misc: remove redundant 'default n' from Kconfig-s

'default n' is the default value for any bool or tristate Kconfig
setting so there is no need to write it explicitly.

Also since commit f467c5640c29 ("kconfig: only write '# CONFIG_FOO
is not set' for visible symbols") the Kconfig behavior is the same
regardless of 'default n' being present or not:

    ...
    One side effect of (and the main motivation for) this change is making
    the following two definitions behave exactly the same:

        config FOO
                bool

        config FOO
                bool
                default n

    With this change, neither of these will generate a
    '# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
    That might make it clearer to people that a bare 'default n' is
    redundant.
    ...

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 6a0365b2332caa71a2393a0d376f359579eb6a87..3fa4adeaf8a2f278fa97b72cc1055678ec40f24e 100644 (file)
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -8,7 +8,6 @@ config SENSORS_LIS3LV02D
        tristate
        depends on INPUT
        select INPUT_POLLDEV
-       default n
 
 config AD525X_DPOT
        tristate "Analog Devices Digital Potentiometers"
@@ -61,7 +60,6 @@ config ATMEL_TCLIB
 
 config DUMMY_IRQ
        tristate "Dummy IRQ handler"
-       default n
        ---help---
          This module accepts a single 'irq' parameter, which it should register for.
          The sole purpose of this module is to help with debugging of systems on
@@ -117,7 +115,6 @@ config PHANTOM
 config INTEL_MID_PTI
        tristate "Parallel Trace Interface for MIPI P1149.7 cJTAG standard"
        depends on PCI && TTY && (X86_INTEL_MID || COMPILE_TEST)
-       default n
        help
          The PTI (Parallel Trace Interface) driver directs
          trace data routed from various parts in the system out
@@ -193,7 +190,6 @@ config ATMEL_SSC
 
 config ENCLOSURE_SERVICES
        tristate "Enclosure Services"
-       default n
        help
          Provides support for intelligent enclosures (bays which
          contain storage devices).  You also need either a host
@@ -217,7 +213,6 @@ config SGI_XP
 config CS5535_MFGPT
        tristate "CS5535/CS5536 Geode Multi-Function General Purpose Timer (MFGPT) support"
        depends on MFD_CS5535
-       default n
        help
          This driver provides access to MFGPT functionality for other
          drivers that need timers.  MFGPTs are available in the CS5535 and
@@ -250,7 +245,6 @@ config CS5535_CLOCK_EVENT_SRC
 config HP_ILO
        tristate "Channel interface driver for the HP iLO processor"
        depends on PCI
-       default n
        help
          The channel interface driver allows applications to communicate
          with iLO management processors present on HP ProLiant servers.
@@ -285,7 +279,6 @@ config QCOM_FASTRPC
 config SGI_GRU
        tristate "SGI GRU driver"
        depends on X86_UV && SMP
-       default n
        select MMU_NOTIFIER
        ---help---
        The GRU is a hardware resource located in the system chipset. The GRU
@@ -300,7 +293,6 @@ config SGI_GRU
 config SGI_GRU_DEBUG
        bool  "SGI GRU driver debug"
        depends on SGI_GRU
-       default n
        ---help---
        This option enables additional debugging code for the SGI GRU driver.
        If you are unsure, say N.
@@ -358,7 +350,6 @@ config SENSORS_BH1770
 config SENSORS_APDS990X
         tristate "APDS990X combined als and proximity sensors"
         depends on I2C
-        default n
         ---help---
           Say Y here if you want to build a driver for Avago APDS990x
           combined ambient light and proximity sensor chip.
@@ -386,7 +377,6 @@ config DS1682
 config SPEAR13XX_PCIE_GADGET
        bool "PCIe gadget support for SPEAr13XX platform"
        depends on ARCH_SPEAR13XX && BROKEN
-       default n
        help
         This option enables gadget support for PCIe controller. If
         board file defines any controller as PCIe endpoint then a sysfs

diff --git a/drivers/misc/altera-stapl/Kconfig b/drivers/misc/altera-stapl/Kconfig
index 8a828fe41fadb1691c8a8f96ff972119b54cc9f6..24915e776d9b9f8375c9d029456e7184fd033c22 100644 (file)
--- a/drivers/misc/altera-stapl/Kconfig
+++ b/drivers/misc/altera-stapl/Kconfig
@@ -4,6 +4,5 @@ comment "Altera FPGA firmware download module (requires I2C)"
 config ALTERA_STAPL
        tristate "Altera FPGA firmware download module"
        depends on I2C
-       default n
        help
          An Altera FPGA module. Say Y when you want to support this tool.

diff --git a/drivers/misc/c2port/Kconfig b/drivers/misc/c2port/Kconfig
index 0dd690e61d3ce28b8e6638e58c41a38f1b285137..9c47537898502caa81f81b1780db50e631683e1f 100644 (file)
--- a/drivers/misc/c2port/Kconfig
+++ b/drivers/misc/c2port/Kconfig
@@ -4,7 +4,6 @@
 
 menuconfig C2PORT
        tristate "Silicon Labs C2 port support"
-       default n
        help
          This option enables support for Silicon Labs C2 port used to
          program Silicon micro controller chips (and other 8051 compatible).
@@ -23,7 +22,6 @@ if C2PORT
 config C2PORT_DURAMAR_2150
        tristate "C2 port support for Eurotech's Duramar 2150"
        depends on X86
-       default n
        help
          This option enables C2 support for the Eurotech's Duramar 2150
          on board micro controller.

diff --git a/drivers/misc/cb710/Kconfig b/drivers/misc/cb710/Kconfig
index 22429b8b1068e334e3640513f90ea2869ecdc068..2015a3e5c6c16bf594ea918b99a33373c88a0141 100644 (file)
--- a/drivers/misc/cb710/Kconfig
+++ b/drivers/misc/cb710/Kconfig
@@ -14,7 +14,6 @@ config CB710_CORE
 config CB710_DEBUG
        bool "Enable driver debugging"
        depends on CB710_CORE != n
-       default n
        help
          This is an option for use by developers; most people should
          say N here.  This adds a lot of debugging output to dmesg.

diff --git a/drivers/misc/cxl/Kconfig b/drivers/misc/cxl/Kconfig
index 3ce933707828cb45487e1ddd3928fe444ef73a37..838fc161bac9115bf434e30723e97b9644ba5226 100644 (file)
--- a/drivers/misc/cxl/Kconfig
+++ b/drivers/misc/cxl/Kconfig
@@ -4,16 +4,13 @@
 
 config CXL_BASE
        bool
-       default n
        select PPC_COPRO_BASE
 
 config CXL_AFU_DRIVER_OPS
        bool
-       default n
 
 config CXL_LIB
        bool
-       default n
 
 config CXL
        tristate "Support for IBM Coherent Accelerators (CXL)"

diff --git a/drivers/misc/echo/Kconfig b/drivers/misc/echo/Kconfig
index f1d41ea9cd48f164675cc30a0b2b0471537e6bb1..004233587137df7a3003545b35ebc79fd9ab5b6c 100644 (file)
--- a/drivers/misc/echo/Kconfig
+++ b/drivers/misc/echo/Kconfig
@@ -1,6 +1,5 @@
 config ECHO
        tristate "Line Echo Canceller support"
-       default n
        ---help---
          This driver provides line echo cancelling support for mISDN and
          Zaptel drivers.

diff --git a/drivers/misc/genwqe/Kconfig b/drivers/misc/genwqe/Kconfig
index 4c0a033cbfdbc1b06b38555838fc7d9b5e97fdfe..e128080733558910a957653c2484f4ce32773d82 100644 (file)
--- a/drivers/misc/genwqe/Kconfig
+++ b/drivers/misc/genwqe/Kconfig
@@ -6,7 +6,6 @@ menuconfig GENWQE
        tristate "GenWQE PCIe Accelerator"
        depends on PCI && 64BIT
        select CRC_ITU_T
-       default n
        help
          Enables PCIe card driver for IBM GenWQE accelerators.
          The user-space interface is described in

diff --git a/drivers/misc/lis3lv02d/Kconfig b/drivers/misc/lis3lv02d/Kconfig
index 8f474e6fc7b47f5829b52bbe90fffc3ba06c96cc..92222bafd346611e53e5fee827c2080317a0d98e 100644 (file)
--- a/drivers/misc/lis3lv02d/Kconfig
+++ b/drivers/misc/lis3lv02d/Kconfig
@@ -6,7 +6,6 @@ config SENSORS_LIS3_SPI
        tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)"
        depends on !ACPI && SPI_MASTER && INPUT
        select SENSORS_LIS3LV02D
-       default n
        help
          This driver provides support for the LIS3LV02Dx accelerometer connected
          via SPI. The accelerometer data is readable via
@@ -23,7 +22,6 @@ config SENSORS_LIS3_I2C
        tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)"
        depends on I2C && INPUT
        select SENSORS_LIS3LV02D
-       default n
        help
          This driver provides support for the LIS3LV02Dx accelerometer connected
          via I2C. The accelerometer data is readable via

diff --git a/drivers/misc/ocxl/Kconfig b/drivers/misc/ocxl/Kconfig
index 4bbdb0d3c8ee7ff84fb140bb2cf0d7bda99b8164..84ec15fb745633bd99ada57febb68773050bd32f 100644 (file)
--- a/drivers/misc/ocxl/Kconfig
+++ b/drivers/misc/ocxl/Kconfig
@@ -4,7 +4,6 @@
 
 config OCXL_BASE
        bool
-       default n
        select PPC_COPRO_BASE
 
 config OCXL