)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_INTERRUPT,
- (u64) SAL_INTR_REDIRECT, (u64) local_nasid,
- (u64) local_widget, __pa(sn_irq_info),
- (u64) req_nasid, (u64) req_slice, 0);
-
- return ret_stuff.status;
-}
-
-static unsigned int sn_startup_irq(struct irq_data *data)
-{
- return 0;
-}
-
-static void sn_shutdown_irq(struct irq_data *data)
-{
-}
-
-extern void ia64_mca_register_cpev(int);
-
-static void sn_disable_irq(struct irq_data *data)
-{
- if (data->irq == local_vector_to_irq(IA64_CPE_VECTOR))
- ia64_mca_register_cpev(0);
-}
-
-static void sn_enable_irq(struct irq_data *data)
-{
- if (data->irq == local_vector_to_irq(IA64_CPE_VECTOR))
- ia64_mca_register_cpev(data->irq);
-}
-
-static void sn_ack_irq(struct irq_data *data)
-{
- u64 event_occurred, mask;
- unsigned int irq = data->irq & 0xff;
-
- event_occurred = HUB_L((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED));
- mask = event_occurred & SH_ALL_INT_MASK;
- HUB_S((u64*)LOCAL_MMR_ADDR(SH_EVENT_OCCURRED_ALIAS), mask);
- __set_bit(irq, (volatile void *)pda->sn_in_service_ivecs);
-
- irq_move_irq(data);
-}
-
-struct sn_irq_info *sn_retarget_vector(struct sn_irq_info *sn_irq_info,
- nasid_t nasid, int slice)
-{
- int vector;
- int cpuid;
-#ifdef CONFIG_SMP
- int cpuphys;
-#endif
- int64_t bridge;
- int local_widget, status;
- nasid_t local_nasid;
- struct sn_irq_info *new_irq_info;
- struct sn_pcibus_provider *pci_provider;
-
- bridge = (u64) sn_irq_info->irq_bridge;
- if (!bridge) {
- return NULL; /* irq is not a device interrupt */
- }
-
- local_nasid = NASID_GET(bridge);
-
- if (local_nasid & 1)
- local_widget = TIO_SWIN_WIDGETNUM(bridge);
- else
- local_widget = SWIN_WIDGETNUM(bridge);
- vector = sn_irq_info->irq_irq;
-
- /* Make use of SAL_INTR_REDIRECT if PROM supports it */
- status = sn_intr_redirect(local_nasid, local_widget, sn_irq_info, nasid, slice);
- if (!status) {
- new_irq_info = sn_irq_info;
- goto finish_up;
- }
-
- /*
- * PROM does not support SAL_INTR_REDIRECT, or it failed.
- * Revert to old method.
- */
- new_irq_info = kmemdup(sn_irq_info, sizeof(struct sn_irq_info),
- GFP_ATOMIC);
- if (new_irq_info == NULL)
- return NULL;
-
- /* Free the old PROM new_irq_info structure */
- sn_intr_free(local_nasid, local_widget, new_irq_info);
- unregister_intr_pda(new_irq_info);
-
- /* allocate a new PROM new_irq_info struct */
- status = sn_intr_alloc(local_nasid, local_widget,
- new_irq_info, vector,
- nasid, slice);
-
- /* SAL call failed */
- if (status) {
- kfree(new_irq_info);
- return NULL;
- }
-
- register_intr_pda(new_irq_info);
- spin_lock(&sn_irq_info_lock);
- list_replace_rcu(&sn_irq_info->list, &new_irq_info->list);
- spin_unlock(&sn_irq_info_lock);
- kfree_rcu(sn_irq_info, rcu);
-
-
-finish_up:
- /* Update kernels new_irq_info with new target info */
- cpuid = nasid_slice_to_cpuid(new_irq_info->irq_nasid,
- new_irq_info->irq_slice);
- new_irq_info->irq_cpuid = cpuid;
-
- pci_provider = sn_pci_provider[new_irq_info->irq_bridge_type];
-
- /*
- * If this represents a line interrupt, target it. If it's
- * an msi (irq_int_bit < 0), it's already targeted.
- */
- if (new_irq_info->irq_int_bit >= 0 &&
- pci_provider && pci_provider->target_interrupt)
- (pci_provider->target_interrupt)(new_irq_info);
-
-#ifdef CONFIG_SMP
- cpuphys = cpu_physical_id(cpuid);
- set_irq_affinity_info((vector & 0xff), cpuphys, 0);
-#endif
-
- return new_irq_info;
-}
-
-static int sn_set_affinity_irq(struct irq_data *data,
- const struct cpumask *mask, bool force)
-{
- struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
- unsigned int irq = data->irq;
- nasid_t nasid;
- int slice;
-
- nasid = cpuid_to_nasid(cpumask_first_and(mask, cpu_online_mask));
- slice = cpuid_to_slice(cpumask_first_and(mask, cpu_online_mask));
-
- list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
- sn_irq_lh[irq], list)
- (void)sn_retarget_vector(sn_irq_info, nasid, slice);
-
- return 0;
-}
-
-#ifdef CONFIG_SMP
-void sn_set_err_irq_affinity(unsigned int irq)
-{
- /*
- * On systems which support CPU disabling (SHub2), all error interrupts
- * are targeted at the boot CPU.
- */
- if (is_shub2() && sn_prom_feature_available(PRF_CPU_DISABLE_SUPPORT))
- set_irq_affinity_info(irq, cpu_physical_id(0), 0);
-}
-#else
-void sn_set_err_irq_affinity(unsigned int irq) { }
-#endif
-
-static void
-sn_mask_irq(struct irq_data *data)
-{
-}
-
-static void
-sn_unmask_irq(struct irq_data *data)
-{
-}
-
-struct irq_chip irq_type_sn = {
- .name = "SN hub",
- .irq_startup = sn_startup_irq,
- .irq_shutdown = sn_shutdown_irq,
- .irq_enable = sn_enable_irq,
- .irq_disable = sn_disable_irq,
- .irq_ack = sn_ack_irq,
- .irq_mask = sn_mask_irq,
- .irq_unmask = sn_unmask_irq,
- .irq_set_affinity = sn_set_affinity_irq
-};
-
-ia64_vector sn_irq_to_vector(int irq)
-{
- if (irq >= IA64_NUM_VECTORS)
- return 0;
- return (ia64_vector)irq;
-}
-
-unsigned int sn_local_vector_to_irq(u8 vector)
-{
- return (CPU_VECTOR_TO_IRQ(smp_processor_id(), vector));
-}
-
-void sn_irq_init(void)
-{
- int i;
-
- ia64_first_device_vector = IA64_SN2_FIRST_DEVICE_VECTOR;
- ia64_last_device_vector = IA64_SN2_LAST_DEVICE_VECTOR;
-
- for (i = 0; i < NR_IRQS; i++) {
- if (irq_get_chip(i) == &no_irq_chip)
- irq_set_chip(i, &irq_type_sn);
- }
-}
-
-static void register_intr_pda(struct sn_irq_info *sn_irq_info)
-{
- int irq = sn_irq_info->irq_irq;
- int cpu = sn_irq_info->irq_cpuid;
-
- if (pdacpu(cpu)->sn_last_irq < irq) {
- pdacpu(cpu)->sn_last_irq = irq;
- }
-
- if (pdacpu(cpu)->sn_first_irq == 0 || pdacpu(cpu)->sn_first_irq > irq)
- pdacpu(cpu)->sn_first_irq = irq;
-}
-
-static void unregister_intr_pda(struct sn_irq_info *sn_irq_info)
-{
- int irq = sn_irq_info->irq_irq;
- int cpu = sn_irq_info->irq_cpuid;
- struct sn_irq_info *tmp_irq_info;
- int i, foundmatch;
-
- rcu_read_lock();
- if (pdacpu(cpu)->sn_last_irq == irq) {
- foundmatch = 0;
- for (i = pdacpu(cpu)->sn_last_irq - 1;
- i && !foundmatch; i--) {
- list_for_each_entry_rcu(tmp_irq_info,
- sn_irq_lh[i],
- list) {
- if (tmp_irq_info->irq_cpuid == cpu) {
- foundmatch = 1;
- break;
- }
- }
- }
- pdacpu(cpu)->sn_last_irq = i;
- }
-
- if (pdacpu(cpu)->sn_first_irq == irq) {
- foundmatch = 0;
- for (i = pdacpu(cpu)->sn_first_irq + 1;
- i < NR_IRQS && !foundmatch; i++) {
- list_for_each_entry_rcu(tmp_irq_info,
- sn_irq_lh[i],
- list) {
- if (tmp_irq_info->irq_cpuid == cpu) {
- foundmatch = 1;
- break;
- }
- }
- }
- pdacpu(cpu)->sn_first_irq = ((i == NR_IRQS) ? 0 : i);
- }
- rcu_read_unlock();
-}
-
-void sn_irq_fixup(struct pci_dev *pci_dev, struct sn_irq_info *sn_irq_info)
-{
- nasid_t nasid = sn_irq_info->irq_nasid;
- int slice = sn_irq_info->irq_slice;
- int cpu = nasid_slice_to_cpuid(nasid, slice);
-#ifdef CONFIG_SMP
- int cpuphys;
-#endif
-
- pci_dev_get(pci_dev);
- sn_irq_info->irq_cpuid = cpu;
- sn_irq_info->irq_pciioinfo = SN_PCIDEV_INFO(pci_dev);
-
- /* link it into the sn_irq[irq] list */
- spin_lock(&sn_irq_info_lock);
- list_add_rcu(&sn_irq_info->list, sn_irq_lh[sn_irq_info->irq_irq]);
- reserve_irq_vector(sn_irq_info->irq_irq);
- if (sn_irq_info->irq_int_bit != -1)
- irq_set_handler(sn_irq_info->irq_irq, handle_level_irq);
- spin_unlock(&sn_irq_info_lock);
-
- register_intr_pda(sn_irq_info);
-#ifdef CONFIG_SMP
- cpuphys = cpu_physical_id(cpu);
- set_irq_affinity_info(sn_irq_info->irq_irq, cpuphys, 0);
- /*
- * Affinity was set by the PROM, prevent it from
- * being reset by the request_irq() path.
- */
- irqd_mark_affinity_was_set(irq_get_irq_data(sn_irq_info->irq_irq));
-#endif
-}
-
-void sn_irq_unfixup(struct pci_dev *pci_dev)
-{
- struct sn_irq_info *sn_irq_info;
-
- /* Only cleanup IRQ stuff if this device has a host bus context */
- if (!SN_PCIDEV_BUSSOFT(pci_dev))
- return;
-
- sn_irq_info = SN_PCIDEV_INFO(pci_dev)->pdi_sn_irq_info;
- if (!sn_irq_info)
- return;
- if (!sn_irq_info->irq_irq) {
- kfree(sn_irq_info);
- return;
- }
-
- unregister_intr_pda(sn_irq_info);
- spin_lock(&sn_irq_info_lock);
- list_del_rcu(&sn_irq_info->list);
- spin_unlock(&sn_irq_info_lock);
- if (list_empty(sn_irq_lh[sn_irq_info->irq_irq]))
- free_irq_vector(sn_irq_info->irq_irq);
- kfree_rcu(sn_irq_info, rcu);
- pci_dev_put(pci_dev);
-
-}
-
-static inline void
-sn_call_force_intr_provider(struct sn_irq_info *sn_irq_info)
-{
- struct sn_pcibus_provider *pci_provider;
-
- pci_provider = sn_pci_provider[sn_irq_info->irq_bridge_type];
-
- /* Don't force an interrupt if the irq has been disabled */
- if (!irqd_irq_disabled(irq_get_irq_data(sn_irq_info->irq_irq)) &&
- pci_provider && pci_provider->force_interrupt)
- (*pci_provider->force_interrupt)(sn_irq_info);
-}
-
-/*
- * Check for lost interrupts. If the PIC int_status reg. says that
- * an interrupt has been sent, but not handled, and the interrupt
- * is not pending in either the cpu irr regs or in the soft irr regs,
- * and the interrupt is not in service, then the interrupt may have
- * been lost. Force an interrupt on that pin. It is possible that
- * the interrupt is in flight, so we may generate a spurious interrupt,
- * but we should never miss a real lost interrupt.
- */
-static void sn_check_intr(int irq, struct sn_irq_info *sn_irq_info)
-{
- u64 regval;
- struct pcidev_info *pcidev_info;
- struct pcibus_info *pcibus_info;
-
- /*
- * Bridge types attached to TIO (anything but PIC) do not need this WAR
- * since they do not target Shub II interrupt registers. If that
- * ever changes, this check needs to accommodate.
- */
- if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_PIC)
- return;
-
- pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- if (!pcidev_info)
- return;
-
- pcibus_info =
- (struct pcibus_info *)pcidev_info->pdi_host_pcidev_info->
- pdi_pcibus_info;
- regval = pcireg_intr_status_get(pcibus_info);
-
- if (!ia64_get_irr(irq_to_vector(irq))) {
- if (!test_bit(irq, pda->sn_in_service_ivecs)) {
- regval &= 0xff;
- if (sn_irq_info->irq_int_bit & regval &
- sn_irq_info->irq_last_intr) {
- regval &= ~(sn_irq_info->irq_int_bit & regval);
- sn_call_force_intr_provider(sn_irq_info);
- }
- }
- }
- sn_irq_info->irq_last_intr = regval;
-}
-
-void sn_lb_int_war_check(void)
-{
- struct sn_irq_info *sn_irq_info;
- int i;
-
- if (!sn_ioif_inited || pda->sn_first_irq == 0)
- return;
-
- rcu_read_lock();
- for (i = pda->sn_first_irq; i <= pda->sn_last_irq; i++) {
- list_for_each_entry_rcu(sn_irq_info, sn_irq_lh[i], list) {
- sn_check_intr(i, sn_irq_info);
- }
- }
- rcu_read_unlock();
-}
-
-void __init sn_irq_lh_init(void)
-{
- int i;
-
- sn_irq_lh = kmalloc_array(NR_IRQS, sizeof(struct list_head *),
- GFP_KERNEL);
- if (!sn_irq_lh)
- panic("SN PCI INIT: Failed to allocate memory for PCI init\n");
-
- for (i = 0; i < NR_IRQS; i++) {
- sn_irq_lh[i] = kmalloc(sizeof(struct list_head), GFP_KERNEL);
- if (!sn_irq_lh[i])
- panic("SN PCI INIT: Failed IRQ memory allocation\n");
-
- INIT_LIST_HEAD(sn_irq_lh[i]);
- }
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1992 - 1997, 2000-2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/types.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <asm/sn/types.h>
-#include <asm/sn/module.h>
-#include <asm/sn/l1.h>
-
-char brick_types[MAX_BRICK_TYPES + 1] = "cri.xdpn%#=vo^kjbf890123456789...";
-/*
- * Format a module id for printing.
- *
- * There are three possible formats:
- *
- * MODULE_FORMAT_BRIEF is the brief 6-character format, including
- * the actual brick-type as recorded in the
- * moduleid_t, eg. 002c15 for a C-brick, or
- * 101#17 for a PX-brick.
- *
- * MODULE_FORMAT_LONG is the hwgraph format, eg. rack/002/bay/15
- * of rack/101/bay/17 (note that the brick
- * type does not appear in this format).
- *
- * MODULE_FORMAT_LCD is like MODULE_FORMAT_BRIEF, except that it
- * ensures that the module id provided appears
- * exactly as it would on the LCD display of
- * the corresponding brick, eg. still 002c15
- * for a C-brick, but 101p17 for a PX-brick.
- *
- * maule (9/13/04): Removed top-level check for (fmt == MODULE_FORMAT_LCD)
- * making MODULE_FORMAT_LCD equivalent to MODULE_FORMAT_BRIEF. It was
- * decided that all callers should assume the returned string should be what
- * is displayed on the brick L1 LCD.
- */
-void
-format_module_id(char *buffer, moduleid_t m, int fmt)
-{
- int rack, position;
- unsigned char brickchar;
-
- rack = MODULE_GET_RACK(m);
- brickchar = MODULE_GET_BTCHAR(m);
-
- /* Be sure we use the same brick type character as displayed
- * on the brick's LCD
- */
- switch (brickchar)
- {
- case L1_BRICKTYPE_GA:
- case L1_BRICKTYPE_OPUS_TIO:
- brickchar = L1_BRICKTYPE_C;
- break;
-
- case L1_BRICKTYPE_PX:
- case L1_BRICKTYPE_PE:
- case L1_BRICKTYPE_PA:
- case L1_BRICKTYPE_SA: /* we can move this to the "I's" later
- * if that makes more sense
- */
- brickchar = L1_BRICKTYPE_P;
- break;
-
- case L1_BRICKTYPE_IX:
- case L1_BRICKTYPE_IA:
-
- brickchar = L1_BRICKTYPE_I;
- break;
- }
-
- position = MODULE_GET_BPOS(m);
-
- if ((fmt == MODULE_FORMAT_BRIEF) || (fmt == MODULE_FORMAT_LCD)) {
- /* Brief module number format, eg. 002c15 */
-
- /* Decompress the rack number */
- *buffer++ = '0' + RACK_GET_CLASS(rack);
- *buffer++ = '0' + RACK_GET_GROUP(rack);
- *buffer++ = '0' + RACK_GET_NUM(rack);
-
- /* Add the brick type */
- *buffer++ = brickchar;
- }
- else if (fmt == MODULE_FORMAT_LONG) {
- /* Fuller hwgraph format, eg. rack/002/bay/15 */
-
- strcpy(buffer, "rack" "/"); buffer += strlen(buffer);
-
- *buffer++ = '0' + RACK_GET_CLASS(rack);
- *buffer++ = '0' + RACK_GET_GROUP(rack);
- *buffer++ = '0' + RACK_GET_NUM(rack);
-
- strcpy(buffer, "/" "bay" "/"); buffer += strlen(buffer);
- }
-
- /* Add the bay position, using at least two digits */
- if (position < 10)
- *buffer++ = '0';
- sprintf(buffer, "%d", position);
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2002-2003 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#define MACHVEC_PLATFORM_NAME sn2
-#define MACHVEC_PLATFORM_HEADER <asm/machvec_sn2.h>
-#include <asm/machvec_init.h>
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (c) 2000-2006 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/vmalloc.h>
-#include <linux/mutex.h>
-#include <asm/mca.h>
-#include <asm/sal.h>
-#include <asm/sn/sn_sal.h>
-
-/*
- * Interval for calling SAL to poll for errors that do NOT cause error
- * interrupts. SAL will raise a CPEI if any errors are present that
- * need to be logged.
- */
-#define CPEI_INTERVAL (5*HZ)
-
-struct timer_list sn_cpei_timer;
-void sn_init_cpei_timer(void);
-
-/* Printing oemdata from mca uses data that is not passed through SAL, it is
- * global. Only one user at a time.
- */
-static DEFINE_MUTEX(sn_oemdata_mutex);
-static u8 **sn_oemdata;
-static u64 *sn_oemdata_size, sn_oemdata_bufsize;
-
-/*
- * print_hook
- *
- * This function is the callback routine that SAL calls to log error
- * info for platform errors. buf is appended to sn_oemdata, resizing as
- * required.
- * Note: this is a SAL to OS callback, running under the same rules as the SAL
- * code. SAL calls are run with preempt disabled so this routine must not
- * sleep. vmalloc can sleep so print_hook cannot resize the output buffer
- * itself, instead it must set the required size and return to let the caller
- * resize the buffer then redrive the SAL call.
- */
-static int print_hook(const char *fmt, ...)
-{
- char buf[400];
- int len;
- va_list args;
- va_start(args, fmt);
- vsnprintf(buf, sizeof(buf), fmt, args);
- va_end(args);
- len = strlen(buf);
- if (*sn_oemdata_size + len <= sn_oemdata_bufsize)
- memcpy(*sn_oemdata + *sn_oemdata_size, buf, len);
- *sn_oemdata_size += len;
- return 0;
-}
-
-static void sn_cpei_handler(int irq, void *devid, struct pt_regs *regs)
-{
- /*
- * this function's sole purpose is to call SAL when we receive
- * a CE interrupt from SHUB or when the timer routine decides
- * we need to call SAL to check for CEs.
- */
-
- /* CALL SAL_LOG_CE */
-
- ia64_sn_plat_cpei_handler();
-}
-
-static void sn_cpei_timer_handler(struct timer_list *unused)
-{
- sn_cpei_handler(-1, NULL, NULL);
- mod_timer(&sn_cpei_timer, jiffies + CPEI_INTERVAL);
-}
-
-void sn_init_cpei_timer(void)
-{
- timer_setup(&sn_cpei_timer, sn_cpei_timer_handler, 0);
- sn_cpei_timer.expires = jiffies + CPEI_INTERVAL;
- add_timer(&sn_cpei_timer);
-}
-
-static int
-sn_platform_plat_specific_err_print(const u8 * sect_header, u8 ** oemdata,
- u64 * oemdata_size)
-{
- mutex_lock(&sn_oemdata_mutex);
- sn_oemdata = oemdata;
- sn_oemdata_size = oemdata_size;
- sn_oemdata_bufsize = 0;
- *sn_oemdata_size = PAGE_SIZE; /* first guess at how much data will be generated */
- while (*sn_oemdata_size > sn_oemdata_bufsize) {
- u8 *newbuf = vmalloc(*sn_oemdata_size);
- if (!newbuf) {
- mutex_unlock(&sn_oemdata_mutex);
- printk(KERN_ERR "%s: unable to extend sn_oemdata\n",
- __func__);
- return 1;
- }
- vfree(*sn_oemdata);
- *sn_oemdata = newbuf;
- sn_oemdata_bufsize = *sn_oemdata_size;
- *sn_oemdata_size = 0;
- ia64_sn_plat_specific_err_print(print_hook, (char *)sect_header);
- }
- mutex_unlock(&sn_oemdata_mutex);
- return 0;
-}
-
-/* Callback when userspace salinfo wants to decode oem data via the platform
- * kernel and/or prom.
- */
-int sn_salinfo_platform_oemdata(const u8 *sect_header, u8 **oemdata, u64 *oemdata_size)
-{
- efi_guid_t guid = *(efi_guid_t *)sect_header;
- int valid = 0;
- *oemdata_size = 0;
- vfree(*oemdata);
- *oemdata = NULL;
- if (efi_guidcmp(guid, SAL_PLAT_SPECIFIC_ERR_SECT_GUID) == 0) {
- sal_log_plat_specific_err_info_t *psei = (sal_log_plat_specific_err_info_t *)sect_header;
- valid = psei->valid.oem_data;
- } else if (efi_guidcmp(guid, SAL_PLAT_MEM_DEV_ERR_SECT_GUID) == 0) {
- sal_log_mem_dev_err_info_t *mdei = (sal_log_mem_dev_err_info_t *)sect_header;
- valid = mdei->valid.oem_data;
- }
- if (valid)
- return sn_platform_plat_specific_err_print(sect_header, oemdata, oemdata_size);
- else
- return 0;
-}
-
-static int __init sn_salinfo_init(void)
-{
- if (ia64_platform_is("sn2"))
- salinfo_platform_oemdata = &sn_salinfo_platform_oemdata;
- return 0;
-}
-device_initcall(sn_salinfo_init);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2006 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/pci.h>
-#include <linux/cpumask.h>
-#include <linux/msi.h>
-#include <linux/slab.h>
-
-#include <asm/sn/addrs.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/nodepda.h>
-
-struct sn_msi_info {
- u64 pci_addr;
- struct sn_irq_info *sn_irq_info;
-};
-
-static struct sn_msi_info sn_msi_info[NR_IRQS];
-
-static struct irq_chip sn_msi_chip;
-
-void sn_teardown_msi_irq(unsigned int irq)
-{
- nasid_t nasid;
- int widget;
- struct pci_dev *pdev;
- struct pcidev_info *sn_pdev;
- struct sn_irq_info *sn_irq_info;
- struct pcibus_bussoft *bussoft;
- struct sn_pcibus_provider *provider;
-
- sn_irq_info = sn_msi_info[irq].sn_irq_info;
- if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
- return;
-
- sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- pdev = sn_pdev->pdi_linux_pcidev;
- provider = SN_PCIDEV_BUSPROVIDER(pdev);
-
- (*provider->dma_unmap)(pdev,
- sn_msi_info[irq].pci_addr,
- PCI_DMA_FROMDEVICE);
- sn_msi_info[irq].pci_addr = 0;
-
- bussoft = SN_PCIDEV_BUSSOFT(pdev);
- nasid = NASID_GET(bussoft->bs_base);
- widget = (nasid & 1) ?
- TIO_SWIN_WIDGETNUM(bussoft->bs_base) :
- SWIN_WIDGETNUM(bussoft->bs_base);
-
- sn_intr_free(nasid, widget, sn_irq_info);
- sn_msi_info[irq].sn_irq_info = NULL;
-
- destroy_irq(irq);
-}
-
-int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
-{
- struct msi_msg msg;
- int widget;
- int status;
- nasid_t nasid;
- u64 bus_addr;
- struct sn_irq_info *sn_irq_info;
- struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
- int irq;
-
- if (!entry->msi_attrib.is_64)
- return -EINVAL;
-
- if (bussoft == NULL)
- return -EINVAL;
-
- if (provider == NULL || provider->dma_map_consistent == NULL)
- return -EINVAL;
-
- irq = create_irq();
- if (irq < 0)
- return irq;
-
- /*
- * Set up the vector plumbing. Let the prom (via sn_intr_alloc)
- * decide which cpu to direct this msi at by default.
- */
-
- nasid = NASID_GET(bussoft->bs_base);
- widget = (nasid & 1) ?
- TIO_SWIN_WIDGETNUM(bussoft->bs_base) :
- SWIN_WIDGETNUM(bussoft->bs_base);
-
- sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
- if (! sn_irq_info) {
- destroy_irq(irq);
- return -ENOMEM;
- }
-
- status = sn_intr_alloc(nasid, widget, sn_irq_info, irq, -1, -1);
- if (status) {
- kfree(sn_irq_info);
- destroy_irq(irq);
- return -ENOMEM;
- }
-
- sn_irq_info->irq_int_bit = -1; /* mark this as an MSI irq */
- sn_irq_fixup(pdev, sn_irq_info);
-
- /* Prom probably should fill these in, but doesn't ... */
- sn_irq_info->irq_bridge_type = bussoft->bs_asic_type;
- sn_irq_info->irq_bridge = (void *)bussoft->bs_base;
-
- /*
- * Map the xio address into bus space
- */
- bus_addr = (*provider->dma_map_consistent)(pdev,
- sn_irq_info->irq_xtalkaddr,
- sizeof(sn_irq_info->irq_xtalkaddr),
- SN_DMA_MSI|SN_DMA_ADDR_XIO);
- if (! bus_addr) {
- sn_intr_free(nasid, widget, sn_irq_info);
- kfree(sn_irq_info);
- destroy_irq(irq);
- return -ENOMEM;
- }
-
- sn_msi_info[irq].sn_irq_info = sn_irq_info;
- sn_msi_info[irq].pci_addr = bus_addr;
-
- msg.address_hi = (u32)(bus_addr >> 32);
- msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
-
- /*
- * In the SN platform, bit 16 is a "send vector" bit which
- * must be present in order to move the vector through the system.
- */
- msg.data = 0x100 + irq;
-
- irq_set_msi_desc(irq, entry);
- pci_write_msi_msg(irq, &msg);
- irq_set_chip_and_handler(irq, &sn_msi_chip, handle_edge_irq);
-
- return 0;
-}
-
-#ifdef CONFIG_SMP
-static int sn_set_msi_irq_affinity(struct irq_data *data,
- const struct cpumask *cpu_mask, bool force)
-{
- struct msi_msg msg;
- int slice;
- nasid_t nasid;
- u64 bus_addr;
- struct pci_dev *pdev;
- struct pcidev_info *sn_pdev;
- struct sn_irq_info *sn_irq_info;
- struct sn_irq_info *new_irq_info;
- struct sn_pcibus_provider *provider;
- unsigned int cpu, irq = data->irq;
-
- cpu = cpumask_first_and(cpu_mask, cpu_online_mask);
- sn_irq_info = sn_msi_info[irq].sn_irq_info;
- if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
- return -1;
-
- /*
- * Release XIO resources for the old MSI PCI address
- */
-
- __get_cached_msi_msg(irq_data_get_msi_desc(data), &msg);
- sn_pdev = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- pdev = sn_pdev->pdi_linux_pcidev;
- provider = SN_PCIDEV_BUSPROVIDER(pdev);
-
- bus_addr = (u64)(msg.address_hi) << 32 | (u64)(msg.address_lo);
- (*provider->dma_unmap)(pdev, bus_addr, PCI_DMA_FROMDEVICE);
- sn_msi_info[irq].pci_addr = 0;
-
- nasid = cpuid_to_nasid(cpu);
- slice = cpuid_to_slice(cpu);
-
- new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
- sn_msi_info[irq].sn_irq_info = new_irq_info;
- if (new_irq_info == NULL)
- return -1;
-
- /*
- * Map the xio address into bus space
- */
-
- bus_addr = (*provider->dma_map_consistent)(pdev,
- new_irq_info->irq_xtalkaddr,
- sizeof(new_irq_info->irq_xtalkaddr),
- SN_DMA_MSI|SN_DMA_ADDR_XIO);
-
- sn_msi_info[irq].pci_addr = bus_addr;
- msg.address_hi = (u32)(bus_addr >> 32);
- msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff);
-
- pci_write_msi_msg(irq, &msg);
- cpumask_copy(irq_data_get_affinity_mask(data), cpu_mask);
-
- return 0;
-}
-#endif /* CONFIG_SMP */
-
-static void sn_ack_msi_irq(struct irq_data *data)
-{
- irq_move_irq(data);
- ia64_eoi();
-}
-
-static int sn_msi_retrigger_irq(struct irq_data *data)
-{
- unsigned int vector = data->irq;
- ia64_resend_irq(vector);
-
- return 1;
-}
-
-static struct irq_chip sn_msi_chip = {
- .name = "PCI-MSI",
- .irq_mask = pci_msi_mask_irq,
- .irq_unmask = pci_msi_unmask_irq,
- .irq_ack = sn_ack_msi_irq,
-#ifdef CONFIG_SMP
- .irq_set_affinity = sn_set_msi_irq_affinity,
-#endif
- .irq_retrigger = sn_msi_retrigger_irq,
-};
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- *
- * This file contains macros used to access MMR registers via
- * uncached physical addresses.
- * pio_phys_read_mmr - read an MMR
- * pio_phys_write_mmr - write an MMR
- * pio_atomic_phys_write_mmrs - atomically write 1 or 2 MMRs with psr.ic=0
- * Second MMR will be skipped if address is NULL
- *
- * Addresses passed to these routines should be uncached physical addresses
- * ie., 0x80000....
- */
-
-
-
-#include <asm/asmmacro.h>
-#include <asm/page.h>
-
-GLOBAL_ENTRY(pio_phys_read_mmr)
- .prologue
- .regstk 1,0,0,0
- .body
- mov r2=psr
- rsm psr.i | psr.dt
- ;;
- srlz.d
- ld8.acq r8=[r32]
- ;;
- mov psr.l=r2;;
- srlz.d
- br.ret.sptk.many rp
-END(pio_phys_read_mmr)
-
-GLOBAL_ENTRY(pio_phys_write_mmr)
- .prologue
- .regstk 2,0,0,0
- .body
- mov r2=psr
- rsm psr.i | psr.dt
- ;;
- srlz.d
- st8.rel [r32]=r33
- ;;
- mov psr.l=r2;;
- srlz.d
- br.ret.sptk.many rp
-END(pio_phys_write_mmr)
-
-GLOBAL_ENTRY(pio_atomic_phys_write_mmrs)
- .prologue
- .regstk 4,0,0,0
- .body
- mov r2=psr
- cmp.ne p9,p0=r34,r0;
- rsm psr.i | psr.dt | psr.ic
- ;;
- srlz.d
- st8.rel [r32]=r33
-(p9) st8.rel [r34]=r35
- ;;
- mov psr.l=r2;;
- srlz.d
- br.ret.sptk.many rp
-END(pio_atomic_phys_write_mmrs)
-
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999,2001-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/kdev_t.h>
-#include <linux/string.h>
-#include <linux/screen_info.h>
-#include <linux/console.h>
-#include <linux/timex.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/mm.h>
-#include <linux/serial.h>
-#include <linux/irq.h>
-#include <linux/memblock.h>
-#include <linux/mmzone.h>
-#include <linux/interrupt.h>
-#include <linux/acpi.h>
-#include <linux/compiler.h>
-#include <linux/root_dev.h>
-#include <linux/nodemask.h>
-#include <linux/pm.h>
-#include <linux/efi.h>
-
-#include <asm/io.h>
-#include <asm/sal.h>
-#include <asm/machvec.h>
-#include <asm/processor.h>
-#include <asm/vga.h>
-#include <asm/setup.h>
-#include <asm/sn/arch.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/simulator.h>
-#include <asm/sn/leds.h>
-#include <asm/sn/bte.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/clksupport.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/sn_feature_sets.h>
-#include "xtalk/xwidgetdev.h"
-#include "xtalk/hubdev.h"
-#include <asm/sn/klconfig.h>
-
-
-DEFINE_PER_CPU(struct pda_s, pda_percpu);
-
-#define MAX_PHYS_MEMORY (1UL << IA64_MAX_PHYS_BITS) /* Max physical address supported */
-
-extern void bte_init_node(nodepda_t *, cnodeid_t);
-
-extern void sn_timer_init(void);
-extern unsigned long last_time_offset;
-extern void (*ia64_mark_idle) (int);
-extern void snidle(int);
-
-unsigned long sn_rtc_cycles_per_second;
-EXPORT_SYMBOL(sn_rtc_cycles_per_second);
-
-DEFINE_PER_CPU(struct sn_hub_info_s, __sn_hub_info);
-EXPORT_PER_CPU_SYMBOL(__sn_hub_info);
-
-DEFINE_PER_CPU(short, __sn_cnodeid_to_nasid[MAX_COMPACT_NODES]);
-EXPORT_PER_CPU_SYMBOL(__sn_cnodeid_to_nasid);
-
-DEFINE_PER_CPU(struct nodepda_s *, __sn_nodepda);
-EXPORT_PER_CPU_SYMBOL(__sn_nodepda);
-
-char sn_system_serial_number_string[128];
-EXPORT_SYMBOL(sn_system_serial_number_string);
-u64 sn_partition_serial_number;
-EXPORT_SYMBOL(sn_partition_serial_number);
-u8 sn_partition_id;
-EXPORT_SYMBOL(sn_partition_id);
-u8 sn_system_size;
-EXPORT_SYMBOL(sn_system_size);
-u8 sn_sharing_domain_size;
-EXPORT_SYMBOL(sn_sharing_domain_size);
-u8 sn_coherency_id;
-EXPORT_SYMBOL(sn_coherency_id);
-u8 sn_region_size;
-EXPORT_SYMBOL(sn_region_size);
-int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */
-
-short physical_node_map[MAX_NUMALINK_NODES];
-static unsigned long sn_prom_features[MAX_PROM_FEATURE_SETS];
-
-EXPORT_SYMBOL(physical_node_map);
-
-int num_cnodes;
-
-static void sn_init_pdas(char **);
-static void build_cnode_tables(void);
-
-static nodepda_t *nodepdaindr[MAX_COMPACT_NODES];
-
-/*
- * The format of "screen_info" is strange, and due to early i386-setup
- * code. This is just enough to make the console code think we're on a
- * VGA color display.
- */
-struct screen_info sn_screen_info = {
- .orig_x = 0,
- .orig_y = 0,
- .orig_video_mode = 3,
- .orig_video_cols = 80,
- .orig_video_ega_bx = 3,
- .orig_video_lines = 25,
- .orig_video_isVGA = 1,
- .orig_video_points = 16
-};
-
-/*
- * This routine can only be used during init, since
- * smp_boot_data is an init data structure.
- * We have to use smp_boot_data.cpu_phys_id to find
- * the physical id of the processor because the normal
- * cpu_physical_id() relies on data structures that
- * may not be initialized yet.
- */
-
-static int __init pxm_to_nasid(int pxm)
-{
- int i;
- int nid;
-
- nid = pxm_to_node(pxm);
- for (i = 0; i < num_node_memblks; i++) {
- if (node_memblk[i].nid == nid) {
- return NASID_GET(node_memblk[i].start_paddr);
- }
- }
- return -1;
-}
-
-/**
- * early_sn_setup - early setup routine for SN platforms
- *
- * Sets up an initial console to aid debugging. Intended primarily
- * for bringup. See start_kernel() in init/main.c.
- */
-
-void __init early_sn_setup(void)
-{
- efi_system_table_t *efi_systab;
- efi_config_table_t *config_tables;
- struct ia64_sal_systab *sal_systab;
- struct ia64_sal_desc_entry_point *ep;
- char *p;
- int i, j;
-
- /*
- * Parse enough of the SAL tables to locate the SAL entry point. Since, console
- * IO on SN2 is done via SAL calls, early_printk won't work without this.
- *
- * This code duplicates some of the ACPI table parsing that is in efi.c & sal.c.
- * Any changes to those file may have to be made here as well.
- */
- efi_systab = (efi_system_table_t *) __va(ia64_boot_param->efi_systab);
- config_tables = __va(efi_systab->tables);
- for (i = 0; i < efi_systab->nr_tables; i++) {
- if (efi_guidcmp(config_tables[i].guid, SAL_SYSTEM_TABLE_GUID) ==
- 0) {
- sal_systab = __va(config_tables[i].table);
- p = (char *)(sal_systab + 1);
- for (j = 0; j < sal_systab->entry_count; j++) {
- if (*p == SAL_DESC_ENTRY_POINT) {
- ep = (struct ia64_sal_desc_entry_point
- *)p;
- ia64_sal_handler_init(__va
- (ep->sal_proc),
- __va(ep->gp));
- return;
- }
- p += SAL_DESC_SIZE(*p);
- }
- }
- }
- /* Uh-oh, SAL not available?? */
- printk(KERN_ERR "failed to find SAL entry point\n");
-}
-
-extern int platform_intr_list[];
-static int shub_1_1_found;
-
-/*
- * sn_check_for_wars
- *
- * Set flag for enabling shub specific wars
- */
-
-static inline int is_shub_1_1(int nasid)
-{
- unsigned long id;
- int rev;
-
- if (is_shub2())
- return 0;
- id = REMOTE_HUB_L(nasid, SH1_SHUB_ID);
- rev = (id & SH1_SHUB_ID_REVISION_MASK) >> SH1_SHUB_ID_REVISION_SHFT;
- return rev <= 2;
-}
-
-static void sn_check_for_wars(void)
-{
- int cnode;
-
- if (is_shub2()) {
- /* none yet */
- } else {
- for_each_online_node(cnode) {
- if (is_shub_1_1(cnodeid_to_nasid(cnode)))
- shub_1_1_found = 1;
- }
- }
-}
-
-/*
- * Scan the EFI PCDP table (if it exists) for an acceptable VGA console
- * output device. If one exists, pick it and set sn_legacy_{io,mem} to
- * reflect the bus offsets needed to address it.
- *
- * Since pcdp support in SN is not supported in the 2.4 kernel (or at least
- * the one lbs is based on) just declare the needed structs here.
- *
- * Reference spec http://www.dig64.org/specifications/DIG64_PCDPv20.pdf
- *
- * Returns 0 if no acceptable vga is found, !0 otherwise.
- *
- * Note: This stuff is duped here because Altix requires the PCDP to
- * locate a usable VGA device due to lack of proper ACPI support. Structures
- * could be used from drivers/firmware/pcdp.h, but it was decided that moving
- * this file to a more public location just for Altix use was undesirable.
- */
-
-struct hcdp_uart_desc {
- u8 pad[45];
-};
-
-struct pcdp {
- u8 signature[4]; /* should be 'HCDP' */
- u32 length;
- u8 rev; /* should be >=3 for pcdp, <3 for hcdp */
- u8 sum;
- u8 oem_id[6];
- u64 oem_tableid;
- u32 oem_rev;
- u32 creator_id;
- u32 creator_rev;
- u32 num_type0;
- struct hcdp_uart_desc uart[0]; /* num_type0 of these */
- /* pcdp descriptors follow */
-} __attribute__((packed));
-
-struct pcdp_device_desc {
- u8 type;
- u8 primary;
- u16 length;
- u16 index;
- /* interconnect specific structure follows */
- /* device specific structure follows that */
-} __attribute__((packed));
-
-struct pcdp_interface_pci {
- u8 type; /* 1 == pci */
- u8 reserved;
- u16 length;
- u8 segment;
- u8 bus;
- u8 dev;
- u8 fun;
- u16 devid;
- u16 vendid;
- u32 acpi_interrupt;
- u64 mmio_tra;
- u64 ioport_tra;
- u8 flags;
- u8 translation;
-} __attribute__((packed));
-
-struct pcdp_vga_device {
- u8 num_eas_desc;
- /* ACPI Extended Address Space Desc follows */
-} __attribute__((packed));
-
-/* from pcdp_device_desc.primary */
-#define PCDP_PRIMARY_CONSOLE 0x01
-
-/* from pcdp_device_desc.type */
-#define PCDP_CONSOLE_INOUT 0x0
-#define PCDP_CONSOLE_DEBUG 0x1
-#define PCDP_CONSOLE_OUT 0x2
-#define PCDP_CONSOLE_IN 0x3
-#define PCDP_CONSOLE_TYPE_VGA 0x8
-
-#define PCDP_CONSOLE_VGA (PCDP_CONSOLE_TYPE_VGA | PCDP_CONSOLE_OUT)
-
-/* from pcdp_interface_pci.type */
-#define PCDP_IF_PCI 1
-
-/* from pcdp_interface_pci.translation */
-#define PCDP_PCI_TRANS_IOPORT 0x02
-#define PCDP_PCI_TRANS_MMIO 0x01
-
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
-static void
-sn_scan_pcdp(void)
-{
- u8 *bp;
- struct pcdp *pcdp;
- struct pcdp_device_desc device;
- struct pcdp_interface_pci if_pci;
- extern struct efi efi;
-
- if (efi.hcdp == EFI_INVALID_TABLE_ADDR)
- return; /* no hcdp/pcdp table */
-
- pcdp = __va(efi.hcdp);
-
- if (pcdp->rev < 3)
- return; /* only support PCDP (rev >= 3) */
-
- for (bp = (u8 *)&pcdp->uart[pcdp->num_type0];
- bp < (u8 *)pcdp + pcdp->length;
- bp += device.length) {
- memcpy(&device, bp, sizeof(device));
- if (! (device.primary & PCDP_PRIMARY_CONSOLE))
- continue; /* not primary console */
-
- if (device.type != PCDP_CONSOLE_VGA)
- continue; /* not VGA descriptor */
-
- memcpy(&if_pci, bp+sizeof(device), sizeof(if_pci));
- if (if_pci.type != PCDP_IF_PCI)
- continue; /* not PCI interconnect */
-
- if (if_pci.translation & PCDP_PCI_TRANS_IOPORT)
- vga_console_iobase = if_pci.ioport_tra;
-
- if (if_pci.translation & PCDP_PCI_TRANS_MMIO)
- vga_console_membase =
- if_pci.mmio_tra | __IA64_UNCACHED_OFFSET;
-
- break; /* once we find the primary, we're done */
- }
-}
-#endif
-
-static unsigned long sn2_rtc_initial;
-
-/**
- * sn_setup - SN platform setup routine
- * @cmdline_p: kernel command line
- *
- * Handles platform setup for SN machines. This includes determining
- * the RTC frequency (via a SAL call), initializing secondary CPUs, and
- * setting up per-node data areas. The console is also initialized here.
- */
-void __init sn_setup(char **cmdline_p)
-{
- long status, ticks_per_sec, drift;
- u32 version = sn_sal_rev();
- extern void sn_cpu_init(void);
-
- sn2_rtc_initial = rtc_time();
- ia64_sn_plat_set_error_handling_features(); // obsolete
- ia64_sn_set_os_feature(OSF_MCA_SLV_TO_OS_INIT_SLV);
- ia64_sn_set_os_feature(OSF_FEAT_LOG_SBES);
- /*
- * Note: The calls to notify the PROM of ACPI and PCI Segment
- * support must be done prior to acpi_load_tables(), as
- * an ACPI capable PROM will rebuild the DSDT as result
- * of the call.
- */
- ia64_sn_set_os_feature(OSF_PCISEGMENT_ENABLE);
- ia64_sn_set_os_feature(OSF_ACPI_ENABLE);
-
- /* Load the new DSDT and SSDT tables into the global table list. */
- acpi_table_init();
-
-#if defined(CONFIG_VT) && defined(CONFIG_VGA_CONSOLE)
- /*
- * Handle SN vga console.
- *
- * SN systems do not have enough ACPI table information
- * being passed from prom to identify VGA adapters and the legacy
- * addresses to access them. Until that is done, SN systems rely
- * on the PCDP table to identify the primary VGA console if one
- * exists.
- *
- * However, kernel PCDP support is optional, and even if it is built
- * into the kernel, it will not be used if the boot cmdline contains
- * console= directives.
- *
- * So, to work around this mess, we duplicate some of the PCDP code
- * here so that the primary VGA console (as defined by PCDP) will
- * work on SN systems even if a different console (e.g. serial) is
- * selected on the boot line (or CONFIG_EFI_PCDP is off).
- */
-
- if (! vga_console_membase)
- sn_scan_pcdp();
-
- /*
- * Setup legacy IO space.
- * vga_console_iobase maps to PCI IO Space address 0 on the
- * bus containing the VGA console.
- */
- if (vga_console_iobase) {
- io_space[0].mmio_base =
- (unsigned long) ioremap(vga_console_iobase, 0);
- io_space[0].sparse = 0;
- }
-
- if (vga_console_membase) {
- /* usable vga ... make tty0 the preferred default console */
- if (!strstr(*cmdline_p, "console="))
- add_preferred_console("tty", 0, NULL);
- } else {
- printk(KERN_DEBUG "SGI: Disabling VGA console\n");
- if (!strstr(*cmdline_p, "console="))
- add_preferred_console("ttySG", 0, NULL);
-#ifdef CONFIG_DUMMY_CONSOLE
- conswitchp = &dummy_con;
-#else
- conswitchp = NULL;
-#endif /* CONFIG_DUMMY_CONSOLE */
- }
-#endif /* def(CONFIG_VT) && def(CONFIG_VGA_CONSOLE) */
-
- MAX_DMA_ADDRESS = PAGE_OFFSET + MAX_PHYS_MEMORY;
-
- /*
- * Build the tables for managing cnodes.
- */
- build_cnode_tables();
-
- status =
- ia64_sal_freq_base(SAL_FREQ_BASE_REALTIME_CLOCK, &ticks_per_sec,
- &drift);
- if (status != 0 || ticks_per_sec < 100000) {
- printk(KERN_WARNING
- "unable to determine platform RTC clock frequency, guessing.\n");
- /* PROM gives wrong value for clock freq. so guess */
- sn_rtc_cycles_per_second = 1000000000000UL / 30000UL;
- } else
- sn_rtc_cycles_per_second = ticks_per_sec;
-
- platform_intr_list[ACPI_INTERRUPT_CPEI] = IA64_CPE_VECTOR;
-
- printk("SGI SAL version %x.%02x\n", version >> 8, version & 0x00FF);
-
- /*
- * we set the default root device to /dev/hda
- * to make simulation easy
- */
- ROOT_DEV = Root_HDA1;
-
- /*
- * Create the PDAs and NODEPDAs for all the cpus.
- */
- sn_init_pdas(cmdline_p);
-
- ia64_mark_idle = &snidle;
-
- /*
- * For the bootcpu, we do this here. All other cpus will make the
- * call as part of cpu_init in slave cpu initialization.
- */
- sn_cpu_init();
-
-#ifdef CONFIG_SMP
- init_smp_config();
-#endif
- screen_info = sn_screen_info;
-
- sn_timer_init();
-
- /*
- * set pm_power_off to a SAL call to allow
- * sn machines to power off. The SAL call can be replaced
- * by an ACPI interface call when ACPI is fully implemented
- * for sn.
- */
- pm_power_off = ia64_sn_power_down;
- current->thread.flags |= IA64_THREAD_MIGRATION;
-}
-
-/**
- * sn_init_pdas - setup node data areas
- *
- * One time setup for Node Data Area. Called by sn_setup().
- */
-static void __init sn_init_pdas(char **cmdline_p)
-{
- cnodeid_t cnode;
-
- /*
- * Allocate & initialize the nodepda for each node.
- */
- for_each_online_node(cnode) {
- nodepdaindr[cnode] =
- memblock_alloc_node(sizeof(nodepda_t), SMP_CACHE_BYTES,
- cnode);
- if (!nodepdaindr[cnode])
- panic("%s: Failed to allocate %lu bytes align=0x%x nid=%d\n",
- __func__, sizeof(nodepda_t), SMP_CACHE_BYTES,
- cnode);
- memset(nodepdaindr[cnode]->phys_cpuid, -1,
- sizeof(nodepdaindr[cnode]->phys_cpuid));
- spin_lock_init(&nodepdaindr[cnode]->ptc_lock);
- }
-
- /*
- * Allocate & initialize nodepda for TIOs. For now, put them on node 0.
- */
- for (cnode = num_online_nodes(); cnode < num_cnodes; cnode++) {
- nodepdaindr[cnode] =
- memblock_alloc_node(sizeof(nodepda_t), SMP_CACHE_BYTES, 0);
- if (!nodepdaindr[cnode])
- panic("%s: Failed to allocate %lu bytes align=0x%x nid=%d\n",
- __func__, sizeof(nodepda_t), SMP_CACHE_BYTES,
- cnode);
- }
-
-
- /*
- * Now copy the array of nodepda pointers to each nodepda.
- */
- for (cnode = 0; cnode < num_cnodes; cnode++)
- memcpy(nodepdaindr[cnode]->pernode_pdaindr, nodepdaindr,
- sizeof(nodepdaindr));
-
- /*
- * Set up IO related platform-dependent nodepda fields.
- * The following routine actually sets up the hubinfo struct
- * in nodepda.
- */
- for_each_online_node(cnode) {
- bte_init_node(nodepdaindr[cnode], cnode);
- }
-
- /*
- * Initialize the per node hubdev. This includes IO Nodes and
- * headless/memless nodes.
- */
- for (cnode = 0; cnode < num_cnodes; cnode++) {
- hubdev_init_node(nodepdaindr[cnode], cnode);
- }
-}
-
-/**
- * sn_cpu_init - initialize per-cpu data areas
- * @cpuid: cpuid of the caller
- *
- * Called during cpu initialization on each cpu as it starts.
- * Currently, initializes the per-cpu data area for SNIA.
- * Also sets up a few fields in the nodepda. Also known as
- * platform_cpu_init() by the ia64 machvec code.
- */
-void sn_cpu_init(void)
-{
- int cpuid;
- int cpuphyid;
- int nasid;
- int subnode;
- int slice;
- int cnode;
- int i;
- static int wars_have_been_checked, set_cpu0_number;
-
- cpuid = smp_processor_id();
- if (cpuid == 0 && IS_MEDUSA()) {
- if (ia64_sn_is_fake_prom())
- sn_prom_type = 2;
- else
- sn_prom_type = 1;
- printk(KERN_INFO "Running on medusa with %s PROM\n",
- (sn_prom_type == 1) ? "real" : "fake");
- }
-
- memset(pda, 0, sizeof(*pda));
- if (ia64_sn_get_sn_info(0, &sn_hub_info->shub2,
- &sn_hub_info->nasid_bitmask,
- &sn_hub_info->nasid_shift,
- &sn_system_size, &sn_sharing_domain_size,
- &sn_partition_id, &sn_coherency_id,
- &sn_region_size))
- BUG();
- sn_hub_info->as_shift = sn_hub_info->nasid_shift - 2;
-
- /*
- * Don't check status. The SAL call is not supported on all PROMs
- * but a failure is harmless.
- * Architecturally, cpu_init is always called twice on cpu 0. We
- * should set cpu_number on cpu 0 once.
- */
- if (cpuid == 0) {
- if (!set_cpu0_number) {
- (void) ia64_sn_set_cpu_number(cpuid);
- set_cpu0_number = 1;
- }
- } else
- (void) ia64_sn_set_cpu_number(cpuid);
-
- /*
- * The boot cpu makes this call again after platform initialization is
- * complete.
- */
- if (nodepdaindr[0] == NULL)
- return;
-
- for (i = 0; i < MAX_PROM_FEATURE_SETS; i++)
- if (ia64_sn_get_prom_feature_set(i, &sn_prom_features[i]) != 0)
- break;
-
- cpuphyid = get_sapicid();
-
- if (ia64_sn_get_sapic_info(cpuphyid, &nasid, &subnode, &slice))
- BUG();
-
- for (i=0; i < MAX_NUMNODES; i++) {
- if (nodepdaindr[i]) {
- nodepdaindr[i]->phys_cpuid[cpuid].nasid = nasid;
- nodepdaindr[i]->phys_cpuid[cpuid].slice = slice;
- nodepdaindr[i]->phys_cpuid[cpuid].subnode = subnode;
- }
- }
-
- cnode = nasid_to_cnodeid(nasid);
-
- __this_cpu_write(__sn_nodepda, nodepdaindr[cnode]);
-
- pda->led_address =
- (typeof(pda->led_address)) (LED0 + (slice << LED_CPU_SHIFT));
- pda->led_state = LED_ALWAYS_SET;
- pda->hb_count = HZ / 2;
- pda->hb_state = 0;
- pda->idle_flag = 0;
-
- if (cpuid != 0) {
- /* copy cpu 0's sn_cnodeid_to_nasid table to this cpu's */
- memcpy(sn_cnodeid_to_nasid,
- (&per_cpu(__sn_cnodeid_to_nasid, 0)),
- sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
- }
-
- /*
- * Check for WARs.
- * Only needs to be done once, on BSP.
- * Has to be done after loop above, because it uses this cpu's
- * sn_cnodeid_to_nasid table which was just initialized if this
- * isn't cpu 0.
- * Has to be done before assignment below.
- */
- if (!wars_have_been_checked) {
- sn_check_for_wars();
- wars_have_been_checked = 1;
- }
- sn_hub_info->shub_1_1_found = shub_1_1_found;
-
- /*
- * Set up addresses of PIO/MEM write status registers.
- */
- {
- u64 pio1[] = {SH1_PIO_WRITE_STATUS_0, 0, SH1_PIO_WRITE_STATUS_1, 0};
- u64 pio2[] = {SH2_PIO_WRITE_STATUS_0, SH2_PIO_WRITE_STATUS_2,
- SH2_PIO_WRITE_STATUS_1, SH2_PIO_WRITE_STATUS_3};
- u64 *pio;
- pio = is_shub1() ? pio1 : pio2;
- pda->pio_write_status_addr =
- (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid, pio[slice]);
- pda->pio_write_status_val = is_shub1() ? SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK : 0;
- }
-
- /*
- * WAR addresses for SHUB 1.x.
- */
- if (local_node_data->active_cpu_count++ == 0 && is_shub1()) {
- int buddy_nasid;
- buddy_nasid =
- cnodeid_to_nasid(numa_node_id() ==
- num_online_nodes() - 1 ? 0 : numa_node_id() + 1);
- pda->pio_shub_war_cam_addr =
- (volatile unsigned long *)GLOBAL_MMR_ADDR(nasid,
- SH1_PI_CAM_CONTROL);
- }
-}
-
-/*
- * Build tables for converting between NASIDs and cnodes.
- */
-static inline int __init board_needs_cnode(int type)
-{
- return (type == KLTYPE_SNIA || type == KLTYPE_TIO);
-}
-
-void __init build_cnode_tables(void)
-{
- int nasid;
- int node;
- lboard_t *brd;
-
- memset(physical_node_map, -1, sizeof(physical_node_map));
- memset(sn_cnodeid_to_nasid, -1,
- sizeof(__ia64_per_cpu_var(__sn_cnodeid_to_nasid)));
-
- /*
- * First populate the tables with C/M bricks. This ensures that
- * cnode == node for all C & M bricks.
- */
- for_each_online_node(node) {
- nasid = pxm_to_nasid(node_to_pxm(node));
- sn_cnodeid_to_nasid[node] = nasid;
- physical_node_map[nasid] = node;
- }
-
- /*
- * num_cnodes is total number of C/M/TIO bricks. Because of the 256 node
- * limit on the number of nodes, we can't use the generic node numbers
- * for this. Note that num_cnodes is incremented below as TIOs or
- * headless/memoryless nodes are discovered.
- */
- num_cnodes = num_online_nodes();
-
- /* fakeprom does not support klgraph */
- if (IS_RUNNING_ON_FAKE_PROM())
- return;
-
- /* Find TIOs & headless/memoryless nodes and add them to the tables */
- for_each_online_node(node) {
- kl_config_hdr_t *klgraph_header;
- nasid = cnodeid_to_nasid(node);
- klgraph_header = ia64_sn_get_klconfig_addr(nasid);
- BUG_ON(klgraph_header == NULL);
- brd = NODE_OFFSET_TO_LBOARD(nasid, klgraph_header->ch_board_info);
- while (brd) {
- if (board_needs_cnode(brd->brd_type) && physical_node_map[brd->brd_nasid] < 0) {
- sn_cnodeid_to_nasid[num_cnodes] = brd->brd_nasid;
- physical_node_map[brd->brd_nasid] = num_cnodes++;
- }
- brd = find_lboard_next(brd);
- }
- }
-}
-
-int
-nasid_slice_to_cpuid(int nasid, int slice)
-{
- long cpu;
-
- for (cpu = 0; cpu < nr_cpu_ids; cpu++)
- if (cpuid_to_nasid(cpu) == nasid &&
- cpuid_to_slice(cpu) == slice)
- return cpu;
-
- return -1;
-}
-
-int sn_prom_feature_available(int id)
-{
- if (id >= BITS_PER_LONG * MAX_PROM_FEATURE_SETS)
- return 0;
- return test_bit(id, sn_prom_features);
-}
-
-void
-sn_kernel_launch_event(void)
-{
- /* ignore status until we understand possible failure, if any*/
- if (ia64_sn_kernel_launch_event())
- printk(KERN_ERR "KEXEC is not supported in this PROM, Please update the PROM.\n");
-}
-EXPORT_SYMBOL(sn_prom_feature_available);
-
+++ /dev/null
-# arch/ia64/sn/kernel/sn2/Makefile
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 1999,2001-2002 Silicon Graphics, Inc. All rights reserved.
-#
-# sn2 specific kernel files
-#
-
-obj-y += cache.o io.o ptc_deadlock.o sn2_smp.o sn_proc_fs.o \
- prominfo_proc.o timer.o timer_interrupt.o sn_hwperf.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001-2003, 2006 Silicon Graphics, Inc. All rights reserved.
- *
- */
-#include <linux/module.h>
-#include <asm/pgalloc.h>
-#include <asm/sn/arch.h>
-
-/**
- * sn_flush_all_caches - flush a range of address from all caches (incl. L4)
- * @flush_addr: identity mapped region 7 address to start flushing
- * @bytes: number of bytes to flush
- *
- * Flush a range of addresses from all caches including L4.
- * All addresses fully or partially contained within
- * @flush_addr to @flush_addr + @bytes are flushed
- * from all caches.
- */
-void
-sn_flush_all_caches(long flush_addr, long bytes)
-{
- unsigned long addr = flush_addr;
-
- /* SHub1 requires a cached address */
- if (is_shub1() && (addr & RGN_BITS) == RGN_BASE(RGN_UNCACHED))
- addr = (addr - RGN_BASE(RGN_UNCACHED)) + RGN_BASE(RGN_KERNEL);
-
- flush_icache_range(addr, addr + bytes);
- /*
- * The last call may have returned before the caches
- * were actually flushed, so we call it again to make
- * sure.
- */
- flush_icache_range(addr, addr + bytes);
- mb();
-}
-EXPORT_SYMBOL(sn_flush_all_caches);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003 Silicon Graphics, Inc. All rights reserved.
- *
- * The generic kernel requires function pointers to these routines, so
- * we wrap the inlines from asm/ia64/sn/sn2/io.h here.
- */
-
-#include <asm/sn/io.h>
-
-#ifdef CONFIG_IA64_GENERIC
-
-#undef __sn_inb
-#undef __sn_inw
-#undef __sn_inl
-#undef __sn_outb
-#undef __sn_outw
-#undef __sn_outl
-#undef __sn_readb
-#undef __sn_readw
-#undef __sn_readl
-#undef __sn_readq
-#undef __sn_readb_relaxed
-#undef __sn_readw_relaxed
-#undef __sn_readl_relaxed
-#undef __sn_readq_relaxed
-
-unsigned int __sn_inb(unsigned long port)
-{
- return ___sn_inb(port);
-}
-
-unsigned int __sn_inw(unsigned long port)
-{
- return ___sn_inw(port);
-}
-
-unsigned int __sn_inl(unsigned long port)
-{
- return ___sn_inl(port);
-}
-
-void __sn_outb(unsigned char val, unsigned long port)
-{
- ___sn_outb(val, port);
-}
-
-void __sn_outw(unsigned short val, unsigned long port)
-{
- ___sn_outw(val, port);
-}
-
-void __sn_outl(unsigned int val, unsigned long port)
-{
- ___sn_outl(val, port);
-}
-
-unsigned char __sn_readb(void __iomem *addr)
-{
- return ___sn_readb(addr);
-}
-
-unsigned short __sn_readw(void __iomem *addr)
-{
- return ___sn_readw(addr);
-}
-
-unsigned int __sn_readl(void __iomem *addr)
-{
- return ___sn_readl(addr);
-}
-
-unsigned long __sn_readq(void __iomem *addr)
-{
- return ___sn_readq(addr);
-}
-
-unsigned char __sn_readb_relaxed(void __iomem *addr)
-{
- return ___sn_readb_relaxed(addr);
-}
-
-unsigned short __sn_readw_relaxed(void __iomem *addr)
-{
- return ___sn_readw_relaxed(addr);
-}
-
-unsigned int __sn_readl_relaxed(void __iomem *addr)
-{
- return ___sn_readl_relaxed(addr);
-}
-
-unsigned long __sn_readq_relaxed(void __iomem *addr)
-{
- return ___sn_readq_relaxed(addr);
-}
-
-#endif
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1999,2001-2004, 2006 Silicon Graphics, Inc. All Rights Reserved.
- *
- * Module to export the system's Firmware Interface Tables, including
- * PROM revision numbers and banners, in /proc
- */
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/nodemask.h>
-#include <asm/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/addrs.h>
-
-MODULE_DESCRIPTION("PROM version reporting for /proc");
-MODULE_AUTHOR("Chad Talbott");
-MODULE_LICENSE("GPL");
-
-/* Standard Intel FIT entry types */
-#define FIT_ENTRY_FIT_HEADER 0x00 /* FIT header entry */
-#define FIT_ENTRY_PAL_B 0x01 /* PAL_B entry */
-/* Entries 0x02 through 0x0D reserved by Intel */
-#define FIT_ENTRY_PAL_A_PROC 0x0E /* Processor-specific PAL_A entry */
-#define FIT_ENTRY_PAL_A 0x0F /* PAL_A entry, same as... */
-#define FIT_ENTRY_PAL_A_GEN 0x0F /* ...Generic PAL_A entry */
-#define FIT_ENTRY_UNUSED 0x7F /* Unused (reserved by Intel?) */
-/* OEM-defined entries range from 0x10 to 0x7E. */
-#define FIT_ENTRY_SAL_A 0x10 /* SAL_A entry */
-#define FIT_ENTRY_SAL_B 0x11 /* SAL_B entry */
-#define FIT_ENTRY_SALRUNTIME 0x12 /* SAL runtime entry */
-#define FIT_ENTRY_EFI 0x1F /* EFI entry */
-#define FIT_ENTRY_FPSWA 0x20 /* embedded fpswa entry */
-#define FIT_ENTRY_VMLINUX 0x21 /* embedded vmlinux entry */
-
-#define FIT_MAJOR_SHIFT (32 + 8)
-#define FIT_MAJOR_MASK ((1 << 8) - 1)
-#define FIT_MINOR_SHIFT 32
-#define FIT_MINOR_MASK ((1 << 8) - 1)
-
-#define FIT_MAJOR(q) \
- ((unsigned) ((q) >> FIT_MAJOR_SHIFT) & FIT_MAJOR_MASK)
-#define FIT_MINOR(q) \
- ((unsigned) ((q) >> FIT_MINOR_SHIFT) & FIT_MINOR_MASK)
-
-#define FIT_TYPE_SHIFT (32 + 16)
-#define FIT_TYPE_MASK ((1 << 7) - 1)
-
-#define FIT_TYPE(q) \
- ((unsigned) ((q) >> FIT_TYPE_SHIFT) & FIT_TYPE_MASK)
-
-struct fit_type_map_t {
- unsigned char type;
- const char *name;
-};
-
-static const struct fit_type_map_t fit_entry_types[] = {
- {FIT_ENTRY_FIT_HEADER, "FIT Header"},
- {FIT_ENTRY_PAL_A_GEN, "Generic PAL_A"},
- {FIT_ENTRY_PAL_A_PROC, "Processor-specific PAL_A"},
- {FIT_ENTRY_PAL_A, "PAL_A"},
- {FIT_ENTRY_PAL_B, "PAL_B"},
- {FIT_ENTRY_SAL_A, "SAL_A"},
- {FIT_ENTRY_SAL_B, "SAL_B"},
- {FIT_ENTRY_SALRUNTIME, "SAL runtime"},
- {FIT_ENTRY_EFI, "EFI"},
- {FIT_ENTRY_VMLINUX, "Embedded Linux"},
- {FIT_ENTRY_FPSWA, "Embedded FPSWA"},
- {FIT_ENTRY_UNUSED, "Unused"},
- {0xff, "Error"},
-};
-
-static const char *fit_type_name(unsigned char type)
-{
- struct fit_type_map_t const *mapp;
-
- for (mapp = fit_entry_types; mapp->type != 0xff; mapp++)
- if (type == mapp->type)
- return mapp->name;
-
- if ((type > FIT_ENTRY_PAL_A) && (type < FIT_ENTRY_UNUSED))
- return "OEM type";
- if ((type > FIT_ENTRY_PAL_B) && (type < FIT_ENTRY_PAL_A))
- return "Reserved";
-
- return "Unknown type";
-}
-
-static int
-get_fit_entry(unsigned long nasid, int index, unsigned long *fentry,
- char *banner, int banlen)
-{
- return ia64_sn_get_fit_compt(nasid, index, fentry, banner, banlen);
-}
-
-
-/*
- * These two routines display the FIT table for each node.
- */
-static void dump_fit_entry(struct seq_file *m, unsigned long *fentry)
-{
- unsigned type;
-
- type = FIT_TYPE(fentry[1]);
- seq_printf(m, "%02x %-25s %x.%02x %016lx %u\n",
- type,
- fit_type_name(type),
- FIT_MAJOR(fentry[1]), FIT_MINOR(fentry[1]),
- fentry[0],
- /* mult by sixteen to get size in bytes */
- (unsigned)(fentry[1] & 0xffffff) * 16);
-}
-
-
-/*
- * We assume that the fit table will be small enough that we can print
- * the whole thing into one page. (This is true for our default 16kB
- * pages -- each entry is about 60 chars wide when printed.) I read
- * somewhere that the maximum size of the FIT is 128 entries, so we're
- * OK except for 4kB pages (and no one is going to do that on SN
- * anyway).
- */
-static int proc_fit_show(struct seq_file *m, void *v)
-{
- unsigned long nasid = (unsigned long)m->private;
- unsigned long fentry[2];
- int index;
-
- for (index=0;;index++) {
- BUG_ON(index * 60 > PAGE_SIZE);
- if (get_fit_entry(nasid, index, fentry, NULL, 0))
- break;
- dump_fit_entry(m, fentry);
- }
- return 0;
-}
-
-static int proc_version_show(struct seq_file *m, void *v)
-{
- unsigned long nasid = (unsigned long)m->private;
- unsigned long fentry[2];
- char banner[128];
- int index;
-
- for (index = 0; ; index++) {
- if (get_fit_entry(nasid, index, fentry, banner,
- sizeof(banner)))
- return 0;
- if (FIT_TYPE(fentry[1]) == FIT_ENTRY_SAL_A)
- break;
- }
-
- seq_printf(m, "%x.%02x\n", FIT_MAJOR(fentry[1]), FIT_MINOR(fentry[1]));
-
- if (banner[0])
- seq_printf(m, "%s\n", banner);
- return 0;
-}
-
-/* module entry points */
-int __init prominfo_init(void);
-void __exit prominfo_exit(void);
-
-module_init(prominfo_init);
-module_exit(prominfo_exit);
-
-#define NODE_NAME_LEN 11
-
-int __init prominfo_init(void)
-{
- struct proc_dir_entry *sgi_prominfo_entry;
- cnodeid_t cnodeid;
-
- if (!ia64_platform_is("sn2"))
- return 0;
-
- sgi_prominfo_entry = proc_mkdir("sgi_prominfo", NULL);
- if (!sgi_prominfo_entry)
- return -ENOMEM;
-
- for_each_online_node(cnodeid) {
- struct proc_dir_entry *dir;
- unsigned long nasid;
- char name[NODE_NAME_LEN];
-
- sprintf(name, "node%d", cnodeid);
- dir = proc_mkdir(name, sgi_prominfo_entry);
- if (!dir)
- continue;
- nasid = cnodeid_to_nasid(cnodeid);
- proc_create_single_data("fit", 0, dir, proc_fit_show,
- (void *)nasid);
- proc_create_single_data("version", 0, dir, proc_version_show,
- (void *)nasid);
- }
- return 0;
-}
-
-void __exit prominfo_exit(void)
-{
- remove_proc_subtree("sgi_prominfo", NULL);
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <asm/types.h>
-#include <asm/sn/shub_mmr.h>
-
-#define DEADLOCKBIT SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_SHFT
-#define WRITECOUNTMASK SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK
-#define ALIAS_OFFSET 8
-
-
- .global sn2_ptc_deadlock_recovery_core
- .proc sn2_ptc_deadlock_recovery_core
-
-sn2_ptc_deadlock_recovery_core:
- .regstk 6,0,0,0
-
- ptc0 = in0
- data0 = in1
- ptc1 = in2
- data1 = in3
- piowc = in4
- zeroval = in5
- piowcphy = r30
- psrsave = r2
- scr1 = r16
- scr2 = r17
- mask = r18
-
-
- extr.u piowcphy=piowc,0,61;; // Convert piowc to uncached physical address
- dep piowcphy=-1,piowcphy,63,1
- movl mask=WRITECOUNTMASK
- mov r8=r0
-
-1:
- cmp.ne p8,p9=r0,ptc1 // Test for shub type (ptc1 non-null on shub1)
- // p8 = 1 if shub1, p9 = 1 if shub2
-
- add scr2=ALIAS_OFFSET,piowc // Address of WRITE_STATUS alias register
- mov scr1=7;; // Clear DEADLOCK, WRITE_ERROR, MULTI_WRITE_ERROR
-(p8) st8.rel [scr2]=scr1;;
-(p9) ld8.acq scr1=[scr2];;
-
-5: ld8.acq scr1=[piowc];; // Wait for PIOs to complete.
- hint @pause
- and scr2=scr1,mask;; // mask of writecount bits
- cmp.ne p6,p0=zeroval,scr2
-(p6) br.cond.sptk 5b
-
-
-
- ////////////// BEGIN PHYSICAL MODE ////////////////////
- mov psrsave=psr // Disable IC (no PMIs)
- rsm psr.i | psr.dt | psr.ic;;
- srlz.i;;
-
- st8.rel [ptc0]=data0 // Write PTC0 & wait for completion.
-
-5: ld8.acq scr1=[piowcphy];; // Wait for PIOs to complete.
- hint @pause
- and scr2=scr1,mask;; // mask of writecount bits
- cmp.ne p6,p0=zeroval,scr2
-(p6) br.cond.sptk 5b;;
-
- tbit.nz p8,p7=scr1,DEADLOCKBIT;;// Test for DEADLOCK
-(p7) cmp.ne p7,p0=r0,ptc1;; // Test for non-null ptc1
-
-(p7) st8.rel [ptc1]=data1;; // Now write PTC1.
-
-5: ld8.acq scr1=[piowcphy];; // Wait for PIOs to complete.
- hint @pause
- and scr2=scr1,mask;; // mask of writecount bits
- cmp.ne p6,p0=zeroval,scr2
-(p6) br.cond.sptk 5b
-
- tbit.nz p8,p0=scr1,DEADLOCKBIT;;// Test for DEADLOCK
-
- mov psr.l=psrsave;; // Reenable IC
- srlz.i;;
- ////////////// END PHYSICAL MODE ////////////////////
-
-(p8) add r8=1,r8
-(p8) br.cond.spnt 1b;; // Repeat if DEADLOCK occurred.
-
- br.ret.sptk rp
- .endp sn2_ptc_deadlock_recovery_core
+++ /dev/null
-/*
- * SN2 Platform specific SMP Support
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/threads.h>
-#include <linux/sched.h>
-#include <linux/mm_types.h>
-#include <linux/smp.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/mmzone.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
-#include <linux/nodemask.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-
-#include <asm/processor.h>
-#include <asm/irq.h>
-#include <asm/sal.h>
-#include <asm/delay.h>
-#include <asm/io.h>
-#include <asm/smp.h>
-#include <asm/tlb.h>
-#include <asm/numa.h>
-#include <asm/hw_irq.h>
-#include <asm/current.h>
-#include <asm/sn/sn_cpuid.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/nodepda.h>
-#include <asm/sn/rw_mmr.h>
-#include <asm/sn/sn_feature_sets.h>
-
-DEFINE_PER_CPU(struct ptc_stats, ptcstats);
-DECLARE_PER_CPU(struct ptc_stats, ptcstats);
-
-static __cacheline_aligned DEFINE_SPINLOCK(sn2_global_ptc_lock);
-
-/* 0 = old algorithm (no IPI flushes), 1 = ipi deadlock flush, 2 = ipi instead of SHUB ptc, >2 = always ipi */
-static int sn2_flush_opt = 0;
-
-extern unsigned long
-sn2_ptc_deadlock_recovery_core(volatile unsigned long *, unsigned long,
- volatile unsigned long *, unsigned long,
- volatile unsigned long *, unsigned long);
-void
-sn2_ptc_deadlock_recovery(nodemask_t, short, short, int,
- volatile unsigned long *, unsigned long,
- volatile unsigned long *, unsigned long);
-
-/*
- * Note: some is the following is captured here to make degugging easier
- * (the macros make more sense if you see the debug patch - not posted)
- */
-#define sn2_ptctest 0
-#define local_node_uses_ptc_ga(sh1) ((sh1) ? 1 : 0)
-#define max_active_pio(sh1) ((sh1) ? 32 : 7)
-#define reset_max_active_on_deadlock() 1
-#define PTC_LOCK(sh1) ((sh1) ? &sn2_global_ptc_lock : &sn_nodepda->ptc_lock)
-
-struct ptc_stats {
- unsigned long ptc_l;
- unsigned long change_rid;
- unsigned long shub_ptc_flushes;
- unsigned long nodes_flushed;
- unsigned long deadlocks;
- unsigned long deadlocks2;
- unsigned long lock_itc_clocks;
- unsigned long shub_itc_clocks;
- unsigned long shub_itc_clocks_max;
- unsigned long shub_ptc_flushes_not_my_mm;
- unsigned long shub_ipi_flushes;
- unsigned long shub_ipi_flushes_itc_clocks;
-};
-
-#define sn2_ptctest 0
-
-static inline unsigned long wait_piowc(void)
-{
- volatile unsigned long *piows;
- unsigned long zeroval, ws;
-
- piows = pda->pio_write_status_addr;
- zeroval = pda->pio_write_status_val;
- do {
- cpu_relax();
- } while (((ws = *piows) & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK) != zeroval);
- return (ws & SH_PIO_WRITE_STATUS_WRITE_DEADLOCK_MASK) != 0;
-}
-
-/**
- * sn_migrate - SN-specific task migration actions
- * @task: Task being migrated to new CPU
- *
- * SN2 PIO writes from separate CPUs are not guaranteed to arrive in order.
- * Context switching user threads which have memory-mapped MMIO may cause
- * PIOs to issue from separate CPUs, thus the PIO writes must be drained
- * from the previous CPU's Shub before execution resumes on the new CPU.
- */
-void sn_migrate(struct task_struct *task)
-{
- pda_t *last_pda = pdacpu(task_thread_info(task)->last_cpu);
- volatile unsigned long *adr = last_pda->pio_write_status_addr;
- unsigned long val = last_pda->pio_write_status_val;
-
- /* Drain PIO writes from old CPU's Shub */
- while (unlikely((*adr & SH_PIO_WRITE_STATUS_PENDING_WRITE_COUNT_MASK)
- != val))
- cpu_relax();
-}
-
-static void
-sn2_ipi_flush_all_tlb(struct mm_struct *mm)
-{
- unsigned long itc;
-
- itc = ia64_get_itc();
- smp_flush_tlb_cpumask(*mm_cpumask(mm));
- itc = ia64_get_itc() - itc;
- __this_cpu_add(ptcstats.shub_ipi_flushes_itc_clocks, itc);
- __this_cpu_inc(ptcstats.shub_ipi_flushes);
-}
-
-/**
- * sn2_global_tlb_purge - globally purge translation cache of virtual address range
- * @mm: mm_struct containing virtual address range
- * @start: start of virtual address range
- * @end: end of virtual address range
- * @nbits: specifies number of bytes to purge per instruction (num = 1<<(nbits & 0xfc))
- *
- * Purges the translation caches of all processors of the given virtual address
- * range.
- *
- * Note:
- * - cpu_vm_mask is a bit mask that indicates which cpus have loaded the context.
- * - cpu_vm_mask is converted into a nodemask of the nodes containing the
- * cpus in cpu_vm_mask.
- * - if only one bit is set in cpu_vm_mask & it is the current cpu & the
- * process is purging its own virtual address range, then only the
- * local TLB needs to be flushed. This flushing can be done using
- * ptc.l. This is the common case & avoids the global spinlock.
- * - if multiple cpus have loaded the context, then flushing has to be
- * done with ptc.g/MMRs under protection of the global ptc_lock.
- */
-
-void
-sn2_global_tlb_purge(struct mm_struct *mm, unsigned long start,
- unsigned long end, unsigned long nbits)
-{
- int i, ibegin, shub1, cnode, mynasid, cpu, lcpu = 0, nasid;
- int mymm = (mm == current->active_mm && mm == current->mm);
- int use_cpu_ptcga;
- volatile unsigned long *ptc0, *ptc1;
- unsigned long itc, itc2, flags, data0 = 0, data1 = 0, rr_value, old_rr = 0;
- short nix;
- nodemask_t nodes_flushed;
- int active, max_active, deadlock, flush_opt = sn2_flush_opt;
-
- if (flush_opt > 2) {
- sn2_ipi_flush_all_tlb(mm);
- return;
- }
-
- nodes_clear(nodes_flushed);
- i = 0;
-
- for_each_cpu(cpu, mm_cpumask(mm)) {
- cnode = cpu_to_node(cpu);
- node_set(cnode, nodes_flushed);
- lcpu = cpu;
- i++;
- }
-
- if (i == 0)
- return;
-
- preempt_disable();
-
- if (likely(i == 1 && lcpu == smp_processor_id() && mymm)) {
- do {
- ia64_ptcl(start, nbits << 2);
- start += (1UL << nbits);
- } while (start < end);
- ia64_srlz_i();
- __this_cpu_inc(ptcstats.ptc_l);
- preempt_enable();
- return;
- }
-
- if (atomic_read(&mm->mm_users) == 1 && mymm) {
- flush_tlb_mm(mm);
- __this_cpu_inc(ptcstats.change_rid);
- preempt_enable();
- return;
- }
-
- if (flush_opt == 2) {
- sn2_ipi_flush_all_tlb(mm);
- preempt_enable();
- return;
- }
-
- itc = ia64_get_itc();
- nix = nodes_weight(nodes_flushed);
-
- rr_value = (mm->context << 3) | REGION_NUMBER(start);
-
- shub1 = is_shub1();
- if (shub1) {
- data0 = (1UL << SH1_PTC_0_A_SHFT) |
- (nbits << SH1_PTC_0_PS_SHFT) |
- (rr_value << SH1_PTC_0_RID_SHFT) |
- (1UL << SH1_PTC_0_START_SHFT);
- ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_0);
- ptc1 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH1_PTC_1);
- } else {
- data0 = (1UL << SH2_PTC_A_SHFT) |
- (nbits << SH2_PTC_PS_SHFT) |
- (1UL << SH2_PTC_START_SHFT);
- ptc0 = (long *)GLOBAL_MMR_PHYS_ADDR(0, SH2_PTC +
- (rr_value << SH2_PTC_RID_SHFT));
- ptc1 = NULL;
- }
-
-
- mynasid = get_nasid();
- use_cpu_ptcga = local_node_uses_ptc_ga(shub1);
- max_active = max_active_pio(shub1);
-
- itc = ia64_get_itc();
- spin_lock_irqsave(PTC_LOCK(shub1), flags);
- itc2 = ia64_get_itc();
-
- __this_cpu_add(ptcstats.lock_itc_clocks, itc2 - itc);
- __this_cpu_inc(ptcstats.shub_ptc_flushes);
- __this_cpu_add(ptcstats.nodes_flushed, nix);
- if (!mymm)
- __this_cpu_inc(ptcstats.shub_ptc_flushes_not_my_mm);
-
- if (use_cpu_ptcga && !mymm) {
- old_rr = ia64_get_rr(start);
- ia64_set_rr(start, (old_rr & 0xff) | (rr_value << 8));
- ia64_srlz_d();
- }
-
- wait_piowc();
- do {
- if (shub1)
- data1 = start | (1UL << SH1_PTC_1_START_SHFT);
- else
- data0 = (data0 & ~SH2_PTC_ADDR_MASK) | (start & SH2_PTC_ADDR_MASK);
- deadlock = 0;
- active = 0;
- ibegin = 0;
- i = 0;
- for_each_node_mask(cnode, nodes_flushed) {
- nasid = cnodeid_to_nasid(cnode);
- if (use_cpu_ptcga && unlikely(nasid == mynasid)) {
- ia64_ptcga(start, nbits << 2);
- ia64_srlz_i();
- } else {
- ptc0 = CHANGE_NASID(nasid, ptc0);
- if (ptc1)
- ptc1 = CHANGE_NASID(nasid, ptc1);
- pio_atomic_phys_write_mmrs(ptc0, data0, ptc1, data1);
- active++;
- }
- if (active >= max_active || i == (nix - 1)) {
- if ((deadlock = wait_piowc())) {
- if (flush_opt == 1)
- goto done;
- sn2_ptc_deadlock_recovery(nodes_flushed, ibegin, i, mynasid, ptc0, data0, ptc1, data1);
- if (reset_max_active_on_deadlock())
- max_active = 1;
- }
- active = 0;
- ibegin = i + 1;
- }
- i++;
- }
- start += (1UL << nbits);
- } while (start < end);
-
-done:
- itc2 = ia64_get_itc() - itc2;
- __this_cpu_add(ptcstats.shub_itc_clocks, itc2);
- if (itc2 > __this_cpu_read(ptcstats.shub_itc_clocks_max))
- __this_cpu_write(ptcstats.shub_itc_clocks_max, itc2);
-
- if (old_rr) {
- ia64_set_rr(start, old_rr);
- ia64_srlz_d();
- }
-
- spin_unlock_irqrestore(PTC_LOCK(shub1), flags);
-
- if (flush_opt == 1 && deadlock) {
- __this_cpu_inc(ptcstats.deadlocks);
- sn2_ipi_flush_all_tlb(mm);
- }
-
- preempt_enable();
-}
-
-/*
- * sn2_ptc_deadlock_recovery
- *
- * Recover from PTC deadlocks conditions. Recovery requires stepping thru each
- * TLB flush transaction. The recovery sequence is somewhat tricky & is
- * coded in assembly language.
- */
-
-void
-sn2_ptc_deadlock_recovery(nodemask_t nodes, short ib, short ie, int mynasid,
- volatile unsigned long *ptc0, unsigned long data0,
- volatile unsigned long *ptc1, unsigned long data1)
-{
- short nasid, i;
- int cnode;
- unsigned long *piows, zeroval, n;
-
- __this_cpu_inc(ptcstats.deadlocks);
-
- piows = (unsigned long *) pda->pio_write_status_addr;
- zeroval = pda->pio_write_status_val;
-
- i = 0;
- for_each_node_mask(cnode, nodes) {
- if (i < ib)
- goto next;
-
- if (i > ie)
- break;
-
- nasid = cnodeid_to_nasid(cnode);
- if (local_node_uses_ptc_ga(is_shub1()) && nasid == mynasid)
- goto next;
-
- ptc0 = CHANGE_NASID(nasid, ptc0);
- if (ptc1)
- ptc1 = CHANGE_NASID(nasid, ptc1);
-
- n = sn2_ptc_deadlock_recovery_core(ptc0, data0, ptc1, data1, piows, zeroval);
- __this_cpu_add(ptcstats.deadlocks2, n);
-next:
- i++;
- }
-
-}
-
-/**
- * sn_send_IPI_phys - send an IPI to a Nasid and slice
- * @nasid: nasid to receive the interrupt (may be outside partition)
- * @physid: physical cpuid to receive the interrupt.
- * @vector: command to send
- * @delivery_mode: delivery mechanism
- *
- * Sends an IPI (interprocessor interrupt) to the processor specified by
- * @physid
- *
- * @delivery_mode can be one of the following
- *
- * %IA64_IPI_DM_INT - pend an interrupt
- * %IA64_IPI_DM_PMI - pend a PMI
- * %IA64_IPI_DM_NMI - pend an NMI
- * %IA64_IPI_DM_INIT - pend an INIT interrupt
- */
-void sn_send_IPI_phys(int nasid, long physid, int vector, int delivery_mode)
-{
- long val;
- unsigned long flags = 0;
- volatile long *p;
-
- p = (long *)GLOBAL_MMR_PHYS_ADDR(nasid, SH_IPI_INT);
- val = (1UL << SH_IPI_INT_SEND_SHFT) |
- (physid << SH_IPI_INT_PID_SHFT) |
- ((long)delivery_mode << SH_IPI_INT_TYPE_SHFT) |
- ((long)vector << SH_IPI_INT_IDX_SHFT) |
- (0x000feeUL << SH_IPI_INT_BASE_SHFT);
-
- mb();
- if (enable_shub_wars_1_1()) {
- spin_lock_irqsave(&sn2_global_ptc_lock, flags);
- }
- pio_phys_write_mmr(p, val);
- if (enable_shub_wars_1_1()) {
- wait_piowc();
- spin_unlock_irqrestore(&sn2_global_ptc_lock, flags);
- }
-
-}
-
-EXPORT_SYMBOL(sn_send_IPI_phys);
-
-/**
- * sn2_send_IPI - send an IPI to a processor
- * @cpuid: target of the IPI
- * @vector: command to send
- * @delivery_mode: delivery mechanism
- * @redirect: redirect the IPI?
- *
- * Sends an IPI (InterProcessor Interrupt) to the processor specified by
- * @cpuid. @vector specifies the command to send, while @delivery_mode can
- * be one of the following
- *
- * %IA64_IPI_DM_INT - pend an interrupt
- * %IA64_IPI_DM_PMI - pend a PMI
- * %IA64_IPI_DM_NMI - pend an NMI
- * %IA64_IPI_DM_INIT - pend an INIT interrupt
- */
-void sn2_send_IPI(int cpuid, int vector, int delivery_mode, int redirect)
-{
- long physid;
- int nasid;
-
- physid = cpu_physical_id(cpuid);
- nasid = cpuid_to_nasid(cpuid);
-
- /* the following is used only when starting cpus at boot time */
- if (unlikely(nasid == -1))
- ia64_sn_get_sapic_info(physid, &nasid, NULL, NULL);
-
- sn_send_IPI_phys(nasid, physid, vector, delivery_mode);
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-/**
- * sn_cpu_disable_allowed - Determine if a CPU can be disabled.
- * @cpu - CPU that is requested to be disabled.
- *
- * CPU disable is only allowed on SHub2 systems running with a PROM
- * that supports CPU disable. It is not permitted to disable the boot processor.
- */
-bool sn_cpu_disable_allowed(int cpu)
-{
- if (is_shub2() && sn_prom_feature_available(PRF_CPU_DISABLE_SUPPORT)) {
- if (cpu != 0)
- return true;
- else
- printk(KERN_WARNING
- "Disabling the boot processor is not allowed.\n");
-
- } else
- printk(KERN_WARNING
- "CPU disable is not supported on this system.\n");
-
- return false;
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-
-#ifdef CONFIG_PROC_FS
-
-#define PTC_BASENAME "sgi_sn/ptc_statistics"
-
-static void *sn2_ptc_seq_start(struct seq_file *file, loff_t * offset)
-{
- if (*offset < nr_cpu_ids)
- return offset;
- return NULL;
-}
-
-static void *sn2_ptc_seq_next(struct seq_file *file, void *data, loff_t * offset)
-{
- (*offset)++;
- if (*offset < nr_cpu_ids)
- return offset;
- return NULL;
-}
-
-static void sn2_ptc_seq_stop(struct seq_file *file, void *data)
-{
-}
-
-static int sn2_ptc_seq_show(struct seq_file *file, void *data)
-{
- struct ptc_stats *stat;
- int cpu;
-
- cpu = *(loff_t *) data;
-
- if (!cpu) {
- seq_printf(file,
- "# cpu ptc_l newrid ptc_flushes nodes_flushed deadlocks lock_nsec shub_nsec shub_nsec_max not_my_mm deadlock2 ipi_fluches ipi_nsec\n");
- seq_printf(file, "# ptctest %d, flushopt %d\n", sn2_ptctest, sn2_flush_opt);
- }
-
- if (cpu < nr_cpu_ids && cpu_online(cpu)) {
- stat = &per_cpu(ptcstats, cpu);
- seq_printf(file, "cpu %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n", cpu, stat->ptc_l,
- stat->change_rid, stat->shub_ptc_flushes, stat->nodes_flushed,
- stat->deadlocks,
- 1000 * stat->lock_itc_clocks / per_cpu(ia64_cpu_info, cpu).cyc_per_usec,
- 1000 * stat->shub_itc_clocks / per_cpu(ia64_cpu_info, cpu).cyc_per_usec,
- 1000 * stat->shub_itc_clocks_max / per_cpu(ia64_cpu_info, cpu).cyc_per_usec,
- stat->shub_ptc_flushes_not_my_mm,
- stat->deadlocks2,
- stat->shub_ipi_flushes,
- 1000 * stat->shub_ipi_flushes_itc_clocks / per_cpu(ia64_cpu_info, cpu).cyc_per_usec);
- }
- return 0;
-}
-
-static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, size_t count, loff_t *data)
-{
- int cpu;
- char optstr[64];
-
- if (count == 0 || count > sizeof(optstr))
- return -EINVAL;
- if (copy_from_user(optstr, user, count))
- return -EFAULT;
- optstr[count - 1] = '\0';
- sn2_flush_opt = simple_strtoul(optstr, NULL, 0);
-
- for_each_online_cpu(cpu)
- memset(&per_cpu(ptcstats, cpu), 0, sizeof(struct ptc_stats));
-
- return count;
-}
-
-static const struct seq_operations sn2_ptc_seq_ops = {
- .start = sn2_ptc_seq_start,
- .next = sn2_ptc_seq_next,
- .stop = sn2_ptc_seq_stop,
- .show = sn2_ptc_seq_show
-};
-
-static int sn2_ptc_proc_open(struct inode *inode, struct file *file)
-{
- return seq_open(file, &sn2_ptc_seq_ops);
-}
-
-static const struct file_operations proc_sn2_ptc_operations = {
- .open = sn2_ptc_proc_open,
- .read = seq_read,
- .write = sn2_ptc_proc_write,
- .llseek = seq_lseek,
- .release = seq_release,
-};
-
-static struct proc_dir_entry *proc_sn2_ptc;
-
-static int __init sn2_ptc_init(void)
-{
- if (!ia64_platform_is("sn2"))
- return 0;
-
- proc_sn2_ptc = proc_create(PTC_BASENAME, 0444,
- NULL, &proc_sn2_ptc_operations);
- if (!proc_sn2_ptc) {
- printk(KERN_ERR "unable to create %s proc entry", PTC_BASENAME);
- return -EINVAL;
- }
- spin_lock_init(&sn2_global_ptc_lock);
- return 0;
-}
-
-static void __exit sn2_ptc_exit(void)
-{
- remove_proc_entry(PTC_BASENAME, NULL);
-}
-
-module_init(sn2_ptc_init);
-module_exit(sn2_ptc_exit);
-#endif /* CONFIG_PROC_FS */
-
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved.
- *
- * SGI Altix topology and hardware performance monitoring API.
- * Mark Goodwin <markgw@sgi.com>.
- *
- * Creates /proc/sgi_sn/sn_topology (read-only) to export
- * info about Altix nodes, routers, CPUs and NumaLink
- * interconnection/topology.
- *
- * Also creates a dynamic misc device named "sn_hwperf"
- * that supports an ioctl interface to call down into SAL
- * to discover hw objects, topology and to read/write
- * memory mapped registers, e.g. for performance monitoring.
- * The "sn_hwperf" device is registered only after the procfs
- * file is first opened, i.e. only if/when it's needed.
- *
- * This API is used by SGI Performance Co-Pilot and other
- * tools, see http://oss.sgi.com/projects/pcp
- */
-
-#include <linux/fs.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/vmalloc.h>
-#include <linux/seq_file.h>
-#include <linux/miscdevice.h>
-#include <linux/utsname.h>
-#include <linux/cpumask.h>
-#include <linux/nodemask.h>
-#include <linux/smp.h>
-#include <linux/mutex.h>
-
-#include <asm/processor.h>
-#include <asm/topology.h>
-#include <linux/uaccess.h>
-#include <asm/sal.h>
-#include <asm/sn/io.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/module.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/sn2/sn_hwperf.h>
-#include <asm/sn/addrs.h>
-
-static void *sn_hwperf_salheap = NULL;
-static int sn_hwperf_obj_cnt = 0;
-static nasid_t sn_hwperf_master_nasid = INVALID_NASID;
-static int sn_hwperf_init(void);
-static DEFINE_MUTEX(sn_hwperf_init_mutex);
-
-#define cnode_possible(n) ((n) < num_cnodes)
-
-static int sn_hwperf_enum_objects(int *nobj, struct sn_hwperf_object_info **ret)
-{
- int e;
- u64 sz;
- struct sn_hwperf_object_info *objbuf = NULL;
-
- if ((e = sn_hwperf_init()) < 0) {
- printk(KERN_ERR "sn_hwperf_init failed: err %d\n", e);
- goto out;
- }
-
- sz = sn_hwperf_obj_cnt * sizeof(struct sn_hwperf_object_info);
- objbuf = vmalloc(sz);
- if (objbuf == NULL) {
- printk("sn_hwperf_enum_objects: vmalloc(%d) failed\n", (int)sz);
- e = -ENOMEM;
- goto out;
- }
-
- e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, SN_HWPERF_ENUM_OBJECTS,
- 0, sz, (u64) objbuf, 0, 0, NULL);
- if (e != SN_HWPERF_OP_OK) {
- e = -EINVAL;
- vfree(objbuf);
- }
-
-out:
- *nobj = sn_hwperf_obj_cnt;
- *ret = objbuf;
- return e;
-}
-
-static int sn_hwperf_location_to_bpos(char *location,
- int *rack, int *bay, int *slot, int *slab)
-{
- char type;
-
- /* first scan for an old style geoid string */
- if (sscanf(location, "%03d%c%02d#%d",
- rack, &type, bay, slab) == 4)
- *slot = 0;
- else /* scan for a new bladed geoid string */
- if (sscanf(location, "%03d%c%02d^%02d#%d",
- rack, &type, bay, slot, slab) != 5)
- return -1;
- /* success */
- return 0;
-}
-
-static int sn_hwperf_geoid_to_cnode(char *location)
-{
- int cnode;
- geoid_t geoid;
- moduleid_t module_id;
- int rack, bay, slot, slab;
- int this_rack, this_bay, this_slot, this_slab;
-
- if (sn_hwperf_location_to_bpos(location, &rack, &bay, &slot, &slab))
- return -1;
-
- /*
- * FIXME: replace with cleaner for_each_XXX macro which addresses
- * both compute and IO nodes once ACPI3.0 is available.
- */
- for (cnode = 0; cnode < num_cnodes; cnode++) {
- geoid = cnodeid_get_geoid(cnode);
- module_id = geo_module(geoid);
- this_rack = MODULE_GET_RACK(module_id);
- this_bay = MODULE_GET_BPOS(module_id);
- this_slot = geo_slot(geoid);
- this_slab = geo_slab(geoid);
- if (rack == this_rack && bay == this_bay &&
- slot == this_slot && slab == this_slab) {
- break;
- }
- }
-
- return cnode_possible(cnode) ? cnode : -1;
-}
-
-static int sn_hwperf_obj_to_cnode(struct sn_hwperf_object_info * obj)
-{
- if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj))
- BUG();
- if (SN_HWPERF_FOREIGN(obj))
- return -1;
- return sn_hwperf_geoid_to_cnode(obj->location);
-}
-
-static int sn_hwperf_generic_ordinal(struct sn_hwperf_object_info *obj,
- struct sn_hwperf_object_info *objs)
-{
- int ordinal;
- struct sn_hwperf_object_info *p;
-
- for (ordinal=0, p=objs; p != obj; p++) {
- if (SN_HWPERF_FOREIGN(p))
- continue;
- if (SN_HWPERF_SAME_OBJTYPE(p, obj))
- ordinal++;
- }
-
- return ordinal;
-}
-
-static const char *slabname_node = "node"; /* SHub asic */
-static const char *slabname_ionode = "ionode"; /* TIO asic */
-static const char *slabname_router = "router"; /* NL3R or NL4R */
-static const char *slabname_other = "other"; /* unknown asic */
-
-static const char *sn_hwperf_get_slabname(struct sn_hwperf_object_info *obj,
- struct sn_hwperf_object_info *objs, int *ordinal)
-{
- int isnode;
- const char *slabname = slabname_other;
-
- if ((isnode = SN_HWPERF_IS_NODE(obj)) || SN_HWPERF_IS_IONODE(obj)) {
- slabname = isnode ? slabname_node : slabname_ionode;
- *ordinal = sn_hwperf_obj_to_cnode(obj);
- }
- else {
- *ordinal = sn_hwperf_generic_ordinal(obj, objs);
- if (SN_HWPERF_IS_ROUTER(obj))
- slabname = slabname_router;
- }
-
- return slabname;
-}
-
-static void print_pci_topology(struct seq_file *s)
-{
- char *p;
- size_t sz;
- int e;
-
- for (sz = PAGE_SIZE; sz < 16 * PAGE_SIZE; sz += PAGE_SIZE) {
- if (!(p = kmalloc(sz, GFP_KERNEL)))
- break;
- e = ia64_sn_ioif_get_pci_topology(__pa(p), sz);
- if (e == SALRET_OK)
- seq_puts(s, p);
- kfree(p);
- if (e == SALRET_OK || e == SALRET_NOT_IMPLEMENTED)
- break;
- }
-}
-
-static inline int sn_hwperf_has_cpus(cnodeid_t node)
-{
- return node < MAX_NUMNODES && node_online(node) && nr_cpus_node(node);
-}
-
-static inline int sn_hwperf_has_mem(cnodeid_t node)
-{
- return node < MAX_NUMNODES && node_online(node) && NODE_DATA(node)->node_present_pages;
-}
-
-static struct sn_hwperf_object_info *
-sn_hwperf_findobj_id(struct sn_hwperf_object_info *objbuf,
- int nobj, int id)
-{
- int i;
- struct sn_hwperf_object_info *p = objbuf;
-
- for (i=0; i < nobj; i++, p++) {
- if (p->id == id)
- return p;
- }
-
- return NULL;
-
-}
-
-static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objbuf,
- int nobj, cnodeid_t node, cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node)
-{
- int e;
- struct sn_hwperf_object_info *nodeobj = NULL;
- struct sn_hwperf_object_info *op;
- struct sn_hwperf_object_info *dest;
- struct sn_hwperf_object_info *router;
- struct sn_hwperf_port_info ptdata[16];
- int sz, i, j;
- cnodeid_t c;
- int found_mem = 0;
- int found_cpu = 0;
-
- if (!cnode_possible(node))
- return -EINVAL;
-
- if (sn_hwperf_has_cpus(node)) {
- if (near_cpu_node)
- *near_cpu_node = node;
- found_cpu++;
- }
-
- if (sn_hwperf_has_mem(node)) {
- if (near_mem_node)
- *near_mem_node = node;
- found_mem++;
- }
-
- if (found_cpu && found_mem)
- return 0; /* trivially successful */
-
- /* find the argument node object */
- for (i=0, op=objbuf; i < nobj; i++, op++) {
- if (!SN_HWPERF_IS_NODE(op) && !SN_HWPERF_IS_IONODE(op))
- continue;
- if (node == sn_hwperf_obj_to_cnode(op)) {
- nodeobj = op;
- break;
- }
- }
- if (!nodeobj) {
- e = -ENOENT;
- goto err;
- }
-
- /* get it's interconnect topology */
- sz = op->ports * sizeof(struct sn_hwperf_port_info);
- BUG_ON(sz > sizeof(ptdata));
- e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
- SN_HWPERF_ENUM_PORTS, nodeobj->id, sz,
- (u64)&ptdata, 0, 0, NULL);
- if (e != SN_HWPERF_OP_OK) {
- e = -EINVAL;
- goto err;
- }
-
- /* find nearest node with cpus and nearest memory */
- for (router=NULL, j=0; j < op->ports; j++) {
- dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id);
- if (dest && SN_HWPERF_IS_ROUTER(dest))
- router = dest;
- if (!dest || SN_HWPERF_FOREIGN(dest) ||
- !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) {
- continue;
- }
- c = sn_hwperf_obj_to_cnode(dest);
- if (!found_cpu && sn_hwperf_has_cpus(c)) {
- if (near_cpu_node)
- *near_cpu_node = c;
- found_cpu++;
- }
- if (!found_mem && sn_hwperf_has_mem(c)) {
- if (near_mem_node)
- *near_mem_node = c;
- found_mem++;
- }
- }
-
- if (router && (!found_cpu || !found_mem)) {
- /* search for a node connected to the same router */
- sz = router->ports * sizeof(struct sn_hwperf_port_info);
- BUG_ON(sz > sizeof(ptdata));
- e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
- SN_HWPERF_ENUM_PORTS, router->id, sz,
- (u64)&ptdata, 0, 0, NULL);
- if (e != SN_HWPERF_OP_OK) {
- e = -EINVAL;
- goto err;
- }
- for (j=0; j < router->ports; j++) {
- dest = sn_hwperf_findobj_id(objbuf, nobj,
- ptdata[j].conn_id);
- if (!dest || dest->id == node ||
- SN_HWPERF_FOREIGN(dest) ||
- !SN_HWPERF_IS_NODE(dest) ||
- SN_HWPERF_IS_IONODE(dest)) {
- continue;
- }
- c = sn_hwperf_obj_to_cnode(dest);
- if (!found_cpu && sn_hwperf_has_cpus(c)) {
- if (near_cpu_node)
- *near_cpu_node = c;
- found_cpu++;
- }
- if (!found_mem && sn_hwperf_has_mem(c)) {
- if (near_mem_node)
- *near_mem_node = c;
- found_mem++;
- }
- if (found_cpu && found_mem)
- break;
- }
- }
-
- if (!found_cpu || !found_mem) {
- /* resort to _any_ node with CPUs and memory */
- for (i=0, op=objbuf; i < nobj; i++, op++) {
- if (SN_HWPERF_FOREIGN(op) ||
- SN_HWPERF_IS_IONODE(op) ||
- !SN_HWPERF_IS_NODE(op)) {
- continue;
- }
- c = sn_hwperf_obj_to_cnode(op);
- if (!found_cpu && sn_hwperf_has_cpus(c)) {
- if (near_cpu_node)
- *near_cpu_node = c;
- found_cpu++;
- }
- if (!found_mem && sn_hwperf_has_mem(c)) {
- if (near_mem_node)
- *near_mem_node = c;
- found_mem++;
- }
- if (found_cpu && found_mem)
- break;
- }
- }
-
- if (!found_cpu || !found_mem)
- e = -ENODATA;
-
-err:
- return e;
-}
-
-
-static int sn_topology_show(struct seq_file *s, void *d)
-{
- int sz;
- int pt;
- int e = 0;
- int i;
- int j;
- const char *slabname;
- int ordinal;
- char slice;
- struct cpuinfo_ia64 *c;
- struct sn_hwperf_port_info *ptdata;
- struct sn_hwperf_object_info *p;
- struct sn_hwperf_object_info *obj = d; /* this object */
- struct sn_hwperf_object_info *objs = s->private; /* all objects */
- u8 shubtype;
- u8 system_size;
- u8 sharing_size;
- u8 partid;
- u8 coher;
- u8 nasid_shift;
- u8 region_size;
- u16 nasid_mask;
- int nasid_msb;
-
- if (obj == objs) {
- seq_printf(s, "# sn_topology version 2\n");
- seq_printf(s, "# objtype ordinal location partition"
- " [attribute value [, ...]]\n");
-
- if (ia64_sn_get_sn_info(0,
- &shubtype, &nasid_mask, &nasid_shift, &system_size,
- &sharing_size, &partid, &coher, ®ion_size))
- BUG();
- for (nasid_msb=63; nasid_msb > 0; nasid_msb--) {
- if (((u64)nasid_mask << nasid_shift) & (1ULL << nasid_msb))
- break;
- }
- seq_printf(s, "partition %u %s local "
- "shubtype %s, "
- "nasid_mask 0x%016llx, "
- "nasid_bits %d:%d, "
- "system_size %d, "
- "sharing_size %d, "
- "coherency_domain %d, "
- "region_size %d\n",
-
- partid, utsname()->nodename,
- shubtype ? "shub2" : "shub1",
- (u64)nasid_mask << nasid_shift, nasid_msb, nasid_shift,
- system_size, sharing_size, coher, region_size);
-
- print_pci_topology(s);
- }
-
- if (SN_HWPERF_FOREIGN(obj)) {
- /* private in another partition: not interesting */
- return 0;
- }
-
- for (i = 0; i < SN_HWPERF_MAXSTRING && obj->name[i]; i++) {
- if (obj->name[i] == ' ')
- obj->name[i] = '_';
- }
-
- slabname = sn_hwperf_get_slabname(obj, objs, &ordinal);
- seq_printf(s, "%s %d %s %s asic %s", slabname, ordinal, obj->location,
- obj->sn_hwp_this_part ? "local" : "shared", obj->name);
-
- if (ordinal < 0 || (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj)))
- seq_putc(s, '\n');
- else {
- cnodeid_t near_mem = -1;
- cnodeid_t near_cpu = -1;
-
- seq_printf(s, ", nasid 0x%x", cnodeid_to_nasid(ordinal));
-
- if (sn_hwperf_get_nearest_node_objdata(objs, sn_hwperf_obj_cnt,
- ordinal, &near_mem, &near_cpu) == 0) {
- seq_printf(s, ", near_mem_nodeid %d, near_cpu_nodeid %d",
- near_mem, near_cpu);
- }
-
- if (!SN_HWPERF_IS_IONODE(obj)) {
- for_each_online_node(i) {
- seq_printf(s, i ? ":%d" : ", dist %d",
- node_distance(ordinal, i));
- }
- }
-
- seq_putc(s, '\n');
-
- /*
- * CPUs on this node, if any
- */
- if (!SN_HWPERF_IS_IONODE(obj)) {
- for_each_cpu_and(i, cpu_online_mask,
- cpumask_of_node(ordinal)) {
- slice = 'a' + cpuid_to_slice(i);
- c = cpu_data(i);
- seq_printf(s, "cpu %d %s%c local"
- " freq %luMHz, arch ia64",
- i, obj->location, slice,
- c->proc_freq / 1000000);
- for_each_online_cpu(j) {
- seq_printf(s, j ? ":%d" : ", dist %d",
- node_distance(
- cpu_to_node(i),
- cpu_to_node(j)));
- }
- seq_putc(s, '\n');
- }
- }
- }
-
- if (obj->ports) {
- /*
- * numalink ports
- */
- sz = obj->ports * sizeof(struct sn_hwperf_port_info);
- if ((ptdata = kmalloc(sz, GFP_KERNEL)) == NULL)
- return -ENOMEM;
- e = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
- SN_HWPERF_ENUM_PORTS, obj->id, sz,
- (u64) ptdata, 0, 0, NULL);
- if (e != SN_HWPERF_OP_OK)
- return -EINVAL;
- for (ordinal=0, p=objs; p != obj; p++) {
- if (!SN_HWPERF_FOREIGN(p))
- ordinal += p->ports;
- }
- for (pt = 0; pt < obj->ports; pt++) {
- for (p = objs, i = 0; i < sn_hwperf_obj_cnt; i++, p++) {
- if (ptdata[pt].conn_id == p->id) {
- break;
- }
- }
- seq_printf(s, "numalink %d %s-%d",
- ordinal+pt, obj->location, ptdata[pt].port);
-
- if (i >= sn_hwperf_obj_cnt) {
- /* no connection */
- seq_puts(s, " local endpoint disconnected"
- ", protocol unknown\n");
- continue;
- }
-
- if (obj->sn_hwp_this_part && p->sn_hwp_this_part)
- /* both ends local to this partition */
- seq_puts(s, " local");
- else if (SN_HWPERF_FOREIGN(p))
- /* both ends of the link in foreign partition */
- seq_puts(s, " foreign");
- else
- /* link straddles a partition */
- seq_puts(s, " shared");
-
- /*
- * Unlikely, but strictly should query the LLP config
- * registers because an NL4R can be configured to run
- * NL3 protocol, even when not talking to an NL3 router.
- * Ditto for node-node.
- */
- seq_printf(s, " endpoint %s-%d, protocol %s\n",
- p->location, ptdata[pt].conn_port,
- (SN_HWPERF_IS_NL3ROUTER(obj) ||
- SN_HWPERF_IS_NL3ROUTER(p)) ? "LLP3" : "LLP4");
- }
- kfree(ptdata);
- }
-
- return 0;
-}
-
-static void *sn_topology_start(struct seq_file *s, loff_t * pos)
-{
- struct sn_hwperf_object_info *objs = s->private;
-
- if (*pos < sn_hwperf_obj_cnt)
- return (void *)(objs + *pos);
-
- return NULL;
-}
-
-static void *sn_topology_next(struct seq_file *s, void *v, loff_t * pos)
-{
- ++*pos;
- return sn_topology_start(s, pos);
-}
-
-static void sn_topology_stop(struct seq_file *m, void *v)
-{
- return;
-}
-
-/*
- * /proc/sgi_sn/sn_topology, read-only using seq_file
- */
-static const struct seq_operations sn_topology_seq_ops = {
- .start = sn_topology_start,
- .next = sn_topology_next,
- .stop = sn_topology_stop,
- .show = sn_topology_show
-};
-
-struct sn_hwperf_op_info {
- u64 op;
- struct sn_hwperf_ioctl_args *a;
- void *p;
- int *v0;
- int ret;
-};
-
-static void sn_hwperf_call_sal(void *info)
-{
- struct sn_hwperf_op_info *op_info = info;
- int r;
-
- r = ia64_sn_hwperf_op(sn_hwperf_master_nasid, op_info->op,
- op_info->a->arg, op_info->a->sz,
- (u64) op_info->p, 0, 0, op_info->v0);
- op_info->ret = r;
-}
-
-static long sn_hwperf_call_sal_work(void *info)
-{
- sn_hwperf_call_sal(info);
- return 0;
-}
-
-static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info)
-{
- u32 cpu;
- u32 use_ipi;
- int r = 0;
-
- cpu = (op_info->a->arg & SN_HWPERF_ARG_CPU_MASK) >> 32;
- use_ipi = op_info->a->arg & SN_HWPERF_ARG_USE_IPI_MASK;
- op_info->a->arg &= SN_HWPERF_ARG_OBJID_MASK;
-
- if (cpu != SN_HWPERF_ARG_ANY_CPU) {
- if (cpu >= nr_cpu_ids || !cpu_online(cpu)) {
- r = -EINVAL;
- goto out;
- }
- }
-
- if (cpu == SN_HWPERF_ARG_ANY_CPU) {
- /* don't care which cpu */
- sn_hwperf_call_sal(op_info);
- } else if (cpu == get_cpu()) {
- /* already on correct cpu */
- sn_hwperf_call_sal(op_info);
- put_cpu();
- } else {
- put_cpu();
- if (use_ipi) {
- /* use an interprocessor interrupt to call SAL */
- smp_call_function_single(cpu, sn_hwperf_call_sal,
- op_info, 1);
- } else {
- /* Call on the target CPU */
- work_on_cpu_safe(cpu, sn_hwperf_call_sal_work, op_info);
- }
- }
- r = op_info->ret;
-
-out:
- return r;
-}
-
-/* map SAL hwperf error code to system error code */
-static int sn_hwperf_map_err(int hwperf_err)
-{
- int e;
-
- switch(hwperf_err) {
- case SN_HWPERF_OP_OK:
- e = 0;
- break;
-
- case SN_HWPERF_OP_NOMEM:
- e = -ENOMEM;
- break;
-
- case SN_HWPERF_OP_NO_PERM:
- e = -EPERM;
- break;
-
- case SN_HWPERF_OP_IO_ERROR:
- e = -EIO;
- break;
-
- case SN_HWPERF_OP_BUSY:
- e = -EBUSY;
- break;
-
- case SN_HWPERF_OP_RECONFIGURE:
- e = -EAGAIN;
- break;
-
- case SN_HWPERF_OP_INVAL:
- default:
- e = -EINVAL;
- break;
- }
-
- return e;
-}
-
-/*
- * ioctl for "sn_hwperf" misc device
- */
-static long sn_hwperf_ioctl(struct file *fp, u32 op, unsigned long arg)
-{
- struct sn_hwperf_ioctl_args a;
- struct cpuinfo_ia64 *cdata;
- struct sn_hwperf_object_info *objs;
- struct sn_hwperf_object_info *cpuobj;
- struct sn_hwperf_op_info op_info;
- void *p = NULL;
- int nobj;
- char slice;
- int node;
- int r;
- int v0;
- int i;
- int j;
-
- /* only user requests are allowed here */
- if ((op & SN_HWPERF_OP_MASK) < 10) {
- r = -EINVAL;
- goto error;
- }
- r = copy_from_user(&a, (const void __user *)arg,
- sizeof(struct sn_hwperf_ioctl_args));
- if (r != 0) {
- r = -EFAULT;
- goto error;
- }
-
- /*
- * Allocate memory to hold a kernel copy of the user buffer. The
- * buffer contents are either copied in or out (or both) of user
- * space depending on the flags encoded in the requested operation.
- */
- if (a.ptr) {
- p = vmalloc(a.sz);
- if (!p) {
- r = -ENOMEM;
- goto error;
- }
- }
-
- if (op & SN_HWPERF_OP_MEM_COPYIN) {
- r = copy_from_user(p, (const void __user *)a.ptr, a.sz);
- if (r != 0) {
- r = -EFAULT;
- goto error;
- }
- }
-
- switch (op) {
- case SN_HWPERF_GET_CPU_INFO:
- if (a.sz == sizeof(u64)) {
- /* special case to get size needed */
- *(u64 *) p = (u64) num_online_cpus() *
- sizeof(struct sn_hwperf_object_info);
- } else
- if (a.sz < num_online_cpus() * sizeof(struct sn_hwperf_object_info)) {
- r = -ENOMEM;
- goto error;
- } else
- if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) {
- int cpuobj_index = 0;
-
- memset(p, 0, a.sz);
- for (i = 0; i < nobj; i++) {
- if (!SN_HWPERF_IS_NODE(objs + i))
- continue;
- node = sn_hwperf_obj_to_cnode(objs + i);
- for_each_online_cpu(j) {
- if (node != cpu_to_node(j))
- continue;
- cpuobj = (struct sn_hwperf_object_info *) p + cpuobj_index++;
- slice = 'a' + cpuid_to_slice(j);
- cdata = cpu_data(j);
- cpuobj->id = j;
- snprintf(cpuobj->name,
- sizeof(cpuobj->name),
- "CPU %luMHz %s",
- cdata->proc_freq / 1000000,
- cdata->vendor);
- snprintf(cpuobj->location,
- sizeof(cpuobj->location),
- "%s%c", objs[i].location,
- slice);
- }
- }
-
- vfree(objs);
- }
- break;
-
- case SN_HWPERF_GET_NODE_NASID:
- if (a.sz != sizeof(u64) ||
- (node = a.arg) < 0 || !cnode_possible(node)) {
- r = -EINVAL;
- goto error;
- }
- *(u64 *)p = (u64)cnodeid_to_nasid(node);
- break;
-
- case SN_HWPERF_GET_OBJ_NODE:
- i = a.arg;
- if (a.sz != sizeof(u64) || i < 0) {
- r = -EINVAL;
- goto error;
- }
- if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) {
- if (i >= nobj) {
- r = -EINVAL;
- vfree(objs);
- goto error;
- }
- if (objs[i].id != a.arg) {
- for (i = 0; i < nobj; i++) {
- if (objs[i].id == a.arg)
- break;
- }
- }
- if (i == nobj) {
- r = -EINVAL;
- vfree(objs);
- goto error;
- }
-
- if (!SN_HWPERF_IS_NODE(objs + i) &&
- !SN_HWPERF_IS_IONODE(objs + i)) {
- r = -ENOENT;
- vfree(objs);
- goto error;
- }
-
- *(u64 *)p = (u64)sn_hwperf_obj_to_cnode(objs + i);
- vfree(objs);
- }
- break;
-
- case SN_HWPERF_GET_MMRS:
- case SN_HWPERF_SET_MMRS:
- case SN_HWPERF_OBJECT_DISTANCE:
- op_info.p = p;
- op_info.a = &a;
- op_info.v0 = &v0;
- op_info.op = op;
- r = sn_hwperf_op_cpu(&op_info);
- if (r) {
- r = sn_hwperf_map_err(r);
- a.v0 = v0;
- goto error;
- }
- break;
-
- default:
- /* all other ops are a direct SAL call */
- r = ia64_sn_hwperf_op(sn_hwperf_master_nasid, op,
- a.arg, a.sz, (u64) p, 0, 0, &v0);
- if (r) {
- r = sn_hwperf_map_err(r);
- goto error;
- }
- a.v0 = v0;
- break;
- }
-
- if (op & SN_HWPERF_OP_MEM_COPYOUT) {
- r = copy_to_user((void __user *)a.ptr, p, a.sz);
- if (r != 0) {
- r = -EFAULT;
- goto error;
- }
- }
-
-error:
- vfree(p);
-
- return r;
-}
-
-static const struct file_operations sn_hwperf_fops = {
- .unlocked_ioctl = sn_hwperf_ioctl,
- .llseek = noop_llseek,
-};
-
-static struct miscdevice sn_hwperf_dev = {
- MISC_DYNAMIC_MINOR,
- "sn_hwperf",
- &sn_hwperf_fops
-};
-
-static int sn_hwperf_init(void)
-{
- u64 v;
- int salr;
- int e = 0;
-
- /* single threaded, once-only initialization */
- mutex_lock(&sn_hwperf_init_mutex);
-
- if (sn_hwperf_salheap) {
- mutex_unlock(&sn_hwperf_init_mutex);
- return e;
- }
-
- /*
- * The PROM code needs a fixed reference node. For convenience the
- * same node as the console I/O is used.
- */
- sn_hwperf_master_nasid = (nasid_t) ia64_sn_get_console_nasid();
-
- /*
- * Request the needed size and install the PROM scratch area.
- * The PROM keeps various tracking bits in this memory area.
- */
- salr = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
- (u64) SN_HWPERF_GET_HEAPSIZE, 0,
- (u64) sizeof(u64), (u64) &v, 0, 0, NULL);
- if (salr != SN_HWPERF_OP_OK) {
- e = -EINVAL;
- goto out;
- }
-
- if ((sn_hwperf_salheap = vmalloc(v)) == NULL) {
- e = -ENOMEM;
- goto out;
- }
- salr = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
- SN_HWPERF_INSTALL_HEAP, 0, v,
- (u64) sn_hwperf_salheap, 0, 0, NULL);
- if (salr != SN_HWPERF_OP_OK) {
- e = -EINVAL;
- goto out;
- }
-
- salr = ia64_sn_hwperf_op(sn_hwperf_master_nasid,
- SN_HWPERF_OBJECT_COUNT, 0,
- sizeof(u64), (u64) &v, 0, 0, NULL);
- if (salr != SN_HWPERF_OP_OK) {
- e = -EINVAL;
- goto out;
- }
- sn_hwperf_obj_cnt = (int)v;
-
-out:
- if (e < 0 && sn_hwperf_salheap) {
- vfree(sn_hwperf_salheap);
- sn_hwperf_salheap = NULL;
- sn_hwperf_obj_cnt = 0;
- }
- mutex_unlock(&sn_hwperf_init_mutex);
- return e;
-}
-
-int sn_topology_open(struct inode *inode, struct file *file)
-{
- int e;
- struct seq_file *seq;
- struct sn_hwperf_object_info *objbuf;
- int nobj;
-
- if ((e = sn_hwperf_enum_objects(&nobj, &objbuf)) == 0) {
- e = seq_open(file, &sn_topology_seq_ops);
- seq = file->private_data;
- seq->private = objbuf;
- }
-
- return e;
-}
-
-int sn_topology_release(struct inode *inode, struct file *file)
-{
- struct seq_file *seq = file->private_data;
-
- vfree(seq->private);
- return seq_release(inode, file);
-}
-
-int sn_hwperf_get_nearest_node(cnodeid_t node,
- cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node)
-{
- int e;
- int nobj;
- struct sn_hwperf_object_info *objbuf;
-
- if ((e = sn_hwperf_enum_objects(&nobj, &objbuf)) == 0) {
- e = sn_hwperf_get_nearest_node_objdata(objbuf, nobj,
- node, near_mem_node, near_cpu_node);
- vfree(objbuf);
- }
-
- return e;
-}
-
-static int sn_hwperf_misc_register_init(void)
-{
- int e;
-
- if (!ia64_platform_is("sn2"))
- return 0;
-
- sn_hwperf_init();
-
- /*
- * Register a dynamic misc device for hwperf ioctls. Platforms
- * supporting hotplug will create /dev/sn_hwperf, else user
- * can to look up the minor number in /proc/misc.
- */
- if ((e = misc_register(&sn_hwperf_dev)) != 0) {
- printk(KERN_ERR "sn_hwperf_misc_register_init: failed to "
- "register misc device for \"%s\"\n", sn_hwperf_dev.name);
- }
-
- return e;
-}
-
-device_initcall(sn_hwperf_misc_register_init); /* after misc_init() */
-EXPORT_SYMBOL(sn_hwperf_get_nearest_node);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifdef CONFIG_PROC_FS
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/uaccess.h>
-#include <asm/sn/sn_sal.h>
-
-static int partition_id_show(struct seq_file *s, void *p)
-{
- seq_printf(s, "%d\n", sn_partition_id);
- return 0;
-}
-
-static int system_serial_number_show(struct seq_file *s, void *p)
-{
- seq_printf(s, "%s\n", sn_system_serial_number());
- return 0;
-}
-
-static int licenseID_show(struct seq_file *s, void *p)
-{
- seq_printf(s, "0x%llx\n", sn_partition_serial_number_val());
- return 0;
-}
-
-static int coherence_id_show(struct seq_file *s, void *p)
-{
- seq_printf(s, "%d\n", partition_coherence_id());
-
- return 0;
-}
-
-/* /proc/sgi_sn/sn_topology uses seq_file, see sn_hwperf.c */
-extern int sn_topology_open(struct inode *, struct file *);
-extern int sn_topology_release(struct inode *, struct file *);
-
-static const struct file_operations proc_sn_topo_fops = {
- .open = sn_topology_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = sn_topology_release,
-};
-
-void register_sn_procfs(void)
-{
- static struct proc_dir_entry *sgi_proc_dir = NULL;
-
- BUG_ON(sgi_proc_dir != NULL);
- if (!(sgi_proc_dir = proc_mkdir("sgi_sn", NULL)))
- return;
-
- proc_create_single("partition_id", 0444, sgi_proc_dir,
- partition_id_show);
- proc_create_single("system_serial_number", 0444, sgi_proc_dir,
- system_serial_number_show);
- proc_create_single("licenseID", 0444, sgi_proc_dir, licenseID_show);
- proc_create_single("coherence_id", 0444, sgi_proc_dir,
- coherence_id_show);
- proc_create("sn_topology", 0444, sgi_proc_dir, &proc_sn_topo_fops);
-}
-
-#endif /* CONFIG_PROC_FS */
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0
-/*
- * linux/arch/ia64/sn/kernel/sn2/timer.c
- *
- * Copyright (C) 2003 Silicon Graphics, Inc.
- * Copyright (C) 2003 Hewlett-Packard Co
- * David Mosberger <davidm@hpl.hp.com>: updated for new timer-interpolation infrastructure
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/time.h>
-#include <linux/interrupt.h>
-#include <linux/clocksource.h>
-
-#include <asm/hw_irq.h>
-#include <asm/timex.h>
-
-#include <asm/sn/leds.h>
-#include <asm/sn/shub_mmr.h>
-#include <asm/sn/clksupport.h>
-
-extern unsigned long sn_rtc_cycles_per_second;
-
-static u64 read_sn2(struct clocksource *cs)
-{
- return (u64)readq(RTC_COUNTER_ADDR);
-}
-
-static struct clocksource clocksource_sn2 = {
- .name = "sn2_rtc",
- .rating = 450,
- .read = read_sn2,
- .mask = (1LL << 55) - 1,
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-};
-
-/*
- * sn udelay uses the RTC instead of the ITC because the ITC is not
- * synchronized across all CPUs, and the thread may migrate to another CPU
- * if preemption is enabled.
- */
-static void
-ia64_sn_udelay (unsigned long usecs)
-{
- unsigned long start = rtc_time();
- unsigned long end = start +
- usecs * sn_rtc_cycles_per_second / 1000000;
-
- while (time_before((unsigned long)rtc_time(), end))
- cpu_relax();
-}
-
-void __init sn_timer_init(void)
-{
- clocksource_sn2.archdata.fsys_mmio = RTC_COUNTER_ADDR;
- clocksource_register_hz(&clocksource_sn2, sn_rtc_cycles_per_second);
-
- ia64_udelay = &ia64_sn_udelay;
-}
+++ /dev/null
-/*
- *
- *
- * Copyright (c) 2005, 2006 Silicon Graphics, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * Further, this software is distributed without any warranty that it is
- * free of the rightful claim of any third person regarding infringement
- * or the like. Any license provided herein, whether implied or
- * otherwise, applies only to this software file. Patent licenses, if
- * any, provided herein do not apply to combinations of this program with
- * other software, or any other product whatsoever.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * For further information regarding this notice, see:
- *
- * http://oss.sgi.com/projects/GenInfo/NoticeExplan
- */
-
-#include <linux/interrupt.h>
-#include <asm/sn/pda.h>
-#include <asm/sn/leds.h>
-
-extern void sn_lb_int_war_check(void);
-extern irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-
-#define SN_LB_INT_WAR_INTERVAL 100
-
-void sn_timer_interrupt(int irq, void *dev_id)
-{
- /* LED blinking */
- if (!pda->hb_count--) {
- pda->hb_count = HZ / 2;
- set_led_bits(pda->hb_state ^=
- LED_CPU_HEARTBEAT, LED_CPU_HEARTBEAT);
- }
-
- if (is_shub1()) {
- if (enable_shub_wars_1_1()) {
- /* Bugfix code for SHUB 1.1 */
- if (pda->pio_shub_war_cam_addr)
- *pda->pio_shub_war_cam_addr = 0x8000000000000010UL;
- }
- if (pda->sn_lb_int_war_ticks == 0)
- sn_lb_int_war_check();
- pda->sn_lb_int_war_ticks++;
- if (pda->sn_lb_int_war_ticks >= SN_LB_INT_WAR_INTERVAL)
- pda->sn_lb_int_war_ticks = 0;
- }
-}
+++ /dev/null
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2000-2004 Silicon Graphics, Inc. All Rights Reserved.
-#
-# Makefile for the sn pci general routines.
-
-obj-y := pci_dma.o tioca_provider.o tioce_provider.o pcibr/
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2000,2002-2005 Silicon Graphics, Inc. All rights reserved.
- *
- * Routines for PCI DMA mapping. See Documentation/DMA-API.txt for
- * a description of how these routines should be used.
- */
-
-#include <linux/gfp.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <asm/dma.h>
-#include <asm/sn/intr.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/sn_sal.h>
-
-#define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg)))
-#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
-
-/**
- * sn_dma_supported - test a DMA mask
- * @dev: device to test
- * @mask: DMA mask to test
- *
- * Return whether the given PCI device DMA address mask can be supported
- * properly. For example, if your device can only drive the low 24-bits
- * during PCI bus mastering, then you would pass 0x00ffffff as the mask to
- * this function. Of course, SN only supports devices that have 32 or more
- * address bits when using the PMU.
- */
-static int sn_dma_supported(struct device *dev, u64 mask)
-{
- BUG_ON(!dev_is_pci(dev));
-
- if (mask < 0x7fffffff)
- return 0;
- return 1;
-}
-
-/**
- * sn_dma_set_mask - set the DMA mask
- * @dev: device to set
- * @dma_mask: new mask
- *
- * Set @dev's DMA mask if the hw supports it.
- */
-int sn_dma_set_mask(struct device *dev, u64 dma_mask)
-{
- BUG_ON(!dev_is_pci(dev));
-
- if (!sn_dma_supported(dev, dma_mask))
- return 0;
-
- *dev->dma_mask = dma_mask;
- return 1;
-}
-EXPORT_SYMBOL(sn_dma_set_mask);
-
-/**
- * sn_dma_alloc_coherent - allocate memory for coherent DMA
- * @dev: device to allocate for
- * @size: size of the region
- * @dma_handle: DMA (bus) address
- * @flags: memory allocation flags
- *
- * dma_alloc_coherent() returns a pointer to a memory region suitable for
- * coherent DMA traffic to/from a PCI device. On SN platforms, this means
- * that @dma_handle will have the %PCIIO_DMA_CMD flag set.
- *
- * This interface is usually used for "command" streams (e.g. the command
- * queue for a SCSI controller). See Documentation/DMA-API.txt for
- * more information.
- */
-static void *sn_dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, gfp_t flags,
- unsigned long attrs)
-{
- void *cpuaddr;
- unsigned long phys_addr;
- int node;
- struct pci_dev *pdev = to_pci_dev(dev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
-
- BUG_ON(!dev_is_pci(dev));
-
- /*
- * Allocate the memory.
- */
- node = pcibus_to_node(pdev->bus);
- if (likely(node >=0)) {
- struct page *p = __alloc_pages_node(node,
- flags, get_order(size));
-
- if (likely(p))
- cpuaddr = page_address(p);
- else
- return NULL;
- } else
- cpuaddr = (void *)__get_free_pages(flags, get_order(size));
-
- if (unlikely(!cpuaddr))
- return NULL;
-
- memset(cpuaddr, 0x0, size);
-
- /* physical addr. of the memory we just got */
- phys_addr = __pa(cpuaddr);
-
- /*
- * 64 bit address translations should never fail.
- * 32 bit translations can fail if there are insufficient mapping
- * resources.
- */
-
- *dma_handle = provider->dma_map_consistent(pdev, phys_addr, size,
- SN_DMA_ADDR_PHYS);
- if (!*dma_handle) {
- printk(KERN_ERR "%s: out of ATEs\n", __func__);
- free_pages((unsigned long)cpuaddr, get_order(size));
- return NULL;
- }
-
- return cpuaddr;
-}
-
-/**
- * sn_pci_free_coherent - free memory associated with coherent DMAable region
- * @dev: device to free for
- * @size: size to free
- * @cpu_addr: kernel virtual address to free
- * @dma_handle: DMA address associated with this region
- *
- * Frees the memory allocated by dma_alloc_coherent(), potentially unmapping
- * any associated IOMMU mappings.
- */
-static void sn_dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
- dma_addr_t dma_handle, unsigned long attrs)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
-
- BUG_ON(!dev_is_pci(dev));
-
- provider->dma_unmap(pdev, dma_handle, 0);
- free_pages((unsigned long)cpu_addr, get_order(size));
-}
-
-/**
- * sn_dma_map_single_attrs - map a single page for DMA
- * @dev: device to map for
- * @cpu_addr: kernel virtual address of the region to map
- * @size: size of the region
- * @direction: DMA direction
- * @attrs: optional dma attributes
- *
- * Map the region pointed to by @cpu_addr for DMA and return the
- * DMA address.
- *
- * We map this to the one step pcibr_dmamap_trans interface rather than
- * the two step pcibr_dmamap_alloc/pcibr_dmamap_addr because we have
- * no way of saving the dmamap handle from the alloc to later free
- * (which is pretty much unacceptable).
- *
- * mappings with the DMA_ATTR_WRITE_BARRIER get mapped with
- * dma_map_consistent() so that writes force a flush of pending DMA.
- * (See "SGI Altix Architecture Considerations for Linux Device Drivers",
- * Document Number: 007-4763-001)
- *
- * TODO: simplify our interface;
- * figure out how to save dmamap handle so can use two step.
- */
-static dma_addr_t sn_dma_map_page(struct device *dev, struct page *page,
- unsigned long offset, size_t size,
- enum dma_data_direction dir,
- unsigned long attrs)
-{
- void *cpu_addr = page_address(page) + offset;
- dma_addr_t dma_addr;
- unsigned long phys_addr;
- struct pci_dev *pdev = to_pci_dev(dev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
-
- BUG_ON(!dev_is_pci(dev));
-
- phys_addr = __pa(cpu_addr);
- if (attrs & DMA_ATTR_WRITE_BARRIER)
- dma_addr = provider->dma_map_consistent(pdev, phys_addr,
- size, SN_DMA_ADDR_PHYS);
- else
- dma_addr = provider->dma_map(pdev, phys_addr, size,
- SN_DMA_ADDR_PHYS);
-
- if (!dma_addr) {
- printk(KERN_ERR "%s: out of ATEs\n", __func__);
- return DMA_MAPPING_ERROR;
- }
- return dma_addr;
-}
-
-/**
- * sn_dma_unmap_single_attrs - unamp a DMA mapped page
- * @dev: device to sync
- * @dma_addr: DMA address to sync
- * @size: size of region
- * @direction: DMA direction
- * @attrs: optional dma attributes
- *
- * This routine is supposed to sync the DMA region specified
- * by @dma_handle into the coherence domain. On SN, we're always cache
- * coherent, so we just need to free any ATEs associated with this mapping.
- */
-static void sn_dma_unmap_page(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction dir,
- unsigned long attrs)
-{
- struct pci_dev *pdev = to_pci_dev(dev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
-
- BUG_ON(!dev_is_pci(dev));
-
- provider->dma_unmap(pdev, dma_addr, dir);
-}
-
-/**
- * sn_dma_unmap_sg - unmap a DMA scatterlist
- * @dev: device to unmap
- * @sg: scatterlist to unmap
- * @nhwentries: number of scatterlist entries
- * @direction: DMA direction
- * @attrs: optional dma attributes
- *
- * Unmap a set of streaming mode DMA translations.
- */
-static void sn_dma_unmap_sg(struct device *dev, struct scatterlist *sgl,
- int nhwentries, enum dma_data_direction dir,
- unsigned long attrs)
-{
- int i;
- struct pci_dev *pdev = to_pci_dev(dev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
- struct scatterlist *sg;
-
- BUG_ON(!dev_is_pci(dev));
-
- for_each_sg(sgl, sg, nhwentries, i) {
- provider->dma_unmap(pdev, sg->dma_address, dir);
- sg->dma_address = (dma_addr_t) NULL;
- sg->dma_length = 0;
- }
-}
-
-/**
- * sn_dma_map_sg - map a scatterlist for DMA
- * @dev: device to map for
- * @sg: scatterlist to map
- * @nhwentries: number of entries
- * @direction: direction of the DMA transaction
- * @attrs: optional dma attributes
- *
- * mappings with the DMA_ATTR_WRITE_BARRIER get mapped with
- * dma_map_consistent() so that writes force a flush of pending DMA.
- * (See "SGI Altix Architecture Considerations for Linux Device Drivers",
- * Document Number: 007-4763-001)
- *
- * Maps each entry of @sg for DMA.
- */
-static int sn_dma_map_sg(struct device *dev, struct scatterlist *sgl,
- int nhwentries, enum dma_data_direction dir,
- unsigned long attrs)
-{
- unsigned long phys_addr;
- struct scatterlist *saved_sg = sgl, *sg;
- struct pci_dev *pdev = to_pci_dev(dev);
- struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
- int i;
-
- BUG_ON(!dev_is_pci(dev));
-
- /*
- * Setup a DMA address for each entry in the scatterlist.
- */
- for_each_sg(sgl, sg, nhwentries, i) {
- dma_addr_t dma_addr;
- phys_addr = SG_ENT_PHYS_ADDRESS(sg);
- if (attrs & DMA_ATTR_WRITE_BARRIER)
- dma_addr = provider->dma_map_consistent(pdev,
- phys_addr,
- sg->length,
- SN_DMA_ADDR_PHYS);
- else
- dma_addr = provider->dma_map(pdev, phys_addr,
- sg->length,
- SN_DMA_ADDR_PHYS);
-
- sg->dma_address = dma_addr;
- if (!sg->dma_address) {
- printk(KERN_ERR "%s: out of ATEs\n", __func__);
-
- /*
- * Free any successfully allocated entries.
- */
- if (i > 0)
- sn_dma_unmap_sg(dev, saved_sg, i, dir, attrs);
- return 0;
- }
-
- sg->dma_length = sg->length;
- }
-
- return nhwentries;
-}
-
-static u64 sn_dma_get_required_mask(struct device *dev)
-{
- return DMA_BIT_MASK(64);
-}
-
-char *sn_pci_get_legacy_mem(struct pci_bus *bus)
-{
- if (!SN_PCIBUS_BUSSOFT(bus))
- return ERR_PTR(-ENODEV);
-
- return (char *)(SN_PCIBUS_BUSSOFT(bus)->bs_legacy_mem | __IA64_UNCACHED_OFFSET);
-}
-
-int sn_pci_legacy_read(struct pci_bus *bus, u16 port, u32 *val, u8 size)
-{
- unsigned long addr;
- int ret;
- struct ia64_sal_retval isrv;
-
- /*
- * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
- * around hw issues at the pci bus level. SGI proms older than
- * 4.10 don't implement this.
- */
-
- SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
- pci_domain_nr(bus), bus->number,
- 0, /* io */
- 0, /* read */
- port, size, __pa(val));
-
- if (isrv.status == 0)
- return size;
-
- /*
- * If the above failed, retry using the SAL_PROBE call which should
- * be present in all proms (but which cannot work round PCI chipset
- * bugs). This code is retained for compatibility with old
- * pre-4.10 proms, and should be removed at some point in the future.
- */
-
- if (!SN_PCIBUS_BUSSOFT(bus))
- return -ENODEV;
-
- addr = SN_PCIBUS_BUSSOFT(bus)->bs_legacy_io | __IA64_UNCACHED_OFFSET;
- addr += port;
-
- ret = ia64_sn_probe_mem(addr, (long)size, (void *)val);
-
- if (ret == 2)
- return -EINVAL;
-
- if (ret == 1)
- *val = -1;
-
- return size;
-}
-
-int sn_pci_legacy_write(struct pci_bus *bus, u16 port, u32 val, u8 size)
-{
- int ret = size;
- unsigned long paddr;
- unsigned long *addr;
- struct ia64_sal_retval isrv;
-
- /*
- * First, try the SN_SAL_IOIF_PCI_SAFE SAL call which can work
- * around hw issues at the pci bus level. SGI proms older than
- * 4.10 don't implement this.
- */
-
- SAL_CALL(isrv, SN_SAL_IOIF_PCI_SAFE,
- pci_domain_nr(bus), bus->number,
- 0, /* io */
- 1, /* write */
- port, size, __pa(&val));
-
- if (isrv.status == 0)
- return size;
-
- /*
- * If the above failed, retry using the SAL_PROBE call which should
- * be present in all proms (but which cannot work round PCI chipset
- * bugs). This code is retained for compatibility with old
- * pre-4.10 proms, and should be removed at some point in the future.
- */
-
- if (!SN_PCIBUS_BUSSOFT(bus)) {
- ret = -ENODEV;
- goto out;
- }
-
- /* Put the phys addr in uncached space */
- paddr = SN_PCIBUS_BUSSOFT(bus)->bs_legacy_io | __IA64_UNCACHED_OFFSET;
- paddr += port;
- addr = (unsigned long *)paddr;
-
- switch (size) {
- case 1:
- *(volatile u8 *)(addr) = (u8)(val);
- break;
- case 2:
- *(volatile u16 *)(addr) = (u16)(val);
- break;
- case 4:
- *(volatile u32 *)(addr) = (u32)(val);
- break;
- default:
- ret = -EINVAL;
- break;
- }
- out:
- return ret;
-}
-
-static struct dma_map_ops sn_dma_ops = {
- .alloc = sn_dma_alloc_coherent,
- .free = sn_dma_free_coherent,
- .map_page = sn_dma_map_page,
- .unmap_page = sn_dma_unmap_page,
- .map_sg = sn_dma_map_sg,
- .unmap_sg = sn_dma_unmap_sg,
- .dma_supported = sn_dma_supported,
- .get_required_mask = sn_dma_get_required_mask,
-};
-
-void sn_dma_init(void)
-{
- dma_ops = &sn_dma_ops;
-}
+++ /dev/null
-#
-# This file is subject to the terms and conditions of the GNU General Public
-# License. See the file "COPYING" in the main directory of this archive
-# for more details.
-#
-# Copyright (C) 2002-2004 Silicon Graphics, Inc. All Rights Reserved.
-#
-# Makefile for the sn2 io routines.
-
-ccflags-y := -I $(srctree)/arch/ia64/sn/include
-
-obj-y += pcibr_dma.o pcibr_reg.o \
- pcibr_ate.o pcibr_provider.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001-2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/types.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-
-int pcibr_invalidate_ate; /* by default don't invalidate ATE on free */
-
-/*
- * mark_ate: Mark the ate as either free or inuse.
- */
-static void mark_ate(struct ate_resource *ate_resource, int start, int number,
- u64 value)
-{
- u64 *ate = ate_resource->ate;
- int index;
- int length = 0;
-
- for (index = start; length < number; index++, length++)
- ate[index] = value;
-}
-
-/*
- * find_free_ate: Find the first free ate index starting from the given
- * index for the desired consecutive count.
- */
-static int find_free_ate(struct ate_resource *ate_resource, int start,
- int count)
-{
- u64 *ate = ate_resource->ate;
- int index;
- int start_free;
-
- for (index = start; index < ate_resource->num_ate;) {
- if (!ate[index]) {
- int i;
- int free;
- free = 0;
- start_free = index; /* Found start free ate */
- for (i = start_free; i < ate_resource->num_ate; i++) {
- if (!ate[i]) { /* This is free */
- if (++free == count)
- return start_free;
- } else {
- index = i + 1;
- break;
- }
- }
- if (i >= ate_resource->num_ate)
- return -1;
- } else
- index++; /* Try next ate */
- }
-
- return -1;
-}
-
-/*
- * free_ate_resource: Free the requested number of ATEs.
- */
-static inline void free_ate_resource(struct ate_resource *ate_resource,
- int start)
-{
- mark_ate(ate_resource, start, ate_resource->ate[start], 0);
- if ((ate_resource->lowest_free_index > start) ||
- (ate_resource->lowest_free_index < 0))
- ate_resource->lowest_free_index = start;
-}
-
-/*
- * alloc_ate_resource: Allocate the requested number of ATEs.
- */
-static inline int alloc_ate_resource(struct ate_resource *ate_resource,
- int ate_needed)
-{
- int start_index;
-
- /*
- * Check for ate exhaustion.
- */
- if (ate_resource->lowest_free_index < 0)
- return -1;
-
- /*
- * Find the required number of free consecutive ates.
- */
- start_index =
- find_free_ate(ate_resource, ate_resource->lowest_free_index,
- ate_needed);
- if (start_index >= 0)
- mark_ate(ate_resource, start_index, ate_needed, ate_needed);
-
- ate_resource->lowest_free_index =
- find_free_ate(ate_resource, ate_resource->lowest_free_index, 1);
-
- return start_index;
-}
-
-/*
- * Allocate "count" contiguous Bridge Address Translation Entries
- * on the specified bridge to be used for PCI to XTALK mappings.
- * Indices in rm map range from 1..num_entries. Indices returned
- * to caller range from 0..num_entries-1.
- *
- * Return the start index on success, -1 on failure.
- */
-int pcibr_ate_alloc(struct pcibus_info *pcibus_info, int count)
-{
- int status;
- unsigned long flags;
-
- spin_lock_irqsave(&pcibus_info->pbi_lock, flags);
- status = alloc_ate_resource(&pcibus_info->pbi_int_ate_resource, count);
- spin_unlock_irqrestore(&pcibus_info->pbi_lock, flags);
-
- return status;
-}
-
-/*
- * Setup an Address Translation Entry as specified. Use either the Bridge
- * internal maps or the external map RAM, as appropriate.
- */
-static inline u64 __iomem *pcibr_ate_addr(struct pcibus_info *pcibus_info,
- int ate_index)
-{
- if (ate_index < pcibus_info->pbi_int_ate_size) {
- return pcireg_int_ate_addr(pcibus_info, ate_index);
- }
- panic("pcibr_ate_addr: invalid ate_index 0x%x", ate_index);
-}
-
-/*
- * Update the ate.
- */
-inline void
-ate_write(struct pcibus_info *pcibus_info, int ate_index, int count,
- volatile u64 ate)
-{
- while (count-- > 0) {
- if (ate_index < pcibus_info->pbi_int_ate_size) {
- pcireg_int_ate_set(pcibus_info, ate_index, ate);
- } else {
- panic("ate_write: invalid ate_index 0x%x", ate_index);
- }
- ate_index++;
- ate += IOPGSIZE;
- }
-
- pcireg_tflush_get(pcibus_info); /* wait until Bridge PIO complete */
-}
-
-void pcibr_ate_free(struct pcibus_info *pcibus_info, int index)
-{
-
- volatile u64 ate;
- int count;
- unsigned long flags;
-
- if (pcibr_invalidate_ate) {
- /* For debugging purposes, clear the valid bit in the ATE */
- ate = *pcibr_ate_addr(pcibus_info, index);
- count = pcibus_info->pbi_int_ate_resource.ate[index];
- ate_write(pcibus_info, index, count, (ate & ~PCI32_ATE_V));
- }
-
- spin_lock_irqsave(&pcibus_info->pbi_lock, flags);
- free_ate_resource(&pcibus_info->pbi_int_ate_resource, index);
- spin_unlock_irqrestore(&pcibus_info->pbi_lock, flags);
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001-2005 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/export.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/pic.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/tiocp.h>
-#include "tio.h"
-#include "xtalk/xwidgetdev.h"
-#include "xtalk/hubdev.h"
-
-extern int sn_ioif_inited;
-
-/* =====================================================================
- * DMA MANAGEMENT
- *
- * The Bridge ASIC provides three methods of doing DMA: via a "direct map"
- * register available in 32-bit PCI space (which selects a contiguous 2G
- * address space on some other widget), via "direct" addressing via 64-bit
- * PCI space (all destination information comes from the PCI address,
- * including transfer attributes), and via a "mapped" region that allows
- * a bunch of different small mappings to be established with the PMU.
- *
- * For efficiency, we most prefer to use the 32bit direct mapping facility,
- * since it requires no resource allocations. The advantage of using the
- * PMU over the 64-bit direct is that single-cycle PCI addressing can be
- * used; the advantage of using 64-bit direct over PMU addressing is that
- * we do not have to allocate entries in the PMU.
- */
-
-static dma_addr_t
-pcibr_dmamap_ate32(struct pcidev_info *info,
- u64 paddr, size_t req_size, u64 flags, int dma_flags)
-{
-
- struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
- struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
- pdi_pcibus_info;
- u8 internal_device = (PCI_SLOT(pcidev_info->pdi_host_pcidev_info->
- pdi_linux_pcidev->devfn)) - 1;
- int ate_count;
- int ate_index;
- u64 ate_flags = flags | PCI32_ATE_V;
- u64 ate;
- u64 pci_addr;
- u64 xio_addr;
- u64 offset;
-
- /* PIC in PCI-X mode does not supports 32bit PageMap mode */
- if (IS_PIC_SOFT(pcibus_info) && IS_PCIX(pcibus_info)) {
- return 0;
- }
-
- /* Calculate the number of ATEs needed. */
- if (!(MINIMAL_ATE_FLAG(paddr, req_size))) {
- ate_count = IOPG((IOPGSIZE - 1) /* worst case start offset */
- +req_size /* max mapping bytes */
- - 1) + 1; /* round UP */
- } else { /* assume requested target is page aligned */
- ate_count = IOPG(req_size /* max mapping bytes */
- - 1) + 1; /* round UP */
- }
-
- /* Get the number of ATEs required. */
- ate_index = pcibr_ate_alloc(pcibus_info, ate_count);
- if (ate_index < 0)
- return 0;
-
- /* In PCI-X mode, Prefetch not supported */
- if (IS_PCIX(pcibus_info))
- ate_flags &= ~(PCI32_ATE_PREF);
-
- if (SN_DMA_ADDRTYPE(dma_flags == SN_DMA_ADDR_PHYS))
- xio_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) :
- PHYS_TO_TIODMA(paddr);
- else
- xio_addr = paddr;
-
- offset = IOPGOFF(xio_addr);
- ate = ate_flags | (xio_addr - offset);
-
- /* If PIC, put the targetid in the ATE */
- if (IS_PIC_SOFT(pcibus_info)) {
- ate |= (pcibus_info->pbi_hub_xid << PIC_ATE_TARGETID_SHFT);
- }
-
- /*
- * If we're mapping for MSI, set the MSI bit in the ATE. If it's a
- * TIOCP based pci bus, we also need to set the PIO bit in the ATE.
- */
- if (dma_flags & SN_DMA_MSI) {
- ate |= PCI32_ATE_MSI;
- if (IS_TIOCP_SOFT(pcibus_info))
- ate |= PCI32_ATE_PIO;
- }
-
- ate_write(pcibus_info, ate_index, ate_count, ate);
-
- /*
- * Set up the DMA mapped Address.
- */
- pci_addr = PCI32_MAPPED_BASE + offset + IOPGSIZE * ate_index;
-
- /*
- * If swap was set in device in pcibr_endian_set()
- * we need to turn swapping on.
- */
- if (pcibus_info->pbi_devreg[internal_device] & PCIBR_DEV_SWAP_DIR)
- ATE_SWAP_ON(pci_addr);
-
-
- return pci_addr;
-}
-
-static dma_addr_t
-pcibr_dmatrans_direct64(struct pcidev_info * info, u64 paddr,
- u64 dma_attributes, int dma_flags)
-{
- struct pcibus_info *pcibus_info = (struct pcibus_info *)
- ((info->pdi_host_pcidev_info)->pdi_pcibus_info);
- u64 pci_addr;
-
- /* Translate to Crosstalk View of Physical Address */
- if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
- pci_addr = IS_PIC_SOFT(pcibus_info) ?
- PHYS_TO_DMA(paddr) :
- PHYS_TO_TIODMA(paddr);
- else
- pci_addr = paddr;
- pci_addr |= dma_attributes;
-
- /* Handle Bus mode */
- if (IS_PCIX(pcibus_info))
- pci_addr &= ~PCI64_ATTR_PREF;
-
- /* Handle Bridge Chipset differences */
- if (IS_PIC_SOFT(pcibus_info)) {
- pci_addr |=
- ((u64) pcibus_info->
- pbi_hub_xid << PIC_PCI64_ATTR_TARG_SHFT);
- } else
- pci_addr |= (dma_flags & SN_DMA_MSI) ?
- TIOCP_PCI64_CMDTYPE_MSI :
- TIOCP_PCI64_CMDTYPE_MEM;
-
- /* If PCI mode, func zero uses VCHAN0, every other func uses VCHAN1 */
- if (!IS_PCIX(pcibus_info) && PCI_FUNC(info->pdi_linux_pcidev->devfn))
- pci_addr |= PCI64_ATTR_VIRTUAL;
-
- return pci_addr;
-}
-
-static dma_addr_t
-pcibr_dmatrans_direct32(struct pcidev_info * info,
- u64 paddr, size_t req_size, u64 flags, int dma_flags)
-{
- struct pcidev_info *pcidev_info = info->pdi_host_pcidev_info;
- struct pcibus_info *pcibus_info = (struct pcibus_info *)pcidev_info->
- pdi_pcibus_info;
- u64 xio_addr;
-
- u64 xio_base;
- u64 offset;
- u64 endoff;
-
- if (IS_PCIX(pcibus_info)) {
- return 0;
- }
-
- if (dma_flags & SN_DMA_MSI)
- return 0;
-
- if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
- xio_addr = IS_PIC_SOFT(pcibus_info) ? PHYS_TO_DMA(paddr) :
- PHYS_TO_TIODMA(paddr);
- else
- xio_addr = paddr;
-
- xio_base = pcibus_info->pbi_dir_xbase;
- offset = xio_addr - xio_base;
- endoff = req_size + offset;
- if ((req_size > (1ULL << 31)) || /* Too Big */
- (xio_addr < xio_base) || /* Out of range for mappings */
- (endoff > (1ULL << 31))) { /* Too Big */
- return 0;
- }
-
- return PCI32_DIRECT_BASE | offset;
-}
-
-/*
- * Wrapper routine for freeing DMA maps
- * DMA mappings for Direct 64 and 32 do not have any DMA maps.
- */
-void
-pcibr_dma_unmap(struct pci_dev *hwdev, dma_addr_t dma_handle, int direction)
-{
- struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(hwdev);
- struct pcibus_info *pcibus_info =
- (struct pcibus_info *)pcidev_info->pdi_pcibus_info;
-
- if (IS_PCI32_MAPPED(dma_handle)) {
- int ate_index;
-
- ate_index =
- IOPG((ATE_SWAP_OFF(dma_handle) - PCI32_MAPPED_BASE));
- pcibr_ate_free(pcibus_info, ate_index);
- }
-}
-
-/*
- * On SN systems there is a race condition between a PIO read response and
- * DMA's. In rare cases, the read response may beat the DMA, causing the
- * driver to think that data in memory is complete and meaningful. This code
- * eliminates that race. This routine is called by the PIO read routines
- * after doing the read. For PIC this routine then forces a fake interrupt
- * on another line, which is logically associated with the slot that the PIO
- * is addressed to. It then spins while watching the memory location that
- * the interrupt is targeted to. When the interrupt response arrives, we
- * are sure that the DMA has landed in memory and it is safe for the driver
- * to proceed. For TIOCP use the Device(x) Write Request Buffer Flush
- * Bridge register since it ensures the data has entered the coherence domain,
- * unlike the PIC Device(x) Write Request Buffer Flush register.
- */
-
-void sn_dma_flush(u64 addr)
-{
- nasid_t nasid;
- int is_tio;
- int wid_num;
- int i, j;
- unsigned long flags;
- u64 itte;
- struct hubdev_info *hubinfo;
- struct sn_flush_device_kernel *p;
- struct sn_flush_device_common *common;
- struct sn_flush_nasid_entry *flush_nasid_list;
-
- if (!sn_ioif_inited)
- return;
-
- nasid = NASID_GET(addr);
- if (-1 == nasid_to_cnodeid(nasid))
- return;
-
- hubinfo = (NODEPDA(nasid_to_cnodeid(nasid)))->pdinfo;
-
- BUG_ON(!hubinfo);
-
- flush_nasid_list = &hubinfo->hdi_flush_nasid_list;
- if (flush_nasid_list->widget_p == NULL)
- return;
-
- is_tio = (nasid & 1);
- if (is_tio) {
- int itte_index;
-
- if (TIO_HWIN(addr))
- itte_index = 0;
- else if (TIO_BWIN_WINDOWNUM(addr))
- itte_index = TIO_BWIN_WINDOWNUM(addr);
- else
- itte_index = -1;
-
- if (itte_index >= 0) {
- itte = flush_nasid_list->iio_itte[itte_index];
- if (! TIO_ITTE_VALID(itte))
- return;
- wid_num = TIO_ITTE_WIDGET(itte);
- } else
- wid_num = TIO_SWIN_WIDGETNUM(addr);
- } else {
- if (BWIN_WINDOWNUM(addr)) {
- itte = flush_nasid_list->iio_itte[BWIN_WINDOWNUM(addr)];
- wid_num = IIO_ITTE_WIDGET(itte);
- } else
- wid_num = SWIN_WIDGETNUM(addr);
- }
- if (flush_nasid_list->widget_p[wid_num] == NULL)
- return;
- p = &flush_nasid_list->widget_p[wid_num][0];
-
- /* find a matching BAR */
- for (i = 0; i < DEV_PER_WIDGET; i++,p++) {
- common = p->common;
- for (j = 0; j < PCI_ROM_RESOURCE; j++) {
- if (common->sfdl_bar_list[j].start == 0)
- break;
- if (addr >= common->sfdl_bar_list[j].start
- && addr <= common->sfdl_bar_list[j].end)
- break;
- }
- if (j < PCI_ROM_RESOURCE && common->sfdl_bar_list[j].start != 0)
- break;
- }
-
- /* if no matching BAR, return without doing anything. */
- if (i == DEV_PER_WIDGET)
- return;
-
- /*
- * For TIOCP use the Device(x) Write Request Buffer Flush Bridge
- * register since it ensures the data has entered the coherence
- * domain, unlike PIC.
- */
- if (is_tio) {
- /*
- * Note: devices behind TIOCE should never be matched in the
- * above code, and so the following code is PIC/CP centric.
- * If CE ever needs the sn_dma_flush mechanism, we will have
- * to account for that here and in tioce_bus_fixup().
- */
- u32 tio_id = HUB_L(TIO_IOSPACE_ADDR(nasid, TIO_NODE_ID));
- u32 revnum = XWIDGET_PART_REV_NUM(tio_id);
-
- /* TIOCP BRINGUP WAR (PV907516): Don't write buffer flush reg */
- if ((1 << XWIDGET_PART_REV_NUM_REV(revnum)) & PV907516) {
- return;
- } else {
- pcireg_wrb_flush_get(common->sfdl_pcibus_info,
- (common->sfdl_slot - 1));
- }
- } else {
- spin_lock_irqsave(&p->sfdl_flush_lock, flags);
- *common->sfdl_flush_addr = 0;
-
- /* force an interrupt. */
- *(volatile u32 *)(common->sfdl_force_int_addr) = 1;
-
- /* wait for the interrupt to come back. */
- while (*(common->sfdl_flush_addr) != 0x10f)
- cpu_relax();
-
- /* okay, everything is synched up. */
- spin_unlock_irqrestore(&p->sfdl_flush_lock, flags);
- }
- return;
-}
-
-/*
- * DMA interfaces. Called from pci_dma.c routines.
- */
-
-dma_addr_t
-pcibr_dma_map(struct pci_dev * hwdev, unsigned long phys_addr, size_t size, int dma_flags)
-{
- dma_addr_t dma_handle;
- struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(hwdev);
-
- /* SN cannot support DMA addresses smaller than 32 bits. */
- if (hwdev->dma_mask < 0x7fffffff) {
- return 0;
- }
-
- if (hwdev->dma_mask == ~0UL) {
- /*
- * Handle the most common case: 64 bit cards. This
- * call should always succeed.
- */
-
- dma_handle = pcibr_dmatrans_direct64(pcidev_info, phys_addr,
- PCI64_ATTR_PREF, dma_flags);
- } else {
- /* Handle 32-63 bit cards via direct mapping */
- dma_handle = pcibr_dmatrans_direct32(pcidev_info, phys_addr,
- size, 0, dma_flags);
- if (!dma_handle) {
- /*
- * It is a 32 bit card and we cannot do direct mapping,
- * so we use an ATE.
- */
-
- dma_handle = pcibr_dmamap_ate32(pcidev_info, phys_addr,
- size, PCI32_ATE_PREF,
- dma_flags);
- }
- }
-
- return dma_handle;
-}
-
-dma_addr_t
-pcibr_dma_map_consistent(struct pci_dev * hwdev, unsigned long phys_addr,
- size_t size, int dma_flags)
-{
- dma_addr_t dma_handle;
- struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(hwdev);
-
- if (hwdev->dev.coherent_dma_mask == ~0UL) {
- dma_handle = pcibr_dmatrans_direct64(pcidev_info, phys_addr,
- PCI64_ATTR_BAR, dma_flags);
- } else {
- dma_handle = (dma_addr_t) pcibr_dmamap_ate32(pcidev_info,
- phys_addr, size,
- PCI32_ATE_BAR, dma_flags);
- }
-
- return dma_handle;
-}
-
-EXPORT_SYMBOL(sn_dma_flush);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2001-2004, 2006 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/export.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/geo.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/pic.h>
-#include <asm/sn/sn2/sn_hwperf.h>
-#include "xtalk/xwidgetdev.h"
-#include "xtalk/hubdev.h"
-
-int
-sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp,
- char **ssdt)
-{
- struct ia64_sal_retval ret_stuff;
- u64 busnum;
- u64 segment;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- segment = soft->pbi_buscommon.bs_persist_segment;
- busnum = soft->pbi_buscommon.bs_persist_busnum;
- SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, segment,
- busnum, (u64) device, (u64) resp, (u64)ia64_tpa(ssdt),
- 0, 0);
-
- return (int)ret_stuff.v0;
-}
-
-int
-sal_pcibr_slot_disable(struct pcibus_info *soft, int device, int action,
- void *resp)
-{
- struct ia64_sal_retval ret_stuff;
- u64 busnum;
- u64 segment;
-
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- segment = soft->pbi_buscommon.bs_persist_segment;
- busnum = soft->pbi_buscommon.bs_persist_busnum;
- SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_DISABLE,
- segment, busnum, (u64) device, (u64) action,
- (u64) resp, 0, 0);
-
- return (int)ret_stuff.v0;
-}
-
-static int sal_pcibr_error_interrupt(struct pcibus_info *soft)
-{
- struct ia64_sal_retval ret_stuff;
- u64 busnum;
- int segment;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- segment = soft->pbi_buscommon.bs_persist_segment;
- busnum = soft->pbi_buscommon.bs_persist_busnum;
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
- (u64) segment, (u64) busnum, 0, 0, 0, 0, 0);
-
- return (int)ret_stuff.v0;
-}
-
-u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus)
-{
- long rc;
- u16 uninitialized_var(ioboard); /* GCC be quiet */
- nasid_t nasid = NASID_GET(SN_PCIBUS_BUSSOFT(pci_bus)->bs_base);
-
- rc = ia64_sn_sysctl_ioboard_get(nasid, &ioboard);
- if (rc) {
- printk(KERN_WARNING "ia64_sn_sysctl_ioboard_get failed: %ld\n",
- rc);
- return 0;
- }
-
- return ioboard;
-}
-
-/*
- * PCI Bridge Error interrupt handler. Gets invoked whenever a PCI
- * bridge sends an error interrupt.
- */
-static irqreturn_t
-pcibr_error_intr_handler(int irq, void *arg)
-{
- struct pcibus_info *soft = arg;
-
- if (sal_pcibr_error_interrupt(soft) < 0)
- panic("pcibr_error_intr_handler(): Fatal Bridge Error");
-
- return IRQ_HANDLED;
-}
-
-void *
-pcibr_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
-{
- int nasid, cnode, j;
- struct hubdev_info *hubdev_info;
- struct pcibus_info *soft;
- struct sn_flush_device_kernel *sn_flush_device_kernel;
- struct sn_flush_device_common *common;
-
- if (! IS_PCI_BRIDGE_ASIC(prom_bussoft->bs_asic_type)) {
- return NULL;
- }
-
- /*
- * Allocate kernel bus soft and copy from prom.
- */
-
- soft = kmemdup(prom_bussoft, sizeof(struct pcibus_info), GFP_KERNEL);
- if (!soft) {
- return NULL;
- }
-
- soft->pbi_buscommon.bs_base = (unsigned long)
- ioremap(REGION_OFFSET(soft->pbi_buscommon.bs_base),
- sizeof(struct pic));
-
- spin_lock_init(&soft->pbi_lock);
-
- /*
- * register the bridge's error interrupt handler
- */
- if (request_irq(SGI_PCIASIC_ERROR, pcibr_error_intr_handler,
- IRQF_SHARED, "PCIBR error", (void *)(soft))) {
- printk(KERN_WARNING
- "pcibr cannot allocate interrupt for error handler\n");
- }
- irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq);
- sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
-
- /*
- * Update the Bridge with the "kernel" pagesize
- */
- if (PAGE_SIZE < 16384) {
- pcireg_control_bit_clr(soft, PCIBR_CTRL_PAGE_SIZE);
- } else {
- pcireg_control_bit_set(soft, PCIBR_CTRL_PAGE_SIZE);
- }
-
- nasid = NASID_GET(soft->pbi_buscommon.bs_base);
- cnode = nasid_to_cnodeid(nasid);
- hubdev_info = (struct hubdev_info *)(NODEPDA(cnode)->pdinfo);
-
- if (hubdev_info->hdi_flush_nasid_list.widget_p) {
- sn_flush_device_kernel = hubdev_info->hdi_flush_nasid_list.
- widget_p[(int)soft->pbi_buscommon.bs_xid];
- if (sn_flush_device_kernel) {
- for (j = 0; j < DEV_PER_WIDGET;
- j++, sn_flush_device_kernel++) {
- common = sn_flush_device_kernel->common;
- if (common->sfdl_slot == -1)
- continue;
- if ((common->sfdl_persistent_segment ==
- soft->pbi_buscommon.bs_persist_segment) &&
- (common->sfdl_persistent_busnum ==
- soft->pbi_buscommon.bs_persist_busnum))
- common->sfdl_pcibus_info =
- soft;
- }
- }
- }
-
- /* Setup the PMU ATE map */
- soft->pbi_int_ate_resource.lowest_free_index = 0;
- soft->pbi_int_ate_resource.ate =
- kcalloc(soft->pbi_int_ate_size, sizeof(u64), GFP_KERNEL);
-
- if (!soft->pbi_int_ate_resource.ate) {
- kfree(soft);
- return NULL;
- }
-
- return soft;
-}
-
-void pcibr_force_interrupt(struct sn_irq_info *sn_irq_info)
-{
- struct pcidev_info *pcidev_info;
- struct pcibus_info *pcibus_info;
- int bit = sn_irq_info->irq_int_bit;
-
- if (! sn_irq_info->irq_bridge)
- return;
-
- pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- if (pcidev_info) {
- pcibus_info =
- (struct pcibus_info *)pcidev_info->pdi_host_pcidev_info->
- pdi_pcibus_info;
- pcireg_force_intr_set(pcibus_info, bit);
- }
-}
-
-void pcibr_target_interrupt(struct sn_irq_info *sn_irq_info)
-{
- struct pcidev_info *pcidev_info;
- struct pcibus_info *pcibus_info;
- int bit = sn_irq_info->irq_int_bit;
- u64 xtalk_addr = sn_irq_info->irq_xtalkaddr;
-
- pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- if (pcidev_info) {
- pcibus_info =
- (struct pcibus_info *)pcidev_info->pdi_host_pcidev_info->
- pdi_pcibus_info;
-
- /* Disable the device's IRQ */
- pcireg_intr_enable_bit_clr(pcibus_info, (1 << bit));
-
- /* Change the device's IRQ */
- pcireg_intr_addr_addr_set(pcibus_info, bit, xtalk_addr);
-
- /* Re-enable the device's IRQ */
- pcireg_intr_enable_bit_set(pcibus_info, (1 << bit));
-
- pcibr_force_interrupt(sn_irq_info);
- }
-}
-
-/*
- * Provider entries for PIC/CP
- */
-
-struct sn_pcibus_provider pcibr_provider = {
- .dma_map = pcibr_dma_map,
- .dma_map_consistent = pcibr_dma_map_consistent,
- .dma_unmap = pcibr_dma_unmap,
- .bus_fixup = pcibr_bus_fixup,
- .force_interrupt = pcibr_force_interrupt,
- .target_interrupt = pcibr_target_interrupt
-};
-
-int
-pcibr_init_provider(void)
-{
- sn_pci_provider[PCIIO_ASIC_TYPE_PIC] = &pcibr_provider;
- sn_pci_provider[PCIIO_ASIC_TYPE_TIOCP] = &pcibr_provider;
-
- return 0;
-}
-
-EXPORT_SYMBOL_GPL(sal_pcibr_slot_enable);
-EXPORT_SYMBOL_GPL(sal_pcibr_slot_disable);
-EXPORT_SYMBOL_GPL(sn_ioboard_to_pci_bus);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Silicon Graphics, Inc. All rights reserved.
- */
-
-#include <linux/interrupt.h>
-#include <linux/types.h>
-#include <asm/sn/io.h>
-#include <asm/sn/pcibr_provider.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/pic.h>
-#include <asm/sn/tiocp.h>
-
-union br_ptr {
- struct tiocp tio;
- struct pic pic;
-};
-
-/*
- * Control Register Access -- Read/Write 0000_0020
- */
-void pcireg_control_bit_clr(struct pcibus_info *pcibus_info, u64 bits)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- __sn_clrq_relaxed(&ptr->tio.cp_control, bits);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- __sn_clrq_relaxed(&ptr->pic.p_wid_control, bits);
- break;
- default:
- panic
- ("pcireg_control_bit_clr: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-void pcireg_control_bit_set(struct pcibus_info *pcibus_info, u64 bits)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- __sn_setq_relaxed(&ptr->tio.cp_control, bits);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- __sn_setq_relaxed(&ptr->pic.p_wid_control, bits);
- break;
- default:
- panic
- ("pcireg_control_bit_set: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-/*
- * PCI/PCIX Target Flush Register Access -- Read Only 0000_0050
- */
-u64 pcireg_tflush_get(struct pcibus_info *pcibus_info)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- u64 ret = 0;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- ret = __sn_readq_relaxed(&ptr->tio.cp_tflush);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- ret = __sn_readq_relaxed(&ptr->pic.p_wid_tflush);
- break;
- default:
- panic
- ("pcireg_tflush_get: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-
- /* Read of the Target Flush should always return zero */
- if (ret != 0)
- panic("pcireg_tflush_get:Target Flush failed\n");
-
- return ret;
-}
-
-/*
- * Interrupt Status Register Access -- Read Only 0000_0100
- */
-u64 pcireg_intr_status_get(struct pcibus_info * pcibus_info)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- u64 ret = 0;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- ret = __sn_readq_relaxed(&ptr->tio.cp_int_status);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- ret = __sn_readq_relaxed(&ptr->pic.p_int_status);
- break;
- default:
- panic
- ("pcireg_intr_status_get: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
- return ret;
-}
-
-/*
- * Interrupt Enable Register Access -- Read/Write 0000_0108
- */
-void pcireg_intr_enable_bit_clr(struct pcibus_info *pcibus_info, u64 bits)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- __sn_clrq_relaxed(&ptr->tio.cp_int_enable, bits);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- __sn_clrq_relaxed(&ptr->pic.p_int_enable, bits);
- break;
- default:
- panic
- ("pcireg_intr_enable_bit_clr: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-void pcireg_intr_enable_bit_set(struct pcibus_info *pcibus_info, u64 bits)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- __sn_setq_relaxed(&ptr->tio.cp_int_enable, bits);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- __sn_setq_relaxed(&ptr->pic.p_int_enable, bits);
- break;
- default:
- panic
- ("pcireg_intr_enable_bit_set: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-/*
- * Intr Host Address Register (int_addr) -- Read/Write 0000_0130 - 0000_0168
- */
-void pcireg_intr_addr_addr_set(struct pcibus_info *pcibus_info, int int_n,
- u64 addr)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- __sn_clrq_relaxed(&ptr->tio.cp_int_addr[int_n],
- TIOCP_HOST_INTR_ADDR);
- __sn_setq_relaxed(&ptr->tio.cp_int_addr[int_n],
- (addr & TIOCP_HOST_INTR_ADDR));
- break;
- case PCIBR_BRIDGETYPE_PIC:
- __sn_clrq_relaxed(&ptr->pic.p_int_addr[int_n],
- PIC_HOST_INTR_ADDR);
- __sn_setq_relaxed(&ptr->pic.p_int_addr[int_n],
- (addr & PIC_HOST_INTR_ADDR));
- break;
- default:
- panic
- ("pcireg_intr_addr_addr_get: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-/*
- * Force Interrupt Register Access -- Write Only 0000_01C0 - 0000_01F8
- */
-void pcireg_force_intr_set(struct pcibus_info *pcibus_info, int int_n)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- writeq(1, &ptr->tio.cp_force_pin[int_n]);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- writeq(1, &ptr->pic.p_force_pin[int_n]);
- break;
- default:
- panic
- ("pcireg_force_intr_set: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-/*
- * Device(x) Write Buffer Flush Reg Access -- Read Only 0000_0240 - 0000_0258
- */
-u64 pcireg_wrb_flush_get(struct pcibus_info *pcibus_info, int device)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- u64 ret = 0;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- ret =
- __sn_readq_relaxed(&ptr->tio.cp_wr_req_buf[device]);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- ret =
- __sn_readq_relaxed(&ptr->pic.p_wr_req_buf[device]);
- break;
- default:
- panic("pcireg_wrb_flush_get: unknown bridgetype bridge 0x%p", ptr);
- }
-
- }
- /* Read of the Write Buffer Flush should always return zero */
- return ret;
-}
-
-void pcireg_int_ate_set(struct pcibus_info *pcibus_info, int ate_index,
- u64 val)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- writeq(val, &ptr->tio.cp_int_ate_ram[ate_index]);
- break;
- case PCIBR_BRIDGETYPE_PIC:
- writeq(val, &ptr->pic.p_int_ate_ram[ate_index]);
- break;
- default:
- panic
- ("pcireg_int_ate_set: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
-}
-
-u64 __iomem *pcireg_int_ate_addr(struct pcibus_info *pcibus_info, int ate_index)
-{
- union br_ptr __iomem *ptr = (union br_ptr __iomem *)pcibus_info->pbi_buscommon.bs_base;
- u64 __iomem *ret = NULL;
-
- if (pcibus_info) {
- switch (pcibus_info->pbi_bridge_type) {
- case PCIBR_BRIDGETYPE_TIOCP:
- ret = &ptr->tio.cp_int_ate_ram[ate_index];
- break;
- case PCIBR_BRIDGETYPE_PIC:
- ret = &ptr->pic.p_int_ate_ram[ate_index];
- break;
- default:
- panic
- ("pcireg_int_ate_addr: unknown bridgetype bridge 0x%p",
- ptr);
- }
- }
- return ret;
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/bitmap.h>
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/io.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/tioca_provider.h>
-
-u32 tioca_gart_found;
-EXPORT_SYMBOL(tioca_gart_found); /* used by agp-sgi */
-
-LIST_HEAD(tioca_list);
-EXPORT_SYMBOL(tioca_list); /* used by agp-sgi */
-
-static int tioca_gart_init(struct tioca_kernel *);
-
-/**
- * tioca_gart_init - Initialize SGI TIOCA GART
- * @tioca_common: ptr to common prom/kernel struct identifying the
- *
- * If the indicated tioca has devices present, initialize its associated
- * GART MMR's and kernel memory.
- */
-static int
-tioca_gart_init(struct tioca_kernel *tioca_kern)
-{
- u64 ap_reg;
- u64 offset;
- struct page *tmp;
- struct tioca_common *tioca_common;
- struct tioca __iomem *ca_base;
-
- tioca_common = tioca_kern->ca_common;
- ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
-
- if (list_empty(tioca_kern->ca_devices))
- return 0;
-
- ap_reg = 0;
-
- /*
- * Validate aperature size
- */
-
- switch (CA_APERATURE_SIZE >> 20) {
- case 4:
- ap_reg |= (0x3ff << CA_GART_AP_SIZE_SHFT); /* 4MB */
- break;
- case 8:
- ap_reg |= (0x3fe << CA_GART_AP_SIZE_SHFT); /* 8MB */
- break;
- case 16:
- ap_reg |= (0x3fc << CA_GART_AP_SIZE_SHFT); /* 16MB */
- break;
- case 32:
- ap_reg |= (0x3f8 << CA_GART_AP_SIZE_SHFT); /* 32 MB */
- break;
- case 64:
- ap_reg |= (0x3f0 << CA_GART_AP_SIZE_SHFT); /* 64 MB */
- break;
- case 128:
- ap_reg |= (0x3e0 << CA_GART_AP_SIZE_SHFT); /* 128 MB */
- break;
- case 256:
- ap_reg |= (0x3c0 << CA_GART_AP_SIZE_SHFT); /* 256 MB */
- break;
- case 512:
- ap_reg |= (0x380 << CA_GART_AP_SIZE_SHFT); /* 512 MB */
- break;
- case 1024:
- ap_reg |= (0x300 << CA_GART_AP_SIZE_SHFT); /* 1GB */
- break;
- case 2048:
- ap_reg |= (0x200 << CA_GART_AP_SIZE_SHFT); /* 2GB */
- break;
- case 4096:
- ap_reg |= (0x000 << CA_GART_AP_SIZE_SHFT); /* 4 GB */
- break;
- default:
- printk(KERN_ERR "%s: Invalid CA_APERATURE_SIZE "
- "0x%lx\n", __func__, (ulong) CA_APERATURE_SIZE);
- return -1;
- }
-
- /*
- * Set up other aperature parameters
- */
-
- if (PAGE_SIZE >= 16384) {
- tioca_kern->ca_ap_pagesize = 16384;
- ap_reg |= CA_GART_PAGE_SIZE;
- } else {
- tioca_kern->ca_ap_pagesize = 4096;
- }
-
- tioca_kern->ca_ap_size = CA_APERATURE_SIZE;
- tioca_kern->ca_ap_bus_base = CA_APERATURE_BASE;
- tioca_kern->ca_gart_entries =
- tioca_kern->ca_ap_size / tioca_kern->ca_ap_pagesize;
-
- ap_reg |= (CA_GART_AP_ENB_AGP | CA_GART_AP_ENB_PCI);
- ap_reg |= tioca_kern->ca_ap_bus_base;
-
- /*
- * Allocate and set up the GART
- */
-
- tioca_kern->ca_gart_size = tioca_kern->ca_gart_entries * sizeof(u64);
- tmp =
- alloc_pages_node(tioca_kern->ca_closest_node,
- GFP_KERNEL | __GFP_ZERO,
- get_order(tioca_kern->ca_gart_size));
-
- if (!tmp) {
- printk(KERN_ERR "%s: Could not allocate "
- "%llu bytes (order %d) for GART\n",
- __func__,
- tioca_kern->ca_gart_size,
- get_order(tioca_kern->ca_gart_size));
- return -ENOMEM;
- }
-
- tioca_kern->ca_gart = page_address(tmp);
- tioca_kern->ca_gart_coretalk_addr =
- PHYS_TO_TIODMA(virt_to_phys(tioca_kern->ca_gart));
-
- /*
- * Compute PCI/AGP convenience fields
- */
-
- offset = CA_PCI32_MAPPED_BASE - CA_APERATURE_BASE;
- tioca_kern->ca_pciap_base = CA_PCI32_MAPPED_BASE;
- tioca_kern->ca_pciap_size = CA_PCI32_MAPPED_SIZE;
- tioca_kern->ca_pcigart_start = offset / tioca_kern->ca_ap_pagesize;
- tioca_kern->ca_pcigart_base =
- tioca_kern->ca_gart_coretalk_addr + offset;
- tioca_kern->ca_pcigart =
- &tioca_kern->ca_gart[tioca_kern->ca_pcigart_start];
- tioca_kern->ca_pcigart_entries =
- tioca_kern->ca_pciap_size / tioca_kern->ca_ap_pagesize;
- tioca_kern->ca_pcigart_pagemap =
- kzalloc(tioca_kern->ca_pcigart_entries / 8, GFP_KERNEL);
- if (!tioca_kern->ca_pcigart_pagemap) {
- free_pages((unsigned long)tioca_kern->ca_gart,
- get_order(tioca_kern->ca_gart_size));
- return -1;
- }
-
- offset = CA_AGP_MAPPED_BASE - CA_APERATURE_BASE;
- tioca_kern->ca_gfxap_base = CA_AGP_MAPPED_BASE;
- tioca_kern->ca_gfxap_size = CA_AGP_MAPPED_SIZE;
- tioca_kern->ca_gfxgart_start = offset / tioca_kern->ca_ap_pagesize;
- tioca_kern->ca_gfxgart_base =
- tioca_kern->ca_gart_coretalk_addr + offset;
- tioca_kern->ca_gfxgart =
- &tioca_kern->ca_gart[tioca_kern->ca_gfxgart_start];
- tioca_kern->ca_gfxgart_entries =
- tioca_kern->ca_gfxap_size / tioca_kern->ca_ap_pagesize;
-
- /*
- * various control settings:
- * use agp op-combining
- * use GET semantics to fetch memory
- * participate in coherency domain
- * DISABLE GART PREFETCHING due to hw bug tracked in SGI PV930029
- */
-
- __sn_setq_relaxed(&ca_base->ca_control1,
- CA_AGPDMA_OP_ENB_COMBDELAY); /* PV895469 ? */
- __sn_clrq_relaxed(&ca_base->ca_control2, CA_GART_MEM_PARAM);
- __sn_setq_relaxed(&ca_base->ca_control2,
- (0x2ull << CA_GART_MEM_PARAM_SHFT));
- tioca_kern->ca_gart_iscoherent = 1;
- __sn_clrq_relaxed(&ca_base->ca_control2,
- (CA_GART_WR_PREFETCH_ENB | CA_GART_RD_PREFETCH_ENB));
-
- /*
- * Unmask GART fetch error interrupts. Clear residual errors first.
- */
-
- writeq(CA_GART_FETCH_ERR, &ca_base->ca_int_status_alias);
- writeq(CA_GART_FETCH_ERR, &ca_base->ca_mult_error_alias);
- __sn_clrq_relaxed(&ca_base->ca_int_mask, CA_GART_FETCH_ERR);
-
- /*
- * Program the aperature and gart registers in TIOCA
- */
-
- writeq(ap_reg, &ca_base->ca_gart_aperature);
- writeq(tioca_kern->ca_gart_coretalk_addr|1, &ca_base->ca_gart_ptr_table);
-
- return 0;
-}
-
-/**
- * tioca_fastwrite_enable - enable AGP FW for a tioca and its functions
- * @tioca_kernel: structure representing the CA
- *
- * Given a CA, scan all attached functions making sure they all support
- * FastWrite. If so, enable FastWrite for all functions and the CA itself.
- */
-
-void
-tioca_fastwrite_enable(struct tioca_kernel *tioca_kern)
-{
- int cap_ptr;
- u32 reg;
- struct tioca __iomem *tioca_base;
- struct pci_dev *pdev;
- struct tioca_common *common;
-
- common = tioca_kern->ca_common;
-
- /*
- * Scan all vga controllers on this bus making sure they all
- * support FW. If not, return.
- */
-
- list_for_each_entry(pdev, tioca_kern->ca_devices, bus_list) {
- if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8))
- continue;
-
- cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
- if (!cap_ptr)
- return; /* no AGP CAP means no FW */
-
- pci_read_config_dword(pdev, cap_ptr + PCI_AGP_STATUS, ®);
- if (!(reg & PCI_AGP_STATUS_FW))
- return; /* function doesn't support FW */
- }
-
- /*
- * Set fw for all vga fn's
- */
-
- list_for_each_entry(pdev, tioca_kern->ca_devices, bus_list) {
- if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8))
- continue;
-
- cap_ptr = pci_find_capability(pdev, PCI_CAP_ID_AGP);
- pci_read_config_dword(pdev, cap_ptr + PCI_AGP_COMMAND, ®);
- reg |= PCI_AGP_COMMAND_FW;
- pci_write_config_dword(pdev, cap_ptr + PCI_AGP_COMMAND, reg);
- }
-
- /*
- * Set ca's fw to match
- */
-
- tioca_base = (struct tioca __iomem*)common->ca_common.bs_base;
- __sn_setq_relaxed(&tioca_base->ca_control1, CA_AGP_FW_ENABLE);
-}
-
-EXPORT_SYMBOL(tioca_fastwrite_enable); /* used by agp-sgi */
-
-/**
- * tioca_dma_d64 - create a DMA mapping using 64-bit direct mode
- * @paddr: system physical address
- *
- * Map @paddr into 64-bit CA bus space. No device context is necessary.
- * Bits 53:0 come from the coretalk address. We just need to mask in the
- * following optional bits of the 64-bit pci address:
- *
- * 63:60 - Coretalk Packet Type - 0x1 for Mem Get/Put (coherent)
- * 0x2 for PIO (non-coherent)
- * We will always use 0x1
- * 55:55 - Swap bytes Currently unused
- */
-static u64
-tioca_dma_d64(unsigned long paddr)
-{
- dma_addr_t bus_addr;
-
- bus_addr = PHYS_TO_TIODMA(paddr);
-
- BUG_ON(!bus_addr);
- BUG_ON(bus_addr >> 54);
-
- /* Set upper nibble to Cache Coherent Memory op */
- bus_addr |= (1UL << 60);
-
- return bus_addr;
-}
-
-/**
- * tioca_dma_d48 - create a DMA mapping using 48-bit direct mode
- * @pdev: linux pci_dev representing the function
- * @paddr: system physical address
- *
- * Map @paddr into 64-bit bus space of the CA associated with @pcidev_info.
- *
- * The CA agp 48 bit direct address falls out as follows:
- *
- * When direct mapping AGP addresses, the 48 bit AGP address is
- * constructed as follows:
- *
- * [47:40] - Low 8 bits of the page Node ID extracted from coretalk
- * address [47:40]. The upper 8 node bits are fixed
- * and come from the xxx register bits [5:0]
- * [39:38] - Chiplet ID extracted from coretalk address [39:38]
- * [37:00] - node offset extracted from coretalk address [37:00]
- *
- * Since the node id in general will be non-zero, and the chiplet id
- * will always be non-zero, it follows that the device must support
- * a dma mask of at least 0xffffffffff (40 bits) to target node 0
- * and in general should be 0xffffffffffff (48 bits) to target nodes
- * up to 255. Nodes above 255 need the support of the xxx register,
- * and so a given CA can only directly target nodes in the range
- * xxx - xxx+255.
- */
-static u64
-tioca_dma_d48(struct pci_dev *pdev, u64 paddr)
-{
- struct tioca_common *tioca_common;
- struct tioca __iomem *ca_base;
- u64 ct_addr;
- dma_addr_t bus_addr;
- u32 node_upper;
- u64 agp_dma_extn;
- struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev);
-
- tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info;
- ca_base = (struct tioca __iomem *)tioca_common->ca_common.bs_base;
-
- ct_addr = PHYS_TO_TIODMA(paddr);
- if (!ct_addr)
- return 0;
-
- bus_addr = (dma_addr_t) (ct_addr & 0xffffffffffffUL);
- node_upper = ct_addr >> 48;
-
- if (node_upper > 64) {
- printk(KERN_ERR "%s: coretalk addr 0x%p node id out "
- "of range\n", __func__, (void *)ct_addr);
- return 0;
- }
-
- agp_dma_extn = __sn_readq_relaxed(&ca_base->ca_agp_dma_addr_extn);
- if (node_upper != (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT)) {
- printk(KERN_ERR "%s: coretalk upper node (%u) "
- "mismatch with ca_agp_dma_addr_extn (%llu)\n",
- __func__,
- node_upper, (agp_dma_extn >> CA_AGP_DMA_NODE_ID_SHFT));
- return 0;
- }
-
- return bus_addr;
-}
-
-/**
- * tioca_dma_mapped - create a DMA mapping using a CA GART
- * @pdev: linux pci_dev representing the function
- * @paddr: host physical address to map
- * @req_size: len (bytes) to map
- *
- * Map @paddr into CA address space using the GART mechanism. The mapped
- * dma_addr_t is guaranteed to be contiguous in CA bus space.
- */
-static dma_addr_t
-tioca_dma_mapped(struct pci_dev *pdev, unsigned long paddr, size_t req_size)
-{
- int ps, ps_shift, entry, entries, mapsize;
- u64 xio_addr, end_xio_addr;
- struct tioca_common *tioca_common;
- struct tioca_kernel *tioca_kern;
- dma_addr_t bus_addr = 0;
- struct tioca_dmamap *ca_dmamap;
- void *map;
- unsigned long flags;
- struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev);
-
- tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info;
- tioca_kern = (struct tioca_kernel *)tioca_common->ca_kernel_private;
-
- xio_addr = PHYS_TO_TIODMA(paddr);
- if (!xio_addr)
- return 0;
-
- spin_lock_irqsave(&tioca_kern->ca_lock, flags);
-
- /*
- * allocate a map struct
- */
-
- ca_dmamap = kzalloc(sizeof(struct tioca_dmamap), GFP_ATOMIC);
- if (!ca_dmamap)
- goto map_return;
-
- /*
- * Locate free entries that can hold req_size. Account for
- * unaligned start/length when allocating.
- */
-
- ps = tioca_kern->ca_ap_pagesize; /* will be power of 2 */
- ps_shift = ffs(ps) - 1;
- end_xio_addr = xio_addr + req_size - 1;
-
- entries = (end_xio_addr >> ps_shift) - (xio_addr >> ps_shift) + 1;
-
- map = tioca_kern->ca_pcigart_pagemap;
- mapsize = tioca_kern->ca_pcigart_entries;
-
- entry = bitmap_find_next_zero_area(map, mapsize, 0, entries, 0);
- if (entry >= mapsize) {
- kfree(ca_dmamap);
- goto map_return;
- }
-
- bitmap_set(map, entry, entries);
-
- bus_addr = tioca_kern->ca_pciap_base + (entry * ps);
-
- ca_dmamap->cad_dma_addr = bus_addr;
- ca_dmamap->cad_gart_size = entries;
- ca_dmamap->cad_gart_entry = entry;
- list_add(&ca_dmamap->cad_list, &tioca_kern->ca_dmamaps);
-
- if (xio_addr % ps) {
- tioca_kern->ca_pcigart[entry] = tioca_paddr_to_gart(xio_addr);
- bus_addr += xio_addr & (ps - 1);
- xio_addr &= ~(ps - 1);
- xio_addr += ps;
- entry++;
- }
-
- while (xio_addr < end_xio_addr) {
- tioca_kern->ca_pcigart[entry] = tioca_paddr_to_gart(xio_addr);
- xio_addr += ps;
- entry++;
- }
-
- tioca_tlbflush(tioca_kern);
-
-map_return:
- spin_unlock_irqrestore(&tioca_kern->ca_lock, flags);
- return bus_addr;
-}
-
-/**
- * tioca_dma_unmap - release CA mapping resources
- * @pdev: linux pci_dev representing the function
- * @bus_addr: bus address returned by an earlier tioca_dma_map
- * @dir: mapping direction (unused)
- *
- * Locate mapping resources associated with @bus_addr and release them.
- * For mappings created using the direct modes (64 or 48) there are no
- * resources to release.
- */
-static void
-tioca_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
-{
- int i, entry;
- struct tioca_common *tioca_common;
- struct tioca_kernel *tioca_kern;
- struct tioca_dmamap *map;
- struct pcidev_info *pcidev_info = SN_PCIDEV_INFO(pdev);
- unsigned long flags;
-
- tioca_common = (struct tioca_common *)pcidev_info->pdi_pcibus_info;
- tioca_kern = (struct tioca_kernel *)tioca_common->ca_kernel_private;
-
- /* return straight away if this isn't be a mapped address */
-
- if (bus_addr < tioca_kern->ca_pciap_base ||
- bus_addr >= (tioca_kern->ca_pciap_base + tioca_kern->ca_pciap_size))
- return;
-
- spin_lock_irqsave(&tioca_kern->ca_lock, flags);
-
- list_for_each_entry(map, &tioca_kern->ca_dmamaps, cad_list)
- if (map->cad_dma_addr == bus_addr)
- break;
-
- BUG_ON(map == NULL);
-
- entry = map->cad_gart_entry;
-
- for (i = 0; i < map->cad_gart_size; i++, entry++) {
- clear_bit(entry, tioca_kern->ca_pcigart_pagemap);
- tioca_kern->ca_pcigart[entry] = 0;
- }
- tioca_tlbflush(tioca_kern);
-
- list_del(&map->cad_list);
- spin_unlock_irqrestore(&tioca_kern->ca_lock, flags);
- kfree(map);
-}
-
-/**
- * tioca_dma_map - map pages for PCI DMA
- * @pdev: linux pci_dev representing the function
- * @paddr: host physical address to map
- * @byte_count: bytes to map
- *
- * This is the main wrapper for mapping host physical pages to CA PCI space.
- * The mapping mode used is based on the devices dma_mask. As a last resort
- * use the GART mapped mode.
- */
-static u64
-tioca_dma_map(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags)
-{
- u64 mapaddr;
-
- /*
- * Not supported for now ...
- */
- if (dma_flags & SN_DMA_MSI)
- return 0;
-
- /*
- * If card is 64 or 48 bit addressable, use a direct mapping. 32
- * bit direct is so restrictive w.r.t. where the memory resides that
- * we don't use it even though CA has some support.
- */
-
- if (pdev->dma_mask == ~0UL)
- mapaddr = tioca_dma_d64(paddr);
- else if (pdev->dma_mask == 0xffffffffffffUL)
- mapaddr = tioca_dma_d48(pdev, paddr);
- else
- mapaddr = 0;
-
- /* Last resort ... use PCI portion of CA GART */
-
- if (mapaddr == 0)
- mapaddr = tioca_dma_mapped(pdev, paddr, byte_count);
-
- return mapaddr;
-}
-
-/**
- * tioca_error_intr_handler - SGI TIO CA error interrupt handler
- * @irq: unused
- * @arg: pointer to tioca_common struct for the given CA
- *
- * Handle a CA error interrupt. Simply a wrapper around a SAL call which
- * defers processing to the SGI prom.
- */
-static irqreturn_t
-tioca_error_intr_handler(int irq, void *arg)
-{
- struct tioca_common *soft = arg;
- struct ia64_sal_retval ret_stuff;
- u64 segment;
- u64 busnum;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- segment = soft->ca_common.bs_persist_segment;
- busnum = soft->ca_common.bs_persist_busnum;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
- segment, busnum, 0, 0, 0, 0, 0);
-
- return IRQ_HANDLED;
-}
-
-/**
- * tioca_bus_fixup - perform final PCI fixup for a TIO CA bus
- * @prom_bussoft: Common prom/kernel struct representing the bus
- *
- * Replicates the tioca_common pointed to by @prom_bussoft in kernel
- * space. Allocates and initializes a kernel-only area for a given CA,
- * and sets up an irq for handling CA error interrupts.
- *
- * On successful setup, returns the kernel version of tioca_common back to
- * the caller.
- */
-static void *
-tioca_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
-{
- struct tioca_common *tioca_common;
- struct tioca_kernel *tioca_kern;
- struct pci_bus *bus;
-
- /* sanity check prom rev */
-
- if (is_shub1() && sn_sal_rev() < 0x0406) {
- printk
- (KERN_ERR "%s: SGI prom rev 4.06 or greater required "
- "for tioca support\n", __func__);
- return NULL;
- }
-
- /*
- * Allocate kernel bus soft and copy from prom.
- */
-
- tioca_common = kmemdup(prom_bussoft, sizeof(struct tioca_common),
- GFP_KERNEL);
- if (!tioca_common)
- return NULL;
-
- tioca_common->ca_common.bs_base = (unsigned long)
- ioremap(REGION_OFFSET(tioca_common->ca_common.bs_base),
- sizeof(struct tioca_common));
-
- /* init kernel-private area */
-
- tioca_kern = kzalloc(sizeof(struct tioca_kernel), GFP_KERNEL);
- if (!tioca_kern) {
- kfree(tioca_common);
- return NULL;
- }
-
- tioca_kern->ca_common = tioca_common;
- spin_lock_init(&tioca_kern->ca_lock);
- INIT_LIST_HEAD(&tioca_kern->ca_dmamaps);
- tioca_kern->ca_closest_node =
- nasid_to_cnodeid(tioca_common->ca_closest_nasid);
- tioca_common->ca_kernel_private = (u64) tioca_kern;
-
- bus = pci_find_bus(tioca_common->ca_common.bs_persist_segment,
- tioca_common->ca_common.bs_persist_busnum);
- BUG_ON(!bus);
- tioca_kern->ca_devices = &bus->devices;
-
- /* init GART */
-
- if (tioca_gart_init(tioca_kern) < 0) {
- kfree(tioca_kern);
- kfree(tioca_common);
- return NULL;
- }
-
- tioca_gart_found++;
- list_add(&tioca_kern->ca_list, &tioca_list);
-
- if (request_irq(SGI_TIOCA_ERROR,
- tioca_error_intr_handler,
- IRQF_SHARED, "TIOCA error", (void *)tioca_common))
- printk(KERN_WARNING
- "%s: Unable to get irq %d. "
- "Error interrupts won't be routed for TIOCA bus %d\n",
- __func__, SGI_TIOCA_ERROR,
- (int)tioca_common->ca_common.bs_persist_busnum);
-
- irq_set_handler(SGI_TIOCA_ERROR, handle_level_irq);
- sn_set_err_irq_affinity(SGI_TIOCA_ERROR);
-
- /* Setup locality information */
- controller->node = tioca_kern->ca_closest_node;
- return tioca_common;
-}
-
-static struct sn_pcibus_provider tioca_pci_interfaces = {
- .dma_map = tioca_dma_map,
- .dma_map_consistent = tioca_dma_map,
- .dma_unmap = tioca_dma_unmap,
- .bus_fixup = tioca_bus_fixup,
- .force_interrupt = NULL,
- .target_interrupt = NULL
-};
-
-/**
- * tioca_init_provider - init SN PCI provider ops for TIO CA
- */
-int
-tioca_init_provider(void)
-{
- sn_pci_provider[PCIIO_ASIC_TYPE_TIOCA] = &tioca_pci_interfaces;
- return 0;
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
- */
-
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <asm/sn/sn_sal.h>
-#include <asm/sn/addrs.h>
-#include <asm/sn/io.h>
-#include <asm/sn/pcidev.h>
-#include <asm/sn/pcibus_provider_defs.h>
-#include <asm/sn/tioce_provider.h>
-
-/*
- * 1/26/2006
- *
- * WAR for SGI PV 944642. For revA TIOCE, need to use the following recipe
- * (taken from the above PV) before and after accessing tioce internal MMR's
- * to avoid tioce lockups.
- *
- * The recipe as taken from the PV:
- *
- * if(mmr address < 0x45000) {
- * if(mmr address == 0 or 0x80)
- * mmr wrt or read address 0xc0
- * else if(mmr address == 0x148 or 0x200)
- * mmr wrt or read address 0x28
- * else
- * mmr wrt or read address 0x158
- *
- * do desired mmr access (rd or wrt)
- *
- * if(mmr address == 0x100)
- * mmr wrt or read address 0x38
- * mmr wrt or read address 0xb050
- * } else
- * do desired mmr access
- *
- * According to hw, we can use reads instead of writes to the above address
- *
- * Note this WAR can only to be used for accessing internal MMR's in the
- * TIOCE Coretalk Address Range 0x0 - 0x07ff_ffff. This includes the
- * "Local CE Registers and Memories" and "PCI Compatible Config Space" address
- * spaces from table 2-1 of the "CE Programmer's Reference Overview" document.
- *
- * All registers defined in struct tioce will meet that criteria.
- */
-
-static inline void
-tioce_mmr_war_pre(struct tioce_kernel *kern, void __iomem *mmr_addr)
-{
- u64 mmr_base;
- u64 mmr_offset;
-
- if (kern->ce_common->ce_rev != TIOCE_REV_A)
- return;
-
- mmr_base = kern->ce_common->ce_pcibus.bs_base;
- mmr_offset = (unsigned long)mmr_addr - mmr_base;
-
- if (mmr_offset < 0x45000) {
- u64 mmr_war_offset;
-
- if (mmr_offset == 0 || mmr_offset == 0x80)
- mmr_war_offset = 0xc0;
- else if (mmr_offset == 0x148 || mmr_offset == 0x200)
- mmr_war_offset = 0x28;
- else
- mmr_war_offset = 0x158;
-
- readq_relaxed((void __iomem *)(mmr_base + mmr_war_offset));
- }
-}
-
-static inline void
-tioce_mmr_war_post(struct tioce_kernel *kern, void __iomem *mmr_addr)
-{
- u64 mmr_base;
- u64 mmr_offset;
-
- if (kern->ce_common->ce_rev != TIOCE_REV_A)
- return;
-
- mmr_base = kern->ce_common->ce_pcibus.bs_base;
- mmr_offset = (unsigned long)mmr_addr - mmr_base;
-
- if (mmr_offset < 0x45000) {
- if (mmr_offset == 0x100)
- readq_relaxed((void __iomem *)(mmr_base + 0x38));
- readq_relaxed((void __iomem *)(mmr_base + 0xb050));
- }
-}
-
-/* load mmr contents into a variable */
-#define tioce_mmr_load(kern, mmrp, varp) do {\
- tioce_mmr_war_pre(kern, mmrp); \
- *(varp) = readq_relaxed(mmrp); \
- tioce_mmr_war_post(kern, mmrp); \
-} while (0)
-
-/* store variable contents into mmr */
-#define tioce_mmr_store(kern, mmrp, varp) do {\
- tioce_mmr_war_pre(kern, mmrp); \
- writeq(*varp, mmrp); \
- tioce_mmr_war_post(kern, mmrp); \
-} while (0)
-
-/* store immediate value into mmr */
-#define tioce_mmr_storei(kern, mmrp, val) do {\
- tioce_mmr_war_pre(kern, mmrp); \
- writeq(val, mmrp); \
- tioce_mmr_war_post(kern, mmrp); \
-} while (0)
-
-/* set bits (immediate value) into mmr */
-#define tioce_mmr_seti(kern, mmrp, bits) do {\
- u64 tmp; \
- tioce_mmr_load(kern, mmrp, &tmp); \
- tmp |= (bits); \
- tioce_mmr_store(kern, mmrp, &tmp); \
-} while (0)
-
-/* clear bits (immediate value) into mmr */
-#define tioce_mmr_clri(kern, mmrp, bits) do { \
- u64 tmp; \
- tioce_mmr_load(kern, mmrp, &tmp); \
- tmp &= ~(bits); \
- tioce_mmr_store(kern, mmrp, &tmp); \
-} while (0)
-
-/**
- * Bus address ranges for the 5 flavors of TIOCE DMA
- */
-
-#define TIOCE_D64_MIN 0x8000000000000000UL
-#define TIOCE_D64_MAX 0xffffffffffffffffUL
-#define TIOCE_D64_ADDR(a) ((a) >= TIOCE_D64_MIN)
-
-#define TIOCE_D32_MIN 0x0000000080000000UL
-#define TIOCE_D32_MAX 0x00000000ffffffffUL
-#define TIOCE_D32_ADDR(a) ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX)
-
-#define TIOCE_M32_MIN 0x0000000000000000UL
-#define TIOCE_M32_MAX 0x000000007fffffffUL
-#define TIOCE_M32_ADDR(a) ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX)
-
-#define TIOCE_M40_MIN 0x0000004000000000UL
-#define TIOCE_M40_MAX 0x0000007fffffffffUL
-#define TIOCE_M40_ADDR(a) ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX)
-
-#define TIOCE_M40S_MIN 0x0000008000000000UL
-#define TIOCE_M40S_MAX 0x000000ffffffffffUL
-#define TIOCE_M40S_ADDR(a) ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX)
-
-/*
- * ATE manipulation macros.
- */
-
-#define ATE_PAGESHIFT(ps) (__ffs(ps))
-#define ATE_PAGEMASK(ps) ((ps)-1)
-
-#define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps))
-#define ATE_NPAGES(start, len, pagesize) \
- (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1)
-
-#define ATE_VALID(ate) ((ate) & (1UL << 63))
-#define ATE_MAKE(addr, ps, msi) \
- (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63) | ((msi)?(1UL << 62):0))
-
-/*
- * Flavors of ate-based mapping supported by tioce_alloc_map()
- */
-
-#define TIOCE_ATE_M32 1
-#define TIOCE_ATE_M40 2
-#define TIOCE_ATE_M40S 3
-
-#define KB(x) ((u64)(x) << 10)
-#define MB(x) ((u64)(x) << 20)
-#define GB(x) ((u64)(x) << 30)
-
-/**
- * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode
- * @ct_addr: system coretalk address
- *
- * Map @ct_addr into 64-bit CE bus space. No device context is necessary
- * and no CE mapping are consumed.
- *
- * Bits 53:0 come from the coretalk address. The remaining bits are set as
- * follows:
- *
- * 63 - must be 1 to indicate d64 mode to CE hardware
- * 62 - barrier bit ... controlled with tioce_dma_barrier()
- * 61 - msi bit ... specified through dma_flags
- * 60:54 - reserved, MBZ
- */
-static u64
-tioce_dma_d64(unsigned long ct_addr, int dma_flags)
-{
- u64 bus_addr;
-
- bus_addr = ct_addr | (1UL << 63);
- if (dma_flags & SN_DMA_MSI)
- bus_addr |= (1UL << 61);
-
- return bus_addr;
-}
-
-/**
- * pcidev_to_tioce - return misc ce related pointers given a pci_dev
- * @pci_dev: pci device context
- * @base: ptr to store struct tioce_mmr * for the CE holding this device
- * @kernel: ptr to store struct tioce_kernel * for the CE holding this device
- * @port: ptr to store the CE port number that this device is on
- *
- * Return pointers to various CE-related structures for the CE upstream of
- * @pci_dev.
- */
-static inline void
-pcidev_to_tioce(struct pci_dev *pdev, struct tioce __iomem **base,
- struct tioce_kernel **kernel, int *port)
-{
- struct pcidev_info *pcidev_info;
- struct tioce_common *ce_common;
- struct tioce_kernel *ce_kernel;
-
- pcidev_info = SN_PCIDEV_INFO(pdev);
- ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
- ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private;
-
- if (base)
- *base = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
- if (kernel)
- *kernel = ce_kernel;
-
- /*
- * we use port as a zero-based value internally, even though the
- * documentation is 1-based.
- */
- if (port)
- *port =
- (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1;
-}
-
-/**
- * tioce_alloc_map - Given a coretalk address, map it to pcie bus address
- * space using one of the various ATE-based address modes.
- * @ce_kern: tioce context
- * @type: map mode to use
- * @port: 0-based port that the requesting device is downstream of
- * @ct_addr: the coretalk address to map
- * @len: number of bytes to map
- *
- * Given the addressing type, set up various parameters that define the
- * ATE pool to use. Search for a contiguous block of entries to cover the
- * length, and if enough resources exist, fill in the ATEs and construct a
- * tioce_dmamap struct to track the mapping.
- */
-static u64
-tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port,
- u64 ct_addr, int len, int dma_flags)
-{
- int i;
- int j;
- int first;
- int last;
- int entries;
- int nates;
- u64 pagesize;
- int msi_capable, msi_wanted;
- u64 *ate_shadow;
- u64 __iomem *ate_reg;
- u64 addr;
- struct tioce __iomem *ce_mmr;
- u64 bus_base;
- struct tioce_dmamap *map;
-
- ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
-
- switch (type) {
- case TIOCE_ATE_M32:
- /*
- * The first 64 entries of the ate3240 pool are dedicated to
- * super-page (TIOCE_ATE_M40S) mode.
- */
- first = 64;
- entries = TIOCE_NUM_M3240_ATES - 64;
- ate_shadow = ce_kern->ce_ate3240_shadow;
- ate_reg = ce_mmr->ce_ure_ate3240;
- pagesize = ce_kern->ce_ate3240_pagesize;
- bus_base = TIOCE_M32_MIN;
- msi_capable = 1;
- break;
- case TIOCE_ATE_M40:
- first = 0;
- entries = TIOCE_NUM_M40_ATES;
- ate_shadow = ce_kern->ce_ate40_shadow;
- ate_reg = ce_mmr->ce_ure_ate40;
- pagesize = MB(64);
- bus_base = TIOCE_M40_MIN;
- msi_capable = 0;
- break;
- case TIOCE_ATE_M40S:
- /*
- * ate3240 entries 0-31 are dedicated to port1 super-page
- * mappings. ate3240 entries 32-63 are dedicated to port2.
- */
- first = port * 32;
- entries = 32;
- ate_shadow = ce_kern->ce_ate3240_shadow;
- ate_reg = ce_mmr->ce_ure_ate3240;
- pagesize = GB(16);
- bus_base = TIOCE_M40S_MIN;
- msi_capable = 0;
- break;
- default:
- return 0;
- }
-
- msi_wanted = dma_flags & SN_DMA_MSI;
- if (msi_wanted && !msi_capable)
- return 0;
-
- nates = ATE_NPAGES(ct_addr, len, pagesize);
- if (nates > entries)
- return 0;
-
- last = first + entries - nates;
- for (i = first; i <= last; i++) {
- if (ATE_VALID(ate_shadow[i]))
- continue;
-
- for (j = i; j < i + nates; j++)
- if (ATE_VALID(ate_shadow[j]))
- break;
-
- if (j >= i + nates)
- break;
- }
-
- if (i > last)
- return 0;
-
- map = kzalloc(sizeof(struct tioce_dmamap), GFP_ATOMIC);
- if (!map)
- return 0;
-
- addr = ct_addr;
- for (j = 0; j < nates; j++) {
- u64 ate;
-
- ate = ATE_MAKE(addr, pagesize, msi_wanted);
- ate_shadow[i + j] = ate;
- tioce_mmr_storei(ce_kern, &ate_reg[i + j], ate);
- addr += pagesize;
- }
-
- map->refcnt = 1;
- map->nbytes = nates * pagesize;
- map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize);
- map->pci_start = bus_base + (i * pagesize);
- map->ate_hw = &ate_reg[i];
- map->ate_shadow = &ate_shadow[i];
- map->ate_count = nates;
-
- list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list);
-
- return (map->pci_start + (ct_addr - map->ct_start));
-}
-
-/**
- * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode
- * @pdev: linux pci_dev representing the function
- * @paddr: system physical address
- *
- * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info.
- */
-static u64
-tioce_dma_d32(struct pci_dev *pdev, u64 ct_addr, int dma_flags)
-{
- int dma_ok;
- int port;
- struct tioce __iomem *ce_mmr;
- struct tioce_kernel *ce_kern;
- u64 ct_upper;
- u64 ct_lower;
- dma_addr_t bus_addr;
-
- if (dma_flags & SN_DMA_MSI)
- return 0;
-
- ct_upper = ct_addr & ~0x3fffffffUL;
- ct_lower = ct_addr & 0x3fffffffUL;
-
- pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
-
- if (ce_kern->ce_port[port].dirmap_refcnt == 0) {
- u64 tmp;
-
- ce_kern->ce_port[port].dirmap_shadow = ct_upper;
- tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
- ct_upper);
- tmp = ce_mmr->ce_ure_dir_map[port];
- dma_ok = 1;
- } else
- dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper);
-
- if (dma_ok) {
- ce_kern->ce_port[port].dirmap_refcnt++;
- bus_addr = TIOCE_D32_MIN + ct_lower;
- } else
- bus_addr = 0;
-
- return bus_addr;
-}
-
-/**
- * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude
- * the barrier bit.
- * @bus_addr: bus address to swizzle
- *
- * Given a TIOCE bus address, set the appropriate bit to indicate barrier
- * attributes.
- */
-static u64
-tioce_dma_barrier(u64 bus_addr, int on)
-{
- u64 barrier_bit;
-
- /* barrier not supported in M40/M40S mode */
- if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr))
- return bus_addr;
-
- if (TIOCE_D64_ADDR(bus_addr))
- barrier_bit = (1UL << 62);
- else /* must be m32 or d32 */
- barrier_bit = (1UL << 30);
-
- return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit);
-}
-
-/**
- * tioce_dma_unmap - release CE mapping resources
- * @pdev: linux pci_dev representing the function
- * @bus_addr: bus address returned by an earlier tioce_dma_map
- * @dir: mapping direction (unused)
- *
- * Locate mapping resources associated with @bus_addr and release them.
- * For mappings created using the direct modes there are no resources
- * to release.
- */
-void
-tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir)
-{
- int i;
- int port;
- struct tioce_kernel *ce_kern;
- struct tioce __iomem *ce_mmr;
- unsigned long flags;
-
- bus_addr = tioce_dma_barrier(bus_addr, 0);
- pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port);
-
- /* nothing to do for D64 */
-
- if (TIOCE_D64_ADDR(bus_addr))
- return;
-
- spin_lock_irqsave(&ce_kern->ce_lock, flags);
-
- if (TIOCE_D32_ADDR(bus_addr)) {
- if (--ce_kern->ce_port[port].dirmap_refcnt == 0) {
- ce_kern->ce_port[port].dirmap_shadow = 0;
- tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_dir_map[port],
- 0);
- }
- } else {
- struct tioce_dmamap *map;
-
- list_for_each_entry(map, &ce_kern->ce_dmamap_list,
- ce_dmamap_list) {
- u64 last;
-
- last = map->pci_start + map->nbytes - 1;
- if (bus_addr >= map->pci_start && bus_addr <= last)
- break;
- }
-
- if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) {
- printk(KERN_WARNING
- "%s: %s - no map found for bus_addr 0x%llx\n",
- __func__, pci_name(pdev), bus_addr);
- } else if (--map->refcnt == 0) {
- for (i = 0; i < map->ate_count; i++) {
- map->ate_shadow[i] = 0;
- tioce_mmr_storei(ce_kern, &map->ate_hw[i], 0);
- }
-
- list_del(&map->ce_dmamap_list);
- kfree(map);
- }
- }
-
- spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
-}
-
-/**
- * tioce_do_dma_map - map pages for PCI DMA
- * @pdev: linux pci_dev representing the function
- * @paddr: host physical address to map
- * @byte_count: bytes to map
- *
- * This is the main wrapper for mapping host physical pages to CE PCI space.
- * The mapping mode used is based on the device's dma_mask.
- */
-static u64
-tioce_do_dma_map(struct pci_dev *pdev, u64 paddr, size_t byte_count,
- int barrier, int dma_flags)
-{
- unsigned long flags;
- u64 ct_addr;
- u64 mapaddr = 0;
- struct tioce_kernel *ce_kern;
- struct tioce_dmamap *map;
- int port;
- u64 dma_mask;
-
- dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask;
-
- /* cards must be able to address at least 31 bits */
- if (dma_mask < 0x7fffffffUL)
- return 0;
-
- if (SN_DMA_ADDRTYPE(dma_flags) == SN_DMA_ADDR_PHYS)
- ct_addr = PHYS_TO_TIODMA(paddr);
- else
- ct_addr = paddr;
-
- /*
- * If the device can generate 64 bit addresses, create a D64 map.
- */
- if (dma_mask == ~0UL) {
- mapaddr = tioce_dma_d64(ct_addr, dma_flags);
- if (mapaddr)
- goto dma_map_done;
- }
-
- pcidev_to_tioce(pdev, NULL, &ce_kern, &port);
-
- spin_lock_irqsave(&ce_kern->ce_lock, flags);
-
- /*
- * D64 didn't work ... See if we have an existing map that covers
- * this address range. Must account for devices dma_mask here since
- * an existing map might have been done in a mode using more pci
- * address bits than this device can support.
- */
- list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) {
- u64 last;
-
- last = map->ct_start + map->nbytes - 1;
- if (ct_addr >= map->ct_start &&
- ct_addr + byte_count - 1 <= last &&
- map->pci_start <= dma_mask) {
- map->refcnt++;
- mapaddr = map->pci_start + (ct_addr - map->ct_start);
- break;
- }
- }
-
- /*
- * If we don't have a map yet, and the card can generate 40
- * bit addresses, try the M40/M40S modes. Note these modes do not
- * support a barrier bit, so if we need a consistent map these
- * won't work.
- */
- if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) {
- /*
- * We have two options for 40-bit mappings: 16GB "super" ATEs
- * and 64MB "regular" ATEs. We'll try both if needed for a
- * given mapping but which one we try first depends on the
- * size. For requests >64MB, prefer to use a super page with
- * regular as the fallback. Otherwise, try in the reverse order.
- */
-
- if (byte_count > MB(64)) {
- mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
- port, ct_addr, byte_count,
- dma_flags);
- if (!mapaddr)
- mapaddr =
- tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
- ct_addr, byte_count,
- dma_flags);
- } else {
- mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1,
- ct_addr, byte_count,
- dma_flags);
- if (!mapaddr)
- mapaddr =
- tioce_alloc_map(ce_kern, TIOCE_ATE_M40S,
- port, ct_addr, byte_count,
- dma_flags);
- }
- }
-
- /*
- * 32-bit direct is the next mode to try
- */
- if (!mapaddr && dma_mask >= 0xffffffffUL)
- mapaddr = tioce_dma_d32(pdev, ct_addr, dma_flags);
-
- /*
- * Last resort, try 32-bit ATE-based map.
- */
- if (!mapaddr)
- mapaddr =
- tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr,
- byte_count, dma_flags);
-
- spin_unlock_irqrestore(&ce_kern->ce_lock, flags);
-
-dma_map_done:
- if (mapaddr && barrier)
- mapaddr = tioce_dma_barrier(mapaddr, 1);
-
- return mapaddr;
-}
-
-/**
- * tioce_dma - standard pci dma map interface
- * @pdev: pci device requesting the map
- * @paddr: system physical address to map into pci space
- * @byte_count: # bytes to map
- *
- * Simply call tioce_do_dma_map() to create a map with the barrier bit clear
- * in the address.
- */
-static u64
-tioce_dma(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags)
-{
- return tioce_do_dma_map(pdev, paddr, byte_count, 0, dma_flags);
-}
-
-/**
- * tioce_dma_consistent - consistent pci dma map interface
- * @pdev: pci device requesting the map
- * @paddr: system physical address to map into pci space
- * @byte_count: # bytes to map
- *
- * Simply call tioce_do_dma_map() to create a map with the barrier bit set
- * in the address.
- */
-static u64
-tioce_dma_consistent(struct pci_dev *pdev, unsigned long paddr, size_t byte_count, int dma_flags)
-{
- return tioce_do_dma_map(pdev, paddr, byte_count, 1, dma_flags);
-}
-
-/**
- * tioce_error_intr_handler - SGI TIO CE error interrupt handler
- * @irq: unused
- * @arg: pointer to tioce_common struct for the given CE
- *
- * Handle a CE error interrupt. Simply a wrapper around a SAL call which
- * defers processing to the SGI prom.
- */
-static irqreturn_t
-tioce_error_intr_handler(int irq, void *arg)
-{
- struct tioce_common *soft = arg;
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT,
- soft->ce_pcibus.bs_persist_segment,
- soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0);
-
- if (ret_stuff.v0)
- panic("tioce_error_intr_handler: Fatal TIOCE error");
-
- return IRQ_HANDLED;
-}
-
-/**
- * tioce_reserve_m32 - reserve M32 ATEs for the indicated address range
- * @tioce_kernel: TIOCE context to reserve ATEs for
- * @base: starting bus address to reserve
- * @limit: last bus address to reserve
- *
- * If base/limit falls within the range of bus space mapped through the
- * M32 space, reserve the resources corresponding to the range.
- */
-static void
-tioce_reserve_m32(struct tioce_kernel *ce_kern, u64 base, u64 limit)
-{
- int ate_index, last_ate, ps;
- struct tioce __iomem *ce_mmr;
-
- ce_mmr = (struct tioce __iomem *)ce_kern->ce_common->ce_pcibus.bs_base;
- ps = ce_kern->ce_ate3240_pagesize;
- ate_index = ATE_PAGE(base, ps);
- last_ate = ate_index + ATE_NPAGES(base, limit-base+1, ps) - 1;
-
- if (ate_index < 64)
- ate_index = 64;
-
- if (last_ate >= TIOCE_NUM_M3240_ATES)
- last_ate = TIOCE_NUM_M3240_ATES - 1;
-
- while (ate_index <= last_ate) {
- u64 ate;
-
- ate = ATE_MAKE(0xdeadbeef, ps, 0);
- ce_kern->ce_ate3240_shadow[ate_index] = ate;
- tioce_mmr_storei(ce_kern, &ce_mmr->ce_ure_ate3240[ate_index],
- ate);
- ate_index++;
- }
-}
-
-/**
- * tioce_kern_init - init kernel structures related to a given TIOCE
- * @tioce_common: ptr to a cached tioce_common struct that originated in prom
- */
-static struct tioce_kernel *
-tioce_kern_init(struct tioce_common *tioce_common)
-{
- int i;
- int ps;
- int dev;
- u32 tmp;
- unsigned int seg, bus;
- struct tioce __iomem *tioce_mmr;
- struct tioce_kernel *tioce_kern;
-
- tioce_kern = kzalloc(sizeof(struct tioce_kernel), GFP_KERNEL);
- if (!tioce_kern) {
- return NULL;
- }
-
- tioce_kern->ce_common = tioce_common;
- spin_lock_init(&tioce_kern->ce_lock);
- INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list);
- tioce_common->ce_kernel_private = (u64) tioce_kern;
-
- /*
- * Determine the secondary bus number of the port2 logical PPB.
- * This is used to decide whether a given pci device resides on
- * port1 or port2. Note: We don't have enough plumbing set up
- * here to use pci_read_config_xxx() so use raw_pci_read().
- */
-
- seg = tioce_common->ce_pcibus.bs_persist_segment;
- bus = tioce_common->ce_pcibus.bs_persist_busnum;
-
- raw_pci_read(seg, bus, PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1,&tmp);
- tioce_kern->ce_port1_secondary = (u8) tmp;
-
- /*
- * Set PMU pagesize to the largest size available, and zero out
- * the ATEs.
- */
-
- tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
- tioce_mmr_clri(tioce_kern, &tioce_mmr->ce_ure_page_map,
- CE_URE_PAGESIZE_MASK);
- tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_ure_page_map,
- CE_URE_256K_PAGESIZE);
- ps = tioce_kern->ce_ate3240_pagesize = KB(256);
-
- for (i = 0; i < TIOCE_NUM_M40_ATES; i++) {
- tioce_kern->ce_ate40_shadow[i] = 0;
- tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate40[i], 0);
- }
-
- for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) {
- tioce_kern->ce_ate3240_shadow[i] = 0;
- tioce_mmr_storei(tioce_kern, &tioce_mmr->ce_ure_ate3240[i], 0);
- }
-
- /*
- * Reserve ATEs corresponding to reserved address ranges. These
- * include:
- *
- * Memory space covered by each PPB mem base/limit register
- * Memory space covered by each PPB prefetch base/limit register
- *
- * These bus ranges are for pio (downstream) traffic only, and so
- * cannot be used for DMA.
- */
-
- for (dev = 1; dev <= 2; dev++) {
- u64 base, limit;
-
- /* mem base/limit */
-
- raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
- PCI_MEMORY_BASE, 2, &tmp);
- base = (u64)tmp << 16;
-
- raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
- PCI_MEMORY_LIMIT, 2, &tmp);
- limit = (u64)tmp << 16;
- limit |= 0xfffffUL;
-
- if (base < limit)
- tioce_reserve_m32(tioce_kern, base, limit);
-
- /*
- * prefetch mem base/limit. The tioce ppb's have 64-bit
- * decoders, so read the upper portions w/o checking the
- * attributes.
- */
-
- raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
- PCI_PREF_MEMORY_BASE, 2, &tmp);
- base = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
-
- raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
- PCI_PREF_BASE_UPPER32, 4, &tmp);
- base |= (u64)tmp << 32;
-
- raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
- PCI_PREF_MEMORY_LIMIT, 2, &tmp);
-
- limit = ((u64)tmp & PCI_PREF_RANGE_MASK) << 16;
- limit |= 0xfffffUL;
-
- raw_pci_read(seg, bus, PCI_DEVFN(dev, 0),
- PCI_PREF_LIMIT_UPPER32, 4, &tmp);
- limit |= (u64)tmp << 32;
-
- if ((base < limit) && TIOCE_M32_ADDR(base))
- tioce_reserve_m32(tioce_kern, base, limit);
- }
-
- return tioce_kern;
-}
-
-/**
- * tioce_force_interrupt - implement altix force_interrupt() backend for CE
- * @sn_irq_info: sn asic irq that we need an interrupt generated for
- *
- * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to
- * force a secondary interrupt to be generated. This is to work around an
- * asic issue where there is a small window of opportunity for a legacy device
- * interrupt to be lost.
- */
-static void
-tioce_force_interrupt(struct sn_irq_info *sn_irq_info)
-{
- struct pcidev_info *pcidev_info;
- struct tioce_common *ce_common;
- struct tioce_kernel *ce_kern;
- struct tioce __iomem *ce_mmr;
- u64 force_int_val;
-
- if (!sn_irq_info->irq_bridge)
- return;
-
- if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE)
- return;
-
- pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- if (!pcidev_info)
- return;
-
- ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
- ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
- ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
-
- /*
- * TIOCE Rev A workaround (PV 945826), force an interrupt by writing
- * the TIO_INTx register directly (1/26/2006)
- */
- if (ce_common->ce_rev == TIOCE_REV_A) {
- u64 int_bit_mask = (1ULL << sn_irq_info->irq_int_bit);
- u64 status;
-
- tioce_mmr_load(ce_kern, &ce_mmr->ce_adm_int_status, &status);
- if (status & int_bit_mask) {
- u64 force_irq = (1 << 8) | sn_irq_info->irq_irq;
- u64 ctalk = sn_irq_info->irq_xtalkaddr;
- u64 nasid, offset;
-
- nasid = (ctalk & CTALK_NASID_MASK) >> CTALK_NASID_SHFT;
- offset = (ctalk & CTALK_NODE_OFFSET);
- HUB_S(TIO_IOSPACE_ADDR(nasid, offset), force_irq);
- }
-
- return;
- }
-
- /*
- * irq_int_bit is originally set up by prom, and holds the interrupt
- * bit shift (not mask) as defined by the bit definitions in the
- * ce_adm_int mmr. These shifts are not the same for the
- * ce_adm_force_int register, so do an explicit mapping here to make
- * things clearer.
- */
-
- switch (sn_irq_info->irq_int_bit) {
- case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT;
- break;
- case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT:
- force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT;
- break;
- default:
- return;
- }
- tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_force_int, force_int_val);
-}
-
-/**
- * tioce_target_interrupt - implement set_irq_affinity for tioce resident
- * functions. Note: only applies to line interrupts, not MSI's.
- *
- * @sn_irq_info: SN IRQ context
- *
- * Given an sn_irq_info, set the associated CE device's interrupt destination
- * register. Since the interrupt destination registers are on a per-ce-slot
- * basis, this will retarget line interrupts for all functions downstream of
- * the slot.
- */
-static void
-tioce_target_interrupt(struct sn_irq_info *sn_irq_info)
-{
- struct pcidev_info *pcidev_info;
- struct tioce_common *ce_common;
- struct tioce_kernel *ce_kern;
- struct tioce __iomem *ce_mmr;
- int bit;
- u64 vector;
-
- pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo;
- if (!pcidev_info)
- return;
-
- ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info;
- ce_mmr = (struct tioce __iomem *)ce_common->ce_pcibus.bs_base;
- ce_kern = (struct tioce_kernel *)ce_common->ce_kernel_private;
-
- bit = sn_irq_info->irq_int_bit;
-
- tioce_mmr_seti(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
- vector = (u64)sn_irq_info->irq_irq << INTR_VECTOR_SHFT;
- vector |= sn_irq_info->irq_xtalkaddr;
- tioce_mmr_storei(ce_kern, &ce_mmr->ce_adm_int_dest[bit], vector);
- tioce_mmr_clri(ce_kern, &ce_mmr->ce_adm_int_mask, (1UL << bit));
-
- tioce_force_interrupt(sn_irq_info);
-}
-
-/**
- * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus
- * @prom_bussoft: Common prom/kernel struct representing the bus
- *
- * Replicates the tioce_common pointed to by @prom_bussoft in kernel
- * space. Allocates and initializes a kernel-only area for a given CE,
- * and sets up an irq for handling CE error interrupts.
- *
- * On successful setup, returns the kernel version of tioce_common back to
- * the caller.
- */
-static void *
-tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller)
-{
- struct tioce_common *tioce_common;
- struct tioce_kernel *tioce_kern;
- struct tioce __iomem *tioce_mmr;
-
- /*
- * Allocate kernel bus soft and copy from prom.
- */
-
- tioce_common = kzalloc(sizeof(struct tioce_common), GFP_KERNEL);
- if (!tioce_common)
- return NULL;
-
- memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common));
- tioce_common->ce_pcibus.bs_base = (unsigned long)
- ioremap(REGION_OFFSET(tioce_common->ce_pcibus.bs_base),
- sizeof(struct tioce_common));
-
- tioce_kern = tioce_kern_init(tioce_common);
- if (tioce_kern == NULL) {
- kfree(tioce_common);
- return NULL;
- }
-
- /*
- * Clear out any transient errors before registering the error
- * interrupt handler.
- */
-
- tioce_mmr = (struct tioce __iomem *)tioce_common->ce_pcibus.bs_base;
- tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_int_status_alias, ~0ULL);
- tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_adm_error_summary_alias,
- ~0ULL);
- tioce_mmr_seti(tioce_kern, &tioce_mmr->ce_dre_comp_err_addr, 0ULL);
-
- if (request_irq(SGI_PCIASIC_ERROR,
- tioce_error_intr_handler,
- IRQF_SHARED, "TIOCE error", (void *)tioce_common))
- printk(KERN_WARNING
- "%s: Unable to get irq %d. "
- "Error interrupts won't be routed for "
- "TIOCE bus %04x:%02x\n",
- __func__, SGI_PCIASIC_ERROR,
- tioce_common->ce_pcibus.bs_persist_segment,
- tioce_common->ce_pcibus.bs_persist_busnum);
-
- irq_set_handler(SGI_PCIASIC_ERROR, handle_level_irq);
- sn_set_err_irq_affinity(SGI_PCIASIC_ERROR);
- return tioce_common;
-}
-
-static struct sn_pcibus_provider tioce_pci_interfaces = {
- .dma_map = tioce_dma,
- .dma_map_consistent = tioce_dma_consistent,
- .dma_unmap = tioce_dma_unmap,
- .bus_fixup = tioce_bus_fixup,
- .force_interrupt = tioce_force_interrupt,
- .target_interrupt = tioce_target_interrupt
-};
-
-/**
- * tioce_init_provider - init SN PCI provider ops for TIO CE
- */
-int
-tioce_init_provider(void)
-{
- sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces;
- return 0;
-}
DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info);
EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info);
-#ifdef CONFIG_IA64_SGI_UV
int sn_prom_type;
long sn_coherency_id;
EXPORT_SYMBOL_GPL(sn_coherency_id);
-#endif
struct redir_addr {
unsigned long redirect;
bool "NUMA support"
depends on NUMA
depends on (X86 || IA64 || ARM64)
- default y if IA64_GENERIC || IA64_SGI_SN2 || ARM64
+ default y if IA64_GENERIC || ARM64
config ACPI_CUSTOM_DSDT_FILE
string "Custom DSDT Table file to include"
projects / linux.git / commitdiff