ARM: dts: STiH415-pinctrl: update gpio-cells to 2

This patch allows to use second parameter to the gpio
specifier, which is used to specify whether the gpio is
active high or low.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>

diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index 3791ad95dbaff9a35321dfa326c7af17e20d370b..bd028ce98b61d8f5d04af069eddd55fcdb23c2ac 100644 (file)
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -54,7 +54,7 @@ pin-controller-sbc {
 
                        pio0: gpio@fe610000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0 0x100>;
@@ -62,7 +62,7 @@ pio0: gpio@fe610000 {
                        };
                        pio1: gpio@fe611000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x1000 0x100>;
@@ -70,7 +70,7 @@ pio1: gpio@fe611000 {
                        };
                        pio2: gpio@fe612000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x2000 0x100>;
@@ -78,7 +78,7 @@ pio2: gpio@fe612000 {
                        };
                        pio3: gpio@fe613000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x3000 0x100>;
@@ -86,7 +86,7 @@ pio3: gpio@fe613000 {
                        };
                        pio4: gpio@fe614000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x4000 0x100>;
@@ -208,7 +208,7 @@ pin-controller-front {
 
                        pio5: gpio@fee00000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0 0x100>;
@@ -216,7 +216,7 @@ pio5: gpio@fee00000 {
                        };
                        pio6: gpio@fee01000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x1000 0x100>;
@@ -224,7 +224,7 @@ pio6: gpio@fee01000 {
                        };
                        pio7: gpio@fee02000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x2000 0x100>;
@@ -232,7 +232,7 @@ pio7: gpio@fee02000 {
                        };
                        pio8: gpio@fee03000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x3000 0x100>;
@@ -240,7 +240,7 @@ pio8: gpio@fee03000 {
                        };
                        pio9: gpio@fee04000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x4000 0x100>;
@@ -248,7 +248,7 @@ pio9: gpio@fee04000 {
                        };
                        pio10: gpio@fee05000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x5000 0x100>;
@@ -256,7 +256,7 @@ pio10: gpio@fee05000 {
                        };
                        pio11: gpio@fee06000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x6000 0x100>;
@@ -264,7 +264,7 @@ pio11: gpio@fee06000 {
                        };
                        pio12: gpio@fee07000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x7000 0x100>;
@@ -303,7 +303,7 @@ pin-controller-rear {
 
                        pio13: gpio@fe820000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0 0x100>;
@@ -311,7 +311,7 @@ pio13: gpio@fe820000 {
                        };
                        pio14: gpio@fe821000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x1000 0x100>;
@@ -319,7 +319,7 @@ pio14: gpio@fe821000 {
                        };
                        pio15: gpio@fe822000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x2000 0x100>;
@@ -327,7 +327,7 @@ pio15: gpio@fe822000 {
                        };
                        pio16: gpio@fe823000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x3000 0x100>;
@@ -335,7 +335,7 @@ pio16: gpio@fe823000 {
                        };
                        pio17: gpio@fe824000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x4000 0x100>;
@@ -343,7 +343,7 @@ pio17: gpio@fe824000 {
                        };
                        pio18: gpio@fe825000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x5000 0x100>;
@@ -465,7 +465,7 @@ pin-controller-left {
 
                        pio100: gpio@fd6b0000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0 0x100>;
@@ -473,7 +473,7 @@ pio100: gpio@fd6b0000 {
                        };
                        pio101: gpio@fd6b1000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x1000 0x100>;
@@ -481,7 +481,7 @@ pio101: gpio@fd6b1000 {
                        };
                        pio102: gpio@fd6b2000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x2000 0x100>;
@@ -502,7 +502,7 @@ pin-controller-right {
 
                        pio103: gpio@fd330000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0 0x100>;
@@ -510,7 +510,7 @@ pio103: gpio@fd330000 {
                        };
                        pio104: gpio@fd331000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x1000 0x100>;
@@ -518,7 +518,7 @@ pio104: gpio@fd331000 {
                        };
                        pio105: gpio@fd332000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x2000 0x100>;
@@ -526,7 +526,7 @@ pio105: gpio@fd332000 {
                        };
                        pio106: gpio@fd333000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x3000 0x100>;
@@ -534,7 +534,7 @@ pio106: gpio@fd333000 {
                        };
                        pio107: gpio@fd334000 {
                                gpio-controller;
-                               #gpio-cells     = <1>;
+                               #gpio-cells     = <2>;
                                interrupt-controller;
                                #interrupt-cells = <2>;
                                reg             = <0x4000 0x100>;