ARM: dts: omap3-igep0020-common: remove unneded unit names

This patch fixes the following DTC warnings for omap3-igep0020.dtb
and omap3-igep0020-rev-f.dtb:

"encoder@0 has a unit name, but no reg property"
"endpoint@0 has a unit name, but no reg property"
"connector@0 has a unit name, but no reg property"

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap3-igep0020-common.dtsi b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
index d6f839cab6499acc72cd5b93733aa967defe9d09..6af81549ff81729dad87943b5c4d2d98a9efbcad 100644 (file)
--- a/arch/arm/boot/dts/omap3-igep0020-common.dtsi
+++ b/arch/arm/boot/dts/omap3-igep0020-common.dtsi
@@ -60,7 +60,7 @@ hsusb1_phy: hsusb1_phy {
                vcc-supply = <&hsusb1_power>;
        };
 
-       tfp410: encoder@0 {
+       tfp410: encoder {
                compatible = "ti,tfp410";
                powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
 
@@ -71,7 +71,7 @@ ports {
                        port@0 {
                                reg = <0>;
 
-                               tfp410_in: endpoint@0 {
+                               tfp410_in: endpoint {
                                        remote-endpoint = <&dpi_out>;
                                };
                        };
@@ -79,14 +79,14 @@ tfp410_in: endpoint@0 {
                        port@1 {
                                reg = <1>;
 
-                               tfp410_out: endpoint@0 {
+                               tfp410_out: endpoint {
                                        remote-endpoint = <&dvi_connector_in>;
                                };
                        };
                };
        };
 
-       dvi0: connector@0 {
+       dvi0: connector {
                compatible = "dvi-connector";
                label = "dvi";