format-patch documentation: Fix formatting

Format git commands and options consistently using back quotes
(i.e. a fixed font in the resulting HTML document).

Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>

diff --git a/Documentation/diff-options.txt b/Documentation/diff-options.txt
index a03f1a793ca2099b749c10f9286d0ebec816e727..9398329706e64d6f0de6d209f88d33738aad7ad4 100644 (file)
--- a/Documentation/diff-options.txt
+++ b/Documentation/diff-options.txt
@@ -29,7 +29,7 @@ endif::git-format-patch[]
        Generate diffs with <n> lines of context instead of
        the usual three.
 ifndef::git-format-patch[]
-       Implies "-p".
+       Implies `-p`.
 endif::git-format-patch[]
 
 ifndef::git-format-patch[]
@@ -40,7 +40,7 @@ endif::git-format-patch[]
 
 ifndef::git-format-patch[]
 --patch-with-raw::
-       Synonym for "-p --raw".
+       Synonym for `-p --raw`.
 endif::git-format-patch[]
 
 --patience::
@@ -48,19 +48,19 @@ endif::git-format-patch[]
 
 --stat[=width[,name-width]]::
        Generate a diffstat.  You can override the default
-       output width for 80-column terminal by "--stat=width".
+       output width for 80-column terminal by `--stat=width`.
        The width of the filename part can be controlled by
        giving another width to it separated by a comma.
 
 --numstat::
-       Similar to \--stat, but shows number of added and
+       Similar to `\--stat`, but shows number of added and
        deleted lines in decimal notation and pathname without
        abbreviation, to make it more machine friendly.  For
        binary files, outputs two `-` instead of saying
        `0 0`.
 
 --shortstat::
-       Output only the last line of the --stat format containing total
+       Output only the last line of the `--stat` format containing total
        number of modified files, as well as number of added and deleted
        lines.
 
@@ -68,11 +68,11 @@ endif::git-format-patch[]
        Output the distribution of relative amount of changes (number of lines added or
        removed) for each sub-directory. Directories with changes below
        a cut-off percent (3% by default) are not shown. The cut-off percent
-       can be set with "--dirstat=limit". Changes in a child directory is not
-       counted for the parent directory, unless "--cumulative" is used.
+       can be set with `--dirstat=limit`. Changes in a child directory is not
+       counted for the parent directory, unless `--cumulative` is used.
 
 --dirstat-by-file[=limit]::
-       Same as --dirstat, but counts changed files instead of lines.
+       Same as `--dirstat`, but counts changed files instead of lines.
 
 --summary::
        Output a condensed summary of extended header information
@@ -80,14 +80,14 @@ endif::git-format-patch[]
 
 ifndef::git-format-patch[]
 --patch-with-stat::
-       Synonym for "-p --stat".
+       Synonym for `-p --stat`.
 endif::git-format-patch[]
 
 ifndef::git-format-patch[]
 -z::
-       NUL-line termination on output.  This affects the --raw
+       NUL-line termination on output.  This affects the `--raw`
        output field terminator.  Also output from commands such
-       as "git-log" will be delimited with NUL between commits.
+       as `git-log` will be delimited with NUL between commits.
 
 --name-only::
        Show only names of changed files.
@@ -139,16 +139,16 @@ endif::git-format-patch[]
        line when generating patch format output.
 
 --binary::
-       In addition to --full-index, output "binary diff" that
-       can be applied with "git apply".
+       In addition to `--full-index`, output a binary diff that
+       can be applied with `git-apply`.
 
 --abbrev[=<n>]::
        Instead of showing the full 40-byte hexadecimal object
        name in diff-raw format output and diff-tree header
        lines, show only a partial prefix.  This is
-       independent of --full-index option above, which controls
+       independent of the `--full-index` option above, which controls
        the diff-patch output format.  Non default number of
-       digits can be specified with --abbrev=<n>.
+       digits can be specified with `--abbrev=<n>`.
 
 -B::
        Break complete rewrite changes into pairs of delete and create.
@@ -183,7 +183,7 @@ endif::git-format-patch[]
        `-C` option has the same effect.
 
 -l<num>::
-       -M and -C options require O(n^2) processing time where n
+       The `-M` and `-C` options require O(n^2) processing time where n
        is the number of potential rename/copy targets.  This
        option prevents rename/copy detection from running if
        the number of rename/copy targets exceeds the specified
@@ -197,7 +197,7 @@ ifndef::git-format-patch[]
        linkgit:gitdiffcore[7] for more details.
 
 --pickaxe-all::
-       When -S finds a change, show all the changes in that
+       When `-S` finds a change, show all the changes in that
        changeset, not just the files that contain the change
        in <string>.
 
@@ -254,7 +254,7 @@ ifndef::git-format-patch[]
        0 means no differences.
 
 --quiet::
-       Disable all output of the program. Implies --exit-code.
+       Disable all output of the program. Implies `--exit-code`.
 endif::git-format-patch[]
 
 --ext-diff::

diff --git a/Documentation/git-format-patch.txt b/Documentation/git-format-patch.txt
index 687e66759817bc2f349e8a5a89aa2c6731237b23..f1fd0df08ae3067f8f5b41797e5575d465a859af 100644 (file)
--- a/Documentation/git-format-patch.txt
+++ b/Documentation/git-format-patch.txt
@@ -43,28 +43,28 @@ There are two ways to specify which commits to operate on.
 
 The first rule takes precedence in the case of a single <commit>.  To
 apply the second rule, i.e., format everything since the beginning of
-history up until <commit>, use the '\--root' option: "git format-patch
-\--root <commit>".  If you want to format only <commit> itself, you
-can do this with "git format-patch -1 <commit>".
+history up until <commit>, use the '\--root' option: `git format-patch
+\--root <commit>`.  If you want to format only <commit> itself, you
+can do this with `git format-patch -1 <commit>`.
 
 By default, each output file is numbered sequentially from 1, and uses the
 first line of the commit message (massaged for pathname safety) as
-the filename. With the --numbered-files option, the output file names
+the filename. With the `--numbered-files` option, the output file names
 will only be numbers, without the first line of the commit appended.
 The names of the output files are printed to standard
-output, unless the --stdout option is specified.
+output, unless the `--stdout` option is specified.
 
-If -o is specified, output files are created in <dir>.  Otherwise
+If `-o` is specified, output files are created in <dir>.  Otherwise
 they are created in the current working directory.
 
 By default, the subject of a single patch is "[PATCH] First Line" and
 the subject when multiple patches are output is "[PATCH n/m] First
-Line". To force 1/1 to be added for a single patch, use -n.  To omit
-patch numbers from the subject, use -N
+Line". To force 1/1 to be added for a single patch, use `-n`.  To omit
+patch numbers from the subject, use `-N`.
 
-If given --thread, 'git-format-patch' will generate In-Reply-To and
-References headers to make the second and subsequent patch mails appear
-as replies to the first mail; this also generates a Message-Id header to
+If given `--thread`, `git-format-patch` will generate `In-Reply-To` and
+`References` headers to make the second and subsequent patch mails appear
+as replies to the first mail; this also generates a `Message-Id` header to
 reference.
 
 OPTIONS
@@ -112,7 +112,7 @@ include::diff-options.txt[]
 --attach[=<boundary>]::
        Create multipart/mixed attachment, the first part of
        which is the commit message and the patch itself in the
-       second part, with "Content-Disposition: attachment".
+       second part, with `Content-Disposition: attachment`.
 
 --no-attach::
        Disable the creation of an attachment, overriding the
@@ -121,13 +121,13 @@ include::diff-options.txt[]
 --inline[=<boundary>]::
        Create multipart/mixed attachment, the first part of
        which is the commit message and the patch itself in the
-       second part, with "Content-Disposition: inline".
+       second part, with `Content-Disposition: inline`.
 
 --thread[=<style>]::
 --no-thread::
-       Controls addition of In-Reply-To and References headers to
+       Controls addition of `In-Reply-To` and `References` headers to
        make the second and subsequent mails appear as replies to the
-       first.  Also controls generation of the Message-Id header to
+       first.  Also controls generation of the `Message-Id` header to
        reference.
 +
 The optional <style> argument can be either `shallow` or `deep`.
@@ -136,16 +136,16 @@ series, where the head is chosen from the cover letter, the
 `\--in-reply-to`, and the first patch mail, in this order.  'deep'
 threading makes every mail a reply to the previous one.
 +
-The default is --no-thread, unless the 'format.thread' configuration
-is set.  If --thread is specified without a style, it defaults to the
+The default is `--no-thread`, unless the 'format.thread' configuration
+is set.  If `--thread` is specified without a style, it defaults to the
 style specified by 'format.thread' if any, or else `shallow`.
 +
 Beware that the default for 'git send-email' is to thread emails
-itself.  If you want 'git format-patch' to take care of hreading, you
-will want to ensure that threading is disabled for 'git send-email'.
+itself.  If you want `git format-patch` to take care of threading, you
+will want to ensure that threading is disabled for `git send-email`.
 
 --in-reply-to=Message-Id::
-       Make the first mail (or all the mails with --no-thread) appear as a
+       Make the first mail (or all the mails with `--no-thread`) appear as a
        reply to the given Message-Id, which avoids breaking threads to
        provide a new patch series.
 
@@ -160,16 +160,16 @@ will want to ensure that threading is disabled for 'git send-email'.
        Instead of the standard '[PATCH]' prefix in the subject
        line, instead use '[<Subject-Prefix>]'. This
        allows for useful naming of a patch series, and can be
-       combined with the --numbered option.
+       combined with the `--numbered` option.
 
 --cc=<email>::
-       Add a "Cc:" header to the email headers. This is in addition
+       Add a `Cc:` header to the email headers. This is in addition
        to any configured headers, and may be used multiple times.
 
 --add-header=<header>::
        Add an arbitrary header to the email headers.  This is in addition
        to any configured headers, and may be used multiple times.
-       For example, --add-header="Organization: git-foo"
+       For example, `--add-header="Organization: git-foo"`
 
 --cover-letter::
        In addition to the patches, generate a cover letter file