ARM: BCM5301X: Add DT for Luxul XWC-1000

Luxul XWC-1000 is a controller device based on BCM4708 SoC. The only
unusual thing in its DTS file is "ubi" partition on NAND flash.

Signed-off-by: Dan Haab <dhaab@luxul.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 91bd5bd628576d6da17a10aa87afb52232087d06..ff4a5ae8c2d632d9619875ce921484230562218d 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -57,6 +57,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
 dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
        bcm4708-buffalo-wzr-1750dhp.dtb \
+       bcm4708-luxul-xwc-1000.dtb \
        bcm4708-netgear-r6250.dtb \
        bcm4708-netgear-r6300-v2.dtb \
        bcm47081-asus-rt-n18u.dtb \

diff --git a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
new file mode 100644 (file)
index 0000000..946c728
--- /dev/null
+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts
@@ -0,0 +1,60 @@
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Luxul XWC-1000
+ *
+ * Copyright 2014 Luxul Inc.
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+       compatible = "luxul,xwc-1000", "brcm,bcm4708";
+       model = "Luxul XWC-1000 (BCM4708)";
+
+       chosen {
+               bootargs = "console=ttyS0,115200";
+       };
+
+       memory {
+               reg = <0x00000000 0x08000000>;
+       };
+
+       axi@18000000 {
+               nand@28000 {
+                       reg = <0x00028000 0x1000>;
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       partition@0 {
+                               label = "ubi";
+                               reg = <0x00000000 0x08000000>;
+                       };
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+
+               status {
+                       label = "bcm53xx:green:status";
+                       gpios = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
+                       linux,default-trigger = "timer";
+               };
+       };
+
+       gpio-keys {
+               compatible = "gpio-keys";
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               restart {
+                       label = "Reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+               };
+       };
+};