staging: rtl8188eu: add spaces around algebric and boolean operators

This patch fixes checkpatch.pl warnings about preferring spaces around
algebric and boolean operators.

Signed-off-by: Aastha Gupta <aastha.gupta4104@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
index 03e5382acc36681708a3fb53acede7730cecf048..71e2b817e20a995f41c3de1605daabd07f77e9b2 100644 (file)
--- a/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
+++ b/drivers/staging/rtl8188eu/include/rtl8188e_spec.h
@@ -123,9 +123,9 @@
 #define REG_FWISR                      0x0134
 #define REG_PKTBUF_DBG_CTRL            0x0140
 #define REG_PKTBUF_DBG_ADDR            (REG_PKTBUF_DBG_CTRL)
-#define REG_RXPKTBUF_DBG               (REG_PKTBUF_DBG_CTRL+2)
-#define REG_TXPKTBUF_DBG               (REG_PKTBUF_DBG_CTRL+3)
-#define REG_RXPKTBUF_CTRL              (REG_PKTBUF_DBG_CTRL+2)
+#define REG_RXPKTBUF_DBG               (REG_PKTBUF_DBG_CTRL + 2)
+#define REG_TXPKTBUF_DBG               (REG_PKTBUF_DBG_CTRL + 3)
+#define REG_RXPKTBUF_CTRL              (REG_PKTBUF_DBG_CTRL + 2)
 #define REG_PKTBUF_DBG_DATA_L          0x0144
 #define REG_PKTBUF_DBG_DATA_H          0x0148
 
@@ -461,12 +461,12 @@
 /*  GPIO pins input value */
 #define        GPIO_IN                         REG_GPIO_PIN_CTRL
 /*  GPIO pins output value */
-#define        GPIO_OUT                        (REG_GPIO_PIN_CTRL+1)
+#define        GPIO_OUT                        (REG_GPIO_PIN_CTRL + 1)
 /*  GPIO pins output enable when a bit is set to "1"; otherwise,
  *  input is configured.
  */
-#define        GPIO_IO_SEL                     (REG_GPIO_PIN_CTRL+2)
-#define        GPIO_MOD                        (REG_GPIO_PIN_CTRL+3)
+#define        GPIO_IO_SEL                     (REG_GPIO_PIN_CTRL + 2)
+#define        GPIO_MOD                        (REG_GPIO_PIN_CTRL + 3)
 
 /* 8723/8188E Host System Interrupt Mask Register (offset 0x58, 32 byte) */
 #define        HSIMR_GPIO12_0_INT_EN           BIT(0)
@@ -809,7 +809,7 @@ So the following defines for 92C is not entire!!!!!!
 /* 2 EFUSE_TEST (For RTL8723 partially) */
 #define EF_TRPT                                BIT(7)
 /*  00: Wifi Efuse, 01: BT Efuse0, 10: BT Efuse1, 11: BT Efuse2 */
-#define EF_CELL_SEL                    (BIT(8)|BIT(9))
+#define EF_CELL_SEL                    (BIT(8) | BIT(9))
 #define LDOE25_EN                      BIT(31)
 #define EFUSE_SEL(x)                   (((x) & 0x3) << 8)
 #define EFUSE_SEL_MASK                 0x300
@@ -846,7 +846,7 @@ So the following defines for 92C is not entire!!!!!!
 #define BD_MAC2                                BIT(9)
 #define BD_MAC1                                BIT(10)
 #define IC_MACPHY_MODE                 BIT(11)
-#define CHIP_VER                       (BIT(12)|BIT(13)|BIT(14)|BIT(15))
+#define CHIP_VER                       (BIT(12) | BIT(13) | BIT(14) | BIT(15))
 #define BT_FUNC                                BIT(16)
 #define VENDOR_ID                      BIT(19)
 #define PAD_HWPD_IDN                   BIT(22)
@@ -860,9 +860,9 @@ So the following defines for 92C is not entire!!!!!!
 #define CHIP_VER_RTL_SHIFT             12
 
 /* 2REG_GPIO_OUTSTS (For RTL8723 only) */
-#define        EFS_HCI_SEL                     (BIT(0)|BIT(1))
-#define        PAD_HCI_SEL                     (BIT(2)|BIT(3))
-#define        HCI_SEL                         (BIT(4)|BIT(5))
+#define        EFS_HCI_SEL                     (BIT(0) | BIT(1))
+#define        PAD_HCI_SEL                     (BIT(2) | BIT(3))
+#define        HCI_SEL                         (BIT(4) | BIT(5))
 #define        PKG_SEL_HCI                     BIT(6)
 #define        FEN_GPS                         BIT(7)
 #define        FEN_BT                          BIT(8)
@@ -879,7 +879,7 @@ So the following defines for 92C is not entire!!!!!!
 #define        UPHY_SUSB                       BIT(21)
 #define        PCI_SUSEN                       BIT(22)
 #define        USB_SUSEN                       BIT(23)
-#define        RF_RL_ID                        (BIT(31)|BIT(30)|BIT(29)|BIT(28))
+#define        RF_RL_ID                        (BIT(31) | BIT(30) | BIT(29) | BIT(28))
 
 /* 2SYS_CFG */
 #define RTL_ID                         BIT(23) /*  TestChip ID, 1:Test(RLE); 0:MP(RL) */
@@ -942,12 +942,12 @@ So the following defines for 92C is not entire!!!!!!
 #define HQSEL_HIQ                      BIT(5)
 
 /*  For normal driver, 0x10C */
-#define _TXDMA_HIQ_MAP(x)              (((x)&0x3) << 14)
-#define _TXDMA_MGQ_MAP(x)              (((x)&0x3) << 12)
-#define _TXDMA_BKQ_MAP(x)              (((x)&0x3) << 10)
-#define _TXDMA_BEQ_MAP(x)              (((x)&0x3) << 8)
-#define _TXDMA_VIQ_MAP(x)              (((x)&0x3) << 6)
-#define _TXDMA_VOQ_MAP(x)              (((x)&0x3) << 4)
+#define _TXDMA_HIQ_MAP(x)              (((x) & 0x3) << 14)
+#define _TXDMA_MGQ_MAP(x)              (((x) & 0x3) << 12)
+#define _TXDMA_BKQ_MAP(x)              (((x) & 0x3) << 10)
+#define _TXDMA_BEQ_MAP(x)              (((x) & 0x3) << 8)
+#define _TXDMA_VIQ_MAP(x)              (((x) & 0x3) << 6)
+#define _TXDMA_VOQ_MAP(x)              (((x) & 0x3) << 4)
 
 #define QUEUE_LOW                      1
 #define QUEUE_NORMAL                   2