#include <linux/bcd.h>
#include <linux/rtc.h>
#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
/*
* Information for this driver was pulled from the following datasheets.
#define PCF85063_REG_SC 0x04 /* datetime */
#define PCF85063_REG_SC_OS 0x80
-static int pcf85063_stop_clock(struct i2c_client *client, u8 *ctrl1)
-{
- int rc;
- u8 reg;
-
- rc = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
- if (rc < 0) {
- dev_err(&client->dev, "Failing to stop the clock\n");
- return -EIO;
- }
-
- /* stop the clock */
- reg = rc | PCF85063_REG_CTRL1_STOP;
-
- rc = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, reg);
- if (rc < 0) {
- dev_err(&client->dev, "Failing to stop the clock\n");
- return -EIO;
- }
-
- *ctrl1 = reg;
-
- return 0;
-}
-
-static int pcf85063_start_clock(struct i2c_client *client, u8 ctrl1)
-{
- int rc;
-
- /* start the clock */
- ctrl1 &= ~PCF85063_REG_CTRL1_STOP;
-
- rc = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, ctrl1);
- if (rc < 0) {
- dev_err(&client->dev, "Failing to start the clock\n");
- return -EIO;
- }
-
- return 0;
-}
+struct pcf85063 {
+ struct rtc_device *rtc;
+ struct regmap *regmap;
+};
static int pcf85063_rtc_read_time(struct device *dev, struct rtc_time *tm)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
int rc;
u8 regs[7];
* event, the access must be finished within one second. So, read all
* time/date registers in one turn.
*/
- rc = i2c_smbus_read_i2c_block_data(client, PCF85063_REG_SC,
- sizeof(regs), regs);
- if (rc != sizeof(regs)) {
- dev_err(&client->dev, "date/time register read error\n");
- return -EIO;
- }
+ rc = regmap_bulk_read(pcf85063->regmap, PCF85063_REG_SC, regs,
+ sizeof(regs));
+ if (rc)
+ return rc;
/* if the clock has lost its power it makes no sense to use its time */
if (regs[0] & PCF85063_REG_SC_OS) {
- dev_warn(&client->dev, "Power loss detected, invalid time\n");
+ dev_warn(&pcf85063->rtc->dev, "Power loss detected, invalid time\n");
return -EINVAL;
}
static int pcf85063_rtc_set_time(struct device *dev, struct rtc_time *tm)
{
- struct i2c_client *client = to_i2c_client(dev);
+ struct pcf85063 *pcf85063 = dev_get_drvdata(dev);
int rc;
u8 regs[7];
- u8 ctrl1;
/*
* to accurately set the time, reset the divider chain and keep it in
* reset state until all time/date registers are written
*/
- rc = pcf85063_stop_clock(client, &ctrl1);
- if (rc != 0)
+ rc = regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1,
+ PCF85063_REG_CTRL1_STOP,
+ PCF85063_REG_CTRL1_STOP);
+ if (rc)
return rc;
/* hours, minutes and seconds */
regs[6] = bin2bcd(tm->tm_year - 100);
/* write all registers at once */
- rc = i2c_smbus_write_i2c_block_data(client, PCF85063_REG_SC,
- sizeof(regs), regs);
- if (rc < 0) {
- dev_err(&client->dev, "date/time register write error\n");
+ rc = regmap_bulk_write(pcf85063->regmap, PCF85063_REG_SC,
+ regs, sizeof(regs));
+ if (rc)
return rc;
- }
/*
* Write the control register as a separate action since the size of
* the register space is different between the PCF85063TP and
* PCF85063A devices. The rollover point can not be used.
*/
- rc = pcf85063_start_clock(client, ctrl1);
- if (rc != 0)
- return rc;
-
- return 0;
+ return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1,
+ PCF85063_REG_CTRL1_STOP, 0);
}
static const struct rtc_class_ops pcf85063_rtc_ops = {
.set_time = pcf85063_rtc_set_time
};
-static int pcf85063_load_capacitance(struct i2c_client *client)
+static int pcf85063_load_capacitance(struct pcf85063 *pcf85063,
+ const struct device_node *np)
{
- u32 load;
- int rc;
- u8 reg;
-
- rc = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
- if (rc < 0)
- return rc;
-
- reg = rc;
- load = 7000;
- of_property_read_u32(client->dev.of_node, "quartz-load-femtofarads",
- &load);
+ u32 load = 7000;
+ u8 reg = 0;
+ of_property_read_u32(np, "quartz-load-femtofarads", &load);
switch (load) {
default:
- dev_warn(&client->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 7000",
+ dev_warn(&pcf85063->rtc->dev, "Unknown quartz-load-femtofarads value: %d. Assuming 7000",
load);
/* fall through */
case 7000:
- reg &= ~PCF85063_REG_CTRL1_CAP_SEL;
break;
case 12500:
- reg |= PCF85063_REG_CTRL1_CAP_SEL;
+ reg = PCF85063_REG_CTRL1_CAP_SEL;
break;
}
- rc = i2c_smbus_write_byte_data(client, PCF85063_REG_CTRL1, reg);
-
- return rc;
+ return regmap_update_bits(pcf85063->regmap, PCF85063_REG_CTRL1,
+ PCF85063_REG_CTRL1_CAP_SEL, reg);
}
+static const struct regmap_config regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0x11,
+};
+
static int pcf85063_probe(struct i2c_client *client)
{
- struct rtc_device *rtc;
+ struct pcf85063 *pcf85063;
+ unsigned int tmp;
int err;
dev_dbg(&client->dev, "%s\n", __func__);
- err = i2c_smbus_read_byte_data(client, PCF85063_REG_CTRL1);
- if (err < 0) {
+ pcf85063 = devm_kzalloc(&client->dev, sizeof(struct pcf85063),
+ GFP_KERNEL);
+ if (!pcf85063)
+ return -ENOMEM;
+
+ pcf85063->regmap = devm_regmap_init_i2c(client, ®map_config);
+ if (IS_ERR(pcf85063->regmap))
+ return PTR_ERR(pcf85063->regmap);
+
+ i2c_set_clientdata(client, pcf85063);
+
+ err = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL1, &tmp);
+ if (err) {
dev_err(&client->dev, "RTC chip is not present\n");
return err;
}
- err = pcf85063_load_capacitance(client);
+ pcf85063->rtc = devm_rtc_allocate_device(&client->dev);
+ if (IS_ERR(pcf85063->rtc))
+ return PTR_ERR(pcf85063->rtc);
+
+ err = pcf85063_load_capacitance(pcf85063, client->dev.of_node);
if (err < 0)
dev_warn(&client->dev, "failed to set xtal load capacitance: %d",
err);
- rtc = devm_rtc_allocate_device(&client->dev);
- if (IS_ERR(rtc))
- return PTR_ERR(rtc);
-
- rtc->ops = &pcf85063_rtc_ops;
- rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
- rtc->range_max = RTC_TIMESTAMP_END_2099;
+ pcf85063->rtc->ops = &pcf85063_rtc_ops;
+ pcf85063->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
+ pcf85063->rtc->range_max = RTC_TIMESTAMP_END_2099;
- return rtc_register_device(rtc);
+ return rtc_register_device(pcf85063->rtc);
}
#ifdef CONFIG_OF
projects / linux.git / commitdiff