ARM: dts: imx6sll-evk: correct lcd regulator GPIO pin

On i.MX6SLL EVK board, lcd regulator is controlled
by GPIO4 IO03 using MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 pin,
NOT MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08, correct it.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index cc5cf5e666fd983d243ed226a6452eb4c0627087..41e87e6269260ca7fdd49769a29f58dec8af0d1c 100644 (file)
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -74,7 +74,7 @@ reg_lcd: regulator-lcd {
                pinctrl-names = "default";
                pinctrl-0 = <&pinctrl_reg_lcd>;
                regulator-name = "lcd-pwr";
-               gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+               gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
                enable-active-high;
        };
 
@@ -289,7 +289,7 @@ MX6SLL_PAD_KEY_COL5__GPIO4_IO02 0x17059
 
        pinctrl_reg_lcd: reglcdgrp {
                fsl,pins = <
-                       MX6SLL_PAD_ECSPI1_SCLK__GPIO4_IO08 0x17059
+                       MX6SLL_PAD_KEY_ROW5__GPIO4_IO03 0x17059
                >;
        };