dt-bindings: mailbox: imx-mu: add generic MU channel support

Each MU has four pairs of rx/tx data register with four rx/tx interrupts
which can also be used as a separate channel.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
index 90e4905dfc691b4923f584747a69d80efe0c3e11..f3cf77eb5ab41c3ae67b633af2abe1ac68645c35 100644 (file)
--- a/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
+++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.txt
@@ -18,11 +18,31 @@ Messaging Unit Device Node:
 Required properties:
 -------------------
 - compatible : should be "fsl,<chip>-mu", the supported chips include
-               imx8qxp, imx8qm.
+               imx6sx, imx7s, imx8qxp, imx8qm.
+               The "fsl,imx6sx-mu" compatible is seen as generic and should
+               be included together with SoC specific compatible.
 - reg :                Should contain the registers location and length
 - interrupts : Interrupt number. The interrupt specifier format depends
                on the interrupt controller parent.
-- #mbox-cells:  Must be 0. Number of cells in a mailbox
+- #mbox-cells:  Must be 2.
+                         <&phandle type channel>
+                           phandle   : Label name of controller
+                           type      : Channel type
+                           channel   : Channel number
+
+               This MU support 4 type of unidirectional channels, each type
+               has 4 channels. A total of 16 channels. Following types are
+               supported:
+               0 - TX channel with 32bit transmit register and IRQ transmit
+               acknowledgment support.
+               1 - RX channel with 32bit receive register and IRQ support
+               2 - TX doorbell channel. Without own register and no ACK support.
+               3 - RX doorbell channel.
+
+Optional properties:
+-------------------
+- clocks :     phandle to the input clock.
+- fsl,mu-side-b : Should be set for side B MU.
 
 Examples:
 --------
@@ -30,5 +50,5 @@ lsio_mu0: mailbox@5d1b0000 {
        compatible = "fsl,imx8qxp-mu";
        reg = <0x0 0x5d1b0000 0x0 0x10000>;
        interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-       #mbox-cells = <0>;
+       #mbox-cells = <2>;
 };